| /dts-v1/; |
| |
| / { |
| #size-cells = <0x02>; |
| #address-cells = <0x02>; |
| model-name = "microwatt"; |
| compatible = "microwatt-soc"; |
| |
| aliases { |
| serial0 = &UART0; |
| }; |
| |
| reserved-memory { |
| #size-cells = <0x02>; |
| #address-cells = <0x02>; |
| ranges; |
| }; |
| |
| memory@0 { |
| device_type = "memory"; |
| reg = <0x00000000 0x00000000 0x00000000 0x10000000>; |
| }; |
| |
| cpus { |
| #size-cells = <0x00>; |
| #address-cells = <0x01>; |
| |
| ibm,powerpc-cpu-features { |
| display-name = "Microwatt"; |
| isa = <3000>; |
| device_type = "cpu-features"; |
| compatible = "ibm,powerpc-cpu-features"; |
| |
| mmu-radix { |
| isa = <3000>; |
| usable-privilege = <2>; |
| }; |
| |
| little-endian { |
| isa = <2050>; |
| usable-privilege = <3>; |
| hwcap-bit-nr = <1>; |
| }; |
| |
| cache-inhibited-large-page { |
| isa = <2040>; |
| usable-privilege = <2>; |
| }; |
| |
| fixed-point-v3 { |
| isa = <3000>; |
| usable-privilege = <3>; |
| }; |
| |
| no-execute { |
| isa = <2010>; |
| usable-privilege = <2>; |
| }; |
| |
| floating-point { |
| hwcap-bit-nr = <27>; |
| isa = <0>; |
| usable-privilege = <3>; |
| }; |
| }; |
| |
| PowerPC,Microwatt@0 { |
| i-cache-sets = <2>; |
| ibm,dec-bits = <64>; |
| reservation-granule-size = <64>; |
| clock-frequency = <100000000>; |
| timebase-frequency = <100000000>; |
| i-tlb-sets = <1>; |
| ibm,ppc-interrupt-server#s = <0>; |
| i-cache-block-size = <64>; |
| d-cache-block-size = <64>; |
| d-cache-sets = <2>; |
| i-tlb-size = <64>; |
| cpu-version = <0x990000>; |
| status = "okay"; |
| i-cache-size = <0x1000>; |
| ibm,processor-radix-AP-encodings = <0x0c 0xa0000010 0x20000015 0x4000001e>; |
| tlb-size = <0>; |
| tlb-sets = <0>; |
| device_type = "cpu"; |
| d-tlb-size = <128>; |
| d-tlb-sets = <2>; |
| reg = <0>; |
| general-purpose; |
| 64-bit; |
| d-cache-size = <0x1000>; |
| ibm,chip-id = <0>; |
| ibm,mmu-lpid-bits = <12>; |
| ibm,mmu-pid-bits = <20>; |
| }; |
| }; |
| |
| soc@c0000000 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| interrupt-parent = <&ICS>; |
| |
| ranges = <0 0 0xc0000000 0x40000000>; |
| |
| interrupt-controller@4000 { |
| compatible = "openpower,xics-presentation", "ibm,ppc-xicp"; |
| ibm,interrupt-server-ranges = <0x0 0x1>; |
| reg = <0x4000 0x100>; |
| }; |
| |
| ICS: interrupt-controller@5000 { |
| compatible = "openpower,xics-sources"; |
| interrupt-controller; |
| interrupt-ranges = <0x10 0x10>; |
| reg = <0x5000 0x100>; |
| #address-cells = <0>; |
| #size-cells = <0>; |
| #interrupt-cells = <2>; |
| }; |
| |
| UART0: serial@2000 { |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <0x2000 0x8>; |
| clock-frequency = <100000000>; |
| current-speed = <115200>; |
| reg-shift = <2>; |
| fifo-size = <16>; |
| interrupts = <0x10 0x1>; |
| }; |
| |
| ethernet@8020000 { |
| compatible = "litex,liteeth"; |
| reg = <0x8021000 0x100 |
| 0x8020800 0x100 |
| 0x8030000 0x2000>; |
| reg-names = "mac", "mido", "buffer"; |
| litex,rx-slots = <2>; |
| litex,tx-slots = <2>; |
| litex,slot-size = <0x800>; |
| interrupts = <0x11 0x1>; |
| }; |
| }; |
| |
| chosen { |
| bootargs = ""; |
| ibm,architecture-vec-5 = [19 00 10 00 00 00 00 00 00 00 00 00 00 00 00 00 |
| 00 00 00 00 00 00 00 00 40 00 40]; |
| stdout-path = &UART0; |
| }; |
| }; |