| # SPDX-License-Identifier: GPL-2.0-only |
| config SND_PXA2XX_SOC |
| tristate "SoC Audio for the Intel PXA2xx chip" |
| depends on ARCH_PXA || COMPILE_TEST |
| select SND_PXA2XX_LIB |
| help |
| Say Y or M if you want to add support for codecs attached to |
| the PXA2xx AC97, I2S or SSP interface. You will also need |
| to select the audio interfaces to support below. |
| |
| config SND_MMP_SOC |
| bool |
| select MMP_SRAM |
| |
| config SND_PXA2XX_AC97 |
| tristate |
| |
| config SND_PXA2XX_SOC_AC97 |
| tristate |
| select AC97_BUS_NEW |
| select SND_PXA2XX_LIB |
| select SND_PXA2XX_LIB_AC97 |
| select SND_SOC_AC97_BUS_NEW |
| |
| config SND_PXA2XX_SOC_I2S |
| select SND_PXA2XX_LIB |
| tristate |
| |
| config SND_PXA_SOC_SSP |
| tristate "Soc Audio via PXA2xx/PXA3xx SSP ports" |
| depends on PLAT_PXA |
| select PXA_SSP |
| select SND_PXA2XX_LIB |
| |
| config SND_MMP_SOC_SSPA |
| tristate "SoC Audio via MMP SSPA ports" |
| depends on ARCH_MMP |
| select SND_SOC_GENERIC_DMAENGINE_PCM |
| select SND_ARM |
| help |
| Say Y if you want to add support for codecs attached to |
| the MMP SSPA interface. |
| |
| config SND_PXA2XX_SOC_CORGI |
| tristate "SoC Audio support for Sharp Zaurus SL-C7x0" |
| depends on SND_PXA2XX_SOC && PXA_SHARP_C7xx && I2C |
| select SND_PXA2XX_SOC_I2S |
| select SND_SOC_WM8731_I2C |
| help |
| Say Y if you want to add support for SoC audio on Sharp |
| Zaurus SL-C7x0 models (Corgi, Shepherd, Husky). |
| |
| config SND_PXA2XX_SOC_SPITZ |
| tristate "SoC Audio support for Sharp Zaurus SL-Cxx00" |
| depends on SND_PXA2XX_SOC && PXA_SHARP_Cxx00 && I2C |
| select SND_PXA2XX_SOC_I2S |
| select SND_SOC_WM8750 |
| help |
| Say Y if you want to add support for SoC audio on Sharp |
| Zaurus SL-Cxx00 models (Spitz, Borzoi and Akita). |
| |
| config SND_PXA2XX_SOC_Z2 |
| tristate "SoC Audio support for Zipit Z2" |
| depends on SND_PXA2XX_SOC && MACH_ZIPIT2 && I2C |
| select SND_PXA2XX_SOC_I2S |
| select SND_SOC_WM8750 |
| help |
| Say Y if you want to add support for SoC audio on Zipit Z2. |
| |
| config SND_PXA2XX_SOC_POODLE |
| tristate "SoC Audio support for Poodle" |
| depends on SND_PXA2XX_SOC && MACH_POODLE && I2C |
| select SND_PXA2XX_SOC_I2S |
| select SND_SOC_WM8731_I2C |
| help |
| Say Y if you want to add support for SoC audio on Sharp |
| Zaurus SL-5600 model (Poodle). |
| |
| config SND_PXA2XX_SOC_TOSA |
| tristate "SoC AC97 Audio support for Tosa" |
| depends on SND_PXA2XX_SOC && MACH_TOSA |
| depends on MFD_TC6393XB |
| depends on AC97_BUS=n |
| select REGMAP |
| select AC97_BUS_NEW |
| select AC97_BUS_COMPAT |
| select SND_PXA2XX_SOC_AC97 |
| select SND_SOC_WM9712 |
| help |
| Say Y if you want to add support for SoC audio on Sharp |
| Zaurus SL-C6000x models (Tosa). |
| |
| config SND_PXA2XX_SOC_E740 |
| tristate "SoC AC97 Audio support for e740" |
| depends on SND_PXA2XX_SOC && MACH_E740 |
| depends on AC97_BUS=n |
| select REGMAP |
| select AC97_BUS_NEW |
| select AC97_BUS_COMPAT |
| select SND_SOC_WM9705 |
| select SND_PXA2XX_SOC_AC97 |
| help |
| Say Y if you want to add support for SoC audio on the |
| toshiba e740 PDA |
| |
| config SND_PXA2XX_SOC_E750 |
| tristate "SoC AC97 Audio support for e750" |
| depends on SND_PXA2XX_SOC && MACH_E750 |
| depends on AC97_BUS=n |
| select REGMAP |
| select SND_SOC_WM9705 |
| select SND_PXA2XX_SOC_AC97 |
| help |
| Say Y if you want to add support for SoC audio on the |
| toshiba e750 PDA |
| |
| config SND_PXA2XX_SOC_E800 |
| tristate "SoC AC97 Audio support for e800" |
| depends on SND_PXA2XX_SOC && MACH_E800 |
| depends on AC97_BUS=n |
| select REGMAP |
| select SND_SOC_WM9712 |
| select AC97_BUS_NEW |
| select AC97_BUS_COMPAT |
| select SND_PXA2XX_SOC_AC97 |
| help |
| Say Y if you want to add support for SoC audio on the |
| Toshiba e800 PDA |
| |
| config SND_PXA2XX_SOC_EM_X270 |
| tristate "SoC Audio support for CompuLab CM-X300" |
| depends on SND_PXA2XX_SOC && MACH_CM_X300 |
| depends on AC97_BUS=n |
| select REGMAP |
| select AC97_BUS_NEW |
| select AC97_BUS_COMPAT |
| select SND_PXA2XX_SOC_AC97 |
| select SND_SOC_WM9712 |
| help |
| Say Y if you want to add support for SoC audio on |
| CompuLab EM-x270, eXeda and CM-X300 machines. |
| |
| config SND_PXA2XX_SOC_PALM27X |
| bool "SoC Audio support for Palm T|X, T5, E2 and LifeDrive" |
| depends on SND_PXA2XX_SOC && (MACH_PALMLD || MACH_PALMTX || \ |
| MACH_PALMT5 || MACH_PALMTE2) |
| depends on AC97_BUS=n |
| select REGMAP |
| select AC97_BUS_NEW |
| select AC97_BUS_COMPAT |
| select SND_PXA2XX_SOC_AC97 |
| select SND_SOC_WM9712 |
| help |
| Say Y if you want to add support for SoC audio on |
| Palm T|X, T5, E2 or LifeDrive handheld computer. |
| |
| config SND_PXA910_SOC |
| tristate "SoC Audio for Marvell PXA910 chip" |
| depends on ARCH_MMP && SND |
| select SND_PCM |
| help |
| Say Y if you want to add support for SoC audio on the |
| Marvell PXA910 reference platform. |
| |
| config SND_SOC_TTC_DKB |
| tristate "SoC Audio support for TTC DKB" |
| depends on SND_PXA910_SOC && MACH_TTC_DKB && I2C=y |
| select PXA_SSP |
| select SND_PXA_SOC_SSP |
| select SND_MMP_SOC |
| select MFD_88PM860X |
| select SND_SOC_88PM860X |
| help |
| Say Y if you want to add support for SoC audio on TTC DKB |
| |
| |
| config SND_SOC_ZYLONITE |
| tristate "SoC Audio support for Marvell Zylonite" |
| depends on SND_PXA2XX_SOC && MACH_ZYLONITE |
| depends on AC97_BUS=n |
| select AC97_BUS_NEW |
| select AC97_BUS_COMPAT |
| select SND_PXA2XX_SOC_AC97 |
| select REGMAP |
| select SND_PXA_SOC_SSP |
| select SND_SOC_WM9713 |
| help |
| Say Y if you want to add support for SoC audio on the |
| Marvell Zylonite reference platform. |
| |
| config SND_PXA2XX_SOC_HX4700 |
| tristate "SoC Audio support for HP iPAQ hx4700" |
| depends on SND_PXA2XX_SOC && MACH_H4700 && I2C |
| select SND_PXA2XX_SOC_I2S |
| select SND_SOC_AK4641 |
| help |
| Say Y if you want to add support for SoC audio on the |
| HP iPAQ hx4700. |
| |
| config SND_PXA2XX_SOC_MAGICIAN |
| tristate "SoC Audio support for HTC Magician" |
| depends on SND_PXA2XX_SOC && MACH_MAGICIAN && I2C |
| select SND_PXA2XX_SOC_I2S |
| select SND_PXA_SOC_SSP |
| select SND_SOC_UDA1380 |
| help |
| Say Y if you want to add support for SoC audio on the |
| HTC Magician. |
| |
| config SND_PXA2XX_SOC_MIOA701 |
| tristate "SoC Audio support for MIO A701" |
| depends on SND_PXA2XX_SOC && MACH_MIOA701 |
| depends on AC97_BUS=n |
| select REGMAP |
| select AC97_BUS_NEW |
| select AC97_BUS_COMPAT |
| select SND_PXA2XX_SOC_AC97 |
| select SND_SOC_WM9713 |
| help |
| Say Y if you want to add support for SoC audio on the |
| MIO A701. |
| |
| config SND_MMP_SOC_BROWNSTONE |
| tristate "SoC Audio support for Marvell Brownstone" |
| depends on SND_MMP_SOC_SSPA && MACH_BROWNSTONE && I2C |
| select SND_MMP_SOC |
| select MFD_WM8994 |
| select SND_SOC_WM8994 |
| help |
| Say Y if you want to add support for SoC audio on the |
| Marvell Brownstone reference platform. |