| // SPDX-License-Identifier: GPL-2.0+ OR MIT |
| // |
| // Device Tree Source for Akebi96 Development Board |
| // |
| // Derived from uniphier-ld20-global.dts. |
| // |
| // Copyright (C) 2015-2017 Socionext Inc. |
| // Copyright (C) 2019-2020 Linaro Ltd. |
| |
| /dts-v1/; |
| #include <dt-bindings/gpio/uniphier-gpio.h> |
| #include "uniphier-ld20.dtsi" |
| |
| / { |
| model = "Akebi96"; |
| compatible = "socionext,uniphier-ld20-akebi96", |
| "socionext,uniphier-ld20"; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| aliases { |
| serial0 = &serial0; |
| serial1 = &serial1; |
| serial2 = &serial2; |
| serial3 = &serial3; |
| i2c0 = &i2c0; |
| i2c1 = &i2c1; |
| i2c2 = &i2c2; |
| i2c3 = &i2c3; |
| i2c4 = &i2c4; |
| i2c5 = &i2c5; |
| spi0 = &spi0; |
| spi1 = &spi1; |
| spi2 = &spi2; |
| spi3 = &spi3; |
| ethernet0 = ð |
| }; |
| |
| memory@80000000 { |
| device_type = "memory"; |
| reg = <0 0x80000000 0 0xc0000000>; |
| }; |
| |
| framebuffer@c0000000 { |
| compatible = "simple-framebuffer"; |
| reg = <0 0xc0000000 0 0x02000000>; |
| width = <1920>; |
| height = <1080>; |
| stride = <7680>; |
| format = "a8r8g8b8"; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| memory@c0000000 { |
| reg = <0 0xc0000000 0 0x02000000>; |
| no-map; |
| }; |
| }; |
| |
| sound { |
| compatible = "audio-graph-card"; |
| label = "UniPhier LD20"; |
| dais = <&spdif_port0 |
| &comp_spdif_port0>; |
| }; |
| |
| spdif-out { |
| compatible = "linux,spdif-dit"; |
| #sound-dai-cells = <0>; |
| |
| port@0 { |
| spdif_tx: endpoint { |
| remote-endpoint = <&spdif_hiecout1>; |
| }; |
| }; |
| }; |
| |
| comp-spdif-out { |
| compatible = "linux,spdif-dit"; |
| #sound-dai-cells = <0>; |
| |
| port@0 { |
| comp_spdif_tx: endpoint { |
| remote-endpoint = <&comp_spdif_hiecout1>; |
| }; |
| }; |
| }; |
| |
| firmware { |
| optee { |
| compatible = "linaro,optee-tz"; |
| method = "smc"; |
| }; |
| }; |
| }; |
| |
| &spi3 { |
| status = "okay"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| usb-over-spi@0 { |
| compatible = "maxim,max3421-udc"; |
| reg = <0>; |
| spi-max-frequency = <12500000>; |
| interrupt-parent = <&gpio>; |
| interrupt-names = "udc"; |
| interrupts = <0 IRQ_TYPE_EDGE_FALLING>; |
| }; |
| }; |
| |
| &serial0 { |
| /* Onboard USB-UART */ |
| status = "okay"; |
| }; |
| |
| &serial2 { |
| /* LS connector UART1 */ |
| status = "okay"; |
| }; |
| |
| &serial3 { |
| /* LS connector UART0 */ |
| status = "okay"; |
| }; |
| |
| &spdif_hiecout1 { |
| remote-endpoint = <&spdif_tx>; |
| }; |
| |
| &comp_spdif_hiecout1 { |
| remote-endpoint = <&comp_spdif_tx>; |
| }; |
| |
| &i2c0 { |
| /* LS connector I2C0 */ |
| status = "okay"; |
| }; |
| |
| &i2c1 { |
| /* LS connector I2C1 */ |
| status = "okay"; |
| }; |
| |
| ð { |
| status = "okay"; |
| phy-handle = <ðphy>; |
| }; |
| |
| &mdio { |
| ethphy: ethernet-phy@0 { |
| reg = <0>; |
| }; |
| }; |
| |
| &usb { |
| status = "okay"; |
| }; |
| |
| &pcie { |
| status = "okay"; |
| }; |
| |
| &gpio { |
| /* IRQs for Max3421 */ |
| xirq0-hog { |
| gpio-hog; |
| gpios = <UNIPHIER_GPIO_IRQ(0) 1>; |
| input; |
| }; |
| xirq10-hog { |
| gpio-hog; |
| gpios = <UNIPHIER_GPIO_IRQ(10) 1>; |
| input; |
| }; |
| }; |
| |
| &pinctrl_aout1 { |
| groups = "aout1b"; |
| }; |
| |
| &pinctrl_uart3 { |
| groups = "uart3", "uart3_ctsrts"; |
| }; |