| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * arch/powerpc/platforms/83xx/mpc832x_rdb.c |
| * |
| * Copyright (C) Freescale Semiconductor, Inc. 2007. All rights reserved. |
| * |
| * Description: |
| * MPC832x RDB board specific routines. |
| * This file is based on mpc832x_mds.c and mpc8313_rdb.c |
| * Author: Michael Barkowski <michael.barkowski@freescale.com> |
| */ |
| |
| #include <linux/pci.h> |
| #include <linux/interrupt.h> |
| #include <linux/spi/spi.h> |
| #include <linux/spi/mmc_spi.h> |
| #include <linux/mmc/host.h> |
| #include <linux/of_irq.h> |
| #include <linux/of_platform.h> |
| #include <linux/fsl_devices.h> |
| |
| #include <asm/time.h> |
| #include <asm/ipic.h> |
| #include <asm/udbg.h> |
| #include <soc/fsl/qe/qe.h> |
| #include <sysdev/fsl_soc.h> |
| #include <sysdev/fsl_pci.h> |
| |
| #include "mpc83xx.h" |
| |
| #undef DEBUG |
| #ifdef DEBUG |
| #define DBG(fmt...) udbg_printf(fmt) |
| #else |
| #define DBG(fmt...) |
| #endif |
| |
| #ifdef CONFIG_QUICC_ENGINE |
| static int __init of_fsl_spi_probe(char *type, char *compatible, u32 sysclk, |
| struct spi_board_info *board_infos, |
| unsigned int num_board_infos, |
| void (*cs_control)(struct spi_device *dev, |
| bool on)) |
| { |
| struct device_node *np; |
| unsigned int i = 0; |
| |
| for_each_compatible_node(np, type, compatible) { |
| int ret; |
| unsigned int j; |
| const void *prop; |
| struct resource res[2]; |
| struct platform_device *pdev; |
| struct fsl_spi_platform_data pdata = { |
| .cs_control = cs_control, |
| }; |
| |
| memset(res, 0, sizeof(res)); |
| |
| pdata.sysclk = sysclk; |
| |
| prop = of_get_property(np, "reg", NULL); |
| if (!prop) |
| goto err; |
| pdata.bus_num = *(u32 *)prop; |
| |
| prop = of_get_property(np, "cell-index", NULL); |
| if (prop) |
| i = *(u32 *)prop; |
| |
| prop = of_get_property(np, "mode", NULL); |
| if (prop && !strcmp(prop, "cpu-qe")) |
| pdata.flags = SPI_QE_CPU_MODE; |
| |
| for (j = 0; j < num_board_infos; j++) { |
| if (board_infos[j].bus_num == pdata.bus_num) |
| pdata.max_chipselect++; |
| } |
| |
| if (!pdata.max_chipselect) |
| continue; |
| |
| ret = of_address_to_resource(np, 0, &res[0]); |
| if (ret) |
| goto err; |
| |
| ret = of_irq_to_resource(np, 0, &res[1]); |
| if (ret <= 0) |
| goto err; |
| |
| pdev = platform_device_alloc("mpc83xx_spi", i); |
| if (!pdev) |
| goto err; |
| |
| ret = platform_device_add_data(pdev, &pdata, sizeof(pdata)); |
| if (ret) |
| goto unreg; |
| |
| ret = platform_device_add_resources(pdev, res, |
| ARRAY_SIZE(res)); |
| if (ret) |
| goto unreg; |
| |
| ret = platform_device_add(pdev); |
| if (ret) |
| goto unreg; |
| |
| goto next; |
| unreg: |
| platform_device_put(pdev); |
| err: |
| pr_err("%pOF: registration failed\n", np); |
| next: |
| i++; |
| } |
| |
| return i; |
| } |
| |
| static int __init fsl_spi_init(struct spi_board_info *board_infos, |
| unsigned int num_board_infos, |
| void (*cs_control)(struct spi_device *spi, |
| bool on)) |
| { |
| u32 sysclk = -1; |
| int ret; |
| |
| /* SPI controller is either clocked from QE or SoC clock */ |
| sysclk = get_brgfreq(); |
| if (sysclk == -1) { |
| sysclk = fsl_get_sys_freq(); |
| if (sysclk == -1) |
| return -ENODEV; |
| } |
| |
| ret = of_fsl_spi_probe(NULL, "fsl,spi", sysclk, board_infos, |
| num_board_infos, cs_control); |
| if (!ret) |
| of_fsl_spi_probe("spi", "fsl_spi", sysclk, board_infos, |
| num_board_infos, cs_control); |
| |
| return spi_register_board_info(board_infos, num_board_infos); |
| } |
| |
| static void mpc83xx_spi_cs_control(struct spi_device *spi, bool on) |
| { |
| pr_debug("%s %d %d\n", __func__, spi_get_chipselect(spi, 0), on); |
| par_io_data_set(3, 13, on); |
| } |
| |
| static struct mmc_spi_platform_data mpc832x_mmc_pdata = { |
| .ocr_mask = MMC_VDD_33_34, |
| }; |
| |
| static struct spi_board_info mpc832x_spi_boardinfo = { |
| .bus_num = 0x4c0, |
| .chip_select = 0, |
| .max_speed_hz = 50000000, |
| .modalias = "mmc_spi", |
| .platform_data = &mpc832x_mmc_pdata, |
| }; |
| |
| static int __init mpc832x_spi_init(void) |
| { |
| struct device_node *np; |
| |
| par_io_config_pin(3, 0, 3, 0, 1, 0); /* SPI1 MOSI, I/O */ |
| par_io_config_pin(3, 1, 3, 0, 1, 0); /* SPI1 MISO, I/O */ |
| par_io_config_pin(3, 2, 3, 0, 1, 0); /* SPI1 CLK, I/O */ |
| par_io_config_pin(3, 3, 2, 0, 1, 0); /* SPI1 SEL, I */ |
| |
| par_io_config_pin(3, 13, 1, 0, 0, 0); /* !SD_CS, O */ |
| par_io_config_pin(3, 14, 2, 0, 0, 0); /* SD_INSERT, I */ |
| par_io_config_pin(3, 15, 2, 0, 0, 0); /* SD_PROTECT,I */ |
| |
| /* |
| * Don't bother with legacy stuff when device tree contains |
| * mmc-spi-slot node. |
| */ |
| np = of_find_compatible_node(NULL, NULL, "mmc-spi-slot"); |
| of_node_put(np); |
| if (np) |
| return 0; |
| return fsl_spi_init(&mpc832x_spi_boardinfo, 1, mpc83xx_spi_cs_control); |
| } |
| machine_device_initcall(mpc832x_rdb, mpc832x_spi_init); |
| #endif /* CONFIG_QUICC_ENGINE */ |
| |
| /* ************************************************************************ |
| * |
| * Setup the architecture |
| * |
| */ |
| static void __init mpc832x_rdb_setup_arch(void) |
| { |
| #if defined(CONFIG_QUICC_ENGINE) |
| struct device_node *np; |
| #endif |
| |
| mpc83xx_setup_arch(); |
| |
| #ifdef CONFIG_QUICC_ENGINE |
| if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) { |
| par_io_init(np); |
| of_node_put(np); |
| |
| for_each_node_by_name(np, "ucc") |
| par_io_of_config(np); |
| } |
| #endif /* CONFIG_QUICC_ENGINE */ |
| } |
| |
| machine_device_initcall(mpc832x_rdb, mpc83xx_declare_of_platform_devices); |
| |
| define_machine(mpc832x_rdb) { |
| .name = "MPC832x RDB", |
| .compatible = "MPC832xRDB", |
| .setup_arch = mpc832x_rdb_setup_arch, |
| .discover_phbs = mpc83xx_setup_pci, |
| .init_IRQ = mpc83xx_ipic_init_IRQ, |
| .get_irq = ipic_get_irq, |
| .restart = mpc83xx_restart, |
| .time_init = mpc83xx_time_init, |
| .progress = udbg_progress, |
| }; |