| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright 2006-2008, IBM Corporation. |
| */ |
| |
| #undef DEBUG |
| |
| #include <linux/types.h> |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/smp.h> |
| #include <linux/reboot.h> |
| #include <linux/kexec.h> |
| #include <linux/crash_dump.h> |
| #include <linux/of.h> |
| |
| #include <asm/kexec.h> |
| #include <asm/reg.h> |
| #include <asm/io.h> |
| #include <asm/machdep.h> |
| #include <asm/rtas.h> |
| #include <asm/cell-regs.h> |
| |
| #include "ras.h" |
| |
| |
| static void dump_fir(int cpu) |
| { |
| struct cbe_pmd_regs __iomem *pregs = cbe_get_cpu_pmd_regs(cpu); |
| struct cbe_iic_regs __iomem *iregs = cbe_get_cpu_iic_regs(cpu); |
| |
| if (pregs == NULL) |
| return; |
| |
| /* Todo: do some nicer parsing of bits and based on them go down |
| * to other sub-units FIRs and not only IIC |
| */ |
| printk(KERN_ERR "Global Checkstop FIR : 0x%016llx\n", |
| in_be64(&pregs->checkstop_fir)); |
| printk(KERN_ERR "Global Recoverable FIR : 0x%016llx\n", |
| in_be64(&pregs->checkstop_fir)); |
| printk(KERN_ERR "Global MachineCheck FIR : 0x%016llx\n", |
| in_be64(&pregs->spec_att_mchk_fir)); |
| |
| if (iregs == NULL) |
| return; |
| printk(KERN_ERR "IOC FIR : 0x%016llx\n", |
| in_be64(&iregs->ioc_fir)); |
| |
| } |
| |
| DEFINE_INTERRUPT_HANDLER(cbe_system_error_exception) |
| { |
| int cpu = smp_processor_id(); |
| |
| printk(KERN_ERR "System Error Interrupt on CPU %d !\n", cpu); |
| dump_fir(cpu); |
| dump_stack(); |
| } |
| |
| DEFINE_INTERRUPT_HANDLER(cbe_maintenance_exception) |
| { |
| int cpu = smp_processor_id(); |
| |
| /* |
| * Nothing implemented for the maintenance interrupt at this point |
| */ |
| |
| printk(KERN_ERR "Unhandled Maintenance interrupt on CPU %d !\n", cpu); |
| dump_stack(); |
| } |
| |
| DEFINE_INTERRUPT_HANDLER(cbe_thermal_exception) |
| { |
| int cpu = smp_processor_id(); |
| |
| /* |
| * Nothing implemented for the thermal interrupt at this point |
| */ |
| |
| printk(KERN_ERR "Unhandled Thermal interrupt on CPU %d !\n", cpu); |
| dump_stack(); |
| } |
| |
| static int cbe_machine_check_handler(struct pt_regs *regs) |
| { |
| int cpu = smp_processor_id(); |
| |
| printk(KERN_ERR "Machine Check Interrupt on CPU %d !\n", cpu); |
| dump_fir(cpu); |
| |
| /* No recovery from this code now, lets continue */ |
| return 0; |
| } |
| |
| struct ptcal_area { |
| struct list_head list; |
| int nid; |
| int order; |
| struct page *pages; |
| }; |
| |
| static LIST_HEAD(ptcal_list); |
| |
| static int ptcal_start_tok, ptcal_stop_tok; |
| |
| static int __init cbe_ptcal_enable_on_node(int nid, int order) |
| { |
| struct ptcal_area *area; |
| int ret = -ENOMEM; |
| unsigned long addr; |
| |
| if (is_kdump_kernel()) |
| rtas_call(ptcal_stop_tok, 1, 1, NULL, nid); |
| |
| area = kmalloc(sizeof(*area), GFP_KERNEL); |
| if (!area) |
| goto out_err; |
| |
| area->nid = nid; |
| area->order = order; |
| area->pages = __alloc_pages_node(area->nid, |
| GFP_KERNEL|__GFP_THISNODE, |
| area->order); |
| |
| if (!area->pages) { |
| printk(KERN_WARNING "%s: no page on node %d\n", |
| __func__, area->nid); |
| goto out_free_area; |
| } |
| |
| /* |
| * We move the ptcal area to the middle of the allocated |
| * page, in order to avoid prefetches in memcpy and similar |
| * functions stepping on it. |
| */ |
| addr = __pa(page_address(area->pages)) + (PAGE_SIZE >> 1); |
| printk(KERN_DEBUG "%s: enabling PTCAL on node %d address=0x%016lx\n", |
| __func__, area->nid, addr); |
| |
| ret = -EIO; |
| if (rtas_call(ptcal_start_tok, 3, 1, NULL, area->nid, |
| (unsigned int)(addr >> 32), |
| (unsigned int)(addr & 0xffffffff))) { |
| printk(KERN_ERR "%s: error enabling PTCAL on node %d!\n", |
| __func__, nid); |
| goto out_free_pages; |
| } |
| |
| list_add(&area->list, &ptcal_list); |
| |
| return 0; |
| |
| out_free_pages: |
| __free_pages(area->pages, area->order); |
| out_free_area: |
| kfree(area); |
| out_err: |
| return ret; |
| } |
| |
| static int __init cbe_ptcal_enable(void) |
| { |
| const u32 *size; |
| struct device_node *np; |
| int order, found_mic = 0; |
| |
| np = of_find_node_by_path("/rtas"); |
| if (!np) |
| return -ENODEV; |
| |
| size = of_get_property(np, "ibm,cbe-ptcal-size", NULL); |
| if (!size) { |
| of_node_put(np); |
| return -ENODEV; |
| } |
| |
| pr_debug("%s: enabling PTCAL, size = 0x%x\n", __func__, *size); |
| order = get_order(*size); |
| of_node_put(np); |
| |
| /* support for malta device trees, with be@/mic@ nodes */ |
| for_each_node_by_type(np, "mic-tm") { |
| cbe_ptcal_enable_on_node(of_node_to_nid(np), order); |
| found_mic = 1; |
| } |
| |
| if (found_mic) |
| return 0; |
| |
| /* support for older device tree - use cpu nodes */ |
| for_each_node_by_type(np, "cpu") { |
| const u32 *nid = of_get_property(np, "node-id", NULL); |
| if (!nid) { |
| printk(KERN_ERR "%s: node %pOF is missing node-id?\n", |
| __func__, np); |
| continue; |
| } |
| cbe_ptcal_enable_on_node(*nid, order); |
| found_mic = 1; |
| } |
| |
| return found_mic ? 0 : -ENODEV; |
| } |
| |
| static int cbe_ptcal_disable(void) |
| { |
| struct ptcal_area *area, *tmp; |
| int ret = 0; |
| |
| pr_debug("%s: disabling PTCAL\n", __func__); |
| |
| list_for_each_entry_safe(area, tmp, &ptcal_list, list) { |
| /* disable ptcal on this node */ |
| if (rtas_call(ptcal_stop_tok, 1, 1, NULL, area->nid)) { |
| printk(KERN_ERR "%s: error disabling PTCAL " |
| "on node %d!\n", __func__, |
| area->nid); |
| ret = -EIO; |
| continue; |
| } |
| |
| /* ensure we can access the PTCAL area */ |
| memset(page_address(area->pages), 0, |
| 1 << (area->order + PAGE_SHIFT)); |
| |
| /* clean up */ |
| list_del(&area->list); |
| __free_pages(area->pages, area->order); |
| kfree(area); |
| } |
| |
| return ret; |
| } |
| |
| static int cbe_ptcal_notify_reboot(struct notifier_block *nb, |
| unsigned long code, void *data) |
| { |
| return cbe_ptcal_disable(); |
| } |
| |
| static void cbe_ptcal_crash_shutdown(void) |
| { |
| cbe_ptcal_disable(); |
| } |
| |
| static struct notifier_block cbe_ptcal_reboot_notifier = { |
| .notifier_call = cbe_ptcal_notify_reboot |
| }; |
| |
| #ifdef CONFIG_PPC_IBM_CELL_RESETBUTTON |
| static int sysreset_hack; |
| |
| static int __init cbe_sysreset_init(void) |
| { |
| struct cbe_pmd_regs __iomem *regs; |
| |
| sysreset_hack = of_machine_is_compatible("IBM,CBPLUS-1.0"); |
| if (!sysreset_hack) |
| return 0; |
| |
| regs = cbe_get_cpu_pmd_regs(0); |
| if (!regs) |
| return 0; |
| |
| /* Enable JTAG system-reset hack */ |
| out_be32(®s->fir_mode_reg, |
| in_be32(®s->fir_mode_reg) | |
| CBE_PMD_FIR_MODE_M8); |
| |
| return 0; |
| } |
| device_initcall(cbe_sysreset_init); |
| |
| int cbe_sysreset_hack(void) |
| { |
| struct cbe_pmd_regs __iomem *regs; |
| |
| /* |
| * The BMC can inject user triggered system reset exceptions, |
| * but cannot set the system reset reason in srr1, |
| * so check an extra register here. |
| */ |
| if (sysreset_hack && (smp_processor_id() == 0)) { |
| regs = cbe_get_cpu_pmd_regs(0); |
| if (!regs) |
| return 0; |
| if (in_be64(®s->ras_esc_0) & 0x0000ffff) { |
| out_be64(®s->ras_esc_0, 0); |
| return 0; |
| } |
| } |
| return 1; |
| } |
| #endif /* CONFIG_PPC_IBM_CELL_RESETBUTTON */ |
| |
| static int __init cbe_ptcal_init(void) |
| { |
| int ret; |
| ptcal_start_tok = rtas_function_token(RTAS_FN_IBM_CBE_START_PTCAL); |
| ptcal_stop_tok = rtas_function_token(RTAS_FN_IBM_CBE_STOP_PTCAL); |
| |
| if (ptcal_start_tok == RTAS_UNKNOWN_SERVICE |
| || ptcal_stop_tok == RTAS_UNKNOWN_SERVICE) |
| return -ENODEV; |
| |
| ret = register_reboot_notifier(&cbe_ptcal_reboot_notifier); |
| if (ret) |
| goto out1; |
| |
| ret = crash_shutdown_register(&cbe_ptcal_crash_shutdown); |
| if (ret) |
| goto out2; |
| |
| return cbe_ptcal_enable(); |
| |
| out2: |
| unregister_reboot_notifier(&cbe_ptcal_reboot_notifier); |
| out1: |
| printk(KERN_ERR "Can't disable PTCAL, so not enabling\n"); |
| return ret; |
| } |
| |
| arch_initcall(cbe_ptcal_init); |
| |
| void __init cbe_ras_init(void) |
| { |
| unsigned long hid0; |
| |
| /* |
| * Enable System Error & thermal interrupts and wakeup conditions |
| */ |
| |
| hid0 = mfspr(SPRN_HID0); |
| hid0 |= HID0_CBE_THERM_INT_EN | HID0_CBE_THERM_WAKEUP | |
| HID0_CBE_SYSERR_INT_EN | HID0_CBE_SYSERR_WAKEUP; |
| mtspr(SPRN_HID0, hid0); |
| mb(); |
| |
| /* |
| * Install machine check handler. Leave setting of precise mode to |
| * what the firmware did for now |
| */ |
| ppc_md.machine_check_exception = cbe_machine_check_handler; |
| mb(); |
| |
| /* |
| * For now, we assume that IOC_FIR is already set to forward some |
| * error conditions to the System Error handler. If that is not true |
| * then it will have to be fixed up here. |
| */ |
| } |