| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * 64-bit pSeries and RS/6000 setup code. |
| * |
| * Copyright (C) 1995 Linus Torvalds |
| * Adapted from 'alpha' version by Gary Thomas |
| * Modified by Cort Dougan (cort@cs.nmt.edu) |
| * Modified by PPC64 Team, IBM Corp |
| */ |
| |
| /* |
| * bootup setup stuff.. |
| */ |
| |
| #include <linux/cpu.h> |
| #include <linux/errno.h> |
| #include <linux/platform_device.h> |
| #include <linux/sched.h> |
| #include <linux/kernel.h> |
| #include <linux/mm.h> |
| #include <linux/stddef.h> |
| #include <linux/unistd.h> |
| #include <linux/user.h> |
| #include <linux/tty.h> |
| #include <linux/major.h> |
| #include <linux/interrupt.h> |
| #include <linux/reboot.h> |
| #include <linux/init.h> |
| #include <linux/ioport.h> |
| #include <linux/console.h> |
| #include <linux/pci.h> |
| #include <linux/utsname.h> |
| #include <linux/adb.h> |
| #include <linux/export.h> |
| #include <linux/delay.h> |
| #include <linux/irq.h> |
| #include <linux/seq_file.h> |
| #include <linux/root_dev.h> |
| #include <linux/of.h> |
| #include <linux/of_irq.h> |
| #include <linux/of_pci.h> |
| #include <linux/memblock.h> |
| #include <linux/swiotlb.h> |
| #include <linux/seq_buf.h> |
| |
| #include <asm/mmu.h> |
| #include <asm/processor.h> |
| #include <asm/io.h> |
| #include <asm/rtas.h> |
| #include <asm/pci-bridge.h> |
| #include <asm/iommu.h> |
| #include <asm/dma.h> |
| #include <asm/machdep.h> |
| #include <asm/irq.h> |
| #include <asm/time.h> |
| #include <asm/nvram.h> |
| #include <asm/pmc.h> |
| #include <asm/xics.h> |
| #include <asm/xive.h> |
| #include <asm/papr-sysparm.h> |
| #include <asm/ppc-pci.h> |
| #include <asm/i8259.h> |
| #include <asm/udbg.h> |
| #include <asm/smp.h> |
| #include <asm/firmware.h> |
| #include <asm/eeh.h> |
| #include <asm/reg.h> |
| #include <asm/plpar_wrappers.h> |
| #include <asm/kexec.h> |
| #include <asm/isa-bridge.h> |
| #include <asm/security_features.h> |
| #include <asm/asm-const.h> |
| #include <asm/idle.h> |
| #include <asm/swiotlb.h> |
| #include <asm/svm.h> |
| #include <asm/dtl.h> |
| #include <asm/hvconsole.h> |
| #include <asm/setup.h> |
| |
| #include "pseries.h" |
| |
| DEFINE_STATIC_KEY_FALSE(shared_processor); |
| EXPORT_SYMBOL(shared_processor); |
| |
| #ifdef CONFIG_PARAVIRT_TIME_ACCOUNTING |
| struct static_key paravirt_steal_enabled; |
| struct static_key paravirt_steal_rq_enabled; |
| |
| static bool steal_acc = true; |
| static int __init parse_no_stealacc(char *arg) |
| { |
| steal_acc = false; |
| return 0; |
| } |
| |
| early_param("no-steal-acc", parse_no_stealacc); |
| #endif |
| |
| int CMO_PrPSP = -1; |
| int CMO_SecPSP = -1; |
| unsigned long CMO_PageSize = (ASM_CONST(1) << IOMMU_PAGE_SHIFT_4K); |
| EXPORT_SYMBOL(CMO_PageSize); |
| |
| int fwnmi_active; /* TRUE if an FWNMI handler is present */ |
| int ibm_nmi_interlock_token; |
| u32 pseries_security_flavor; |
| |
| static void pSeries_show_cpuinfo(struct seq_file *m) |
| { |
| struct device_node *root; |
| const char *model = ""; |
| |
| root = of_find_node_by_path("/"); |
| if (root) |
| model = of_get_property(root, "model", NULL); |
| seq_printf(m, "machine\t\t: CHRP %s\n", model); |
| of_node_put(root); |
| if (radix_enabled()) |
| seq_printf(m, "MMU\t\t: Radix\n"); |
| else |
| seq_printf(m, "MMU\t\t: Hash\n"); |
| } |
| |
| /* Initialize firmware assisted non-maskable interrupts if |
| * the firmware supports this feature. |
| */ |
| static void __init fwnmi_init(void) |
| { |
| unsigned long system_reset_addr, machine_check_addr; |
| u8 *mce_data_buf; |
| unsigned int i; |
| int nr_cpus = num_possible_cpus(); |
| #ifdef CONFIG_PPC_64S_HASH_MMU |
| struct slb_entry *slb_ptr; |
| size_t size; |
| #endif |
| int ibm_nmi_register_token; |
| |
| ibm_nmi_register_token = rtas_function_token(RTAS_FN_IBM_NMI_REGISTER); |
| if (ibm_nmi_register_token == RTAS_UNKNOWN_SERVICE) |
| return; |
| |
| ibm_nmi_interlock_token = rtas_function_token(RTAS_FN_IBM_NMI_INTERLOCK); |
| if (WARN_ON(ibm_nmi_interlock_token == RTAS_UNKNOWN_SERVICE)) |
| return; |
| |
| /* If the kernel's not linked at zero we point the firmware at low |
| * addresses anyway, and use a trampoline to get to the real code. */ |
| system_reset_addr = __pa(system_reset_fwnmi) - PHYSICAL_START; |
| machine_check_addr = __pa(machine_check_fwnmi) - PHYSICAL_START; |
| |
| if (0 == rtas_call(ibm_nmi_register_token, 2, 1, NULL, |
| system_reset_addr, machine_check_addr)) |
| fwnmi_active = 1; |
| |
| /* |
| * Allocate a chunk for per cpu buffer to hold rtas errorlog. |
| * It will be used in real mode mce handler, hence it needs to be |
| * below RMA. |
| */ |
| mce_data_buf = memblock_alloc_try_nid_raw(RTAS_ERROR_LOG_MAX * nr_cpus, |
| RTAS_ERROR_LOG_MAX, MEMBLOCK_LOW_LIMIT, |
| ppc64_rma_size, NUMA_NO_NODE); |
| if (!mce_data_buf) |
| panic("Failed to allocate %d bytes below %pa for MCE buffer\n", |
| RTAS_ERROR_LOG_MAX * nr_cpus, &ppc64_rma_size); |
| |
| for_each_possible_cpu(i) { |
| paca_ptrs[i]->mce_data_buf = mce_data_buf + |
| (RTAS_ERROR_LOG_MAX * i); |
| } |
| |
| #ifdef CONFIG_PPC_64S_HASH_MMU |
| if (!radix_enabled()) { |
| /* Allocate per cpu area to save old slb contents during MCE */ |
| size = sizeof(struct slb_entry) * mmu_slb_size * nr_cpus; |
| slb_ptr = memblock_alloc_try_nid_raw(size, |
| sizeof(struct slb_entry), MEMBLOCK_LOW_LIMIT, |
| ppc64_rma_size, NUMA_NO_NODE); |
| if (!slb_ptr) |
| panic("Failed to allocate %zu bytes below %pa for slb area\n", |
| size, &ppc64_rma_size); |
| |
| for_each_possible_cpu(i) |
| paca_ptrs[i]->mce_faulty_slbs = slb_ptr + (mmu_slb_size * i); |
| } |
| #endif |
| } |
| |
| /* |
| * Affix a device for the first timer to the platform bus if |
| * we have firmware support for the H_WATCHDOG hypercall. |
| */ |
| static __init int pseries_wdt_init(void) |
| { |
| if (firmware_has_feature(FW_FEATURE_WATCHDOG)) |
| platform_device_register_simple("pseries-wdt", 0, NULL, 0); |
| return 0; |
| } |
| machine_subsys_initcall(pseries, pseries_wdt_init); |
| |
| static void pseries_8259_cascade(struct irq_desc *desc) |
| { |
| struct irq_chip *chip = irq_desc_get_chip(desc); |
| unsigned int cascade_irq = i8259_irq(); |
| |
| if (cascade_irq) |
| generic_handle_irq(cascade_irq); |
| |
| chip->irq_eoi(&desc->irq_data); |
| } |
| |
| static void __init pseries_setup_i8259_cascade(void) |
| { |
| struct device_node *np, *old, *found = NULL; |
| unsigned int cascade; |
| const u32 *addrp; |
| unsigned long intack = 0; |
| int naddr; |
| |
| for_each_node_by_type(np, "interrupt-controller") { |
| if (of_device_is_compatible(np, "chrp,iic")) { |
| found = np; |
| break; |
| } |
| } |
| |
| if (found == NULL) { |
| printk(KERN_DEBUG "pic: no ISA interrupt controller\n"); |
| return; |
| } |
| |
| cascade = irq_of_parse_and_map(found, 0); |
| if (!cascade) { |
| printk(KERN_ERR "pic: failed to map cascade interrupt"); |
| return; |
| } |
| pr_debug("pic: cascade mapped to irq %d\n", cascade); |
| |
| for (old = of_node_get(found); old != NULL ; old = np) { |
| np = of_get_parent(old); |
| of_node_put(old); |
| if (np == NULL) |
| break; |
| if (!of_node_name_eq(np, "pci")) |
| continue; |
| addrp = of_get_property(np, "8259-interrupt-acknowledge", NULL); |
| if (addrp == NULL) |
| continue; |
| naddr = of_n_addr_cells(np); |
| intack = addrp[naddr-1]; |
| if (naddr > 1) |
| intack |= ((unsigned long)addrp[naddr-2]) << 32; |
| } |
| if (intack) |
| printk(KERN_DEBUG "pic: PCI 8259 intack at 0x%016lx\n", intack); |
| i8259_init(found, intack); |
| of_node_put(found); |
| irq_set_chained_handler(cascade, pseries_8259_cascade); |
| } |
| |
| static void __init pseries_init_irq(void) |
| { |
| /* Try using a XIVE if available, otherwise use a XICS */ |
| if (!xive_spapr_init()) { |
| xics_init(); |
| pseries_setup_i8259_cascade(); |
| } |
| } |
| |
| static void pseries_lpar_enable_pmcs(void) |
| { |
| unsigned long set, reset; |
| |
| set = 1UL << 63; |
| reset = 0; |
| plpar_hcall_norets(H_PERFMON, set, reset); |
| } |
| |
| static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *data) |
| { |
| struct of_reconfig_data *rd = data; |
| struct device_node *parent, *np = rd->dn; |
| struct pci_dn *pdn; |
| int err = NOTIFY_OK; |
| |
| switch (action) { |
| case OF_RECONFIG_ATTACH_NODE: |
| parent = of_get_parent(np); |
| pdn = parent ? PCI_DN(parent) : NULL; |
| if (pdn) |
| pci_add_device_node_info(pdn->phb, np); |
| |
| of_node_put(parent); |
| break; |
| case OF_RECONFIG_DETACH_NODE: |
| pdn = PCI_DN(np); |
| if (pdn) |
| list_del(&pdn->list); |
| break; |
| default: |
| err = NOTIFY_DONE; |
| break; |
| } |
| return err; |
| } |
| |
| static struct notifier_block pci_dn_reconfig_nb = { |
| .notifier_call = pci_dn_reconfig_notifier, |
| }; |
| |
| struct kmem_cache *dtl_cache; |
| |
| #ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE |
| /* |
| * Allocate space for the dispatch trace log for all possible cpus |
| * and register the buffers with the hypervisor. This is used for |
| * computing time stolen by the hypervisor. |
| */ |
| static int alloc_dispatch_logs(void) |
| { |
| if (!firmware_has_feature(FW_FEATURE_SPLPAR)) |
| return 0; |
| |
| if (!dtl_cache) |
| return 0; |
| |
| alloc_dtl_buffers(0); |
| |
| /* Register the DTL for the current (boot) cpu */ |
| register_dtl_buffer(smp_processor_id()); |
| |
| return 0; |
| } |
| #else /* !CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */ |
| static inline int alloc_dispatch_logs(void) |
| { |
| return 0; |
| } |
| #endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */ |
| |
| static int alloc_dispatch_log_kmem_cache(void) |
| { |
| void (*ctor)(void *) = get_dtl_cache_ctor(); |
| |
| dtl_cache = kmem_cache_create("dtl", DISPATCH_LOG_BYTES, |
| DISPATCH_LOG_BYTES, 0, ctor); |
| if (!dtl_cache) { |
| pr_warn("Failed to create dispatch trace log buffer cache\n"); |
| pr_warn("Stolen time statistics will be unreliable\n"); |
| return 0; |
| } |
| |
| return alloc_dispatch_logs(); |
| } |
| machine_early_initcall(pseries, alloc_dispatch_log_kmem_cache); |
| |
| DEFINE_PER_CPU(u64, idle_spurr_cycles); |
| DEFINE_PER_CPU(u64, idle_entry_purr_snap); |
| DEFINE_PER_CPU(u64, idle_entry_spurr_snap); |
| static void pseries_lpar_idle(void) |
| { |
| /* |
| * Default handler to go into low thread priority and possibly |
| * low power mode by ceding processor to hypervisor |
| */ |
| |
| if (!prep_irq_for_idle()) |
| return; |
| |
| /* Indicate to hypervisor that we are idle. */ |
| pseries_idle_prolog(); |
| |
| /* |
| * Yield the processor to the hypervisor. We return if |
| * an external interrupt occurs (which are driven prior |
| * to returning here) or if a prod occurs from another |
| * processor. When returning here, external interrupts |
| * are enabled. |
| */ |
| cede_processor(); |
| |
| pseries_idle_epilog(); |
| } |
| |
| static bool pseries_reloc_on_exception_enabled; |
| |
| bool pseries_reloc_on_exception(void) |
| { |
| return pseries_reloc_on_exception_enabled; |
| } |
| EXPORT_SYMBOL_GPL(pseries_reloc_on_exception); |
| |
| /* |
| * Enable relocation on during exceptions. This has partition wide scope and |
| * may take a while to complete, if it takes longer than one second we will |
| * just give up rather than wasting any more time on this - if that turns out |
| * to ever be a problem in practice we can move this into a kernel thread to |
| * finish off the process later in boot. |
| */ |
| bool pseries_enable_reloc_on_exc(void) |
| { |
| long rc; |
| unsigned int delay, total_delay = 0; |
| |
| while (1) { |
| rc = enable_reloc_on_exceptions(); |
| if (!H_IS_LONG_BUSY(rc)) { |
| if (rc == H_P2) { |
| pr_info("Relocation on exceptions not" |
| " supported\n"); |
| return false; |
| } else if (rc != H_SUCCESS) { |
| pr_warn("Unable to enable relocation" |
| " on exceptions: %ld\n", rc); |
| return false; |
| } |
| pseries_reloc_on_exception_enabled = true; |
| return true; |
| } |
| |
| delay = get_longbusy_msecs(rc); |
| total_delay += delay; |
| if (total_delay > 1000) { |
| pr_warn("Warning: Giving up waiting to enable " |
| "relocation on exceptions (%u msec)!\n", |
| total_delay); |
| return false; |
| } |
| |
| mdelay(delay); |
| } |
| } |
| EXPORT_SYMBOL(pseries_enable_reloc_on_exc); |
| |
| void pseries_disable_reloc_on_exc(void) |
| { |
| long rc; |
| |
| while (1) { |
| rc = disable_reloc_on_exceptions(); |
| if (!H_IS_LONG_BUSY(rc)) |
| break; |
| mdelay(get_longbusy_msecs(rc)); |
| } |
| if (rc == H_SUCCESS) |
| pseries_reloc_on_exception_enabled = false; |
| else |
| pr_warn("Warning: Failed to disable relocation on exceptions: %ld\n", |
| rc); |
| } |
| EXPORT_SYMBOL(pseries_disable_reloc_on_exc); |
| |
| #ifdef __LITTLE_ENDIAN__ |
| void pseries_big_endian_exceptions(void) |
| { |
| long rc; |
| |
| while (1) { |
| rc = enable_big_endian_exceptions(); |
| if (!H_IS_LONG_BUSY(rc)) |
| break; |
| mdelay(get_longbusy_msecs(rc)); |
| } |
| |
| /* |
| * At this point it is unlikely panic() will get anything |
| * out to the user, since this is called very late in kexec |
| * but at least this will stop us from continuing on further |
| * and creating an even more difficult to debug situation. |
| * |
| * There is a known problem when kdump'ing, if cpus are offline |
| * the above call will fail. Rather than panicking again, keep |
| * going and hope the kdump kernel is also little endian, which |
| * it usually is. |
| */ |
| if (rc && !kdump_in_progress()) |
| panic("Could not enable big endian exceptions"); |
| } |
| |
| void __init pseries_little_endian_exceptions(void) |
| { |
| long rc; |
| |
| while (1) { |
| rc = enable_little_endian_exceptions(); |
| if (!H_IS_LONG_BUSY(rc)) |
| break; |
| mdelay(get_longbusy_msecs(rc)); |
| } |
| if (rc) { |
| ppc_md.progress("H_SET_MODE LE exception fail", 0); |
| panic("Could not enable little endian exceptions"); |
| } |
| } |
| #endif |
| |
| static void __init pSeries_discover_phbs(void) |
| { |
| struct device_node *node; |
| struct pci_controller *phb; |
| struct device_node *root = of_find_node_by_path("/"); |
| |
| for_each_child_of_node(root, node) { |
| if (!of_node_is_type(node, "pci") && |
| !of_node_is_type(node, "pciex")) |
| continue; |
| |
| phb = pcibios_alloc_controller(node); |
| if (!phb) |
| continue; |
| rtas_setup_phb(phb); |
| pci_process_bridge_OF_ranges(phb, node, 0); |
| isa_bridge_find_early(phb); |
| phb->controller_ops = pseries_pci_controller_ops; |
| |
| /* create pci_dn's for DT nodes under this PHB */ |
| pci_devs_phb_init_dynamic(phb); |
| |
| pseries_msi_allocate_domains(phb); |
| } |
| |
| of_node_put(root); |
| |
| /* |
| * PCI_PROBE_ONLY and PCI_REASSIGN_ALL_BUS can be set via properties |
| * in chosen. |
| */ |
| of_pci_check_probe_only(); |
| } |
| |
| static void init_cpu_char_feature_flags(struct h_cpu_char_result *result) |
| { |
| /* |
| * The features below are disabled by default, so we instead look to see |
| * if firmware has *enabled* them, and set them if so. |
| */ |
| if (result->character & H_CPU_CHAR_SPEC_BAR_ORI31) |
| security_ftr_set(SEC_FTR_SPEC_BAR_ORI31); |
| |
| if (result->character & H_CPU_CHAR_BCCTRL_SERIALISED) |
| security_ftr_set(SEC_FTR_BCCTRL_SERIALISED); |
| |
| if (result->character & H_CPU_CHAR_L1D_FLUSH_ORI30) |
| security_ftr_set(SEC_FTR_L1D_FLUSH_ORI30); |
| |
| if (result->character & H_CPU_CHAR_L1D_FLUSH_TRIG2) |
| security_ftr_set(SEC_FTR_L1D_FLUSH_TRIG2); |
| |
| if (result->character & H_CPU_CHAR_L1D_THREAD_PRIV) |
| security_ftr_set(SEC_FTR_L1D_THREAD_PRIV); |
| |
| if (result->character & H_CPU_CHAR_COUNT_CACHE_DISABLED) |
| security_ftr_set(SEC_FTR_COUNT_CACHE_DISABLED); |
| |
| if (result->character & H_CPU_CHAR_BCCTR_FLUSH_ASSIST) |
| security_ftr_set(SEC_FTR_BCCTR_FLUSH_ASSIST); |
| |
| if (result->character & H_CPU_CHAR_BCCTR_LINK_FLUSH_ASSIST) |
| security_ftr_set(SEC_FTR_BCCTR_LINK_FLUSH_ASSIST); |
| |
| if (result->behaviour & H_CPU_BEHAV_FLUSH_COUNT_CACHE) |
| security_ftr_set(SEC_FTR_FLUSH_COUNT_CACHE); |
| |
| if (result->behaviour & H_CPU_BEHAV_FLUSH_LINK_STACK) |
| security_ftr_set(SEC_FTR_FLUSH_LINK_STACK); |
| |
| /* |
| * The features below are enabled by default, so we instead look to see |
| * if firmware has *disabled* them, and clear them if so. |
| * H_CPU_BEHAV_FAVOUR_SECURITY_H could be set only if |
| * H_CPU_BEHAV_FAVOUR_SECURITY is. |
| */ |
| if (!(result->behaviour & H_CPU_BEHAV_FAVOUR_SECURITY)) { |
| security_ftr_clear(SEC_FTR_FAVOUR_SECURITY); |
| pseries_security_flavor = 0; |
| } else if (result->behaviour & H_CPU_BEHAV_FAVOUR_SECURITY_H) |
| pseries_security_flavor = 1; |
| else |
| pseries_security_flavor = 2; |
| |
| if (!(result->behaviour & H_CPU_BEHAV_L1D_FLUSH_PR)) |
| security_ftr_clear(SEC_FTR_L1D_FLUSH_PR); |
| |
| if (result->behaviour & H_CPU_BEHAV_NO_L1D_FLUSH_ENTRY) |
| security_ftr_clear(SEC_FTR_L1D_FLUSH_ENTRY); |
| |
| if (result->behaviour & H_CPU_BEHAV_NO_L1D_FLUSH_UACCESS) |
| security_ftr_clear(SEC_FTR_L1D_FLUSH_UACCESS); |
| |
| if (result->behaviour & H_CPU_BEHAV_NO_STF_BARRIER) |
| security_ftr_clear(SEC_FTR_STF_BARRIER); |
| |
| if (!(result->behaviour & H_CPU_BEHAV_BNDS_CHK_SPEC_BAR)) |
| security_ftr_clear(SEC_FTR_BNDS_CHK_SPEC_BAR); |
| } |
| |
| void pseries_setup_security_mitigations(void) |
| { |
| struct h_cpu_char_result result; |
| enum l1d_flush_type types; |
| bool enable; |
| long rc; |
| |
| /* |
| * Set features to the defaults assumed by init_cpu_char_feature_flags() |
| * so it can set/clear again any features that might have changed after |
| * migration, and in case the hypercall fails and it is not even called. |
| */ |
| powerpc_security_features = SEC_FTR_DEFAULT; |
| |
| rc = plpar_get_cpu_characteristics(&result); |
| if (rc == H_SUCCESS) |
| init_cpu_char_feature_flags(&result); |
| |
| /* |
| * We're the guest so this doesn't apply to us, clear it to simplify |
| * handling of it elsewhere. |
| */ |
| security_ftr_clear(SEC_FTR_L1D_FLUSH_HV); |
| |
| types = L1D_FLUSH_FALLBACK; |
| |
| if (security_ftr_enabled(SEC_FTR_L1D_FLUSH_TRIG2)) |
| types |= L1D_FLUSH_MTTRIG; |
| |
| if (security_ftr_enabled(SEC_FTR_L1D_FLUSH_ORI30)) |
| types |= L1D_FLUSH_ORI; |
| |
| enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && \ |
| security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR); |
| |
| setup_rfi_flush(types, enable); |
| setup_count_cache_flush(); |
| |
| enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && |
| security_ftr_enabled(SEC_FTR_L1D_FLUSH_ENTRY); |
| setup_entry_flush(enable); |
| |
| enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && |
| security_ftr_enabled(SEC_FTR_L1D_FLUSH_UACCESS); |
| setup_uaccess_flush(enable); |
| |
| setup_stf_barrier(); |
| } |
| |
| #ifdef CONFIG_PCI_IOV |
| enum rtas_iov_fw_value_map { |
| NUM_RES_PROPERTY = 0, /* Number of Resources */ |
| LOW_INT = 1, /* Lowest 32 bits of Address */ |
| START_OF_ENTRIES = 2, /* Always start of entry */ |
| APERTURE_PROPERTY = 2, /* Start of entry+ to Aperture Size */ |
| WDW_SIZE_PROPERTY = 4, /* Start of entry+ to Window Size */ |
| NEXT_ENTRY = 7 /* Go to next entry on array */ |
| }; |
| |
| enum get_iov_fw_value_index { |
| BAR_ADDRS = 1, /* Get Bar Address */ |
| APERTURE_SIZE = 2, /* Get Aperture Size */ |
| WDW_SIZE = 3 /* Get Window Size */ |
| }; |
| |
| static resource_size_t pseries_get_iov_fw_value(struct pci_dev *dev, int resno, |
| enum get_iov_fw_value_index value) |
| { |
| const int *indexes; |
| struct device_node *dn = pci_device_to_OF_node(dev); |
| int i, num_res, ret = 0; |
| |
| indexes = of_get_property(dn, "ibm,open-sriov-vf-bar-info", NULL); |
| if (!indexes) |
| return 0; |
| |
| /* |
| * First element in the array is the number of Bars |
| * returned. Search through the list to find the matching |
| * bar |
| */ |
| num_res = of_read_number(&indexes[NUM_RES_PROPERTY], 1); |
| if (resno >= num_res) |
| return 0; /* or an error */ |
| |
| i = START_OF_ENTRIES + NEXT_ENTRY * resno; |
| switch (value) { |
| case BAR_ADDRS: |
| ret = of_read_number(&indexes[i], 2); |
| break; |
| case APERTURE_SIZE: |
| ret = of_read_number(&indexes[i + APERTURE_PROPERTY], 2); |
| break; |
| case WDW_SIZE: |
| ret = of_read_number(&indexes[i + WDW_SIZE_PROPERTY], 2); |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static void of_pci_set_vf_bar_size(struct pci_dev *dev, const int *indexes) |
| { |
| struct resource *res; |
| resource_size_t base, size; |
| int i, r, num_res; |
| |
| num_res = of_read_number(&indexes[NUM_RES_PROPERTY], 1); |
| num_res = min_t(int, num_res, PCI_SRIOV_NUM_BARS); |
| for (i = START_OF_ENTRIES, r = 0; r < num_res && r < PCI_SRIOV_NUM_BARS; |
| i += NEXT_ENTRY, r++) { |
| res = &dev->resource[r + PCI_IOV_RESOURCES]; |
| base = of_read_number(&indexes[i], 2); |
| size = of_read_number(&indexes[i + APERTURE_PROPERTY], 2); |
| res->flags = pci_parse_of_flags(of_read_number |
| (&indexes[i + LOW_INT], 1), 0); |
| res->flags |= (IORESOURCE_MEM_64 | IORESOURCE_PCI_FIXED); |
| res->name = pci_name(dev); |
| res->start = base; |
| res->end = base + size - 1; |
| } |
| } |
| |
| static void of_pci_parse_iov_addrs(struct pci_dev *dev, const int *indexes) |
| { |
| struct resource *res, *root, *conflict; |
| resource_size_t base, size; |
| int i, r, num_res; |
| |
| /* |
| * First element in the array is the number of Bars |
| * returned. Search through the list to find the matching |
| * bars assign them from firmware into resources structure. |
| */ |
| num_res = of_read_number(&indexes[NUM_RES_PROPERTY], 1); |
| for (i = START_OF_ENTRIES, r = 0; r < num_res && r < PCI_SRIOV_NUM_BARS; |
| i += NEXT_ENTRY, r++) { |
| res = &dev->resource[r + PCI_IOV_RESOURCES]; |
| base = of_read_number(&indexes[i], 2); |
| size = of_read_number(&indexes[i + WDW_SIZE_PROPERTY], 2); |
| res->name = pci_name(dev); |
| res->start = base; |
| res->end = base + size - 1; |
| root = &iomem_resource; |
| dev_dbg(&dev->dev, |
| "pSeries IOV BAR %d: trying firmware assignment %pR\n", |
| r + PCI_IOV_RESOURCES, res); |
| conflict = request_resource_conflict(root, res); |
| if (conflict) { |
| dev_info(&dev->dev, |
| "BAR %d: %pR conflicts with %s %pR\n", |
| r + PCI_IOV_RESOURCES, res, |
| conflict->name, conflict); |
| res->flags |= IORESOURCE_UNSET; |
| } |
| } |
| } |
| |
| static void pseries_disable_sriov_resources(struct pci_dev *pdev) |
| { |
| int i; |
| |
| pci_warn(pdev, "No hypervisor support for SR-IOV on this device, IOV BARs disabled.\n"); |
| for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) |
| pdev->resource[i + PCI_IOV_RESOURCES].flags = 0; |
| } |
| |
| static void pseries_pci_fixup_resources(struct pci_dev *pdev) |
| { |
| const int *indexes; |
| struct device_node *dn = pci_device_to_OF_node(pdev); |
| |
| /*Firmware must support open sriov otherwise dont configure*/ |
| indexes = of_get_property(dn, "ibm,open-sriov-vf-bar-info", NULL); |
| if (indexes) |
| of_pci_set_vf_bar_size(pdev, indexes); |
| else |
| pseries_disable_sriov_resources(pdev); |
| } |
| |
| static void pseries_pci_fixup_iov_resources(struct pci_dev *pdev) |
| { |
| const int *indexes; |
| struct device_node *dn = pci_device_to_OF_node(pdev); |
| |
| if (!pdev->is_physfn) |
| return; |
| /*Firmware must support open sriov otherwise don't configure*/ |
| indexes = of_get_property(dn, "ibm,open-sriov-vf-bar-info", NULL); |
| if (indexes) |
| of_pci_parse_iov_addrs(pdev, indexes); |
| else |
| pseries_disable_sriov_resources(pdev); |
| } |
| |
| static resource_size_t pseries_pci_iov_resource_alignment(struct pci_dev *pdev, |
| int resno) |
| { |
| const __be32 *reg; |
| struct device_node *dn = pci_device_to_OF_node(pdev); |
| |
| /*Firmware must support open sriov otherwise report regular alignment*/ |
| reg = of_get_property(dn, "ibm,is-open-sriov-pf", NULL); |
| if (!reg) |
| return pci_iov_resource_size(pdev, resno); |
| |
| if (!pdev->is_physfn) |
| return 0; |
| return pseries_get_iov_fw_value(pdev, |
| resno - PCI_IOV_RESOURCES, |
| APERTURE_SIZE); |
| } |
| #endif |
| |
| static void __init pSeries_setup_arch(void) |
| { |
| set_arch_panic_timeout(10, ARCH_PANIC_TIMEOUT); |
| |
| /* Discover PIC type and setup ppc_md accordingly */ |
| smp_init_pseries(); |
| |
| |
| if (radix_enabled() && !mmu_has_feature(MMU_FTR_GTSE)) |
| if (!firmware_has_feature(FW_FEATURE_RPT_INVALIDATE)) |
| panic("BUG: Radix support requires either GTSE or RPT_INVALIDATE\n"); |
| |
| |
| /* openpic global configuration register (64-bit format). */ |
| /* openpic Interrupt Source Unit pointer (64-bit format). */ |
| /* python0 facility area (mmio) (64-bit format) REAL address. */ |
| |
| /* init to some ~sane value until calibrate_delay() runs */ |
| loops_per_jiffy = 50000000; |
| |
| fwnmi_init(); |
| |
| pseries_setup_security_mitigations(); |
| if (!radix_enabled()) |
| pseries_lpar_read_hblkrm_characteristics(); |
| |
| /* By default, only probe PCI (can be overridden by rtas_pci) */ |
| pci_add_flags(PCI_PROBE_ONLY); |
| |
| /* Find and initialize PCI host bridges */ |
| init_pci_config_tokens(); |
| of_reconfig_notifier_register(&pci_dn_reconfig_nb); |
| |
| pSeries_nvram_init(); |
| |
| if (firmware_has_feature(FW_FEATURE_LPAR)) { |
| vpa_init(boot_cpuid); |
| |
| if (lppaca_shared_proc(get_lppaca())) { |
| static_branch_enable(&shared_processor); |
| pv_spinlocks_init(); |
| #ifdef CONFIG_PARAVIRT_TIME_ACCOUNTING |
| static_key_slow_inc(¶virt_steal_enabled); |
| if (steal_acc) |
| static_key_slow_inc(¶virt_steal_rq_enabled); |
| #endif |
| } |
| |
| ppc_md.power_save = pseries_lpar_idle; |
| ppc_md.enable_pmcs = pseries_lpar_enable_pmcs; |
| #ifdef CONFIG_PCI_IOV |
| ppc_md.pcibios_fixup_resources = |
| pseries_pci_fixup_resources; |
| ppc_md.pcibios_fixup_sriov = |
| pseries_pci_fixup_iov_resources; |
| ppc_md.pcibios_iov_resource_alignment = |
| pseries_pci_iov_resource_alignment; |
| #endif |
| } else { |
| /* No special idle routine */ |
| ppc_md.enable_pmcs = power4_enable_pmcs; |
| } |
| |
| ppc_md.pcibios_root_bridge_prepare = pseries_root_bridge_prepare; |
| pseries_rng_init(); |
| } |
| |
| static void pseries_panic(char *str) |
| { |
| panic_flush_kmsg_end(); |
| rtas_os_term(str); |
| } |
| |
| static int __init pSeries_init_panel(void) |
| { |
| /* Manually leave the kernel version on the panel. */ |
| #ifdef __BIG_ENDIAN__ |
| ppc_md.progress("Linux ppc64\n", 0); |
| #else |
| ppc_md.progress("Linux ppc64le\n", 0); |
| #endif |
| ppc_md.progress(init_utsname()->version, 0); |
| |
| return 0; |
| } |
| machine_arch_initcall(pseries, pSeries_init_panel); |
| |
| static int pseries_set_dabr(unsigned long dabr, unsigned long dabrx) |
| { |
| return plpar_hcall_norets(H_SET_DABR, dabr); |
| } |
| |
| static int pseries_set_xdabr(unsigned long dabr, unsigned long dabrx) |
| { |
| /* Have to set at least one bit in the DABRX according to PAPR */ |
| if (dabrx == 0 && dabr == 0) |
| dabrx = DABRX_USER; |
| /* PAPR says we can only set kernel and user bits */ |
| dabrx &= DABRX_KERNEL | DABRX_USER; |
| |
| return plpar_hcall_norets(H_SET_XDABR, dabr, dabrx); |
| } |
| |
| static int pseries_set_dawr(int nr, unsigned long dawr, unsigned long dawrx) |
| { |
| /* PAPR says we can't set HYP */ |
| dawrx &= ~DAWRX_HYP; |
| |
| if (nr == 0) |
| return plpar_set_watchpoint0(dawr, dawrx); |
| else |
| return plpar_set_watchpoint1(dawr, dawrx); |
| } |
| |
| #define CMO_CHARACTERISTICS_TOKEN 44 |
| #define CMO_MAXLENGTH 1026 |
| |
| void pSeries_coalesce_init(void) |
| { |
| struct hvcall_mpp_x_data mpp_x_data; |
| |
| if (firmware_has_feature(FW_FEATURE_CMO) && !h_get_mpp_x(&mpp_x_data)) |
| powerpc_firmware_features |= FW_FEATURE_XCMO; |
| else |
| powerpc_firmware_features &= ~FW_FEATURE_XCMO; |
| } |
| |
| /** |
| * fw_cmo_feature_init - FW_FEATURE_CMO is not stored in ibm,hypertas-functions, |
| * handle that here. (Stolen from parse_system_parameter_string) |
| */ |
| static void __init pSeries_cmo_feature_init(void) |
| { |
| static struct papr_sysparm_buf buf __initdata; |
| static_assert(sizeof(buf.val) >= CMO_MAXLENGTH); |
| char *ptr, *key, *value, *end; |
| int page_order = IOMMU_PAGE_SHIFT_4K; |
| |
| pr_debug(" -> fw_cmo_feature_init()\n"); |
| |
| if (papr_sysparm_get(PAPR_SYSPARM_COOP_MEM_OVERCOMMIT_ATTRS, &buf)) { |
| pr_debug("CMO not available\n"); |
| pr_debug(" <- fw_cmo_feature_init()\n"); |
| return; |
| } |
| |
| end = &buf.val[CMO_MAXLENGTH]; |
| ptr = &buf.val[0]; |
| key = value = ptr; |
| |
| while (*ptr && (ptr <= end)) { |
| /* Separate the key and value by replacing '=' with '\0' and |
| * point the value at the string after the '=' |
| */ |
| if (ptr[0] == '=') { |
| ptr[0] = '\0'; |
| value = ptr + 1; |
| } else if (ptr[0] == '\0' || ptr[0] == ',') { |
| /* Terminate the string containing the key/value pair */ |
| ptr[0] = '\0'; |
| |
| if (key == value) { |
| pr_debug("Malformed key/value pair\n"); |
| /* Never found a '=', end processing */ |
| break; |
| } |
| |
| if (0 == strcmp(key, "CMOPageSize")) |
| page_order = simple_strtol(value, NULL, 10); |
| else if (0 == strcmp(key, "PrPSP")) |
| CMO_PrPSP = simple_strtol(value, NULL, 10); |
| else if (0 == strcmp(key, "SecPSP")) |
| CMO_SecPSP = simple_strtol(value, NULL, 10); |
| value = key = ptr + 1; |
| } |
| ptr++; |
| } |
| |
| /* Page size is returned as the power of 2 of the page size, |
| * convert to the page size in bytes before returning |
| */ |
| CMO_PageSize = 1 << page_order; |
| pr_debug("CMO_PageSize = %lu\n", CMO_PageSize); |
| |
| if (CMO_PrPSP != -1 || CMO_SecPSP != -1) { |
| pr_info("CMO enabled\n"); |
| pr_debug("CMO enabled, PrPSP=%d, SecPSP=%d\n", CMO_PrPSP, |
| CMO_SecPSP); |
| powerpc_firmware_features |= FW_FEATURE_CMO; |
| pSeries_coalesce_init(); |
| } else |
| pr_debug("CMO not enabled, PrPSP=%d, SecPSP=%d\n", CMO_PrPSP, |
| CMO_SecPSP); |
| pr_debug(" <- fw_cmo_feature_init()\n"); |
| } |
| |
| static void __init pseries_add_hw_description(void) |
| { |
| struct device_node *dn; |
| const char *s; |
| |
| dn = of_find_node_by_path("/openprom"); |
| if (dn) { |
| if (of_property_read_string(dn, "model", &s) == 0) |
| seq_buf_printf(&ppc_hw_desc, "of:%s ", s); |
| |
| of_node_put(dn); |
| } |
| |
| dn = of_find_node_by_path("/hypervisor"); |
| if (dn) { |
| if (of_property_read_string(dn, "compatible", &s) == 0) |
| seq_buf_printf(&ppc_hw_desc, "hv:%s ", s); |
| |
| of_node_put(dn); |
| return; |
| } |
| |
| if (of_property_read_bool(of_root, "ibm,powervm-partition") || |
| of_property_read_bool(of_root, "ibm,fw-net-version")) |
| seq_buf_printf(&ppc_hw_desc, "hv:phyp "); |
| } |
| |
| /* |
| * Early initialization. Relocation is on but do not reference unbolted pages |
| */ |
| static void __init pseries_init(void) |
| { |
| pr_debug(" -> pseries_init()\n"); |
| |
| pseries_add_hw_description(); |
| |
| #ifdef CONFIG_HVC_CONSOLE |
| if (firmware_has_feature(FW_FEATURE_LPAR)) |
| hvc_vio_init_early(); |
| #endif |
| if (firmware_has_feature(FW_FEATURE_XDABR)) |
| ppc_md.set_dabr = pseries_set_xdabr; |
| else if (firmware_has_feature(FW_FEATURE_DABR)) |
| ppc_md.set_dabr = pseries_set_dabr; |
| |
| if (firmware_has_feature(FW_FEATURE_SET_MODE)) |
| ppc_md.set_dawr = pseries_set_dawr; |
| |
| pSeries_cmo_feature_init(); |
| iommu_init_early_pSeries(); |
| |
| pr_debug(" <- pseries_init()\n"); |
| } |
| |
| /** |
| * pseries_power_off - tell firmware about how to power off the system. |
| * |
| * This function calls either the power-off rtas token in normal cases |
| * or the ibm,power-off-ups token (if present & requested) in case of |
| * a power failure. If power-off token is used, power on will only be |
| * possible with power button press. If ibm,power-off-ups token is used |
| * it will allow auto poweron after power is restored. |
| */ |
| static void pseries_power_off(void) |
| { |
| int rc; |
| int rtas_poweroff_ups_token = rtas_function_token(RTAS_FN_IBM_POWER_OFF_UPS); |
| |
| if (rtas_flash_term_hook) |
| rtas_flash_term_hook(SYS_POWER_OFF); |
| |
| if (rtas_poweron_auto == 0 || |
| rtas_poweroff_ups_token == RTAS_UNKNOWN_SERVICE) { |
| rc = rtas_call(rtas_function_token(RTAS_FN_POWER_OFF), 2, 1, NULL, -1, -1); |
| printk(KERN_INFO "RTAS power-off returned %d\n", rc); |
| } else { |
| rc = rtas_call(rtas_poweroff_ups_token, 0, 1, NULL); |
| printk(KERN_INFO "RTAS ibm,power-off-ups returned %d\n", rc); |
| } |
| for (;;); |
| } |
| |
| static int __init pSeries_probe(void) |
| { |
| if (!of_node_is_type(of_root, "chrp")) |
| return 0; |
| |
| /* Cell blades firmware claims to be chrp while it's not. Until this |
| * is fixed, we need to avoid those here. |
| */ |
| if (of_machine_is_compatible("IBM,CPBW-1.0") || |
| of_machine_is_compatible("IBM,CBEA")) |
| return 0; |
| |
| pm_power_off = pseries_power_off; |
| |
| pr_debug("Machine is%s LPAR !\n", |
| (powerpc_firmware_features & FW_FEATURE_LPAR) ? "" : " not"); |
| |
| pseries_init(); |
| |
| return 1; |
| } |
| |
| static int pSeries_pci_probe_mode(struct pci_bus *bus) |
| { |
| if (firmware_has_feature(FW_FEATURE_LPAR)) |
| return PCI_PROBE_DEVTREE; |
| return PCI_PROBE_NORMAL; |
| } |
| |
| struct pci_controller_ops pseries_pci_controller_ops = { |
| .probe_mode = pSeries_pci_probe_mode, |
| #ifdef CONFIG_SPAPR_TCE_IOMMU |
| .device_group = pSeries_pci_device_group, |
| #endif |
| }; |
| |
| define_machine(pseries) { |
| .name = "pSeries", |
| .probe = pSeries_probe, |
| .setup_arch = pSeries_setup_arch, |
| .init_IRQ = pseries_init_irq, |
| .show_cpuinfo = pSeries_show_cpuinfo, |
| .log_error = pSeries_log_error, |
| .discover_phbs = pSeries_discover_phbs, |
| .pcibios_fixup = pSeries_final_fixup, |
| .restart = rtas_restart, |
| .halt = rtas_halt, |
| .panic = pseries_panic, |
| .get_boot_time = rtas_get_boot_time, |
| .get_rtc_time = rtas_get_rtc_time, |
| .set_rtc_time = rtas_set_rtc_time, |
| .progress = rtas_progress, |
| .system_reset_exception = pSeries_system_reset_exception, |
| .machine_check_early = pseries_machine_check_realmode, |
| .machine_check_exception = pSeries_machine_check_exception, |
| .machine_check_log_err = pSeries_machine_check_log_err, |
| #ifdef CONFIG_KEXEC_CORE |
| .machine_kexec = pseries_machine_kexec, |
| .kexec_cpu_down = pseries_kexec_cpu_down, |
| #endif |
| #ifdef CONFIG_MEMORY_HOTPLUG |
| .memory_block_size = pseries_memory_block_size, |
| #endif |
| }; |