| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * intel_pstate.c: Native P state management for Intel processors |
| * |
| * (C) Copyright 2012 Intel Corporation |
| * Author: Dirk Brandewie <dirk.j.brandewie@intel.com> |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/kernel.h> |
| #include <linux/kernel_stat.h> |
| #include <linux/module.h> |
| #include <linux/ktime.h> |
| #include <linux/hrtimer.h> |
| #include <linux/tick.h> |
| #include <linux/slab.h> |
| #include <linux/sched/cpufreq.h> |
| #include <linux/list.h> |
| #include <linux/cpu.h> |
| #include <linux/cpufreq.h> |
| #include <linux/sysfs.h> |
| #include <linux/types.h> |
| #include <linux/fs.h> |
| #include <linux/acpi.h> |
| #include <linux/vmalloc.h> |
| #include <trace/events/power.h> |
| |
| #include <asm/div64.h> |
| #include <asm/msr.h> |
| #include <asm/cpu_device_id.h> |
| #include <asm/cpufeature.h> |
| #include <asm/intel-family.h> |
| |
| #define INTEL_PSTATE_SAMPLING_INTERVAL (10 * NSEC_PER_MSEC) |
| |
| #define INTEL_CPUFREQ_TRANSITION_LATENCY 20000 |
| #define INTEL_CPUFREQ_TRANSITION_DELAY 500 |
| |
| #ifdef CONFIG_ACPI |
| #include <acpi/processor.h> |
| #include <acpi/cppc_acpi.h> |
| #endif |
| |
| #define FRAC_BITS 8 |
| #define int_tofp(X) ((int64_t)(X) << FRAC_BITS) |
| #define fp_toint(X) ((X) >> FRAC_BITS) |
| |
| #define ONE_EIGHTH_FP ((int64_t)1 << (FRAC_BITS - 3)) |
| |
| #define EXT_BITS 6 |
| #define EXT_FRAC_BITS (EXT_BITS + FRAC_BITS) |
| #define fp_ext_toint(X) ((X) >> EXT_FRAC_BITS) |
| #define int_ext_tofp(X) ((int64_t)(X) << EXT_FRAC_BITS) |
| |
| static inline int32_t mul_fp(int32_t x, int32_t y) |
| { |
| return ((int64_t)x * (int64_t)y) >> FRAC_BITS; |
| } |
| |
| static inline int32_t div_fp(s64 x, s64 y) |
| { |
| return div64_s64((int64_t)x << FRAC_BITS, y); |
| } |
| |
| static inline int ceiling_fp(int32_t x) |
| { |
| int mask, ret; |
| |
| ret = fp_toint(x); |
| mask = (1 << FRAC_BITS) - 1; |
| if (x & mask) |
| ret += 1; |
| return ret; |
| } |
| |
| static inline int32_t percent_fp(int percent) |
| { |
| return div_fp(percent, 100); |
| } |
| |
| static inline u64 mul_ext_fp(u64 x, u64 y) |
| { |
| return (x * y) >> EXT_FRAC_BITS; |
| } |
| |
| static inline u64 div_ext_fp(u64 x, u64 y) |
| { |
| return div64_u64(x << EXT_FRAC_BITS, y); |
| } |
| |
| static inline int32_t percent_ext_fp(int percent) |
| { |
| return div_ext_fp(percent, 100); |
| } |
| |
| /** |
| * struct sample - Store performance sample |
| * @core_avg_perf: Ratio of APERF/MPERF which is the actual average |
| * performance during last sample period |
| * @busy_scaled: Scaled busy value which is used to calculate next |
| * P state. This can be different than core_avg_perf |
| * to account for cpu idle period |
| * @aperf: Difference of actual performance frequency clock count |
| * read from APERF MSR between last and current sample |
| * @mperf: Difference of maximum performance frequency clock count |
| * read from MPERF MSR between last and current sample |
| * @tsc: Difference of time stamp counter between last and |
| * current sample |
| * @time: Current time from scheduler |
| * |
| * This structure is used in the cpudata structure to store performance sample |
| * data for choosing next P State. |
| */ |
| struct sample { |
| int32_t core_avg_perf; |
| int32_t busy_scaled; |
| u64 aperf; |
| u64 mperf; |
| u64 tsc; |
| u64 time; |
| }; |
| |
| /** |
| * struct pstate_data - Store P state data |
| * @current_pstate: Current requested P state |
| * @min_pstate: Min P state possible for this platform |
| * @max_pstate: Max P state possible for this platform |
| * @max_pstate_physical:This is physical Max P state for a processor |
| * This can be higher than the max_pstate which can |
| * be limited by platform thermal design power limits |
| * @scaling: Scaling factor to convert frequency to cpufreq |
| * frequency units |
| * @turbo_pstate: Max Turbo P state possible for this platform |
| * @max_freq: @max_pstate frequency in cpufreq units |
| * @turbo_freq: @turbo_pstate frequency in cpufreq units |
| * |
| * Stores the per cpu model P state limits and current P state. |
| */ |
| struct pstate_data { |
| int current_pstate; |
| int min_pstate; |
| int max_pstate; |
| int max_pstate_physical; |
| int scaling; |
| int turbo_pstate; |
| unsigned int max_freq; |
| unsigned int turbo_freq; |
| }; |
| |
| /** |
| * struct vid_data - Stores voltage information data |
| * @min: VID data for this platform corresponding to |
| * the lowest P state |
| * @max: VID data corresponding to the highest P State. |
| * @turbo: VID data for turbo P state |
| * @ratio: Ratio of (vid max - vid min) / |
| * (max P state - Min P State) |
| * |
| * Stores the voltage data for DVFS (Dynamic Voltage and Frequency Scaling) |
| * This data is used in Atom platforms, where in addition to target P state, |
| * the voltage data needs to be specified to select next P State. |
| */ |
| struct vid_data { |
| int min; |
| int max; |
| int turbo; |
| int32_t ratio; |
| }; |
| |
| /** |
| * struct global_params - Global parameters, mostly tunable via sysfs. |
| * @no_turbo: Whether or not to use turbo P-states. |
| * @turbo_disabled: Whethet or not turbo P-states are available at all, |
| * based on the MSR_IA32_MISC_ENABLE value and whether or |
| * not the maximum reported turbo P-state is different from |
| * the maximum reported non-turbo one. |
| * @turbo_disabled_mf: The @turbo_disabled value reflected by cpuinfo.max_freq. |
| * @min_perf_pct: Minimum capacity limit in percent of the maximum turbo |
| * P-state capacity. |
| * @max_perf_pct: Maximum capacity limit in percent of the maximum turbo |
| * P-state capacity. |
| */ |
| struct global_params { |
| bool no_turbo; |
| bool turbo_disabled; |
| bool turbo_disabled_mf; |
| int max_perf_pct; |
| int min_perf_pct; |
| }; |
| |
| /** |
| * struct cpudata - Per CPU instance data storage |
| * @cpu: CPU number for this instance data |
| * @policy: CPUFreq policy value |
| * @update_util: CPUFreq utility callback information |
| * @update_util_set: CPUFreq utility callback is set |
| * @iowait_boost: iowait-related boost fraction |
| * @last_update: Time of the last update. |
| * @pstate: Stores P state limits for this CPU |
| * @vid: Stores VID limits for this CPU |
| * @last_sample_time: Last Sample time |
| * @aperf_mperf_shift: Number of clock cycles after aperf, merf is incremented |
| * This shift is a multiplier to mperf delta to |
| * calculate CPU busy. |
| * @prev_aperf: Last APERF value read from APERF MSR |
| * @prev_mperf: Last MPERF value read from MPERF MSR |
| * @prev_tsc: Last timestamp counter (TSC) value |
| * @prev_cummulative_iowait: IO Wait time difference from last and |
| * current sample |
| * @sample: Storage for storing last Sample data |
| * @min_perf_ratio: Minimum capacity in terms of PERF or HWP ratios |
| * @max_perf_ratio: Maximum capacity in terms of PERF or HWP ratios |
| * @acpi_perf_data: Stores ACPI perf information read from _PSS |
| * @valid_pss_table: Set to true for valid ACPI _PSS entries found |
| * @epp_powersave: Last saved HWP energy performance preference |
| * (EPP) or energy performance bias (EPB), |
| * when policy switched to performance |
| * @epp_policy: Last saved policy used to set EPP/EPB |
| * @epp_default: Power on default HWP energy performance |
| * preference/bias |
| * @epp_saved: Saved EPP/EPB during system suspend or CPU offline |
| * operation |
| * @hwp_req_cached: Cached value of the last HWP Request MSR |
| * @hwp_cap_cached: Cached value of the last HWP Capabilities MSR |
| * @last_io_update: Last time when IO wake flag was set |
| * @sched_flags: Store scheduler flags for possible cross CPU update |
| * @hwp_boost_min: Last HWP boosted min performance |
| * |
| * This structure stores per CPU instance data for all CPUs. |
| */ |
| struct cpudata { |
| int cpu; |
| |
| unsigned int policy; |
| struct update_util_data update_util; |
| bool update_util_set; |
| |
| struct pstate_data pstate; |
| struct vid_data vid; |
| |
| u64 last_update; |
| u64 last_sample_time; |
| u64 aperf_mperf_shift; |
| u64 prev_aperf; |
| u64 prev_mperf; |
| u64 prev_tsc; |
| u64 prev_cummulative_iowait; |
| struct sample sample; |
| int32_t min_perf_ratio; |
| int32_t max_perf_ratio; |
| #ifdef CONFIG_ACPI |
| struct acpi_processor_performance acpi_perf_data; |
| bool valid_pss_table; |
| #endif |
| unsigned int iowait_boost; |
| s16 epp_powersave; |
| s16 epp_policy; |
| s16 epp_default; |
| s16 epp_saved; |
| u64 hwp_req_cached; |
| u64 hwp_cap_cached; |
| u64 last_io_update; |
| unsigned int sched_flags; |
| u32 hwp_boost_min; |
| }; |
| |
| static struct cpudata **all_cpu_data; |
| |
| /** |
| * struct pstate_funcs - Per CPU model specific callbacks |
| * @get_max: Callback to get maximum non turbo effective P state |
| * @get_max_physical: Callback to get maximum non turbo physical P state |
| * @get_min: Callback to get minimum P state |
| * @get_turbo: Callback to get turbo P state |
| * @get_scaling: Callback to get frequency scaling factor |
| * @get_val: Callback to convert P state to actual MSR write value |
| * @get_vid: Callback to get VID data for Atom platforms |
| * |
| * Core and Atom CPU models have different way to get P State limits. This |
| * structure is used to store those callbacks. |
| */ |
| struct pstate_funcs { |
| int (*get_max)(void); |
| int (*get_max_physical)(void); |
| int (*get_min)(void); |
| int (*get_turbo)(void); |
| int (*get_scaling)(void); |
| int (*get_aperf_mperf_shift)(void); |
| u64 (*get_val)(struct cpudata*, int pstate); |
| void (*get_vid)(struct cpudata *); |
| }; |
| |
| static struct pstate_funcs pstate_funcs __read_mostly; |
| |
| static int hwp_active __read_mostly; |
| static int hwp_mode_bdw __read_mostly; |
| static bool per_cpu_limits __read_mostly; |
| static bool hwp_boost __read_mostly; |
| |
| static struct cpufreq_driver *intel_pstate_driver __read_mostly; |
| |
| #ifdef CONFIG_ACPI |
| static bool acpi_ppc; |
| #endif |
| |
| static struct global_params global; |
| |
| static DEFINE_MUTEX(intel_pstate_driver_lock); |
| static DEFINE_MUTEX(intel_pstate_limits_lock); |
| |
| #ifdef CONFIG_ACPI |
| |
| static bool intel_pstate_acpi_pm_profile_server(void) |
| { |
| if (acpi_gbl_FADT.preferred_profile == PM_ENTERPRISE_SERVER || |
| acpi_gbl_FADT.preferred_profile == PM_PERFORMANCE_SERVER) |
| return true; |
| |
| return false; |
| } |
| |
| static bool intel_pstate_get_ppc_enable_status(void) |
| { |
| if (intel_pstate_acpi_pm_profile_server()) |
| return true; |
| |
| return acpi_ppc; |
| } |
| |
| #ifdef CONFIG_ACPI_CPPC_LIB |
| |
| /* The work item is needed to avoid CPU hotplug locking issues */ |
| static void intel_pstste_sched_itmt_work_fn(struct work_struct *work) |
| { |
| sched_set_itmt_support(); |
| } |
| |
| static DECLARE_WORK(sched_itmt_work, intel_pstste_sched_itmt_work_fn); |
| |
| static void intel_pstate_set_itmt_prio(int cpu) |
| { |
| struct cppc_perf_caps cppc_perf; |
| static u32 max_highest_perf = 0, min_highest_perf = U32_MAX; |
| int ret; |
| |
| ret = cppc_get_perf_caps(cpu, &cppc_perf); |
| if (ret) |
| return; |
| |
| /* |
| * The priorities can be set regardless of whether or not |
| * sched_set_itmt_support(true) has been called and it is valid to |
| * update them at any time after it has been called. |
| */ |
| sched_set_itmt_core_prio(cppc_perf.highest_perf, cpu); |
| |
| if (max_highest_perf <= min_highest_perf) { |
| if (cppc_perf.highest_perf > max_highest_perf) |
| max_highest_perf = cppc_perf.highest_perf; |
| |
| if (cppc_perf.highest_perf < min_highest_perf) |
| min_highest_perf = cppc_perf.highest_perf; |
| |
| if (max_highest_perf > min_highest_perf) { |
| /* |
| * This code can be run during CPU online under the |
| * CPU hotplug locks, so sched_set_itmt_support() |
| * cannot be called from here. Queue up a work item |
| * to invoke it. |
| */ |
| schedule_work(&sched_itmt_work); |
| } |
| } |
| } |
| |
| static int intel_pstate_get_cppc_guranteed(int cpu) |
| { |
| struct cppc_perf_caps cppc_perf; |
| int ret; |
| |
| ret = cppc_get_perf_caps(cpu, &cppc_perf); |
| if (ret) |
| return ret; |
| |
| if (cppc_perf.guaranteed_perf) |
| return cppc_perf.guaranteed_perf; |
| |
| return cppc_perf.nominal_perf; |
| } |
| |
| #else /* CONFIG_ACPI_CPPC_LIB */ |
| static void intel_pstate_set_itmt_prio(int cpu) |
| { |
| } |
| #endif /* CONFIG_ACPI_CPPC_LIB */ |
| |
| static void intel_pstate_init_acpi_perf_limits(struct cpufreq_policy *policy) |
| { |
| struct cpudata *cpu; |
| int ret; |
| int i; |
| |
| if (hwp_active) { |
| intel_pstate_set_itmt_prio(policy->cpu); |
| return; |
| } |
| |
| if (!intel_pstate_get_ppc_enable_status()) |
| return; |
| |
| cpu = all_cpu_data[policy->cpu]; |
| |
| ret = acpi_processor_register_performance(&cpu->acpi_perf_data, |
| policy->cpu); |
| if (ret) |
| return; |
| |
| /* |
| * Check if the control value in _PSS is for PERF_CTL MSR, which should |
| * guarantee that the states returned by it map to the states in our |
| * list directly. |
| */ |
| if (cpu->acpi_perf_data.control_register.space_id != |
| ACPI_ADR_SPACE_FIXED_HARDWARE) |
| goto err; |
| |
| /* |
| * If there is only one entry _PSS, simply ignore _PSS and continue as |
| * usual without taking _PSS into account |
| */ |
| if (cpu->acpi_perf_data.state_count < 2) |
| goto err; |
| |
| pr_debug("CPU%u - ACPI _PSS perf data\n", policy->cpu); |
| for (i = 0; i < cpu->acpi_perf_data.state_count; i++) { |
| pr_debug(" %cP%d: %u MHz, %u mW, 0x%x\n", |
| (i == cpu->acpi_perf_data.state ? '*' : ' '), i, |
| (u32) cpu->acpi_perf_data.states[i].core_frequency, |
| (u32) cpu->acpi_perf_data.states[i].power, |
| (u32) cpu->acpi_perf_data.states[i].control); |
| } |
| |
| /* |
| * The _PSS table doesn't contain whole turbo frequency range. |
| * This just contains +1 MHZ above the max non turbo frequency, |
| * with control value corresponding to max turbo ratio. But |
| * when cpufreq set policy is called, it will call with this |
| * max frequency, which will cause a reduced performance as |
| * this driver uses real max turbo frequency as the max |
| * frequency. So correct this frequency in _PSS table to |
| * correct max turbo frequency based on the turbo state. |
| * Also need to convert to MHz as _PSS freq is in MHz. |
| */ |
| if (!global.turbo_disabled) |
| cpu->acpi_perf_data.states[0].core_frequency = |
| policy->cpuinfo.max_freq / 1000; |
| cpu->valid_pss_table = true; |
| pr_debug("_PPC limits will be enforced\n"); |
| |
| return; |
| |
| err: |
| cpu->valid_pss_table = false; |
| acpi_processor_unregister_performance(policy->cpu); |
| } |
| |
| static void intel_pstate_exit_perf_limits(struct cpufreq_policy *policy) |
| { |
| struct cpudata *cpu; |
| |
| cpu = all_cpu_data[policy->cpu]; |
| if (!cpu->valid_pss_table) |
| return; |
| |
| acpi_processor_unregister_performance(policy->cpu); |
| } |
| #else /* CONFIG_ACPI */ |
| static inline void intel_pstate_init_acpi_perf_limits(struct cpufreq_policy *policy) |
| { |
| } |
| |
| static inline void intel_pstate_exit_perf_limits(struct cpufreq_policy *policy) |
| { |
| } |
| |
| static inline bool intel_pstate_acpi_pm_profile_server(void) |
| { |
| return false; |
| } |
| #endif /* CONFIG_ACPI */ |
| |
| #ifndef CONFIG_ACPI_CPPC_LIB |
| static int intel_pstate_get_cppc_guranteed(int cpu) |
| { |
| return -ENOTSUPP; |
| } |
| #endif /* CONFIG_ACPI_CPPC_LIB */ |
| |
| static inline void update_turbo_state(void) |
| { |
| u64 misc_en; |
| struct cpudata *cpu; |
| |
| cpu = all_cpu_data[0]; |
| rdmsrl(MSR_IA32_MISC_ENABLE, misc_en); |
| global.turbo_disabled = |
| (misc_en & MSR_IA32_MISC_ENABLE_TURBO_DISABLE || |
| cpu->pstate.max_pstate == cpu->pstate.turbo_pstate); |
| } |
| |
| static int min_perf_pct_min(void) |
| { |
| struct cpudata *cpu = all_cpu_data[0]; |
| int turbo_pstate = cpu->pstate.turbo_pstate; |
| |
| return turbo_pstate ? |
| (cpu->pstate.min_pstate * 100 / turbo_pstate) : 0; |
| } |
| |
| static s16 intel_pstate_get_epb(struct cpudata *cpu_data) |
| { |
| u64 epb; |
| int ret; |
| |
| if (!boot_cpu_has(X86_FEATURE_EPB)) |
| return -ENXIO; |
| |
| ret = rdmsrl_on_cpu(cpu_data->cpu, MSR_IA32_ENERGY_PERF_BIAS, &epb); |
| if (ret) |
| return (s16)ret; |
| |
| return (s16)(epb & 0x0f); |
| } |
| |
| static s16 intel_pstate_get_epp(struct cpudata *cpu_data, u64 hwp_req_data) |
| { |
| s16 epp; |
| |
| if (boot_cpu_has(X86_FEATURE_HWP_EPP)) { |
| /* |
| * When hwp_req_data is 0, means that caller didn't read |
| * MSR_HWP_REQUEST, so need to read and get EPP. |
| */ |
| if (!hwp_req_data) { |
| epp = rdmsrl_on_cpu(cpu_data->cpu, MSR_HWP_REQUEST, |
| &hwp_req_data); |
| if (epp) |
| return epp; |
| } |
| epp = (hwp_req_data >> 24) & 0xff; |
| } else { |
| /* When there is no EPP present, HWP uses EPB settings */ |
| epp = intel_pstate_get_epb(cpu_data); |
| } |
| |
| return epp; |
| } |
| |
| static int intel_pstate_set_epb(int cpu, s16 pref) |
| { |
| u64 epb; |
| int ret; |
| |
| if (!boot_cpu_has(X86_FEATURE_EPB)) |
| return -ENXIO; |
| |
| ret = rdmsrl_on_cpu(cpu, MSR_IA32_ENERGY_PERF_BIAS, &epb); |
| if (ret) |
| return ret; |
| |
| epb = (epb & ~0x0f) | pref; |
| wrmsrl_on_cpu(cpu, MSR_IA32_ENERGY_PERF_BIAS, epb); |
| |
| return 0; |
| } |
| |
| /* |
| * EPP/EPB display strings corresponding to EPP index in the |
| * energy_perf_strings[] |
| * index String |
| *------------------------------------- |
| * 0 default |
| * 1 performance |
| * 2 balance_performance |
| * 3 balance_power |
| * 4 power |
| */ |
| static const char * const energy_perf_strings[] = { |
| "default", |
| "performance", |
| "balance_performance", |
| "balance_power", |
| "power", |
| NULL |
| }; |
| static const unsigned int epp_values[] = { |
| HWP_EPP_PERFORMANCE, |
| HWP_EPP_BALANCE_PERFORMANCE, |
| HWP_EPP_BALANCE_POWERSAVE, |
| HWP_EPP_POWERSAVE |
| }; |
| |
| static int intel_pstate_get_energy_pref_index(struct cpudata *cpu_data) |
| { |
| s16 epp; |
| int index = -EINVAL; |
| |
| epp = intel_pstate_get_epp(cpu_data, 0); |
| if (epp < 0) |
| return epp; |
| |
| if (boot_cpu_has(X86_FEATURE_HWP_EPP)) { |
| if (epp == HWP_EPP_PERFORMANCE) |
| return 1; |
| if (epp <= HWP_EPP_BALANCE_PERFORMANCE) |
| return 2; |
| if (epp <= HWP_EPP_BALANCE_POWERSAVE) |
| return 3; |
| else |
| return 4; |
| } else if (boot_cpu_has(X86_FEATURE_EPB)) { |
| /* |
| * Range: |
| * 0x00-0x03 : Performance |
| * 0x04-0x07 : Balance performance |
| * 0x08-0x0B : Balance power |
| * 0x0C-0x0F : Power |
| * The EPB is a 4 bit value, but our ranges restrict the |
| * value which can be set. Here only using top two bits |
| * effectively. |
| */ |
| index = (epp >> 2) + 1; |
| } |
| |
| return index; |
| } |
| |
| static int intel_pstate_set_energy_pref_index(struct cpudata *cpu_data, |
| int pref_index) |
| { |
| int epp = -EINVAL; |
| int ret; |
| |
| if (!pref_index) |
| epp = cpu_data->epp_default; |
| |
| mutex_lock(&intel_pstate_limits_lock); |
| |
| if (boot_cpu_has(X86_FEATURE_HWP_EPP)) { |
| u64 value; |
| |
| ret = rdmsrl_on_cpu(cpu_data->cpu, MSR_HWP_REQUEST, &value); |
| if (ret) |
| goto return_pref; |
| |
| value &= ~GENMASK_ULL(31, 24); |
| |
| if (epp == -EINVAL) |
| epp = epp_values[pref_index - 1]; |
| |
| value |= (u64)epp << 24; |
| ret = wrmsrl_on_cpu(cpu_data->cpu, MSR_HWP_REQUEST, value); |
| } else { |
| if (epp == -EINVAL) |
| epp = (pref_index - 1) << 2; |
| ret = intel_pstate_set_epb(cpu_data->cpu, epp); |
| } |
| return_pref: |
| mutex_unlock(&intel_pstate_limits_lock); |
| |
| return ret; |
| } |
| |
| static ssize_t show_energy_performance_available_preferences( |
| struct cpufreq_policy *policy, char *buf) |
| { |
| int i = 0; |
| int ret = 0; |
| |
| while (energy_perf_strings[i] != NULL) |
| ret += sprintf(&buf[ret], "%s ", energy_perf_strings[i++]); |
| |
| ret += sprintf(&buf[ret], "\n"); |
| |
| return ret; |
| } |
| |
| cpufreq_freq_attr_ro(energy_performance_available_preferences); |
| |
| static ssize_t store_energy_performance_preference( |
| struct cpufreq_policy *policy, const char *buf, size_t count) |
| { |
| struct cpudata *cpu_data = all_cpu_data[policy->cpu]; |
| char str_preference[21]; |
| int ret; |
| |
| ret = sscanf(buf, "%20s", str_preference); |
| if (ret != 1) |
| return -EINVAL; |
| |
| ret = match_string(energy_perf_strings, -1, str_preference); |
| if (ret < 0) |
| return ret; |
| |
| intel_pstate_set_energy_pref_index(cpu_data, ret); |
| return count; |
| } |
| |
| static ssize_t show_energy_performance_preference( |
| struct cpufreq_policy *policy, char *buf) |
| { |
| struct cpudata *cpu_data = all_cpu_data[policy->cpu]; |
| int preference; |
| |
| preference = intel_pstate_get_energy_pref_index(cpu_data); |
| if (preference < 0) |
| return preference; |
| |
| return sprintf(buf, "%s\n", energy_perf_strings[preference]); |
| } |
| |
| cpufreq_freq_attr_rw(energy_performance_preference); |
| |
| static ssize_t show_base_frequency(struct cpufreq_policy *policy, char *buf) |
| { |
| struct cpudata *cpu; |
| u64 cap; |
| int ratio; |
| |
| ratio = intel_pstate_get_cppc_guranteed(policy->cpu); |
| if (ratio <= 0) { |
| rdmsrl_on_cpu(policy->cpu, MSR_HWP_CAPABILITIES, &cap); |
| ratio = HWP_GUARANTEED_PERF(cap); |
| } |
| |
| cpu = all_cpu_data[policy->cpu]; |
| |
| return sprintf(buf, "%d\n", ratio * cpu->pstate.scaling); |
| } |
| |
| cpufreq_freq_attr_ro(base_frequency); |
| |
| static struct freq_attr *hwp_cpufreq_attrs[] = { |
| &energy_performance_preference, |
| &energy_performance_available_preferences, |
| &base_frequency, |
| NULL, |
| }; |
| |
| static void intel_pstate_get_hwp_max(unsigned int cpu, int *phy_max, |
| int *current_max) |
| { |
| u64 cap; |
| |
| rdmsrl_on_cpu(cpu, MSR_HWP_CAPABILITIES, &cap); |
| WRITE_ONCE(all_cpu_data[cpu]->hwp_cap_cached, cap); |
| if (global.no_turbo) |
| *current_max = HWP_GUARANTEED_PERF(cap); |
| else |
| *current_max = HWP_HIGHEST_PERF(cap); |
| |
| *phy_max = HWP_HIGHEST_PERF(cap); |
| } |
| |
| static void intel_pstate_hwp_set(unsigned int cpu) |
| { |
| struct cpudata *cpu_data = all_cpu_data[cpu]; |
| int max, min; |
| u64 value; |
| s16 epp; |
| |
| max = cpu_data->max_perf_ratio; |
| min = cpu_data->min_perf_ratio; |
| |
| if (cpu_data->policy == CPUFREQ_POLICY_PERFORMANCE) |
| min = max; |
| |
| rdmsrl_on_cpu(cpu, MSR_HWP_REQUEST, &value); |
| |
| value &= ~HWP_MIN_PERF(~0L); |
| value |= HWP_MIN_PERF(min); |
| |
| value &= ~HWP_MAX_PERF(~0L); |
| value |= HWP_MAX_PERF(max); |
| |
| if (cpu_data->epp_policy == cpu_data->policy) |
| goto skip_epp; |
| |
| cpu_data->epp_policy = cpu_data->policy; |
| |
| if (cpu_data->epp_saved >= 0) { |
| epp = cpu_data->epp_saved; |
| cpu_data->epp_saved = -EINVAL; |
| goto update_epp; |
| } |
| |
| if (cpu_data->policy == CPUFREQ_POLICY_PERFORMANCE) { |
| epp = intel_pstate_get_epp(cpu_data, value); |
| cpu_data->epp_powersave = epp; |
| /* If EPP read was failed, then don't try to write */ |
| if (epp < 0) |
| goto skip_epp; |
| |
| epp = 0; |
| } else { |
| /* skip setting EPP, when saved value is invalid */ |
| if (cpu_data->epp_powersave < 0) |
| goto skip_epp; |
| |
| /* |
| * No need to restore EPP when it is not zero. This |
| * means: |
| * - Policy is not changed |
| * - user has manually changed |
| * - Error reading EPB |
| */ |
| epp = intel_pstate_get_epp(cpu_data, value); |
| if (epp) |
| goto skip_epp; |
| |
| epp = cpu_data->epp_powersave; |
| } |
| update_epp: |
| if (boot_cpu_has(X86_FEATURE_HWP_EPP)) { |
| value &= ~GENMASK_ULL(31, 24); |
| value |= (u64)epp << 24; |
| } else { |
| intel_pstate_set_epb(cpu, epp); |
| } |
| skip_epp: |
| WRITE_ONCE(cpu_data->hwp_req_cached, value); |
| wrmsrl_on_cpu(cpu, MSR_HWP_REQUEST, value); |
| } |
| |
| static void intel_pstate_hwp_force_min_perf(int cpu) |
| { |
| u64 value; |
| int min_perf; |
| |
| value = all_cpu_data[cpu]->hwp_req_cached; |
| value &= ~GENMASK_ULL(31, 0); |
| min_perf = HWP_LOWEST_PERF(all_cpu_data[cpu]->hwp_cap_cached); |
| |
| /* Set hwp_max = hwp_min */ |
| value |= HWP_MAX_PERF(min_perf); |
| value |= HWP_MIN_PERF(min_perf); |
| |
| /* Set EPP/EPB to min */ |
| if (boot_cpu_has(X86_FEATURE_HWP_EPP)) |
| value |= HWP_ENERGY_PERF_PREFERENCE(HWP_EPP_POWERSAVE); |
| else |
| intel_pstate_set_epb(cpu, HWP_EPP_BALANCE_POWERSAVE); |
| |
| wrmsrl_on_cpu(cpu, MSR_HWP_REQUEST, value); |
| } |
| |
| static int intel_pstate_hwp_save_state(struct cpufreq_policy *policy) |
| { |
| struct cpudata *cpu_data = all_cpu_data[policy->cpu]; |
| |
| if (!hwp_active) |
| return 0; |
| |
| cpu_data->epp_saved = intel_pstate_get_epp(cpu_data, 0); |
| |
| return 0; |
| } |
| |
| static void intel_pstate_hwp_enable(struct cpudata *cpudata); |
| |
| static int intel_pstate_resume(struct cpufreq_policy *policy) |
| { |
| if (!hwp_active) |
| return 0; |
| |
| mutex_lock(&intel_pstate_limits_lock); |
| |
| if (policy->cpu == 0) |
| intel_pstate_hwp_enable(all_cpu_data[policy->cpu]); |
| |
| all_cpu_data[policy->cpu]->epp_policy = 0; |
| intel_pstate_hwp_set(policy->cpu); |
| |
| mutex_unlock(&intel_pstate_limits_lock); |
| |
| return 0; |
| } |
| |
| static void intel_pstate_update_policies(void) |
| { |
| int cpu; |
| |
| for_each_possible_cpu(cpu) |
| cpufreq_update_policy(cpu); |
| } |
| |
| static void intel_pstate_update_max_freq(unsigned int cpu) |
| { |
| struct cpufreq_policy *policy = cpufreq_cpu_acquire(cpu); |
| struct cpufreq_policy new_policy; |
| struct cpudata *cpudata; |
| |
| if (!policy) |
| return; |
| |
| cpudata = all_cpu_data[cpu]; |
| policy->cpuinfo.max_freq = global.turbo_disabled_mf ? |
| cpudata->pstate.max_freq : cpudata->pstate.turbo_freq; |
| |
| memcpy(&new_policy, policy, sizeof(*policy)); |
| new_policy.max = min(policy->user_policy.max, policy->cpuinfo.max_freq); |
| new_policy.min = min(policy->user_policy.min, new_policy.max); |
| |
| cpufreq_set_policy(policy, &new_policy); |
| |
| cpufreq_cpu_release(policy); |
| } |
| |
| static void intel_pstate_update_limits(unsigned int cpu) |
| { |
| mutex_lock(&intel_pstate_driver_lock); |
| |
| update_turbo_state(); |
| /* |
| * If turbo has been turned on or off globally, policy limits for |
| * all CPUs need to be updated to reflect that. |
| */ |
| if (global.turbo_disabled_mf != global.turbo_disabled) { |
| global.turbo_disabled_mf = global.turbo_disabled; |
| for_each_possible_cpu(cpu) |
| intel_pstate_update_max_freq(cpu); |
| } else { |
| cpufreq_update_policy(cpu); |
| } |
| |
| mutex_unlock(&intel_pstate_driver_lock); |
| } |
| |
| /************************** sysfs begin ************************/ |
| #define show_one(file_name, object) \ |
| static ssize_t show_##file_name \ |
| (struct kobject *kobj, struct kobj_attribute *attr, char *buf) \ |
| { \ |
| return sprintf(buf, "%u\n", global.object); \ |
| } |
| |
| static ssize_t intel_pstate_show_status(char *buf); |
| static int intel_pstate_update_status(const char *buf, size_t size); |
| |
| static ssize_t show_status(struct kobject *kobj, |
| struct kobj_attribute *attr, char *buf) |
| { |
| ssize_t ret; |
| |
| mutex_lock(&intel_pstate_driver_lock); |
| ret = intel_pstate_show_status(buf); |
| mutex_unlock(&intel_pstate_driver_lock); |
| |
| return ret; |
| } |
| |
| static ssize_t store_status(struct kobject *a, struct kobj_attribute *b, |
| const char *buf, size_t count) |
| { |
| char *p = memchr(buf, '\n', count); |
| int ret; |
| |
| mutex_lock(&intel_pstate_driver_lock); |
| ret = intel_pstate_update_status(buf, p ? p - buf : count); |
| mutex_unlock(&intel_pstate_driver_lock); |
| |
| return ret < 0 ? ret : count; |
| } |
| |
| static ssize_t show_turbo_pct(struct kobject *kobj, |
| struct kobj_attribute *attr, char *buf) |
| { |
| struct cpudata *cpu; |
| int total, no_turbo, turbo_pct; |
| uint32_t turbo_fp; |
| |
| mutex_lock(&intel_pstate_driver_lock); |
| |
| if (!intel_pstate_driver) { |
| mutex_unlock(&intel_pstate_driver_lock); |
| return -EAGAIN; |
| } |
| |
| cpu = all_cpu_data[0]; |
| |
| total = cpu->pstate.turbo_pstate - cpu->pstate.min_pstate + 1; |
| no_turbo = cpu->pstate.max_pstate - cpu->pstate.min_pstate + 1; |
| turbo_fp = div_fp(no_turbo, total); |
| turbo_pct = 100 - fp_toint(mul_fp(turbo_fp, int_tofp(100))); |
| |
| mutex_unlock(&intel_pstate_driver_lock); |
| |
| return sprintf(buf, "%u\n", turbo_pct); |
| } |
| |
| static ssize_t show_num_pstates(struct kobject *kobj, |
| struct kobj_attribute *attr, char *buf) |
| { |
| struct cpudata *cpu; |
| int total; |
| |
| mutex_lock(&intel_pstate_driver_lock); |
| |
| if (!intel_pstate_driver) { |
| mutex_unlock(&intel_pstate_driver_lock); |
| return -EAGAIN; |
| } |
| |
| cpu = all_cpu_data[0]; |
| total = cpu->pstate.turbo_pstate - cpu->pstate.min_pstate + 1; |
| |
| mutex_unlock(&intel_pstate_driver_lock); |
| |
| return sprintf(buf, "%u\n", total); |
| } |
| |
| static ssize_t show_no_turbo(struct kobject *kobj, |
| struct kobj_attribute *attr, char *buf) |
| { |
| ssize_t ret; |
| |
| mutex_lock(&intel_pstate_driver_lock); |
| |
| if (!intel_pstate_driver) { |
| mutex_unlock(&intel_pstate_driver_lock); |
| return -EAGAIN; |
| } |
| |
| update_turbo_state(); |
| if (global.turbo_disabled) |
| ret = sprintf(buf, "%u\n", global.turbo_disabled); |
| else |
| ret = sprintf(buf, "%u\n", global.no_turbo); |
| |
| mutex_unlock(&intel_pstate_driver_lock); |
| |
| return ret; |
| } |
| |
| static ssize_t store_no_turbo(struct kobject *a, struct kobj_attribute *b, |
| const char *buf, size_t count) |
| { |
| unsigned int input; |
| int ret; |
| |
| ret = sscanf(buf, "%u", &input); |
| if (ret != 1) |
| return -EINVAL; |
| |
| mutex_lock(&intel_pstate_driver_lock); |
| |
| if (!intel_pstate_driver) { |
| mutex_unlock(&intel_pstate_driver_lock); |
| return -EAGAIN; |
| } |
| |
| mutex_lock(&intel_pstate_limits_lock); |
| |
| update_turbo_state(); |
| if (global.turbo_disabled) { |
| pr_warn("Turbo disabled by BIOS or unavailable on processor\n"); |
| mutex_unlock(&intel_pstate_limits_lock); |
| mutex_unlock(&intel_pstate_driver_lock); |
| return -EPERM; |
| } |
| |
| global.no_turbo = clamp_t(int, input, 0, 1); |
| |
| if (global.no_turbo) { |
| struct cpudata *cpu = all_cpu_data[0]; |
| int pct = cpu->pstate.max_pstate * 100 / cpu->pstate.turbo_pstate; |
| |
| /* Squash the global minimum into the permitted range. */ |
| if (global.min_perf_pct > pct) |
| global.min_perf_pct = pct; |
| } |
| |
| mutex_unlock(&intel_pstate_limits_lock); |
| |
| intel_pstate_update_policies(); |
| |
| mutex_unlock(&intel_pstate_driver_lock); |
| |
| return count; |
| } |
| |
| static ssize_t store_max_perf_pct(struct kobject *a, struct kobj_attribute *b, |
| const char *buf, size_t count) |
| { |
| unsigned int input; |
| int ret; |
| |
| ret = sscanf(buf, "%u", &input); |
| if (ret != 1) |
| return -EINVAL; |
| |
| mutex_lock(&intel_pstate_driver_lock); |
| |
| if (!intel_pstate_driver) { |
| mutex_unlock(&intel_pstate_driver_lock); |
| return -EAGAIN; |
| } |
| |
| mutex_lock(&intel_pstate_limits_lock); |
| |
| global.max_perf_pct = clamp_t(int, input, global.min_perf_pct, 100); |
| |
| mutex_unlock(&intel_pstate_limits_lock); |
| |
| intel_pstate_update_policies(); |
| |
| mutex_unlock(&intel_pstate_driver_lock); |
| |
| return count; |
| } |
| |
| static ssize_t store_min_perf_pct(struct kobject *a, struct kobj_attribute *b, |
| const char *buf, size_t count) |
| { |
| unsigned int input; |
| int ret; |
| |
| ret = sscanf(buf, "%u", &input); |
| if (ret != 1) |
| return -EINVAL; |
| |
| mutex_lock(&intel_pstate_driver_lock); |
| |
| if (!intel_pstate_driver) { |
| mutex_unlock(&intel_pstate_driver_lock); |
| return -EAGAIN; |
| } |
| |
| mutex_lock(&intel_pstate_limits_lock); |
| |
| global.min_perf_pct = clamp_t(int, input, |
| min_perf_pct_min(), global.max_perf_pct); |
| |
| mutex_unlock(&intel_pstate_limits_lock); |
| |
| intel_pstate_update_policies(); |
| |
| mutex_unlock(&intel_pstate_driver_lock); |
| |
| return count; |
| } |
| |
| static ssize_t show_hwp_dynamic_boost(struct kobject *kobj, |
| struct kobj_attribute *attr, char *buf) |
| { |
| return sprintf(buf, "%u\n", hwp_boost); |
| } |
| |
| static ssize_t store_hwp_dynamic_boost(struct kobject *a, |
| struct kobj_attribute *b, |
| const char *buf, size_t count) |
| { |
| unsigned int input; |
| int ret; |
| |
| ret = kstrtouint(buf, 10, &input); |
| if (ret) |
| return ret; |
| |
| mutex_lock(&intel_pstate_driver_lock); |
| hwp_boost = !!input; |
| intel_pstate_update_policies(); |
| mutex_unlock(&intel_pstate_driver_lock); |
| |
| return count; |
| } |
| |
| show_one(max_perf_pct, max_perf_pct); |
| show_one(min_perf_pct, min_perf_pct); |
| |
| define_one_global_rw(status); |
| define_one_global_rw(no_turbo); |
| define_one_global_rw(max_perf_pct); |
| define_one_global_rw(min_perf_pct); |
| define_one_global_ro(turbo_pct); |
| define_one_global_ro(num_pstates); |
| define_one_global_rw(hwp_dynamic_boost); |
| |
| static struct attribute *intel_pstate_attributes[] = { |
| &status.attr, |
| &no_turbo.attr, |
| &turbo_pct.attr, |
| &num_pstates.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group intel_pstate_attr_group = { |
| .attrs = intel_pstate_attributes, |
| }; |
| |
| static void __init intel_pstate_sysfs_expose_params(void) |
| { |
| struct kobject *intel_pstate_kobject; |
| int rc; |
| |
| intel_pstate_kobject = kobject_create_and_add("intel_pstate", |
| &cpu_subsys.dev_root->kobj); |
| if (WARN_ON(!intel_pstate_kobject)) |
| return; |
| |
| rc = sysfs_create_group(intel_pstate_kobject, &intel_pstate_attr_group); |
| if (WARN_ON(rc)) |
| return; |
| |
| /* |
| * If per cpu limits are enforced there are no global limits, so |
| * return without creating max/min_perf_pct attributes |
| */ |
| if (per_cpu_limits) |
| return; |
| |
| rc = sysfs_create_file(intel_pstate_kobject, &max_perf_pct.attr); |
| WARN_ON(rc); |
| |
| rc = sysfs_create_file(intel_pstate_kobject, &min_perf_pct.attr); |
| WARN_ON(rc); |
| |
| if (hwp_active) { |
| rc = sysfs_create_file(intel_pstate_kobject, |
| &hwp_dynamic_boost.attr); |
| WARN_ON(rc); |
| } |
| } |
| /************************** sysfs end ************************/ |
| |
| static void intel_pstate_hwp_enable(struct cpudata *cpudata) |
| { |
| /* First disable HWP notification interrupt as we don't process them */ |
| if (boot_cpu_has(X86_FEATURE_HWP_NOTIFY)) |
| wrmsrl_on_cpu(cpudata->cpu, MSR_HWP_INTERRUPT, 0x00); |
| |
| wrmsrl_on_cpu(cpudata->cpu, MSR_PM_ENABLE, 0x1); |
| cpudata->epp_policy = 0; |
| if (cpudata->epp_default == -EINVAL) |
| cpudata->epp_default = intel_pstate_get_epp(cpudata, 0); |
| } |
| |
| #define MSR_IA32_POWER_CTL_BIT_EE 19 |
| |
| /* Disable energy efficiency optimization */ |
| static void intel_pstate_disable_ee(int cpu) |
| { |
| u64 power_ctl; |
| int ret; |
| |
| ret = rdmsrl_on_cpu(cpu, MSR_IA32_POWER_CTL, &power_ctl); |
| if (ret) |
| return; |
| |
| if (!(power_ctl & BIT(MSR_IA32_POWER_CTL_BIT_EE))) { |
| pr_info("Disabling energy efficiency optimization\n"); |
| power_ctl |= BIT(MSR_IA32_POWER_CTL_BIT_EE); |
| wrmsrl_on_cpu(cpu, MSR_IA32_POWER_CTL, power_ctl); |
| } |
| } |
| |
| static int atom_get_min_pstate(void) |
| { |
| u64 value; |
| |
| rdmsrl(MSR_ATOM_CORE_RATIOS, value); |
| return (value >> 8) & 0x7F; |
| } |
| |
| static int atom_get_max_pstate(void) |
| { |
| u64 value; |
| |
| rdmsrl(MSR_ATOM_CORE_RATIOS, value); |
| return (value >> 16) & 0x7F; |
| } |
| |
| static int atom_get_turbo_pstate(void) |
| { |
| u64 value; |
| |
| rdmsrl(MSR_ATOM_CORE_TURBO_RATIOS, value); |
| return value & 0x7F; |
| } |
| |
| static u64 atom_get_val(struct cpudata *cpudata, int pstate) |
| { |
| u64 val; |
| int32_t vid_fp; |
| u32 vid; |
| |
| val = (u64)pstate << 8; |
| if (global.no_turbo && !global.turbo_disabled) |
| val |= (u64)1 << 32; |
| |
| vid_fp = cpudata->vid.min + mul_fp( |
| int_tofp(pstate - cpudata->pstate.min_pstate), |
| cpudata->vid.ratio); |
| |
| vid_fp = clamp_t(int32_t, vid_fp, cpudata->vid.min, cpudata->vid.max); |
| vid = ceiling_fp(vid_fp); |
| |
| if (pstate > cpudata->pstate.max_pstate) |
| vid = cpudata->vid.turbo; |
| |
| return val | vid; |
| } |
| |
| static int silvermont_get_scaling(void) |
| { |
| u64 value; |
| int i; |
| /* Defined in Table 35-6 from SDM (Sept 2015) */ |
| static int silvermont_freq_table[] = { |
| 83300, 100000, 133300, 116700, 80000}; |
| |
| rdmsrl(MSR_FSB_FREQ, value); |
| i = value & 0x7; |
| WARN_ON(i > 4); |
| |
| return silvermont_freq_table[i]; |
| } |
| |
| static int airmont_get_scaling(void) |
| { |
| u64 value; |
| int i; |
| /* Defined in Table 35-10 from SDM (Sept 2015) */ |
| static int airmont_freq_table[] = { |
| 83300, 100000, 133300, 116700, 80000, |
| 93300, 90000, 88900, 87500}; |
| |
| rdmsrl(MSR_FSB_FREQ, value); |
| i = value & 0xF; |
| WARN_ON(i > 8); |
| |
| return airmont_freq_table[i]; |
| } |
| |
| static void atom_get_vid(struct cpudata *cpudata) |
| { |
| u64 value; |
| |
| rdmsrl(MSR_ATOM_CORE_VIDS, value); |
| cpudata->vid.min = int_tofp((value >> 8) & 0x7f); |
| cpudata->vid.max = int_tofp((value >> 16) & 0x7f); |
| cpudata->vid.ratio = div_fp( |
| cpudata->vid.max - cpudata->vid.min, |
| int_tofp(cpudata->pstate.max_pstate - |
| cpudata->pstate.min_pstate)); |
| |
| rdmsrl(MSR_ATOM_CORE_TURBO_VIDS, value); |
| cpudata->vid.turbo = value & 0x7f; |
| } |
| |
| static int core_get_min_pstate(void) |
| { |
| u64 value; |
| |
| rdmsrl(MSR_PLATFORM_INFO, value); |
| return (value >> 40) & 0xFF; |
| } |
| |
| static int core_get_max_pstate_physical(void) |
| { |
| u64 value; |
| |
| rdmsrl(MSR_PLATFORM_INFO, value); |
| return (value >> 8) & 0xFF; |
| } |
| |
| static int core_get_tdp_ratio(u64 plat_info) |
| { |
| /* Check how many TDP levels present */ |
| if (plat_info & 0x600000000) { |
| u64 tdp_ctrl; |
| u64 tdp_ratio; |
| int tdp_msr; |
| int err; |
| |
| /* Get the TDP level (0, 1, 2) to get ratios */ |
| err = rdmsrl_safe(MSR_CONFIG_TDP_CONTROL, &tdp_ctrl); |
| if (err) |
| return err; |
| |
| /* TDP MSR are continuous starting at 0x648 */ |
| tdp_msr = MSR_CONFIG_TDP_NOMINAL + (tdp_ctrl & 0x03); |
| err = rdmsrl_safe(tdp_msr, &tdp_ratio); |
| if (err) |
| return err; |
| |
| /* For level 1 and 2, bits[23:16] contain the ratio */ |
| if (tdp_ctrl & 0x03) |
| tdp_ratio >>= 16; |
| |
| tdp_ratio &= 0xff; /* ratios are only 8 bits long */ |
| pr_debug("tdp_ratio %x\n", (int)tdp_ratio); |
| |
| return (int)tdp_ratio; |
| } |
| |
| return -ENXIO; |
| } |
| |
| static int core_get_max_pstate(void) |
| { |
| u64 tar; |
| u64 plat_info; |
| int max_pstate; |
| int tdp_ratio; |
| int err; |
| |
| rdmsrl(MSR_PLATFORM_INFO, plat_info); |
| max_pstate = (plat_info >> 8) & 0xFF; |
| |
| tdp_ratio = core_get_tdp_ratio(plat_info); |
| if (tdp_ratio <= 0) |
| return max_pstate; |
| |
| if (hwp_active) { |
| /* Turbo activation ratio is not used on HWP platforms */ |
| return tdp_ratio; |
| } |
| |
| err = rdmsrl_safe(MSR_TURBO_ACTIVATION_RATIO, &tar); |
| if (!err) { |
| int tar_levels; |
| |
| /* Do some sanity checking for safety */ |
| tar_levels = tar & 0xff; |
| if (tdp_ratio - 1 == tar_levels) { |
| max_pstate = tar_levels; |
| pr_debug("max_pstate=TAC %x\n", max_pstate); |
| } |
| } |
| |
| return max_pstate; |
| } |
| |
| static int core_get_turbo_pstate(void) |
| { |
| u64 value; |
| int nont, ret; |
| |
| rdmsrl(MSR_TURBO_RATIO_LIMIT, value); |
| nont = core_get_max_pstate(); |
| ret = (value) & 255; |
| if (ret <= nont) |
| ret = nont; |
| return ret; |
| } |
| |
| static inline int core_get_scaling(void) |
| { |
| return 100000; |
| } |
| |
| static u64 core_get_val(struct cpudata *cpudata, int pstate) |
| { |
| u64 val; |
| |
| val = (u64)pstate << 8; |
| if (global.no_turbo && !global.turbo_disabled) |
| val |= (u64)1 << 32; |
| |
| return val; |
| } |
| |
| static int knl_get_aperf_mperf_shift(void) |
| { |
| return 10; |
| } |
| |
| static int knl_get_turbo_pstate(void) |
| { |
| u64 value; |
| int nont, ret; |
| |
| rdmsrl(MSR_TURBO_RATIO_LIMIT, value); |
| nont = core_get_max_pstate(); |
| ret = (((value) >> 8) & 0xFF); |
| if (ret <= nont) |
| ret = nont; |
| return ret; |
| } |
| |
| static void intel_pstate_set_pstate(struct cpudata *cpu, int pstate) |
| { |
| trace_cpu_frequency(pstate * cpu->pstate.scaling, cpu->cpu); |
| cpu->pstate.current_pstate = pstate; |
| /* |
| * Generally, there is no guarantee that this code will always run on |
| * the CPU being updated, so force the register update to run on the |
| * right CPU. |
| */ |
| wrmsrl_on_cpu(cpu->cpu, MSR_IA32_PERF_CTL, |
| pstate_funcs.get_val(cpu, pstate)); |
| } |
| |
| static void intel_pstate_set_min_pstate(struct cpudata *cpu) |
| { |
| intel_pstate_set_pstate(cpu, cpu->pstate.min_pstate); |
| } |
| |
| static void intel_pstate_max_within_limits(struct cpudata *cpu) |
| { |
| int pstate = max(cpu->pstate.min_pstate, cpu->max_perf_ratio); |
| |
| update_turbo_state(); |
| intel_pstate_set_pstate(cpu, pstate); |
| } |
| |
| static void intel_pstate_get_cpu_pstates(struct cpudata *cpu) |
| { |
| cpu->pstate.min_pstate = pstate_funcs.get_min(); |
| cpu->pstate.max_pstate = pstate_funcs.get_max(); |
| cpu->pstate.max_pstate_physical = pstate_funcs.get_max_physical(); |
| cpu->pstate.turbo_pstate = pstate_funcs.get_turbo(); |
| cpu->pstate.scaling = pstate_funcs.get_scaling(); |
| cpu->pstate.max_freq = cpu->pstate.max_pstate * cpu->pstate.scaling; |
| |
| if (hwp_active && !hwp_mode_bdw) { |
| unsigned int phy_max, current_max; |
| |
| intel_pstate_get_hwp_max(cpu->cpu, &phy_max, ¤t_max); |
| cpu->pstate.turbo_freq = phy_max * cpu->pstate.scaling; |
| } else { |
| cpu->pstate.turbo_freq = cpu->pstate.turbo_pstate * cpu->pstate.scaling; |
| } |
| |
| if (pstate_funcs.get_aperf_mperf_shift) |
| cpu->aperf_mperf_shift = pstate_funcs.get_aperf_mperf_shift(); |
| |
| if (pstate_funcs.get_vid) |
| pstate_funcs.get_vid(cpu); |
| |
| intel_pstate_set_min_pstate(cpu); |
| } |
| |
| /* |
| * Long hold time will keep high perf limits for long time, |
| * which negatively impacts perf/watt for some workloads, |
| * like specpower. 3ms is based on experiements on some |
| * workoads. |
| */ |
| static int hwp_boost_hold_time_ns = 3 * NSEC_PER_MSEC; |
| |
| static inline void intel_pstate_hwp_boost_up(struct cpudata *cpu) |
| { |
| u64 hwp_req = READ_ONCE(cpu->hwp_req_cached); |
| u32 max_limit = (hwp_req & 0xff00) >> 8; |
| u32 min_limit = (hwp_req & 0xff); |
| u32 boost_level1; |
| |
| /* |
| * Cases to consider (User changes via sysfs or boot time): |
| * If, P0 (Turbo max) = P1 (Guaranteed max) = min: |
| * No boost, return. |
| * If, P0 (Turbo max) > P1 (Guaranteed max) = min: |
| * Should result in one level boost only for P0. |
| * If, P0 (Turbo max) = P1 (Guaranteed max) > min: |
| * Should result in two level boost: |
| * (min + p1)/2 and P1. |
| * If, P0 (Turbo max) > P1 (Guaranteed max) > min: |
| * Should result in three level boost: |
| * (min + p1)/2, P1 and P0. |
| */ |
| |
| /* If max and min are equal or already at max, nothing to boost */ |
| if (max_limit == min_limit || cpu->hwp_boost_min >= max_limit) |
| return; |
| |
| if (!cpu->hwp_boost_min) |
| cpu->hwp_boost_min = min_limit; |
| |
| /* level at half way mark between min and guranteed */ |
| boost_level1 = (HWP_GUARANTEED_PERF(cpu->hwp_cap_cached) + min_limit) >> 1; |
| |
| if (cpu->hwp_boost_min < boost_level1) |
| cpu->hwp_boost_min = boost_level1; |
| else if (cpu->hwp_boost_min < HWP_GUARANTEED_PERF(cpu->hwp_cap_cached)) |
| cpu->hwp_boost_min = HWP_GUARANTEED_PERF(cpu->hwp_cap_cached); |
| else if (cpu->hwp_boost_min == HWP_GUARANTEED_PERF(cpu->hwp_cap_cached) && |
| max_limit != HWP_GUARANTEED_PERF(cpu->hwp_cap_cached)) |
| cpu->hwp_boost_min = max_limit; |
| else |
| return; |
| |
| hwp_req = (hwp_req & ~GENMASK_ULL(7, 0)) | cpu->hwp_boost_min; |
| wrmsrl(MSR_HWP_REQUEST, hwp_req); |
| cpu->last_update = cpu->sample.time; |
| } |
| |
| static inline void intel_pstate_hwp_boost_down(struct cpudata *cpu) |
| { |
| if (cpu->hwp_boost_min) { |
| bool expired; |
| |
| /* Check if we are idle for hold time to boost down */ |
| expired = time_after64(cpu->sample.time, cpu->last_update + |
| hwp_boost_hold_time_ns); |
| if (expired) { |
| wrmsrl(MSR_HWP_REQUEST, cpu->hwp_req_cached); |
| cpu->hwp_boost_min = 0; |
| } |
| } |
| cpu->last_update = cpu->sample.time; |
| } |
| |
| static inline void intel_pstate_update_util_hwp_local(struct cpudata *cpu, |
| u64 time) |
| { |
| cpu->sample.time = time; |
| |
| if (cpu->sched_flags & SCHED_CPUFREQ_IOWAIT) { |
| bool do_io = false; |
| |
| cpu->sched_flags = 0; |
| /* |
| * Set iowait_boost flag and update time. Since IO WAIT flag |
| * is set all the time, we can't just conclude that there is |
| * some IO bound activity is scheduled on this CPU with just |
| * one occurrence. If we receive at least two in two |
| * consecutive ticks, then we treat as boost candidate. |
| */ |
| if (time_before64(time, cpu->last_io_update + 2 * TICK_NSEC)) |
| do_io = true; |
| |
| cpu->last_io_update = time; |
| |
| if (do_io) |
| intel_pstate_hwp_boost_up(cpu); |
| |
| } else { |
| intel_pstate_hwp_boost_down(cpu); |
| } |
| } |
| |
| static inline void intel_pstate_update_util_hwp(struct update_util_data *data, |
| u64 time, unsigned int flags) |
| { |
| struct cpudata *cpu = container_of(data, struct cpudata, update_util); |
| |
| cpu->sched_flags |= flags; |
| |
| if (smp_processor_id() == cpu->cpu) |
| intel_pstate_update_util_hwp_local(cpu, time); |
| } |
| |
| static inline void intel_pstate_calc_avg_perf(struct cpudata *cpu) |
| { |
| struct sample *sample = &cpu->sample; |
| |
| sample->core_avg_perf = div_ext_fp(sample->aperf, sample->mperf); |
| } |
| |
| static inline bool intel_pstate_sample(struct cpudata *cpu, u64 time) |
| { |
| u64 aperf, mperf; |
| unsigned long flags; |
| u64 tsc; |
| |
| local_irq_save(flags); |
| rdmsrl(MSR_IA32_APERF, aperf); |
| rdmsrl(MSR_IA32_MPERF, mperf); |
| tsc = rdtsc(); |
| if (cpu->prev_mperf == mperf || cpu->prev_tsc == tsc) { |
| local_irq_restore(flags); |
| return false; |
| } |
| local_irq_restore(flags); |
| |
| cpu->last_sample_time = cpu->sample.time; |
| cpu->sample.time = time; |
| cpu->sample.aperf = aperf; |
| cpu->sample.mperf = mperf; |
| cpu->sample.tsc = tsc; |
| cpu->sample.aperf -= cpu->prev_aperf; |
| cpu->sample.mperf -= cpu->prev_mperf; |
| cpu->sample.tsc -= cpu->prev_tsc; |
| |
| cpu->prev_aperf = aperf; |
| cpu->prev_mperf = mperf; |
| cpu->prev_tsc = tsc; |
| /* |
| * First time this function is invoked in a given cycle, all of the |
| * previous sample data fields are equal to zero or stale and they must |
| * be populated with meaningful numbers for things to work, so assume |
| * that sample.time will always be reset before setting the utilization |
| * update hook and make the caller skip the sample then. |
| */ |
| if (cpu->last_sample_time) { |
| intel_pstate_calc_avg_perf(cpu); |
| return true; |
| } |
| return false; |
| } |
| |
| static inline int32_t get_avg_frequency(struct cpudata *cpu) |
| { |
| return mul_ext_fp(cpu->sample.core_avg_perf, cpu_khz); |
| } |
| |
| static inline int32_t get_avg_pstate(struct cpudata *cpu) |
| { |
| return mul_ext_fp(cpu->pstate.max_pstate_physical, |
| cpu->sample.core_avg_perf); |
| } |
| |
| static inline int32_t get_target_pstate(struct cpudata *cpu) |
| { |
| struct sample *sample = &cpu->sample; |
| int32_t busy_frac; |
| int target, avg_pstate; |
| |
| busy_frac = div_fp(sample->mperf << cpu->aperf_mperf_shift, |
| sample->tsc); |
| |
| if (busy_frac < cpu->iowait_boost) |
| busy_frac = cpu->iowait_boost; |
| |
| sample->busy_scaled = busy_frac * 100; |
| |
| target = global.no_turbo || global.turbo_disabled ? |
| cpu->pstate.max_pstate : cpu->pstate.turbo_pstate; |
| target += target >> 2; |
| target = mul_fp(target, busy_frac); |
| if (target < cpu->pstate.min_pstate) |
| target = cpu->pstate.min_pstate; |
| |
| /* |
| * If the average P-state during the previous cycle was higher than the |
| * current target, add 50% of the difference to the target to reduce |
| * possible performance oscillations and offset possible performance |
| * loss related to moving the workload from one CPU to another within |
| * a package/module. |
| */ |
| avg_pstate = get_avg_pstate(cpu); |
| if (avg_pstate > target) |
| target += (avg_pstate - target) >> 1; |
| |
| return target; |
| } |
| |
| static int intel_pstate_prepare_request(struct cpudata *cpu, int pstate) |
| { |
| int min_pstate = max(cpu->pstate.min_pstate, cpu->min_perf_ratio); |
| int max_pstate = max(min_pstate, cpu->max_perf_ratio); |
| |
| return clamp_t(int, pstate, min_pstate, max_pstate); |
| } |
| |
| static void intel_pstate_update_pstate(struct cpudata *cpu, int pstate) |
| { |
| if (pstate == cpu->pstate.current_pstate) |
| return; |
| |
| cpu->pstate.current_pstate = pstate; |
| wrmsrl(MSR_IA32_PERF_CTL, pstate_funcs.get_val(cpu, pstate)); |
| } |
| |
| static void intel_pstate_adjust_pstate(struct cpudata *cpu) |
| { |
| int from = cpu->pstate.current_pstate; |
| struct sample *sample; |
| int target_pstate; |
| |
| update_turbo_state(); |
| |
| target_pstate = get_target_pstate(cpu); |
| target_pstate = intel_pstate_prepare_request(cpu, target_pstate); |
| trace_cpu_frequency(target_pstate * cpu->pstate.scaling, cpu->cpu); |
| intel_pstate_update_pstate(cpu, target_pstate); |
| |
| sample = &cpu->sample; |
| trace_pstate_sample(mul_ext_fp(100, sample->core_avg_perf), |
| fp_toint(sample->busy_scaled), |
| from, |
| cpu->pstate.current_pstate, |
| sample->mperf, |
| sample->aperf, |
| sample->tsc, |
| get_avg_frequency(cpu), |
| fp_toint(cpu->iowait_boost * 100)); |
| } |
| |
| static void intel_pstate_update_util(struct update_util_data *data, u64 time, |
| unsigned int flags) |
| { |
| struct cpudata *cpu = container_of(data, struct cpudata, update_util); |
| u64 delta_ns; |
| |
| /* Don't allow remote callbacks */ |
| if (smp_processor_id() != cpu->cpu) |
| return; |
| |
| delta_ns = time - cpu->last_update; |
| if (flags & SCHED_CPUFREQ_IOWAIT) { |
| /* Start over if the CPU may have been idle. */ |
| if (delta_ns > TICK_NSEC) { |
| cpu->iowait_boost = ONE_EIGHTH_FP; |
| } else if (cpu->iowait_boost >= ONE_EIGHTH_FP) { |
| cpu->iowait_boost <<= 1; |
| if (cpu->iowait_boost > int_tofp(1)) |
| cpu->iowait_boost = int_tofp(1); |
| } else { |
| cpu->iowait_boost = ONE_EIGHTH_FP; |
| } |
| } else if (cpu->iowait_boost) { |
| /* Clear iowait_boost if the CPU may have been idle. */ |
| if (delta_ns > TICK_NSEC) |
| cpu->iowait_boost = 0; |
| else |
| cpu->iowait_boost >>= 1; |
| } |
| cpu->last_update = time; |
| delta_ns = time - cpu->sample.time; |
| if ((s64)delta_ns < INTEL_PSTATE_SAMPLING_INTERVAL) |
| return; |
| |
| if (intel_pstate_sample(cpu, time)) |
| intel_pstate_adjust_pstate(cpu); |
| } |
| |
| static struct pstate_funcs core_funcs = { |
| .get_max = core_get_max_pstate, |
| .get_max_physical = core_get_max_pstate_physical, |
| .get_min = core_get_min_pstate, |
| .get_turbo = core_get_turbo_pstate, |
| .get_scaling = core_get_scaling, |
| .get_val = core_get_val, |
| }; |
| |
| static const struct pstate_funcs silvermont_funcs = { |
| .get_max = atom_get_max_pstate, |
| .get_max_physical = atom_get_max_pstate, |
| .get_min = atom_get_min_pstate, |
| .get_turbo = atom_get_turbo_pstate, |
| .get_val = atom_get_val, |
| .get_scaling = silvermont_get_scaling, |
| .get_vid = atom_get_vid, |
| }; |
| |
| static const struct pstate_funcs airmont_funcs = { |
| .get_max = atom_get_max_pstate, |
| .get_max_physical = atom_get_max_pstate, |
| .get_min = atom_get_min_pstate, |
| .get_turbo = atom_get_turbo_pstate, |
| .get_val = atom_get_val, |
| .get_scaling = airmont_get_scaling, |
| .get_vid = atom_get_vid, |
| }; |
| |
| static const struct pstate_funcs knl_funcs = { |
| .get_max = core_get_max_pstate, |
| .get_max_physical = core_get_max_pstate_physical, |
| .get_min = core_get_min_pstate, |
| .get_turbo = knl_get_turbo_pstate, |
| .get_aperf_mperf_shift = knl_get_aperf_mperf_shift, |
| .get_scaling = core_get_scaling, |
| .get_val = core_get_val, |
| }; |
| |
| #define ICPU(model, policy) \ |
| { X86_VENDOR_INTEL, 6, model, X86_FEATURE_APERFMPERF,\ |
| (unsigned long)&policy } |
| |
| static const struct x86_cpu_id intel_pstate_cpu_ids[] = { |
| ICPU(INTEL_FAM6_SANDYBRIDGE, core_funcs), |
| ICPU(INTEL_FAM6_SANDYBRIDGE_X, core_funcs), |
| ICPU(INTEL_FAM6_ATOM_SILVERMONT, silvermont_funcs), |
| ICPU(INTEL_FAM6_IVYBRIDGE, core_funcs), |
| ICPU(INTEL_FAM6_HASWELL_CORE, core_funcs), |
| ICPU(INTEL_FAM6_BROADWELL_CORE, core_funcs), |
| ICPU(INTEL_FAM6_IVYBRIDGE_X, core_funcs), |
| ICPU(INTEL_FAM6_HASWELL_X, core_funcs), |
| ICPU(INTEL_FAM6_HASWELL_ULT, core_funcs), |
| ICPU(INTEL_FAM6_HASWELL_GT3E, core_funcs), |
| ICPU(INTEL_FAM6_BROADWELL_GT3E, core_funcs), |
| ICPU(INTEL_FAM6_ATOM_AIRMONT, airmont_funcs), |
| ICPU(INTEL_FAM6_SKYLAKE_MOBILE, core_funcs), |
| ICPU(INTEL_FAM6_BROADWELL_X, core_funcs), |
| ICPU(INTEL_FAM6_SKYLAKE_DESKTOP, core_funcs), |
| ICPU(INTEL_FAM6_BROADWELL_XEON_D, core_funcs), |
| ICPU(INTEL_FAM6_XEON_PHI_KNL, knl_funcs), |
| ICPU(INTEL_FAM6_XEON_PHI_KNM, knl_funcs), |
| ICPU(INTEL_FAM6_ATOM_GOLDMONT, core_funcs), |
| ICPU(INTEL_FAM6_ATOM_GOLDMONT_PLUS, core_funcs), |
| ICPU(INTEL_FAM6_SKYLAKE_X, core_funcs), |
| {} |
| }; |
| MODULE_DEVICE_TABLE(x86cpu, intel_pstate_cpu_ids); |
| |
| static const struct x86_cpu_id intel_pstate_cpu_oob_ids[] __initconst = { |
| ICPU(INTEL_FAM6_BROADWELL_XEON_D, core_funcs), |
| ICPU(INTEL_FAM6_BROADWELL_X, core_funcs), |
| ICPU(INTEL_FAM6_SKYLAKE_X, core_funcs), |
| {} |
| }; |
| |
| static const struct x86_cpu_id intel_pstate_cpu_ee_disable_ids[] = { |
| ICPU(INTEL_FAM6_KABYLAKE_DESKTOP, core_funcs), |
| {} |
| }; |
| |
| static const struct x86_cpu_id intel_pstate_hwp_boost_ids[] = { |
| ICPU(INTEL_FAM6_SKYLAKE_X, core_funcs), |
| ICPU(INTEL_FAM6_SKYLAKE_DESKTOP, core_funcs), |
| {} |
| }; |
| |
| static int intel_pstate_init_cpu(unsigned int cpunum) |
| { |
| struct cpudata *cpu; |
| |
| cpu = all_cpu_data[cpunum]; |
| |
| if (!cpu) { |
| cpu = kzalloc(sizeof(*cpu), GFP_KERNEL); |
| if (!cpu) |
| return -ENOMEM; |
| |
| all_cpu_data[cpunum] = cpu; |
| |
| cpu->epp_default = -EINVAL; |
| cpu->epp_powersave = -EINVAL; |
| cpu->epp_saved = -EINVAL; |
| } |
| |
| cpu = all_cpu_data[cpunum]; |
| |
| cpu->cpu = cpunum; |
| |
| if (hwp_active) { |
| const struct x86_cpu_id *id; |
| |
| id = x86_match_cpu(intel_pstate_cpu_ee_disable_ids); |
| if (id) |
| intel_pstate_disable_ee(cpunum); |
| |
| intel_pstate_hwp_enable(cpu); |
| |
| id = x86_match_cpu(intel_pstate_hwp_boost_ids); |
| if (id && intel_pstate_acpi_pm_profile_server()) |
| hwp_boost = true; |
| } |
| |
| intel_pstate_get_cpu_pstates(cpu); |
| |
| pr_debug("controlling: cpu %d\n", cpunum); |
| |
| return 0; |
| } |
| |
| static void intel_pstate_set_update_util_hook(unsigned int cpu_num) |
| { |
| struct cpudata *cpu = all_cpu_data[cpu_num]; |
| |
| if (hwp_active && !hwp_boost) |
| return; |
| |
| if (cpu->update_util_set) |
| return; |
| |
| /* Prevent intel_pstate_update_util() from using stale data. */ |
| cpu->sample.time = 0; |
| cpufreq_add_update_util_hook(cpu_num, &cpu->update_util, |
| (hwp_active ? |
| intel_pstate_update_util_hwp : |
| intel_pstate_update_util)); |
| cpu->update_util_set = true; |
| } |
| |
| static void intel_pstate_clear_update_util_hook(unsigned int cpu) |
| { |
| struct cpudata *cpu_data = all_cpu_data[cpu]; |
| |
| if (!cpu_data->update_util_set) |
| return; |
| |
| cpufreq_remove_update_util_hook(cpu); |
| cpu_data->update_util_set = false; |
| synchronize_rcu(); |
| } |
| |
| static int intel_pstate_get_max_freq(struct cpudata *cpu) |
| { |
| return global.turbo_disabled || global.no_turbo ? |
| cpu->pstate.max_freq : cpu->pstate.turbo_freq; |
| } |
| |
| static void intel_pstate_update_perf_limits(struct cpufreq_policy *policy, |
| struct cpudata *cpu) |
| { |
| int max_freq = intel_pstate_get_max_freq(cpu); |
| int32_t max_policy_perf, min_policy_perf; |
| int max_state, turbo_max; |
| |
| /* |
| * HWP needs some special consideration, because on BDX the |
| * HWP_REQUEST uses abstract value to represent performance |
| * rather than pure ratios. |
| */ |
| if (hwp_active) { |
| intel_pstate_get_hwp_max(cpu->cpu, &turbo_max, &max_state); |
| } else { |
| max_state = global.no_turbo || global.turbo_disabled ? |
| cpu->pstate.max_pstate : cpu->pstate.turbo_pstate; |
| turbo_max = cpu->pstate.turbo_pstate; |
| } |
| |
| max_policy_perf = max_state * policy->max / max_freq; |
| if (policy->max == policy->min) { |
| min_policy_perf = max_policy_perf; |
| } else { |
| min_policy_perf = max_state * policy->min / max_freq; |
| min_policy_perf = clamp_t(int32_t, min_policy_perf, |
| 0, max_policy_perf); |
| } |
| |
| pr_debug("cpu:%d max_state %d min_policy_perf:%d max_policy_perf:%d\n", |
| policy->cpu, max_state, |
| min_policy_perf, max_policy_perf); |
| |
| /* Normalize user input to [min_perf, max_perf] */ |
| if (per_cpu_limits) { |
| cpu->min_perf_ratio = min_policy_perf; |
| cpu->max_perf_ratio = max_policy_perf; |
| } else { |
| int32_t global_min, global_max; |
| |
| /* Global limits are in percent of the maximum turbo P-state. */ |
| global_max = DIV_ROUND_UP(turbo_max * global.max_perf_pct, 100); |
| global_min = DIV_ROUND_UP(turbo_max * global.min_perf_pct, 100); |
| global_min = clamp_t(int32_t, global_min, 0, global_max); |
| |
| pr_debug("cpu:%d global_min:%d global_max:%d\n", policy->cpu, |
| global_min, global_max); |
| |
| cpu->min_perf_ratio = max(min_policy_perf, global_min); |
| cpu->min_perf_ratio = min(cpu->min_perf_ratio, max_policy_perf); |
| cpu->max_perf_ratio = min(max_policy_perf, global_max); |
| cpu->max_perf_ratio = max(min_policy_perf, cpu->max_perf_ratio); |
| |
| /* Make sure min_perf <= max_perf */ |
| cpu->min_perf_ratio = min(cpu->min_perf_ratio, |
| cpu->max_perf_ratio); |
| |
| } |
| pr_debug("cpu:%d max_perf_ratio:%d min_perf_ratio:%d\n", policy->cpu, |
| cpu->max_perf_ratio, |
| cpu->min_perf_ratio); |
| } |
| |
| static int intel_pstate_set_policy(struct cpufreq_policy *policy) |
| { |
| struct cpudata *cpu; |
| |
| if (!policy->cpuinfo.max_freq) |
| return -ENODEV; |
| |
| pr_debug("set_policy cpuinfo.max %u policy->max %u\n", |
| policy->cpuinfo.max_freq, policy->max); |
| |
| cpu = all_cpu_data[policy->cpu]; |
| cpu->policy = policy->policy; |
| |
| mutex_lock(&intel_pstate_limits_lock); |
| |
| intel_pstate_update_perf_limits(policy, cpu); |
| |
| if (cpu->policy == CPUFREQ_POLICY_PERFORMANCE) { |
| /* |
| * NOHZ_FULL CPUs need this as the governor callback may not |
| * be invoked on them. |
| */ |
| intel_pstate_clear_update_util_hook(policy->cpu); |
| intel_pstate_max_within_limits(cpu); |
| } else { |
| intel_pstate_set_update_util_hook(policy->cpu); |
| } |
| |
| if (hwp_active) { |
| /* |
| * When hwp_boost was active before and dynamically it |
| * was turned off, in that case we need to clear the |
| * update util hook. |
| */ |
| if (!hwp_boost) |
| intel_pstate_clear_update_util_hook(policy->cpu); |
| intel_pstate_hwp_set(policy->cpu); |
| } |
| |
| mutex_unlock(&intel_pstate_limits_lock); |
| |
| return 0; |
| } |
| |
| static void intel_pstate_adjust_policy_max(struct cpufreq_policy *policy, |
| struct cpudata *cpu) |
| { |
| if (!hwp_active && |
| cpu->pstate.max_pstate_physical > cpu->pstate.max_pstate && |
| policy->max < policy->cpuinfo.max_freq && |
| policy->max > cpu->pstate.max_freq) { |
| pr_debug("policy->max > max non turbo frequency\n"); |
| policy->max = policy->cpuinfo.max_freq; |
| } |
| } |
| |
| static int intel_pstate_verify_policy(struct cpufreq_policy *policy) |
| { |
| struct cpudata *cpu = all_cpu_data[policy->cpu]; |
| |
| update_turbo_state(); |
| cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, |
| intel_pstate_get_max_freq(cpu)); |
| |
| if (policy->policy != CPUFREQ_POLICY_POWERSAVE && |
| policy->policy != CPUFREQ_POLICY_PERFORMANCE) |
| return -EINVAL; |
| |
| intel_pstate_adjust_policy_max(policy, cpu); |
| |
| return 0; |
| } |
| |
| static void intel_cpufreq_stop_cpu(struct cpufreq_policy *policy) |
| { |
| intel_pstate_set_min_pstate(all_cpu_data[policy->cpu]); |
| } |
| |
| static void intel_pstate_stop_cpu(struct cpufreq_policy *policy) |
| { |
| pr_debug("CPU %d exiting\n", policy->cpu); |
| |
| intel_pstate_clear_update_util_hook(policy->cpu); |
| if (hwp_active) { |
| intel_pstate_hwp_save_state(policy); |
| intel_pstate_hwp_force_min_perf(policy->cpu); |
| } else { |
| intel_cpufreq_stop_cpu(policy); |
| } |
| } |
| |
| static int intel_pstate_cpu_exit(struct cpufreq_policy *policy) |
| { |
| intel_pstate_exit_perf_limits(policy); |
| |
| policy->fast_switch_possible = false; |
| |
| return 0; |
| } |
| |
| static int __intel_pstate_cpu_init(struct cpufreq_policy *policy) |
| { |
| struct cpudata *cpu; |
| int rc; |
| |
| rc = intel_pstate_init_cpu(policy->cpu); |
| if (rc) |
| return rc; |
| |
| cpu = all_cpu_data[policy->cpu]; |
| |
| cpu->max_perf_ratio = 0xFF; |
| cpu->min_perf_ratio = 0; |
| |
| policy->min = cpu->pstate.min_pstate * cpu->pstate.scaling; |
| policy->max = cpu->pstate.turbo_pstate * cpu->pstate.scaling; |
| |
| /* cpuinfo and default policy values */ |
| policy->cpuinfo.min_freq = cpu->pstate.min_pstate * cpu->pstate.scaling; |
| update_turbo_state(); |
| global.turbo_disabled_mf = global.turbo_disabled; |
| policy->cpuinfo.max_freq = global.turbo_disabled ? |
| cpu->pstate.max_pstate : cpu->pstate.turbo_pstate; |
| policy->cpuinfo.max_freq *= cpu->pstate.scaling; |
| |
| if (hwp_active) { |
| unsigned int max_freq; |
| |
| max_freq = global.turbo_disabled ? |
| cpu->pstate.max_freq : cpu->pstate.turbo_freq; |
| if (max_freq < policy->cpuinfo.max_freq) |
| policy->cpuinfo.max_freq = max_freq; |
| } |
| |
| intel_pstate_init_acpi_perf_limits(policy); |
| |
| policy->fast_switch_possible = true; |
| |
| return 0; |
| } |
| |
| static int intel_pstate_cpu_init(struct cpufreq_policy *policy) |
| { |
| int ret = __intel_pstate_cpu_init(policy); |
| |
| if (ret) |
| return ret; |
| |
| if (IS_ENABLED(CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE)) |
| policy->policy = CPUFREQ_POLICY_PERFORMANCE; |
| else |
| policy->policy = CPUFREQ_POLICY_POWERSAVE; |
| |
| return 0; |
| } |
| |
| static struct cpufreq_driver intel_pstate = { |
| .flags = CPUFREQ_CONST_LOOPS, |
| .verify = intel_pstate_verify_policy, |
| .setpolicy = intel_pstate_set_policy, |
| .suspend = intel_pstate_hwp_save_state, |
| .resume = intel_pstate_resume, |
| .init = intel_pstate_cpu_init, |
| .exit = intel_pstate_cpu_exit, |
| .stop_cpu = intel_pstate_stop_cpu, |
| .update_limits = intel_pstate_update_limits, |
| .name = "intel_pstate", |
| }; |
| |
| static int intel_cpufreq_verify_policy(struct cpufreq_policy *policy) |
| { |
| struct cpudata *cpu = all_cpu_data[policy->cpu]; |
| |
| update_turbo_state(); |
| cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, |
| intel_pstate_get_max_freq(cpu)); |
| |
| intel_pstate_adjust_policy_max(policy, cpu); |
| |
| intel_pstate_update_perf_limits(policy, cpu); |
| |
| return 0; |
| } |
| |
| /* Use of trace in passive mode: |
| * |
| * In passive mode the trace core_busy field (also known as the |
| * performance field, and lablelled as such on the graphs; also known as |
| * core_avg_perf) is not needed and so is re-assigned to indicate if the |
| * driver call was via the normal or fast switch path. Various graphs |
| * output from the intel_pstate_tracer.py utility that include core_busy |
| * (or performance or core_avg_perf) have a fixed y-axis from 0 to 100%, |
| * so we use 10 to indicate the the normal path through the driver, and |
| * 90 to indicate the fast switch path through the driver. |
| * The scaled_busy field is not used, and is set to 0. |
| */ |
| |
| #define INTEL_PSTATE_TRACE_TARGET 10 |
| #define INTEL_PSTATE_TRACE_FAST_SWITCH 90 |
| |
| static void intel_cpufreq_trace(struct cpudata *cpu, unsigned int trace_type, int old_pstate) |
| { |
| struct sample *sample; |
| |
| if (!trace_pstate_sample_enabled()) |
| return; |
| |
| if (!intel_pstate_sample(cpu, ktime_get())) |
| return; |
| |
| sample = &cpu->sample; |
| trace_pstate_sample(trace_type, |
| 0, |
| old_pstate, |
| cpu->pstate.current_pstate, |
| sample->mperf, |
| sample->aperf, |
| sample->tsc, |
| get_avg_frequency(cpu), |
| fp_toint(cpu->iowait_boost * 100)); |
| } |
| |
| static int intel_cpufreq_target(struct cpufreq_policy *policy, |
| unsigned int target_freq, |
| unsigned int relation) |
| { |
| struct cpudata *cpu = all_cpu_data[policy->cpu]; |
| struct cpufreq_freqs freqs; |
| int target_pstate, old_pstate; |
| |
| update_turbo_state(); |
| |
| freqs.old = policy->cur; |
| freqs.new = target_freq; |
| |
| cpufreq_freq_transition_begin(policy, &freqs); |
| switch (relation) { |
| case CPUFREQ_RELATION_L: |
| target_pstate = DIV_ROUND_UP(freqs.new, cpu->pstate.scaling); |
| break; |
| case CPUFREQ_RELATION_H: |
| target_pstate = freqs.new / cpu->pstate.scaling; |
| break; |
| default: |
| target_pstate = DIV_ROUND_CLOSEST(freqs.new, cpu->pstate.scaling); |
| break; |
| } |
| target_pstate = intel_pstate_prepare_request(cpu, target_pstate); |
| old_pstate = cpu->pstate.current_pstate; |
| if (target_pstate != cpu->pstate.current_pstate) { |
| cpu->pstate.current_pstate = target_pstate; |
| wrmsrl_on_cpu(policy->cpu, MSR_IA32_PERF_CTL, |
| pstate_funcs.get_val(cpu, target_pstate)); |
| } |
| freqs.new = target_pstate * cpu->pstate.scaling; |
| intel_cpufreq_trace(cpu, INTEL_PSTATE_TRACE_TARGET, old_pstate); |
| cpufreq_freq_transition_end(policy, &freqs, false); |
| |
| return 0; |
| } |
| |
| static unsigned int intel_cpufreq_fast_switch(struct cpufreq_policy *policy, |
| unsigned int target_freq) |
| { |
| struct cpudata *cpu = all_cpu_data[policy->cpu]; |
| int target_pstate, old_pstate; |
| |
| update_turbo_state(); |
| |
| target_pstate = DIV_ROUND_UP(target_freq, cpu->pstate.scaling); |
| target_pstate = intel_pstate_prepare_request(cpu, target_pstate); |
| old_pstate = cpu->pstate.current_pstate; |
| intel_pstate_update_pstate(cpu, target_pstate); |
| intel_cpufreq_trace(cpu, INTEL_PSTATE_TRACE_FAST_SWITCH, old_pstate); |
| return target_pstate * cpu->pstate.scaling; |
| } |
| |
| static int intel_cpufreq_cpu_init(struct cpufreq_policy *policy) |
| { |
| int ret = __intel_pstate_cpu_init(policy); |
| |
| if (ret) |
| return ret; |
| |
| policy->cpuinfo.transition_latency = INTEL_CPUFREQ_TRANSITION_LATENCY; |
| policy->transition_delay_us = INTEL_CPUFREQ_TRANSITION_DELAY; |
| /* This reflects the intel_pstate_get_cpu_pstates() setting. */ |
| policy->cur = policy->cpuinfo.min_freq; |
| |
| return 0; |
| } |
| |
| static struct cpufreq_driver intel_cpufreq = { |
| .flags = CPUFREQ_CONST_LOOPS, |
| .verify = intel_cpufreq_verify_policy, |
| .target = intel_cpufreq_target, |
| .fast_switch = intel_cpufreq_fast_switch, |
| .init = intel_cpufreq_cpu_init, |
| .exit = intel_pstate_cpu_exit, |
| .stop_cpu = intel_cpufreq_stop_cpu, |
| .update_limits = intel_pstate_update_limits, |
| .name = "intel_cpufreq", |
| }; |
| |
| static struct cpufreq_driver *default_driver = &intel_pstate; |
| |
| static void intel_pstate_driver_cleanup(void) |
| { |
| unsigned int cpu; |
| |
| get_online_cpus(); |
| for_each_online_cpu(cpu) { |
| if (all_cpu_data[cpu]) { |
| if (intel_pstate_driver == &intel_pstate) |
| intel_pstate_clear_update_util_hook(cpu); |
| |
| kfree(all_cpu_data[cpu]); |
| all_cpu_data[cpu] = NULL; |
| } |
| } |
| put_online_cpus(); |
| intel_pstate_driver = NULL; |
| } |
| |
| static int intel_pstate_register_driver(struct cpufreq_driver *driver) |
| { |
| int ret; |
| |
| memset(&global, 0, sizeof(global)); |
| global.max_perf_pct = 100; |
| |
| intel_pstate_driver = driver; |
| ret = cpufreq_register_driver(intel_pstate_driver); |
| if (ret) { |
| intel_pstate_driver_cleanup(); |
| return ret; |
| } |
| |
| global.min_perf_pct = min_perf_pct_min(); |
| |
| return 0; |
| } |
| |
| static int intel_pstate_unregister_driver(void) |
| { |
| if (hwp_active) |
| return -EBUSY; |
| |
| cpufreq_unregister_driver(intel_pstate_driver); |
| intel_pstate_driver_cleanup(); |
| |
| return 0; |
| } |
| |
| static ssize_t intel_pstate_show_status(char *buf) |
| { |
| if (!intel_pstate_driver) |
| return sprintf(buf, "off\n"); |
| |
| return sprintf(buf, "%s\n", intel_pstate_driver == &intel_pstate ? |
| "active" : "passive"); |
| } |
| |
| static int intel_pstate_update_status(const char *buf, size_t size) |
| { |
| int ret; |
| |
| if (size == 3 && !strncmp(buf, "off", size)) |
| return intel_pstate_driver ? |
| intel_pstate_unregister_driver() : -EINVAL; |
| |
| if (size == 6 && !strncmp(buf, "active", size)) { |
| if (intel_pstate_driver) { |
| if (intel_pstate_driver == &intel_pstate) |
| return 0; |
| |
| ret = intel_pstate_unregister_driver(); |
| if (ret) |
| return ret; |
| } |
| |
| return intel_pstate_register_driver(&intel_pstate); |
| } |
| |
| if (size == 7 && !strncmp(buf, "passive", size)) { |
| if (intel_pstate_driver) { |
| if (intel_pstate_driver == &intel_cpufreq) |
| return 0; |
| |
| ret = intel_pstate_unregister_driver(); |
| if (ret) |
| return ret; |
| } |
| |
| return intel_pstate_register_driver(&intel_cpufreq); |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int no_load __initdata; |
| static int no_hwp __initdata; |
| static int hwp_only __initdata; |
| static unsigned int force_load __initdata; |
| |
| static int __init intel_pstate_msrs_not_valid(void) |
| { |
| if (!pstate_funcs.get_max() || |
| !pstate_funcs.get_min() || |
| !pstate_funcs.get_turbo()) |
| return -ENODEV; |
| |
| return 0; |
| } |
| |
| static void __init copy_cpu_funcs(struct pstate_funcs *funcs) |
| { |
| pstate_funcs.get_max = funcs->get_max; |
| pstate_funcs.get_max_physical = funcs->get_max_physical; |
| pstate_funcs.get_min = funcs->get_min; |
| pstate_funcs.get_turbo = funcs->get_turbo; |
| pstate_funcs.get_scaling = funcs->get_scaling; |
| pstate_funcs.get_val = funcs->get_val; |
| pstate_funcs.get_vid = funcs->get_vid; |
| pstate_funcs.get_aperf_mperf_shift = funcs->get_aperf_mperf_shift; |
| } |
| |
| #ifdef CONFIG_ACPI |
| |
| static bool __init intel_pstate_no_acpi_pss(void) |
| { |
| int i; |
| |
| for_each_possible_cpu(i) { |
| acpi_status status; |
| union acpi_object *pss; |
| struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; |
| struct acpi_processor *pr = per_cpu(processors, i); |
| |
| if (!pr) |
| continue; |
| |
| status = acpi_evaluate_object(pr->handle, "_PSS", NULL, &buffer); |
| if (ACPI_FAILURE(status)) |
| continue; |
| |
| pss = buffer.pointer; |
| if (pss && pss->type == ACPI_TYPE_PACKAGE) { |
| kfree(pss); |
| return false; |
| } |
| |
| kfree(pss); |
| } |
| |
| pr_debug("ACPI _PSS not found\n"); |
| return true; |
| } |
| |
| static bool __init intel_pstate_no_acpi_pcch(void) |
| { |
| acpi_status status; |
| acpi_handle handle; |
| |
| status = acpi_get_handle(NULL, "\\_SB", &handle); |
| if (ACPI_FAILURE(status)) |
| goto not_found; |
| |
| if (acpi_has_method(handle, "PCCH")) |
| return false; |
| |
| not_found: |
| pr_debug("ACPI PCCH not found\n"); |
| return true; |
| } |
| |
| static bool __init intel_pstate_has_acpi_ppc(void) |
| { |
| int i; |
| |
| for_each_possible_cpu(i) { |
| struct acpi_processor *pr = per_cpu(processors, i); |
| |
| if (!pr) |
| continue; |
| if (acpi_has_method(pr->handle, "_PPC")) |
| return true; |
| } |
| pr_debug("ACPI _PPC not found\n"); |
| return false; |
| } |
| |
| enum { |
| PSS, |
| PPC, |
| }; |
| |
| /* Hardware vendor-specific info that has its own power management modes */ |
| static struct acpi_platform_list plat_info[] __initdata = { |
| {"HP ", "ProLiant", 0, ACPI_SIG_FADT, all_versions, 0, PSS}, |
| {"ORACLE", "X4-2 ", 0, ACPI_SIG_FADT, all_versions, 0, PPC}, |
| {"ORACLE", "X4-2L ", 0, ACPI_SIG_FADT, all_versions, 0, PPC}, |
| {"ORACLE", "X4-2B ", 0, ACPI_SIG_FADT, all_versions, 0, PPC}, |
| {"ORACLE", "X3-2 ", 0, ACPI_SIG_FADT, all_versions, 0, PPC}, |
| {"ORACLE", "X3-2L ", 0, ACPI_SIG_FADT, all_versions, 0, PPC}, |
| {"ORACLE", "X3-2B ", 0, ACPI_SIG_FADT, all_versions, 0, PPC}, |
| {"ORACLE", "X4470M2 ", 0, ACPI_SIG_FADT, all_versions, 0, PPC}, |
| {"ORACLE", "X4270M3 ", 0, ACPI_SIG_FADT, all_versions, 0, PPC}, |
| {"ORACLE", "X4270M2 ", 0, ACPI_SIG_FADT, all_versions, 0, PPC}, |
| {"ORACLE", "X4170M2 ", 0, ACPI_SIG_FADT, all_versions, 0, PPC}, |
| {"ORACLE", "X4170 M3", 0, ACPI_SIG_FADT, all_versions, 0, PPC}, |
| {"ORACLE", "X4275 M3", 0, ACPI_SIG_FADT, all_versions, 0, PPC}, |
| {"ORACLE", "X6-2 ", 0, ACPI_SIG_FADT, all_versions, 0, PPC}, |
| {"ORACLE", "Sudbury ", 0, ACPI_SIG_FADT, all_versions, 0, PPC}, |
| { } /* End */ |
| }; |
| |
| static bool __init intel_pstate_platform_pwr_mgmt_exists(void) |
| { |
| const struct x86_cpu_id *id; |
| u64 misc_pwr; |
| int idx; |
| |
| id = x86_match_cpu(intel_pstate_cpu_oob_ids); |
| if (id) { |
| rdmsrl(MSR_MISC_PWR_MGMT, misc_pwr); |
| if (misc_pwr & (1 << 8)) { |
| pr_debug("Bit 8 in the MISC_PWR_MGMT MSR set\n"); |
| return true; |
| } |
| } |
| |
| idx = acpi_match_platform_list(plat_info); |
| if (idx < 0) |
| return false; |
| |
| switch (plat_info[idx].data) { |
| case PSS: |
| if (!intel_pstate_no_acpi_pss()) |
| return false; |
| |
| return intel_pstate_no_acpi_pcch(); |
| case PPC: |
| return intel_pstate_has_acpi_ppc() && !force_load; |
| } |
| |
| return false; |
| } |
| |
| static void intel_pstate_request_control_from_smm(void) |
| { |
| /* |
| * It may be unsafe to request P-states control from SMM if _PPC support |
| * has not been enabled. |
| */ |
| if (acpi_ppc) |
| acpi_processor_pstate_control(); |
| } |
| #else /* CONFIG_ACPI not enabled */ |
| static inline bool intel_pstate_platform_pwr_mgmt_exists(void) { return false; } |
| static inline bool intel_pstate_has_acpi_ppc(void) { return false; } |
| static inline void intel_pstate_request_control_from_smm(void) {} |
| #endif /* CONFIG_ACPI */ |
| |
| #define INTEL_PSTATE_HWP_BROADWELL 0x01 |
| |
| #define ICPU_HWP(model, hwp_mode) \ |
| { X86_VENDOR_INTEL, 6, model, X86_FEATURE_HWP, hwp_mode } |
| |
| static const struct x86_cpu_id hwp_support_ids[] __initconst = { |
| ICPU_HWP(INTEL_FAM6_BROADWELL_X, INTEL_PSTATE_HWP_BROADWELL), |
| ICPU_HWP(INTEL_FAM6_BROADWELL_XEON_D, INTEL_PSTATE_HWP_BROADWELL), |
| ICPU_HWP(X86_MODEL_ANY, 0), |
| {} |
| }; |
| |
| static int __init intel_pstate_init(void) |
| { |
| const struct x86_cpu_id *id; |
| int rc; |
| |
| if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) |
| return -ENODEV; |
| |
| if (no_load) |
| return -ENODEV; |
| |
| id = x86_match_cpu(hwp_support_ids); |
| if (id) { |
| copy_cpu_funcs(&core_funcs); |
| if (!no_hwp) { |
| hwp_active++; |
| hwp_mode_bdw = id->driver_data; |
| intel_pstate.attr = hwp_cpufreq_attrs; |
| goto hwp_cpu_matched; |
| } |
| } else { |
| id = x86_match_cpu(intel_pstate_cpu_ids); |
| if (!id) { |
| pr_info("CPU model not supported\n"); |
| return -ENODEV; |
| } |
| |
| copy_cpu_funcs((struct pstate_funcs *)id->driver_data); |
| } |
| |
| if (intel_pstate_msrs_not_valid()) { |
| pr_info("Invalid MSRs\n"); |
| return -ENODEV; |
| } |
| |
| hwp_cpu_matched: |
| /* |
| * The Intel pstate driver will be ignored if the platform |
| * firmware has its own power management modes. |
| */ |
| if (intel_pstate_platform_pwr_mgmt_exists()) { |
| pr_info("P-states controlled by the platform\n"); |
| return -ENODEV; |
| } |
| |
| if (!hwp_active && hwp_only) |
| return -ENOTSUPP; |
| |
| pr_info("Intel P-state driver initializing\n"); |
| |
| all_cpu_data = vzalloc(array_size(sizeof(void *), num_possible_cpus())); |
| if (!all_cpu_data) |
| return -ENOMEM; |
| |
| intel_pstate_request_control_from_smm(); |
| |
| intel_pstate_sysfs_expose_params(); |
| |
| mutex_lock(&intel_pstate_driver_lock); |
| rc = intel_pstate_register_driver(default_driver); |
| mutex_unlock(&intel_pstate_driver_lock); |
| if (rc) |
| return rc; |
| |
| if (hwp_active) |
| pr_info("HWP enabled\n"); |
| |
| return 0; |
| } |
| device_initcall(intel_pstate_init); |
| |
| static int __init intel_pstate_setup(char *str) |
| { |
| if (!str) |
| return -EINVAL; |
| |
| if (!strcmp(str, "disable")) { |
| no_load = 1; |
| } else if (!strcmp(str, "passive")) { |
| pr_info("Passive mode enabled\n"); |
| default_driver = &intel_cpufreq; |
| no_hwp = 1; |
| } |
| if (!strcmp(str, "no_hwp")) { |
| pr_info("HWP disabled\n"); |
| no_hwp = 1; |
| } |
| if (!strcmp(str, "force")) |
| force_load = 1; |
| if (!strcmp(str, "hwp_only")) |
| hwp_only = 1; |
| if (!strcmp(str, "per_cpu_perf_limits")) |
| per_cpu_limits = true; |
| |
| #ifdef CONFIG_ACPI |
| if (!strcmp(str, "support_acpi_ppc")) |
| acpi_ppc = true; |
| #endif |
| |
| return 0; |
| } |
| early_param("intel_pstate", intel_pstate_setup); |
| |
| MODULE_AUTHOR("Dirk Brandewie <dirk.j.brandewie@intel.com>"); |
| MODULE_DESCRIPTION("'intel_pstate' - P state driver Intel Core processors"); |
| MODULE_LICENSE("GPL"); |