Google Git
Sign in
android-kvm / linux / 83ef4a378e563d085ddd7214c2a393116b5f3435 / . / Documentation / iio / adis16480.rst
blob: bc78fa04d958adcf05a23c63d25ede8ae4a2258b [file] [log] [blame]
.. SPDX-License-Identifier: GPL-2.0
================
ADIS16480 driver
================
This driver supports Analog Device's IMUs on SPI bus.
1. Supported devices
====================
* `ADIS16375 <https://www.analog.com/ADIS16375>`_
* `ADIS16480 <https://www.analog.com/ADIS16480>`_
* `ADIS16485 <https://www.analog.com/ADIS16485>`_
* `ADIS16488 <https://www.analog.com/ADIS16488>`_
* `ADIS16490 <https://www.analog.com/ADIS16490>`_
* `ADIS16495 <https://www.analog.com/ADIS16495>`_
* `ADIS16497 <https://www.analog.com/ADIS16497>`_
* `ADIS16545 <https://www.analog.com/ADIS16545>`_
* `ADIS16547 <https://www.analog.com/ADIS16547>`_
Each supported device is a complete inertial system that includes a triaxial
gyroscope and a triaxial accelerometer. Each inertial sensor in device combines
with signal conditioning that optimizes dynamic performance. The factory
calibration characterizes each sensor for sensitivity, bias, and alignment. As
a result, each sensor has its own dynamic compensation formulas that provide
accurate sensor measurements.
2. Device attributes
====================
Accelerometer, gyroscope measurements are always provided. Furthermore, the
driver offers the capability to retrieve the delta angle and the delta velocity
measurements computed by the device.
The delta angle measurements represent a calculation of angular displacement
between each sample update, while the delta velocity measurements represent a
calculation of linear velocity change between each sample update.
Finally, temperature data are provided which show a coarse measurement of
the temperature inside of the IMU device. This data is most useful for
monitoring relative changes in the thermal environment.
ADIS16480 and ADIS16488 also provide access to barometric pressure data and
triaxial magnetometer measurements.
Each IIO device, has a device folder under ``/sys/bus/iio/devices/iio:deviceX``,
where X is the IIO index of the device. Under these folders reside a set of
device files, depending on the characteristics and features of the hardware
device in questions. These files are consistently generalized and documented in
the IIO ABI documentation.
The following tables show the adis16480 related device files, found in the
specific device folder path ``/sys/bus/iio/devices/iio:deviceX``.
**Available only for ADIS16480 and ADIS16488:**
+------------------------------------------+---------------------------------------------------------+
| 3-Axis Magnetometer related device files | Description |
+------------------------------------------+---------------------------------------------------------+
| in_magn_scale | Scale for the magnetometer channels. |
+------------------------------------------+---------------------------------------------------------+
| in_magn_x_calibbias | Calibration offset for the X-axis magnetometer channel. |
+------------------------------------------+---------------------------------------------------------+
| in_magn_x_filter_low_pass_3db_frequency | Bandwidth for the X-axis magnetometer channel. |
+------------------------------------------+---------------------------------------------------------+
| in_magn_x_raw | Raw X-axis magnetometer channel value. |
+------------------------------------------+---------------------------------------------------------+
| in_magn_y_calibbias | Calibration offset for the Y-axis magnetometer channel. |
+------------------------------------------+---------------------------------------------------------+
| in_magn_y_filter_low_pass_3db_frequency | Bandwidth for the Y-axis magnetometer channel. |
+------------------------------------------+---------------------------------------------------------+
| in_magn_y_raw | Raw Y-axis magnetometer channel value. |
+------------------------------------------+---------------------------------------------------------+
| in_magn_z_calibbias | Calibration offset for the Z-axis magnetometer channel. |
+------------------------------------------+---------------------------------------------------------+
| in_magn_z_filter_low_pass_3db_frequency | Bandwidth for the Z-axis magnetometer channel. |
+------------------------------------------+---------------------------------------------------------+
| in_magn_z_raw | Raw Z-axis magnetometer channel value. |
+------------------------------------------+---------------------------------------------------------+
+------------------------------------------+-----------------------------------------------------+
| Barometric pressure sensor related files | Description |
+------------------------------------------+-----------------------------------------------------+
| in_pressure0_calibbias | Calibration offset for barometric pressure channel. |
+------------------------------------------+-----------------------------------------------------+
| in_pressure0_raw | Raw barometric pressure channel value. |
+------------------------------------------+-----------------------------------------------------+
| in_pressure0_scale | Scale for the barometric pressure sensor channel. |
+------------------------------------------+-----------------------------------------------------+
**Available for all supported devices:**
+-------------------------------------------+----------------------------------------------------------+
| 3-Axis Accelerometer related device files | Description |
+-------------------------------------------+----------------------------------------------------------+
| in_accel_scale | Scale for the accelerometer channels. |
+-------------------------------------------+----------------------------------------------------------+
| in_accel_x_calibbias | Calibration offset for the X-axis accelerometer channel. |
+-------------------------------------------+----------------------------------------------------------+
| in_accel_x_calibscale | Calibration scale for the X-axis accelerometer channel. |
+-------------------------------------------+----------------------------------------------------------+
| in_accel_x_filter_low_pass_3db_frequency | Bandwidth for the X-axis accelerometer channel. |
+-------------------------------------------+----------------------------------------------------------+
| in_accel_x_raw | Raw X-axis accelerometer channel value. |
+-------------------------------------------+----------------------------------------------------------+
| in_accel_y_calibbias | Calibration offset for the Y-axis accelerometer channel. |
+-------------------------------------------+----------------------------------------------------------+
| in_accel_y_calibscale | Calibration scale for the Y-axis accelerometer channel. |
+-------------------------------------------+----------------------------------------------------------+
| in_accel_y_filter_low_pass_3db_frequency | Bandwidth for the Y-axis accelerometer channel. |
+-------------------------------------------+----------------------------------------------------------+
| in_accel_y_raw | Raw Y-axis accelerometer channel value. |
+-------------------------------------------+----------------------------------------------------------+
| in_accel_z_calibbias | Calibration offset for the Z-axis accelerometer channel. |
+-------------------------------------------+----------------------------------------------------------+
| in_accel_z_calibscale | Calibration scale for the Z-axis accelerometer channel. |
+-------------------------------------------+----------------------------------------------------------+
| in_accel_z_filter_low_pass_3db_frequency | Bandwidth for the Z-axis accelerometer channel. |
+-------------------------------------------+----------------------------------------------------------+
| in_accel_z_raw | Raw Z-axis accelerometer channel value. |
+-------------------------------------------+----------------------------------------------------------+
| in_deltavelocity_scale | Scale for delta velocity channels. |
+-------------------------------------------+----------------------------------------------------------+
| in_deltavelocity_x_raw | Raw X-axis delta velocity channel value. |
+-------------------------------------------+----------------------------------------------------------+
| in_deltavelocity_y_raw | Raw Y-axis delta velocity channel value. |
+-------------------------------------------+----------------------------------------------------------+
| in_deltavelocity_z_raw | Raw Z-axis delta velocity channel value. |
+-------------------------------------------+----------------------------------------------------------+
+--------------------------------------------+------------------------------------------------------+
| 3-Axis Gyroscope related device files | Description |
+--------------------------------------------+------------------------------------------------------+
| in_anglvel_scale | Scale for the gyroscope channels. |
+--------------------------------------------+------------------------------------------------------+
| in_anglvel_x_calibbias | Calibration offset for the X-axis gyroscope channel. |
+--------------------------------------------+------------------------------------------------------+
| in_anglvel_x_calibscale | Calibration scale for the X-axis gyroscope channel. |
+--------------------------------------------+------------------------------------------------------+
| in_anglvel_x_filter_low_pass_3db_frequency | Bandwidth for the X-axis gyroscope channel. |
+--------------------------------------------+------------------------------------------------------+
| in_anglvel_x_raw | Raw X-axis gyroscope channel value. |
+--------------------------------------------+------------------------------------------------------+
| in_anglvel_y_calibbias | Calibration offset for the Y-axis gyroscope channel. |
+--------------------------------------------+------------------------------------------------------+
| in_anglvel_y_calibscale | Calibration scale for the Y-axis gyroscope channel. |
+--------------------------------------------+------------------------------------------------------+
| in_anglvel_y_filter_low_pass_3db_frequency | Bandwidth for the Y-axis gyroscope channel. |
+--------------------------------------------+------------------------------------------------------+
| in_anglvel_y_raw | Raw Y-axis gyroscope channel value. |
+--------------------------------------------+------------------------------------------------------+
| in_anglvel_z_calibbias | Calibration offset for the Z-axis gyroscope channel. |
+--------------------------------------------+------------------------------------------------------+
| in_anglvel_z_calibscale | Calibration scale for the Z-axis gyroscope channel. |
+--------------------------------------------+------------------------------------------------------+
| in_anglvel_z_filter_low_pass_3db_frequency | Bandwidth for the Z-axis gyroscope channel. |
+--------------------------------------------+------------------------------------------------------+
| in_anglvel_z_raw | Raw Z-axis gyroscope channel value. |
+--------------------------------------------+------------------------------------------------------+
| in_deltaangl_scale | Scale for delta angle channels. |
+--------------------------------------------+------------------------------------------------------+
| in_deltaangl_x_raw | Raw X-axis delta angle channel value. |
+--------------------------------------------+------------------------------------------------------+
| in_deltaangl_y_raw | Raw Y-axis delta angle channel value. |
+--------------------------------------------+------------------------------------------------------+
| in_deltaangl_z_raw | Raw Z-axis delta angle channel value. |
+--------------------------------------------+------------------------------------------------------+
+----------------------------------+-------------------------------------------+
| Temperature sensor related files | Description |
+----------------------------------+-------------------------------------------+
| in_temp0_raw | Raw temperature channel value. |
+----------------------------------+-------------------------------------------+
| in_temp0_offset | Offset for the temperature sensor channel.|
+----------------------------------+-------------------------------------------+
| in_temp0_scale | Scale for the temperature sensor channel. |
+----------------------------------+-------------------------------------------+
+-------------------------------+---------------------------------------------------------+
| Miscellaneous device files | Description |
+-------------------------------+---------------------------------------------------------+
| name | Name of the IIO device. |
+-------------------------------+---------------------------------------------------------+
| sampling_frequency | Currently selected sample rate. |
+-------------------------------+---------------------------------------------------------+
The following table shows the adis16480 related device debug files, found in the
specific device debug folder path ``/sys/kernel/debug/iio/iio:deviceX``.
+----------------------+-------------------------------------------------------------------------+
| Debugfs device files | Description |
+----------------------+-------------------------------------------------------------------------+
| serial_number | The serial number of the chip in hexadecimal format. |
+----------------------+-------------------------------------------------------------------------+
| product_id | Chip specific product id (e.g. 16480, 16488, 16545, etc.). |
+----------------------+-------------------------------------------------------------------------+
| flash_count | The number of flash writes performed on the device. |
+----------------------+-------------------------------------------------------------------------+
| firmware_revision | String containing the firmware revision in the following format ##.##. |
+----------------------+-------------------------------------------------------------------------+
| firmware_date | String containing the firmware date in the following format mm-dd-yyyy. |
+----------------------+-------------------------------------------------------------------------+
Channels processed values
-------------------------
A channel value can be read from its _raw attribute. The value returned is the
raw value as reported by the devices. To get the processed value of the channel,
apply the following formula:
.. code-block:: bash
processed value = (_raw + _offset) * _scale
Where _offset and _scale are device attributes. If no _offset attribute is
present, simply assume its value is 0.
The adis16480 driver offers data for 7 types of channels, the table below shows
the measurement units for the processed value, which are defined by the IIO
framework:
+--------------------------------------+---------------------------+
| Channel type | Measurement unit |
+--------------------------------------+---------------------------+
| Acceleration on X, Y, and Z axis | Meters per Second squared |
+--------------------------------------+---------------------------+
| Angular velocity on X, Y and Z axis | Radians per second |
+--------------------------------------+---------------------------+
| Delta velocity on X. Y, and Z axis | Meters per Second |
+--------------------------------------+---------------------------+
| Delta angle on X, Y, and Z axis | Radians |
+--------------------------------------+---------------------------+
| Temperature | Millidegrees Celsius |
+--------------------------------------+---------------------------+
| Magnetic field along X, Y and Z axis | Gauss |
+--------------------------------------+---------------------------+
| Barometric pressure | kilo Pascal |
+--------------------------------------+---------------------------+
Usage examples
--------------
Show device name:
.. code-block:: bash
root:/sys/bus/iio/devices/iio:device0> cat name
adis16545-1
Show accelerometer channels value:
.. code-block:: bash
root:/sys/bus/iio/devices/iio:device0> cat in_accel_x_raw
1376728
root:/sys/bus/iio/devices/iio:device0> cat in_accel_y_raw
4487621
root:/sys/bus/iio/devices/iio:device0> cat in_accel_z_raw
262773792
root:/sys/bus/iio/devices/iio:device0> cat in_accel_scale
0.000000037
- X-axis acceleration = in_accel_x_raw * in_accel_scale = 0.050938936 m/s^2
- Y-axis acceleration = in_accel_y_raw * in_accel_scale = 0.166041977 m/s^2
- Z-axis acceleration = in_accel_z_raw * in_accel_scale = 9.722630304 m/s^2
Show gyroscope channels value:
.. code-block:: bash
root:/sys/bus/iio/devices/iio:device0> cat in_anglvel_x_raw
-1041702
root:/sys/bus/iio/devices/iio:device0> cat in_anglvel_y_raw
-273013
root:/sys/bus/iio/devices/iio:device0> cat in_anglvel_z_raw
2745116
root:/sys/bus/iio/devices/iio:device0> cat in_anglvel_scale
0.000000001
- X-axis angular velocity = in_anglvel_x_raw * in_anglvel_scale = −0.001041702 rad/s
- Y-axis angular velocity = in_anglvel_y_raw * in_anglvel_scale = −0.000273013 rad/s
- Z-axis angular velocity = in_anglvel_z_raw * in_anglvel_scale = 0.002745116 rad/s
Set calibration offset for accelerometer channels:
.. code-block:: bash
root:/sys/bus/iio/devices/iio:device0> cat in_accel_x_calibbias
0
root:/sys/bus/iio/devices/iio:device0> echo 5000 > in_accel_x_calibbias
root:/sys/bus/iio/devices/iio:device0> cat in_accel_x_calibbias
5000
Set calibration offset for gyroscope channels:
.. code-block:: bash
root:/sys/bus/iio/devices/iio:device0> cat in_anglvel_y_calibbias
0
root:/sys/bus/iio/devices/iio:device0> echo -5000 > in_anglvel_y_calibbias
root:/sys/bus/iio/devices/iio:device0> cat in_anglvel_y_calibbias
-5000
Set sampling frequency:
.. code-block:: bash
root:/sys/bus/iio/devices/iio:device0> cat sampling_frequency
4250.000000
root:/sys/bus/iio/devices/iio:device0> echo 1000 > sampling_frequency
1062.500000
Set bandwidth for accelerometer channels:
.. code-block:: bash
root:/sys/bus/iio/devices/iio:device0> cat in_accel_x_filter_low_pass_3db_frequency
0
root:/sys/bus/iio/devices/iio:device0> echo 300 > in_accel_x_filter_low_pass_3db_frequency
root:/sys/bus/iio/devices/iio:device0> cat in_accel_x_filter_low_pass_3db_frequency
300
Show serial number:
.. code-block:: bash
root:/sys/kernel/debug/iio/iio:device0> cat serial_number
0x000c
Show product id:
.. code-block:: bash
root:/sys/kernel/debug/iio/iio:device0> cat product_id
16545
Show flash count:
.. code-block:: bash
root:/sys/kernel/debug/iio/iio:device0> cat flash_count
88
Show firmware revision:
.. code-block:: bash
root:/sys/kernel/debug/iio/iio:device0> cat firmware_revision
1.4
Show firmware date:
.. code-block:: bash
root:/sys/kernel/debug/iio/iio:device0> cat firmware_date
09-23-2023
3. Device buffers
=================
This driver supports IIO buffers.
All devices support retrieving the raw acceleration, gyroscope and temperature
measurements using buffers.
The following device families also support retrieving the delta velocity, delta
angle and temperature measurements using buffers:
- ADIS16545
- ADIS16547
However, when retrieving acceleration or gyroscope data using buffers, delta
readings will not be available and vice versa. This is because the device only
allows to read either acceleration and gyroscope data or delta velocity and
delta angle data at a time and switching between these two burst data selection
modes is time consuming.
Usage examples
--------------
Set device trigger in current_trigger, if not already set:
.. code-block:: bash
root:/sys/bus/iio/devices/iio:device0> cat trigger/current_trigger
root:/sys/bus/iio/devices/iio:device0> echo adis16545-1-dev0 > trigger/current_trigger
root:/sys/bus/iio/devices/iio:device0> cat trigger/current_trigger
adis16545-1-dev0
Select channels for buffer read:
.. code-block:: bash
root:/sys/bus/iio/devices/iio:device0> echo 1 > scan_elements/in_deltavelocity_x_en
root:/sys/bus/iio/devices/iio:device0> echo 1 > scan_elements/in_deltavelocity_y_en
root:/sys/bus/iio/devices/iio:device0> echo 1 > scan_elements/in_deltavelocity_z_en
root:/sys/bus/iio/devices/iio:device0> echo 1 > scan_elements/in_temp0_en
Set the number of samples to be stored in the buffer:
.. code-block:: bash
root:/sys/bus/iio/devices/iio:device0> echo 10 > buffer/length
Enable buffer readings:
.. code-block:: bash
root:/sys/bus/iio/devices/iio:device0> echo 1 > buffer/enable
Obtain buffered data::
root:/sys/bus/iio/devices/iio:device0> hexdump -C /dev/iio\:device0
...
00006aa0 09 62 00 00 ff ff fc a4 00 00 01 69 00 03 3c 08 |.b.........i..<.|
00006ab0 09 61 00 00 00 00 02 96 00 00 02 8f 00 03 37 50 |.a............7P|
00006ac0 09 61 00 00 00 00 12 3d 00 00 0b 89 00 03 2c 0b |.a.....=......,.|
00006ad0 09 61 00 00 00 00 1e dc 00 00 16 dd 00 03 25 bf |.a............%.|
00006ae0 09 61 00 00 00 00 1e e3 00 00 1b bf 00 03 27 0b |.a............'.|
00006af0 09 61 00 00 00 00 15 50 00 00 19 44 00 03 30 fd |.a.....P...D..0.|
00006b00 09 61 00 00 00 00 09 0e 00 00 14 41 00 03 3d 7f |.a.........A..=.|
00006b10 09 61 00 00 ff ff ff f0 00 00 0e bc 00 03 48 d0 |.a............H.|
00006b20 09 63 00 00 00 00 00 9f 00 00 0f 37 00 03 4c fe |.c.........7..L.|
00006b30 09 64 00 00 00 00 0b f6 00 00 18 92 00 03 43 22 |.d............C"|
00006b40 09 64 00 00 00 00 18 df 00 00 22 33 00 03 33 ab |.d........"3..3.|
00006b50 09 63 00 00 00 00 1e 81 00 00 26 be 00 03 29 60 |.c........&...)`|
00006b60 09 63 00 00 00 00 1b 13 00 00 22 2f 00 03 23 91 |.c........"/..#.|
...
See ``Documentation/iio/iio_devbuf.rst`` for more information about how buffered
data is structured.
4. IIO Interfacing Tools
========================
See ``Documentation/iio/iio_tools.rst`` for the description of the available IIO
interfacing tools.