| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Synopsys AXS10X SDP Generic PLL clock driver |
| * |
| * Copyright (C) 2017 Synopsys |
| */ |
| |
| #include <linux/platform_device.h> |
| #include <linux/module.h> |
| #include <linux/clk-provider.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/device.h> |
| #include <linux/io.h> |
| #include <linux/of.h> |
| #include <linux/of_address.h> |
| #include <linux/slab.h> |
| |
| /* PLL registers addresses */ |
| #define PLL_REG_IDIV 0x0 |
| #define PLL_REG_FBDIV 0x4 |
| #define PLL_REG_ODIV 0x8 |
| |
| /* |
| * Bit fields of the PLL IDIV/FBDIV/ODIV registers: |
| * ________________________________________________________________________ |
| * |31 15| 14 | 13 | 12 |11 6|5 0| |
| * |-------RESRVED------|-NOUPDATE-|-BYPASS-|-EDGE-|--HIGHTIME--|--LOWTIME--| |
| * |____________________|__________|________|______|____________|___________| |
| * |
| * Following macros determine the way of access to these registers |
| * They should be set up only using the macros. |
| * reg should be an u32 variable. |
| */ |
| |
| #define PLL_REG_GET_LOW(reg) \ |
| (((reg) & (0x3F << 0)) >> 0) |
| #define PLL_REG_GET_HIGH(reg) \ |
| (((reg) & (0x3F << 6)) >> 6) |
| #define PLL_REG_GET_EDGE(reg) \ |
| (((reg) & (BIT(12))) ? 1 : 0) |
| #define PLL_REG_GET_BYPASS(reg) \ |
| (((reg) & (BIT(13))) ? 1 : 0) |
| #define PLL_REG_GET_NOUPD(reg) \ |
| (((reg) & (BIT(14))) ? 1 : 0) |
| #define PLL_REG_GET_PAD(reg) \ |
| (((reg) & (0x1FFFF << 15)) >> 15) |
| |
| #define PLL_REG_SET_LOW(reg, value) \ |
| { reg |= (((value) & 0x3F) << 0); } |
| #define PLL_REG_SET_HIGH(reg, value) \ |
| { reg |= (((value) & 0x3F) << 6); } |
| #define PLL_REG_SET_EDGE(reg, value) \ |
| { reg |= (((value) & 0x01) << 12); } |
| #define PLL_REG_SET_BYPASS(reg, value) \ |
| { reg |= (((value) & 0x01) << 13); } |
| #define PLL_REG_SET_NOUPD(reg, value) \ |
| { reg |= (((value) & 0x01) << 14); } |
| #define PLL_REG_SET_PAD(reg, value) \ |
| { reg |= (((value) & 0x1FFFF) << 15); } |
| |
| #define PLL_LOCK BIT(0) |
| #define PLL_ERROR BIT(1) |
| #define PLL_MAX_LOCK_TIME 100 /* 100 us */ |
| |
| struct axs10x_pll_cfg { |
| u32 rate; |
| u32 idiv; |
| u32 fbdiv; |
| u32 odiv; |
| }; |
| |
| static const struct axs10x_pll_cfg arc_pll_cfg[] = { |
| { 33333333, 1, 1, 1 }, |
| { 50000000, 1, 30, 20 }, |
| { 75000000, 2, 45, 10 }, |
| { 90000000, 2, 54, 10 }, |
| { 100000000, 1, 30, 10 }, |
| { 125000000, 2, 45, 6 }, |
| {} |
| }; |
| |
| static const struct axs10x_pll_cfg pgu_pll_cfg[] = { |
| { 25200000, 1, 84, 90 }, |
| { 50000000, 1, 100, 54 }, |
| { 74250000, 1, 44, 16 }, |
| {} |
| }; |
| |
| struct axs10x_pll_clk { |
| struct clk_hw hw; |
| void __iomem *base; |
| void __iomem *lock; |
| const struct axs10x_pll_cfg *pll_cfg; |
| struct device *dev; |
| }; |
| |
| static inline void axs10x_pll_write(struct axs10x_pll_clk *clk, u32 reg, |
| u32 val) |
| { |
| iowrite32(val, clk->base + reg); |
| } |
| |
| static inline u32 axs10x_pll_read(struct axs10x_pll_clk *clk, u32 reg) |
| { |
| return ioread32(clk->base + reg); |
| } |
| |
| static inline struct axs10x_pll_clk *to_axs10x_pll_clk(struct clk_hw *hw) |
| { |
| return container_of(hw, struct axs10x_pll_clk, hw); |
| } |
| |
| static inline u32 axs10x_div_get_value(u32 reg) |
| { |
| if (PLL_REG_GET_BYPASS(reg)) |
| return 1; |
| |
| return PLL_REG_GET_HIGH(reg) + PLL_REG_GET_LOW(reg); |
| } |
| |
| static inline u32 axs10x_encode_div(unsigned int id, int upd) |
| { |
| u32 div = 0; |
| |
| PLL_REG_SET_LOW(div, (id % 2 == 0) ? id >> 1 : (id >> 1) + 1); |
| PLL_REG_SET_HIGH(div, id >> 1); |
| PLL_REG_SET_EDGE(div, id % 2); |
| PLL_REG_SET_BYPASS(div, id == 1 ? 1 : 0); |
| PLL_REG_SET_NOUPD(div, upd == 0 ? 1 : 0); |
| |
| return div; |
| } |
| |
| static unsigned long axs10x_pll_recalc_rate(struct clk_hw *hw, |
| unsigned long parent_rate) |
| { |
| u64 rate; |
| u32 idiv, fbdiv, odiv; |
| struct axs10x_pll_clk *clk = to_axs10x_pll_clk(hw); |
| |
| idiv = axs10x_div_get_value(axs10x_pll_read(clk, PLL_REG_IDIV)); |
| fbdiv = axs10x_div_get_value(axs10x_pll_read(clk, PLL_REG_FBDIV)); |
| odiv = axs10x_div_get_value(axs10x_pll_read(clk, PLL_REG_ODIV)); |
| |
| rate = (u64)parent_rate * fbdiv; |
| do_div(rate, idiv * odiv); |
| |
| return rate; |
| } |
| |
| static long axs10x_pll_round_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long *prate) |
| { |
| int i; |
| long best_rate; |
| struct axs10x_pll_clk *clk = to_axs10x_pll_clk(hw); |
| const struct axs10x_pll_cfg *pll_cfg = clk->pll_cfg; |
| |
| if (pll_cfg[0].rate == 0) |
| return -EINVAL; |
| |
| best_rate = pll_cfg[0].rate; |
| |
| for (i = 1; pll_cfg[i].rate != 0; i++) { |
| if (abs(rate - pll_cfg[i].rate) < abs(rate - best_rate)) |
| best_rate = pll_cfg[i].rate; |
| } |
| |
| return best_rate; |
| } |
| |
| static int axs10x_pll_set_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long parent_rate) |
| { |
| int i; |
| struct axs10x_pll_clk *clk = to_axs10x_pll_clk(hw); |
| const struct axs10x_pll_cfg *pll_cfg = clk->pll_cfg; |
| |
| for (i = 0; pll_cfg[i].rate != 0; i++) { |
| if (pll_cfg[i].rate == rate) { |
| axs10x_pll_write(clk, PLL_REG_IDIV, |
| axs10x_encode_div(pll_cfg[i].idiv, 0)); |
| axs10x_pll_write(clk, PLL_REG_FBDIV, |
| axs10x_encode_div(pll_cfg[i].fbdiv, 0)); |
| axs10x_pll_write(clk, PLL_REG_ODIV, |
| axs10x_encode_div(pll_cfg[i].odiv, 1)); |
| |
| /* |
| * Wait until CGU relocks and check error status. |
| * If after timeout CGU is unlocked yet return error |
| */ |
| udelay(PLL_MAX_LOCK_TIME); |
| if (!(ioread32(clk->lock) & PLL_LOCK)) |
| return -ETIMEDOUT; |
| |
| if (ioread32(clk->lock) & PLL_ERROR) |
| return -EINVAL; |
| |
| return 0; |
| } |
| } |
| |
| dev_err(clk->dev, "invalid rate=%ld, parent_rate=%ld\n", rate, |
| parent_rate); |
| return -EINVAL; |
| } |
| |
| static const struct clk_ops axs10x_pll_ops = { |
| .recalc_rate = axs10x_pll_recalc_rate, |
| .round_rate = axs10x_pll_round_rate, |
| .set_rate = axs10x_pll_set_rate, |
| }; |
| |
| static int axs10x_pll_clk_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| const char *parent_name; |
| struct axs10x_pll_clk *pll_clk; |
| struct clk_init_data init = { }; |
| int ret; |
| |
| pll_clk = devm_kzalloc(dev, sizeof(*pll_clk), GFP_KERNEL); |
| if (!pll_clk) |
| return -ENOMEM; |
| |
| pll_clk->base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(pll_clk->base)) |
| return PTR_ERR(pll_clk->base); |
| |
| pll_clk->lock = devm_platform_ioremap_resource(pdev, 1); |
| if (IS_ERR(pll_clk->lock)) |
| return PTR_ERR(pll_clk->lock); |
| |
| init.name = dev->of_node->name; |
| init.ops = &axs10x_pll_ops; |
| parent_name = of_clk_get_parent_name(dev->of_node, 0); |
| init.parent_names = &parent_name; |
| init.num_parents = 1; |
| pll_clk->hw.init = &init; |
| pll_clk->dev = dev; |
| pll_clk->pll_cfg = of_device_get_match_data(dev); |
| |
| if (!pll_clk->pll_cfg) { |
| dev_err(dev, "No OF match data provided\n"); |
| return -EINVAL; |
| } |
| |
| ret = devm_clk_hw_register(dev, &pll_clk->hw); |
| if (ret) { |
| dev_err(dev, "failed to register %s clock\n", init.name); |
| return ret; |
| } |
| |
| return devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, |
| &pll_clk->hw); |
| } |
| |
| static void __init of_axs10x_pll_clk_setup(struct device_node *node) |
| { |
| const char *parent_name; |
| struct axs10x_pll_clk *pll_clk; |
| struct clk_init_data init = { }; |
| int ret; |
| |
| pll_clk = kzalloc(sizeof(*pll_clk), GFP_KERNEL); |
| if (!pll_clk) |
| return; |
| |
| pll_clk->base = of_iomap(node, 0); |
| if (!pll_clk->base) { |
| pr_err("failed to map pll div registers\n"); |
| goto err_free_pll_clk; |
| } |
| |
| pll_clk->lock = of_iomap(node, 1); |
| if (!pll_clk->lock) { |
| pr_err("failed to map pll lock register\n"); |
| goto err_unmap_base; |
| } |
| |
| init.name = node->name; |
| init.ops = &axs10x_pll_ops; |
| parent_name = of_clk_get_parent_name(node, 0); |
| init.parent_names = &parent_name; |
| init.num_parents = parent_name ? 1 : 0; |
| pll_clk->hw.init = &init; |
| pll_clk->pll_cfg = arc_pll_cfg; |
| |
| ret = clk_hw_register(NULL, &pll_clk->hw); |
| if (ret) { |
| pr_err("failed to register %pOFn clock\n", node); |
| goto err_unmap_lock; |
| } |
| |
| ret = of_clk_add_hw_provider(node, of_clk_hw_simple_get, &pll_clk->hw); |
| if (ret) { |
| pr_err("failed to add hw provider for %pOFn clock\n", node); |
| goto err_unregister_clk; |
| } |
| |
| return; |
| |
| err_unregister_clk: |
| clk_hw_unregister(&pll_clk->hw); |
| err_unmap_lock: |
| iounmap(pll_clk->lock); |
| err_unmap_base: |
| iounmap(pll_clk->base); |
| err_free_pll_clk: |
| kfree(pll_clk); |
| } |
| CLK_OF_DECLARE(axs10x_pll_clock, "snps,axs10x-arc-pll-clock", |
| of_axs10x_pll_clk_setup); |
| |
| static const struct of_device_id axs10x_pll_clk_id[] = { |
| { .compatible = "snps,axs10x-pgu-pll-clock", .data = &pgu_pll_cfg}, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, axs10x_pll_clk_id); |
| |
| static struct platform_driver axs10x_pll_clk_driver = { |
| .driver = { |
| .name = "axs10x-pll-clock", |
| .of_match_table = axs10x_pll_clk_id, |
| }, |
| .probe = axs10x_pll_clk_probe, |
| }; |
| builtin_platform_driver(axs10x_pll_clk_driver); |
| |
| MODULE_AUTHOR("Vlad Zakharov <vzakhar@synopsys.com>"); |
| MODULE_DESCRIPTION("Synopsys AXS10X SDP Generic PLL Clock Driver"); |
| MODULE_LICENSE("GPL v2"); |