| // SPDX-License-Identifier: GPL-2.0 |
| // ChromeOS Embedded Controller extcon |
| // |
| // Copyright (C) 2017 Google, Inc. |
| // Author: Benson Leung <bleung@chromium.org> |
| |
| #include <linux/extcon-provider.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/notifier.h> |
| #include <linux/of.h> |
| #include <linux/platform_data/cros_ec_commands.h> |
| #include <linux/platform_data/cros_ec_proto.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/sched.h> |
| |
| struct cros_ec_extcon_info { |
| struct device *dev; |
| struct extcon_dev *edev; |
| |
| int port_id; |
| |
| struct cros_ec_device *ec; |
| |
| struct notifier_block notifier; |
| |
| unsigned int dr; /* data role */ |
| bool pr; /* power role (true if VBUS enabled) */ |
| bool dp; /* DisplayPort enabled */ |
| bool mux; /* SuperSpeed (usb3) enabled */ |
| unsigned int power_type; |
| }; |
| |
| static const unsigned int usb_type_c_cable[] = { |
| EXTCON_USB, |
| EXTCON_USB_HOST, |
| EXTCON_DISP_DP, |
| EXTCON_NONE, |
| }; |
| |
| enum usb_data_roles { |
| DR_NONE, |
| DR_HOST, |
| DR_DEVICE, |
| }; |
| |
| /** |
| * cros_ec_pd_command() - Send a command to the EC. |
| * @info: pointer to struct cros_ec_extcon_info |
| * @command: EC command |
| * @version: EC command version |
| * @outdata: EC command output data |
| * @outsize: Size of outdata |
| * @indata: EC command input data |
| * @insize: Size of indata |
| * |
| * Return: 0 on success, <0 on failure. |
| */ |
| static int cros_ec_pd_command(struct cros_ec_extcon_info *info, |
| unsigned int command, |
| unsigned int version, |
| void *outdata, |
| unsigned int outsize, |
| void *indata, |
| unsigned int insize) |
| { |
| struct cros_ec_command *msg; |
| int ret; |
| |
| msg = kzalloc(struct_size(msg, data, max(outsize, insize)), GFP_KERNEL); |
| if (!msg) |
| return -ENOMEM; |
| |
| msg->version = version; |
| msg->command = command; |
| msg->outsize = outsize; |
| msg->insize = insize; |
| |
| if (outsize) |
| memcpy(msg->data, outdata, outsize); |
| |
| ret = cros_ec_cmd_xfer_status(info->ec, msg); |
| if (ret >= 0 && insize) |
| memcpy(indata, msg->data, insize); |
| |
| kfree(msg); |
| return ret; |
| } |
| |
| /** |
| * cros_ec_usb_get_power_type() - Get power type info about PD device attached |
| * to given port. |
| * @info: pointer to struct cros_ec_extcon_info |
| * |
| * Return: power type on success, <0 on failure. |
| */ |
| static int cros_ec_usb_get_power_type(struct cros_ec_extcon_info *info) |
| { |
| struct ec_params_usb_pd_power_info req; |
| struct ec_response_usb_pd_power_info resp; |
| int ret; |
| |
| req.port = info->port_id; |
| ret = cros_ec_pd_command(info, EC_CMD_USB_PD_POWER_INFO, 0, |
| &req, sizeof(req), &resp, sizeof(resp)); |
| if (ret < 0) |
| return ret; |
| |
| return resp.type; |
| } |
| |
| /** |
| * cros_ec_usb_get_pd_mux_state() - Get PD mux state for given port. |
| * @info: pointer to struct cros_ec_extcon_info |
| * |
| * Return: PD mux state on success, <0 on failure. |
| */ |
| static int cros_ec_usb_get_pd_mux_state(struct cros_ec_extcon_info *info) |
| { |
| struct ec_params_usb_pd_mux_info req; |
| struct ec_response_usb_pd_mux_info resp; |
| int ret; |
| |
| req.port = info->port_id; |
| ret = cros_ec_pd_command(info, EC_CMD_USB_PD_MUX_INFO, 0, |
| &req, sizeof(req), |
| &resp, sizeof(resp)); |
| if (ret < 0) |
| return ret; |
| |
| return resp.flags; |
| } |
| |
| /** |
| * cros_ec_usb_get_role() - Get role info about possible PD device attached to a |
| * given port. |
| * @info: pointer to struct cros_ec_extcon_info |
| * @polarity: pointer to cable polarity (return value) |
| * |
| * Return: role info on success, -ENOTCONN if no cable is connected, <0 on |
| * failure. |
| */ |
| static int cros_ec_usb_get_role(struct cros_ec_extcon_info *info, |
| bool *polarity) |
| { |
| struct ec_params_usb_pd_control pd_control; |
| struct ec_response_usb_pd_control_v1 resp; |
| int ret; |
| |
| pd_control.port = info->port_id; |
| pd_control.role = USB_PD_CTRL_ROLE_NO_CHANGE; |
| pd_control.mux = USB_PD_CTRL_MUX_NO_CHANGE; |
| pd_control.swap = USB_PD_CTRL_SWAP_NONE; |
| ret = cros_ec_pd_command(info, EC_CMD_USB_PD_CONTROL, 1, |
| &pd_control, sizeof(pd_control), |
| &resp, sizeof(resp)); |
| if (ret < 0) |
| return ret; |
| |
| if (!(resp.enabled & PD_CTRL_RESP_ENABLED_CONNECTED)) |
| return -ENOTCONN; |
| |
| *polarity = resp.polarity; |
| |
| return resp.role; |
| } |
| |
| /** |
| * cros_ec_pd_get_num_ports() - Get number of EC charge ports. |
| * @info: pointer to struct cros_ec_extcon_info |
| * |
| * Return: number of ports on success, <0 on failure. |
| */ |
| static int cros_ec_pd_get_num_ports(struct cros_ec_extcon_info *info) |
| { |
| struct ec_response_usb_pd_ports resp; |
| int ret; |
| |
| ret = cros_ec_pd_command(info, EC_CMD_USB_PD_PORTS, |
| 0, NULL, 0, &resp, sizeof(resp)); |
| if (ret < 0) |
| return ret; |
| |
| return resp.num_ports; |
| } |
| |
| static const char *cros_ec_usb_role_string(unsigned int role) |
| { |
| return role == DR_NONE ? "DISCONNECTED" : |
| (role == DR_HOST ? "DFP" : "UFP"); |
| } |
| |
| static const char *cros_ec_usb_power_type_string(unsigned int type) |
| { |
| switch (type) { |
| case USB_CHG_TYPE_NONE: |
| return "USB_CHG_TYPE_NONE"; |
| case USB_CHG_TYPE_PD: |
| return "USB_CHG_TYPE_PD"; |
| case USB_CHG_TYPE_PROPRIETARY: |
| return "USB_CHG_TYPE_PROPRIETARY"; |
| case USB_CHG_TYPE_C: |
| return "USB_CHG_TYPE_C"; |
| case USB_CHG_TYPE_BC12_DCP: |
| return "USB_CHG_TYPE_BC12_DCP"; |
| case USB_CHG_TYPE_BC12_CDP: |
| return "USB_CHG_TYPE_BC12_CDP"; |
| case USB_CHG_TYPE_BC12_SDP: |
| return "USB_CHG_TYPE_BC12_SDP"; |
| case USB_CHG_TYPE_OTHER: |
| return "USB_CHG_TYPE_OTHER"; |
| case USB_CHG_TYPE_VBUS: |
| return "USB_CHG_TYPE_VBUS"; |
| case USB_CHG_TYPE_UNKNOWN: |
| return "USB_CHG_TYPE_UNKNOWN"; |
| default: |
| return "USB_CHG_TYPE_UNKNOWN"; |
| } |
| } |
| |
| static bool cros_ec_usb_power_type_is_wall_wart(unsigned int type, |
| unsigned int role) |
| { |
| switch (type) { |
| /* FIXME : Guppy, Donnettes, and other chargers will be miscategorized |
| * because they identify with USB_CHG_TYPE_C, but we can't return true |
| * here from that code because that breaks Suzy-Q and other kinds of |
| * USB Type-C cables and peripherals. |
| */ |
| case USB_CHG_TYPE_PROPRIETARY: |
| case USB_CHG_TYPE_BC12_DCP: |
| return true; |
| case USB_CHG_TYPE_PD: |
| case USB_CHG_TYPE_C: |
| case USB_CHG_TYPE_BC12_CDP: |
| case USB_CHG_TYPE_BC12_SDP: |
| case USB_CHG_TYPE_OTHER: |
| case USB_CHG_TYPE_VBUS: |
| case USB_CHG_TYPE_UNKNOWN: |
| case USB_CHG_TYPE_NONE: |
| default: |
| return false; |
| } |
| } |
| |
| static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info, |
| bool force) |
| { |
| struct device *dev = info->dev; |
| int role, power_type; |
| unsigned int dr = DR_NONE; |
| bool pr = false; |
| bool polarity = false; |
| bool dp = false; |
| bool mux = false; |
| bool hpd = false; |
| |
| power_type = cros_ec_usb_get_power_type(info); |
| if (power_type < 0) { |
| dev_err(dev, "failed getting power type err = %d\n", |
| power_type); |
| return power_type; |
| } |
| |
| role = cros_ec_usb_get_role(info, &polarity); |
| if (role < 0) { |
| if (role != -ENOTCONN) { |
| dev_err(dev, "failed getting role err = %d\n", role); |
| return role; |
| } |
| dev_dbg(dev, "disconnected\n"); |
| } else { |
| int pd_mux_state; |
| |
| dr = (role & PD_CTRL_RESP_ROLE_DATA) ? DR_HOST : DR_DEVICE; |
| pr = (role & PD_CTRL_RESP_ROLE_POWER); |
| pd_mux_state = cros_ec_usb_get_pd_mux_state(info); |
| if (pd_mux_state < 0) |
| pd_mux_state = USB_PD_MUX_USB_ENABLED; |
| |
| dp = pd_mux_state & USB_PD_MUX_DP_ENABLED; |
| mux = pd_mux_state & USB_PD_MUX_USB_ENABLED; |
| hpd = pd_mux_state & USB_PD_MUX_HPD_IRQ; |
| |
| dev_dbg(dev, |
| "connected role 0x%x pwr type %d dr %d pr %d pol %d mux %d dp %d hpd %d\n", |
| role, power_type, dr, pr, polarity, mux, dp, hpd); |
| } |
| |
| /* |
| * When there is no USB host (e.g. USB PD charger), |
| * we are not really a UFP for the AP. |
| */ |
| if (dr == DR_DEVICE && |
| cros_ec_usb_power_type_is_wall_wart(power_type, role)) |
| dr = DR_NONE; |
| |
| if (force || info->dr != dr || info->pr != pr || info->dp != dp || |
| info->mux != mux || info->power_type != power_type) { |
| bool host_connected = false, device_connected = false; |
| |
| dev_dbg(dev, "Type/Role switch! type = %s role = %s\n", |
| cros_ec_usb_power_type_string(power_type), |
| cros_ec_usb_role_string(dr)); |
| info->dr = dr; |
| info->pr = pr; |
| info->dp = dp; |
| info->mux = mux; |
| info->power_type = power_type; |
| |
| if (dr == DR_DEVICE) |
| device_connected = true; |
| else if (dr == DR_HOST) |
| host_connected = true; |
| |
| extcon_set_state(info->edev, EXTCON_USB, device_connected); |
| extcon_set_state(info->edev, EXTCON_USB_HOST, host_connected); |
| extcon_set_state(info->edev, EXTCON_DISP_DP, dp); |
| extcon_set_property(info->edev, EXTCON_USB, |
| EXTCON_PROP_USB_VBUS, |
| (union extcon_property_value)(int)pr); |
| extcon_set_property(info->edev, EXTCON_USB_HOST, |
| EXTCON_PROP_USB_VBUS, |
| (union extcon_property_value)(int)pr); |
| extcon_set_property(info->edev, EXTCON_USB, |
| EXTCON_PROP_USB_TYPEC_POLARITY, |
| (union extcon_property_value)(int)polarity); |
| extcon_set_property(info->edev, EXTCON_USB_HOST, |
| EXTCON_PROP_USB_TYPEC_POLARITY, |
| (union extcon_property_value)(int)polarity); |
| extcon_set_property(info->edev, EXTCON_DISP_DP, |
| EXTCON_PROP_USB_TYPEC_POLARITY, |
| (union extcon_property_value)(int)polarity); |
| extcon_set_property(info->edev, EXTCON_USB, |
| EXTCON_PROP_USB_SS, |
| (union extcon_property_value)(int)mux); |
| extcon_set_property(info->edev, EXTCON_USB_HOST, |
| EXTCON_PROP_USB_SS, |
| (union extcon_property_value)(int)mux); |
| extcon_set_property(info->edev, EXTCON_DISP_DP, |
| EXTCON_PROP_USB_SS, |
| (union extcon_property_value)(int)mux); |
| extcon_set_property(info->edev, EXTCON_DISP_DP, |
| EXTCON_PROP_DISP_HPD, |
| (union extcon_property_value)(int)hpd); |
| |
| extcon_sync(info->edev, EXTCON_USB); |
| extcon_sync(info->edev, EXTCON_USB_HOST); |
| extcon_sync(info->edev, EXTCON_DISP_DP); |
| |
| } else if (hpd) { |
| extcon_set_property(info->edev, EXTCON_DISP_DP, |
| EXTCON_PROP_DISP_HPD, |
| (union extcon_property_value)(int)hpd); |
| extcon_sync(info->edev, EXTCON_DISP_DP); |
| } |
| |
| return 0; |
| } |
| |
| static int extcon_cros_ec_event(struct notifier_block *nb, |
| unsigned long queued_during_suspend, |
| void *_notify) |
| { |
| struct cros_ec_extcon_info *info; |
| struct cros_ec_device *ec; |
| u32 host_event; |
| |
| info = container_of(nb, struct cros_ec_extcon_info, notifier); |
| ec = info->ec; |
| |
| host_event = cros_ec_get_host_event(ec); |
| if (host_event & (EC_HOST_EVENT_MASK(EC_HOST_EVENT_PD_MCU) | |
| EC_HOST_EVENT_MASK(EC_HOST_EVENT_USB_MUX))) { |
| extcon_cros_ec_detect_cable(info, false); |
| return NOTIFY_OK; |
| } |
| |
| return NOTIFY_DONE; |
| } |
| |
| static int extcon_cros_ec_probe(struct platform_device *pdev) |
| { |
| struct cros_ec_extcon_info *info; |
| struct cros_ec_device *ec = dev_get_drvdata(pdev->dev.parent); |
| struct device *dev = &pdev->dev; |
| struct device_node *np = dev->of_node; |
| int numports, ret; |
| |
| info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); |
| if (!info) |
| return -ENOMEM; |
| |
| info->dev = dev; |
| info->ec = ec; |
| |
| if (np) { |
| u32 port; |
| |
| ret = of_property_read_u32(np, "google,usb-port-id", &port); |
| if (ret < 0) { |
| dev_err(dev, "Missing google,usb-port-id property\n"); |
| return ret; |
| } |
| info->port_id = port; |
| } else { |
| info->port_id = pdev->id; |
| } |
| |
| numports = cros_ec_pd_get_num_ports(info); |
| if (numports < 0) { |
| dev_err(dev, "failed getting number of ports! ret = %d\n", |
| numports); |
| return numports; |
| } |
| |
| if (info->port_id >= numports) { |
| dev_err(dev, "This system only supports %d ports\n", numports); |
| return -ENODEV; |
| } |
| |
| info->edev = devm_extcon_dev_allocate(dev, usb_type_c_cable); |
| if (IS_ERR(info->edev)) { |
| dev_err(dev, "failed to allocate extcon device\n"); |
| return -ENOMEM; |
| } |
| |
| ret = devm_extcon_dev_register(dev, info->edev); |
| if (ret < 0) { |
| dev_err(dev, "failed to register extcon device\n"); |
| return ret; |
| } |
| |
| extcon_set_property_capability(info->edev, EXTCON_USB, |
| EXTCON_PROP_USB_VBUS); |
| extcon_set_property_capability(info->edev, EXTCON_USB_HOST, |
| EXTCON_PROP_USB_VBUS); |
| extcon_set_property_capability(info->edev, EXTCON_USB, |
| EXTCON_PROP_USB_TYPEC_POLARITY); |
| extcon_set_property_capability(info->edev, EXTCON_USB_HOST, |
| EXTCON_PROP_USB_TYPEC_POLARITY); |
| extcon_set_property_capability(info->edev, EXTCON_DISP_DP, |
| EXTCON_PROP_USB_TYPEC_POLARITY); |
| extcon_set_property_capability(info->edev, EXTCON_USB, |
| EXTCON_PROP_USB_SS); |
| extcon_set_property_capability(info->edev, EXTCON_USB_HOST, |
| EXTCON_PROP_USB_SS); |
| extcon_set_property_capability(info->edev, EXTCON_DISP_DP, |
| EXTCON_PROP_USB_SS); |
| extcon_set_property_capability(info->edev, EXTCON_DISP_DP, |
| EXTCON_PROP_DISP_HPD); |
| |
| info->dr = DR_NONE; |
| info->pr = false; |
| |
| platform_set_drvdata(pdev, info); |
| |
| /* Get PD events from the EC */ |
| info->notifier.notifier_call = extcon_cros_ec_event; |
| ret = blocking_notifier_chain_register(&info->ec->event_notifier, |
| &info->notifier); |
| if (ret < 0) { |
| dev_err(dev, "failed to register notifier\n"); |
| return ret; |
| } |
| |
| /* Perform initial detection */ |
| ret = extcon_cros_ec_detect_cable(info, true); |
| if (ret < 0) { |
| dev_err(dev, "failed to detect initial cable state\n"); |
| goto unregister_notifier; |
| } |
| |
| return 0; |
| |
| unregister_notifier: |
| blocking_notifier_chain_unregister(&info->ec->event_notifier, |
| &info->notifier); |
| return ret; |
| } |
| |
| static void extcon_cros_ec_remove(struct platform_device *pdev) |
| { |
| struct cros_ec_extcon_info *info = platform_get_drvdata(pdev); |
| |
| blocking_notifier_chain_unregister(&info->ec->event_notifier, |
| &info->notifier); |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int extcon_cros_ec_suspend(struct device *dev) |
| { |
| return 0; |
| } |
| |
| static int extcon_cros_ec_resume(struct device *dev) |
| { |
| int ret; |
| struct cros_ec_extcon_info *info = dev_get_drvdata(dev); |
| |
| ret = extcon_cros_ec_detect_cable(info, true); |
| if (ret < 0) |
| dev_err(dev, "failed to detect cable state on resume\n"); |
| |
| return 0; |
| } |
| |
| static const struct dev_pm_ops extcon_cros_ec_dev_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(extcon_cros_ec_suspend, extcon_cros_ec_resume) |
| }; |
| |
| #define DEV_PM_OPS (&extcon_cros_ec_dev_pm_ops) |
| #else |
| #define DEV_PM_OPS NULL |
| #endif /* CONFIG_PM_SLEEP */ |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id extcon_cros_ec_of_match[] = { |
| { .compatible = "google,extcon-usbc-cros-ec" }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, extcon_cros_ec_of_match); |
| #endif /* CONFIG_OF */ |
| |
| static struct platform_driver extcon_cros_ec_driver = { |
| .driver = { |
| .name = "extcon-usbc-cros-ec", |
| .of_match_table = of_match_ptr(extcon_cros_ec_of_match), |
| .pm = DEV_PM_OPS, |
| }, |
| .remove_new = extcon_cros_ec_remove, |
| .probe = extcon_cros_ec_probe, |
| }; |
| |
| module_platform_driver(extcon_cros_ec_driver); |
| |
| MODULE_DESCRIPTION("ChromeOS Embedded Controller extcon driver"); |
| MODULE_AUTHOR("Benson Leung <bleung@chromium.org>"); |
| MODULE_LICENSE("GPL v2"); |