| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2014-2018 Renesas Electronics Europe Limited |
| * |
| * Phil Edworthy <phil.edworthy@renesas.com> |
| * Based on a driver originally written by Michel Pollet at Renesas. |
| */ |
| |
| #include <dt-bindings/pinctrl/rzn1-pinctrl.h> |
| |
| #include <linux/clk.h> |
| #include <linux/device.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| |
| #include <linux/pinctrl/pinconf-generic.h> |
| #include <linux/pinctrl/pinconf.h> |
| #include <linux/pinctrl/pinctrl.h> |
| #include <linux/pinctrl/pinmux.h> |
| |
| #include "../core.h" |
| #include "../pinconf.h" |
| #include "../pinctrl-utils.h" |
| |
| /* Field positions and masks in the pinmux registers */ |
| #define RZN1_L1_PIN_DRIVE_STRENGTH 10 |
| #define RZN1_L1_PIN_DRIVE_STRENGTH_4MA 0 |
| #define RZN1_L1_PIN_DRIVE_STRENGTH_6MA 1 |
| #define RZN1_L1_PIN_DRIVE_STRENGTH_8MA 2 |
| #define RZN1_L1_PIN_DRIVE_STRENGTH_12MA 3 |
| #define RZN1_L1_PIN_PULL 8 |
| #define RZN1_L1_PIN_PULL_NONE 0 |
| #define RZN1_L1_PIN_PULL_UP 1 |
| #define RZN1_L1_PIN_PULL_DOWN 3 |
| #define RZN1_L1_FUNCTION 0 |
| #define RZN1_L1_FUNC_MASK 0xf |
| #define RZN1_L1_FUNCTION_L2 0xf |
| |
| /* |
| * The hardware manual describes two levels of multiplexing, but it's more |
| * logical to think of the hardware as three levels, with level 3 consisting of |
| * the multiplexing for Ethernet MDIO signals. |
| * |
| * Level 1 functions go from 0 to 9, with level 1 function '15' (0xf) specifying |
| * that level 2 functions are used instead. Level 2 has a lot more options, |
| * going from 0 to 61. Level 3 allows selection of MDIO functions which can be |
| * floating, or one of seven internal peripherals. Unfortunately, there are two |
| * level 2 functions that can select MDIO, and two MDIO channels so we have four |
| * sets of level 3 functions. |
| * |
| * For this driver, we've compounded the numbers together, so: |
| * 0 to 9 is level 1 |
| * 10 to 71 is 10 + level 2 number |
| * 72 to 79 is 72 + MDIO0 source for level 2 MDIO function. |
| * 80 to 87 is 80 + MDIO0 source for level 2 MDIO_E1 function. |
| * 88 to 95 is 88 + MDIO1 source for level 2 MDIO function. |
| * 96 to 103 is 96 + MDIO1 source for level 2 MDIO_E1 function. |
| * Examples: |
| * Function 28 corresponds UART0 |
| * Function 73 corresponds to MDIO0 to GMAC0 |
| * |
| * There are 170 configurable pins (called PL_GPIO in the datasheet). |
| */ |
| |
| /* |
| * Structure detailing the HW registers on the RZ/N1 devices. |
| * Both the Level 1 mux registers and Level 2 mux registers have the same |
| * structure. The only difference is that Level 2 has additional MDIO registers |
| * at the end. |
| */ |
| struct rzn1_pinctrl_regs { |
| u32 conf[170]; |
| u32 pad0[86]; |
| u32 status_protect; /* 0x400 */ |
| /* MDIO mux registers, level2 only */ |
| u32 l2_mdio[2]; |
| }; |
| |
| /** |
| * struct rzn1_pmx_func - describes rzn1 pinmux functions |
| * @name: the name of this specific function |
| * @groups: corresponding pin groups |
| * @num_groups: the number of groups |
| */ |
| struct rzn1_pmx_func { |
| const char *name; |
| const char **groups; |
| unsigned int num_groups; |
| }; |
| |
| /** |
| * struct rzn1_pin_group - describes an rzn1 pin group |
| * @name: the name of this specific pin group |
| * @func: the name of the function selected by this group |
| * @npins: the number of pins in this group array, i.e. the number of |
| * elements in .pins so we can iterate over that array |
| * @pins: array of pins. Needed due to pinctrl_ops.get_group_pins() |
| * @pin_ids: array of pin_ids, i.e. the value used to select the mux |
| */ |
| struct rzn1_pin_group { |
| const char *name; |
| const char *func; |
| unsigned int npins; |
| unsigned int *pins; |
| u8 *pin_ids; |
| }; |
| |
| struct rzn1_pinctrl { |
| struct device *dev; |
| struct clk *clk; |
| struct pinctrl_dev *pctl; |
| struct rzn1_pinctrl_regs __iomem *lev1; |
| struct rzn1_pinctrl_regs __iomem *lev2; |
| u32 lev1_protect_phys; |
| u32 lev2_protect_phys; |
| int mdio_func[2]; |
| |
| struct rzn1_pin_group *groups; |
| unsigned int ngroups; |
| |
| struct rzn1_pmx_func *functions; |
| unsigned int nfunctions; |
| }; |
| |
| #define RZN1_PINS_PROP "pinmux" |
| |
| #define RZN1_PIN(pin) PINCTRL_PIN(pin, "pl_gpio"#pin) |
| |
| static const struct pinctrl_pin_desc rzn1_pins[] = { |
| RZN1_PIN(0), RZN1_PIN(1), RZN1_PIN(2), RZN1_PIN(3), RZN1_PIN(4), |
| RZN1_PIN(5), RZN1_PIN(6), RZN1_PIN(7), RZN1_PIN(8), RZN1_PIN(9), |
| RZN1_PIN(10), RZN1_PIN(11), RZN1_PIN(12), RZN1_PIN(13), RZN1_PIN(14), |
| RZN1_PIN(15), RZN1_PIN(16), RZN1_PIN(17), RZN1_PIN(18), RZN1_PIN(19), |
| RZN1_PIN(20), RZN1_PIN(21), RZN1_PIN(22), RZN1_PIN(23), RZN1_PIN(24), |
| RZN1_PIN(25), RZN1_PIN(26), RZN1_PIN(27), RZN1_PIN(28), RZN1_PIN(29), |
| RZN1_PIN(30), RZN1_PIN(31), RZN1_PIN(32), RZN1_PIN(33), RZN1_PIN(34), |
| RZN1_PIN(35), RZN1_PIN(36), RZN1_PIN(37), RZN1_PIN(38), RZN1_PIN(39), |
| RZN1_PIN(40), RZN1_PIN(41), RZN1_PIN(42), RZN1_PIN(43), RZN1_PIN(44), |
| RZN1_PIN(45), RZN1_PIN(46), RZN1_PIN(47), RZN1_PIN(48), RZN1_PIN(49), |
| RZN1_PIN(50), RZN1_PIN(51), RZN1_PIN(52), RZN1_PIN(53), RZN1_PIN(54), |
| RZN1_PIN(55), RZN1_PIN(56), RZN1_PIN(57), RZN1_PIN(58), RZN1_PIN(59), |
| RZN1_PIN(60), RZN1_PIN(61), RZN1_PIN(62), RZN1_PIN(63), RZN1_PIN(64), |
| RZN1_PIN(65), RZN1_PIN(66), RZN1_PIN(67), RZN1_PIN(68), RZN1_PIN(69), |
| RZN1_PIN(70), RZN1_PIN(71), RZN1_PIN(72), RZN1_PIN(73), RZN1_PIN(74), |
| RZN1_PIN(75), RZN1_PIN(76), RZN1_PIN(77), RZN1_PIN(78), RZN1_PIN(79), |
| RZN1_PIN(80), RZN1_PIN(81), RZN1_PIN(82), RZN1_PIN(83), RZN1_PIN(84), |
| RZN1_PIN(85), RZN1_PIN(86), RZN1_PIN(87), RZN1_PIN(88), RZN1_PIN(89), |
| RZN1_PIN(90), RZN1_PIN(91), RZN1_PIN(92), RZN1_PIN(93), RZN1_PIN(94), |
| RZN1_PIN(95), RZN1_PIN(96), RZN1_PIN(97), RZN1_PIN(98), RZN1_PIN(99), |
| RZN1_PIN(100), RZN1_PIN(101), RZN1_PIN(102), RZN1_PIN(103), |
| RZN1_PIN(104), RZN1_PIN(105), RZN1_PIN(106), RZN1_PIN(107), |
| RZN1_PIN(108), RZN1_PIN(109), RZN1_PIN(110), RZN1_PIN(111), |
| RZN1_PIN(112), RZN1_PIN(113), RZN1_PIN(114), RZN1_PIN(115), |
| RZN1_PIN(116), RZN1_PIN(117), RZN1_PIN(118), RZN1_PIN(119), |
| RZN1_PIN(120), RZN1_PIN(121), RZN1_PIN(122), RZN1_PIN(123), |
| RZN1_PIN(124), RZN1_PIN(125), RZN1_PIN(126), RZN1_PIN(127), |
| RZN1_PIN(128), RZN1_PIN(129), RZN1_PIN(130), RZN1_PIN(131), |
| RZN1_PIN(132), RZN1_PIN(133), RZN1_PIN(134), RZN1_PIN(135), |
| RZN1_PIN(136), RZN1_PIN(137), RZN1_PIN(138), RZN1_PIN(139), |
| RZN1_PIN(140), RZN1_PIN(141), RZN1_PIN(142), RZN1_PIN(143), |
| RZN1_PIN(144), RZN1_PIN(145), RZN1_PIN(146), RZN1_PIN(147), |
| RZN1_PIN(148), RZN1_PIN(149), RZN1_PIN(150), RZN1_PIN(151), |
| RZN1_PIN(152), RZN1_PIN(153), RZN1_PIN(154), RZN1_PIN(155), |
| RZN1_PIN(156), RZN1_PIN(157), RZN1_PIN(158), RZN1_PIN(159), |
| RZN1_PIN(160), RZN1_PIN(161), RZN1_PIN(162), RZN1_PIN(163), |
| RZN1_PIN(164), RZN1_PIN(165), RZN1_PIN(166), RZN1_PIN(167), |
| RZN1_PIN(168), RZN1_PIN(169), |
| }; |
| |
| enum { |
| LOCK_LEVEL1 = 0x1, |
| LOCK_LEVEL2 = 0x2, |
| LOCK_ALL = LOCK_LEVEL1 | LOCK_LEVEL2, |
| }; |
| |
| static void rzn1_hw_set_lock(struct rzn1_pinctrl *ipctl, u8 lock, u8 value) |
| { |
| /* |
| * The pinmux configuration is locked by writing the physical address of |
| * the status_protect register to itself. It is unlocked by writing the |
| * address | 1. |
| */ |
| if (lock & LOCK_LEVEL1) { |
| u32 val = ipctl->lev1_protect_phys | !(value & LOCK_LEVEL1); |
| |
| writel(val, &ipctl->lev1->status_protect); |
| } |
| |
| if (lock & LOCK_LEVEL2) { |
| u32 val = ipctl->lev2_protect_phys | !(value & LOCK_LEVEL2); |
| |
| writel(val, &ipctl->lev2->status_protect); |
| } |
| } |
| |
| static void rzn1_pinctrl_mdio_select(struct rzn1_pinctrl *ipctl, int mdio, |
| u32 func) |
| { |
| if (ipctl->mdio_func[mdio] >= 0 && ipctl->mdio_func[mdio] != func) |
| dev_warn(ipctl->dev, "conflicting setting for mdio%d!\n", mdio); |
| ipctl->mdio_func[mdio] = func; |
| |
| dev_dbg(ipctl->dev, "setting mdio%d to %u\n", mdio, func); |
| |
| writel(func, &ipctl->lev2->l2_mdio[mdio]); |
| } |
| |
| /* |
| * Using a composite pin description, set the hardware pinmux registers |
| * with the corresponding values. |
| * Make sure to unlock write protection and reset it afterward. |
| * |
| * NOTE: There is no protection for potential concurrency, it is assumed these |
| * calls are serialized already. |
| */ |
| static int rzn1_set_hw_pin_func(struct rzn1_pinctrl *ipctl, unsigned int pin, |
| u32 pin_config, u8 use_locks) |
| { |
| u32 l1_cache; |
| u32 l2_cache; |
| u32 l1; |
| u32 l2; |
| |
| /* Level 3 MDIO multiplexing */ |
| if (pin_config >= RZN1_FUNC_MDIO0_HIGHZ && |
| pin_config <= RZN1_FUNC_MDIO1_E1_SWITCH) { |
| int mdio_channel; |
| u32 mdio_func; |
| |
| if (pin_config <= RZN1_FUNC_MDIO1_HIGHZ) |
| mdio_channel = 0; |
| else |
| mdio_channel = 1; |
| |
| /* Get MDIO func, and convert the func to the level 2 number */ |
| if (pin_config <= RZN1_FUNC_MDIO0_SWITCH) { |
| mdio_func = pin_config - RZN1_FUNC_MDIO0_HIGHZ; |
| pin_config = RZN1_FUNC_ETH_MDIO; |
| } else if (pin_config <= RZN1_FUNC_MDIO0_E1_SWITCH) { |
| mdio_func = pin_config - RZN1_FUNC_MDIO0_E1_HIGHZ; |
| pin_config = RZN1_FUNC_ETH_MDIO_E1; |
| } else if (pin_config <= RZN1_FUNC_MDIO1_SWITCH) { |
| mdio_func = pin_config - RZN1_FUNC_MDIO1_HIGHZ; |
| pin_config = RZN1_FUNC_ETH_MDIO; |
| } else { |
| mdio_func = pin_config - RZN1_FUNC_MDIO1_E1_HIGHZ; |
| pin_config = RZN1_FUNC_ETH_MDIO_E1; |
| } |
| rzn1_pinctrl_mdio_select(ipctl, mdio_channel, mdio_func); |
| } |
| |
| /* Note here, we do not allow anything past the MDIO Mux values */ |
| if (pin >= ARRAY_SIZE(ipctl->lev1->conf) || |
| pin_config >= RZN1_FUNC_MDIO0_HIGHZ) |
| return -EINVAL; |
| |
| l1 = readl(&ipctl->lev1->conf[pin]); |
| l1_cache = l1; |
| l2 = readl(&ipctl->lev2->conf[pin]); |
| l2_cache = l2; |
| |
| dev_dbg(ipctl->dev, "setting func for pin %u to %u\n", pin, pin_config); |
| |
| l1 &= ~(RZN1_L1_FUNC_MASK << RZN1_L1_FUNCTION); |
| |
| if (pin_config < RZN1_FUNC_L2_OFFSET) { |
| l1 |= (pin_config << RZN1_L1_FUNCTION); |
| } else { |
| l1 |= (RZN1_L1_FUNCTION_L2 << RZN1_L1_FUNCTION); |
| |
| l2 = pin_config - RZN1_FUNC_L2_OFFSET; |
| } |
| |
| /* If either configuration changes, we update both anyway */ |
| if (l1 != l1_cache || l2 != l2_cache) { |
| writel(l1, &ipctl->lev1->conf[pin]); |
| writel(l2, &ipctl->lev2->conf[pin]); |
| } |
| |
| return 0; |
| } |
| |
| static const struct rzn1_pin_group *rzn1_pinctrl_find_group_by_name( |
| const struct rzn1_pinctrl *ipctl, const char *name) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < ipctl->ngroups; i++) { |
| if (!strcmp(ipctl->groups[i].name, name)) |
| return &ipctl->groups[i]; |
| } |
| |
| return NULL; |
| } |
| |
| static int rzn1_get_groups_count(struct pinctrl_dev *pctldev) |
| { |
| struct rzn1_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev); |
| |
| return ipctl->ngroups; |
| } |
| |
| static const char *rzn1_get_group_name(struct pinctrl_dev *pctldev, |
| unsigned int selector) |
| { |
| struct rzn1_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev); |
| |
| return ipctl->groups[selector].name; |
| } |
| |
| static int rzn1_get_group_pins(struct pinctrl_dev *pctldev, |
| unsigned int selector, const unsigned int **pins, |
| unsigned int *npins) |
| { |
| struct rzn1_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev); |
| |
| if (selector >= ipctl->ngroups) |
| return -EINVAL; |
| |
| *pins = ipctl->groups[selector].pins; |
| *npins = ipctl->groups[selector].npins; |
| |
| return 0; |
| } |
| |
| /* |
| * This function is called for each pinctl 'Function' node. |
| * Sub-nodes can be used to describe multiple 'Groups' for the 'Function' |
| * If there aren't any sub-nodes, the 'Group' is essentially the 'Function'. |
| * Each 'Group' uses pinmux = <...> to detail the pins and data used to select |
| * the functionality. Each 'Group' has optional pin configurations that apply |
| * to all pins in the 'Group'. |
| */ |
| static int rzn1_dt_node_to_map_one(struct pinctrl_dev *pctldev, |
| struct device_node *np, |
| struct pinctrl_map **map, |
| unsigned int *num_maps) |
| { |
| struct rzn1_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev); |
| const struct rzn1_pin_group *grp; |
| unsigned long *configs = NULL; |
| unsigned int reserved_maps = *num_maps; |
| unsigned int num_configs = 0; |
| unsigned int reserve = 1; |
| int ret; |
| |
| dev_dbg(ipctl->dev, "processing node %pOF\n", np); |
| |
| grp = rzn1_pinctrl_find_group_by_name(ipctl, np->name); |
| if (!grp) { |
| dev_err(ipctl->dev, "unable to find group for node %pOF\n", np); |
| |
| return -EINVAL; |
| } |
| |
| /* Get the group's pin configuration */ |
| ret = pinconf_generic_parse_dt_config(np, pctldev, &configs, |
| &num_configs); |
| if (ret < 0) { |
| dev_err(ipctl->dev, "%pOF: could not parse property\n", np); |
| |
| return ret; |
| } |
| |
| if (num_configs) |
| reserve++; |
| |
| /* Increase the number of maps to cover this group */ |
| ret = pinctrl_utils_reserve_map(pctldev, map, &reserved_maps, num_maps, |
| reserve); |
| if (ret < 0) |
| goto out; |
| |
| /* Associate the group with the function */ |
| ret = pinctrl_utils_add_map_mux(pctldev, map, &reserved_maps, num_maps, |
| grp->name, grp->func); |
| if (ret < 0) |
| goto out; |
| |
| if (num_configs) { |
| /* Associate the group's pin configuration with the group */ |
| ret = pinctrl_utils_add_map_configs(pctldev, map, |
| &reserved_maps, num_maps, grp->name, |
| configs, num_configs, |
| PIN_MAP_TYPE_CONFIGS_GROUP); |
| if (ret < 0) |
| goto out; |
| } |
| |
| dev_dbg(pctldev->dev, "maps: function %s group %s (%d pins)\n", |
| grp->func, grp->name, grp->npins); |
| |
| out: |
| kfree(configs); |
| |
| return ret; |
| } |
| |
| static int rzn1_dt_node_to_map(struct pinctrl_dev *pctldev, |
| struct device_node *np, |
| struct pinctrl_map **map, |
| unsigned int *num_maps) |
| { |
| int ret; |
| |
| *map = NULL; |
| *num_maps = 0; |
| |
| ret = rzn1_dt_node_to_map_one(pctldev, np, map, num_maps); |
| if (ret < 0) |
| return ret; |
| |
| for_each_child_of_node_scoped(np, child) { |
| ret = rzn1_dt_node_to_map_one(pctldev, child, map, num_maps); |
| if (ret < 0) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static const struct pinctrl_ops rzn1_pctrl_ops = { |
| .get_groups_count = rzn1_get_groups_count, |
| .get_group_name = rzn1_get_group_name, |
| .get_group_pins = rzn1_get_group_pins, |
| .dt_node_to_map = rzn1_dt_node_to_map, |
| .dt_free_map = pinctrl_utils_free_map, |
| }; |
| |
| static int rzn1_pmx_get_funcs_count(struct pinctrl_dev *pctldev) |
| { |
| struct rzn1_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev); |
| |
| return ipctl->nfunctions; |
| } |
| |
| static const char *rzn1_pmx_get_func_name(struct pinctrl_dev *pctldev, |
| unsigned int selector) |
| { |
| struct rzn1_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev); |
| |
| return ipctl->functions[selector].name; |
| } |
| |
| static int rzn1_pmx_get_groups(struct pinctrl_dev *pctldev, |
| unsigned int selector, |
| const char * const **groups, |
| unsigned int * const num_groups) |
| { |
| struct rzn1_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev); |
| |
| *groups = ipctl->functions[selector].groups; |
| *num_groups = ipctl->functions[selector].num_groups; |
| |
| return 0; |
| } |
| |
| static int rzn1_set_mux(struct pinctrl_dev *pctldev, unsigned int selector, |
| unsigned int group) |
| { |
| struct rzn1_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev); |
| struct rzn1_pin_group *grp = &ipctl->groups[group]; |
| unsigned int i, grp_pins = grp->npins; |
| |
| dev_dbg(ipctl->dev, "set mux %s(%d) group %s(%d)\n", |
| ipctl->functions[selector].name, selector, grp->name, group); |
| |
| rzn1_hw_set_lock(ipctl, LOCK_ALL, LOCK_ALL); |
| for (i = 0; i < grp_pins; i++) |
| rzn1_set_hw_pin_func(ipctl, grp->pins[i], grp->pin_ids[i], 0); |
| rzn1_hw_set_lock(ipctl, LOCK_ALL, 0); |
| |
| return 0; |
| } |
| |
| static const struct pinmux_ops rzn1_pmx_ops = { |
| .get_functions_count = rzn1_pmx_get_funcs_count, |
| .get_function_name = rzn1_pmx_get_func_name, |
| .get_function_groups = rzn1_pmx_get_groups, |
| .set_mux = rzn1_set_mux, |
| }; |
| |
| static int rzn1_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin, |
| unsigned long *config) |
| { |
| struct rzn1_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev); |
| enum pin_config_param param = pinconf_to_config_param(*config); |
| static const u32 reg_drive[4] = { 4, 6, 8, 12 }; |
| u32 pull, drive, l1mux; |
| u32 l1, l2, arg = 0; |
| |
| if (pin >= ARRAY_SIZE(ipctl->lev1->conf)) |
| return -EINVAL; |
| |
| l1 = readl(&ipctl->lev1->conf[pin]); |
| |
| l1mux = l1 & RZN1_L1_FUNC_MASK; |
| pull = (l1 >> RZN1_L1_PIN_PULL) & 0x3; |
| drive = (l1 >> RZN1_L1_PIN_DRIVE_STRENGTH) & 0x3; |
| |
| switch (param) { |
| case PIN_CONFIG_BIAS_PULL_UP: |
| if (pull != RZN1_L1_PIN_PULL_UP) |
| return -EINVAL; |
| break; |
| case PIN_CONFIG_BIAS_PULL_DOWN: |
| if (pull != RZN1_L1_PIN_PULL_DOWN) |
| return -EINVAL; |
| break; |
| case PIN_CONFIG_BIAS_DISABLE: |
| if (pull != RZN1_L1_PIN_PULL_NONE) |
| return -EINVAL; |
| break; |
| case PIN_CONFIG_DRIVE_STRENGTH: |
| arg = reg_drive[drive]; |
| break; |
| case PIN_CONFIG_BIAS_HIGH_IMPEDANCE: |
| l2 = readl(&ipctl->lev2->conf[pin]); |
| if (l1mux == RZN1_L1_FUNCTION_L2) { |
| if (l2 != 0) |
| return -EINVAL; |
| } else if (l1mux != RZN1_FUNC_HIGHZ) { |
| return -EINVAL; |
| } |
| break; |
| default: |
| return -ENOTSUPP; |
| } |
| |
| *config = pinconf_to_config_packed(param, arg); |
| |
| return 0; |
| } |
| |
| static int rzn1_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, |
| unsigned long *configs, unsigned int num_configs) |
| { |
| struct rzn1_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev); |
| enum pin_config_param param; |
| unsigned int i; |
| u32 l1, l1_cache; |
| u32 drv; |
| u32 arg; |
| |
| if (pin >= ARRAY_SIZE(ipctl->lev1->conf)) |
| return -EINVAL; |
| |
| l1 = readl(&ipctl->lev1->conf[pin]); |
| l1_cache = l1; |
| |
| for (i = 0; i < num_configs; i++) { |
| param = pinconf_to_config_param(configs[i]); |
| arg = pinconf_to_config_argument(configs[i]); |
| |
| switch (param) { |
| case PIN_CONFIG_BIAS_PULL_UP: |
| dev_dbg(ipctl->dev, "set pin %d pull up\n", pin); |
| l1 &= ~(0x3 << RZN1_L1_PIN_PULL); |
| l1 |= (RZN1_L1_PIN_PULL_UP << RZN1_L1_PIN_PULL); |
| break; |
| case PIN_CONFIG_BIAS_PULL_DOWN: |
| dev_dbg(ipctl->dev, "set pin %d pull down\n", pin); |
| l1 &= ~(0x3 << RZN1_L1_PIN_PULL); |
| l1 |= (RZN1_L1_PIN_PULL_DOWN << RZN1_L1_PIN_PULL); |
| break; |
| case PIN_CONFIG_BIAS_DISABLE: |
| dev_dbg(ipctl->dev, "set pin %d bias off\n", pin); |
| l1 &= ~(0x3 << RZN1_L1_PIN_PULL); |
| l1 |= (RZN1_L1_PIN_PULL_NONE << RZN1_L1_PIN_PULL); |
| break; |
| case PIN_CONFIG_DRIVE_STRENGTH: |
| dev_dbg(ipctl->dev, "set pin %d drv %umA\n", pin, arg); |
| switch (arg) { |
| case 4: |
| drv = RZN1_L1_PIN_DRIVE_STRENGTH_4MA; |
| break; |
| case 6: |
| drv = RZN1_L1_PIN_DRIVE_STRENGTH_6MA; |
| break; |
| case 8: |
| drv = RZN1_L1_PIN_DRIVE_STRENGTH_8MA; |
| break; |
| case 12: |
| drv = RZN1_L1_PIN_DRIVE_STRENGTH_12MA; |
| break; |
| default: |
| dev_err(ipctl->dev, |
| "Drive strength %umA not supported\n", |
| arg); |
| |
| return -EINVAL; |
| } |
| |
| l1 &= ~(0x3 << RZN1_L1_PIN_DRIVE_STRENGTH); |
| l1 |= (drv << RZN1_L1_PIN_DRIVE_STRENGTH); |
| break; |
| |
| case PIN_CONFIG_BIAS_HIGH_IMPEDANCE: |
| dev_dbg(ipctl->dev, "set pin %d High-Z\n", pin); |
| l1 &= ~RZN1_L1_FUNC_MASK; |
| l1 |= RZN1_FUNC_HIGHZ; |
| break; |
| default: |
| return -ENOTSUPP; |
| } |
| } |
| |
| if (l1 != l1_cache) { |
| rzn1_hw_set_lock(ipctl, LOCK_LEVEL1, LOCK_LEVEL1); |
| writel(l1, &ipctl->lev1->conf[pin]); |
| rzn1_hw_set_lock(ipctl, LOCK_LEVEL1, 0); |
| } |
| |
| return 0; |
| } |
| |
| static int rzn1_pinconf_group_get(struct pinctrl_dev *pctldev, |
| unsigned int selector, |
| unsigned long *config) |
| { |
| struct rzn1_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev); |
| struct rzn1_pin_group *grp = &ipctl->groups[selector]; |
| unsigned long old = 0; |
| unsigned int i; |
| |
| dev_dbg(ipctl->dev, "group get %s selector:%u\n", grp->name, selector); |
| |
| for (i = 0; i < grp->npins; i++) { |
| if (rzn1_pinconf_get(pctldev, grp->pins[i], config)) |
| return -ENOTSUPP; |
| |
| /* configs do not match between two pins */ |
| if (i && (old != *config)) |
| return -ENOTSUPP; |
| |
| old = *config; |
| } |
| |
| return 0; |
| } |
| |
| static int rzn1_pinconf_group_set(struct pinctrl_dev *pctldev, |
| unsigned int selector, |
| unsigned long *configs, |
| unsigned int num_configs) |
| { |
| struct rzn1_pinctrl *ipctl = pinctrl_dev_get_drvdata(pctldev); |
| struct rzn1_pin_group *grp = &ipctl->groups[selector]; |
| unsigned int i; |
| int ret; |
| |
| dev_dbg(ipctl->dev, "group set %s selector:%u configs:%p/%d\n", |
| grp->name, selector, configs, num_configs); |
| |
| for (i = 0; i < grp->npins; i++) { |
| unsigned int pin = grp->pins[i]; |
| |
| ret = rzn1_pinconf_set(pctldev, pin, configs, num_configs); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static const struct pinconf_ops rzn1_pinconf_ops = { |
| .is_generic = true, |
| .pin_config_get = rzn1_pinconf_get, |
| .pin_config_set = rzn1_pinconf_set, |
| .pin_config_group_get = rzn1_pinconf_group_get, |
| .pin_config_group_set = rzn1_pinconf_group_set, |
| .pin_config_config_dbg_show = pinconf_generic_dump_config, |
| }; |
| |
| static struct pinctrl_desc rzn1_pinctrl_desc = { |
| .pctlops = &rzn1_pctrl_ops, |
| .pmxops = &rzn1_pmx_ops, |
| .confops = &rzn1_pinconf_ops, |
| .owner = THIS_MODULE, |
| }; |
| |
| static int rzn1_pinctrl_parse_groups(struct device_node *np, |
| struct rzn1_pin_group *grp, |
| struct rzn1_pinctrl *ipctl) |
| { |
| const __be32 *list; |
| unsigned int i; |
| int size; |
| |
| dev_dbg(ipctl->dev, "%s: %s\n", __func__, np->name); |
| |
| /* Initialise group */ |
| grp->name = np->name; |
| |
| /* |
| * The binding format is |
| * pinmux = <PIN_FUNC_ID CONFIG ...>, |
| * do sanity check and calculate pins number |
| */ |
| list = of_get_property(np, RZN1_PINS_PROP, &size); |
| if (!list) { |
| dev_err(ipctl->dev, |
| "no " RZN1_PINS_PROP " property in node %pOF\n", np); |
| |
| return -EINVAL; |
| } |
| |
| if (!size) { |
| dev_err(ipctl->dev, "Invalid " RZN1_PINS_PROP " in node %pOF\n", |
| np); |
| |
| return -EINVAL; |
| } |
| |
| grp->npins = size / sizeof(list[0]); |
| grp->pin_ids = devm_kmalloc_array(ipctl->dev, |
| grp->npins, sizeof(grp->pin_ids[0]), |
| GFP_KERNEL); |
| grp->pins = devm_kmalloc_array(ipctl->dev, |
| grp->npins, sizeof(grp->pins[0]), |
| GFP_KERNEL); |
| if (!grp->pin_ids || !grp->pins) |
| return -ENOMEM; |
| |
| for (i = 0; i < grp->npins; i++) { |
| u32 pin_id = be32_to_cpu(*list++); |
| |
| grp->pins[i] = pin_id & 0xff; |
| grp->pin_ids[i] = (pin_id >> 8) & 0x7f; |
| } |
| |
| return grp->npins; |
| } |
| |
| static int rzn1_pinctrl_count_function_groups(struct device_node *np) |
| { |
| int count = 0; |
| |
| if (of_property_count_u32_elems(np, RZN1_PINS_PROP) > 0) |
| count++; |
| |
| for_each_child_of_node_scoped(np, child) { |
| if (of_property_count_u32_elems(child, RZN1_PINS_PROP) > 0) |
| count++; |
| } |
| |
| return count; |
| } |
| |
| static int rzn1_pinctrl_parse_functions(struct device_node *np, |
| struct rzn1_pinctrl *ipctl, |
| unsigned int index) |
| { |
| struct rzn1_pmx_func *func; |
| struct rzn1_pin_group *grp; |
| unsigned int i = 0; |
| int ret; |
| |
| func = &ipctl->functions[index]; |
| |
| /* Initialise function */ |
| func->name = np->name; |
| func->num_groups = rzn1_pinctrl_count_function_groups(np); |
| if (func->num_groups == 0) { |
| dev_err(ipctl->dev, "no groups defined in %pOF\n", np); |
| return -EINVAL; |
| } |
| dev_dbg(ipctl->dev, "function %s has %d groups\n", |
| np->name, func->num_groups); |
| |
| func->groups = devm_kmalloc_array(ipctl->dev, |
| func->num_groups, sizeof(char *), |
| GFP_KERNEL); |
| if (!func->groups) |
| return -ENOMEM; |
| |
| if (of_property_count_u32_elems(np, RZN1_PINS_PROP) > 0) { |
| func->groups[i] = np->name; |
| grp = &ipctl->groups[ipctl->ngroups]; |
| grp->func = func->name; |
| ret = rzn1_pinctrl_parse_groups(np, grp, ipctl); |
| if (ret < 0) |
| return ret; |
| i++; |
| ipctl->ngroups++; |
| } |
| |
| for_each_child_of_node_scoped(np, child) { |
| func->groups[i] = child->name; |
| grp = &ipctl->groups[ipctl->ngroups]; |
| grp->func = func->name; |
| ret = rzn1_pinctrl_parse_groups(child, grp, ipctl); |
| if (ret < 0) |
| return ret; |
| i++; |
| ipctl->ngroups++; |
| } |
| |
| dev_dbg(ipctl->dev, "function %s parsed %u/%u groups\n", |
| np->name, i, func->num_groups); |
| |
| return 0; |
| } |
| |
| static int rzn1_pinctrl_probe_dt(struct platform_device *pdev, |
| struct rzn1_pinctrl *ipctl) |
| { |
| struct device_node *np = pdev->dev.of_node; |
| unsigned int maxgroups = 0; |
| unsigned int i = 0; |
| int nfuncs = 0; |
| int ret; |
| |
| nfuncs = of_get_child_count(np); |
| if (nfuncs <= 0) |
| return 0; |
| |
| ipctl->nfunctions = nfuncs; |
| ipctl->functions = devm_kmalloc_array(&pdev->dev, nfuncs, |
| sizeof(*ipctl->functions), |
| GFP_KERNEL); |
| if (!ipctl->functions) |
| return -ENOMEM; |
| |
| ipctl->ngroups = 0; |
| for_each_child_of_node_scoped(np, child) |
| maxgroups += rzn1_pinctrl_count_function_groups(child); |
| |
| ipctl->groups = devm_kmalloc_array(&pdev->dev, |
| maxgroups, |
| sizeof(*ipctl->groups), |
| GFP_KERNEL); |
| if (!ipctl->groups) |
| return -ENOMEM; |
| |
| for_each_child_of_node_scoped(np, child) { |
| ret = rzn1_pinctrl_parse_functions(child, ipctl, i++); |
| if (ret < 0) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int rzn1_pinctrl_probe(struct platform_device *pdev) |
| { |
| struct rzn1_pinctrl *ipctl; |
| struct resource *res; |
| int ret; |
| |
| /* Create state holders etc for this driver */ |
| ipctl = devm_kzalloc(&pdev->dev, sizeof(*ipctl), GFP_KERNEL); |
| if (!ipctl) |
| return -ENOMEM; |
| |
| ipctl->mdio_func[0] = -1; |
| ipctl->mdio_func[1] = -1; |
| |
| ipctl->lev1 = devm_platform_get_and_ioremap_resource(pdev, 0, &res); |
| if (IS_ERR(ipctl->lev1)) |
| return PTR_ERR(ipctl->lev1); |
| ipctl->lev1_protect_phys = (u32)res->start + 0x400; |
| |
| ipctl->lev2 = devm_platform_get_and_ioremap_resource(pdev, 1, &res); |
| if (IS_ERR(ipctl->lev2)) |
| return PTR_ERR(ipctl->lev2); |
| ipctl->lev2_protect_phys = (u32)res->start + 0x400; |
| |
| ipctl->clk = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(ipctl->clk)) |
| return PTR_ERR(ipctl->clk); |
| ret = clk_prepare_enable(ipctl->clk); |
| if (ret) |
| return ret; |
| |
| ipctl->dev = &pdev->dev; |
| rzn1_pinctrl_desc.name = dev_name(&pdev->dev); |
| rzn1_pinctrl_desc.pins = rzn1_pins; |
| rzn1_pinctrl_desc.npins = ARRAY_SIZE(rzn1_pins); |
| |
| ret = rzn1_pinctrl_probe_dt(pdev, ipctl); |
| if (ret) { |
| dev_err(&pdev->dev, "fail to probe dt properties\n"); |
| goto err_clk; |
| } |
| |
| platform_set_drvdata(pdev, ipctl); |
| |
| ret = devm_pinctrl_register_and_init(&pdev->dev, &rzn1_pinctrl_desc, |
| ipctl, &ipctl->pctl); |
| if (ret) { |
| dev_err(&pdev->dev, "could not register rzn1 pinctrl driver\n"); |
| goto err_clk; |
| } |
| |
| ret = pinctrl_enable(ipctl->pctl); |
| if (ret) |
| goto err_clk; |
| |
| dev_info(&pdev->dev, "probed\n"); |
| |
| return 0; |
| |
| err_clk: |
| clk_disable_unprepare(ipctl->clk); |
| |
| return ret; |
| } |
| |
| static void rzn1_pinctrl_remove(struct platform_device *pdev) |
| { |
| struct rzn1_pinctrl *ipctl = platform_get_drvdata(pdev); |
| |
| clk_disable_unprepare(ipctl->clk); |
| } |
| |
| static const struct of_device_id rzn1_pinctrl_match[] = { |
| { .compatible = "renesas,rzn1-pinctrl", }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, rzn1_pinctrl_match); |
| |
| static struct platform_driver rzn1_pinctrl_driver = { |
| .probe = rzn1_pinctrl_probe, |
| .remove_new = rzn1_pinctrl_remove, |
| .driver = { |
| .name = "rzn1-pinctrl", |
| .of_match_table = rzn1_pinctrl_match, |
| }, |
| }; |
| |
| static int __init _pinctrl_drv_register(void) |
| { |
| return platform_driver_register(&rzn1_pinctrl_driver); |
| } |
| subsys_initcall(_pinctrl_drv_register); |
| |
| MODULE_AUTHOR("Phil Edworthy <phil.edworthy@renesas.com>"); |
| MODULE_DESCRIPTION("Renesas RZ/N1 pinctrl driver"); |