mm/Makefile

# SPDX-License-Identifier: GPL-2.0
#
# Makefile for the linux memory manager.
#

KASAN_SANITIZE_slab_common.o := n
KASAN_SANITIZE_slub.o := n
KASAN_SANITIZE_kmemleak.o := n
KCSAN_SANITIZE_kmemleak.o := n

# These produce frequent data race reports: most of them are due to races on
# the same word but accesses to different bits of that word. Re-enable KCSAN
# for these when we have more consensus on what to do about them.
KCSAN_SANITIZE_slab_common.o := n
KCSAN_SANITIZE_slub.o := n
KCSAN_SANITIZE_page_alloc.o := n
# But enable explicit instrumentation for memory barriers.
KCSAN_INSTRUMENT_BARRIERS := y

# These files are disabled because they produce non-interesting and/or
# flaky coverage that is not a function of syscall inputs. E.g. slab is out of
# free pages, or a task is migrated between nodes.
KCOV_INSTRUMENT_slab_common.o := n
KCOV_INSTRUMENT_slub.o := n
KCOV_INSTRUMENT_page_alloc.o := n
KCOV_INSTRUMENT_debug-pagealloc.o := n
KCOV_INSTRUMENT_kmemleak.o := n
KCOV_INSTRUMENT_memcontrol.o := n
KCOV_INSTRUMENT_memcontrol-v1.o := n
KCOV_INSTRUMENT_mmzone.o := n
KCOV_INSTRUMENT_vmstat.o := n
KCOV_INSTRUMENT_failslab.o := n

CFLAGS_init-mm.o += -Wno-override-init

mmu-y			:= nommu.o
mmu-$(CONFIG_MMU)	:= highmem.o memory.o mincore.o \
			   mlock.o mmap.o mmu_gather.o mprotect.o mremap.o \
			   msync.o page_vma_mapped.o pagewalk.o \
			   pgtable-generic.o rmap.o vmalloc.o vma.o


ifdef CONFIG_CROSS_MEMORY_ATTACH
mmu-$(CONFIG_MMU)	+= process_vm_access.o
endif

ifdef CONFIG_64BIT
mmu-$(CONFIG_MMU)	+= mseal.o
endif

obj-y			:= filemap.o mempool.o oom_kill.o fadvise.o \
			   maccess.o page-writeback.o folio-compat.o \
			   readahead.o swap.o truncate.o vmscan.o shrinker.o \
			   shmem.o util.o mmzone.o vmstat.o backing-dev.o \
			   mm_init.o percpu.o slab_common.o \
			   compaction.o show_mem.o \
			   interval_tree.o list_lru.o workingset.o \
			   debug.o gup.o mmap_lock.o $(mmu-y)

# Give 'page_alloc' its own module-parameter namespace
page-alloc-y := page_alloc.o
page-alloc-$(CONFIG_SHUFFLE_PAGE_ALLOCATOR) += shuffle.o

# Give 'memory_hotplug' its own module-parameter namespace
memory-hotplug-$(CONFIG_MEMORY_HOTPLUG) += memory_hotplug.o

obj-y += page-alloc.o
obj-y += init-mm.o
obj-y += memblock.o
obj-y += $(memory-hotplug-y)
obj-y += slub.o

ifdef CONFIG_MMU
	obj-$(CONFIG_ADVISE_SYSCALLS)	+= madvise.o
endif

obj-$(CONFIG_SWAP)	+= page_io.o swap_state.o swapfile.o swap_slots.o
obj-$(CONFIG_ZSWAP)	+= zswap.o
obj-$(CONFIG_HAS_DMA)	+= dmapool.o
obj-$(CONFIG_HUGETLBFS)	+= hugetlb.o
obj-$(CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP)	+= hugetlb_vmemmap.o
obj-$(CONFIG_NUMA) 	+= mempolicy.o
obj-$(CONFIG_SPARSEMEM)	+= sparse.o
obj-$(CONFIG_SPARSEMEM_VMEMMAP) += sparse-vmemmap.o
obj-$(CONFIG_MMU_NOTIFIER) += mmu_notifier.o
obj-$(CONFIG_KSM) += ksm.o
obj-$(CONFIG_PAGE_POISONING) += page_poison.o
obj-$(CONFIG_KASAN)	+= kasan/
obj-$(CONFIG_KFENCE) += kfence/
obj-$(CONFIG_KMSAN)	+= kmsan/
obj-$(CONFIG_FAILSLAB) += failslab.o
obj-$(CONFIG_FAIL_PAGE_ALLOC) += fail_page_alloc.o
obj-$(CONFIG_MEMTEST)		+= memtest.o
obj-$(CONFIG_MIGRATION) += migrate.o
obj-$(CONFIG_NUMA) += memory-tiers.o
obj-$(CONFIG_DEVICE_MIGRATION) += migrate_device.o
obj-$(CONFIG_TRANSPARENT_HUGEPAGE) += huge_memory.o khugepaged.o
obj-$(CONFIG_PAGE_COUNTER) += page_counter.o
obj-$(CONFIG_MEMCG_V1) += memcontrol-v1.o
obj-$(CONFIG_MEMCG) += memcontrol.o vmpressure.o
ifdef CONFIG_SWAP
obj-$(CONFIG_MEMCG) += swap_cgroup.o
endif
obj-$(CONFIG_CGROUP_HUGETLB) += hugetlb_cgroup.o
obj-$(CONFIG_GUP_TEST) += gup_test.o
obj-$(CONFIG_DMAPOOL_TEST) += dmapool_test.o
obj-$(CONFIG_MEMORY_FAILURE) += memory-failure.o
obj-$(CONFIG_HWPOISON_INJECT) += hwpoison-inject.o
obj-$(CONFIG_DEBUG_KMEMLEAK) += kmemleak.o
obj-$(CONFIG_DEBUG_RODATA_TEST) += rodata_test.o
obj-$(CONFIG_DEBUG_VM_PGTABLE) += debug_vm_pgtable.o
obj-$(CONFIG_PAGE_OWNER) += page_owner.o
obj-$(CONFIG_MEMORY_ISOLATION) += page_isolation.o
obj-$(CONFIG_ZPOOL)	+= zpool.o
obj-$(CONFIG_ZBUD)	+= zbud.o
obj-$(CONFIG_ZSMALLOC)	+= zsmalloc.o
obj-$(CONFIG_Z3FOLD)	+= z3fold.o
obj-$(CONFIG_GENERIC_EARLY_IOREMAP) += early_ioremap.o
obj-$(CONFIG_CMA)	+= cma.o
obj-$(CONFIG_NUMA) += numa.o
obj-$(CONFIG_NUMA_MEMBLKS) += numa_memblks.o
obj-$(CONFIG_NUMA_EMU) += numa_emulation.o
obj-$(CONFIG_MEMORY_BALLOON) += balloon_compaction.o
obj-$(CONFIG_PAGE_EXTENSION) += page_ext.o
obj-$(CONFIG_PAGE_TABLE_CHECK) += page_table_check.o
obj-$(CONFIG_CMA_DEBUGFS) += cma_debug.o
obj-$(CONFIG_SECRETMEM) += secretmem.o
obj-$(CONFIG_CMA_SYSFS) += cma_sysfs.o
obj-$(CONFIG_USERFAULTFD) += userfaultfd.o
obj-$(CONFIG_IDLE_PAGE_TRACKING) += page_idle.o
obj-$(CONFIG_DEBUG_PAGEALLOC) += debug_page_alloc.o
obj-$(CONFIG_DEBUG_PAGE_REF) += debug_page_ref.o
obj-$(CONFIG_DAMON) += damon/
obj-$(CONFIG_HARDENED_USERCOPY) += usercopy.o
obj-$(CONFIG_PERCPU_STATS) += percpu-stats.o
obj-$(CONFIG_ZONE_DEVICE) += memremap.o
obj-$(CONFIG_HMM_MIRROR) += hmm.o
obj-$(CONFIG_MEMFD_CREATE) += memfd.o
obj-$(CONFIG_MAPPING_DIRTY_HELPERS) += mapping_dirty_helpers.o
obj-$(CONFIG_PTDUMP_CORE) += ptdump.o
obj-$(CONFIG_PAGE_REPORTING) += page_reporting.o
obj-$(CONFIG_IO_MAPPING) += io-mapping.o
obj-$(CONFIG_HAVE_BOOTMEM_INFO_NODE) += bootmem_info.o
obj-$(CONFIG_GENERIC_IOREMAP) += ioremap.o
obj-$(CONFIG_SHRINKER_DEBUG) += shrinker_debug.o
obj-$(CONFIG_EXECMEM) += execmem.o
obj-$(CONFIG_TMPFS_QUOTA) += shmem_quota.o