| /******************************************************************************* |
| * |
| * (c) 1998 by Computone Corporation |
| * |
| ******************************************************************************** |
| * |
| * |
| * PACKAGE: Linux tty Device Driver for IntelliPort family of multiport |
| * serial I/O controllers. |
| * |
| * DESCRIPTION: Definition table for In-line and Bypass commands. Applicable |
| * only when the standard loadware is active. (This is included |
| * source code, not a separate compilation module.) |
| * |
| *******************************************************************************/ |
| |
| //------------------------------------------------------------------------------ |
| // |
| // Revision History: |
| // |
| // 10 October 1991 MAG First Draft |
| // 7 November 1991 MAG Reflects additional commands. |
| // 24 February 1992 MAG Additional commands for 1.4.x loadware |
| // 11 March 1992 MAG Additional commands |
| // 30 March 1992 MAG Additional command: CMD_DSS_NOW |
| // 18 May 1992 MAG Discovered commands 39 & 40 must be at the end of a |
| // packet: affects implementation. |
| //------------------------------------------------------------------------------ |
| |
| //************ |
| //* Includes * |
| //************ |
| |
| #include "i2cmd.h" /* To get some bit-defines */ |
| |
| //------------------------------------------------------------------------------ |
| // Here is the table of global arrays which represent each type of command |
| // supported in the IntelliPort standard loadware. See also i2cmd.h |
| // for a more complete explanation of what is going on. |
| //------------------------------------------------------------------------------ |
| |
| // Here are the various globals: note that the names are not used except through |
| // the macros defined in i2cmd.h. Also note that although they are character |
| // arrays here (for extendability) they are cast to structure pointers in the |
| // i2cmd.h macros. See i2cmd.h for flags definitions. |
| |
| // Length Flags Command |
| static UCHAR ct02[] = { 1, BTH, 0x02 }; // DTR UP |
| static UCHAR ct03[] = { 1, BTH, 0x03 }; // DTR DN |
| static UCHAR ct04[] = { 1, BTH, 0x04 }; // RTS UP |
| static UCHAR ct05[] = { 1, BTH, 0x05 }; // RTS DN |
| static UCHAR ct06[] = { 1, BYP, 0x06 }; // START FL |
| static UCHAR ct07[] = { 2, BTH, 0x07,0 }; // BAUD |
| static UCHAR ct08[] = { 2, BTH, 0x08,0 }; // BITS |
| static UCHAR ct09[] = { 2, BTH, 0x09,0 }; // STOP |
| static UCHAR ct10[] = { 2, BTH, 0x0A,0 }; // PARITY |
| static UCHAR ct11[] = { 2, BTH, 0x0B,0 }; // XON |
| static UCHAR ct12[] = { 2, BTH, 0x0C,0 }; // XOFF |
| static UCHAR ct13[] = { 1, BTH, 0x0D }; // STOP FL |
| static UCHAR ct14[] = { 1, BYP|VIP, 0x0E }; // ACK HOTK |
| //static UCHAR ct15[]={ 2, BTH|VIP, 0x0F,0 }; // IRQ SET |
| static UCHAR ct16[] = { 2, INL, 0x10,0 }; // IXONOPTS |
| static UCHAR ct17[] = { 2, INL, 0x11,0 }; // OXONOPTS |
| static UCHAR ct18[] = { 1, INL, 0x12 }; // CTSENAB |
| static UCHAR ct19[] = { 1, BTH, 0x13 }; // CTSDSAB |
| static UCHAR ct20[] = { 1, INL, 0x14 }; // DCDENAB |
| static UCHAR ct21[] = { 1, BTH, 0x15 }; // DCDDSAB |
| static UCHAR ct22[] = { 1, BTH, 0x16 }; // DSRENAB |
| static UCHAR ct23[] = { 1, BTH, 0x17 }; // DSRDSAB |
| static UCHAR ct24[] = { 1, BTH, 0x18 }; // RIENAB |
| static UCHAR ct25[] = { 1, BTH, 0x19 }; // RIDSAB |
| static UCHAR ct26[] = { 2, BTH, 0x1A,0 }; // BRKENAB |
| static UCHAR ct27[] = { 1, BTH, 0x1B }; // BRKDSAB |
| //static UCHAR ct28[]={ 2, BTH, 0x1C,0 }; // MAXBLOKSIZE |
| //static UCHAR ct29[]={ 2, 0, 0x1D,0 }; // reserved |
| static UCHAR ct30[] = { 1, INL, 0x1E }; // CTSFLOWENAB |
| static UCHAR ct31[] = { 1, INL, 0x1F }; // CTSFLOWDSAB |
| static UCHAR ct32[] = { 1, INL, 0x20 }; // RTSFLOWENAB |
| static UCHAR ct33[] = { 1, INL, 0x21 }; // RTSFLOWDSAB |
| static UCHAR ct34[] = { 2, BTH, 0x22,0 }; // ISTRIPMODE |
| static UCHAR ct35[] = { 2, BTH|END, 0x23,0 }; // SENDBREAK |
| static UCHAR ct36[] = { 2, BTH, 0x24,0 }; // SETERRMODE |
| //static UCHAR ct36a[]={ 3, INL, 0x24,0,0 }; // SET_REPLACE |
| |
| // The following is listed for completeness, but should never be sent directly |
| // by user-level code. It is sent only by library routines in response to data |
| // movement. |
| //static UCHAR ct37[]={ 5, BYP|VIP, 0x25,0,0,0,0 }; // FLOW PACKET |
| |
| // Back to normal |
| //static UCHAR ct38[] = {11, BTH|VAR, 0x26,0,0,0,0,0,0,0,0,0,0 }; // DEF KEY SEQ |
| //static UCHAR ct39[]={ 3, BTH|END, 0x27,0,0 }; // OPOSTON |
| //static UCHAR ct40[]={ 1, BTH|END, 0x28 }; // OPOSTOFF |
| static UCHAR ct41[] = { 1, BYP, 0x29 }; // RESUME |
| //static UCHAR ct42[]={ 2, BTH, 0x2A,0 }; // TXBAUD |
| //static UCHAR ct43[]={ 2, BTH, 0x2B,0 }; // RXBAUD |
| //static UCHAR ct44[]={ 2, BTH, 0x2C,0 }; // MS PING |
| //static UCHAR ct45[]={ 1, BTH, 0x2D }; // HOTENAB |
| //static UCHAR ct46[]={ 1, BTH, 0x2E }; // HOTDSAB |
| //static UCHAR ct47[]={ 7, BTH, 0x2F,0,0,0,0,0,0 }; // UNIX FLAGS |
| //static UCHAR ct48[]={ 1, BTH, 0x30 }; // DSRFLOWENAB |
| //static UCHAR ct49[]={ 1, BTH, 0x31 }; // DSRFLOWDSAB |
| //static UCHAR ct50[]={ 1, BTH, 0x32 }; // DTRFLOWENAB |
| //static UCHAR ct51[]={ 1, BTH, 0x33 }; // DTRFLOWDSAB |
| //static UCHAR ct52[]={ 1, BTH, 0x34 }; // BAUDTABRESET |
| //static UCHAR ct53[] = { 3, BTH, 0x35,0,0 }; // BAUDREMAP |
| static UCHAR ct54[] = { 3, BTH, 0x36,0,0 }; // CUSTOMBAUD1 |
| static UCHAR ct55[] = { 3, BTH, 0x37,0,0 }; // CUSTOMBAUD2 |
| static UCHAR ct56[] = { 2, BTH|END, 0x38,0 }; // PAUSE |
| static UCHAR ct57[] = { 1, BYP, 0x39 }; // SUSPEND |
| static UCHAR ct58[] = { 1, BYP, 0x3A }; // UNSUSPEND |
| static UCHAR ct59[] = { 2, BTH, 0x3B,0 }; // PARITYCHK |
| static UCHAR ct60[] = { 1, INL|VIP, 0x3C }; // BOOKMARKREQ |
| //static UCHAR ct61[]={ 2, BTH, 0x3D,0 }; // INTERNALLOOP |
| //static UCHAR ct62[]={ 2, BTH, 0x3E,0 }; // HOTKTIMEOUT |
| static UCHAR ct63[] = { 2, INL, 0x3F,0 }; // SETTXON |
| static UCHAR ct64[] = { 2, INL, 0x40,0 }; // SETTXOFF |
| //static UCHAR ct65[]={ 2, BTH, 0x41,0 }; // SETAUTORTS |
| //static UCHAR ct66[]={ 2, BTH, 0x42,0 }; // SETHIGHWAT |
| //static UCHAR ct67[]={ 2, BYP, 0x43,0 }; // STARTSELFL |
| //static UCHAR ct68[]={ 2, INL, 0x44,0 }; // ENDSELFL |
| //static UCHAR ct69[]={ 1, BYP, 0x45 }; // HWFLOW_OFF |
| //static UCHAR ct70[]={ 1, BTH, 0x46 }; // ODSRFL_ENAB |
| //static UCHAR ct71[]={ 1, BTH, 0x47 }; // ODSRFL_DSAB |
| //static UCHAR ct72[]={ 1, BTH, 0x48 }; // ODCDFL_ENAB |
| //static UCHAR ct73[]={ 1, BTH, 0x49 }; // ODCDFL_DSAB |
| //static UCHAR ct74[]={ 2, BTH, 0x4A,0 }; // LOADLEVEL |
| //static UCHAR ct75[]={ 2, BTH, 0x4B,0 }; // STATDATA |
| //static UCHAR ct76[]={ 1, BYP, 0x4C }; // BREAK_ON |
| //static UCHAR ct77[]={ 1, BYP, 0x4D }; // BREAK_OFF |
| //static UCHAR ct78[]={ 1, BYP, 0x4E }; // GETFC |
| static UCHAR ct79[] = { 2, BYP, 0x4F,0 }; // XMIT_NOW |
| //static UCHAR ct80[]={ 4, BTH, 0x50,0,0,0 }; // DIVISOR_LATCH |
| //static UCHAR ct81[]={ 1, BYP, 0x51 }; // GET_STATUS |
| //static UCHAR ct82[]={ 1, BYP, 0x52 }; // GET_TXCNT |
| //static UCHAR ct83[]={ 1, BYP, 0x53 }; // GET_RXCNT |
| //static UCHAR ct84[]={ 1, BYP, 0x54 }; // GET_BOXIDS |
| //static UCHAR ct85[]={10, BYP, 0x55,0,0,0,0,0,0,0,0,0 }; // ENAB_MULT |
| //static UCHAR ct86[]={ 2, BTH, 0x56,0 }; // RCV_ENABLE |
| static UCHAR ct87[] = { 1, BYP, 0x57 }; // HW_TEST |
| //static UCHAR ct88[]={ 3, BTH, 0x58,0,0 }; // RCV_THRESHOLD |
| static UCHAR ct89[]={ 1, BYP, 0x59 }; // DSS_NOW |
| //static UCHAR ct90[]={ 3, BYP, 0x5A,0,0 }; // Set SILO |
| //static UCHAR ct91[]={ 2, BYP, 0x5B,0 }; // timed break |
| |
| // Some composite commands as well |
| //static UCHAR cc01[]={ 2, BTH, 0x02,0x04 }; // DTR & RTS UP |
| //static UCHAR cc02[]={ 2, BTH, 0x03,0x05 }; // DTR & RTS DN |
| |
| //******** |
| //* Code * |
| //******** |
| |
| //****************************************************************************** |
| // Function: i2cmdUnixFlags(iflag, cflag, lflag) |
| // Parameters: Unix tty flags |
| // |
| // Returns: Pointer to command structure |
| // |
| // Description: |
| // |
| // This routine sets the parameters of command 47 and returns a pointer to the |
| // appropriate structure. |
| //****************************************************************************** |
| #if 0 |
| cmdSyntaxPtr |
| i2cmdUnixFlags(unsigned short iflag,unsigned short cflag,unsigned short lflag) |
| { |
| cmdSyntaxPtr pCM = (cmdSyntaxPtr) ct47; |
| |
| pCM->cmd[1] = (unsigned char) iflag; |
| pCM->cmd[2] = (unsigned char) (iflag >> 8); |
| pCM->cmd[3] = (unsigned char) cflag; |
| pCM->cmd[4] = (unsigned char) (cflag >> 8); |
| pCM->cmd[5] = (unsigned char) lflag; |
| pCM->cmd[6] = (unsigned char) (lflag >> 8); |
| return pCM; |
| } |
| #endif /* 0 */ |
| |
| //****************************************************************************** |
| // Function: i2cmdBaudDef(which, rate) |
| // Parameters: ? |
| // |
| // Returns: Pointer to command structure |
| // |
| // Description: |
| // |
| // This routine sets the parameters of commands 54 or 55 (according to the |
| // argument which), and returns a pointer to the appropriate structure. |
| //****************************************************************************** |
| static cmdSyntaxPtr |
| i2cmdBaudDef(int which, unsigned short rate) |
| { |
| cmdSyntaxPtr pCM; |
| |
| switch(which) |
| { |
| case 1: |
| pCM = (cmdSyntaxPtr) ct54; |
| break; |
| default: |
| case 2: |
| pCM = (cmdSyntaxPtr) ct55; |
| break; |
| } |
| pCM->cmd[1] = (unsigned char) rate; |
| pCM->cmd[2] = (unsigned char) (rate >> 8); |
| return pCM; |
| } |
| |
