| // SPDX-License-Identifier: GPL-2.0-only |
| #include <linux/delay.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/i2c.h> |
| #include <linux/input.h> |
| #include <linux/input/mt.h> |
| #include <linux/input/touchscreen.h> |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/sizes.h> |
| #include <linux/slab.h> |
| #include <asm/unaligned.h> |
| |
| #define ILI2XXX_POLL_PERIOD 20 |
| |
| #define ILI210X_DATA_SIZE 64 |
| #define ILI211X_DATA_SIZE 43 |
| #define ILI251X_DATA_SIZE1 31 |
| #define ILI251X_DATA_SIZE2 20 |
| |
| /* Touchscreen commands */ |
| #define REG_TOUCHDATA 0x10 |
| #define REG_PANEL_INFO 0x20 |
| #define REG_CALIBRATE 0xcc |
| |
| struct ili2xxx_chip { |
| int (*read_reg)(struct i2c_client *client, u8 reg, |
| void *buf, size_t len); |
| int (*get_touch_data)(struct i2c_client *client, u8 *data); |
| bool (*parse_touch_data)(const u8 *data, unsigned int finger, |
| unsigned int *x, unsigned int *y); |
| bool (*continue_polling)(const u8 *data, bool touch); |
| unsigned int max_touches; |
| unsigned int resolution; |
| bool has_calibrate_reg; |
| }; |
| |
| struct ili210x { |
| struct i2c_client *client; |
| struct input_dev *input; |
| struct gpio_desc *reset_gpio; |
| struct touchscreen_properties prop; |
| const struct ili2xxx_chip *chip; |
| bool stop; |
| }; |
| |
| static int ili210x_read_reg(struct i2c_client *client, |
| u8 reg, void *buf, size_t len) |
| { |
| struct i2c_msg msg[] = { |
| { |
| .addr = client->addr, |
| .flags = 0, |
| .len = 1, |
| .buf = ®, |
| }, |
| { |
| .addr = client->addr, |
| .flags = I2C_M_RD, |
| .len = len, |
| .buf = buf, |
| } |
| }; |
| int error, ret; |
| |
| ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg)); |
| if (ret != ARRAY_SIZE(msg)) { |
| error = ret < 0 ? ret : -EIO; |
| dev_err(&client->dev, "%s failed: %d\n", __func__, error); |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| static int ili210x_read_touch_data(struct i2c_client *client, u8 *data) |
| { |
| return ili210x_read_reg(client, REG_TOUCHDATA, |
| data, ILI210X_DATA_SIZE); |
| } |
| |
| static bool ili210x_touchdata_to_coords(const u8 *touchdata, |
| unsigned int finger, |
| unsigned int *x, unsigned int *y) |
| { |
| if (touchdata[0] & BIT(finger)) |
| return false; |
| |
| *x = get_unaligned_be16(touchdata + 1 + (finger * 4) + 0); |
| *y = get_unaligned_be16(touchdata + 1 + (finger * 4) + 2); |
| |
| return true; |
| } |
| |
| static bool ili210x_check_continue_polling(const u8 *data, bool touch) |
| { |
| return data[0] & 0xf3; |
| } |
| |
| static const struct ili2xxx_chip ili210x_chip = { |
| .read_reg = ili210x_read_reg, |
| .get_touch_data = ili210x_read_touch_data, |
| .parse_touch_data = ili210x_touchdata_to_coords, |
| .continue_polling = ili210x_check_continue_polling, |
| .max_touches = 2, |
| .has_calibrate_reg = true, |
| }; |
| |
| static int ili211x_read_touch_data(struct i2c_client *client, u8 *data) |
| { |
| s16 sum = 0; |
| int error; |
| int ret; |
| int i; |
| |
| ret = i2c_master_recv(client, data, ILI211X_DATA_SIZE); |
| if (ret != ILI211X_DATA_SIZE) { |
| error = ret < 0 ? ret : -EIO; |
| dev_err(&client->dev, "%s failed: %d\n", __func__, error); |
| return error; |
| } |
| |
| /* This chip uses custom checksum at the end of data */ |
| for (i = 0; i < ILI211X_DATA_SIZE - 1; i++) |
| sum = (sum + data[i]) & 0xff; |
| |
| if ((-sum & 0xff) != data[ILI211X_DATA_SIZE - 1]) { |
| dev_err(&client->dev, |
| "CRC error (crc=0x%02x expected=0x%02x)\n", |
| sum, data[ILI211X_DATA_SIZE - 1]); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static bool ili211x_touchdata_to_coords(const u8 *touchdata, |
| unsigned int finger, |
| unsigned int *x, unsigned int *y) |
| { |
| u32 data; |
| |
| data = get_unaligned_be32(touchdata + 1 + (finger * 4) + 0); |
| if (data == 0xffffffff) /* Finger up */ |
| return false; |
| |
| *x = ((touchdata[1 + (finger * 4) + 0] & 0xf0) << 4) | |
| touchdata[1 + (finger * 4) + 1]; |
| *y = ((touchdata[1 + (finger * 4) + 0] & 0x0f) << 8) | |
| touchdata[1 + (finger * 4) + 2]; |
| |
| return true; |
| } |
| |
| static bool ili211x_decline_polling(const u8 *data, bool touch) |
| { |
| return false; |
| } |
| |
| static const struct ili2xxx_chip ili211x_chip = { |
| .read_reg = ili210x_read_reg, |
| .get_touch_data = ili211x_read_touch_data, |
| .parse_touch_data = ili211x_touchdata_to_coords, |
| .continue_polling = ili211x_decline_polling, |
| .max_touches = 10, |
| .resolution = 2048, |
| }; |
| |
| static int ili251x_read_reg(struct i2c_client *client, |
| u8 reg, void *buf, size_t len) |
| { |
| int error; |
| int ret; |
| |
| ret = i2c_master_send(client, ®, 1); |
| if (ret == 1) { |
| usleep_range(5000, 5500); |
| |
| ret = i2c_master_recv(client, buf, len); |
| if (ret == len) |
| return 0; |
| } |
| |
| error = ret < 0 ? ret : -EIO; |
| dev_err(&client->dev, "%s failed: %d\n", __func__, error); |
| return ret; |
| } |
| |
| static int ili251x_read_touch_data(struct i2c_client *client, u8 *data) |
| { |
| int error; |
| |
| error = ili251x_read_reg(client, REG_TOUCHDATA, |
| data, ILI251X_DATA_SIZE1); |
| if (!error && data[0] == 2) { |
| error = i2c_master_recv(client, data + ILI251X_DATA_SIZE1, |
| ILI251X_DATA_SIZE2); |
| if (error >= 0 && error != ILI251X_DATA_SIZE2) |
| error = -EIO; |
| } |
| |
| return error; |
| } |
| |
| static bool ili251x_touchdata_to_coords(const u8 *touchdata, |
| unsigned int finger, |
| unsigned int *x, unsigned int *y) |
| { |
| u16 val; |
| |
| val = get_unaligned_be16(touchdata + 1 + (finger * 5) + 0); |
| if (!(val & BIT(15))) /* Touch indication */ |
| return false; |
| |
| *x = val & 0x3fff; |
| *y = get_unaligned_be16(touchdata + 1 + (finger * 5) + 2); |
| |
| return true; |
| } |
| |
| static bool ili251x_check_continue_polling(const u8 *data, bool touch) |
| { |
| return touch; |
| } |
| |
| static const struct ili2xxx_chip ili251x_chip = { |
| .read_reg = ili251x_read_reg, |
| .get_touch_data = ili251x_read_touch_data, |
| .parse_touch_data = ili251x_touchdata_to_coords, |
| .continue_polling = ili251x_check_continue_polling, |
| .max_touches = 10, |
| .has_calibrate_reg = true, |
| }; |
| |
| static bool ili210x_report_events(struct ili210x *priv, u8 *touchdata) |
| { |
| struct input_dev *input = priv->input; |
| int i; |
| bool contact = false, touch; |
| unsigned int x = 0, y = 0; |
| |
| for (i = 0; i < priv->chip->max_touches; i++) { |
| touch = priv->chip->parse_touch_data(touchdata, i, &x, &y); |
| |
| input_mt_slot(input, i); |
| if (input_mt_report_slot_state(input, MT_TOOL_FINGER, touch)) { |
| touchscreen_report_pos(input, &priv->prop, x, y, true); |
| contact = true; |
| } |
| } |
| |
| input_mt_report_pointer_emulation(input, false); |
| input_sync(input); |
| |
| return contact; |
| } |
| |
| static irqreturn_t ili210x_irq(int irq, void *irq_data) |
| { |
| struct ili210x *priv = irq_data; |
| struct i2c_client *client = priv->client; |
| const struct ili2xxx_chip *chip = priv->chip; |
| u8 touchdata[ILI210X_DATA_SIZE] = { 0 }; |
| bool keep_polling; |
| bool touch; |
| int error; |
| |
| do { |
| error = chip->get_touch_data(client, touchdata); |
| if (error) { |
| dev_err(&client->dev, |
| "Unable to get touch data: %d\n", error); |
| break; |
| } |
| |
| touch = ili210x_report_events(priv, touchdata); |
| keep_polling = chip->continue_polling(touchdata, touch); |
| if (keep_polling) |
| msleep(ILI2XXX_POLL_PERIOD); |
| } while (!priv->stop && keep_polling); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static ssize_t ili210x_calibrate(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct ili210x *priv = i2c_get_clientdata(client); |
| unsigned long calibrate; |
| int rc; |
| u8 cmd = REG_CALIBRATE; |
| |
| if (kstrtoul(buf, 10, &calibrate)) |
| return -EINVAL; |
| |
| if (calibrate > 1) |
| return -EINVAL; |
| |
| if (calibrate) { |
| rc = i2c_master_send(priv->client, &cmd, sizeof(cmd)); |
| if (rc != sizeof(cmd)) |
| return -EIO; |
| } |
| |
| return count; |
| } |
| static DEVICE_ATTR(calibrate, S_IWUSR, NULL, ili210x_calibrate); |
| |
| static struct attribute *ili210x_attributes[] = { |
| &dev_attr_calibrate.attr, |
| NULL, |
| }; |
| |
| static umode_t ili210x_calibrate_visible(struct kobject *kobj, |
| struct attribute *attr, int index) |
| { |
| struct device *dev = kobj_to_dev(kobj); |
| struct i2c_client *client = to_i2c_client(dev); |
| struct ili210x *priv = i2c_get_clientdata(client); |
| |
| return priv->chip->has_calibrate_reg; |
| } |
| |
| static const struct attribute_group ili210x_attr_group = { |
| .attrs = ili210x_attributes, |
| .is_visible = ili210x_calibrate_visible, |
| }; |
| |
| static void ili210x_power_down(void *data) |
| { |
| struct gpio_desc *reset_gpio = data; |
| |
| gpiod_set_value_cansleep(reset_gpio, 1); |
| } |
| |
| static void ili210x_stop(void *data) |
| { |
| struct ili210x *priv = data; |
| |
| /* Tell ISR to quit even if there is a contact. */ |
| priv->stop = true; |
| } |
| |
| static int ili210x_i2c_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct device *dev = &client->dev; |
| const struct ili2xxx_chip *chip; |
| struct ili210x *priv; |
| struct gpio_desc *reset_gpio; |
| struct input_dev *input; |
| int error; |
| unsigned int max_xy; |
| |
| dev_dbg(dev, "Probing for ILI210X I2C Touschreen driver"); |
| |
| chip = device_get_match_data(dev); |
| if (!chip && id) |
| chip = (const struct ili2xxx_chip *)id->driver_data; |
| if (!chip) { |
| dev_err(&client->dev, "unknown device model\n"); |
| return -ENODEV; |
| } |
| |
| if (client->irq <= 0) { |
| dev_err(dev, "No IRQ!\n"); |
| return -EINVAL; |
| } |
| |
| reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); |
| if (IS_ERR(reset_gpio)) |
| return PTR_ERR(reset_gpio); |
| |
| if (reset_gpio) { |
| error = devm_add_action_or_reset(dev, ili210x_power_down, |
| reset_gpio); |
| if (error) |
| return error; |
| |
| usleep_range(50, 100); |
| gpiod_set_value_cansleep(reset_gpio, 0); |
| msleep(100); |
| } |
| |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| input = devm_input_allocate_device(dev); |
| if (!input) |
| return -ENOMEM; |
| |
| priv->client = client; |
| priv->input = input; |
| priv->reset_gpio = reset_gpio; |
| priv->chip = chip; |
| i2c_set_clientdata(client, priv); |
| |
| /* Setup input device */ |
| input->name = "ILI210x Touchscreen"; |
| input->id.bustype = BUS_I2C; |
| |
| /* Multi touch */ |
| max_xy = (chip->resolution ?: SZ_64K) - 1; |
| input_set_abs_params(input, ABS_MT_POSITION_X, 0, max_xy, 0, 0); |
| input_set_abs_params(input, ABS_MT_POSITION_Y, 0, max_xy, 0, 0); |
| touchscreen_parse_properties(input, true, &priv->prop); |
| |
| error = input_mt_init_slots(input, priv->chip->max_touches, |
| INPUT_MT_DIRECT); |
| if (error) { |
| dev_err(dev, "Unable to set up slots, err: %d\n", error); |
| return error; |
| } |
| |
| error = devm_request_threaded_irq(dev, client->irq, NULL, ili210x_irq, |
| IRQF_ONESHOT, client->name, priv); |
| if (error) { |
| dev_err(dev, "Unable to request touchscreen IRQ, err: %d\n", |
| error); |
| return error; |
| } |
| |
| error = devm_add_action_or_reset(dev, ili210x_stop, priv); |
| if (error) |
| return error; |
| |
| error = devm_device_add_group(dev, &ili210x_attr_group); |
| if (error) { |
| dev_err(dev, "Unable to create sysfs attributes, err: %d\n", |
| error); |
| return error; |
| } |
| |
| error = input_register_device(priv->input); |
| if (error) { |
| dev_err(dev, "Cannot register input device, err: %d\n", error); |
| return error; |
| } |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id ili210x_i2c_id[] = { |
| { "ili210x", (long)&ili210x_chip }, |
| { "ili2117", (long)&ili211x_chip }, |
| { "ili251x", (long)&ili251x_chip }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, ili210x_i2c_id); |
| |
| static const struct of_device_id ili210x_dt_ids[] = { |
| { .compatible = "ilitek,ili210x", .data = &ili210x_chip }, |
| { .compatible = "ilitek,ili2117", .data = &ili211x_chip }, |
| { .compatible = "ilitek,ili251x", .data = &ili251x_chip }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, ili210x_dt_ids); |
| |
| static struct i2c_driver ili210x_ts_driver = { |
| .driver = { |
| .name = "ili210x_i2c", |
| .of_match_table = ili210x_dt_ids, |
| }, |
| .id_table = ili210x_i2c_id, |
| .probe = ili210x_i2c_probe, |
| }; |
| |
| module_i2c_driver(ili210x_ts_driver); |
| |
| MODULE_AUTHOR("Olivier Sobrie <olivier@sobrie.be>"); |
| MODULE_DESCRIPTION("ILI210X I2C Touchscreen Driver"); |
| MODULE_LICENSE("GPL"); |