| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc. |
| * All rights reserved. |
| * |
| * File: wcmd.c |
| * |
| * Purpose: Handles the management command interface functions |
| * |
| * Author: Lyndon Chen |
| * |
| * Date: May 8, 2003 |
| * |
| * Functions: |
| * vnt_cmd_complete - Command Complete function |
| * vnt_schedule_command - Push Command and wait Command Scheduler to do |
| * vnt_cmd_timer_wait- Call back timer |
| * |
| * Revision History: |
| * |
| */ |
| |
| #include "device.h" |
| #include "mac.h" |
| #include "wcmd.h" |
| #include "power.h" |
| #include "usbpipe.h" |
| #include "rxtx.h" |
| #include "rf.h" |
| |
| static void vnt_cmd_timer_wait(struct vnt_private *priv, unsigned long msecs) |
| { |
| schedule_delayed_work(&priv->run_command_work, msecs_to_jiffies(msecs)); |
| } |
| |
| static int vnt_cmd_complete(struct vnt_private *priv) |
| { |
| priv->command_state = WLAN_CMD_IDLE; |
| if (priv->free_cmd_queue == CMD_Q_SIZE) { |
| /* Command Queue Empty */ |
| priv->cmd_running = false; |
| return true; |
| } |
| |
| priv->command = priv->cmd_queue[priv->cmd_dequeue_idx]; |
| |
| ADD_ONE_WITH_WRAP_AROUND(priv->cmd_dequeue_idx, CMD_Q_SIZE); |
| priv->free_cmd_queue++; |
| priv->cmd_running = true; |
| |
| switch (priv->command) { |
| case WLAN_CMD_INIT_MAC80211: |
| priv->command_state = WLAN_CMD_INIT_MAC80211_START; |
| break; |
| |
| case WLAN_CMD_TBTT_WAKEUP: |
| priv->command_state = WLAN_CMD_TBTT_WAKEUP_START; |
| break; |
| |
| case WLAN_CMD_BECON_SEND: |
| priv->command_state = WLAN_CMD_BECON_SEND_START; |
| break; |
| |
| case WLAN_CMD_SETPOWER: |
| priv->command_state = WLAN_CMD_SETPOWER_START; |
| break; |
| |
| case WLAN_CMD_CHANGE_ANTENNA: |
| priv->command_state = WLAN_CMD_CHANGE_ANTENNA_START; |
| break; |
| |
| default: |
| break; |
| } |
| |
| vnt_cmd_timer_wait(priv, 0); |
| |
| return true; |
| } |
| |
| void vnt_run_command(struct work_struct *work) |
| { |
| struct vnt_private *priv = |
| container_of(work, struct vnt_private, run_command_work.work); |
| |
| if (test_bit(DEVICE_FLAGS_DISCONNECTED, &priv->flags)) |
| return; |
| |
| if (!priv->cmd_running) |
| return; |
| |
| switch (priv->command_state) { |
| case WLAN_CMD_INIT_MAC80211_START: |
| if (priv->mac_hw) |
| break; |
| |
| dev_info(&priv->usb->dev, "Starting mac80211\n"); |
| |
| if (vnt_init(priv)) { |
| /* If fail all ends TODO retry */ |
| dev_err(&priv->usb->dev, "failed to start\n"); |
| ieee80211_free_hw(priv->hw); |
| return; |
| } |
| |
| break; |
| |
| case WLAN_CMD_TBTT_WAKEUP_START: |
| vnt_next_tbtt_wakeup(priv); |
| break; |
| |
| case WLAN_CMD_BECON_SEND_START: |
| if (!priv->vif) |
| break; |
| |
| vnt_beacon_make(priv, priv->vif); |
| |
| vnt_mac_reg_bits_on(priv, MAC_REG_TCR, TCR_AUTOBCNTX); |
| |
| break; |
| |
| case WLAN_CMD_SETPOWER_START: |
| |
| vnt_rf_setpower(priv, priv->current_rate, |
| priv->hw->conf.chandef.chan->hw_value); |
| |
| break; |
| |
| case WLAN_CMD_CHANGE_ANTENNA_START: |
| dev_dbg(&priv->usb->dev, "Change from Antenna%d to", |
| priv->rx_antenna_sel); |
| |
| if (priv->rx_antenna_sel == 0) { |
| priv->rx_antenna_sel = 1; |
| if (priv->tx_rx_ant_inv) |
| vnt_set_antenna_mode(priv, ANT_RXA); |
| else |
| vnt_set_antenna_mode(priv, ANT_RXB); |
| } else { |
| priv->rx_antenna_sel = 0; |
| if (priv->tx_rx_ant_inv) |
| vnt_set_antenna_mode(priv, ANT_RXB); |
| else |
| vnt_set_antenna_mode(priv, ANT_RXA); |
| } |
| break; |
| |
| default: |
| break; |
| } |
| |
| vnt_cmd_complete(priv); |
| } |
| |
| int vnt_schedule_command(struct vnt_private *priv, enum vnt_cmd command) |
| { |
| if (priv->free_cmd_queue == 0) |
| return false; |
| |
| priv->cmd_queue[priv->cmd_enqueue_idx] = command; |
| |
| ADD_ONE_WITH_WRAP_AROUND(priv->cmd_enqueue_idx, CMD_Q_SIZE); |
| priv->free_cmd_queue--; |
| |
| if (!priv->cmd_running) |
| vnt_cmd_complete(priv); |
| |
| return true; |
| } |
| |
| void vnt_reset_command_timer(struct vnt_private *priv) |
| { |
| priv->free_cmd_queue = CMD_Q_SIZE; |
| priv->cmd_dequeue_idx = 0; |
| priv->cmd_enqueue_idx = 0; |
| priv->command_state = WLAN_CMD_IDLE; |
| priv->cmd_running = false; |
| } |