| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * drivers/usb/misc/lvstest.c |
| * |
| * Test pattern generation for Link Layer Validation System Tests |
| * |
| * Copyright (C) 2014 ST Microelectronics |
| * Pratyush Anand <pratyush.anand@gmail.com> |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/slab.h> |
| #include <linux/usb.h> |
| #include <linux/usb/ch11.h> |
| #include <linux/usb/hcd.h> |
| #include <linux/usb/phy.h> |
| |
| struct lvs_rh { |
| /* root hub interface */ |
| struct usb_interface *intf; |
| /* if lvs device connected */ |
| bool present; |
| /* port no at which lvs device is present */ |
| int portnum; |
| /* urb buffer */ |
| u8 buffer[8]; |
| /* class descriptor */ |
| struct usb_hub_descriptor descriptor; |
| /* urb for polling interrupt pipe */ |
| struct urb *urb; |
| /* LVH RH work */ |
| struct work_struct rh_work; |
| /* RH port status */ |
| struct usb_port_status port_status; |
| }; |
| |
| static struct usb_device *create_lvs_device(struct usb_interface *intf) |
| { |
| struct usb_device *udev, *hdev; |
| struct usb_hcd *hcd; |
| struct lvs_rh *lvs = usb_get_intfdata(intf); |
| |
| if (!lvs->present) { |
| dev_err(&intf->dev, "No LVS device is present\n"); |
| return NULL; |
| } |
| |
| hdev = interface_to_usbdev(intf); |
| hcd = bus_to_hcd(hdev->bus); |
| |
| udev = usb_alloc_dev(hdev, hdev->bus, lvs->portnum); |
| if (!udev) { |
| dev_err(&intf->dev, "Could not allocate lvs udev\n"); |
| return NULL; |
| } |
| udev->speed = USB_SPEED_SUPER; |
| udev->ep0.desc.wMaxPacketSize = cpu_to_le16(512); |
| usb_set_device_state(udev, USB_STATE_DEFAULT); |
| |
| if (hcd->driver->enable_device) { |
| if (hcd->driver->enable_device(hcd, udev) < 0) { |
| dev_err(&intf->dev, "Failed to enable\n"); |
| usb_put_dev(udev); |
| return NULL; |
| } |
| } |
| |
| return udev; |
| } |
| |
| static void destroy_lvs_device(struct usb_device *udev) |
| { |
| struct usb_device *hdev = udev->parent; |
| struct usb_hcd *hcd = bus_to_hcd(hdev->bus); |
| |
| if (hcd->driver->free_dev) |
| hcd->driver->free_dev(hcd, udev); |
| |
| usb_put_dev(udev); |
| } |
| |
| static int lvs_rh_clear_port_feature(struct usb_device *hdev, |
| int port1, int feature) |
| { |
| return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), |
| USB_REQ_CLEAR_FEATURE, USB_RT_PORT, feature, port1, |
| NULL, 0, 1000); |
| } |
| |
| static int lvs_rh_set_port_feature(struct usb_device *hdev, |
| int port1, int feature) |
| { |
| return usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0), |
| USB_REQ_SET_FEATURE, USB_RT_PORT, feature, port1, |
| NULL, 0, 1000); |
| } |
| |
| static ssize_t u3_entry_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| struct usb_interface *intf = to_usb_interface(dev); |
| struct usb_device *hdev = interface_to_usbdev(intf); |
| struct lvs_rh *lvs = usb_get_intfdata(intf); |
| struct usb_device *udev; |
| int ret; |
| |
| udev = create_lvs_device(intf); |
| if (!udev) { |
| dev_err(dev, "failed to create lvs device\n"); |
| return -ENOMEM; |
| } |
| |
| ret = lvs_rh_set_port_feature(hdev, lvs->portnum, |
| USB_PORT_FEAT_SUSPEND); |
| if (ret < 0) |
| dev_err(dev, "can't issue U3 entry %d\n", ret); |
| |
| destroy_lvs_device(udev); |
| |
| if (ret < 0) |
| return ret; |
| |
| return count; |
| } |
| static DEVICE_ATTR_WO(u3_entry); |
| |
| static ssize_t u3_exit_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| struct usb_interface *intf = to_usb_interface(dev); |
| struct usb_device *hdev = interface_to_usbdev(intf); |
| struct lvs_rh *lvs = usb_get_intfdata(intf); |
| struct usb_device *udev; |
| int ret; |
| |
| udev = create_lvs_device(intf); |
| if (!udev) { |
| dev_err(dev, "failed to create lvs device\n"); |
| return -ENOMEM; |
| } |
| |
| ret = lvs_rh_clear_port_feature(hdev, lvs->portnum, |
| USB_PORT_FEAT_SUSPEND); |
| if (ret < 0) |
| dev_err(dev, "can't issue U3 exit %d\n", ret); |
| |
| destroy_lvs_device(udev); |
| |
| if (ret < 0) |
| return ret; |
| |
| return count; |
| } |
| static DEVICE_ATTR_WO(u3_exit); |
| |
| static ssize_t hot_reset_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| struct usb_interface *intf = to_usb_interface(dev); |
| struct usb_device *hdev = interface_to_usbdev(intf); |
| struct lvs_rh *lvs = usb_get_intfdata(intf); |
| int ret; |
| |
| ret = lvs_rh_set_port_feature(hdev, lvs->portnum, |
| USB_PORT_FEAT_RESET); |
| if (ret < 0) { |
| dev_err(dev, "can't issue hot reset %d\n", ret); |
| return ret; |
| } |
| |
| return count; |
| } |
| static DEVICE_ATTR_WO(hot_reset); |
| |
| static ssize_t warm_reset_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| struct usb_interface *intf = to_usb_interface(dev); |
| struct usb_device *hdev = interface_to_usbdev(intf); |
| struct lvs_rh *lvs = usb_get_intfdata(intf); |
| int ret; |
| |
| ret = lvs_rh_set_port_feature(hdev, lvs->portnum, |
| USB_PORT_FEAT_BH_PORT_RESET); |
| if (ret < 0) { |
| dev_err(dev, "can't issue warm reset %d\n", ret); |
| return ret; |
| } |
| |
| return count; |
| } |
| static DEVICE_ATTR_WO(warm_reset); |
| |
| static ssize_t u2_timeout_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| struct usb_interface *intf = to_usb_interface(dev); |
| struct usb_device *hdev = interface_to_usbdev(intf); |
| struct lvs_rh *lvs = usb_get_intfdata(intf); |
| unsigned long val; |
| int ret; |
| |
| ret = kstrtoul(buf, 10, &val); |
| if (ret < 0) { |
| dev_err(dev, "couldn't parse string %d\n", ret); |
| return ret; |
| } |
| |
| if (val > 127) |
| return -EINVAL; |
| |
| ret = lvs_rh_set_port_feature(hdev, lvs->portnum | (val << 8), |
| USB_PORT_FEAT_U2_TIMEOUT); |
| if (ret < 0) { |
| dev_err(dev, "Error %d while setting U2 timeout %ld\n", ret, val); |
| return ret; |
| } |
| |
| return count; |
| } |
| static DEVICE_ATTR_WO(u2_timeout); |
| |
| static ssize_t u1_timeout_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| struct usb_interface *intf = to_usb_interface(dev); |
| struct usb_device *hdev = interface_to_usbdev(intf); |
| struct lvs_rh *lvs = usb_get_intfdata(intf); |
| unsigned long val; |
| int ret; |
| |
| ret = kstrtoul(buf, 10, &val); |
| if (ret < 0) { |
| dev_err(dev, "couldn't parse string %d\n", ret); |
| return ret; |
| } |
| |
| if (val > 127) |
| return -EINVAL; |
| |
| ret = lvs_rh_set_port_feature(hdev, lvs->portnum | (val << 8), |
| USB_PORT_FEAT_U1_TIMEOUT); |
| if (ret < 0) { |
| dev_err(dev, "Error %d while setting U1 timeout %ld\n", ret, val); |
| return ret; |
| } |
| |
| return count; |
| } |
| static DEVICE_ATTR_WO(u1_timeout); |
| |
| static ssize_t get_dev_desc_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| struct usb_interface *intf = to_usb_interface(dev); |
| struct usb_device *udev; |
| struct usb_device_descriptor *descriptor; |
| int ret; |
| |
| descriptor = kmalloc(sizeof(*descriptor), GFP_KERNEL); |
| if (!descriptor) |
| return -ENOMEM; |
| |
| udev = create_lvs_device(intf); |
| if (!udev) { |
| dev_err(dev, "failed to create lvs device\n"); |
| ret = -ENOMEM; |
| goto free_desc; |
| } |
| |
| ret = usb_control_msg(udev, (PIPE_CONTROL << 30) | USB_DIR_IN, |
| USB_REQ_GET_DESCRIPTOR, USB_DIR_IN, USB_DT_DEVICE << 8, |
| 0, descriptor, sizeof(*descriptor), |
| USB_CTRL_GET_TIMEOUT); |
| if (ret < 0) |
| dev_err(dev, "can't read device descriptor %d\n", ret); |
| |
| destroy_lvs_device(udev); |
| |
| free_desc: |
| kfree(descriptor); |
| |
| if (ret < 0) |
| return ret; |
| |
| return count; |
| } |
| static DEVICE_ATTR_WO(get_dev_desc); |
| |
| static ssize_t enable_compliance_store(struct device *dev, |
| struct device_attribute *attr, const char *buf, size_t count) |
| { |
| struct usb_interface *intf = to_usb_interface(dev); |
| struct usb_device *hdev = interface_to_usbdev(intf); |
| struct lvs_rh *lvs = usb_get_intfdata(intf); |
| int ret; |
| |
| ret = lvs_rh_set_port_feature(hdev, |
| lvs->portnum | USB_SS_PORT_LS_COMP_MOD << 3, |
| USB_PORT_FEAT_LINK_STATE); |
| if (ret < 0) { |
| dev_err(dev, "can't enable compliance mode %d\n", ret); |
| return ret; |
| } |
| |
| return count; |
| } |
| static DEVICE_ATTR_WO(enable_compliance); |
| |
| static struct attribute *lvs_attrs[] = { |
| &dev_attr_get_dev_desc.attr, |
| &dev_attr_u1_timeout.attr, |
| &dev_attr_u2_timeout.attr, |
| &dev_attr_hot_reset.attr, |
| &dev_attr_warm_reset.attr, |
| &dev_attr_u3_entry.attr, |
| &dev_attr_u3_exit.attr, |
| &dev_attr_enable_compliance.attr, |
| NULL |
| }; |
| ATTRIBUTE_GROUPS(lvs); |
| |
| static void lvs_rh_work(struct work_struct *work) |
| { |
| struct lvs_rh *lvs = container_of(work, struct lvs_rh, rh_work); |
| struct usb_interface *intf = lvs->intf; |
| struct usb_device *hdev = interface_to_usbdev(intf); |
| struct usb_hcd *hcd = bus_to_hcd(hdev->bus); |
| struct usb_hub_descriptor *descriptor = &lvs->descriptor; |
| struct usb_port_status *port_status = &lvs->port_status; |
| int i, ret = 0; |
| u16 portchange; |
| |
| /* Examine each root port */ |
| for (i = 1; i <= descriptor->bNbrPorts; i++) { |
| ret = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0), |
| USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT, 0, i, |
| port_status, sizeof(*port_status), 1000); |
| if (ret < 4) |
| continue; |
| |
| portchange = le16_to_cpu(port_status->wPortChange); |
| |
| if (portchange & USB_PORT_STAT_C_LINK_STATE) |
| lvs_rh_clear_port_feature(hdev, i, |
| USB_PORT_FEAT_C_PORT_LINK_STATE); |
| if (portchange & USB_PORT_STAT_C_ENABLE) |
| lvs_rh_clear_port_feature(hdev, i, |
| USB_PORT_FEAT_C_ENABLE); |
| if (portchange & USB_PORT_STAT_C_RESET) |
| lvs_rh_clear_port_feature(hdev, i, |
| USB_PORT_FEAT_C_RESET); |
| if (portchange & USB_PORT_STAT_C_BH_RESET) |
| lvs_rh_clear_port_feature(hdev, i, |
| USB_PORT_FEAT_C_BH_PORT_RESET); |
| if (portchange & USB_PORT_STAT_C_CONNECTION) { |
| lvs_rh_clear_port_feature(hdev, i, |
| USB_PORT_FEAT_C_CONNECTION); |
| |
| if (le16_to_cpu(port_status->wPortStatus) & |
| USB_PORT_STAT_CONNECTION) { |
| lvs->present = true; |
| lvs->portnum = i; |
| if (hcd->usb_phy) |
| usb_phy_notify_connect(hcd->usb_phy, |
| USB_SPEED_SUPER); |
| } else { |
| lvs->present = false; |
| if (hcd->usb_phy) |
| usb_phy_notify_disconnect(hcd->usb_phy, |
| USB_SPEED_SUPER); |
| } |
| break; |
| } |
| } |
| |
| ret = usb_submit_urb(lvs->urb, GFP_KERNEL); |
| if (ret != 0 && ret != -ENODEV && ret != -EPERM) |
| dev_err(&intf->dev, "urb resubmit error %d\n", ret); |
| } |
| |
| static void lvs_rh_irq(struct urb *urb) |
| { |
| struct lvs_rh *lvs = urb->context; |
| |
| schedule_work(&lvs->rh_work); |
| } |
| |
| static int lvs_rh_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| struct usb_device *hdev; |
| struct usb_host_interface *desc; |
| struct usb_endpoint_descriptor *endpoint; |
| struct lvs_rh *lvs; |
| unsigned int pipe; |
| int ret, maxp; |
| |
| hdev = interface_to_usbdev(intf); |
| desc = intf->cur_altsetting; |
| |
| ret = usb_find_int_in_endpoint(desc, &endpoint); |
| if (ret) |
| return ret; |
| |
| /* valid only for SS root hub */ |
| if (hdev->descriptor.bDeviceProtocol != USB_HUB_PR_SS || hdev->parent) { |
| dev_err(&intf->dev, "Bind LVS driver with SS root Hub only\n"); |
| return -EINVAL; |
| } |
| |
| lvs = devm_kzalloc(&intf->dev, sizeof(*lvs), GFP_KERNEL); |
| if (!lvs) |
| return -ENOMEM; |
| |
| lvs->intf = intf; |
| usb_set_intfdata(intf, lvs); |
| |
| /* how many number of ports this root hub has */ |
| ret = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0), |
| USB_REQ_GET_DESCRIPTOR, USB_DIR_IN | USB_RT_HUB, |
| USB_DT_SS_HUB << 8, 0, &lvs->descriptor, |
| USB_DT_SS_HUB_SIZE, USB_CTRL_GET_TIMEOUT); |
| if (ret < (USB_DT_HUB_NONVAR_SIZE + 2)) { |
| dev_err(&hdev->dev, "wrong root hub descriptor read %d\n", ret); |
| return ret; |
| } |
| |
| /* submit urb to poll interrupt endpoint */ |
| lvs->urb = usb_alloc_urb(0, GFP_KERNEL); |
| if (!lvs->urb) |
| return -ENOMEM; |
| |
| INIT_WORK(&lvs->rh_work, lvs_rh_work); |
| |
| pipe = usb_rcvintpipe(hdev, endpoint->bEndpointAddress); |
| maxp = usb_maxpacket(hdev, pipe, usb_pipeout(pipe)); |
| usb_fill_int_urb(lvs->urb, hdev, pipe, &lvs->buffer[0], maxp, |
| lvs_rh_irq, lvs, endpoint->bInterval); |
| |
| ret = usb_submit_urb(lvs->urb, GFP_KERNEL); |
| if (ret < 0) { |
| dev_err(&intf->dev, "couldn't submit lvs urb %d\n", ret); |
| goto free_urb; |
| } |
| |
| return ret; |
| |
| free_urb: |
| usb_free_urb(lvs->urb); |
| return ret; |
| } |
| |
| static void lvs_rh_disconnect(struct usb_interface *intf) |
| { |
| struct lvs_rh *lvs = usb_get_intfdata(intf); |
| |
| usb_poison_urb(lvs->urb); /* used in scheduled work */ |
| flush_work(&lvs->rh_work); |
| usb_free_urb(lvs->urb); |
| } |
| |
| static struct usb_driver lvs_driver = { |
| .name = "lvs", |
| .probe = lvs_rh_probe, |
| .disconnect = lvs_rh_disconnect, |
| .dev_groups = lvs_groups, |
| }; |
| |
| module_usb_driver(lvs_driver); |
| |
| MODULE_DESCRIPTION("Link Layer Validation System Driver"); |
| MODULE_LICENSE("GPL"); |