| * MediaTek's I2C controller |
| |
| The MediaTek's I2C controller is used to interface with I2C devices. |
| |
| Required properties: |
| - compatible: value should be either of the following. |
| "mediatek,mt2701-i2c", "mediatek,mt6577-i2c": for MediaTek MT2701 |
| "mediatek,mt2712-i2c": for MediaTek MT2712 |
| "mediatek,mt6577-i2c": for MediaTek MT6577 |
| "mediatek,mt6589-i2c": for MediaTek MT6589 |
| "mediatek,mt6797-i2c", "mediatek,mt6577-i2c": for MediaTek MT6797 |
| "mediatek,mt7622-i2c": for MediaTek MT7622 |
| "mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for MediaTek MT7623 |
| "mediatek,mt7629-i2c", "mediatek,mt2712-i2c": for MediaTek MT7629 |
| "mediatek,mt8173-i2c": for MediaTek MT8173 |
| "mediatek,mt8183-i2c": for MediaTek MT8183 |
| "mediatek,mt8192-i2c": for MediaTek MT8192 |
| "mediatek,mt8516-i2c", "mediatek,mt2712-i2c": for MediaTek MT8516 |
| - reg: physical base address of the controller and dma base, length of memory |
| mapped region. |
| - interrupts: interrupt number to the cpu. |
| - clock-div: the fixed value for frequency divider of clock source in i2c |
| module. Each IC may be different. |
| - clocks: clock name from clock manager |
| - clock-names: Must include "main" and "dma", "arb" is for multi-master that |
| one bus has more than two i2c controllers, if enable have-pmic need include |
| "pmic" extra. |
| |
| Optional properties: |
| - clock-frequency: Frequency in Hz of the bus when transfer, the default value |
| is 100000. |
| - mediatek,have-pmic: platform can control i2c form special pmic side. |
| Only mt6589 and mt8135 support this feature. |
| - mediatek,use-push-pull: IO config use push-pull mode. |
| |
| Example: |
| |
| i2c0: i2c@1100d000 { |
| compatible = "mediatek,mt6577-i2c"; |
| reg = <0x1100d000 0x70>, |
| <0x11000300 0x80>; |
| interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>; |
| clock-frequency = <400000>; |
| mediatek,have-pmic; |
| clock-div = <16>; |
| clocks = <&i2c0_ck>, <&ap_dma_ck>; |
| clock-names = "main", "dma"; |
| }; |
| |
