arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright 2020, Compass Electronics Group, LLC
  */

 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>

 / {
 	backlight_lvds: backlight-lvds {
 		compatible = "pwm-backlight";
 		power-supply = <&reg_lcd>;
 		enable-gpios = <&gpio_exp1 3 GPIO_ACTIVE_LOW>;
 		pwms = <&pwm2 0 50000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 	};

 	backlight_rgb: backlight-rgb {
 		compatible = "pwm-backlight";
 		power-supply = <&reg_lcd>;
 		enable-gpios = <&gpio_exp1 7 GPIO_ACTIVE_LOW>;
 		pwms = <&pwm0 0 50000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 	};

 	hdmi0-out {
 		compatible = "hdmi-connector";
 		type = "a";

 		port {
 			hdmi0_con: endpoint {
 				remote-endpoint = <&rcar_dw_hdmi0_out>;
 			};
 		};
 	};

 	keys {
 		compatible = "gpio-keys";

 		key-1 {
 			gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_1>;
 			label = "Switch-1";
 			wakeup-source;
 			debounce-interval = <20>;
 		};
 		key-2 {
 			gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_2>;
 			label = "Switch-2";
 			wakeup-source;
 			debounce-interval = <20>;
 		};
 		key-3 {
 			gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_3>;
 			label = "Switch-3";
 			wakeup-source;
 			debounce-interval = <20>;
 		};
 		key-4 {
 			gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_4>;
 			label = "Switch-4";
 			wakeup-source;
 			debounce-interval = <20>;
 		};
 		key-5 {
 			gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_5>;
 			label = "Switch-4";
 			wakeup-source;
 			debounce-interval = <20>;
 		};
 	};

 	leds {
 		compatible = "gpio-leds";
 		pinctrl-0 = <&led_pins>;
 		pinctrl-names = "default";

 		led0 {
 			gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
 			label = "LED0";
 			linux,default-trigger = "heartbeat";
 		};
 		led1 {
 			gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
 			label = "LED1";
 		};
 		led2 {
 			gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 			label = "LED2";
 		};
 		led3 {
 			gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
 			label = "LED3";
 		};
 	};

 	lvds {
 		compatible = "panel-lvds";
 		power-supply = <&reg_lcd_reset>;
 		width-mm = <223>;
 		height-mm = <125>;
 		backlight = <&backlight_lvds>;
 		data-mapping = "vesa-24";

 		panel-timing {
 			/* 800x480@60Hz */
 			clock-frequency = <30000000>;
 			hactive = <800>;
 			vactive = <480>;
 			hsync-len = <48>;
 			hfront-porch = <40>;
 			hback-porch = <40>;
 			vfront-porch = <13>;
 			vback-porch = <29>;
 			vsync-len = <3>;
 			hsync-active = <1>;
 			vsync-active = <1>;
 			de-active = <1>;
 			pixelclk-active = <0>;
 		};

 		port {
 			panel_in: endpoint {
 				remote-endpoint = <&lvds0_out>;
 			};
 		};
 	};

 	rgb {
 		/* Different LCD with compatible timings */
 		compatible = "rocktech,rk070er9427";
 		backlight = <&backlight_rgb>;
 		enable-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
 		power-supply = <&reg_lcd>;
 		port {
 			rgb_panel: endpoint {
 				remote-endpoint = <&du_out_rgb>;
 			};
 		};
 	};

 	reg_audio: regulator_audio {
 		compatible = "regulator-fixed";
 		regulator-name = "audio-1.8V";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 		gpio = <&gpio_exp2 7 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};

 	reg_lcd: regulator-lcd {
 		compatible = "regulator-fixed";
 		regulator-name = "lcd_panel_pwr";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio_exp1 1 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};

 	reg_lcd_reset: regulator-lcd-reset {
 		compatible = "regulator-fixed";
 		regulator-name = "nLCD_RESET";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio5 3 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		vin-supply = <&reg_lcd>;
 	};

 	reg_cam0: regulator_camera {
 		compatible = "regulator-fixed";
 		regulator-name = "reg_cam0";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 		gpio = <&gpio_exp2 2 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 	};

 	reg_cam1: regulator_camera {
 		compatible = "regulator-fixed";
 		regulator-name = "reg_cam1";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 		gpio = <&gpio_exp2 5 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		startup-delay-us = <100000>;
 	};

 	sound_card {
 		compatible = "audio-graph-card";
 		label = "rcar-sound";
 		dais = <&rsnd_port0>, <&rsnd_port1>;
 	};

 	vccq_sdhi0: regulator-vccq-sdhi0 {
 		compatible = "regulator-gpio";

 		regulator-name = "SDHI0 VccQ";
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;

 		gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
 		states = <3300000 1>, <1800000 0>;
 		regulator-always-on;
 	};

 	/* External DU dot clocks */
 	x302_clk: x302-clock {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <33000000>;
 	};

 	x304_clk: x304-clock {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <25000000>;
 	};
 };

 &audio_clk_a {
 	clock-frequency = <24576000>;
 	assigned-clocks = <&versaclock6_bb 4>;
 	assigned-clock-rates = <24576000>;
 };

 &audio_clk_b {
 	clock-frequency = <22579200>;
 };

 &can0 {
 	pinctrl-0 = <&can0_pins>;
 	pinctrl-names = "default";
 	renesas,can-clock-select = <0x0>;
 	status = "okay";
 };

 &can1 {
 	pinctrl-0 = <&can1_pins>;
 	pinctrl-names = "default";
 	renesas,can-clock-select = <0x0>;
 	status = "okay";
 };

 &du {
 	pinctrl-0 = <&du_pins>;
 	pinctrl-names = "default";
 	status = "okay";

 	clocks = <&cpg CPG_MOD 724>,
 		<&cpg CPG_MOD 723>,
 		<&cpg CPG_MOD 722>,
 		<&versaclock5 1>,
 		<&x302_clk>,
 		<&versaclock5 2>;
 	clock-names = "du.0", "du.1", "du.2",
 		"dclkin.0", "dclkin.1", "dclkin.2";
 };

 &du_out_rgb {
 	remote-endpoint = <&rgb_panel>;
 };

 &ehci0 {
 	dr_mode = "otg";
 	status = "okay";
 	clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
 };

 &ehci1 {
 	status = "okay";
 	clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
 };

 &hdmi0 {
 	status = "okay";
 	ports {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		port@0 {
 			reg = <0>;
 			dw_hdmi0_in: endpoint {
 				remote-endpoint = <&du_out_hdmi0>;
 			};
 		};
 		port@1 {
 			reg = <1>;
 			rcar_dw_hdmi0_out: endpoint {
 				remote-endpoint = <&hdmi0_con>;
 			};
 		};
 		port@2 {
 			reg = <2>;
 			dw_hdmi0_snd_in: endpoint {
 				remote-endpoint = <&rsnd_endpoint1>;
 			};
 		};
 	};
 };

 &hscif1 {
 	pinctrl-0 = <&hscif1_pins>;
 	pinctrl-names = "default";
 	uart-has-rtscts;
 	status = "okay";
 };

 &hsusb {
 	dr_mode = "otg";
 	status = "okay";
 };

 &i2c2 {
 	status = "okay";
 	clock-frequency = <100000>;
 	pinctrl-0 = <&i2c2_pins>;
 	pinctrl-names = "default";

 	gpio_exp2: gpio@21 {
 		compatible = "onnn,pca9654";
 		reg = <0x21>;
 		gpio-controller;
 		#gpio-cells = <2>;
 	};

 	gpio_exp3: gpio@22 {
 		compatible = "onnn,pca9654";
 		reg = <0x22>;
 		gpio-controller;
 		#gpio-cells = <2>;
 	};

 	gpio_exp4: gpio@23 {
 		compatible = "onnn,pca9654";
 		reg = <0x23>;
 		gpio-controller;
 		#gpio-cells = <2>;
 	};

 	versaclock6_bb: clock-controller@6a {
 		compatible = "idt,5p49v6965";
 		reg = <0x6a>;
 		#clock-cells = <1>;
 		clocks = <&x304_clk>;
 		clock-names = "xin";
 		/* CSI0_MCLK, CSI1_MCLK, AUDIO_CLKIN, USB_HUB_MCLK_BB */
 		assigned-clocks = <&versaclock6_bb 1>,
 				   <&versaclock6_bb 2>,
 				   <&versaclock6_bb 3>,
 				   <&versaclock6_bb 4>;
 		assigned-clock-rates =	<24000000>, <24000000>, <24000000>, <24576000>;
 	};
 };

 &i2c0 {
 	status = "okay";
 	clock-frequency = <400000>;

 	pinctrl-0 = <&i2c0_pins>;
 	pinctrl-names = "default";
 };

 &i2c5 {
 	status = "okay";
 	clock-frequency = <100000>;
 	pinctrl-0 = <&i2c5_pins>;
 	pinctrl-names = "default";

 	codec: wm8962@1a {
 		compatible = "wlf,wm8962";
 		reg = <0x1a>;
 		DCVDD-supply = <&reg_audio>;
 		DBVDD-supply = <&reg_audio>;
 		AVDD-supply = <&reg_audio>;
 		CPVDD-supply = <&reg_audio>;
 		MICVDD-supply = <&reg_audio>;
 		PLLVDD-supply = <&reg_audio>;
 		SPKVDD1-supply = <&reg_audio>;
 		SPKVDD2-supply = <&reg_audio>;
 		gpio-cfg = <
 			0x0000 /* 0:Default */
 			0x0000 /* 1:Default */
 			0x0000 /* 2:Default */
 			0x0000 /* 3:Default */
 			0x0000 /* 4:Default */
 			0x0000 /* 5:Default */
 		>;
 		port {
 			wm8962_endpoint: endpoint {
 				remote-endpoint = <&rsnd_endpoint0>;
 			};
 		};
 	};

 	/* 0 - lcd_reset */
 	/* 1 - lcd_pwr */
 	/* 2 - lcd_select */
 	/* 3 - backlight-enable */
 	/* 4 - Touch_shdwn */
 	/* 5 - LCD_H_pol */
 	/* 6 - lcd_V_pol */
 	gpio_exp1: gpio@20 {
 		compatible = "onnn,pca9654";
 		reg = <0x20>;
 		gpio-controller;
 		#gpio-cells = <2>;
 	};

 	touchscreen@26 {
 		compatible = "ilitek,ili2117";
 		reg = <0x26>;
 		interrupt-parent = <&gpio5>;
 		interrupts = <9 IRQ_TYPE_EDGE_RISING>;
 		wakeup-source;
 	};

 	hd3ss3220@47 {
 		compatible = "ti,hd3ss3220";
 		reg = <0x47>;
 		interrupt-parent = <&gpio6>;
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;

 		connector {
 			compatible = "usb-c-connector";
 			label = "USB-C";
 			data-role = "dual";

 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;

 				port@1 {
 					reg = <1>;
 					hd3ss3220_ep: endpoint {
 						remote-endpoint = <&usb3_role_switch>;
 					};
 				};
 			};
 		};
 	};
 };

 &lvds0 {
 	status = "okay";

 	ports {
 		port@1 {
 			lvds0_out: endpoint {
 				remote-endpoint = <&panel_in>;
 			};
 		};
 	};
 };

 &ohci0 {
 	dr_mode = "otg";
 	status = "okay";
 };

 &ohci1 {
 	status = "okay";
 };

 &pciec0 {
 	status = "okay";
 };

 &pciec1 {
 	status = "okay";
 };

 &pcie_bus_clk {
 	clock-frequency = <100000000>;
 };

 &pfc {
 	can0_pins: can0 {
 		groups = "can0_data_a";
 		function = "can0";
 	};

 	can1_pins: can1 {
 		groups = "can1_data";
 		function = "can1";
 	};

 	du_pins: du {
 		groups = "du_rgb888", "du_sync", "du_clk_out_1", "du_disp";
 		function = "du";
 	};

 	i2c2_pins: i2c2 {
 		groups = "i2c2_a";
 		function = "i2c2";
 	};

 	i2c5_pins: i2c5 {
 		groups = "i2c5";
 		function = "i2c5";
 	};

 	led_pins: leds {
 		/* GP_0_4 , AVS1, AVS2, GP_7_3 */
 		pins = "GP_0_4", "GP_7_0", "GP_7_1", "GP_7_3";
 		bias-pull-down;
 	};

 	pwm0_pins: pwm0 {
 		groups = "pwm0";
 		function = "pwm0";
 	};

 	pwm2_pins: pwm2 {
 		groups = "pwm2_a";
 		function = "pwm2_a";
 	};

 	sdhi0_pins: sd0 {
 		groups = "sdhi0_data4", "sdhi0_ctrl";
 		function = "sdhi0";
 		power-source = <3300>;
 	};

 	sdhi0_pins_uhs: sd0_uhs {
 		groups = "sdhi0_data4", "sdhi0_ctrl";
 		function = "sdhi0";
 		power-source = <1800>;
 	};

 	sound_pins: sound {
 		groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
 		function = "ssi";
 	};

 	sound_clk_pins: sound_clk {
 		groups = "audio_clk_a_a";
 		function = "audio_clk";
 	};

 	usb0_pins: usb0 {
 		mux {
 			groups = "usb0";
 			function = "usb0";
 		};
 	};

 	usb1_pins: usb1 {
 		mux {
 			groups = "usb1";
 			function = "usb1";
 		};
 	};

 	usb30_pins: usb30 {
 		mux {
 			groups = "usb30";
 			function = "usb30";
 		};
 	};
 };

 &pwm0 {
 	pinctrl-0 = <&pwm0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
 };

 &pwm2 {
 	pinctrl-0 = <&pwm2_pins>;
 	pinctrl-names = "default";
 	status = "okay";
 };

 &rcar_sound {
 	pinctrl-0 = <&sound_pins &sound_clk_pins>;
 	pinctrl-names = "default";

 	/* Single DAI */
 	#sound-dai-cells = <0>;

 	/* audio_clkout0/1/2/3 */
 	#clock-cells = <1>;
 	clock-frequency = <11289600>;

 	status = "okay";

 	clocks = <&cpg CPG_MOD 1005>,
 		 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
 		 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
 		 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
 		 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
 		 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
 		 <&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
 		 <&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
 		 <&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
 		 <&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
 		 <&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
 		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
 		 <&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
 		 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
 		 <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>,
 		 <&cpg CPG_CORE R8A774A1_CLK_S0D4>;

 	ports {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		rsnd_port0: port@0 {
 			reg = <0>;
 			rsnd_endpoint0: endpoint {
 				remote-endpoint = <&wm8962_endpoint>;

 				dai-format = "i2s";
 				bitclock-master = <&rsnd_endpoint0>;
 				frame-master = <&rsnd_endpoint0>;

 				playback = <&ssi1 &dvc1 &src1>;
 				capture = <&ssi0>;
 			};
 		};
 		rsnd_port1: port@1 {
 		    reg = <0x01>;
 			rsnd_endpoint1: endpoint {
 				remote-endpoint = <&dw_hdmi0_snd_in>;

 				dai-format = "i2s";
 				bitclock-master = <&rsnd_endpoint1>;
 				frame-master = <&rsnd_endpoint1>;

 				playback = <&ssi2>;
 			};
 		};
 	};
 };

 &rwdt {
 	status = "okay";
 	timeout-sec = <60>;
 };

 &scif0 {
 	pinctrl-0 = <&scif0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
 };

 &scif5 {
 	pinctrl-0 = <&scif5_pins>;
 	pinctrl-names = "default";
 	status = "okay";
 };

 &scif_clk {
 	clock-frequency = <14745600>;
 };

 &sdhi0 {
 	pinctrl-0 = <&sdhi0_pins>;
 	pinctrl-1 = <&sdhi0_pins_uhs>;
 	pinctrl-names = "default", "state_uhs";
 	vmmc-supply = <&reg_3p3v>;
 	vqmmc-supply = <&vccq_sdhi0>;
 	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
 	bus-width = <4>;
 	sd-uhs-sdr50;
 	sd-uhs-sdr104;
 	status = "okay";
 };

 &ssi1 {
 	shared-pin;
 };

 &tmu0 {
 	status = "okay";
 };

 &tmu1 {
 	status = "okay";
 };

 &tmu2 {
 	status = "okay";
 };

 &tmu3 {
 	status = "okay";
 };

 &tmu4 {
 	status = "okay";
 };

 &usb2_phy0 {
 	pinctrl-0 = <&usb0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
 };

 &usb2_phy1 {
 	pinctrl-0 = <&usb1_pins>;
 	pinctrl-names = "default";
 	status = "okay";
 };

 &usb3_peri0 {
 	companion = <&xhci0>;
 	status = "okay";
 	usb-role-switch;

 	port {
 		usb3_role_switch: endpoint {
 			remote-endpoint = <&hd3ss3220_ep>;
 		};
 	};
 };

 &usb3_phy0 {
 	status = "okay";
 };

 &vin0 {
 	status = "okay";
 };
 &vin1 {
 	status = "okay";
 };
 &vin2 {
 	status = "okay";
 };
 &vin3 {
 	status = "okay";
 };
 &vin4 {
 	status = "okay";
 };
 &vin5 {
 	status = "okay";
 };
 &vin6 {
 	status = "okay";
 };
 &vin7 {
 	status = "okay";
 };

 &xhci0
 {
 	pinctrl-0 = <&usb30_pins>;
 	pinctrl-names = "default";
 	status = "okay";
 };
	// SPDX-License-Identifier: GPL-2.0
	/*
	* Copyright 2020, Compass Electronics Group, LLC
	*/

	#include <dt-bindings/gpio/gpio.h>
	#include <dt-bindings/input/input.h>

	/ {
	backlight_lvds: backlight-lvds {
	compatible = "pwm-backlight";
	power-supply = <&reg_lcd>;
	enable-gpios = <&gpio_exp1 3 GPIO_ACTIVE_LOW>;
	pwms = <&pwm2 0 50000>;
	brightness-levels = <0 4 8 16 32 64 128 255>;
	default-brightness-level = <6>;
	};

	backlight_rgb: backlight-rgb {
	compatible = "pwm-backlight";
	power-supply = <&reg_lcd>;
	enable-gpios = <&gpio_exp1 7 GPIO_ACTIVE_LOW>;
	pwms = <&pwm0 0 50000>;
	brightness-levels = <0 4 8 16 32 64 128 255>;
	default-brightness-level = <6>;
	};

	hdmi0-out {
	compatible = "hdmi-connector";
	type = "a";

	port {
	hdmi0_con: endpoint {
	remote-endpoint = <&rcar_dw_hdmi0_out>;
	};
	};
	};

	keys {
	compatible = "gpio-keys";

	key-1 {
	gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
	linux,code = <KEY_1>;
	label = "Switch-1";
	wakeup-source;
	debounce-interval = <20>;
	};
	key-2 {
	gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
	linux,code = <KEY_2>;
	label = "Switch-2";
	wakeup-source;
	debounce-interval = <20>;
	};
	key-3 {
	gpios = <&gpio5 17 GPIO_ACTIVE_LOW>;
	linux,code = <KEY_3>;
	label = "Switch-3";
	wakeup-source;
	debounce-interval = <20>;
	};
	key-4 {
	gpios = <&gpio5 20 GPIO_ACTIVE_LOW>;
	linux,code = <KEY_4>;
	label = "Switch-4";
	wakeup-source;
	debounce-interval = <20>;
	};
	key-5 {
	gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
	linux,code = <KEY_5>;
	label = "Switch-4";
	wakeup-source;
	debounce-interval = <20>;
	};
	};

	leds {
	compatible = "gpio-leds";
	pinctrl-0 = <&led_pins>;
	pinctrl-names = "default";

	led0 {
	gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
	label = "LED0";
	linux,default-trigger = "heartbeat";
	};
	led1 {
	gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
	label = "LED1";
	};
	led2 {
	gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
	label = "LED2";
	};
	led3 {
	gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
	label = "LED3";
	};
	};

	lvds {
	compatible = "panel-lvds";
	power-supply = <&reg_lcd_reset>;
	width-mm = <223>;
	height-mm = <125>;
	backlight = <&backlight_lvds>;
	data-mapping = "vesa-24";

	panel-timing {
	/* 800x480@60Hz */
	clock-frequency = <30000000>;
	hactive = <800>;
	vactive = <480>;
	hsync-len = <48>;
	hfront-porch = <40>;
	hback-porch = <40>;
	vfront-porch = <13>;
	vback-porch = <29>;
	vsync-len = <3>;
	hsync-active = <1>;
	vsync-active = <1>;
	de-active = <1>;
	pixelclk-active = <0>;
	};

	port {
	panel_in: endpoint {
	remote-endpoint = <&lvds0_out>;
	};
	};
	};

	rgb {
	/* Different LCD with compatible timings */
	compatible = "rocktech,rk070er9427";
	backlight = <&backlight_rgb>;
	enable-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
	power-supply = <&reg_lcd>;
	port {
	rgb_panel: endpoint {
	remote-endpoint = <&du_out_rgb>;
	};
	};
	};

	reg_audio: regulator_audio {
	compatible = "regulator-fixed";
	regulator-name = "audio-1.8V";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	gpio = <&gpio_exp2 7 GPIO_ACTIVE_HIGH>;
	enable-active-high;
	};

	reg_lcd: regulator-lcd {
	compatible = "regulator-fixed";
	regulator-name = "lcd_panel_pwr";
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	gpio = <&gpio_exp1 1 GPIO_ACTIVE_HIGH>;
	enable-active-high;
	};

	reg_lcd_reset: regulator-lcd-reset {
	compatible = "regulator-fixed";
	regulator-name = "nLCD_RESET";
	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	gpio = <&gpio5 3 GPIO_ACTIVE_HIGH>;
	enable-active-high;
	vin-supply = <&reg_lcd>;
	};

	reg_cam0: regulator_camera {
	compatible = "regulator-fixed";
	regulator-name = "reg_cam0";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	gpio = <&gpio_exp2 2 GPIO_ACTIVE_HIGH>;
	enable-active-high;
	};

	reg_cam1: regulator_camera {
	compatible = "regulator-fixed";
	regulator-name = "reg_cam1";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <1800000>;
	gpio = <&gpio_exp2 5 GPIO_ACTIVE_HIGH>;
	enable-active-high;
	startup-delay-us = <100000>;
	};

	sound_card {
	compatible = "audio-graph-card";
	label = "rcar-sound";
	dais = <&rsnd_port0>, <&rsnd_port1>;
	};

	vccq_sdhi0: regulator-vccq-sdhi0 {
	compatible = "regulator-gpio";

	regulator-name = "SDHI0 VccQ";
	regulator-min-microvolt = <1800000>;
	regulator-max-microvolt = <3300000>;

	gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
	gpios-states = <1>;
	states = <3300000 1>, <1800000 0>;
	regulator-always-on;
	};

	/* External DU dot clocks */
	x302_clk: x302-clock {
	compatible = "fixed-clock";
	#clock-cells = <0>;
	clock-frequency = <33000000>;
	};

	x304_clk: x304-clock {
	compatible = "fixed-clock";
	#clock-cells = <0>;
	clock-frequency = <25000000>;
	};
	};

	&audio_clk_a {
	clock-frequency = <24576000>;
	assigned-clocks = <&versaclock6_bb 4>;
	assigned-clock-rates = <24576000>;
	};

	&audio_clk_b {
	clock-frequency = <22579200>;
	};

	&can0 {
	pinctrl-0 = <&can0_pins>;
	pinctrl-names = "default";
	renesas,can-clock-select = <0x0>;
	status = "okay";
	};

	&can1 {
	pinctrl-0 = <&can1_pins>;
	pinctrl-names = "default";
	renesas,can-clock-select = <0x0>;
	status = "okay";
	};

	&du {
	pinctrl-0 = <&du_pins>;
	pinctrl-names = "default";
	status = "okay";

	clocks = <&cpg CPG_MOD 724>,
	<&cpg CPG_MOD 723>,
	<&cpg CPG_MOD 722>,
	<&versaclock5 1>,
	<&x302_clk>,
	<&versaclock5 2>;
	clock-names = "du.0", "du.1", "du.2",
	"dclkin.0", "dclkin.1", "dclkin.2";
	};

	&du_out_rgb {
	remote-endpoint = <&rgb_panel>;
	};

	&ehci0 {
	dr_mode = "otg";
	status = "okay";
	clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
	};

	&ehci1 {
	status = "okay";
	clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
	};

	&hdmi0 {
	status = "okay";
	ports {
	#address-cells = <1>;
	#size-cells = <0>;
	port@0 {
	reg = <0>;
	dw_hdmi0_in: endpoint {
	remote-endpoint = <&du_out_hdmi0>;
	};
	};
	port@1 {
	reg = <1>;
	rcar_dw_hdmi0_out: endpoint {
	remote-endpoint = <&hdmi0_con>;
	};
	};
	port@2 {
	reg = <2>;
	dw_hdmi0_snd_in: endpoint {
	remote-endpoint = <&rsnd_endpoint1>;
	};
	};
	};
	};

	&hscif1 {
	pinctrl-0 = <&hscif1_pins>;
	pinctrl-names = "default";
	uart-has-rtscts;
	status = "okay";
	};

	&hsusb {
	dr_mode = "otg";
	status = "okay";
	};

	&i2c2 {
	status = "okay";
	clock-frequency = <100000>;
	pinctrl-0 = <&i2c2_pins>;
	pinctrl-names = "default";

	gpio_exp2: gpio@21 {
	compatible = "onnn,pca9654";
	reg = <0x21>;
	gpio-controller;
	#gpio-cells = <2>;
	};

	gpio_exp3: gpio@22 {
	compatible = "onnn,pca9654";
	reg = <0x22>;
	gpio-controller;
	#gpio-cells = <2>;
	};

	gpio_exp4: gpio@23 {
	compatible = "onnn,pca9654";
	reg = <0x23>;
	gpio-controller;
	#gpio-cells = <2>;
	};

	versaclock6_bb: clock-controller@6a {
	compatible = "idt,5p49v6965";
	reg = <0x6a>;
	#clock-cells = <1>;
	clocks = <&x304_clk>;
	clock-names = "xin";
	/* CSI0_MCLK, CSI1_MCLK, AUDIO_CLKIN, USB_HUB_MCLK_BB */
	assigned-clocks = <&versaclock6_bb 1>,
	<&versaclock6_bb 2>,
	<&versaclock6_bb 3>,
	<&versaclock6_bb 4>;
	assigned-clock-rates = <24000000>, <24000000>, <24000000>, <24576000>;
	};
	};

	&i2c0 {
	status = "okay";
	clock-frequency = <400000>;

	pinctrl-0 = <&i2c0_pins>;
	pinctrl-names = "default";
	};

	&i2c5 {
	status = "okay";
	clock-frequency = <100000>;
	pinctrl-0 = <&i2c5_pins>;
	pinctrl-names = "default";

	codec: wm8962@1a {
	compatible = "wlf,wm8962";
	reg = <0x1a>;
	DCVDD-supply = <&reg_audio>;
	DBVDD-supply = <&reg_audio>;
	AVDD-supply = <&reg_audio>;
	CPVDD-supply = <&reg_audio>;
	MICVDD-supply = <&reg_audio>;
	PLLVDD-supply = <&reg_audio>;
	SPKVDD1-supply = <&reg_audio>;
	SPKVDD2-supply = <&reg_audio>;
	gpio-cfg = <
	0x0000 /* 0:Default */
	0x0000 /* 1:Default */
	0x0000 /* 2:Default */
	0x0000 /* 3:Default */
	0x0000 /* 4:Default */
	0x0000 /* 5:Default */
	>;
	port {
	wm8962_endpoint: endpoint {
	remote-endpoint = <&rsnd_endpoint0>;
	};
	};
	};

	/* 0 - lcd_reset */
	/* 1 - lcd_pwr */
	/* 2 - lcd_select */
	/* 3 - backlight-enable */
	/* 4 - Touch_shdwn */
	/* 5 - LCD_H_pol */
	/* 6 - lcd_V_pol */
	gpio_exp1: gpio@20 {
	compatible = "onnn,pca9654";
	reg = <0x20>;
	gpio-controller;
	#gpio-cells = <2>;
	};

	touchscreen@26 {
	compatible = "ilitek,ili2117";
	reg = <0x26>;
	interrupt-parent = <&gpio5>;
	interrupts = <9 IRQ_TYPE_EDGE_RISING>;
	wakeup-source;
	};

	hd3ss3220@47 {
	compatible = "ti,hd3ss3220";
	reg = <0x47>;
	interrupt-parent = <&gpio6>;
	interrupts = <4 IRQ_TYPE_LEVEL_LOW>;

	connector {
	compatible = "usb-c-connector";
	label = "USB-C";
	data-role = "dual";

	ports {
	#address-cells = <1>;
	#size-cells = <0>;

	port@1 {
	reg = <1>;
	hd3ss3220_ep: endpoint {
	remote-endpoint = <&usb3_role_switch>;
	};
	};
	};
	};
	};
	};

	&lvds0 {
	status = "okay";

	ports {
	port@1 {
	lvds0_out: endpoint {
	remote-endpoint = <&panel_in>;
	};
	};
	};
	};

	&ohci0 {
	dr_mode = "otg";
	status = "okay";
	};

	&ohci1 {
	status = "okay";
	};

	&pciec0 {
	status = "okay";
	};

	&pciec1 {
	status = "okay";
	};

	&pcie_bus_clk {
	clock-frequency = <100000000>;
	};

	&pfc {
	can0_pins: can0 {
	groups = "can0_data_a";
	function = "can0";
	};

	can1_pins: can1 {
	groups = "can1_data";
	function = "can1";
	};

	du_pins: du {
	groups = "du_rgb888", "du_sync", "du_clk_out_1", "du_disp";
	function = "du";
	};

	i2c2_pins: i2c2 {
	groups = "i2c2_a";
	function = "i2c2";
	};

	i2c5_pins: i2c5 {
	groups = "i2c5";
	function = "i2c5";
	};

	led_pins: leds {
	/* GP_0_4 , AVS1, AVS2, GP_7_3 */
	pins = "GP_0_4", "GP_7_0", "GP_7_1", "GP_7_3";
	bias-pull-down;
	};

	pwm0_pins: pwm0 {
	groups = "pwm0";
	function = "pwm0";
	};

	pwm2_pins: pwm2 {
	groups = "pwm2_a";
	function = "pwm2_a";
	};

	sdhi0_pins: sd0 {
	groups = "sdhi0_data4", "sdhi0_ctrl";
	function = "sdhi0";
	power-source = <3300>;
	};

	sdhi0_pins_uhs: sd0_uhs {
	groups = "sdhi0_data4", "sdhi0_ctrl";
	function = "sdhi0";
	power-source = <1800>;
	};

	sound_pins: sound {
	groups = "ssi01239_ctrl", "ssi0_data", "ssi1_data_a";
	function = "ssi";
	};

	sound_clk_pins: sound_clk {
	groups = "audio_clk_a_a";
	function = "audio_clk";
	};

	usb0_pins: usb0 {
	mux {
	groups = "usb0";
	function = "usb0";
	};
	};

	usb1_pins: usb1 {
	mux {
	groups = "usb1";
	function = "usb1";
	};
	};

	usb30_pins: usb30 {
	mux {
	groups = "usb30";
	function = "usb30";
	};
	};
	};

	&pwm0 {
	pinctrl-0 = <&pwm0_pins>;
	pinctrl-names = "default";
	status = "okay";
	};

	&pwm2 {
	pinctrl-0 = <&pwm2_pins>;
	pinctrl-names = "default";
	status = "okay";
	};

	&rcar_sound {
	pinctrl-0 = <&sound_pins &sound_clk_pins>;
	pinctrl-names = "default";

	/* Single DAI */
	#sound-dai-cells = <0>;

	/* audio_clkout0/1/2/3 */
	#clock-cells = <1>;
	clock-frequency = <11289600>;

	status = "okay";

	clocks = <&cpg CPG_MOD 1005>,
	<&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
	<&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
	<&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
	<&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
	<&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
	<&cpg CPG_MOD 1022>, <&cpg CPG_MOD 1023>,
	<&cpg CPG_MOD 1024>, <&cpg CPG_MOD 1025>,
	<&cpg CPG_MOD 1026>, <&cpg CPG_MOD 1027>,
	<&cpg CPG_MOD 1028>, <&cpg CPG_MOD 1029>,
	<&cpg CPG_MOD 1030>, <&cpg CPG_MOD 1031>,
	<&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
	<&cpg CPG_MOD 1020>, <&cpg CPG_MOD 1021>,
	<&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
	<&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>,
	<&cpg CPG_CORE R8A774A1_CLK_S0D4>;

	ports {
	#address-cells = <1>;
	#size-cells = <0>;
	rsnd_port0: port@0 {
	reg = <0>;
	rsnd_endpoint0: endpoint {
	remote-endpoint = <&wm8962_endpoint>;

	dai-format = "i2s";
	bitclock-master = <&rsnd_endpoint0>;
	frame-master = <&rsnd_endpoint0>;

	playback = <&ssi1 &dvc1 &src1>;
	capture = <&ssi0>;
	};
	};
	rsnd_port1: port@1 {
	reg = <0x01>;
	rsnd_endpoint1: endpoint {
	remote-endpoint = <&dw_hdmi0_snd_in>;

	dai-format = "i2s";
	bitclock-master = <&rsnd_endpoint1>;
	frame-master = <&rsnd_endpoint1>;

	playback = <&ssi2>;
	};
	};
	};
	};

	&rwdt {
	status = "okay";
	timeout-sec = <60>;
	};

	&scif0 {
	pinctrl-0 = <&scif0_pins>;
	pinctrl-names = "default";
	status = "okay";
	};

	&scif5 {
	pinctrl-0 = <&scif5_pins>;
	pinctrl-names = "default";
	status = "okay";
	};

	&scif_clk {
	clock-frequency = <14745600>;
	};

	&sdhi0 {
	pinctrl-0 = <&sdhi0_pins>;
	pinctrl-1 = <&sdhi0_pins_uhs>;
	pinctrl-names = "default", "state_uhs";
	vmmc-supply = <&reg_3p3v>;
	vqmmc-supply = <&vccq_sdhi0>;
	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
	bus-width = <4>;
	sd-uhs-sdr50;
	sd-uhs-sdr104;
	status = "okay";
	};

	&ssi1 {
	shared-pin;
	};

	&tmu0 {
	status = "okay";
	};

	&tmu1 {
	status = "okay";
	};

	&tmu2 {
	status = "okay";
	};

	&tmu3 {
	status = "okay";
	};

	&tmu4 {
	status = "okay";
	};

	&usb2_phy0 {
	pinctrl-0 = <&usb0_pins>;
	pinctrl-names = "default";
	status = "okay";
	};

	&usb2_phy1 {
	pinctrl-0 = <&usb1_pins>;
	pinctrl-names = "default";
	status = "okay";
	};

	&usb3_peri0 {
	companion = <&xhci0>;
	status = "okay";
	usb-role-switch;

	port {
	usb3_role_switch: endpoint {
	remote-endpoint = <&hd3ss3220_ep>;
	};
	};
	};

	&usb3_phy0 {
	status = "okay";
	};

	&vin0 {
	status = "okay";
	};
	&vin1 {
	status = "okay";
	};
	&vin2 {
	status = "okay";
	};
	&vin3 {
	status = "okay";
	};
	&vin4 {
	status = "okay";
	};
	&vin5 {
	status = "okay";
	};
	&vin6 {
	status = "okay";
	};
	&vin7 {
	status = "okay";
	};

	&xhci0
	{
	pinctrl-0 = <&usb30_pins>;
	pinctrl-names = "default";
	status = "okay";
	};