| /* |
| * Access ACPI _OSC method |
| * |
| * Copyright (C) 2006 Intel Corp. |
| * Tom Long Nguyen (tom.l.nguyen@intel.com) |
| * Zhang Yanmin (yanmin.zhang@intel.com) |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/pm.h> |
| #include <linux/suspend.h> |
| #include <linux/acpi.h> |
| #include <linux/pci-acpi.h> |
| #include <linux/delay.h> |
| #include <acpi/apei.h> |
| #include "aerdrv.h" |
| |
| /** |
| * aer_osc_setup - run ACPI _OSC method |
| * @pciedev: pcie_device which AER is being enabled on |
| * |
| * @return: Zero on success. Nonzero otherwise. |
| * |
| * Invoked when PCIe bus loads AER service driver. To avoid conflict with |
| * BIOS AER support requires BIOS to yield AER control to OS native driver. |
| **/ |
| int aer_osc_setup(struct pcie_device *pciedev) |
| { |
| acpi_status status = AE_NOT_FOUND; |
| struct pci_dev *pdev = pciedev->port; |
| acpi_handle handle = NULL; |
| |
| if (acpi_pci_disabled) |
| return -1; |
| |
| handle = acpi_find_root_bridge_handle(pdev); |
| if (handle) { |
| status = acpi_pci_osc_control_set(handle, |
| OSC_PCI_EXPRESS_AER_CONTROL | |
| OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL); |
| } |
| |
| if (ACPI_FAILURE(status)) { |
| dev_printk(KERN_DEBUG, &pciedev->device, "AER service couldn't " |
| "init device: %s\n", |
| (status == AE_SUPPORT || status == AE_NOT_FOUND) ? |
| "no _OSC support" : "_OSC failed"); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_ACPI_APEI |
| static inline int hest_match_pci(struct acpi_hest_aer_common *p, |
| struct pci_dev *pci) |
| { |
| return (0 == pci_domain_nr(pci->bus) && |
| p->bus == pci->bus->number && |
| p->device == PCI_SLOT(pci->devfn) && |
| p->function == PCI_FUNC(pci->devfn)); |
| } |
| |
| struct aer_hest_parse_info { |
| struct pci_dev *pci_dev; |
| int firmware_first; |
| }; |
| |
| static int aer_hest_parse(struct acpi_hest_header *hest_hdr, void *data) |
| { |
| struct aer_hest_parse_info *info = data; |
| struct acpi_hest_aer_common *p; |
| u8 pcie_type = 0; |
| u8 bridge = 0; |
| int ff = 0; |
| |
| switch (hest_hdr->type) { |
| case ACPI_HEST_TYPE_AER_ROOT_PORT: |
| pcie_type = PCI_EXP_TYPE_ROOT_PORT; |
| break; |
| case ACPI_HEST_TYPE_AER_ENDPOINT: |
| pcie_type = PCI_EXP_TYPE_ENDPOINT; |
| break; |
| case ACPI_HEST_TYPE_AER_BRIDGE: |
| if ((info->pci_dev->class >> 16) == PCI_BASE_CLASS_BRIDGE) |
| bridge = 1; |
| break; |
| default: |
| return 0; |
| } |
| |
| p = (struct acpi_hest_aer_common *)(hest_hdr + 1); |
| if (p->flags & ACPI_HEST_GLOBAL) { |
| if ((info->pci_dev->is_pcie && |
| info->pci_dev->pcie_type == pcie_type) || bridge) |
| ff = !!(p->flags & ACPI_HEST_FIRMWARE_FIRST); |
| } else |
| if (hest_match_pci(p, info->pci_dev)) |
| ff = !!(p->flags & ACPI_HEST_FIRMWARE_FIRST); |
| info->firmware_first = ff; |
| |
| return 0; |
| } |
| |
| static void aer_set_firmware_first(struct pci_dev *pci_dev) |
| { |
| int rc; |
| struct aer_hest_parse_info info = { |
| .pci_dev = pci_dev, |
| .firmware_first = 0, |
| }; |
| |
| rc = apei_hest_parse(aer_hest_parse, &info); |
| |
| if (rc) |
| pci_dev->__aer_firmware_first = 0; |
| else |
| pci_dev->__aer_firmware_first = info.firmware_first; |
| pci_dev->__aer_firmware_first_valid = 1; |
| } |
| |
| int pcie_aer_get_firmware_first(struct pci_dev *dev) |
| { |
| if (!dev->__aer_firmware_first_valid) |
| aer_set_firmware_first(dev); |
| return dev->__aer_firmware_first; |
| } |
| #endif |