| * Analog Devices ADP1653 flash LED driver |
| - compatible: Must contain "adi,adp1653" |
| - enable-gpios: Specifier of the GPIO connected to EN pin |
| There are two LED outputs available - flash and indicator. One LED is |
| represented by one child node, nodes need to be named "flash" and "indicator". |
| Required properties of the LED child node: |
| - led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt |
| Required properties of the flash LED child node: |
| - flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt |
| - flash-timeout-us : see Documentation/devicetree/bindings/leds/common.txt |
| - led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt |
| adp1653: led-controller@30 { |
| compatible = "adi,adp1653"; |
| enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */ |
| flash-timeout-us = <500000>; |
| flash-max-microamp = <320000>; |
| led-max-microamp = <50000>; |
| led-max-microamp = <17500>; |