| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * OF helpers for the MDIO (Ethernet PHY) API |
| * |
| * Copyright (c) 2009 Secret Lab Technologies, Ltd. |
| * |
| * This file provides helper functions for extracting PHY device information |
| * out of the OpenFirmware device tree and using it to populate an mii_bus. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/device.h> |
| #include <linux/netdevice.h> |
| #include <linux/err.h> |
| #include <linux/phy.h> |
| #include <linux/phy_fixed.h> |
| #include <linux/of.h> |
| #include <linux/of_irq.h> |
| #include <linux/of_mdio.h> |
| #include <linux/of_net.h> |
| #include <linux/module.h> |
| |
| #define DEFAULT_GPIO_RESET_DELAY 10 /* in microseconds */ |
| |
| MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>"); |
| MODULE_LICENSE("GPL"); |
| |
| /* Extract the clause 22 phy ID from the compatible string of the form |
| * ethernet-phy-idAAAA.BBBB */ |
| static int of_get_phy_id(struct device_node *device, u32 *phy_id) |
| { |
| struct property *prop; |
| const char *cp; |
| unsigned int upper, lower; |
| |
| of_property_for_each_string(device, "compatible", prop, cp) { |
| if (sscanf(cp, "ethernet-phy-id%4x.%4x", &upper, &lower) == 2) { |
| *phy_id = ((upper & 0xFFFF) << 16) | (lower & 0xFFFF); |
| return 0; |
| } |
| } |
| return -EINVAL; |
| } |
| |
| static int of_mdiobus_register_phy(struct mii_bus *mdio, |
| struct device_node *child, u32 addr) |
| { |
| struct phy_device *phy; |
| bool is_c45; |
| int rc; |
| u32 phy_id; |
| |
| is_c45 = of_device_is_compatible(child, |
| "ethernet-phy-ieee802.3-c45"); |
| |
| if (!is_c45 && !of_get_phy_id(child, &phy_id)) |
| phy = phy_device_create(mdio, addr, phy_id, 0, NULL); |
| else |
| phy = get_phy_device(mdio, addr, is_c45); |
| if (IS_ERR(phy)) |
| return PTR_ERR(phy); |
| |
| rc = of_irq_get(child, 0); |
| if (rc == -EPROBE_DEFER) { |
| phy_device_free(phy); |
| return rc; |
| } |
| if (rc > 0) { |
| phy->irq = rc; |
| mdio->irq[addr] = rc; |
| } else { |
| phy->irq = mdio->irq[addr]; |
| } |
| |
| if (of_property_read_bool(child, "broken-turn-around")) |
| mdio->phy_ignore_ta_mask |= 1 << addr; |
| |
| of_property_read_u32(child, "reset-assert-us", |
| &phy->mdio.reset_assert_delay); |
| of_property_read_u32(child, "reset-deassert-us", |
| &phy->mdio.reset_deassert_delay); |
| |
| /* Associate the OF node with the device structure so it |
| * can be looked up later */ |
| of_node_get(child); |
| phy->mdio.dev.of_node = child; |
| phy->mdio.dev.fwnode = of_fwnode_handle(child); |
| |
| /* All data is now stored in the phy struct; |
| * register it */ |
| rc = phy_device_register(phy); |
| if (rc) { |
| phy_device_free(phy); |
| of_node_put(child); |
| return rc; |
| } |
| |
| dev_dbg(&mdio->dev, "registered phy %pOFn at address %i\n", |
| child, addr); |
| return 0; |
| } |
| |
| static int of_mdiobus_register_device(struct mii_bus *mdio, |
| struct device_node *child, u32 addr) |
| { |
| struct mdio_device *mdiodev; |
| int rc; |
| |
| mdiodev = mdio_device_create(mdio, addr); |
| if (IS_ERR(mdiodev)) |
| return PTR_ERR(mdiodev); |
| |
| /* Associate the OF node with the device structure so it |
| * can be looked up later. |
| */ |
| of_node_get(child); |
| mdiodev->dev.of_node = child; |
| mdiodev->dev.fwnode = of_fwnode_handle(child); |
| |
| /* All data is now stored in the mdiodev struct; register it. */ |
| rc = mdio_device_register(mdiodev); |
| if (rc) { |
| mdio_device_free(mdiodev); |
| of_node_put(child); |
| return rc; |
| } |
| |
| dev_dbg(&mdio->dev, "registered mdio device %pOFn at address %i\n", |
| child, addr); |
| return 0; |
| } |
| |
| /* The following is a list of PHY compatible strings which appear in |
| * some DTBs. The compatible string is never matched against a PHY |
| * driver, so is pointless. We only expect devices which are not PHYs |
| * to have a compatible string, so they can be matched to an MDIO |
| * driver. Encourage users to upgrade their DT blobs to remove these. |
| */ |
| static const struct of_device_id whitelist_phys[] = { |
| { .compatible = "brcm,40nm-ephy" }, |
| { .compatible = "broadcom,bcm5241" }, |
| { .compatible = "marvell,88E1111", }, |
| { .compatible = "marvell,88e1116", }, |
| { .compatible = "marvell,88e1118", }, |
| { .compatible = "marvell,88e1145", }, |
| { .compatible = "marvell,88e1149r", }, |
| { .compatible = "marvell,88e1310", }, |
| { .compatible = "marvell,88E1510", }, |
| { .compatible = "marvell,88E1514", }, |
| { .compatible = "moxa,moxart-rtl8201cp", }, |
| {} |
| }; |
| |
| /* |
| * Return true if the child node is for a phy. It must either: |
| * o Compatible string of "ethernet-phy-idX.X" |
| * o Compatible string of "ethernet-phy-ieee802.3-c45" |
| * o Compatible string of "ethernet-phy-ieee802.3-c22" |
| * o In the white list above (and issue a warning) |
| * o No compatibility string |
| * |
| * A device which is not a phy is expected to have a compatible string |
| * indicating what sort of device it is. |
| */ |
| static bool of_mdiobus_child_is_phy(struct device_node *child) |
| { |
| u32 phy_id; |
| |
| if (of_get_phy_id(child, &phy_id) != -EINVAL) |
| return true; |
| |
| if (of_device_is_compatible(child, "ethernet-phy-ieee802.3-c45")) |
| return true; |
| |
| if (of_device_is_compatible(child, "ethernet-phy-ieee802.3-c22")) |
| return true; |
| |
| if (of_match_node(whitelist_phys, child)) { |
| pr_warn(FW_WARN |
| "%pOF: Whitelisted compatible string. Please remove\n", |
| child); |
| return true; |
| } |
| |
| if (!of_find_property(child, "compatible", NULL)) |
| return true; |
| |
| return false; |
| } |
| |
| /** |
| * of_mdiobus_register - Register mii_bus and create PHYs from the device tree |
| * @mdio: pointer to mii_bus structure |
| * @np: pointer to device_node of MDIO bus. |
| * |
| * This function registers the mii_bus structure and registers a phy_device |
| * for each child node of @np. |
| */ |
| int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np) |
| { |
| struct device_node *child; |
| bool scanphys = false; |
| int addr, rc; |
| |
| if (!np) |
| return mdiobus_register(mdio); |
| |
| /* Do not continue if the node is disabled */ |
| if (!of_device_is_available(np)) |
| return -ENODEV; |
| |
| /* Mask out all PHYs from auto probing. Instead the PHYs listed in |
| * the device tree are populated after the bus has been registered */ |
| mdio->phy_mask = ~0; |
| |
| mdio->dev.of_node = np; |
| mdio->dev.fwnode = of_fwnode_handle(np); |
| |
| /* Get bus level PHY reset GPIO details */ |
| mdio->reset_delay_us = DEFAULT_GPIO_RESET_DELAY; |
| of_property_read_u32(np, "reset-delay-us", &mdio->reset_delay_us); |
| |
| /* Register the MDIO bus */ |
| rc = mdiobus_register(mdio); |
| if (rc) |
| return rc; |
| |
| /* Loop over the child nodes and register a phy_device for each phy */ |
| for_each_available_child_of_node(np, child) { |
| addr = of_mdio_parse_addr(&mdio->dev, child); |
| if (addr < 0) { |
| scanphys = true; |
| continue; |
| } |
| |
| if (of_mdiobus_child_is_phy(child)) |
| rc = of_mdiobus_register_phy(mdio, child, addr); |
| else |
| rc = of_mdiobus_register_device(mdio, child, addr); |
| |
| if (rc == -ENODEV) |
| dev_err(&mdio->dev, |
| "MDIO device at address %d is missing.\n", |
| addr); |
| else if (rc) |
| goto unregister; |
| } |
| |
| if (!scanphys) |
| return 0; |
| |
| /* auto scan for PHYs with empty reg property */ |
| for_each_available_child_of_node(np, child) { |
| /* Skip PHYs with reg property set */ |
| if (of_find_property(child, "reg", NULL)) |
| continue; |
| |
| for (addr = 0; addr < PHY_MAX_ADDR; addr++) { |
| /* skip already registered PHYs */ |
| if (mdiobus_is_registered_device(mdio, addr)) |
| continue; |
| |
| /* be noisy to encourage people to set reg property */ |
| dev_info(&mdio->dev, "scan phy %pOFn at address %i\n", |
| child, addr); |
| |
| if (of_mdiobus_child_is_phy(child)) { |
| rc = of_mdiobus_register_phy(mdio, child, addr); |
| if (rc && rc != -ENODEV) |
| goto unregister; |
| } |
| } |
| } |
| |
| return 0; |
| |
| unregister: |
| mdiobus_unregister(mdio); |
| return rc; |
| } |
| EXPORT_SYMBOL(of_mdiobus_register); |
| |
| /** |
| * of_phy_find_device - Give a PHY node, find the phy_device |
| * @phy_np: Pointer to the phy's device tree node |
| * |
| * If successful, returns a pointer to the phy_device with the embedded |
| * struct device refcount incremented by one, or NULL on failure. |
| */ |
| struct phy_device *of_phy_find_device(struct device_node *phy_np) |
| { |
| struct device *d; |
| struct mdio_device *mdiodev; |
| |
| if (!phy_np) |
| return NULL; |
| |
| d = bus_find_device_by_of_node(&mdio_bus_type, phy_np); |
| if (d) { |
| mdiodev = to_mdio_device(d); |
| if (mdiodev->flags & MDIO_DEVICE_FLAG_PHY) |
| return to_phy_device(d); |
| put_device(d); |
| } |
| |
| return NULL; |
| } |
| EXPORT_SYMBOL(of_phy_find_device); |
| |
| /** |
| * of_phy_connect - Connect to the phy described in the device tree |
| * @dev: pointer to net_device claiming the phy |
| * @phy_np: Pointer to device tree node for the PHY |
| * @hndlr: Link state callback for the network device |
| * @flags: flags to pass to the PHY |
| * @iface: PHY data interface type |
| * |
| * If successful, returns a pointer to the phy_device with the embedded |
| * struct device refcount incremented by one, or NULL on failure. The |
| * refcount must be dropped by calling phy_disconnect() or phy_detach(). |
| */ |
| struct phy_device *of_phy_connect(struct net_device *dev, |
| struct device_node *phy_np, |
| void (*hndlr)(struct net_device *), u32 flags, |
| phy_interface_t iface) |
| { |
| struct phy_device *phy = of_phy_find_device(phy_np); |
| int ret; |
| |
| if (!phy) |
| return NULL; |
| |
| phy->dev_flags = flags; |
| |
| ret = phy_connect_direct(dev, phy, hndlr, iface); |
| |
| /* refcount is held by phy_connect_direct() on success */ |
| put_device(&phy->mdio.dev); |
| |
| return ret ? NULL : phy; |
| } |
| EXPORT_SYMBOL(of_phy_connect); |
| |
| /** |
| * of_phy_get_and_connect |
| * - Get phy node and connect to the phy described in the device tree |
| * @dev: pointer to net_device claiming the phy |
| * @np: Pointer to device tree node for the net_device claiming the phy |
| * @hndlr: Link state callback for the network device |
| * |
| * If successful, returns a pointer to the phy_device with the embedded |
| * struct device refcount incremented by one, or NULL on failure. The |
| * refcount must be dropped by calling phy_disconnect() or phy_detach(). |
| */ |
| struct phy_device *of_phy_get_and_connect(struct net_device *dev, |
| struct device_node *np, |
| void (*hndlr)(struct net_device *)) |
| { |
| phy_interface_t iface; |
| struct device_node *phy_np; |
| struct phy_device *phy; |
| int ret; |
| |
| iface = of_get_phy_mode(np); |
| if ((int)iface < 0) |
| return NULL; |
| if (of_phy_is_fixed_link(np)) { |
| ret = of_phy_register_fixed_link(np); |
| if (ret < 0) { |
| netdev_err(dev, "broken fixed-link specification\n"); |
| return NULL; |
| } |
| phy_np = of_node_get(np); |
| } else { |
| phy_np = of_parse_phandle(np, "phy-handle", 0); |
| if (!phy_np) |
| return NULL; |
| } |
| |
| phy = of_phy_connect(dev, phy_np, hndlr, 0, iface); |
| |
| of_node_put(phy_np); |
| |
| return phy; |
| } |
| EXPORT_SYMBOL(of_phy_get_and_connect); |
| |
| /** |
| * of_phy_attach - Attach to a PHY without starting the state machine |
| * @dev: pointer to net_device claiming the phy |
| * @phy_np: Node pointer for the PHY |
| * @flags: flags to pass to the PHY |
| * @iface: PHY data interface type |
| * |
| * If successful, returns a pointer to the phy_device with the embedded |
| * struct device refcount incremented by one, or NULL on failure. The |
| * refcount must be dropped by calling phy_disconnect() or phy_detach(). |
| */ |
| struct phy_device *of_phy_attach(struct net_device *dev, |
| struct device_node *phy_np, u32 flags, |
| phy_interface_t iface) |
| { |
| struct phy_device *phy = of_phy_find_device(phy_np); |
| int ret; |
| |
| if (!phy) |
| return NULL; |
| |
| ret = phy_attach_direct(dev, phy, flags, iface); |
| |
| /* refcount is held by phy_attach_direct() on success */ |
| put_device(&phy->mdio.dev); |
| |
| return ret ? NULL : phy; |
| } |
| EXPORT_SYMBOL(of_phy_attach); |
| |
| /* |
| * of_phy_is_fixed_link() and of_phy_register_fixed_link() must |
| * support two DT bindings: |
| * - the old DT binding, where 'fixed-link' was a property with 5 |
| * cells encoding various informations about the fixed PHY |
| * - the new DT binding, where 'fixed-link' is a sub-node of the |
| * Ethernet device. |
| */ |
| bool of_phy_is_fixed_link(struct device_node *np) |
| { |
| struct device_node *dn; |
| int len, err; |
| const char *managed; |
| |
| /* New binding */ |
| dn = of_get_child_by_name(np, "fixed-link"); |
| if (dn) { |
| of_node_put(dn); |
| return true; |
| } |
| |
| err = of_property_read_string(np, "managed", &managed); |
| if (err == 0 && strcmp(managed, "auto") != 0) |
| return true; |
| |
| /* Old binding */ |
| if (of_get_property(np, "fixed-link", &len) && |
| len == (5 * sizeof(__be32))) |
| return true; |
| |
| return false; |
| } |
| EXPORT_SYMBOL(of_phy_is_fixed_link); |
| |
| int of_phy_register_fixed_link(struct device_node *np) |
| { |
| struct fixed_phy_status status = {}; |
| struct device_node *fixed_link_node; |
| u32 fixed_link_prop[5]; |
| const char *managed; |
| |
| if (of_property_read_string(np, "managed", &managed) == 0 && |
| strcmp(managed, "in-band-status") == 0) { |
| /* status is zeroed, namely its .link member */ |
| goto register_phy; |
| } |
| |
| /* New binding */ |
| fixed_link_node = of_get_child_by_name(np, "fixed-link"); |
| if (fixed_link_node) { |
| status.link = 1; |
| status.duplex = of_property_read_bool(fixed_link_node, |
| "full-duplex"); |
| if (of_property_read_u32(fixed_link_node, "speed", |
| &status.speed)) { |
| of_node_put(fixed_link_node); |
| return -EINVAL; |
| } |
| status.pause = of_property_read_bool(fixed_link_node, "pause"); |
| status.asym_pause = of_property_read_bool(fixed_link_node, |
| "asym-pause"); |
| of_node_put(fixed_link_node); |
| |
| goto register_phy; |
| } |
| |
| /* Old binding */ |
| if (of_property_read_u32_array(np, "fixed-link", fixed_link_prop, |
| ARRAY_SIZE(fixed_link_prop)) == 0) { |
| status.link = 1; |
| status.duplex = fixed_link_prop[1]; |
| status.speed = fixed_link_prop[2]; |
| status.pause = fixed_link_prop[3]; |
| status.asym_pause = fixed_link_prop[4]; |
| goto register_phy; |
| } |
| |
| return -ENODEV; |
| |
| register_phy: |
| return PTR_ERR_OR_ZERO(fixed_phy_register(PHY_POLL, &status, np)); |
| } |
| EXPORT_SYMBOL(of_phy_register_fixed_link); |
| |
| void of_phy_deregister_fixed_link(struct device_node *np) |
| { |
| struct phy_device *phydev; |
| |
| phydev = of_phy_find_device(np); |
| if (!phydev) |
| return; |
| |
| fixed_phy_unregister(phydev); |
| |
| put_device(&phydev->mdio.dev); /* of_phy_find_device() */ |
| phy_device_free(phydev); /* fixed_phy_register() */ |
| } |
| EXPORT_SYMBOL(of_phy_deregister_fixed_link); |