| /* |
| * Setup pointers to hardware-dependent routines. |
| * |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 1996, 1997, 1998, 2001, 07, 08 by Ralf Baechle |
| * Copyright (C) 2001 MIPS Technologies, Inc. |
| * Copyright (C) 2007 by Thomas Bogendoerfer |
| */ |
| #include <linux/eisa.h> |
| #include <linux/init.h> |
| #include <linux/ioport.h> |
| #include <linux/console.h> |
| #include <linux/platform_device.h> |
| #include <linux/serial_8250.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/pgtable.h> |
| |
| #include <asm/jazz.h> |
| #include <asm/jazzdma.h> |
| #include <asm/reboot.h> |
| #include <asm/tlbmisc.h> |
| |
| extern asmlinkage void jazz_handle_int(void); |
| |
| extern void jazz_machine_restart(char *command); |
| |
| static struct resource jazz_io_resources[] = { |
| { |
| .start = 0x00, |
| .end = 0x1f, |
| .name = "dma1", |
| .flags = IORESOURCE_IO | IORESOURCE_BUSY |
| }, { |
| .start = 0x40, |
| .end = 0x5f, |
| .name = "timer", |
| .flags = IORESOURCE_IO | IORESOURCE_BUSY |
| }, { |
| .start = 0x80, |
| .end = 0x8f, |
| .name = "dma page reg", |
| .flags = IORESOURCE_IO | IORESOURCE_BUSY |
| }, { |
| .start = 0xc0, |
| .end = 0xdf, |
| .name = "dma2", |
| .flags = IORESOURCE_IO | IORESOURCE_BUSY |
| } |
| }; |
| |
| void __init plat_mem_setup(void) |
| { |
| int i; |
| |
| /* Map 0xe0000000 -> 0x0:800005C0, 0xe0010000 -> 0x1:30000580 */ |
| add_wired_entry(0x02000017, 0x03c00017, 0xe0000000, PM_64K); |
| /* Map 0xe2000000 -> 0x0:900005C0, 0xe3010000 -> 0x0:910005C0 */ |
| add_wired_entry(0x02400017, 0x02440017, 0xe2000000, PM_16M); |
| /* Map 0xe4000000 -> 0x0:600005C0, 0xe4100000 -> 400005C0 */ |
| add_wired_entry(0x01800017, 0x01000017, 0xe4000000, PM_4M); |
| |
| set_io_port_base(JAZZ_PORT_BASE); |
| #ifdef CONFIG_EISA |
| EISA_bus = 1; |
| #endif |
| |
| /* request I/O space for devices used on all i[345]86 PCs */ |
| for (i = 0; i < ARRAY_SIZE(jazz_io_resources); i++) |
| request_resource(&ioport_resource, jazz_io_resources + i); |
| |
| /* The RTC is outside the port address space */ |
| |
| _machine_restart = jazz_machine_restart; |
| |
| add_preferred_console("ttyS", 0, "9600"); |
| } |
| |
| #ifdef CONFIG_OLIVETTI_M700 |
| #define UART_CLK 1843200 |
| #else |
| /* Some Jazz machines seem to have an 8MHz crystal clock but I don't know |
| exactly which ones ... XXX */ |
| #define UART_CLK (8000000 / 16) /* ( 3072000 / 16) */ |
| #endif |
| |
| #define MEMPORT(_base, _irq) \ |
| { \ |
| .mapbase = (_base), \ |
| .membase = (void *)(_base), \ |
| .irq = (_irq), \ |
| .uartclk = UART_CLK, \ |
| .iotype = UPIO_MEM, \ |
| .flags = UPF_BOOT_AUTOCONF, \ |
| } |
| |
| static struct plat_serial8250_port jazz_serial_data[] = { |
| MEMPORT(JAZZ_SERIAL1_BASE, JAZZ_SERIAL1_IRQ), |
| MEMPORT(JAZZ_SERIAL2_BASE, JAZZ_SERIAL2_IRQ), |
| { }, |
| }; |
| |
| static struct platform_device jazz_serial8250_device = { |
| .name = "serial8250", |
| .id = PLAT8250_DEV_PLATFORM, |
| .dev = { |
| .platform_data = jazz_serial_data, |
| }, |
| }; |
| |
| static struct resource jazz_esp_rsrc[] = { |
| { |
| .start = JAZZ_SCSI_BASE, |
| .end = JAZZ_SCSI_BASE + 31, |
| .flags = IORESOURCE_MEM |
| }, |
| { |
| .start = JAZZ_SCSI_DMA, |
| .end = JAZZ_SCSI_DMA, |
| .flags = IORESOURCE_MEM |
| }, |
| { |
| .start = JAZZ_SCSI_IRQ, |
| .end = JAZZ_SCSI_IRQ, |
| .flags = IORESOURCE_IRQ |
| } |
| }; |
| |
| static u64 jazz_esp_dma_mask = DMA_BIT_MASK(32); |
| |
| static struct platform_device jazz_esp_pdev = { |
| .name = "jazz_esp", |
| .num_resources = ARRAY_SIZE(jazz_esp_rsrc), |
| .resource = jazz_esp_rsrc, |
| .dev = { |
| .dma_mask = &jazz_esp_dma_mask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| } |
| }; |
| |
| static struct resource jazz_sonic_rsrc[] = { |
| { |
| .start = JAZZ_ETHERNET_BASE, |
| .end = JAZZ_ETHERNET_BASE + 0xff, |
| .flags = IORESOURCE_MEM |
| }, |
| { |
| .start = JAZZ_ETHERNET_IRQ, |
| .end = JAZZ_ETHERNET_IRQ, |
| .flags = IORESOURCE_IRQ |
| } |
| }; |
| |
| static u64 jazz_sonic_dma_mask = DMA_BIT_MASK(32); |
| |
| static struct platform_device jazz_sonic_pdev = { |
| .name = "jazzsonic", |
| .num_resources = ARRAY_SIZE(jazz_sonic_rsrc), |
| .resource = jazz_sonic_rsrc, |
| .dev = { |
| .dma_mask = &jazz_sonic_dma_mask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| } |
| }; |
| |
| static struct resource jazz_cmos_rsrc[] = { |
| { |
| .start = 0x70, |
| .end = 0x71, |
| .flags = IORESOURCE_IO |
| }, |
| { |
| .start = 8, |
| .end = 8, |
| .flags = IORESOURCE_IRQ |
| } |
| }; |
| |
| static struct platform_device jazz_cmos_pdev = { |
| .name = "rtc_cmos", |
| .num_resources = ARRAY_SIZE(jazz_cmos_rsrc), |
| .resource = jazz_cmos_rsrc |
| }; |
| |
| static struct platform_device pcspeaker_pdev = { |
| .name = "pcspkr", |
| .id = -1, |
| }; |
| |
| static int __init jazz_setup_devinit(void) |
| { |
| platform_device_register(&jazz_serial8250_device); |
| platform_device_register(&jazz_esp_pdev); |
| platform_device_register(&jazz_sonic_pdev); |
| platform_device_register(&jazz_cmos_pdev); |
| platform_device_register(&pcspeaker_pdev); |
| |
| return 0; |
| } |
| |
| device_initcall(jazz_setup_devinit); |