blob: 89554021b5ccc40a0dd494221e90d3ce8f755d2a [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/* Copyright (c) 2022 Baylibre, SAS.
* Author: Jerome Brunet <jbrunet@baylibre.com>
*/
#include <linux/bitfield.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/mdio-mux.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#define ETH_REG2 0x0
#define REG2_PHYID GENMASK(21, 0)
#define EPHY_GXL_ID 0x110181
#define REG2_LEDACT GENMASK(23, 22)
#define REG2_LEDLINK GENMASK(25, 24)
#define REG2_DIV4SEL BIT(27)
#define REG2_ADCBYPASS BIT(30)
#define REG2_CLKINSEL BIT(31)
#define ETH_REG3 0x4
#define REG3_ENH BIT(3)
#define REG3_CFGMODE GENMASK(6, 4)
#define REG3_AUTOMDIX BIT(7)
#define REG3_PHYADDR GENMASK(12, 8)
#define REG3_PWRUPRST BIT(21)
#define REG3_PWRDOWN BIT(22)
#define REG3_LEDPOL BIT(23)
#define REG3_PHYMDI BIT(26)
#define REG3_CLKINEN BIT(29)
#define REG3_PHYIP BIT(30)
#define REG3_PHYEN BIT(31)
#define ETH_REG4 0x8
#define REG4_PWRUPRSTSIG BIT(0)
#define MESON_GXL_MDIO_EXTERNAL_ID 0
#define MESON_GXL_MDIO_INTERNAL_ID 1
struct gxl_mdio_mux {
void __iomem *regs;
void *mux_handle;
};
static void gxl_enable_internal_mdio(struct gxl_mdio_mux *priv)
{
u32 val;
/* Setup the internal phy */
val = (REG3_ENH |
FIELD_PREP(REG3_CFGMODE, 0x7) |
REG3_AUTOMDIX |
FIELD_PREP(REG3_PHYADDR, 8) |
REG3_LEDPOL |
REG3_PHYMDI |
REG3_CLKINEN |
REG3_PHYIP);
writel(REG4_PWRUPRSTSIG, priv->regs + ETH_REG4);
writel(val, priv->regs + ETH_REG3);
mdelay(10);
/* NOTE: The HW kept the phy id configurable at runtime.
* The id below is arbitrary. It is the one used in the vendor code.
* The only constraint is that it must match the one in
* drivers/net/phy/meson-gxl.c to properly match the PHY.
*/
writel(FIELD_PREP(REG2_PHYID, EPHY_GXL_ID),
priv->regs + ETH_REG2);
/* Enable the internal phy */
val |= REG3_PHYEN;
writel(val, priv->regs + ETH_REG3);
writel(0, priv->regs + ETH_REG4);
/* The phy needs a bit of time to power up */
mdelay(10);
}
static void gxl_enable_external_mdio(struct gxl_mdio_mux *priv)
{
/* Reset the mdio bus mux to the external phy */
writel(0, priv->regs + ETH_REG3);
}
static int gxl_mdio_switch_fn(int current_child, int desired_child,
void *data)
{
struct gxl_mdio_mux *priv = dev_get_drvdata(data);
if (current_child == desired_child)
return 0;
switch (desired_child) {
case MESON_GXL_MDIO_EXTERNAL_ID:
gxl_enable_external_mdio(priv);
break;
case MESON_GXL_MDIO_INTERNAL_ID:
gxl_enable_internal_mdio(priv);
break;
default:
return -EINVAL;
}
return 0;
}
static const struct of_device_id gxl_mdio_mux_match[] = {
{ .compatible = "amlogic,gxl-mdio-mux", },
{},
};
MODULE_DEVICE_TABLE(of, gxl_mdio_mux_match);
static int gxl_mdio_mux_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct gxl_mdio_mux *priv;
struct clk *rclk;
int ret;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
platform_set_drvdata(pdev, priv);
priv->regs = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(priv->regs))
return PTR_ERR(priv->regs);
rclk = devm_clk_get_enabled(dev, "ref");
if (IS_ERR(rclk))
return dev_err_probe(dev, PTR_ERR(rclk),
"failed to get reference clock\n");
ret = mdio_mux_init(dev, dev->of_node, gxl_mdio_switch_fn,
&priv->mux_handle, dev, NULL);
if (ret)
dev_err_probe(dev, ret, "mdio multiplexer init failed\n");
return ret;
}
static void gxl_mdio_mux_remove(struct platform_device *pdev)
{
struct gxl_mdio_mux *priv = platform_get_drvdata(pdev);
mdio_mux_uninit(priv->mux_handle);
}
static struct platform_driver gxl_mdio_mux_driver = {
.probe = gxl_mdio_mux_probe,
.remove_new = gxl_mdio_mux_remove,
.driver = {
.name = "gxl-mdio-mux",
.of_match_table = gxl_mdio_mux_match,
},
};
module_platform_driver(gxl_mdio_mux_driver);
MODULE_DESCRIPTION("Amlogic GXL MDIO multiplexer driver");
MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>");
MODULE_LICENSE("GPL");