| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Line 6 Linux USB driver |
| * |
| * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at) |
| */ |
| |
| #include <linux/slab.h> |
| |
| #include "midibuf.h" |
| |
| |
| static int midibuf_message_length(unsigned char code) |
| { |
| int message_length; |
| |
| if (code < 0x80) |
| message_length = -1; |
| else if (code < 0xf0) { |
| static const int length[] = { 3, 3, 3, 3, 2, 2, 3 }; |
| |
| message_length = length[(code >> 4) - 8]; |
| } else { |
| static const int length[] = { -1, 2, 2, 2, -1, -1, 1, 1, 1, -1, |
| 1, 1, 1, -1, 1, 1 |
| }; |
| message_length = length[code & 0x0f]; |
| } |
| |
| return message_length; |
| } |
| |
| static int midibuf_is_empty(struct midi_buffer *this) |
| { |
| return (this->pos_read == this->pos_write) && !this->full; |
| } |
| |
| static int midibuf_is_full(struct midi_buffer *this) |
| { |
| return this->full; |
| } |
| |
| void line6_midibuf_reset(struct midi_buffer *this) |
| { |
| this->pos_read = this->pos_write = this->full = 0; |
| this->command_prev = -1; |
| } |
| |
| int line6_midibuf_init(struct midi_buffer *this, int size, int split) |
| { |
| this->buf = kmalloc(size, GFP_KERNEL); |
| |
| if (this->buf == NULL) |
| return -ENOMEM; |
| |
| this->size = size; |
| this->split = split; |
| line6_midibuf_reset(this); |
| return 0; |
| } |
| |
| int line6_midibuf_bytes_free(struct midi_buffer *this) |
| { |
| return |
| midibuf_is_full(this) ? |
| 0 : |
| (this->pos_read - this->pos_write + this->size - 1) % this->size + |
| 1; |
| } |
| |
| int line6_midibuf_bytes_used(struct midi_buffer *this) |
| { |
| return |
| midibuf_is_empty(this) ? |
| 0 : |
| (this->pos_write - this->pos_read + this->size - 1) % this->size + |
| 1; |
| } |
| |
| int line6_midibuf_write(struct midi_buffer *this, unsigned char *data, |
| int length) |
| { |
| int bytes_free; |
| int length1, length2; |
| int skip_active_sense = 0; |
| |
| if (midibuf_is_full(this) || (length <= 0)) |
| return 0; |
| |
| /* skip trailing active sense */ |
| if (data[length - 1] == 0xfe) { |
| --length; |
| skip_active_sense = 1; |
| } |
| |
| bytes_free = line6_midibuf_bytes_free(this); |
| |
| if (length > bytes_free) |
| length = bytes_free; |
| |
| if (length > 0) { |
| length1 = this->size - this->pos_write; |
| |
| if (length < length1) { |
| /* no buffer wraparound */ |
| memcpy(this->buf + this->pos_write, data, length); |
| this->pos_write += length; |
| } else { |
| /* buffer wraparound */ |
| length2 = length - length1; |
| memcpy(this->buf + this->pos_write, data, length1); |
| memcpy(this->buf, data + length1, length2); |
| this->pos_write = length2; |
| } |
| |
| if (this->pos_write == this->pos_read) |
| this->full = 1; |
| } |
| |
| return length + skip_active_sense; |
| } |
| |
| int line6_midibuf_read(struct midi_buffer *this, unsigned char *data, |
| int length, int read_type) |
| { |
| int bytes_used; |
| int length1, length2; |
| int command; |
| int midi_length; |
| int repeat = 0; |
| int i; |
| |
| /* we need to be able to store at least a 3 byte MIDI message */ |
| if (length < 3) |
| return -EINVAL; |
| |
| if (midibuf_is_empty(this)) |
| return 0; |
| |
| bytes_used = line6_midibuf_bytes_used(this); |
| |
| if (length > bytes_used) |
| length = bytes_used; |
| |
| length1 = this->size - this->pos_read; |
| |
| command = this->buf[this->pos_read]; |
| /* |
| PODxt always has status byte lower nibble set to 0010, |
| when it means to send 0000, so we correct if here so |
| that control/program changes come on channel 1 and |
| sysex message status byte is correct |
| */ |
| if (read_type == LINE6_MIDIBUF_READ_RX) { |
| if (command == 0xb2 || command == 0xc2 || command == 0xf2) { |
| unsigned char fixed = command & 0xf0; |
| this->buf[this->pos_read] = fixed; |
| command = fixed; |
| } |
| } |
| |
| /* check MIDI command length */ |
| if (command & 0x80) { |
| midi_length = midibuf_message_length(command); |
| this->command_prev = command; |
| } else { |
| if (this->command_prev > 0) { |
| int midi_length_prev = |
| midibuf_message_length(this->command_prev); |
| |
| if (midi_length_prev > 1) { |
| midi_length = midi_length_prev - 1; |
| repeat = 1; |
| } else |
| midi_length = -1; |
| } else |
| midi_length = -1; |
| } |
| |
| if (midi_length < 0) { |
| /* search for end of message */ |
| if (length < length1) { |
| /* no buffer wraparound */ |
| for (i = 1; i < length; ++i) |
| if (this->buf[this->pos_read + i] & 0x80) |
| break; |
| |
| midi_length = i; |
| } else { |
| /* buffer wraparound */ |
| length2 = length - length1; |
| |
| for (i = 1; i < length1; ++i) |
| if (this->buf[this->pos_read + i] & 0x80) |
| break; |
| |
| if (i < length1) |
| midi_length = i; |
| else { |
| for (i = 0; i < length2; ++i) |
| if (this->buf[i] & 0x80) |
| break; |
| |
| midi_length = length1 + i; |
| } |
| } |
| |
| if (midi_length == length) |
| midi_length = -1; /* end of message not found */ |
| } |
| |
| if (midi_length < 0) { |
| if (!this->split) |
| return 0; /* command is not yet complete */ |
| } else { |
| if (length < midi_length) |
| return 0; /* command is not yet complete */ |
| |
| length = midi_length; |
| } |
| |
| if (length < length1) { |
| /* no buffer wraparound */ |
| memcpy(data + repeat, this->buf + this->pos_read, length); |
| this->pos_read += length; |
| } else { |
| /* buffer wraparound */ |
| length2 = length - length1; |
| memcpy(data + repeat, this->buf + this->pos_read, length1); |
| memcpy(data + repeat + length1, this->buf, length2); |
| this->pos_read = length2; |
| } |
| |
| if (repeat) |
| data[0] = this->command_prev; |
| |
| this->full = 0; |
| return length + repeat; |
| } |
| |
| int line6_midibuf_ignore(struct midi_buffer *this, int length) |
| { |
| int bytes_used = line6_midibuf_bytes_used(this); |
| |
| if (length > bytes_used) |
| length = bytes_used; |
| |
| this->pos_read = (this->pos_read + length) % this->size; |
| this->full = 0; |
| return length; |
| } |
| |
| void line6_midibuf_destroy(struct midi_buffer *this) |
| { |
| kfree(this->buf); |
| this->buf = NULL; |
| } |