blob: c5d66f272b0d091796fe965afa2a0352fa6e4a87 [file] [log] [blame]
/***********************license start***************
* Author: Cavium Networks
*
* Contact: support@caviumnetworks.com
* This file is part of the OCTEON SDK
*
* Copyright (c) 2003-2008 Cavium Networks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful, but
* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
* NONINFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this file; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
* or visit http://www.gnu.org/licenses/.
*
* This file may also be available under a different license from Cavium.
* Contact Cavium Networks for more information
***********************license end**************************************/
/**
* Interface to the hardware Packet Order / Work unit.
*
* New, starting with SDK 1.7.0, cvmx-pow supports a number of
* extended consistency checks. The define
* CVMX_ENABLE_POW_CHECKS controls the runtime insertion of POW
* internal state checks to find common programming errors. If
* CVMX_ENABLE_POW_CHECKS is not defined, checks are by default
* enabled. For example, cvmx-pow will check for the following
* program errors or POW state inconsistency.
* - Requesting a POW operation with an active tag switch in
* progress.
* - Waiting for a tag switch to complete for an excessively
* long period. This is normally a sign of an error in locking
* causing deadlock.
* - Illegal tag switches from NULL_NULL.
* - Illegal tag switches from NULL.
* - Illegal deschedule request.
* - WQE pointer not matching the one attached to the core by
* the POW.
*
*/
#ifndef __CVMX_POW_H__
#define __CVMX_POW_H__
#include <asm/octeon/cvmx-pow-defs.h>
#include "cvmx-scratch.h"
#include "cvmx-wqe.h"
/* Default to having all POW constancy checks turned on */
#ifndef CVMX_ENABLE_POW_CHECKS
#define CVMX_ENABLE_POW_CHECKS 1
#endif
enum cvmx_pow_tag_type {
/* Tag ordering is maintained */
CVMX_POW_TAG_TYPE_ORDERED = 0L,
/* Tag ordering is maintained, and at most one PP has the tag */
CVMX_POW_TAG_TYPE_ATOMIC = 1L,
/*
* The work queue entry from the order - NEVER tag switch from
* NULL to NULL
*/
CVMX_POW_TAG_TYPE_NULL = 2L,
/* A tag switch to NULL, and there is no space reserved in POW
* - NEVER tag switch to NULL_NULL
* - NEVER tag switch from NULL_NULL
* - NULL_NULL is entered at the beginning of time and on a deschedule.
* - NULL_NULL can be exited by a new work request. A NULL_SWITCH
* load can also switch the state to NULL
*/
CVMX_POW_TAG_TYPE_NULL_NULL = 3L
};
/**
* Wait flag values for pow functions.
*/
typedef enum {
CVMX_POW_WAIT = 1,
CVMX_POW_NO_WAIT = 0,
} cvmx_pow_wait_t;
/**
* POW tag operations. These are used in the data stored to the POW.
*/
typedef enum {
/*
* switch the tag (only) for this PP
* - the previous tag should be non-NULL in this case
* - tag switch response required
* - fields used: op, type, tag
*/
CVMX_POW_TAG_OP_SWTAG = 0L,
/*
* switch the tag for this PP, with full information
* - this should be used when the previous tag is NULL
* - tag switch response required
* - fields used: address, op, grp, type, tag
*/
CVMX_POW_TAG_OP_SWTAG_FULL = 1L,
/*
* switch the tag (and/or group) for this PP and de-schedule
* - OK to keep the tag the same and only change the group
* - fields used: op, no_sched, grp, type, tag
*/
CVMX_POW_TAG_OP_SWTAG_DESCH = 2L,
/*
* just de-schedule
* - fields used: op, no_sched
*/
CVMX_POW_TAG_OP_DESCH = 3L,
/*
* create an entirely new work queue entry
* - fields used: address, op, qos, grp, type, tag
*/
CVMX_POW_TAG_OP_ADDWQ = 4L,
/*
* just update the work queue pointer and grp for this PP
* - fields used: address, op, grp
*/
CVMX_POW_TAG_OP_UPDATE_WQP_GRP = 5L,
/*
* set the no_sched bit on the de-schedule list
*
* - does nothing if the selected entry is not on the
* de-schedule list
*
* - does nothing if the stored work queue pointer does not
* match the address field
*
* - fields used: address, index, op
*
* Before issuing a *_NSCHED operation, SW must guarantee
* that all prior deschedules and set/clr NSCHED operations
* are complete and all prior switches are complete. The
* hardware provides the opsdone bit and swdone bit for SW
* polling. After issuing a *_NSCHED operation, SW must
* guarantee that the set/clr NSCHED is complete before any
* subsequent operations.
*/
CVMX_POW_TAG_OP_SET_NSCHED = 6L,
/*
* clears the no_sched bit on the de-schedule list
*
* - does nothing if the selected entry is not on the
* de-schedule list
*
* - does nothing if the stored work queue pointer does not
* match the address field
*
* - fields used: address, index, op
*
* Before issuing a *_NSCHED operation, SW must guarantee that
* all prior deschedules and set/clr NSCHED operations are
* complete and all prior switches are complete. The hardware
* provides the opsdone bit and swdone bit for SW
* polling. After issuing a *_NSCHED operation, SW must
* guarantee that the set/clr NSCHED is complete before any
* subsequent operations.
*/
CVMX_POW_TAG_OP_CLR_NSCHED = 7L,
/* do nothing */
CVMX_POW_TAG_OP_NOP = 15L
} cvmx_pow_tag_op_t;
/**
* This structure defines the store data on a store to POW
*/
typedef union {
uint64_t u64;
struct {
/*
* Don't reschedule this entry. no_sched is used for
* CVMX_POW_TAG_OP_SWTAG_DESCH and
* CVMX_POW_TAG_OP_DESCH
*/
uint64_t no_sched:1;
uint64_t unused:2;
/* Tontains index of entry for a CVMX_POW_TAG_OP_*_NSCHED */
uint64_t index:13;
/* The operation to perform */
cvmx_pow_tag_op_t op:4;
uint64_t unused2:2;
/*
* The QOS level for the packet. qos is only used for
* CVMX_POW_TAG_OP_ADDWQ
*/
uint64_t qos:3;
/*
* The group that the work queue entry will be
* scheduled to grp is used for CVMX_POW_TAG_OP_ADDWQ,
* CVMX_POW_TAG_OP_SWTAG_FULL,
* CVMX_POW_TAG_OP_SWTAG_DESCH, and
* CVMX_POW_TAG_OP_UPDATE_WQP_GRP
*/
uint64_t grp:4;
/*
* The type of the tag. type is used for everything
* except CVMX_POW_TAG_OP_DESCH,
* CVMX_POW_TAG_OP_UPDATE_WQP_GRP, and
* CVMX_POW_TAG_OP_*_NSCHED
*/
uint64_t type:3;
/*
* The actual tag. tag is used for everything except
* CVMX_POW_TAG_OP_DESCH,
* CVMX_POW_TAG_OP_UPDATE_WQP_GRP, and
* CVMX_POW_TAG_OP_*_NSCHED
*/
uint64_t tag:32;
} s;
} cvmx_pow_tag_req_t;
/**
* This structure describes the address to load stuff from POW
*/
typedef union {
uint64_t u64;
/**
* Address for new work request loads (did<2:0> == 0)
*/
struct {
/* Mips64 address region. Should be CVMX_IO_SEG */
uint64_t mem_region:2;
/* Must be zero */
uint64_t reserved_49_61:13;
/* Must be one */
uint64_t is_io:1;
/* the ID of POW -- did<2:0> == 0 in this case */
uint64_t did:8;
/* Must be zero */
uint64_t reserved_4_39:36;
/*
* If set, don't return load response until work is
* available.
*/
uint64_t wait:1;
/* Must be zero */
uint64_t reserved_0_2:3;
} swork;
/**
* Address for loads to get POW internal status
*/
struct {
/* Mips64 address region. Should be CVMX_IO_SEG */
uint64_t mem_region:2;
/* Must be zero */
uint64_t reserved_49_61:13;
/* Must be one */
uint64_t is_io:1;
/* the ID of POW -- did<2:0> == 1 in this case */
uint64_t did:8;
/* Must be zero */
uint64_t reserved_10_39:30;
/* The core id to get status for */
uint64_t coreid:4;
/*
* If set and get_cur is set, return reverse tag-list
* pointer rather than forward tag-list pointer.
*/
uint64_t get_rev:1;
/*
* If set, return current status rather than pending
* status.
*/
uint64_t get_cur:1;
/*
* If set, get the work-queue pointer rather than
* tag/type.
*/
uint64_t get_wqp:1;
/* Must be zero */
uint64_t reserved_0_2:3;
} sstatus;
/**
* Address for memory loads to get POW internal state
*/
struct {
/* Mips64 address region. Should be CVMX_IO_SEG */
uint64_t mem_region:2;
/* Must be zero */
uint64_t reserved_49_61:13;
/* Must be one */
uint64_t is_io:1;
/* the ID of POW -- did<2:0> == 2 in this case */
uint64_t did:8;
/* Must be zero */
uint64_t reserved_16_39:24;
/* POW memory index */
uint64_t index:11;
/*
* If set, return deschedule information rather than
* the standard response for work-queue index (invalid
* if the work-queue entry is not on the deschedule
* list).
*/
uint64_t get_des:1;
/*
* If set, get the work-queue pointer rather than
* tag/type (no effect when get_des set).
*/
uint64_t get_wqp:1;
/* Must be zero */
uint64_t reserved_0_2:3;
} smemload;
/**
* Address for index/pointer loads
*/
struct {
/* Mips64 address region. Should be CVMX_IO_SEG */
uint64_t mem_region:2;
/* Must be zero */
uint64_t reserved_49_61:13;
/* Must be one */
uint64_t is_io:1;
/* the ID of POW -- did<2:0> == 3 in this case */
uint64_t did:8;
/* Must be zero */
uint64_t reserved_9_39:31;
/*
* when {get_rmt ==0 AND get_des_get_tail == 0}, this
* field selects one of eight POW internal-input
* queues (0-7), one per QOS level; values 8-15 are
* illegal in this case; when {get_rmt ==0 AND
* get_des_get_tail == 1}, this field selects one of
* 16 deschedule lists (per group); when get_rmt ==1,
* this field selects one of 16 memory-input queue
* lists. The two memory-input queue lists associated
* with each QOS level are:
*
* - qosgrp = 0, qosgrp = 8: QOS0
* - qosgrp = 1, qosgrp = 9: QOS1
* - qosgrp = 2, qosgrp = 10: QOS2
* - qosgrp = 3, qosgrp = 11: QOS3
* - qosgrp = 4, qosgrp = 12: QOS4
* - qosgrp = 5, qosgrp = 13: QOS5
* - qosgrp = 6, qosgrp = 14: QOS6
* - qosgrp = 7, qosgrp = 15: QOS7
*/
uint64_t qosgrp:4;
/*
* If set and get_rmt is clear, return deschedule list
* indexes rather than indexes for the specified qos
* level; if set and get_rmt is set, return the tail
* pointer rather than the head pointer for the
* specified qos level.
*/
uint64_t get_des_get_tail:1;
/*
* If set, return remote pointers rather than the
* local indexes for the specified qos level.
*/
uint64_t get_rmt:1;
/* Must be zero */
uint64_t reserved_0_2:3;
} sindexload;
/**
* address for NULL_RD request (did<2:0> == 4) when this is read,
* HW attempts to change the state to NULL if it is NULL_NULL (the
* hardware cannot switch from NULL_NULL to NULL if a POW entry is
* not available - software may need to recover by finishing
* another piece of work before a POW entry can ever become
* available.)
*/
struct {
/* Mips64 address region. Should be CVMX_IO_SEG */
uint64_t mem_region:2;
/* Must be zero */
uint64_t reserved_49_61:13;
/* Must be one */
uint64_t is_io:1;
/* the ID of POW -- did<2:0> == 4 in this case */
uint64_t did:8;
/* Must be zero */
uint64_t reserved_0_39:40;
} snull_rd;
} cvmx_pow_load_addr_t;
/**
* This structure defines the response to a load/SENDSINGLE to POW
* (except CSR reads)
*/
typedef union {
uint64_t u64;
/**
* Response to new work request loads
*/
struct {
/*
* Set when no new work queue entry was returned. *
* If there was de-scheduled work, the HW will
* definitely return it. When this bit is set, it
* could mean either mean:
*
* - There was no work, or
*
* - There was no work that the HW could find. This
* case can happen, regardless of the wait bit value
* in the original request, when there is work in
* the IQ's that is too deep down the list.
*/
uint64_t no_work:1;
/* Must be zero */
uint64_t reserved_40_62:23;
/* 36 in O1 -- the work queue pointer */
uint64_t addr:40;
} s_work;
/**
* Result for a POW Status Load (when get_cur==0 and get_wqp==0)
*/
struct {
uint64_t reserved_62_63:2;
/* Set when there is a pending non-NULL SWTAG or
* SWTAG_FULL, and the POW entry has not left the list
* for the original tag. */
uint64_t pend_switch:1;
/* Set when SWTAG_FULL and pend_switch is set. */
uint64_t pend_switch_full:1;
/*
* Set when there is a pending NULL SWTAG, or an
* implicit switch to NULL.
*/
uint64_t pend_switch_null:1;
/* Set when there is a pending DESCHED or SWTAG_DESCHED. */
uint64_t pend_desched:1;
/*
* Set when there is a pending SWTAG_DESCHED and
* pend_desched is set.
*/
uint64_t pend_desched_switch:1;
/* Set when nosched is desired and pend_desched is set. */
uint64_t pend_nosched:1;
/* Set when there is a pending GET_WORK. */
uint64_t pend_new_work:1;
/*
* When pend_new_work is set, this bit indicates that
* the wait bit was set.
*/
uint64_t pend_new_work_wait:1;
/* Set when there is a pending NULL_RD. */
uint64_t pend_null_rd:1;
/* Set when there is a pending CLR_NSCHED. */
uint64_t pend_nosched_clr:1;
uint64_t reserved_51:1;
/* This is the index when pend_nosched_clr is set. */
uint64_t pend_index:11;
/*
* This is the new_grp when (pend_desched AND
* pend_desched_switch) is set.
*/
uint64_t pend_grp:4;
uint64_t reserved_34_35:2;
/*
* This is the tag type when pend_switch or
* (pend_desched AND pend_desched_switch) are set.
*/
uint64_t pend_type:2;
/*
* - this is the tag when pend_switch or (pend_desched
* AND pend_desched_switch) are set.
*/
uint64_t pend_tag:32;
} s_sstatus0;
/**
* Result for a POW Status Load (when get_cur==0 and get_wqp==1)
*/
struct {
uint64_t reserved_62_63:2;
/*
* Set when there is a pending non-NULL SWTAG or
* SWTAG_FULL, and the POW entry has not left the list
* for the original tag.
*/
uint64_t pend_switch:1;
/* Set when SWTAG_FULL and pend_switch is set. */
uint64_t pend_switch_full:1;
/*
* Set when there is a pending NULL SWTAG, or an
* implicit switch to NULL.
*/
uint64_t pend_switch_null:1;
/*
* Set when there is a pending DESCHED or
* SWTAG_DESCHED.
*/
uint64_t pend_desched:1;
/*
* Set when there is a pending SWTAG_DESCHED and
* pend_desched is set.
*/
uint64_t pend_desched_switch:1;
/* Set when nosched is desired and pend_desched is set. */
uint64_t pend_nosched:1;
/* Set when there is a pending GET_WORK. */
uint64_t pend_new_work:1;
/*
* When pend_new_work is set, this bit indicates that
* the wait bit was set.
*/
uint64_t pend_new_work_wait:1;
/* Set when there is a pending NULL_RD. */
uint64_t pend_null_rd:1;
/* Set when there is a pending CLR_NSCHED. */
uint64_t pend_nosched_clr:1;
uint64_t reserved_51:1;
/* This is the index when pend_nosched_clr is set. */
uint64_t pend_index:11;
/*
* This is the new_grp when (pend_desched AND
* pend_desched_switch) is set.
*/
uint64_t pend_grp:4;
/* This is the wqp when pend_nosched_clr is set. */
uint64_t pend_wqp:36;
} s_sstatus1;
/**
* Result for a POW Status Load (when get_cur==1, get_wqp==0, and
* get_rev==0)
*/
struct {
uint64_t reserved_62_63:2;
/*
* Points to the next POW entry in the tag list when
* tail == 0 (and tag_type is not NULL or NULL_NULL).
*/
uint64_t link_index:11;
/* The POW entry attached to the core. */
uint64_t index:11;
/*
* The group attached to the core (updated when new
* tag list entered on SWTAG_FULL).
*/
uint64_t grp:4;
/*
* Set when this POW entry is at the head of its tag
* list (also set when in the NULL or NULL_NULL
* state).
*/
uint64_t head:1;
/*
* Set when this POW entry is at the tail of its tag
* list (also set when in the NULL or NULL_NULL
* state).
*/
uint64_t tail:1;
/*
* The tag type attached to the core (updated when new
* tag list entered on SWTAG, SWTAG_FULL, or
* SWTAG_DESCHED).
*/
uint64_t tag_type:2;
/*
* The tag attached to the core (updated when new tag
* list entered on SWTAG, SWTAG_FULL, or
* SWTAG_DESCHED).
*/
uint64_t tag:32;
} s_sstatus2;
/**
* Result for a POW Status Load (when get_cur==1, get_wqp==0, and get_rev==1)
*/
struct {
uint64_t reserved_62_63:2;
/*
* Points to the prior POW entry in the tag list when
* head == 0 (and tag_type is not NULL or
* NULL_NULL). This field is unpredictable when the
* core's state is NULL or NULL_NULL.
*/
uint64_t revlink_index:11;
/* The POW entry attached to the core. */
uint64_t index:11;
/*
* The group attached to the core (updated when new
* tag list entered on SWTAG_FULL).
*/
uint64_t grp:4;
/* Set when this POW entry is at the head of its tag
* list (also set when in the NULL or NULL_NULL
* state).
*/
uint64_t head:1;
/*
* Set when this POW entry is at the tail of its tag
* list (also set when in the NULL or NULL_NULL
* state).
*/
uint64_t tail:1;
/*
* The tag type attached to the core (updated when new
* tag list entered on SWTAG, SWTAG_FULL, or
* SWTAG_DESCHED).
*/
uint64_t tag_type:2;
/*
* The tag attached to the core (updated when new tag
* list entered on SWTAG, SWTAG_FULL, or
* SWTAG_DESCHED).
*/
uint64_t tag:32;
} s_sstatus3;
/**
* Result for a POW Status Load (when get_cur==1, get_wqp==1, and
* get_rev==0)
*/
struct {
uint64_t reserved_62_63:2;
/*
* Points to the next POW entry in the tag list when
* tail == 0 (and tag_type is not NULL or NULL_NULL).
*/
uint64_t link_index:11;
/* The POW entry attached to the core. */
uint64_t index:11;
/*
* The group attached to the core (updated when new
* tag list entered on SWTAG_FULL).
*/
uint64_t grp:4;
/*
* The wqp attached to the core (updated when new tag
* list entered on SWTAG_FULL).
*/
uint64_t wqp:36;
} s_sstatus4;
/**
* Result for a POW Status Load (when get_cur==1, get_wqp==1, and
* get_rev==1)
*/
struct {
uint64_t reserved_62_63:2;
/*
* Points to the prior POW entry in the tag list when
* head == 0 (and tag_type is not NULL or
* NULL_NULL). This field is unpredictable when the
* core's state is NULL or NULL_NULL.
*/
uint64_t revlink_index:11;
/* The POW entry attached to the core. */
uint64_t index:11;
/*
* The group attached to the core (updated when new
* tag list entered on SWTAG_FULL).
*/
uint64_t grp:4;
/*
* The wqp attached to the core (updated when new tag
* list entered on SWTAG_FULL).
*/
uint64_t wqp:36;
} s_sstatus5;
/**
* Result For POW Memory Load (get_des == 0 and get_wqp == 0)
*/
struct {
uint64_t reserved_51_63:13;
/*
* The next entry in the input, free, descheduled_head
* list (unpredictable if entry is the tail of the
* list).
*/
uint64_t next_index:11;
/* The group of the POW entry. */
uint64_t grp:4;
uint64_t reserved_35:1;
/*
* Set when this POW entry is at the tail of its tag
* list (also set when in the NULL or NULL_NULL
* state).
*/
uint64_t tail:1;
/* The tag type of the POW entry. */
uint64_t tag_type:2;
/* The tag of the POW entry. */
uint64_t tag:32;
} s_smemload0;
/**
* Result For POW Memory Load (get_des == 0 and get_wqp == 1)
*/
struct {
uint64_t reserved_51_63:13;
/*
* The next entry in the input, free, descheduled_head
* list (unpredictable if entry is the tail of the
* list).
*/
uint64_t next_index:11;
/* The group of the POW entry. */
uint64_t grp:4;
/* The WQP held in the POW entry. */
uint64_t wqp:36;
} s_smemload1;
/**
* Result For POW Memory Load (get_des == 1)
*/
struct {
uint64_t reserved_51_63:13;
/*
* The next entry in the tag list connected to the
* descheduled head.
*/
uint64_t fwd_index:11;
/* The group of the POW entry. */
uint64_t grp:4;
/* The nosched bit for the POW entry. */
uint64_t nosched:1;
/* There is a pending tag switch */
uint64_t pend_switch:1;
/*
* The next tag type for the new tag list when
* pend_switch is set.
*/
uint64_t pend_type:2;
/*
* The next tag for the new tag list when pend_switch
* is set.
*/
uint64_t pend_tag:32;
} s_smemload2;
/**
* Result For POW Index/Pointer Load (get_rmt == 0/get_des_get_tail == 0)
*/
struct {
uint64_t reserved_52_63:12;
/*
* set when there is one or more POW entries on the
* free list.
*/
uint64_t free_val:1;
/*
* set when there is exactly one POW entry on the free
* list.
*/
uint64_t free_one:1;
uint64_t reserved_49:1;
/*
* when free_val is set, indicates the first entry on
* the free list.
*/
uint64_t free_head:11;
uint64_t reserved_37:1;
/*
* when free_val is set, indicates the last entry on
* the free list.
*/
uint64_t free_tail:11;
/*
* set when there is one or more POW entries on the
* input Q list selected by qosgrp.
*/
uint64_t loc_val:1;
/*
* set when there is exactly one POW entry on the
* input Q list selected by qosgrp.
*/
uint64_t loc_one:1;
uint64_t reserved_23:1;
/*
* when loc_val is set, indicates the first entry on
* the input Q list selected by qosgrp.
*/
uint64_t loc_head:11;
uint64_t reserved_11:1;
/*
* when loc_val is set, indicates the last entry on
* the input Q list selected by qosgrp.
*/
uint64_t loc_tail:11;
} sindexload0;
/**
* Result For POW Index/Pointer Load (get_rmt == 0/get_des_get_tail == 1)
*/
struct {
uint64_t reserved_52_63:12;
/*
* set when there is one or more POW entries on the
* nosched list.
*/
uint64_t nosched_val:1;
/*
* set when there is exactly one POW entry on the
* nosched list.
*/
uint64_t nosched_one:1;
uint64_t reserved_49:1;
/*
* when nosched_val is set, indicates the first entry
* on the nosched list.
*/
uint64_t nosched_head:11;
uint64_t reserved_37:1;
/*
* when nosched_val is set, indicates the last entry
* on the nosched list.
*/
uint64_t nosched_tail:11;
/*
* set when there is one or more descheduled heads on
* the descheduled list selected by qosgrp.
*/
uint64_t des_val:1;
/*
* set when there is exactly one descheduled head on
* the descheduled list selected by qosgrp.
*/
uint64_t des_one:1;
uint64_t reserved_23:1;
/*
* when des_val is set, indicates the first
* descheduled head on the descheduled list selected
* by qosgrp.
*/
uint64_t des_head:11;
uint64_t reserved_11:1;
/*
* when des_val is set, indicates the last descheduled
* head on the descheduled list selected by qosgrp.
*/
uint64_t des_tail:11;
} sindexload1;
/**
* Result For POW Index/Pointer Load (get_rmt == 1/get_des_get_tail == 0)
*/
struct {
uint64_t reserved_39_63:25;
/*
* Set when this DRAM list is the current head
* (i.e. is the next to be reloaded when the POW
* hardware reloads a POW entry from DRAM). The POW
* hardware alternates between the two DRAM lists
* associated with a QOS level when it reloads work
* from DRAM into the POW unit.
*/
uint64_t rmt_is_head:1;
/*
* Set when the DRAM portion of the input Q list
* selected by qosgrp contains one or more pieces of
* work.
*/
uint64_t rmt_val:1;
/*
* Set when the DRAM portion of the input Q list
* selected by qosgrp contains exactly one piece of
* work.
*/
uint64_t rmt_one:1;
/*
* When rmt_val is set, indicates the first piece of
* work on the DRAM input Q list selected by
* qosgrp.
*/
uint64_t rmt_head:36;
} sindexload2;
/**
* Result For POW Index/Pointer Load (get_rmt ==
* 1/get_des_get_tail == 1)
*/
struct {
uint64_t reserved_39_63:25;
/*
* set when this DRAM list is the current head
* (i.e. is the next to be reloaded when the POW
* hardware reloads a POW entry from DRAM). The POW
* hardware alternates between the two DRAM lists
* associated with a QOS level when it reloads work
* from DRAM into the POW unit.
*/
uint64_t rmt_is_head:1;
/*
* set when the DRAM portion of the input Q list
* selected by qosgrp contains one or more pieces of
* work.
*/
uint64_t rmt_val:1;
/*
* set when the DRAM portion of the input Q list
* selected by qosgrp contains exactly one piece of
* work.
*/
uint64_t rmt_one:1;
/*
* when rmt_val is set, indicates the last piece of
* work on the DRAM input Q list selected by
* qosgrp.
*/
uint64_t rmt_tail:36;
} sindexload3;
/**
* Response to NULL_RD request loads
*/
struct {
uint64_t unused:62;
/* of type cvmx_pow_tag_type_t. state is one of the
* following:
*
* - CVMX_POW_TAG_TYPE_ORDERED
* - CVMX_POW_TAG_TYPE_ATOMIC
* - CVMX_POW_TAG_TYPE_NULL
* - CVMX_POW_TAG_TYPE_NULL_NULL
*/
uint64_t state:2;
} s_null_rd;
} cvmx_pow_tag_load_resp_t;
/**
* This structure describes the address used for stores to the POW.
* The store address is meaningful on stores to the POW. The
* hardware assumes that an aligned 64-bit store was used for all
* these stores. Note the assumption that the work queue entry is
* aligned on an 8-byte boundary (since the low-order 3 address bits
* must be zero). Note that not all fields are used by all
* operations.
*
* NOTE: The following is the behavior of the pending switch bit at the PP
* for POW stores (i.e. when did<7:3> == 0xc)
* - did<2:0> == 0 => pending switch bit is set
* - did<2:0> == 1 => no affect on the pending switch bit
* - did<2:0> == 3 => pending switch bit is cleared
* - did<2:0> == 7 => no affect on the pending switch bit
* - did<2:0> == others => must not be used
* - No other loads/stores have an affect on the pending switch bit
* - The switch bus from POW can clear the pending switch bit
*
* NOTE: did<2:0> == 2 is used by the HW for a special single-cycle
* ADDWQ command that only contains the pointer). SW must never use
* did<2:0> == 2.
*/
typedef union {
/**
* Unsigned 64 bit integer representation of store address
*/
uint64_t u64;
struct {
/* Memory region. Should be CVMX_IO_SEG in most cases */
uint64_t mem_reg:2;
uint64_t reserved_49_61:13; /* Must be zero */
uint64_t is_io:1; /* Must be one */
/* Device ID of POW. Note that different sub-dids are used. */
uint64_t did:8;
uint64_t reserved_36_39:4; /* Must be zero */
/* Address field. addr<2:0> must be zero */
uint64_t addr:36;
} stag;
} cvmx_pow_tag_store_addr_t;
/**
* decode of the store data when an IOBDMA SENDSINGLE is sent to POW
*/
typedef union {
uint64_t u64;
struct {
/*
* the (64-bit word) location in scratchpad to write
* to (if len != 0)
*/
uint64_t scraddr:8;
/* the number of words in the response (0 => no response) */
uint64_t len:8;
/* the ID of the device on the non-coherent bus */
uint64_t did:8;
uint64_t unused:36;
/* if set, don't return load response until work is available */
uint64_t wait:1;
uint64_t unused2:3;
} s;
} cvmx_pow_iobdma_store_t;
/* CSR typedefs have been moved to cvmx-csr-*.h */
/**
* Get the POW tag for this core. This returns the current
* tag type, tag, group, and POW entry index associated with
* this core. Index is only valid if the tag type isn't NULL_NULL.
* If a tag switch is pending this routine returns the tag before
* the tag switch, not after.
*
* Returns Current tag
*/
static inline cvmx_pow_tag_req_t cvmx_pow_get_current_tag(void)
{
cvmx_pow_load_addr_t load_addr;
cvmx_pow_tag_load_resp_t load_resp;
cvmx_pow_tag_req_t result;
load_addr.u64 = 0;
load_addr.sstatus.mem_region = CVMX_IO_SEG;
load_addr.sstatus.is_io = 1;
load_addr.sstatus.did = CVMX_OCT_DID_TAG_TAG1;
load_addr.sstatus.coreid = cvmx_get_core_num();
load_addr.sstatus.get_cur = 1;
load_resp.u64 = cvmx_read_csr(load_addr.u64);
result.u64 = 0;
result.s.grp = load_resp.s_sstatus2.grp;
result.s.index = load_resp.s_sstatus2.index;
result.s.type = load_resp.s_sstatus2.tag_type;
result.s.tag = load_resp.s_sstatus2.tag;
return result;
}
/**
* Get the POW WQE for this core. This returns the work queue
* entry currently associated with this core.
*
* Returns WQE pointer
*/
static inline cvmx_wqe_t *cvmx_pow_get_current_wqp(void)
{
cvmx_pow_load_addr_t load_addr;
cvmx_pow_tag_load_resp_t load_resp;
load_addr.u64 = 0;
load_addr.sstatus.mem_region = CVMX_IO_SEG;
load_addr.sstatus.is_io = 1;
load_addr.sstatus.did = CVMX_OCT_DID_TAG_TAG1;
load_addr.sstatus.coreid = cvmx_get_core_num();
load_addr.sstatus.get_cur = 1;
load_addr.sstatus.get_wqp = 1;
load_resp.u64 = cvmx_read_csr(load_addr.u64);
return (cvmx_wqe_t *) cvmx_phys_to_ptr(load_resp.s_sstatus4.wqp);
}
#ifndef CVMX_MF_CHORD
#define CVMX_MF_CHORD(dest) CVMX_RDHWR(dest, 30)
#endif
/**
* Print a warning if a tag switch is pending for this core
*
* @function: Function name checking for a pending tag switch
*/
static inline void __cvmx_pow_warn_if_pending_switch(const char *function)
{
uint64_t switch_complete;
CVMX_MF_CHORD(switch_complete);
if (!switch_complete)
pr_warning("%s called with tag switch in progress\n", function);
}
/**
* Waits for a tag switch to complete by polling the completion bit.
* Note that switches to NULL complete immediately and do not need
* to be waited for.
*/
static inline void cvmx_pow_tag_sw_wait(void)
{
const uint64_t MAX_CYCLES = 1ull << 31;
uint64_t switch_complete;
uint64_t start_cycle = cvmx_get_cycle();
while (1) {
CVMX_MF_CHORD(switch_complete);
if (unlikely(switch_complete))
break;
if (unlikely(cvmx_get_cycle() > start_cycle + MAX_CYCLES)) {
pr_warning("Tag switch is taking a long time, "
"possible deadlock\n");
start_cycle = -MAX_CYCLES - 1;
}
}
}
/**
* Synchronous work request. Requests work from the POW.
* This function does NOT wait for previous tag switches to complete,
* so the caller must ensure that there is not a pending tag switch.
*
* @wait: When set, call stalls until work becomes avaiable, or times out.
* If not set, returns immediately.
*
* Returns Returns the WQE pointer from POW. Returns NULL if no work
* was available.
*/
static inline cvmx_wqe_t *cvmx_pow_work_request_sync_nocheck(cvmx_pow_wait_t
wait)
{
cvmx_pow_load_addr_t ptr;
cvmx_pow_tag_load_resp_t result;
if (CVMX_ENABLE_POW_CHECKS)
__cvmx_pow_warn_if_pending_switch(__func__);
ptr.u64 = 0;
ptr.swork.mem_region = CVMX_IO_SEG;
ptr.swork.is_io = 1;
ptr.swork.did = CVMX_OCT_DID_TAG_SWTAG;
ptr.swork.wait = wait;
result.u64 = cvmx_read_csr(ptr.u64);
if (result.s_work.no_work)
return NULL;
else
return (cvmx_wqe_t *) cvmx_phys_to_ptr(result.s_work.addr);
}
/**
* Synchronous work request. Requests work from the POW.
* This function waits for any previous tag switch to complete before
* requesting the new work.
*
* @wait: When set, call stalls until work becomes avaiable, or times out.
* If not set, returns immediately.
*
* Returns Returns the WQE pointer from POW. Returns NULL if no work
* was available.
*/
static inline cvmx_wqe_t *cvmx_pow_work_request_sync(cvmx_pow_wait_t wait)
{
if (CVMX_ENABLE_POW_CHECKS)
__cvmx_pow_warn_if_pending_switch(__func__);
/* Must not have a switch pending when requesting work */
cvmx_pow_tag_sw_wait();
return cvmx_pow_work_request_sync_nocheck(wait);
}
/**
* Synchronous null_rd request. Requests a switch out of NULL_NULL POW state.
* This function waits for any previous tag switch to complete before
* requesting the null_rd.
*
* Returns Returns the POW state of type cvmx_pow_tag_type_t.
*/
static inline enum cvmx_pow_tag_type cvmx_pow_work_request_null_rd(void)
{
cvmx_pow_load_addr_t ptr;
cvmx_pow_tag_load_resp_t result;
if (CVMX_ENABLE_POW_CHECKS)
__cvmx_pow_warn_if_pending_switch(__func__);
/* Must not have a switch pending when requesting work */
cvmx_pow_tag_sw_wait();
ptr.u64 = 0;
ptr.snull_rd.mem_region = CVMX_IO_SEG;
ptr.snull_rd.is_io = 1;
ptr.snull_rd.did = CVMX_OCT_DID_TAG_NULL_RD;
result.u64 = cvmx_read_csr(ptr.u64);
return (enum cvmx_pow_tag_type) result.s_null_rd.state;
}
/**
* Asynchronous work request. Work is requested from the POW unit,
* and should later be checked with function
* cvmx_pow_work_response_async. This function does NOT wait for
* previous tag switches to complete, so the caller must ensure that
* there is not a pending tag switch.
*
* @scr_addr: Scratch memory address that response will be returned
* to, which is either a valid WQE, or a response with the
* invalid bit set. Byte address, must be 8 byte aligned.
*
* @wait: 1 to cause response to wait for work to become available (or
* timeout), 0 to cause response to return immediately
*/
static inline void cvmx_pow_work_request_async_nocheck(int scr_addr,
cvmx_pow_wait_t wait)
{
cvmx_pow_iobdma_store_t data;
if (CVMX_ENABLE_POW_CHECKS)
__cvmx_pow_warn_if_pending_switch(__func__);
/* scr_addr must be 8 byte aligned */
data.s.scraddr = scr_addr >> 3;
data.s.len = 1;
data.s.did = CVMX_OCT_DID_TAG_SWTAG;
data.s.wait = wait;
cvmx_send_single(data.u64);
}
/**
* Asynchronous work request. Work is requested from the POW unit,
* and should later be checked with function
* cvmx_pow_work_response_async. This function waits for any previous
* tag switch to complete before requesting the new work.
*
* @scr_addr: Scratch memory address that response will be returned
* to, which is either a valid WQE, or a response with the
* invalid bit set. Byte address, must be 8 byte aligned.
*
* @wait: 1 to cause response to wait for work to become available (or
* timeout), 0 to cause response to return immediately
*/
static inline void cvmx_pow_work_request_async(int scr_addr,
cvmx_pow_wait_t wait)
{
if (CVMX_ENABLE_POW_CHECKS)
__cvmx_pow_warn_if_pending_switch(__func__);
/* Must not have a switch pending when requesting work */
cvmx_pow_tag_sw_wait();
cvmx_pow_work_request_async_nocheck(scr_addr, wait);
}
/**
* Gets result of asynchronous work request. Performs a IOBDMA sync
* to wait for the response.
*
* @scr_addr: Scratch memory address to get result from Byte address,
* must be 8 byte aligned.
*
* Returns Returns the WQE from the scratch register, or NULL if no
* work was available.
*/
static inline cvmx_wqe_t *cvmx_pow_work_response_async(int scr_addr)
{
cvmx_pow_tag_load_resp_t result;
CVMX_SYNCIOBDMA;
result.u64 = cvmx_scratch_read64(scr_addr);
if (result.s_work.no_work)
return NULL;
else
return (cvmx_wqe_t *) cvmx_phys_to_ptr(result.s_work.addr);
}
/**
* Checks if a work queue entry pointer returned by a work
* request is valid. It may be invalid due to no work
* being available or due to a timeout.
*
* @wqe_ptr: pointer to a work queue entry returned by the POW
*
* Returns 0 if pointer is valid
* 1 if invalid (no work was returned)
*/
static inline uint64_t cvmx_pow_work_invalid(cvmx_wqe_t *wqe_ptr)
{
return wqe_ptr == NULL;
}
/**
* Starts a tag switch to the provided tag value and tag type.
* Completion for the tag switch must be checked for separately. This
* function does NOT update the work queue entry in dram to match tag
* value and type, so the application must keep track of these if they
* are important to the application. This tag switch command must not
* be used for switches to NULL, as the tag switch pending bit will be
* set by the switch request, but never cleared by the hardware.
*
* NOTE: This should not be used when switching from a NULL tag. Use
* cvmx_pow_tag_sw_full() instead.
*
* This function does no checks, so the caller must ensure that any
* previous tag switch has completed.
*
* @tag: new tag value
* @tag_type: new tag type (ordered or atomic)
*/
static inline void cvmx_pow_tag_sw_nocheck(uint32_t tag,
enum cvmx_pow_tag_type tag_type)
{
cvmx_addr_t ptr;
cvmx_pow_tag_req_t tag_req;
if (CVMX_ENABLE_POW_CHECKS) {
cvmx_pow_tag_req_t current_tag;
__cvmx_pow_warn_if_pending_switch(__func__);
current_tag = cvmx_pow_get_current_tag();
if (current_tag.s.type == CVMX_POW_TAG_TYPE_NULL_NULL)
pr_warning("%s called with NULL_NULL tag\n",
__func__);
if (current_tag.s.type == CVMX_POW_TAG_TYPE_NULL)
pr_warning("%s called with NULL tag\n", __func__);
if ((current_tag.s.type == tag_type)
&& (current_tag.s.tag == tag))
pr_warning("%s called to perform a tag switch to the "
"same tag\n",
__func__);
if (tag_type == CVMX_POW_TAG_TYPE_NULL)
pr_warning("%s called to perform a tag switch to "
"NULL. Use cvmx_pow_tag_sw_null() instead\n",
__func__);
}
/*
* Note that WQE in DRAM is not updated here, as the POW does
* not read from DRAM once the WQE is in flight. See hardware
* manual for complete details. It is the application's
* responsibility to keep track of the current tag value if
* that is important.
*/
tag_req.u64 = 0;
tag_req.s.op = CVMX_POW_TAG_OP_SWTAG;
tag_req.s.tag = tag;
tag_req.s.type = tag_type;
ptr.u64 = 0;
ptr.sio.mem_region = CVMX_IO_SEG;
ptr.sio.is_io = 1;
ptr.sio.did = CVMX_OCT_DID_TAG_SWTAG;
/* once this store arrives at POW, it will attempt the switch
software must wait for the switch to complete separately */
cvmx_write_io(ptr.u64, tag_req.u64);
}
/**
* Starts a tag switch to the provided tag value and tag type.
* Completion for the tag switch must be checked for separately. This
* function does NOT update the work queue entry in dram to match tag
* value and type, so the application must keep track of these if they
* are important to the application. This tag switch command must not
* be used for switches to NULL, as the tag switch pending bit will be
* set by the switch request, but never cleared by the hardware.
*
* NOTE: This should not be used when switching from a NULL tag. Use
* cvmx_pow_tag_sw_full() instead.
*
* This function waits for any previous tag switch to complete, and also
* displays an error on tag switches to NULL.
*
* @tag: new tag value
* @tag_type: new tag type (ordered or atomic)
*/
static inline void cvmx_pow_tag_sw(uint32_t tag,
enum cvmx_pow_tag_type tag_type)
{
if (CVMX_ENABLE_POW_CHECKS)
__cvmx_pow_warn_if_pending_switch(__func__);
/*
* Note that WQE in DRAM is not updated here, as the POW does
* not read from DRAM once the WQE is in flight. See hardware
* manual for complete details. It is the application's
* responsibility to keep track of the current tag value if
* that is important.
*/
/*
* Ensure that there is not a pending tag switch, as a tag
* switch cannot be started if a previous switch is still
* pending.
*/
cvmx_pow_tag_sw_wait();
cvmx_pow_tag_sw_nocheck(tag, tag_type);
}
/**
* Starts a tag switch to the provided tag value and tag type.
* Completion for the tag switch must be checked for separately. This
* function does NOT update the work queue entry in dram to match tag
* value and type, so the application must keep track of these if they
* are important to the application. This tag switch command must not
* be used for switches to NULL, as the tag switch pending bit will be
* set by the switch request, but never cleared by the hardware.
*
* This function must be used for tag switches from NULL.
*
* This function does no checks, so the caller must ensure that any
* previous tag switch has completed.
*
* @wqp: pointer to work queue entry to submit. This entry is
* updated to match the other parameters
* @tag: tag value to be assigned to work queue entry
* @tag_type: type of tag
* @group: group value for the work queue entry.
*/
static inline void cvmx_pow_tag_sw_full_nocheck(cvmx_wqe_t *wqp, uint32_t tag,
enum cvmx_pow_tag_type tag_type,
uint64_t group)
{
cvmx_addr_t ptr;
cvmx_pow_tag_req_t tag_req;
if (CVMX_ENABLE_POW_CHECKS) {
cvmx_pow_tag_req_t current_tag;
__cvmx_pow_warn_if_pending_switch(__func__);
current_tag = cvmx_pow_get_current_tag();
if (current_tag.s.type == CVMX_POW_TAG_TYPE_NULL_NULL)
pr_warning("%s called with NULL_NULL tag\n",
__func__);
if ((current_tag.s.type == tag_type)
&& (current_tag.s.tag == tag))
pr_warning("%s called to perform a tag switch to "
"the same tag\n",
__func__);
if (tag_type == CVMX_POW_TAG_TYPE_NULL)
pr_warning("%s called to perform a tag switch to "
"NULL. Use cvmx_pow_tag_sw_null() instead\n",
__func__);
if (wqp != cvmx_phys_to_ptr(0x80))
if (wqp != cvmx_pow_get_current_wqp())
pr_warning("%s passed WQE(%p) doesn't match "
"the address in the POW(%p)\n",
__func__, wqp,
cvmx_pow_get_current_wqp());
}
/*
* Note that WQE in DRAM is not updated here, as the POW does
* not read from DRAM once the WQE is in flight. See hardware
* manual for complete details. It is the application's
* responsibility to keep track of the current tag value if
* that is important.
*/
tag_req.u64 = 0;
tag_req.s.op = CVMX_POW_TAG_OP_SWTAG_FULL;
tag_req.s.tag = tag;
tag_req.s.type = tag_type;
tag_req.s.grp = group;
ptr.u64 = 0;
ptr.sio.mem_region = CVMX_IO_SEG;
ptr.sio.is_io = 1;
ptr.sio.did = CVMX_OCT_DID_TAG_SWTAG;
ptr.sio.offset = CAST64(wqp);
/*
* once this store arrives at POW, it will attempt the switch
* software must wait for the switch to complete separately.
*/
cvmx_write_io(ptr.u64, tag_req.u64);
}
/**
* Starts a tag switch to the provided tag value and tag type.
* Completion for the tag switch must be checked for separately. This
* function does NOT update the work queue entry in dram to match tag
* value and type, so the application must keep track of these if they
* are important to the application. This tag switch command must not
* be used for switches to NULL, as the tag switch pending bit will be
* set by the switch request, but never cleared by the hardware.
*
* This function must be used for tag switches from NULL.
*
* This function waits for any pending tag switches to complete
* before requesting the tag switch.
*
* @wqp: pointer to work queue entry to submit. This entry is updated
* to match the other parameters
* @tag: tag value to be assigned to work queue entry
* @tag_type: type of tag
* @group: group value for the work queue entry.
*/
static inline void cvmx_pow_tag_sw_full(cvmx_wqe_t *wqp, uint32_t tag,
enum cvmx_pow_tag_type tag_type,
uint64_t group)
{
if (CVMX_ENABLE_POW_CHECKS)
__cvmx_pow_warn_if_pending_switch(__func__);
/*
* Ensure that there is not a pending tag switch, as a tag
* switch cannot be started if a previous switch is still
* pending.
*/
cvmx_pow_tag_sw_wait();
cvmx_pow_tag_sw_full_nocheck(wqp, tag, tag_type, group);
}
/**
* Switch to a NULL tag, which ends any ordering or
* synchronization provided by the POW for the current
* work queue entry. This operation completes immediatly,
* so completetion should not be waited for.
* This function does NOT wait for previous tag switches to complete,
* so the caller must ensure that any previous tag switches have completed.
*/
static inline void cvmx_pow_tag_sw_null_nocheck(void)
{
cvmx_addr_t ptr;
cvmx_pow_tag_req_t tag_req;
if (CVMX_ENABLE_POW_CHECKS) {
cvmx_pow_tag_req_t current_tag;
__cvmx_pow_warn_if_pending_switch(__func__);
current_tag = cvmx_pow_get_current_tag();
if (current_tag.s.type == CVMX_POW_TAG_TYPE_NULL_NULL)
pr_warning("%s called with NULL_NULL tag\n",
__func__);
if (current_tag.s.type == CVMX_POW_TAG_TYPE_NULL)
pr_warning("%s called when we already have a "
"NULL tag\n",
__func__);
}
tag_req.u64 = 0;
tag_req.s.op = CVMX_POW_TAG_OP_SWTAG;
tag_req.s.type = CVMX_POW_TAG_TYPE_NULL;
ptr.u64 = 0;
ptr.sio.mem_region = CVMX_IO_SEG;
ptr.sio.is_io = 1;
ptr.sio.did = CVMX_OCT_DID_TAG_TAG1;
cvmx_write_io(ptr.u64, tag_req.u64);
/* switch to NULL completes immediately */
}
/**
* Switch to a NULL tag, which ends any ordering or
* synchronization provided by the POW for the current
* work queue entry. This operation completes immediatly,
* so completetion should not be waited for.
* This function waits for any pending tag switches to complete
* before requesting the switch to NULL.
*/
static inline void cvmx_pow_tag_sw_null(void)
{
if (CVMX_ENABLE_POW_CHECKS)
__cvmx_pow_warn_if_pending_switch(__func__);
/*
* Ensure that there is not a pending tag switch, as a tag
* switch cannot be started if a previous switch is still
* pending.
*/
cvmx_pow_tag_sw_wait();
cvmx_pow_tag_sw_null_nocheck();
/* switch to NULL completes immediately */
}
/**
* Submits work to an input queue. This function updates the work
* queue entry in DRAM to match the arguments given. Note that the
* tag provided is for the work queue entry submitted, and is
* unrelated to the tag that the core currently holds.
*
* @wqp: pointer to work queue entry to submit. This entry is
* updated to match the other parameters
* @tag: tag value to be assigned to work queue entry
* @tag_type: type of tag
* @qos: Input queue to add to.
* @grp: group value for the work queue entry.
*/
static inline void cvmx_pow_work_submit(cvmx_wqe_t *wqp, uint32_t tag,
enum cvmx_pow_tag_type tag_type,
uint64_t qos, uint64_t grp)
{
cvmx_addr_t ptr;
cvmx_pow_tag_req_t tag_req;
wqp->qos = qos;
wqp->tag = tag;
wqp->tag_type = tag_type;
wqp->grp = grp;
tag_req.u64 = 0;
tag_req.s.op = CVMX_POW_TAG_OP_ADDWQ;
tag_req.s.type = tag_type;
tag_req.s.tag = tag;
tag_req.s.qos = qos;
tag_req.s.grp = grp;
ptr.u64 = 0;
ptr.sio.mem_region = CVMX_IO_SEG;
ptr.sio.is_io = 1;
ptr.sio.did = CVMX_OCT_DID_TAG_TAG1;
ptr.sio.offset = cvmx_ptr_to_phys(wqp);
/*
* SYNC write to memory before the work submit. This is
* necessary as POW may read values from DRAM at this time.
*/
CVMX_SYNCWS;
cvmx_write_io(ptr.u64, tag_req.u64);
}
/**
* This function sets the group mask for a core. The group mask
* indicates which groups each core will accept work from. There are
* 16 groups.
*
* @core_num: core to apply mask to
* @mask: Group mask. There are 16 groups, so only bits 0-15 are valid,
* representing groups 0-15.
* Each 1 bit in the mask enables the core to accept work from
* the corresponding group.
*/
static inline void cvmx_pow_set_group_mask(uint64_t core_num, uint64_t mask)
{
union cvmx_pow_pp_grp_mskx grp_msk;
grp_msk.u64 = cvmx_read_csr(CVMX_POW_PP_GRP_MSKX(core_num));
grp_msk.s.grp_msk = mask;
cvmx_write_csr(CVMX_POW_PP_GRP_MSKX(core_num), grp_msk.u64);
}
/**
* This function sets POW static priorities for a core. Each input queue has
* an associated priority value.
*
* @core_num: core to apply priorities to
* @priority: Vector of 8 priorities, one per POW Input Queue (0-7).
* Highest priority is 0 and lowest is 7. A priority value
* of 0xF instructs POW to skip the Input Queue when
* scheduling to this specific core.
* NOTE: priorities should not have gaps in values, meaning
* {0,1,1,1,1,1,1,1} is a valid configuration while
* {0,2,2,2,2,2,2,2} is not.
*/
static inline void cvmx_pow_set_priority(uint64_t core_num,
const uint8_t priority[])
{
/* POW priorities are supported on CN5xxx and later */
if (!OCTEON_IS_MODEL(OCTEON_CN3XXX)) {
union cvmx_pow_pp_grp_mskx grp_msk;
grp_msk.u64 = cvmx_read_csr(CVMX_POW_PP_GRP_MSKX(core_num));
grp_msk.s.qos0_pri = priority[0];
grp_msk.s.qos1_pri = priority[1];
grp_msk.s.qos2_pri = priority[2];
grp_msk.s.qos3_pri = priority[3];
grp_msk.s.qos4_pri = priority[4];
grp_msk.s.qos5_pri = priority[5];
grp_msk.s.qos6_pri = priority[6];
grp_msk.s.qos7_pri = priority[7];
/* Detect gaps between priorities and flag error */
{
int i;
uint32_t prio_mask = 0;
for (i = 0; i < 8; i++)
if (priority[i] != 0xF)
prio_mask |= 1 << priority[i];
if (prio_mask ^ ((1 << cvmx_pop(prio_mask)) - 1)) {
pr_err("POW static priorities should be "
"contiguous (0x%llx)\n",
(unsigned long long)prio_mask);
return;
}
}
cvmx_write_csr(CVMX_POW_PP_GRP_MSKX(core_num), grp_msk.u64);
}
}
/**
* Performs a tag switch and then an immediate deschedule. This completes
* immediatly, so completion must not be waited for. This function does NOT
* update the wqe in DRAM to match arguments.
*
* This function does NOT wait for any prior tag switches to complete, so the
* calling code must do this.
*
* Note the following CAVEAT of the Octeon HW behavior when
* re-scheduling DE-SCHEDULEd items whose (next) state is
* ORDERED:
* - If there are no switches pending at the time that the
* HW executes the de-schedule, the HW will only re-schedule
* the head of the FIFO associated with the given tag. This
* means that in many respects, the HW treats this ORDERED
* tag as an ATOMIC tag. Note that in the SWTAG_DESCH
* case (to an ORDERED tag), the HW will do the switch
* before the deschedule whenever it is possible to do
* the switch immediately, so it may often look like
* this case.
* - If there is a pending switch to ORDERED at the time
* the HW executes the de-schedule, the HW will perform
* the switch at the time it re-schedules, and will be
* able to reschedule any/all of the entries with the
* same tag.
* Due to this behavior, the RECOMMENDATION to software is
* that they have a (next) state of ATOMIC when they
* DE-SCHEDULE. If an ORDERED tag is what was really desired,
* SW can choose to immediately switch to an ORDERED tag
* after the work (that has an ATOMIC tag) is re-scheduled.
* Note that since there are never any tag switches pending
* when the HW re-schedules, this switch can be IMMEDIATE upon
* the reception of the pointer during the re-schedule.
*
* @tag: New tag value
* @tag_type: New tag type
* @group: New group value
* @no_sched: Control whether this work queue entry will be rescheduled.
* - 1 : don't schedule this work
* - 0 : allow this work to be scheduled.
*/
static inline void cvmx_pow_tag_sw_desched_nocheck(
uint32_t tag,
enum cvmx_pow_tag_type tag_type,
uint64_t group,
uint64_t no_sched)
{
cvmx_addr_t ptr;
cvmx_pow_tag_req_t tag_req;
if (CVMX_ENABLE_POW_CHECKS) {
cvmx_pow_tag_req_t current_tag;
__cvmx_pow_warn_if_pending_switch(__func__);
current_tag = cvmx_pow_get_current_tag();
if (current_tag.s.type == CVMX_POW_TAG_TYPE_NULL_NULL)
pr_warning("%s called with NULL_NULL tag\n",
__func__);
if (current_tag.s.type == CVMX_POW_TAG_TYPE_NULL)
pr_warning("%s called with NULL tag. Deschedule not "
"allowed from NULL state\n",
__func__);
if ((current_tag.s.type != CVMX_POW_TAG_TYPE_ATOMIC)
&& (tag_type != CVMX_POW_TAG_TYPE_ATOMIC))
pr_warning("%s called where neither the before or "
"after tag is ATOMIC\n",
__func__);
}
tag_req.u64 = 0;
tag_req.s.op = CVMX_POW_TAG_OP_SWTAG_DESCH;
tag_req.s.tag = tag;
tag_req.s.type = tag_type;
tag_req.s.grp = group;
tag_req.s.no_sched = no_sched;
ptr.u64 = 0;
ptr.sio.mem_region = CVMX_IO_SEG;
ptr.sio.is_io = 1;
ptr.sio.did = CVMX_OCT_DID_TAG_TAG3;
/*
* since TAG3 is used, this store will clear the local pending
* switch bit.
*/
cvmx_write_io(ptr.u64, tag_req.u64);
}
/**
* Performs a tag switch and then an immediate deschedule. This completes
* immediatly, so completion must not be waited for. This function does NOT
* update the wqe in DRAM to match arguments.
*
* This function waits for any prior tag switches to complete, so the
* calling code may call this function with a pending tag switch.
*
* Note the following CAVEAT of the Octeon HW behavior when
* re-scheduling DE-SCHEDULEd items whose (next) state is
* ORDERED:
* - If there are no switches pending at the time that the
* HW executes the de-schedule, the HW will only re-schedule
* the head of the FIFO associated with the given tag. This
* means that in many respects, the HW treats this ORDERED
* tag as an ATOMIC tag. Note that in the SWTAG_DESCH
* case (to an ORDERED tag), the HW will do the switch
* before the deschedule whenever it is possible to do
* the switch immediately, so it may often look like
* this case.
* - If there is a pending switch to ORDERED at the time
* the HW executes the de-schedule, the HW will perform
* the switch at the time it re-schedules, and will be
* able to reschedule any/all of the entries with the
* same tag.
* Due to this behavior, the RECOMMENDATION to software is
* that they have a (next) state of ATOMIC when they
* DE-SCHEDULE. If an ORDERED tag is what was really desired,
* SW can choose to immediately switch to an ORDERED tag
* after the work (that has an ATOMIC tag) is re-scheduled.
* Note that since there are never any tag switches pending
* when the HW re-schedules, this switch can be IMMEDIATE upon
* the reception of the pointer during the re-schedule.
*
* @tag: New tag value
* @tag_type: New tag type
* @group: New group value
* @no_sched: Control whether this work queue entry will be rescheduled.
* - 1 : don't schedule this work
* - 0 : allow this work to be scheduled.
*/
static inline void cvmx_pow_tag_sw_desched(uint32_t tag,
enum cvmx_pow_tag_type tag_type,
uint64_t group, uint64_t no_sched)
{
if (CVMX_ENABLE_POW_CHECKS)
__cvmx_pow_warn_if_pending_switch(__func__);
/* Need to make sure any writes to the work queue entry are complete */
CVMX_SYNCWS;
/*
* Ensure that there is not a pending tag switch, as a tag
* switch cannot be started if a previous switch is still
* pending.
*/
cvmx_pow_tag_sw_wait();
cvmx_pow_tag_sw_desched_nocheck(tag, tag_type, group, no_sched);
}
/**
* Descchedules the current work queue entry.
*
* @no_sched: no schedule flag value to be set on the work queue
* entry. If this is set the entry will not be
* rescheduled.
*/
static inline void cvmx_pow_desched(uint64_t no_sched)
{
cvmx_addr_t ptr;
cvmx_pow_tag_req_t tag_req;
if (CVMX_ENABLE_POW_CHECKS) {
cvmx_pow_tag_req_t current_tag;
__cvmx_pow_warn_if_pending_switch(__func__);
current_tag = cvmx_pow_get_current_tag();
if (current_tag.s.type == CVMX_POW_TAG_TYPE_NULL_NULL)
pr_warning("%s called with NULL_NULL tag\n",
__func__);
if (current_tag.s.type == CVMX_POW_TAG_TYPE_NULL)
pr_warning("%s called with NULL tag. Deschedule not "
"expected from NULL state\n",
__func__);
}
/* Need to make sure any writes to the work queue entry are complete */
CVMX_SYNCWS;
tag_req.u64 = 0;
tag_req.s.op = CVMX_POW_TAG_OP_DESCH;
tag_req.s.no_sched = no_sched;
ptr.u64 = 0;
ptr.sio.mem_region = CVMX_IO_SEG;
ptr.sio.is_io = 1;
ptr.sio.did = CVMX_OCT_DID_TAG_TAG3;
/*
* since TAG3 is used, this store will clear the local pending
* switch bit.
*/
cvmx_write_io(ptr.u64, tag_req.u64);
}
/****************************************************
* Define usage of bits within the 32 bit tag values.
*****************************************************/
/*
* Number of bits of the tag used by software. The SW bits are always
* a contiguous block of the high starting at bit 31. The hardware
* bits are always the low bits. By default, the top 8 bits of the
* tag are reserved for software, and the low 24 are set by the IPD
* unit.
*/
#define CVMX_TAG_SW_BITS (8)
#define CVMX_TAG_SW_SHIFT (32 - CVMX_TAG_SW_BITS)
/* Below is the list of values for the top 8 bits of the tag. */
/*
* Tag values with top byte of this value are reserved for internal
* executive uses.
*/
#define CVMX_TAG_SW_BITS_INTERNAL 0x1
/* The executive divides the remaining 24 bits as follows:
* - the upper 8 bits (bits 23 - 16 of the tag) define a subgroup
*
* - the lower 16 bits (bits 15 - 0 of the tag) define are the value
* with the subgroup
*
* Note that this section describes the format of tags generated by
* software - refer to the hardware documentation for a description of
* the tags values generated by the packet input hardware. Subgroups
* are defined here.
*/
/* Mask for the value portion of the tag */
#define CVMX_TAG_SUBGROUP_MASK 0xFFFF
#define CVMX_TAG_SUBGROUP_SHIFT 16
#define CVMX_TAG_SUBGROUP_PKO 0x1
/* End of executive tag subgroup definitions */
/*
* The remaining values software bit values 0x2 - 0xff are available
* for application use.
*/
/**
* This function creates a 32 bit tag value from the two values provided.
*
* @sw_bits: The upper bits (number depends on configuration) are set
* to this value. The remainder of bits are set by the
* hw_bits parameter.
*
* @hw_bits: The lower bits (number depends on configuration) are set
* to this value. The remainder of bits are set by the
* sw_bits parameter.
*
* Returns 32 bit value of the combined hw and sw bits.
*/
static inline uint32_t cvmx_pow_tag_compose(uint64_t sw_bits, uint64_t hw_bits)
{
return ((sw_bits & cvmx_build_mask(CVMX_TAG_SW_BITS)) <<
CVMX_TAG_SW_SHIFT) |
(hw_bits & cvmx_build_mask(32 - CVMX_TAG_SW_BITS));
}
/**
* Extracts the bits allocated for software use from the tag
*
* @tag: 32 bit tag value
*
* Returns N bit software tag value, where N is configurable with the
* CVMX_TAG_SW_BITS define
*/
static inline uint32_t cvmx_pow_tag_get_sw_bits(uint64_t tag)
{
return (tag >> (32 - CVMX_TAG_SW_BITS)) &
cvmx_build_mask(CVMX_TAG_SW_BITS);
}
/**
*
* Extracts the bits allocated for hardware use from the tag
*
* @tag: 32 bit tag value
*
* Returns (32 - N) bit software tag value, where N is configurable
* with the CVMX_TAG_SW_BITS define
*/
static inline uint32_t cvmx_pow_tag_get_hw_bits(uint64_t tag)
{
return tag & cvmx_build_mask(32 - CVMX_TAG_SW_BITS);
}
/**
* Store the current POW internal state into the supplied
* buffer. It is recommended that you pass a buffer of at least
* 128KB. The format of the capture may change based on SDK
* version and Octeon chip.
*
* @buffer: Buffer to store capture into
* @buffer_size:
* The size of the supplied buffer
*
* Returns Zero on sucess, negative on failure
*/
extern int cvmx_pow_capture(void *buffer, int buffer_size);
/**
* Dump a POW capture to the console in a human readable format.
*
* @buffer: POW capture from cvmx_pow_capture()
* @buffer_size:
* Size of the buffer
*/
extern void cvmx_pow_display(void *buffer, int buffer_size);
/**
* Return the number of POW entries supported by this chip
*
* Returns Number of POW entries
*/
extern int cvmx_pow_get_num_entries(void);
#endif /* __CVMX_POW_H__ */