| /* |
| * IDT Interprise 79RC32434 watchdog driver |
| * |
| * Copyright (C) 2006, Ondrej Zajicek <santiago@crfreenet.org> |
| * Copyright (C) 2008, Florian Fainelli <florian@openwrt.org> |
| * |
| * based on |
| * SoftDog 0.05: A Software Watchdog Device |
| * |
| * (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>, |
| * All Rights Reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| * |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/module.h> /* For module specific items */ |
| #include <linux/moduleparam.h> /* For new moduleparam's */ |
| #include <linux/types.h> /* For standard types (like size_t) */ |
| #include <linux/errno.h> /* For the -ENODEV/... values */ |
| #include <linux/kernel.h> /* For printk/panic/... */ |
| #include <linux/fs.h> /* For file operations */ |
| #include <linux/miscdevice.h> /* For struct miscdevice */ |
| #include <linux/watchdog.h> /* For the watchdog specific items */ |
| #include <linux/init.h> /* For __init/__exit/... */ |
| #include <linux/platform_device.h> /* For platform_driver framework */ |
| #include <linux/spinlock.h> /* For spin_lock/spin_unlock/... */ |
| #include <linux/uaccess.h> /* For copy_to_user/put_user/... */ |
| #include <linux/io.h> /* For devm_ioremap_nocache */ |
| |
| #include <asm/mach-rc32434/integ.h> /* For the Watchdog registers */ |
| |
| #define VERSION "1.0" |
| |
| static struct { |
| unsigned long inuse; |
| spinlock_t io_lock; |
| } rc32434_wdt_device; |
| |
| static struct integ __iomem *wdt_reg; |
| |
| static int expect_close; |
| |
| /* Board internal clock speed in Hz, |
| * the watchdog timer ticks at. */ |
| extern unsigned int idt_cpu_freq; |
| |
| /* translate wtcompare value to seconds and vice versa */ |
| #define WTCOMP2SEC(x) (x / idt_cpu_freq) |
| #define SEC2WTCOMP(x) (x * idt_cpu_freq) |
| |
| /* Use a default timeout of 20s. This should be |
| * safe for CPU clock speeds up to 400MHz, as |
| * ((2 ^ 32) - 1) / (400MHz / 2) = 21s. */ |
| #define WATCHDOG_TIMEOUT 20 |
| |
| static int timeout = WATCHDOG_TIMEOUT; |
| module_param(timeout, int, 0); |
| MODULE_PARM_DESC(timeout, "Watchdog timeout value, in seconds (default=" |
| __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); |
| |
| static bool nowayout = WATCHDOG_NOWAYOUT; |
| module_param(nowayout, bool, 0); |
| MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" |
| __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); |
| |
| /* apply or and nand masks to data read from addr and write back */ |
| #define SET_BITS(addr, or, nand) \ |
| writel((readl(&addr) | or) & ~nand, &addr) |
| |
| static int rc32434_wdt_set(int new_timeout) |
| { |
| int max_to = WTCOMP2SEC((u32)-1); |
| |
| if (new_timeout < 0 || new_timeout > max_to) { |
| pr_err("timeout value must be between 0 and %d\n", max_to); |
| return -EINVAL; |
| } |
| timeout = new_timeout; |
| spin_lock(&rc32434_wdt_device.io_lock); |
| writel(SEC2WTCOMP(timeout), &wdt_reg->wtcompare); |
| spin_unlock(&rc32434_wdt_device.io_lock); |
| |
| return 0; |
| } |
| |
| static void rc32434_wdt_start(void) |
| { |
| u32 or, nand; |
| |
| spin_lock(&rc32434_wdt_device.io_lock); |
| |
| /* zero the counter before enabling */ |
| writel(0, &wdt_reg->wtcount); |
| |
| /* don't generate a non-maskable interrupt, |
| * do a warm reset instead */ |
| nand = 1 << RC32434_ERR_WNE; |
| or = 1 << RC32434_ERR_WRE; |
| |
| /* reset the ERRCS timeout bit in case it's set */ |
| nand |= 1 << RC32434_ERR_WTO; |
| |
| SET_BITS(wdt_reg->errcs, or, nand); |
| |
| /* set the timeout (either default or based on module param) */ |
| rc32434_wdt_set(timeout); |
| |
| /* reset WTC timeout bit and enable WDT */ |
| nand = 1 << RC32434_WTC_TO; |
| or = 1 << RC32434_WTC_EN; |
| |
| SET_BITS(wdt_reg->wtc, or, nand); |
| |
| spin_unlock(&rc32434_wdt_device.io_lock); |
| pr_info("Started watchdog timer\n"); |
| } |
| |
| static void rc32434_wdt_stop(void) |
| { |
| spin_lock(&rc32434_wdt_device.io_lock); |
| |
| /* Disable WDT */ |
| SET_BITS(wdt_reg->wtc, 0, 1 << RC32434_WTC_EN); |
| |
| spin_unlock(&rc32434_wdt_device.io_lock); |
| pr_info("Stopped watchdog timer\n"); |
| } |
| |
| static void rc32434_wdt_ping(void) |
| { |
| spin_lock(&rc32434_wdt_device.io_lock); |
| writel(0, &wdt_reg->wtcount); |
| spin_unlock(&rc32434_wdt_device.io_lock); |
| } |
| |
| static int rc32434_wdt_open(struct inode *inode, struct file *file) |
| { |
| if (test_and_set_bit(0, &rc32434_wdt_device.inuse)) |
| return -EBUSY; |
| |
| if (nowayout) |
| __module_get(THIS_MODULE); |
| |
| rc32434_wdt_start(); |
| rc32434_wdt_ping(); |
| |
| return stream_open(inode, file); |
| } |
| |
| static int rc32434_wdt_release(struct inode *inode, struct file *file) |
| { |
| if (expect_close == 42) { |
| rc32434_wdt_stop(); |
| module_put(THIS_MODULE); |
| } else { |
| pr_crit("device closed unexpectedly. WDT will not stop!\n"); |
| rc32434_wdt_ping(); |
| } |
| clear_bit(0, &rc32434_wdt_device.inuse); |
| return 0; |
| } |
| |
| static ssize_t rc32434_wdt_write(struct file *file, const char *data, |
| size_t len, loff_t *ppos) |
| { |
| if (len) { |
| if (!nowayout) { |
| size_t i; |
| |
| /* In case it was set long ago */ |
| expect_close = 0; |
| |
| for (i = 0; i != len; i++) { |
| char c; |
| if (get_user(c, data + i)) |
| return -EFAULT; |
| if (c == 'V') |
| expect_close = 42; |
| } |
| } |
| rc32434_wdt_ping(); |
| return len; |
| } |
| return 0; |
| } |
| |
| static long rc32434_wdt_ioctl(struct file *file, unsigned int cmd, |
| unsigned long arg) |
| { |
| void __user *argp = (void __user *)arg; |
| int new_timeout; |
| unsigned int value; |
| static const struct watchdog_info ident = { |
| .options = WDIOF_SETTIMEOUT | |
| WDIOF_KEEPALIVEPING | |
| WDIOF_MAGICCLOSE, |
| .identity = "RC32434_WDT Watchdog", |
| }; |
| switch (cmd) { |
| case WDIOC_GETSUPPORT: |
| if (copy_to_user(argp, &ident, sizeof(ident))) |
| return -EFAULT; |
| break; |
| case WDIOC_GETSTATUS: |
| case WDIOC_GETBOOTSTATUS: |
| value = 0; |
| if (copy_to_user(argp, &value, sizeof(int))) |
| return -EFAULT; |
| break; |
| case WDIOC_SETOPTIONS: |
| if (copy_from_user(&value, argp, sizeof(int))) |
| return -EFAULT; |
| switch (value) { |
| case WDIOS_ENABLECARD: |
| rc32434_wdt_start(); |
| break; |
| case WDIOS_DISABLECARD: |
| rc32434_wdt_stop(); |
| break; |
| default: |
| return -EINVAL; |
| } |
| break; |
| case WDIOC_KEEPALIVE: |
| rc32434_wdt_ping(); |
| break; |
| case WDIOC_SETTIMEOUT: |
| if (copy_from_user(&new_timeout, argp, sizeof(int))) |
| return -EFAULT; |
| if (rc32434_wdt_set(new_timeout)) |
| return -EINVAL; |
| /* Fall through */ |
| case WDIOC_GETTIMEOUT: |
| return copy_to_user(argp, &timeout, sizeof(int)) ? -EFAULT : 0; |
| default: |
| return -ENOTTY; |
| } |
| |
| return 0; |
| } |
| |
| static const struct file_operations rc32434_wdt_fops = { |
| .owner = THIS_MODULE, |
| .llseek = no_llseek, |
| .write = rc32434_wdt_write, |
| .unlocked_ioctl = rc32434_wdt_ioctl, |
| .open = rc32434_wdt_open, |
| .release = rc32434_wdt_release, |
| }; |
| |
| static struct miscdevice rc32434_wdt_miscdev = { |
| .minor = WATCHDOG_MINOR, |
| .name = "watchdog", |
| .fops = &rc32434_wdt_fops, |
| }; |
| |
| static int rc32434_wdt_probe(struct platform_device *pdev) |
| { |
| int ret; |
| struct resource *r; |
| |
| r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rb532_wdt_res"); |
| if (!r) { |
| pr_err("failed to retrieve resources\n"); |
| return -ENODEV; |
| } |
| |
| wdt_reg = devm_ioremap_nocache(&pdev->dev, r->start, resource_size(r)); |
| if (!wdt_reg) { |
| pr_err("failed to remap I/O resources\n"); |
| return -ENXIO; |
| } |
| |
| spin_lock_init(&rc32434_wdt_device.io_lock); |
| |
| /* Make sure the watchdog is not running */ |
| rc32434_wdt_stop(); |
| |
| /* Check that the heartbeat value is within it's range; |
| * if not reset to the default */ |
| if (rc32434_wdt_set(timeout)) { |
| rc32434_wdt_set(WATCHDOG_TIMEOUT); |
| pr_info("timeout value must be between 0 and %d\n", |
| WTCOMP2SEC((u32)-1)); |
| } |
| |
| ret = misc_register(&rc32434_wdt_miscdev); |
| if (ret < 0) { |
| pr_err("failed to register watchdog device\n"); |
| return ret; |
| } |
| |
| pr_info("Watchdog Timer version " VERSION ", timer margin: %d sec\n", |
| timeout); |
| |
| return 0; |
| } |
| |
| static int rc32434_wdt_remove(struct platform_device *pdev) |
| { |
| misc_deregister(&rc32434_wdt_miscdev); |
| return 0; |
| } |
| |
| static void rc32434_wdt_shutdown(struct platform_device *pdev) |
| { |
| rc32434_wdt_stop(); |
| } |
| |
| static struct platform_driver rc32434_wdt_driver = { |
| .probe = rc32434_wdt_probe, |
| .remove = rc32434_wdt_remove, |
| .shutdown = rc32434_wdt_shutdown, |
| .driver = { |
| .name = "rc32434_wdt", |
| } |
| }; |
| |
| module_platform_driver(rc32434_wdt_driver); |
| |
| MODULE_AUTHOR("Ondrej Zajicek <santiago@crfreenet.org>," |
| "Florian Fainelli <florian@openwrt.org>"); |
| MODULE_DESCRIPTION("Driver for the IDT RC32434 SoC watchdog"); |
| MODULE_LICENSE("GPL"); |