| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright 2015 Freescale Semiconductor, Inc. |
| * |
| * Freescale DCU drm device driver |
| */ |
| |
| #include <linux/backlight.h> |
| #include <linux/of_graph.h> |
| |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_bridge.h> |
| #include <drm/drm_of.h> |
| #include <drm/drm_panel.h> |
| #include <drm/drm_probe_helper.h> |
| |
| #include "fsl_dcu_drm_drv.h" |
| #include "fsl_tcon.h" |
| |
| static void fsl_dcu_drm_encoder_destroy(struct drm_encoder *encoder) |
| { |
| drm_encoder_cleanup(encoder); |
| } |
| |
| static const struct drm_encoder_funcs encoder_funcs = { |
| .destroy = fsl_dcu_drm_encoder_destroy, |
| }; |
| |
| int fsl_dcu_drm_encoder_create(struct fsl_dcu_drm_device *fsl_dev, |
| struct drm_crtc *crtc) |
| { |
| struct drm_encoder *encoder = &fsl_dev->encoder; |
| int ret; |
| |
| encoder->possible_crtcs = 1; |
| |
| /* Use bypass mode for parallel RGB/LVDS encoder */ |
| if (fsl_dev->tcon) |
| fsl_tcon_bypass_enable(fsl_dev->tcon); |
| |
| ret = drm_encoder_init(fsl_dev->drm, encoder, &encoder_funcs, |
| DRM_MODE_ENCODER_LVDS, NULL); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static void fsl_dcu_drm_connector_destroy(struct drm_connector *connector) |
| { |
| struct fsl_dcu_drm_connector *fsl_con = to_fsl_dcu_connector(connector); |
| |
| drm_connector_unregister(connector); |
| drm_panel_detach(fsl_con->panel); |
| drm_connector_cleanup(connector); |
| } |
| |
| static const struct drm_connector_funcs fsl_dcu_drm_connector_funcs = { |
| .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, |
| .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, |
| .destroy = fsl_dcu_drm_connector_destroy, |
| .fill_modes = drm_helper_probe_single_connector_modes, |
| .reset = drm_atomic_helper_connector_reset, |
| }; |
| |
| static int fsl_dcu_drm_connector_get_modes(struct drm_connector *connector) |
| { |
| struct fsl_dcu_drm_connector *fsl_connector; |
| |
| fsl_connector = to_fsl_dcu_connector(connector); |
| return drm_panel_get_modes(fsl_connector->panel, connector); |
| } |
| |
| static int fsl_dcu_drm_connector_mode_valid(struct drm_connector *connector, |
| struct drm_display_mode *mode) |
| { |
| if (mode->hdisplay & 0xf) |
| return MODE_ERROR; |
| |
| return MODE_OK; |
| } |
| |
| static const struct drm_connector_helper_funcs connector_helper_funcs = { |
| .get_modes = fsl_dcu_drm_connector_get_modes, |
| .mode_valid = fsl_dcu_drm_connector_mode_valid, |
| }; |
| |
| static int fsl_dcu_attach_panel(struct fsl_dcu_drm_device *fsl_dev, |
| struct drm_panel *panel) |
| { |
| struct drm_encoder *encoder = &fsl_dev->encoder; |
| struct drm_connector *connector = &fsl_dev->connector.base; |
| int ret; |
| |
| fsl_dev->connector.encoder = encoder; |
| |
| ret = drm_connector_init(fsl_dev->drm, connector, |
| &fsl_dcu_drm_connector_funcs, |
| DRM_MODE_CONNECTOR_LVDS); |
| if (ret < 0) |
| return ret; |
| |
| drm_connector_helper_add(connector, &connector_helper_funcs); |
| ret = drm_connector_register(connector); |
| if (ret < 0) |
| goto err_cleanup; |
| |
| ret = drm_connector_attach_encoder(connector, encoder); |
| if (ret < 0) |
| goto err_sysfs; |
| |
| ret = drm_panel_attach(panel, connector); |
| if (ret) { |
| dev_err(fsl_dev->dev, "failed to attach panel\n"); |
| goto err_sysfs; |
| } |
| |
| return 0; |
| |
| err_sysfs: |
| drm_connector_unregister(connector); |
| err_cleanup: |
| drm_connector_cleanup(connector); |
| return ret; |
| } |
| |
| int fsl_dcu_create_outputs(struct fsl_dcu_drm_device *fsl_dev) |
| { |
| struct device_node *panel_node; |
| struct drm_panel *panel; |
| struct drm_bridge *bridge; |
| int ret; |
| |
| /* This is for backward compatibility */ |
| panel_node = of_parse_phandle(fsl_dev->np, "fsl,panel", 0); |
| if (panel_node) { |
| fsl_dev->connector.panel = of_drm_find_panel(panel_node); |
| of_node_put(panel_node); |
| if (IS_ERR(fsl_dev->connector.panel)) |
| return PTR_ERR(fsl_dev->connector.panel); |
| |
| return fsl_dcu_attach_panel(fsl_dev, fsl_dev->connector.panel); |
| } |
| |
| ret = drm_of_find_panel_or_bridge(fsl_dev->np, 0, 0, &panel, &bridge); |
| if (ret) |
| return ret; |
| |
| if (panel) { |
| fsl_dev->connector.panel = panel; |
| return fsl_dcu_attach_panel(fsl_dev, panel); |
| } |
| |
| return drm_bridge_attach(&fsl_dev->encoder, bridge, NULL); |
| } |