| // SPDX-License-Identifier: GPL-2.0 |
| // |
| // DVB device driver for em28xx |
| // |
| // (c) 2008-2011 Mauro Carvalho Chehab <mchehab@infradead.org> |
| // |
| // (c) 2008 Devin Heitmueller <devin.heitmueller@gmail.com> |
| // - Fixes for the driver to properly work with HVR-950 |
| // - Fixes for the driver to properly work with Pinnacle PCTV HD Pro Stick |
| // - Fixes for the driver to properly work with AMD ATI TV Wonder HD 600 |
| // |
| // (c) 2008 Aidan Thornton <makosoft@googlemail.com> |
| // |
| // (c) 2012 Frank Schäfer <fschaefer.oss@googlemail.com> |
| // |
| // Based on cx88-dvb, saa7134-dvb and videobuf-dvb originally written by: |
| // (c) 2004, 2005 Chris Pascoe <c.pascoe@itee.uq.edu.au> |
| // (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs] |
| // |
| // This program is free software; you can redistribute it and/or modify |
| // it under the terms of the GNU General Public License as published by |
| // the Free Software Foundation version 2 of the License. |
| |
| #include "em28xx.h" |
| |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/usb.h> |
| |
| #include <media/v4l2-common.h> |
| #include <media/dvb_demux.h> |
| #include <media/dvb_net.h> |
| #include <media/dmxdev.h> |
| #include <media/tuner.h> |
| #include "tuner-simple.h" |
| #include <linux/gpio.h> |
| |
| #include "lgdt330x.h" |
| #include "lgdt3305.h" |
| #include "lgdt3306a.h" |
| #include "zl10353.h" |
| #include "s5h1409.h" |
| #include "mt2060.h" |
| #include "mt352.h" |
| #include "mt352_priv.h" /* FIXME */ |
| #include "tda1002x.h" |
| #include "drx39xyj/drx39xxj.h" |
| #include "tda18271.h" |
| #include "s921.h" |
| #include "drxd.h" |
| #include "cxd2820r.h" |
| #include "tda18271c2dd.h" |
| #include "drxk.h" |
| #include "tda10071.h" |
| #include "tda18212.h" |
| #include "a8293.h" |
| #include "qt1010.h" |
| #include "mb86a20s.h" |
| #include "m88ds3103.h" |
| #include "ts2020.h" |
| #include "si2168.h" |
| #include "si2157.h" |
| #include "tc90522.h" |
| #include "qm1d1c0042.h" |
| |
| MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION(DRIVER_DESC " - digital TV interface"); |
| MODULE_VERSION(EM28XX_VERSION); |
| |
| static unsigned int debug; |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "enable debug messages [dvb]"); |
| |
| DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); |
| |
| #define dprintk(level, fmt, arg...) do { \ |
| if (debug >= level) \ |
| dev_printk(KERN_DEBUG, &dev->intf->dev, \ |
| "dvb: " fmt, ## arg); \ |
| } while (0) |
| |
| struct em28xx_dvb { |
| struct dvb_frontend *fe[2]; |
| |
| /* feed count management */ |
| struct mutex lock; |
| int nfeeds; |
| |
| /* general boilerplate stuff */ |
| struct dvb_adapter adapter; |
| struct dvb_demux demux; |
| struct dmxdev dmxdev; |
| struct dmx_frontend fe_hw; |
| struct dmx_frontend fe_mem; |
| struct dvb_net net; |
| |
| /* Due to DRX-K - probably need changes */ |
| int (*gate_ctrl)(struct dvb_frontend *fe, int gate); |
| struct semaphore pll_mutex; |
| bool dont_attach_fe1; |
| int lna_gpio; |
| struct i2c_client *i2c_client_demod; |
| struct i2c_client *i2c_client_tuner; |
| struct i2c_client *i2c_client_sec; |
| }; |
| |
| static inline void print_err_status(struct em28xx *dev, |
| int packet, int status) |
| { |
| char *errmsg = "Unknown"; |
| |
| switch (status) { |
| case -ENOENT: |
| errmsg = "unlinked synchronously"; |
| break; |
| case -ECONNRESET: |
| errmsg = "unlinked asynchronously"; |
| break; |
| case -ENOSR: |
| errmsg = "Buffer error (overrun)"; |
| break; |
| case -EPIPE: |
| errmsg = "Stalled (device not responding)"; |
| break; |
| case -EOVERFLOW: |
| errmsg = "Babble (bad cable?)"; |
| break; |
| case -EPROTO: |
| errmsg = "Bit-stuff error (bad cable?)"; |
| break; |
| case -EILSEQ: |
| errmsg = "CRC/Timeout (could be anything)"; |
| break; |
| case -ETIME: |
| errmsg = "Device does not respond"; |
| break; |
| } |
| if (packet < 0) { |
| dprintk(1, "URB status %d [%s].\n", status, errmsg); |
| } else { |
| dprintk(1, "URB packet %d, status %d [%s].\n", |
| packet, status, errmsg); |
| } |
| } |
| |
| static inline int em28xx_dvb_urb_data_copy(struct em28xx *dev, struct urb *urb) |
| { |
| int xfer_bulk, num_packets, i; |
| |
| if (!dev) |
| return 0; |
| |
| if (dev->disconnected) |
| return 0; |
| |
| if (urb->status < 0) |
| print_err_status(dev, -1, urb->status); |
| |
| xfer_bulk = usb_pipebulk(urb->pipe); |
| |
| if (xfer_bulk) /* bulk */ |
| num_packets = 1; |
| else /* isoc */ |
| num_packets = urb->number_of_packets; |
| |
| for (i = 0; i < num_packets; i++) { |
| if (xfer_bulk) { |
| if (urb->status < 0) { |
| print_err_status(dev, i, urb->status); |
| if (urb->status != -EPROTO) |
| continue; |
| } |
| if (!urb->actual_length) |
| continue; |
| dvb_dmx_swfilter(&dev->dvb->demux, urb->transfer_buffer, |
| urb->actual_length); |
| } else { |
| if (urb->iso_frame_desc[i].status < 0) { |
| print_err_status(dev, i, |
| urb->iso_frame_desc[i].status); |
| if (urb->iso_frame_desc[i].status != -EPROTO) |
| continue; |
| } |
| if (!urb->iso_frame_desc[i].actual_length) |
| continue; |
| dvb_dmx_swfilter(&dev->dvb->demux, |
| urb->transfer_buffer + |
| urb->iso_frame_desc[i].offset, |
| urb->iso_frame_desc[i].actual_length); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int em28xx_start_streaming(struct em28xx_dvb *dvb) |
| { |
| int rc; |
| struct em28xx_i2c_bus *i2c_bus = dvb->adapter.priv; |
| struct em28xx *dev = i2c_bus->dev; |
| int dvb_max_packet_size, packet_multiplier, dvb_alt; |
| |
| if (dev->dvb_xfer_bulk) { |
| if (!dev->dvb_ep_bulk) |
| return -ENODEV; |
| dvb_max_packet_size = 512; /* USB 2.0 spec */ |
| packet_multiplier = EM28XX_DVB_BULK_PACKET_MULTIPLIER; |
| dvb_alt = 0; |
| } else { /* isoc */ |
| if (!dev->dvb_ep_isoc) |
| return -ENODEV; |
| dvb_max_packet_size = dev->dvb_max_pkt_size_isoc; |
| if (dvb_max_packet_size < 0) |
| return dvb_max_packet_size; |
| packet_multiplier = EM28XX_DVB_NUM_ISOC_PACKETS; |
| dvb_alt = dev->dvb_alt_isoc; |
| } |
| |
| rc = em28xx_set_mode(dev, EM28XX_DIGITAL_MODE); |
| if (rc < 0) |
| return rc; |
| |
| dprintk(1, "Using %d buffers each with %d x %d bytes, alternate %d\n", |
| EM28XX_DVB_NUM_BUFS, |
| packet_multiplier, |
| dvb_max_packet_size, dvb_alt); |
| |
| return em28xx_init_usb_xfer(dev, EM28XX_DIGITAL_MODE, |
| dev->dvb_xfer_bulk, |
| EM28XX_DVB_NUM_BUFS, |
| dvb_max_packet_size, |
| packet_multiplier, |
| em28xx_dvb_urb_data_copy); |
| } |
| |
| static int em28xx_stop_streaming(struct em28xx_dvb *dvb) |
| { |
| struct em28xx_i2c_bus *i2c_bus = dvb->adapter.priv; |
| struct em28xx *dev = i2c_bus->dev; |
| |
| em28xx_stop_urbs(dev); |
| |
| return 0; |
| } |
| |
| static int em28xx_start_feed(struct dvb_demux_feed *feed) |
| { |
| struct dvb_demux *demux = feed->demux; |
| struct em28xx_dvb *dvb = demux->priv; |
| int rc, ret; |
| |
| if (!demux->dmx.frontend) |
| return -EINVAL; |
| |
| mutex_lock(&dvb->lock); |
| dvb->nfeeds++; |
| rc = dvb->nfeeds; |
| |
| if (dvb->nfeeds == 1) { |
| ret = em28xx_start_streaming(dvb); |
| if (ret < 0) |
| rc = ret; |
| } |
| |
| mutex_unlock(&dvb->lock); |
| return rc; |
| } |
| |
| static int em28xx_stop_feed(struct dvb_demux_feed *feed) |
| { |
| struct dvb_demux *demux = feed->demux; |
| struct em28xx_dvb *dvb = demux->priv; |
| int err = 0; |
| |
| mutex_lock(&dvb->lock); |
| dvb->nfeeds--; |
| |
| if (!dvb->nfeeds) |
| err = em28xx_stop_streaming(dvb); |
| |
| mutex_unlock(&dvb->lock); |
| return err; |
| } |
| |
| /* ------------------------------------------------------------------ */ |
| static int em28xx_dvb_bus_ctrl(struct dvb_frontend *fe, int acquire) |
| { |
| struct em28xx_i2c_bus *i2c_bus = fe->dvb->priv; |
| struct em28xx *dev = i2c_bus->dev; |
| |
| if (acquire) |
| return em28xx_set_mode(dev, EM28XX_DIGITAL_MODE); |
| else |
| return em28xx_set_mode(dev, EM28XX_SUSPEND); |
| } |
| |
| /* ------------------------------------------------------------------ */ |
| |
| static struct lgdt330x_config em2880_lgdt3303_dev = { |
| .demod_address = 0x0e, |
| .demod_chip = LGDT3303, |
| }; |
| |
| static struct lgdt3305_config em2870_lgdt3304_dev = { |
| .i2c_addr = 0x0e, |
| .demod_chip = LGDT3304, |
| .spectral_inversion = 1, |
| .deny_i2c_rptr = 1, |
| .mpeg_mode = LGDT3305_MPEG_PARALLEL, |
| .tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE, |
| .tpvalid_polarity = LGDT3305_TP_VALID_HIGH, |
| .vsb_if_khz = 3250, |
| .qam_if_khz = 4000, |
| }; |
| |
| static struct lgdt3305_config em2874_lgdt3305_dev = { |
| .i2c_addr = 0x0e, |
| .demod_chip = LGDT3305, |
| .spectral_inversion = 1, |
| .deny_i2c_rptr = 0, |
| .mpeg_mode = LGDT3305_MPEG_SERIAL, |
| .tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE, |
| .tpvalid_polarity = LGDT3305_TP_VALID_HIGH, |
| .vsb_if_khz = 3250, |
| .qam_if_khz = 4000, |
| }; |
| |
| static struct lgdt3305_config em2874_lgdt3305_nogate_dev = { |
| .i2c_addr = 0x0e, |
| .demod_chip = LGDT3305, |
| .spectral_inversion = 1, |
| .deny_i2c_rptr = 1, |
| .mpeg_mode = LGDT3305_MPEG_SERIAL, |
| .tpclk_edge = LGDT3305_TPCLK_FALLING_EDGE, |
| .tpvalid_polarity = LGDT3305_TP_VALID_HIGH, |
| .vsb_if_khz = 3600, |
| .qam_if_khz = 3600, |
| }; |
| |
| static struct s921_config sharp_isdbt = { |
| .demod_address = 0x30 >> 1 |
| }; |
| |
| static struct zl10353_config em28xx_zl10353_with_xc3028 = { |
| .demod_address = (0x1e >> 1), |
| .no_tuner = 1, |
| .parallel_ts = 1, |
| .if2 = 45600, |
| }; |
| |
| static struct s5h1409_config em28xx_s5h1409_with_xc3028 = { |
| .demod_address = 0x32 >> 1, |
| .output_mode = S5H1409_PARALLEL_OUTPUT, |
| .gpio = S5H1409_GPIO_OFF, |
| .inversion = S5H1409_INVERSION_OFF, |
| .status_mode = S5H1409_DEMODLOCKING, |
| .mpeg_timing = S5H1409_MPEGTIMING_CONTINUOUS_NONINVERTING_CLOCK |
| }; |
| |
| static struct tda18271_std_map kworld_a340_std_map = { |
| .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 0, |
| .if_lvl = 1, .rfagc_top = 0x37, }, |
| .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 1, |
| .if_lvl = 1, .rfagc_top = 0x37, }, |
| }; |
| |
| static struct tda18271_config kworld_a340_config = { |
| .std_map = &kworld_a340_std_map, |
| }; |
| |
| static struct tda18271_config kworld_ub435q_v2_config = { |
| .std_map = &kworld_a340_std_map, |
| .gate = TDA18271_GATE_DIGITAL, |
| }; |
| |
| static struct tda18212_config kworld_ub435q_v3_config = { |
| .if_atsc_vsb = 3600, |
| .if_atsc_qam = 3600, |
| }; |
| |
| static struct zl10353_config em28xx_zl10353_xc3028_no_i2c_gate = { |
| .demod_address = (0x1e >> 1), |
| .no_tuner = 1, |
| .disable_i2c_gate_ctrl = 1, |
| .parallel_ts = 1, |
| .if2 = 45600, |
| }; |
| |
| static struct drxd_config em28xx_drxd = { |
| .demod_address = 0x70, |
| .demod_revision = 0xa2, |
| .pll_type = DRXD_PLL_NONE, |
| .clock = 12000, |
| .insert_rs_byte = 1, |
| .IF = 42800000, |
| .disable_i2c_gate_ctrl = 1, |
| }; |
| |
| static struct drxk_config terratec_h5_drxk = { |
| .adr = 0x29, |
| .single_master = 1, |
| .no_i2c_bridge = 1, |
| .microcode_name = "dvb-usb-terratec-h5-drxk.fw", |
| .qam_demod_parameter_count = 2, |
| }; |
| |
| static struct drxk_config hauppauge_930c_drxk = { |
| .adr = 0x29, |
| .single_master = 1, |
| .no_i2c_bridge = 1, |
| .microcode_name = "dvb-usb-hauppauge-hvr930c-drxk.fw", |
| .chunk_size = 56, |
| .qam_demod_parameter_count = 2, |
| }; |
| |
| static struct drxk_config terratec_htc_stick_drxk = { |
| .adr = 0x29, |
| .single_master = 1, |
| .no_i2c_bridge = 1, |
| .microcode_name = "dvb-usb-terratec-htc-stick-drxk.fw", |
| .chunk_size = 54, |
| .qam_demod_parameter_count = 2, |
| /* Required for the antenna_gpio to disable LNA. */ |
| .antenna_dvbt = true, |
| /* The windows driver uses the same. This will disable LNA. */ |
| .antenna_gpio = 0x6, |
| }; |
| |
| static struct drxk_config maxmedia_ub425_tc_drxk = { |
| .adr = 0x29, |
| .single_master = 1, |
| .no_i2c_bridge = 1, |
| .microcode_name = "dvb-demod-drxk-01.fw", |
| .chunk_size = 62, |
| .qam_demod_parameter_count = 2, |
| }; |
| |
| static struct drxk_config pctv_520e_drxk = { |
| .adr = 0x29, |
| .single_master = 1, |
| .microcode_name = "dvb-demod-drxk-pctv.fw", |
| .qam_demod_parameter_count = 2, |
| .chunk_size = 58, |
| .antenna_dvbt = true, /* disable LNA */ |
| .antenna_gpio = (1 << 2), /* disable LNA */ |
| }; |
| |
| static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable) |
| { |
| struct em28xx_dvb *dvb = fe->sec_priv; |
| int status; |
| |
| if (!dvb) |
| return -EINVAL; |
| |
| if (enable) { |
| down(&dvb->pll_mutex); |
| status = dvb->gate_ctrl(fe, 1); |
| } else { |
| status = dvb->gate_ctrl(fe, 0); |
| up(&dvb->pll_mutex); |
| } |
| return status; |
| } |
| |
| static void hauppauge_hvr930c_init(struct em28xx *dev) |
| { |
| int i; |
| |
| struct em28xx_reg_seq hauppauge_hvr930c_init[] = { |
| {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0x65}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xfb, 0xff, 0x32}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0xb8}, |
| { -1, -1, -1, -1}, |
| }; |
| struct em28xx_reg_seq hauppauge_hvr930c_end[] = { |
| {EM2874_R80_GPIO_P0_CTRL, 0xef, 0xff, 0x01}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xaf, 0xff, 0x65}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xef, 0xff, 0x76}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xef, 0xff, 0x01}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xcf, 0xff, 0x0b}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xef, 0xff, 0x40}, |
| |
| {EM2874_R80_GPIO_P0_CTRL, 0xcf, 0xff, 0x65}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xef, 0xff, 0x65}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xcf, 0xff, 0x0b}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xef, 0xff, 0x65}, |
| |
| { -1, -1, -1, -1}, |
| }; |
| |
| struct { |
| unsigned char r[4]; |
| int len; |
| } regs[] = { |
| {{ 0x06, 0x02, 0x00, 0x31 }, 4}, |
| {{ 0x01, 0x02 }, 2}, |
| {{ 0x01, 0x02, 0x00, 0xc6 }, 4}, |
| {{ 0x01, 0x00 }, 2}, |
| {{ 0x01, 0x00, 0xff, 0xaf }, 4}, |
| {{ 0x01, 0x00, 0x03, 0xa0 }, 4}, |
| {{ 0x01, 0x00 }, 2}, |
| {{ 0x01, 0x00, 0x73, 0xaf }, 4}, |
| {{ 0x04, 0x00 }, 2}, |
| {{ 0x00, 0x04 }, 2}, |
| {{ 0x00, 0x04, 0x00, 0x0a }, 4}, |
| {{ 0x04, 0x14 }, 2}, |
| {{ 0x04, 0x14, 0x00, 0x00 }, 4}, |
| }; |
| |
| em28xx_gpio_set(dev, hauppauge_hvr930c_init); |
| em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40); |
| usleep_range(10000, 11000); |
| em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x44); |
| usleep_range(10000, 11000); |
| |
| dev->i2c_client[dev->def_i2c_bus].addr = 0x82 >> 1; |
| |
| for (i = 0; i < ARRAY_SIZE(regs); i++) |
| i2c_master_send(&dev->i2c_client[dev->def_i2c_bus], |
| regs[i].r, regs[i].len); |
| em28xx_gpio_set(dev, hauppauge_hvr930c_end); |
| |
| msleep(100); |
| |
| em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x44); |
| msleep(30); |
| |
| em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x45); |
| usleep_range(10000, 11000); |
| } |
| |
| static void terratec_h5_init(struct em28xx *dev) |
| { |
| int i; |
| struct em28xx_reg_seq terratec_h5_init[] = { |
| {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xf2, 0xff, 50}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100}, |
| { -1, -1, -1, -1}, |
| }; |
| struct em28xx_reg_seq terratec_h5_end[] = { |
| {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 50}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, |
| { -1, -1, -1, -1}, |
| }; |
| struct { |
| unsigned char r[4]; |
| int len; |
| } regs[] = { |
| {{ 0x06, 0x02, 0x00, 0x31 }, 4}, |
| {{ 0x01, 0x02 }, 2}, |
| {{ 0x01, 0x02, 0x00, 0xc6 }, 4}, |
| {{ 0x01, 0x00 }, 2}, |
| {{ 0x01, 0x00, 0xff, 0xaf }, 4}, |
| {{ 0x01, 0x00, 0x03, 0xa0 }, 4}, |
| {{ 0x01, 0x00 }, 2}, |
| {{ 0x01, 0x00, 0x73, 0xaf }, 4}, |
| {{ 0x04, 0x00 }, 2}, |
| {{ 0x00, 0x04 }, 2}, |
| {{ 0x00, 0x04, 0x00, 0x0a }, 4}, |
| {{ 0x04, 0x14 }, 2}, |
| {{ 0x04, 0x14, 0x00, 0x00 }, 4}, |
| }; |
| |
| em28xx_gpio_set(dev, terratec_h5_init); |
| em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40); |
| usleep_range(10000, 11000); |
| em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x45); |
| usleep_range(10000, 11000); |
| |
| dev->i2c_client[dev->def_i2c_bus].addr = 0x82 >> 1; |
| |
| for (i = 0; i < ARRAY_SIZE(regs); i++) |
| i2c_master_send(&dev->i2c_client[dev->def_i2c_bus], |
| regs[i].r, regs[i].len); |
| em28xx_gpio_set(dev, terratec_h5_end); |
| }; |
| |
| static void terratec_htc_stick_init(struct em28xx *dev) |
| { |
| int i; |
| |
| /* |
| * GPIO configuration: |
| * 0xff: unknown (does not affect DVB-T). |
| * 0xf6: DRX-K (demodulator). |
| * 0xe6: unknown (does not affect DVB-T). |
| * 0xb6: unknown (does not affect DVB-T). |
| */ |
| struct em28xx_reg_seq terratec_htc_stick_init[] = { |
| {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 50}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100}, |
| { -1, -1, -1, -1}, |
| }; |
| struct em28xx_reg_seq terratec_htc_stick_end[] = { |
| {EM2874_R80_GPIO_P0_CTRL, 0xb6, 0xff, 100}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 50}, |
| { -1, -1, -1, -1}, |
| }; |
| |
| /* |
| * Init the analog decoder (not yet supported), but |
| * it's probably still a good idea. |
| */ |
| struct { |
| unsigned char r[4]; |
| int len; |
| } regs[] = { |
| {{ 0x06, 0x02, 0x00, 0x31 }, 4}, |
| {{ 0x01, 0x02 }, 2}, |
| {{ 0x01, 0x02, 0x00, 0xc6 }, 4}, |
| {{ 0x01, 0x00 }, 2}, |
| {{ 0x01, 0x00, 0xff, 0xaf }, 4}, |
| }; |
| |
| em28xx_gpio_set(dev, terratec_htc_stick_init); |
| |
| em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40); |
| usleep_range(10000, 11000); |
| em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x44); |
| usleep_range(10000, 11000); |
| |
| dev->i2c_client[dev->def_i2c_bus].addr = 0x82 >> 1; |
| |
| for (i = 0; i < ARRAY_SIZE(regs); i++) |
| i2c_master_send(&dev->i2c_client[dev->def_i2c_bus], |
| regs[i].r, regs[i].len); |
| |
| em28xx_gpio_set(dev, terratec_htc_stick_end); |
| }; |
| |
| static void terratec_htc_usb_xs_init(struct em28xx *dev) |
| { |
| int i; |
| |
| struct em28xx_reg_seq terratec_htc_usb_xs_init[] = { |
| {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xb2, 0xff, 100}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xb2, 0xff, 50}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xb6, 0xff, 100}, |
| { -1, -1, -1, -1}, |
| }; |
| struct em28xx_reg_seq terratec_htc_usb_xs_end[] = { |
| {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 100}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 50}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, |
| { -1, -1, -1, -1}, |
| }; |
| |
| /* |
| * Init the analog decoder (not yet supported), but |
| * it's probably still a good idea. |
| */ |
| struct { |
| unsigned char r[4]; |
| int len; |
| } regs[] = { |
| {{ 0x06, 0x02, 0x00, 0x31 }, 4}, |
| {{ 0x01, 0x02 }, 2}, |
| {{ 0x01, 0x02, 0x00, 0xc6 }, 4}, |
| {{ 0x01, 0x00 }, 2}, |
| {{ 0x01, 0x00, 0xff, 0xaf }, 4}, |
| {{ 0x01, 0x00, 0x03, 0xa0 }, 4}, |
| {{ 0x01, 0x00 }, 2}, |
| {{ 0x01, 0x00, 0x73, 0xaf }, 4}, |
| {{ 0x04, 0x00 }, 2}, |
| {{ 0x00, 0x04 }, 2}, |
| {{ 0x00, 0x04, 0x00, 0x0a }, 4}, |
| {{ 0x04, 0x14 }, 2}, |
| {{ 0x04, 0x14, 0x00, 0x00 }, 4}, |
| }; |
| |
| em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40); |
| |
| em28xx_gpio_set(dev, terratec_htc_usb_xs_init); |
| |
| em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x40); |
| usleep_range(10000, 11000); |
| em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x44); |
| usleep_range(10000, 11000); |
| |
| dev->i2c_client[dev->def_i2c_bus].addr = 0x82 >> 1; |
| |
| for (i = 0; i < ARRAY_SIZE(regs); i++) |
| i2c_master_send(&dev->i2c_client[dev->def_i2c_bus], |
| regs[i].r, regs[i].len); |
| |
| em28xx_gpio_set(dev, terratec_htc_usb_xs_end); |
| }; |
| |
| static void pctv_520e_init(struct em28xx *dev) |
| { |
| /* |
| * Init AVF4910B analog decoder. Looks like I2C traffic to |
| * digital demodulator and tuner are routed via AVF4910B. |
| */ |
| int i; |
| struct { |
| unsigned char r[4]; |
| int len; |
| } regs[] = { |
| {{ 0x06, 0x02, 0x00, 0x31 }, 4}, |
| {{ 0x01, 0x02 }, 2}, |
| {{ 0x01, 0x02, 0x00, 0xc6 }, 4}, |
| {{ 0x01, 0x00 }, 2}, |
| {{ 0x01, 0x00, 0xff, 0xaf }, 4}, |
| {{ 0x01, 0x00, 0x03, 0xa0 }, 4}, |
| {{ 0x01, 0x00 }, 2}, |
| {{ 0x01, 0x00, 0x73, 0xaf }, 4}, |
| }; |
| |
| dev->i2c_client[dev->def_i2c_bus].addr = 0x82 >> 1; /* 0x41 */ |
| |
| for (i = 0; i < ARRAY_SIZE(regs); i++) |
| i2c_master_send(&dev->i2c_client[dev->def_i2c_bus], |
| regs[i].r, regs[i].len); |
| }; |
| |
| static int em28xx_pctv_290e_set_lna(struct dvb_frontend *fe) |
| { |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| struct em28xx_i2c_bus *i2c_bus = fe->dvb->priv; |
| struct em28xx *dev = i2c_bus->dev; |
| #ifdef CONFIG_GPIOLIB |
| struct em28xx_dvb *dvb = dev->dvb; |
| int ret; |
| unsigned long flags; |
| |
| if (c->lna == 1) |
| flags = GPIOF_OUT_INIT_HIGH; /* enable LNA */ |
| else |
| flags = GPIOF_OUT_INIT_LOW; /* disable LNA */ |
| |
| ret = gpio_request_one(dvb->lna_gpio, flags, NULL); |
| if (ret) |
| dev_err(&dev->intf->dev, "gpio request failed %d\n", ret); |
| else |
| gpio_free(dvb->lna_gpio); |
| |
| return ret; |
| #else |
| dev_warn(&dev->intf->dev, "%s: LNA control is disabled (lna=%u)\n", |
| KBUILD_MODNAME, c->lna); |
| return 0; |
| #endif |
| } |
| |
| static int em28xx_pctv_292e_set_lna(struct dvb_frontend *fe) |
| { |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| struct em28xx_i2c_bus *i2c_bus = fe->dvb->priv; |
| struct em28xx *dev = i2c_bus->dev; |
| u8 lna; |
| |
| if (c->lna == 1) |
| lna = 0x01; |
| else |
| lna = 0x00; |
| |
| return em28xx_write_reg_bits(dev, EM2874_R80_GPIO_P0_CTRL, lna, 0x01); |
| } |
| |
| static int em28xx_mt352_terratec_xs_init(struct dvb_frontend *fe) |
| { |
| /* Values extracted from a USB trace of the Terratec Windows driver */ |
| static u8 clock_config[] = { CLOCK_CTL, 0x38, 0x2c }; |
| static u8 reset[] = { RESET, 0x80 }; |
| static u8 adc_ctl_1_cfg[] = { ADC_CTL_1, 0x40 }; |
| static u8 agc_cfg[] = { AGC_TARGET, 0x28, 0xa0 }; |
| static u8 input_freq_cfg[] = { INPUT_FREQ_1, 0x31, 0xb8 }; |
| static u8 rs_err_cfg[] = { RS_ERR_PER_1, 0x00, 0x4d }; |
| static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 }; |
| static u8 trl_nom_cfg[] = { TRL_NOMINAL_RATE_1, 0x64, 0x00 }; |
| static u8 tps_given_cfg[] = { TPS_GIVEN_1, 0x40, 0x80, 0x50 }; |
| static u8 tuner_go[] = { TUNER_GO, 0x01}; |
| |
| mt352_write(fe, clock_config, sizeof(clock_config)); |
| usleep_range(200, 250); |
| mt352_write(fe, reset, sizeof(reset)); |
| mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); |
| mt352_write(fe, agc_cfg, sizeof(agc_cfg)); |
| mt352_write(fe, input_freq_cfg, sizeof(input_freq_cfg)); |
| mt352_write(fe, rs_err_cfg, sizeof(rs_err_cfg)); |
| mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); |
| mt352_write(fe, trl_nom_cfg, sizeof(trl_nom_cfg)); |
| mt352_write(fe, tps_given_cfg, sizeof(tps_given_cfg)); |
| mt352_write(fe, tuner_go, sizeof(tuner_go)); |
| return 0; |
| } |
| |
| static void px_bcud_init(struct em28xx *dev) |
| { |
| int i; |
| struct { |
| unsigned char r[4]; |
| int len; |
| } regs1[] = { |
| {{ 0x0e, 0x77 }, 2}, |
| {{ 0x0f, 0x77 }, 2}, |
| {{ 0x03, 0x90 }, 2}, |
| }, regs2[] = { |
| {{ 0x07, 0x01 }, 2}, |
| {{ 0x08, 0x10 }, 2}, |
| {{ 0x13, 0x00 }, 2}, |
| {{ 0x17, 0x00 }, 2}, |
| {{ 0x03, 0x01 }, 2}, |
| {{ 0x10, 0xb1 }, 2}, |
| {{ 0x11, 0x40 }, 2}, |
| {{ 0x85, 0x7a }, 2}, |
| {{ 0x87, 0x04 }, 2}, |
| }; |
| static struct em28xx_reg_seq gpio[] = { |
| {EM28XX_R06_I2C_CLK, 0x40, 0xff, 300}, |
| {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 60}, |
| {EM28XX_R15_RGAIN, 0x20, 0xff, 0}, |
| {EM28XX_R16_GGAIN, 0x20, 0xff, 0}, |
| {EM28XX_R17_BGAIN, 0x20, 0xff, 0}, |
| {EM28XX_R18_ROFFSET, 0x00, 0xff, 0}, |
| {EM28XX_R19_GOFFSET, 0x00, 0xff, 0}, |
| {EM28XX_R1A_BOFFSET, 0x00, 0xff, 0}, |
| {EM28XX_R23_UOFFSET, 0x00, 0xff, 0}, |
| {EM28XX_R24_VOFFSET, 0x00, 0xff, 0}, |
| {EM28XX_R26_COMPR, 0x00, 0xff, 0}, |
| {0x13, 0x08, 0xff, 0}, |
| {EM28XX_R12_VINENABLE, 0x27, 0xff, 0}, |
| {EM28XX_R0C_USBSUSP, 0x10, 0xff, 0}, |
| {EM28XX_R27_OUTFMT, 0x00, 0xff, 0}, |
| {EM28XX_R10_VINMODE, 0x00, 0xff, 0}, |
| {EM28XX_R11_VINCTRL, 0x11, 0xff, 0}, |
| {EM2874_R50_IR_CONFIG, 0x01, 0xff, 0}, |
| {EM2874_R5F_TS_ENABLE, 0x80, 0xff, 0}, |
| {EM28XX_R06_I2C_CLK, 0x46, 0xff, 0}, |
| }; |
| em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, 0x46); |
| /* sleeping ISDB-T */ |
| dev->dvb->i2c_client_demod->addr = 0x14; |
| for (i = 0; i < ARRAY_SIZE(regs1); i++) |
| i2c_master_send(dev->dvb->i2c_client_demod, |
| regs1[i].r, regs1[i].len); |
| /* sleeping ISDB-S */ |
| dev->dvb->i2c_client_demod->addr = 0x15; |
| for (i = 0; i < ARRAY_SIZE(regs2); i++) |
| i2c_master_send(dev->dvb->i2c_client_demod, regs2[i].r, |
| regs2[i].len); |
| for (i = 0; i < ARRAY_SIZE(gpio); i++) { |
| em28xx_write_reg_bits(dev, gpio[i].reg, gpio[i].val, |
| gpio[i].mask); |
| if (gpio[i].sleep > 0) |
| msleep(gpio[i].sleep); |
| } |
| }; |
| |
| static struct mt352_config terratec_xs_mt352_cfg = { |
| .demod_address = (0x1e >> 1), |
| .no_tuner = 1, |
| .if2 = 45600, |
| .demod_init = em28xx_mt352_terratec_xs_init, |
| }; |
| |
| static struct tda10023_config em28xx_tda10023_config = { |
| .demod_address = 0x0c, |
| .invert = 1, |
| }; |
| |
| static struct cxd2820r_config em28xx_cxd2820r_config = { |
| .i2c_address = (0xd8 >> 1), |
| .ts_mode = CXD2820R_TS_SERIAL, |
| }; |
| |
| static struct tda18271_config em28xx_cxd2820r_tda18271_config = { |
| .output_opt = TDA18271_OUTPUT_LT_OFF, |
| .gate = TDA18271_GATE_DIGITAL, |
| }; |
| |
| static struct zl10353_config em28xx_zl10353_no_i2c_gate_dev = { |
| .demod_address = (0x1e >> 1), |
| .disable_i2c_gate_ctrl = 1, |
| .no_tuner = 1, |
| .parallel_ts = 1, |
| }; |
| |
| static struct mt2060_config em28xx_mt2060_config = { |
| .i2c_address = 0x60, |
| }; |
| |
| static struct qt1010_config em28xx_qt1010_config = { |
| .i2c_address = 0x62 |
| }; |
| |
| static const struct mb86a20s_config c3tech_duo_mb86a20s_config = { |
| .demod_address = 0x10, |
| .is_serial = true, |
| }; |
| |
| static struct tda18271_std_map mb86a20s_tda18271_config = { |
| .dvbt_6 = { .if_freq = 4000, .agc_mode = 3, .std = 4, |
| .if_lvl = 1, .rfagc_top = 0x37, }, |
| }; |
| |
| static struct tda18271_config c3tech_duo_tda18271_config = { |
| .std_map = &mb86a20s_tda18271_config, |
| .gate = TDA18271_GATE_DIGITAL, |
| .small_i2c = TDA18271_03_BYTE_CHUNK_INIT, |
| }; |
| |
| static struct tda18271_std_map drx_j_std_map = { |
| .atsc_6 = { .if_freq = 5000, .agc_mode = 3, .std = 0, .if_lvl = 1, |
| .rfagc_top = 0x37, }, |
| .qam_6 = { .if_freq = 5380, .agc_mode = 3, .std = 3, .if_lvl = 1, |
| .rfagc_top = 0x37, }, |
| }; |
| |
| static struct tda18271_config pinnacle_80e_dvb_config = { |
| .std_map = &drx_j_std_map, |
| .gate = TDA18271_GATE_DIGITAL, |
| .role = TDA18271_MASTER, |
| }; |
| |
| static struct lgdt3306a_config hauppauge_01595_lgdt3306a_config = { |
| .qam_if_khz = 4000, |
| .vsb_if_khz = 3250, |
| .spectral_inversion = 0, |
| .deny_i2c_rptr = 0, |
| .mpeg_mode = LGDT3306A_MPEG_SERIAL, |
| .tpclk_edge = LGDT3306A_TPCLK_RISING_EDGE, |
| .tpvalid_polarity = LGDT3306A_TP_VALID_HIGH, |
| .xtalMHz = 25, |
| }; |
| |
| /* ------------------------------------------------------------------ */ |
| |
| static noinline_for_stack int em28xx_attach_xc3028(u8 addr, struct em28xx *dev) |
| { |
| struct dvb_frontend *fe; |
| struct xc2028_config cfg; |
| struct xc2028_ctrl ctl; |
| |
| memset(&cfg, 0, sizeof(cfg)); |
| cfg.i2c_adap = &dev->i2c_adap[dev->def_i2c_bus]; |
| cfg.i2c_addr = addr; |
| |
| memset(&ctl, 0, sizeof(ctl)); |
| em28xx_setup_xc3028(dev, &ctl); |
| cfg.ctrl = &ctl; |
| |
| if (!dev->dvb->fe[0]) { |
| dev_err(&dev->intf->dev, |
| "dvb frontend not attached. Can't attach xc3028\n"); |
| return -EINVAL; |
| } |
| |
| fe = dvb_attach(xc2028_attach, dev->dvb->fe[0], &cfg); |
| if (!fe) { |
| dev_err(&dev->intf->dev, "xc3028 attach failed\n"); |
| dvb_frontend_detach(dev->dvb->fe[0]); |
| dev->dvb->fe[0] = NULL; |
| return -EINVAL; |
| } |
| |
| dev_info(&dev->intf->dev, "xc3028 attached\n"); |
| |
| return 0; |
| } |
| |
| /* ------------------------------------------------------------------ */ |
| |
| static int em28xx_register_dvb(struct em28xx_dvb *dvb, struct module *module, |
| struct em28xx *dev, struct device *device) |
| { |
| int result; |
| bool create_rf_connector = false; |
| |
| mutex_init(&dvb->lock); |
| |
| /* register adapter */ |
| result = dvb_register_adapter(&dvb->adapter, |
| dev_name(&dev->intf->dev), module, |
| device, adapter_nr); |
| if (result < 0) { |
| dev_warn(&dev->intf->dev, |
| "dvb_register_adapter failed (errno = %d)\n", |
| result); |
| goto fail_adapter; |
| } |
| #ifdef CONFIG_MEDIA_CONTROLLER_DVB |
| dvb->adapter.mdev = dev->media_dev; |
| #endif |
| |
| /* Ensure all frontends negotiate bus access */ |
| dvb->fe[0]->ops.ts_bus_ctrl = em28xx_dvb_bus_ctrl; |
| if (dvb->fe[1]) |
| dvb->fe[1]->ops.ts_bus_ctrl = em28xx_dvb_bus_ctrl; |
| |
| dvb->adapter.priv = &dev->i2c_bus[dev->def_i2c_bus]; |
| |
| /* register frontend */ |
| result = dvb_register_frontend(&dvb->adapter, dvb->fe[0]); |
| if (result < 0) { |
| dev_warn(&dev->intf->dev, |
| "dvb_register_frontend failed (errno = %d)\n", |
| result); |
| goto fail_frontend0; |
| } |
| |
| /* register 2nd frontend */ |
| if (dvb->fe[1]) { |
| result = dvb_register_frontend(&dvb->adapter, dvb->fe[1]); |
| if (result < 0) { |
| dev_warn(&dev->intf->dev, |
| "2nd dvb_register_frontend failed (errno = %d)\n", |
| result); |
| goto fail_frontend1; |
| } |
| } |
| |
| /* register demux stuff */ |
| dvb->demux.dmx.capabilities = |
| DMX_TS_FILTERING | DMX_SECTION_FILTERING | |
| DMX_MEMORY_BASED_FILTERING; |
| dvb->demux.priv = dvb; |
| dvb->demux.filternum = 256; |
| dvb->demux.feednum = 256; |
| dvb->demux.start_feed = em28xx_start_feed; |
| dvb->demux.stop_feed = em28xx_stop_feed; |
| |
| result = dvb_dmx_init(&dvb->demux); |
| if (result < 0) { |
| dev_warn(&dev->intf->dev, |
| "dvb_dmx_init failed (errno = %d)\n", |
| result); |
| goto fail_dmx; |
| } |
| |
| dvb->dmxdev.filternum = 256; |
| dvb->dmxdev.demux = &dvb->demux.dmx; |
| dvb->dmxdev.capabilities = 0; |
| result = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter); |
| if (result < 0) { |
| dev_warn(&dev->intf->dev, |
| "dvb_dmxdev_init failed (errno = %d)\n", |
| result); |
| goto fail_dmxdev; |
| } |
| |
| dvb->fe_hw.source = DMX_FRONTEND_0; |
| result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_hw); |
| if (result < 0) { |
| dev_warn(&dev->intf->dev, |
| "add_frontend failed (DMX_FRONTEND_0, errno = %d)\n", |
| result); |
| goto fail_fe_hw; |
| } |
| |
| dvb->fe_mem.source = DMX_MEMORY_FE; |
| result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_mem); |
| if (result < 0) { |
| dev_warn(&dev->intf->dev, |
| "add_frontend failed (DMX_MEMORY_FE, errno = %d)\n", |
| result); |
| goto fail_fe_mem; |
| } |
| |
| result = dvb->demux.dmx.connect_frontend(&dvb->demux.dmx, &dvb->fe_hw); |
| if (result < 0) { |
| dev_warn(&dev->intf->dev, |
| "connect_frontend failed (errno = %d)\n", |
| result); |
| goto fail_fe_conn; |
| } |
| |
| /* register network adapter */ |
| dvb_net_init(&dvb->adapter, &dvb->net, &dvb->demux.dmx); |
| |
| /* If the analog part won't create RF connectors, DVB will do it */ |
| if (!dev->has_video || dev->tuner_type == TUNER_ABSENT) |
| create_rf_connector = true; |
| |
| result = dvb_create_media_graph(&dvb->adapter, create_rf_connector); |
| if (result < 0) |
| goto fail_create_graph; |
| |
| return 0; |
| |
| fail_create_graph: |
| dvb_net_release(&dvb->net); |
| fail_fe_conn: |
| dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem); |
| fail_fe_mem: |
| dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw); |
| fail_fe_hw: |
| dvb_dmxdev_release(&dvb->dmxdev); |
| fail_dmxdev: |
| dvb_dmx_release(&dvb->demux); |
| fail_dmx: |
| if (dvb->fe[1]) |
| dvb_unregister_frontend(dvb->fe[1]); |
| dvb_unregister_frontend(dvb->fe[0]); |
| fail_frontend1: |
| if (dvb->fe[1]) |
| dvb_frontend_detach(dvb->fe[1]); |
| fail_frontend0: |
| dvb_frontend_detach(dvb->fe[0]); |
| dvb_unregister_adapter(&dvb->adapter); |
| fail_adapter: |
| return result; |
| } |
| |
| static void em28xx_unregister_dvb(struct em28xx_dvb *dvb) |
| { |
| dvb_net_release(&dvb->net); |
| dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem); |
| dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw); |
| dvb_dmxdev_release(&dvb->dmxdev); |
| dvb_dmx_release(&dvb->demux); |
| if (dvb->fe[1]) |
| dvb_unregister_frontend(dvb->fe[1]); |
| dvb_unregister_frontend(dvb->fe[0]); |
| if (dvb->fe[1] && !dvb->dont_attach_fe1) |
| dvb_frontend_detach(dvb->fe[1]); |
| dvb_frontend_detach(dvb->fe[0]); |
| dvb_unregister_adapter(&dvb->adapter); |
| } |
| |
| static int em28174_dvb_init_pctv_460e(struct em28xx *dev) |
| { |
| struct em28xx_dvb *dvb = dev->dvb; |
| struct tda10071_platform_data tda10071_pdata = {}; |
| struct a8293_platform_data a8293_pdata = {}; |
| |
| /* attach demod + tuner combo */ |
| tda10071_pdata.clk = 40444000; /* 40.444 MHz */ |
| tda10071_pdata.i2c_wr_max = 64; |
| tda10071_pdata.ts_mode = TDA10071_TS_SERIAL; |
| tda10071_pdata.pll_multiplier = 20; |
| tda10071_pdata.tuner_i2c_addr = 0x14; |
| |
| dvb->i2c_client_demod = dvb_module_probe("tda10071", "tda10071_cx24118", |
| &dev->i2c_adap[dev->def_i2c_bus], |
| 0x55, &tda10071_pdata); |
| if (!dvb->i2c_client_demod) |
| return -ENODEV; |
| |
| dvb->fe[0] = tda10071_pdata.get_dvb_frontend(dvb->i2c_client_demod); |
| |
| /* attach SEC */ |
| a8293_pdata.dvb_frontend = dvb->fe[0]; |
| |
| dvb->i2c_client_sec = dvb_module_probe("a8293", NULL, |
| &dev->i2c_adap[dev->def_i2c_bus], |
| 0x08, &a8293_pdata); |
| if (!dvb->i2c_client_sec) { |
| dvb_module_release(dvb->i2c_client_demod); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| static int em28178_dvb_init_pctv_461e(struct em28xx *dev) |
| { |
| struct em28xx_dvb *dvb = dev->dvb; |
| struct i2c_adapter *i2c_adapter; |
| struct m88ds3103_platform_data m88ds3103_pdata = {}; |
| struct ts2020_config ts2020_config = {}; |
| struct a8293_platform_data a8293_pdata = {}; |
| |
| /* attach demod */ |
| m88ds3103_pdata.clk = 27000000; |
| m88ds3103_pdata.i2c_wr_max = 33; |
| m88ds3103_pdata.ts_mode = M88DS3103_TS_PARALLEL; |
| m88ds3103_pdata.ts_clk = 16000; |
| m88ds3103_pdata.ts_clk_pol = 1; |
| m88ds3103_pdata.agc = 0x99; |
| |
| dvb->i2c_client_demod = dvb_module_probe("m88ds3103", NULL, |
| &dev->i2c_adap[dev->def_i2c_bus], |
| 0x68, &m88ds3103_pdata); |
| if (!dvb->i2c_client_demod) |
| return -ENODEV; |
| |
| dvb->fe[0] = m88ds3103_pdata.get_dvb_frontend(dvb->i2c_client_demod); |
| i2c_adapter = m88ds3103_pdata.get_i2c_adapter(dvb->i2c_client_demod); |
| |
| /* attach tuner */ |
| ts2020_config.fe = dvb->fe[0]; |
| |
| dvb->i2c_client_tuner = dvb_module_probe("ts2020", "ts2022", |
| i2c_adapter, |
| 0x60, &ts2020_config); |
| if (!dvb->i2c_client_tuner) { |
| dvb_module_release(dvb->i2c_client_demod); |
| return -ENODEV; |
| } |
| |
| /* delegate signal strength measurement to tuner */ |
| dvb->fe[0]->ops.read_signal_strength = |
| dvb->fe[0]->ops.tuner_ops.get_rf_strength; |
| |
| /* attach SEC */ |
| a8293_pdata.dvb_frontend = dvb->fe[0]; |
| dvb->i2c_client_sec = dvb_module_probe("a8293", NULL, |
| &dev->i2c_adap[dev->def_i2c_bus], |
| 0x08, &a8293_pdata); |
| if (!dvb->i2c_client_sec) { |
| dvb_module_release(dvb->i2c_client_tuner); |
| dvb_module_release(dvb->i2c_client_demod); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| static int em28178_dvb_init_pctv_292e(struct em28xx *dev) |
| { |
| struct em28xx_dvb *dvb = dev->dvb; |
| struct i2c_adapter *adapter; |
| struct si2168_config si2168_config = {}; |
| struct si2157_config si2157_config = {}; |
| |
| /* attach demod */ |
| si2168_config.i2c_adapter = &adapter; |
| si2168_config.fe = &dvb->fe[0]; |
| si2168_config.ts_mode = SI2168_TS_PARALLEL; |
| si2168_config.spectral_inversion = true; |
| |
| dvb->i2c_client_demod = dvb_module_probe("si2168", NULL, |
| &dev->i2c_adap[dev->def_i2c_bus], |
| 0x64, &si2168_config); |
| if (!dvb->i2c_client_demod) |
| return -ENODEV; |
| |
| /* attach tuner */ |
| si2157_config.fe = dvb->fe[0]; |
| si2157_config.if_port = 1; |
| #ifdef CONFIG_MEDIA_CONTROLLER_DVB |
| si2157_config.mdev = dev->media_dev; |
| #endif |
| dvb->i2c_client_tuner = dvb_module_probe("si2157", NULL, |
| adapter, |
| 0x60, &si2157_config); |
| if (!dvb->i2c_client_tuner) { |
| dvb_module_release(dvb->i2c_client_demod); |
| return -ENODEV; |
| } |
| dvb->fe[0]->ops.set_lna = em28xx_pctv_292e_set_lna; |
| |
| return 0; |
| } |
| |
| static int em28178_dvb_init_terratec_t2_stick_hd(struct em28xx *dev) |
| { |
| struct em28xx_dvb *dvb = dev->dvb; |
| struct i2c_adapter *adapter; |
| struct si2168_config si2168_config = {}; |
| struct si2157_config si2157_config = {}; |
| |
| /* attach demod */ |
| si2168_config.i2c_adapter = &adapter; |
| si2168_config.fe = &dvb->fe[0]; |
| si2168_config.ts_mode = SI2168_TS_PARALLEL; |
| |
| dvb->i2c_client_demod = dvb_module_probe("si2168", NULL, |
| &dev->i2c_adap[dev->def_i2c_bus], |
| 0x64, &si2168_config); |
| if (!dvb->i2c_client_demod) |
| return -ENODEV; |
| |
| /* attach tuner */ |
| memset(&si2157_config, 0, sizeof(si2157_config)); |
| si2157_config.fe = dvb->fe[0]; |
| si2157_config.if_port = 0; |
| #ifdef CONFIG_MEDIA_CONTROLLER_DVB |
| si2157_config.mdev = dev->media_dev; |
| #endif |
| dvb->i2c_client_tuner = dvb_module_probe("si2157", "si2146", |
| adapter, |
| 0x60, &si2157_config); |
| if (!dvb->i2c_client_tuner) { |
| dvb_module_release(dvb->i2c_client_demod); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| static int em28178_dvb_init_plex_px_bcud(struct em28xx *dev) |
| { |
| struct em28xx_dvb *dvb = dev->dvb; |
| struct tc90522_config tc90522_config = {}; |
| struct qm1d1c0042_config qm1d1c0042_config = {}; |
| |
| /* attach demod */ |
| dvb->i2c_client_demod = dvb_module_probe("tc90522", "tc90522sat", |
| &dev->i2c_adap[dev->def_i2c_bus], |
| 0x15, &tc90522_config); |
| if (!dvb->i2c_client_demod) |
| return -ENODEV; |
| |
| /* attach tuner */ |
| qm1d1c0042_config.fe = tc90522_config.fe; |
| qm1d1c0042_config.lpf = 1; |
| |
| dvb->i2c_client_tuner = dvb_module_probe("qm1d1c0042", NULL, |
| tc90522_config.tuner_i2c, |
| 0x61, &qm1d1c0042_config); |
| if (!dvb->i2c_client_tuner) { |
| dvb_module_release(dvb->i2c_client_demod); |
| return -ENODEV; |
| } |
| |
| dvb->fe[0] = tc90522_config.fe; |
| px_bcud_init(dev); |
| |
| return 0; |
| } |
| |
| static int em28174_dvb_init_hauppauge_wintv_dualhd_dvb(struct em28xx *dev) |
| { |
| struct em28xx_dvb *dvb = dev->dvb; |
| struct i2c_adapter *adapter; |
| struct si2168_config si2168_config = {}; |
| struct si2157_config si2157_config = {}; |
| unsigned char addr; |
| |
| /* attach demod */ |
| si2168_config.i2c_adapter = &adapter; |
| si2168_config.fe = &dvb->fe[0]; |
| si2168_config.ts_mode = SI2168_TS_SERIAL; |
| si2168_config.spectral_inversion = true; |
| addr = (dev->ts == PRIMARY_TS) ? 0x64 : 0x67; |
| |
| dvb->i2c_client_demod = dvb_module_probe("si2168", NULL, |
| &dev->i2c_adap[dev->def_i2c_bus], |
| addr, &si2168_config); |
| if (!dvb->i2c_client_demod) |
| return -ENODEV; |
| |
| /* attach tuner */ |
| memset(&si2157_config, 0, sizeof(si2157_config)); |
| si2157_config.fe = dvb->fe[0]; |
| si2157_config.if_port = 1; |
| #ifdef CONFIG_MEDIA_CONTROLLER_DVB |
| si2157_config.mdev = dev->media_dev; |
| #endif |
| addr = (dev->ts == PRIMARY_TS) ? 0x60 : 0x63; |
| |
| dvb->i2c_client_tuner = dvb_module_probe("si2157", NULL, |
| adapter, |
| addr, &si2157_config); |
| if (!dvb->i2c_client_tuner) { |
| dvb_module_release(dvb->i2c_client_demod); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| static int em28174_dvb_init_hauppauge_wintv_dualhd_01595(struct em28xx *dev) |
| { |
| struct em28xx_dvb *dvb = dev->dvb; |
| struct i2c_adapter *adapter; |
| struct lgdt3306a_config lgdt3306a_config = {}; |
| struct si2157_config si2157_config = {}; |
| unsigned char addr; |
| |
| /* attach demod */ |
| lgdt3306a_config = hauppauge_01595_lgdt3306a_config; |
| lgdt3306a_config.fe = &dvb->fe[0]; |
| lgdt3306a_config.i2c_adapter = &adapter; |
| addr = (dev->ts == PRIMARY_TS) ? 0x59 : 0x0e; |
| |
| dvb->i2c_client_demod = dvb_module_probe("lgdt3306a", NULL, |
| &dev->i2c_adap[dev->def_i2c_bus], |
| addr, &lgdt3306a_config); |
| if (!dvb->i2c_client_demod) |
| return -ENODEV; |
| |
| /* attach tuner */ |
| si2157_config.fe = dvb->fe[0]; |
| si2157_config.if_port = 1; |
| si2157_config.inversion = 1; |
| #ifdef CONFIG_MEDIA_CONTROLLER_DVB |
| si2157_config.mdev = dev->media_dev; |
| #endif |
| addr = (dev->ts == PRIMARY_TS) ? 0x60 : 0x62; |
| |
| dvb->i2c_client_tuner = dvb_module_probe("si2157", NULL, |
| adapter, |
| 0x60, &si2157_config); |
| if (!dvb->i2c_client_tuner) { |
| dvb_module_release(dvb->i2c_client_demod); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| static int em28xx_dvb_init(struct em28xx *dev) |
| { |
| int result = 0, dvb_alt = 0; |
| struct em28xx_dvb *dvb; |
| struct usb_device *udev; |
| |
| if (dev->is_audio_only) { |
| /* Shouldn't initialize IR for this interface */ |
| return 0; |
| } |
| |
| if (!dev->board.has_dvb) { |
| /* This device does not support the extension */ |
| return 0; |
| } |
| |
| dev_info(&dev->intf->dev, "Binding DVB extension\n"); |
| |
| dvb = kzalloc(sizeof(*dvb), GFP_KERNEL); |
| if (!dvb) |
| return -ENOMEM; |
| |
| dev->dvb = dvb; |
| dvb->fe[0] = NULL; |
| dvb->fe[1] = NULL; |
| |
| /* pre-allocate DVB usb transfer buffers */ |
| if (dev->dvb_xfer_bulk) { |
| result = em28xx_alloc_urbs(dev, EM28XX_DIGITAL_MODE, |
| dev->dvb_xfer_bulk, |
| EM28XX_DVB_NUM_BUFS, |
| 512, |
| EM28XX_DVB_BULK_PACKET_MULTIPLIER); |
| } else { |
| result = em28xx_alloc_urbs(dev, EM28XX_DIGITAL_MODE, |
| dev->dvb_xfer_bulk, |
| EM28XX_DVB_NUM_BUFS, |
| dev->dvb_max_pkt_size_isoc, |
| EM28XX_DVB_NUM_ISOC_PACKETS); |
| } |
| if (result) { |
| dev_err(&dev->intf->dev, |
| "failed to pre-allocate USB transfer buffers for DVB.\n"); |
| kfree(dvb); |
| dev->dvb = NULL; |
| return result; |
| } |
| |
| mutex_lock(&dev->lock); |
| em28xx_set_mode(dev, EM28XX_DIGITAL_MODE); |
| /* init frontend */ |
| switch (dev->model) { |
| case EM2874_BOARD_LEADERSHIP_ISDBT: |
| dvb->fe[0] = dvb_attach(s921_attach, |
| &sharp_isdbt, |
| &dev->i2c_adap[dev->def_i2c_bus]); |
| |
| if (!dvb->fe[0]) { |
| result = -EINVAL; |
| goto out_free; |
| } |
| |
| break; |
| case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: |
| case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: |
| case EM2880_BOARD_PINNACLE_PCTV_HD_PRO: |
| case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600: |
| dvb->fe[0] = dvb_attach(lgdt330x_attach, |
| &em2880_lgdt3303_dev, |
| &dev->i2c_adap[dev->def_i2c_bus]); |
| if (em28xx_attach_xc3028(0x61, dev) < 0) { |
| result = -EINVAL; |
| goto out_free; |
| } |
| break; |
| case EM2880_BOARD_KWORLD_DVB_310U: |
| dvb->fe[0] = dvb_attach(zl10353_attach, |
| &em28xx_zl10353_with_xc3028, |
| &dev->i2c_adap[dev->def_i2c_bus]); |
| if (em28xx_attach_xc3028(0x61, dev) < 0) { |
| result = -EINVAL; |
| goto out_free; |
| } |
| break; |
| case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: |
| case EM2882_BOARD_TERRATEC_HYBRID_XS: |
| case EM2880_BOARD_EMPIRE_DUAL_TV: |
| dvb->fe[0] = dvb_attach(zl10353_attach, |
| &em28xx_zl10353_xc3028_no_i2c_gate, |
| &dev->i2c_adap[dev->def_i2c_bus]); |
| if (em28xx_attach_xc3028(0x61, dev) < 0) { |
| result = -EINVAL; |
| goto out_free; |
| } |
| break; |
| case EM2880_BOARD_TERRATEC_HYBRID_XS: |
| case EM2880_BOARD_TERRATEC_HYBRID_XS_FR: |
| case EM2881_BOARD_PINNACLE_HYBRID_PRO: |
| case EM2882_BOARD_DIKOM_DK300: |
| case EM2882_BOARD_KWORLD_VS_DVBT: |
| /* |
| * Those boards could have either a zl10353 or a mt352. |
| * If the chip id isn't for zl10353, try mt352. |
| */ |
| dvb->fe[0] = dvb_attach(zl10353_attach, |
| &em28xx_zl10353_xc3028_no_i2c_gate, |
| &dev->i2c_adap[dev->def_i2c_bus]); |
| if (!dvb->fe[0]) |
| dvb->fe[0] = dvb_attach(mt352_attach, |
| &terratec_xs_mt352_cfg, |
| &dev->i2c_adap[dev->def_i2c_bus]); |
| |
| if (em28xx_attach_xc3028(0x61, dev) < 0) { |
| result = -EINVAL; |
| goto out_free; |
| } |
| break; |
| case EM2870_BOARD_TERRATEC_XS_MT2060: |
| dvb->fe[0] = dvb_attach(zl10353_attach, |
| &em28xx_zl10353_no_i2c_gate_dev, |
| &dev->i2c_adap[dev->def_i2c_bus]); |
| if (dvb->fe[0]) { |
| dvb_attach(mt2060_attach, dvb->fe[0], |
| &dev->i2c_adap[dev->def_i2c_bus], |
| &em28xx_mt2060_config, 1220); |
| } |
| break; |
| case EM2870_BOARD_KWORLD_355U: |
| dvb->fe[0] = dvb_attach(zl10353_attach, |
| &em28xx_zl10353_no_i2c_gate_dev, |
| &dev->i2c_adap[dev->def_i2c_bus]); |
| if (dvb->fe[0]) |
| dvb_attach(qt1010_attach, dvb->fe[0], |
| &dev->i2c_adap[dev->def_i2c_bus], |
| &em28xx_qt1010_config); |
| break; |
| case EM2883_BOARD_KWORLD_HYBRID_330U: |
| case EM2882_BOARD_EVGA_INDTUBE: |
| dvb->fe[0] = dvb_attach(s5h1409_attach, |
| &em28xx_s5h1409_with_xc3028, |
| &dev->i2c_adap[dev->def_i2c_bus]); |
| if (em28xx_attach_xc3028(0x61, dev) < 0) { |
| result = -EINVAL; |
| goto out_free; |
| } |
| break; |
| case EM2882_BOARD_KWORLD_ATSC_315U: |
| dvb->fe[0] = dvb_attach(lgdt330x_attach, |
| &em2880_lgdt3303_dev, |
| &dev->i2c_adap[dev->def_i2c_bus]); |
| if (dvb->fe[0]) { |
| if (!dvb_attach(simple_tuner_attach, dvb->fe[0], |
| &dev->i2c_adap[dev->def_i2c_bus], |
| 0x61, TUNER_THOMSON_DTT761X)) { |
| result = -EINVAL; |
| goto out_free; |
| } |
| } |
| break; |
| case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: |
| case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E: |
| dvb->fe[0] = dvb_attach(drxd_attach, &em28xx_drxd, NULL, |
| &dev->i2c_adap[dev->def_i2c_bus], |
| &dev->intf->dev); |
| if (em28xx_attach_xc3028(0x61, dev) < 0) { |
| result = -EINVAL; |
| goto out_free; |
| } |
| break; |
| case EM2870_BOARD_REDDO_DVB_C_USB_BOX: |
| /* Philips CU1216L NIM (Philips TDA10023 + Infineon TUA6034) */ |
| dvb->fe[0] = dvb_attach(tda10023_attach, |
| &em28xx_tda10023_config, |
| &dev->i2c_adap[dev->def_i2c_bus], |
| 0x48); |
| if (dvb->fe[0]) { |
| if (!dvb_attach(simple_tuner_attach, dvb->fe[0], |
| &dev->i2c_adap[dev->def_i2c_bus], |
| 0x60, TUNER_PHILIPS_CU1216L)) { |
| result = -EINVAL; |
| goto out_free; |
| } |
| } |
| break; |
| case EM2870_BOARD_KWORLD_A340: |
| dvb->fe[0] = dvb_attach(lgdt3305_attach, |
| &em2870_lgdt3304_dev, |
| &dev->i2c_adap[dev->def_i2c_bus]); |
| if (!dvb->fe[0]) { |
| result = -EINVAL; |
| goto out_free; |
| } |
| if (!dvb_attach(tda18271_attach, dvb->fe[0], 0x60, |
| &dev->i2c_adap[dev->def_i2c_bus], |
| &kworld_a340_config)) { |
| dvb_frontend_detach(dvb->fe[0]); |
| result = -EINVAL; |
| goto out_free; |
| } |
| break; |
| case EM28174_BOARD_PCTV_290E: |
| /* set default GPIO0 for LNA, used if GPIOLIB is undefined */ |
| dvb->lna_gpio = CXD2820R_GPIO_E | CXD2820R_GPIO_O | |
| CXD2820R_GPIO_L; |
| dvb->fe[0] = dvb_attach(cxd2820r_attach, |
| &em28xx_cxd2820r_config, |
| &dev->i2c_adap[dev->def_i2c_bus], |
| &dvb->lna_gpio); |
| if (dvb->fe[0]) { |
| /* FE 0 attach tuner */ |
| if (!dvb_attach(tda18271_attach, |
| dvb->fe[0], |
| 0x60, |
| &dev->i2c_adap[dev->def_i2c_bus], |
| &em28xx_cxd2820r_tda18271_config)) { |
| dvb_frontend_detach(dvb->fe[0]); |
| result = -EINVAL; |
| goto out_free; |
| } |
| |
| #ifdef CONFIG_GPIOLIB |
| /* enable LNA for DVB-T, DVB-T2 and DVB-C */ |
| result = gpio_request_one(dvb->lna_gpio, |
| GPIOF_OUT_INIT_LOW, NULL); |
| if (result) |
| dev_err(&dev->intf->dev, |
| "gpio request failed %d\n", |
| result); |
| else |
| gpio_free(dvb->lna_gpio); |
| |
| result = 0; /* continue even set LNA fails */ |
| #endif |
| dvb->fe[0]->ops.set_lna = em28xx_pctv_290e_set_lna; |
| } |
| |
| break; |
| case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C: |
| { |
| struct xc5000_config cfg = {}; |
| |
| hauppauge_hvr930c_init(dev); |
| |
| dvb->fe[0] = dvb_attach(drxk_attach, |
| &hauppauge_930c_drxk, |
| &dev->i2c_adap[dev->def_i2c_bus]); |
| if (!dvb->fe[0]) { |
| result = -EINVAL; |
| goto out_free; |
| } |
| /* FIXME: do we need a pll semaphore? */ |
| dvb->fe[0]->sec_priv = dvb; |
| sema_init(&dvb->pll_mutex, 1); |
| dvb->gate_ctrl = dvb->fe[0]->ops.i2c_gate_ctrl; |
| dvb->fe[0]->ops.i2c_gate_ctrl = drxk_gate_ctrl; |
| |
| /* Attach xc5000 */ |
| cfg.i2c_address = 0x61; |
| cfg.if_khz = 4000; |
| |
| if (dvb->fe[0]->ops.i2c_gate_ctrl) |
| dvb->fe[0]->ops.i2c_gate_ctrl(dvb->fe[0], 1); |
| if (!dvb_attach(xc5000_attach, dvb->fe[0], |
| &dev->i2c_adap[dev->def_i2c_bus], &cfg)) { |
| result = -EINVAL; |
| goto out_free; |
| } |
| if (dvb->fe[0]->ops.i2c_gate_ctrl) |
| dvb->fe[0]->ops.i2c_gate_ctrl(dvb->fe[0], 0); |
| |
| break; |
| } |
| case EM2884_BOARD_TERRATEC_H5: |
| terratec_h5_init(dev); |
| |
| dvb->fe[0] = dvb_attach(drxk_attach, &terratec_h5_drxk, |
| &dev->i2c_adap[dev->def_i2c_bus]); |
| if (!dvb->fe[0]) { |
| result = -EINVAL; |
| goto out_free; |
| } |
| /* FIXME: do we need a pll semaphore? */ |
| dvb->fe[0]->sec_priv = dvb; |
| sema_init(&dvb->pll_mutex, 1); |
| dvb->gate_ctrl = dvb->fe[0]->ops.i2c_gate_ctrl; |
| dvb->fe[0]->ops.i2c_gate_ctrl = drxk_gate_ctrl; |
| |
| /* Attach tda18271 to DVB-C frontend */ |
| if (dvb->fe[0]->ops.i2c_gate_ctrl) |
| dvb->fe[0]->ops.i2c_gate_ctrl(dvb->fe[0], 1); |
| if (!dvb_attach(tda18271c2dd_attach, dvb->fe[0], |
| &dev->i2c_adap[dev->def_i2c_bus], 0x60)) { |
| result = -EINVAL; |
| goto out_free; |
| } |
| if (dvb->fe[0]->ops.i2c_gate_ctrl) |
| dvb->fe[0]->ops.i2c_gate_ctrl(dvb->fe[0], 0); |
| |
| break; |
| case EM2884_BOARD_C3TECH_DIGITAL_DUO: |
| dvb->fe[0] = dvb_attach(mb86a20s_attach, |
| &c3tech_duo_mb86a20s_config, |
| &dev->i2c_adap[dev->def_i2c_bus]); |
| if (dvb->fe[0]) |
| dvb_attach(tda18271_attach, dvb->fe[0], 0x60, |
| &dev->i2c_adap[dev->def_i2c_bus], |
| &c3tech_duo_tda18271_config); |
| break; |
| case EM28174_BOARD_PCTV_460E: |
| result = em28174_dvb_init_pctv_460e(dev); |
| if (result) |
| goto out_free; |
| break; |
| case EM2874_BOARD_DELOCK_61959: |
| case EM2874_BOARD_MAXMEDIA_UB425_TC: |
| /* attach demodulator */ |
| dvb->fe[0] = dvb_attach(drxk_attach, &maxmedia_ub425_tc_drxk, |
| &dev->i2c_adap[dev->def_i2c_bus]); |
| |
| if (dvb->fe[0]) { |
| /* disable I2C-gate */ |
| dvb->fe[0]->ops.i2c_gate_ctrl = NULL; |
| |
| /* attach tuner */ |
| if (!dvb_attach(tda18271_attach, dvb->fe[0], 0x60, |
| &dev->i2c_adap[dev->def_i2c_bus], |
| &em28xx_cxd2820r_tda18271_config)) { |
| dvb_frontend_detach(dvb->fe[0]); |
| result = -EINVAL; |
| goto out_free; |
| } |
| } |
| break; |
| case EM2884_BOARD_PCTV_510E: |
| case EM2884_BOARD_PCTV_520E: |
| pctv_520e_init(dev); |
| |
| /* attach demodulator */ |
| dvb->fe[0] = dvb_attach(drxk_attach, &pctv_520e_drxk, |
| &dev->i2c_adap[dev->def_i2c_bus]); |
| |
| if (dvb->fe[0]) { |
| /* attach tuner */ |
| if (!dvb_attach(tda18271_attach, dvb->fe[0], 0x60, |
| &dev->i2c_adap[dev->def_i2c_bus], |
| &em28xx_cxd2820r_tda18271_config)) { |
| dvb_frontend_detach(dvb->fe[0]); |
| result = -EINVAL; |
| goto out_free; |
| } |
| } |
| break; |
| case EM2884_BOARD_ELGATO_EYETV_HYBRID_2008: |
| case EM2884_BOARD_CINERGY_HTC_STICK: |
| case EM2884_BOARD_TERRATEC_H6: |
| terratec_htc_stick_init(dev); |
| |
| /* attach demodulator */ |
| dvb->fe[0] = dvb_attach(drxk_attach, &terratec_htc_stick_drxk, |
| &dev->i2c_adap[dev->def_i2c_bus]); |
| if (!dvb->fe[0]) { |
| result = -EINVAL; |
| goto out_free; |
| } |
| |
| /* Attach the demodulator. */ |
| if (!dvb_attach(tda18271_attach, dvb->fe[0], 0x60, |
| &dev->i2c_adap[dev->def_i2c_bus], |
| &em28xx_cxd2820r_tda18271_config)) { |
| result = -EINVAL; |
| goto out_free; |
| } |
| break; |
| case EM2884_BOARD_TERRATEC_HTC_USB_XS: |
| terratec_htc_usb_xs_init(dev); |
| |
| /* attach demodulator */ |
| dvb->fe[0] = dvb_attach(drxk_attach, &terratec_htc_stick_drxk, |
| &dev->i2c_adap[dev->def_i2c_bus]); |
| if (!dvb->fe[0]) { |
| result = -EINVAL; |
| goto out_free; |
| } |
| |
| /* Attach the demodulator. */ |
| if (!dvb_attach(tda18271_attach, dvb->fe[0], 0x60, |
| &dev->i2c_adap[dev->def_i2c_bus], |
| &em28xx_cxd2820r_tda18271_config)) { |
| result = -EINVAL; |
| goto out_free; |
| } |
| break; |
| case EM2874_BOARD_KWORLD_UB435Q_V2: |
| dvb->fe[0] = dvb_attach(lgdt3305_attach, |
| &em2874_lgdt3305_dev, |
| &dev->i2c_adap[dev->def_i2c_bus]); |
| if (!dvb->fe[0]) { |
| result = -EINVAL; |
| goto out_free; |
| } |
| |
| /* Attach the demodulator. */ |
| if (!dvb_attach(tda18271_attach, dvb->fe[0], 0x60, |
| &dev->i2c_adap[dev->def_i2c_bus], |
| &kworld_ub435q_v2_config)) { |
| result = -EINVAL; |
| goto out_free; |
| } |
| break; |
| case EM2874_BOARD_KWORLD_UB435Q_V3: |
| { |
| struct i2c_adapter *adapter = &dev->i2c_adap[dev->def_i2c_bus]; |
| |
| dvb->fe[0] = dvb_attach(lgdt3305_attach, |
| &em2874_lgdt3305_nogate_dev, |
| &dev->i2c_adap[dev->def_i2c_bus]); |
| if (!dvb->fe[0]) { |
| result = -EINVAL; |
| goto out_free; |
| } |
| |
| /* attach tuner */ |
| kworld_ub435q_v3_config.fe = dvb->fe[0]; |
| |
| dvb->i2c_client_tuner = dvb_module_probe("tda18212", NULL, |
| adapter, 0x60, |
| &kworld_ub435q_v3_config); |
| if (!dvb->i2c_client_tuner) { |
| dvb_frontend_detach(dvb->fe[0]); |
| result = -ENODEV; |
| goto out_free; |
| } |
| break; |
| } |
| case EM2874_BOARD_PCTV_HD_MINI_80E: |
| dvb->fe[0] = dvb_attach(drx39xxj_attach, |
| &dev->i2c_adap[dev->def_i2c_bus]); |
| if (dvb->fe[0]) { |
| dvb->fe[0] = dvb_attach(tda18271_attach, dvb->fe[0], |
| 0x60, |
| &dev->i2c_adap[dev->def_i2c_bus], |
| &pinnacle_80e_dvb_config); |
| if (!dvb->fe[0]) { |
| result = -EINVAL; |
| goto out_free; |
| } |
| } |
| break; |
| case EM28178_BOARD_PCTV_461E: |
| result = em28178_dvb_init_pctv_461e(dev); |
| if (result) |
| goto out_free; |
| break; |
| case EM28178_BOARD_PCTV_292E: |
| result = em28178_dvb_init_pctv_292e(dev); |
| if (result) |
| goto out_free; |
| break; |
| case EM28178_BOARD_TERRATEC_T2_STICK_HD: |
| result = em28178_dvb_init_terratec_t2_stick_hd(dev); |
| if (result) |
| goto out_free; |
| break; |
| case EM28178_BOARD_PLEX_PX_BCUD: |
| result = em28178_dvb_init_plex_px_bcud(dev); |
| if (result) |
| goto out_free; |
| break; |
| case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_DVB: |
| result = em28174_dvb_init_hauppauge_wintv_dualhd_dvb(dev); |
| if (result) |
| goto out_free; |
| break; |
| case EM28174_BOARD_HAUPPAUGE_WINTV_DUALHD_01595: |
| result = em28174_dvb_init_hauppauge_wintv_dualhd_01595(dev); |
| if (result) |
| goto out_free; |
| break; |
| default: |
| dev_err(&dev->intf->dev, |
| "The frontend of your DVB/ATSC card isn't supported yet\n"); |
| break; |
| } |
| if (!dvb->fe[0]) { |
| dev_err(&dev->intf->dev, "frontend initialization failed\n"); |
| result = -EINVAL; |
| goto out_free; |
| } |
| /* define general-purpose callback pointer */ |
| dvb->fe[0]->callback = em28xx_tuner_callback; |
| if (dvb->fe[1]) |
| dvb->fe[1]->callback = em28xx_tuner_callback; |
| |
| /* register everything */ |
| result = em28xx_register_dvb(dvb, THIS_MODULE, dev, &dev->intf->dev); |
| |
| if (result < 0) |
| goto out_free; |
| |
| if (dev->dvb_xfer_bulk) { |
| dvb_alt = 0; |
| } else { /* isoc */ |
| dvb_alt = dev->dvb_alt_isoc; |
| } |
| |
| udev = interface_to_usbdev(dev->intf); |
| usb_set_interface(udev, dev->ifnum, dvb_alt); |
| dev_info(&dev->intf->dev, "DVB extension successfully initialized\n"); |
| |
| kref_get(&dev->ref); |
| |
| ret: |
| em28xx_set_mode(dev, EM28XX_SUSPEND); |
| mutex_unlock(&dev->lock); |
| return result; |
| |
| out_free: |
| kfree(dvb); |
| dev->dvb = NULL; |
| goto ret; |
| } |
| |
| static inline void prevent_sleep(struct dvb_frontend_ops *ops) |
| { |
| ops->set_voltage = NULL; |
| ops->sleep = NULL; |
| ops->tuner_ops.sleep = NULL; |
| } |
| |
| static int em28xx_dvb_fini(struct em28xx *dev) |
| { |
| struct em28xx_dvb *dvb; |
| |
| if (dev->is_audio_only) { |
| /* Shouldn't initialize IR for this interface */ |
| return 0; |
| } |
| |
| if (!dev->board.has_dvb) { |
| /* This device does not support the extension */ |
| return 0; |
| } |
| |
| if (!dev->dvb) |
| return 0; |
| |
| dev_info(&dev->intf->dev, "Closing DVB extension\n"); |
| |
| dvb = dev->dvb; |
| |
| em28xx_uninit_usb_xfer(dev, EM28XX_DIGITAL_MODE); |
| |
| if (dev->disconnected) { |
| /* |
| * We cannot tell the device to sleep |
| * once it has been unplugged. |
| */ |
| if (dvb->fe[0]) { |
| prevent_sleep(&dvb->fe[0]->ops); |
| dvb->fe[0]->exit = DVB_FE_DEVICE_REMOVED; |
| } |
| if (dvb->fe[1]) { |
| prevent_sleep(&dvb->fe[1]->ops); |
| dvb->fe[1]->exit = DVB_FE_DEVICE_REMOVED; |
| } |
| } |
| |
| em28xx_unregister_dvb(dvb); |
| |
| /* release I2C module bindings */ |
| dvb_module_release(dvb->i2c_client_sec); |
| dvb_module_release(dvb->i2c_client_tuner); |
| dvb_module_release(dvb->i2c_client_demod); |
| |
| kfree(dvb); |
| dev->dvb = NULL; |
| kref_put(&dev->ref, em28xx_free_device); |
| |
| return 0; |
| } |
| |
| static int em28xx_dvb_suspend(struct em28xx *dev) |
| { |
| int ret = 0; |
| |
| if (dev->is_audio_only) |
| return 0; |
| |
| if (!dev->board.has_dvb) |
| return 0; |
| |
| dev_info(&dev->intf->dev, "Suspending DVB extension\n"); |
| if (dev->dvb) { |
| struct em28xx_dvb *dvb = dev->dvb; |
| |
| if (dvb->fe[0]) { |
| ret = dvb_frontend_suspend(dvb->fe[0]); |
| dev_info(&dev->intf->dev, "fe0 suspend %d\n", ret); |
| } |
| if (dvb->fe[1]) { |
| dvb_frontend_suspend(dvb->fe[1]); |
| dev_info(&dev->intf->dev, "fe1 suspend %d\n", ret); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int em28xx_dvb_resume(struct em28xx *dev) |
| { |
| int ret = 0; |
| |
| if (dev->is_audio_only) |
| return 0; |
| |
| if (!dev->board.has_dvb) |
| return 0; |
| |
| dev_info(&dev->intf->dev, "Resuming DVB extension\n"); |
| if (dev->dvb) { |
| struct em28xx_dvb *dvb = dev->dvb; |
| |
| if (dvb->fe[0]) { |
| ret = dvb_frontend_resume(dvb->fe[0]); |
| dev_info(&dev->intf->dev, "fe0 resume %d\n", ret); |
| } |
| |
| if (dvb->fe[1]) { |
| ret = dvb_frontend_resume(dvb->fe[1]); |
| dev_info(&dev->intf->dev, "fe1 resume %d\n", ret); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static struct em28xx_ops dvb_ops = { |
| .id = EM28XX_DVB, |
| .name = "Em28xx dvb Extension", |
| .init = em28xx_dvb_init, |
| .fini = em28xx_dvb_fini, |
| .suspend = em28xx_dvb_suspend, |
| .resume = em28xx_dvb_resume, |
| }; |
| |
| static int __init em28xx_dvb_register(void) |
| { |
| return em28xx_register_extension(&dvb_ops); |
| } |
| |
| static void __exit em28xx_dvb_unregister(void) |
| { |
| em28xx_unregister_extension(&dvb_ops); |
| } |
| |
| module_init(em28xx_dvb_register); |
| module_exit(em28xx_dvb_unregister); |