| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Battery driver for 7th-generation Microsoft Surface devices via Surface |
| * System Aggregator Module (SSAM). |
| * |
| * Copyright (C) 2019-2021 Maximilian Luz <luzmaximilian@gmail.com> |
| */ |
| |
| #include <asm/unaligned.h> |
| #include <linux/jiffies.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/power_supply.h> |
| #include <linux/sysfs.h> |
| #include <linux/types.h> |
| #include <linux/workqueue.h> |
| |
| #include <linux/surface_aggregator/device.h> |
| |
| |
| /* -- SAM interface. -------------------------------------------------------- */ |
| |
| enum sam_event_cid_bat { |
| SAM_EVENT_CID_BAT_BIX = 0x15, |
| SAM_EVENT_CID_BAT_BST = 0x16, |
| SAM_EVENT_CID_BAT_ADP = 0x17, |
| SAM_EVENT_CID_BAT_PROT = 0x18, |
| SAM_EVENT_CID_BAT_DPTF = 0x53, |
| }; |
| |
| enum sam_battery_sta { |
| SAM_BATTERY_STA_OK = 0x0f, |
| SAM_BATTERY_STA_PRESENT = 0x10, |
| }; |
| |
| enum sam_battery_state { |
| SAM_BATTERY_STATE_DISCHARGING = BIT(0), |
| SAM_BATTERY_STATE_CHARGING = BIT(1), |
| SAM_BATTERY_STATE_CRITICAL = BIT(2), |
| }; |
| |
| enum sam_battery_power_unit { |
| SAM_BATTERY_POWER_UNIT_mW = 0, |
| SAM_BATTERY_POWER_UNIT_mA = 1, |
| }; |
| |
| /* Equivalent to data returned in ACPI _BIX method, revision 0. */ |
| struct spwr_bix { |
| u8 revision; |
| __le32 power_unit; |
| __le32 design_cap; |
| __le32 last_full_charge_cap; |
| __le32 technology; |
| __le32 design_voltage; |
| __le32 design_cap_warn; |
| __le32 design_cap_low; |
| __le32 cycle_count; |
| __le32 measurement_accuracy; |
| __le32 max_sampling_time; |
| __le32 min_sampling_time; |
| __le32 max_avg_interval; |
| __le32 min_avg_interval; |
| __le32 bat_cap_granularity_1; |
| __le32 bat_cap_granularity_2; |
| __u8 model[21]; |
| __u8 serial[11]; |
| __u8 type[5]; |
| __u8 oem_info[21]; |
| } __packed; |
| |
| static_assert(sizeof(struct spwr_bix) == 119); |
| |
| /* Equivalent to data returned in ACPI _BST method. */ |
| struct spwr_bst { |
| __le32 state; |
| __le32 present_rate; |
| __le32 remaining_cap; |
| __le32 present_voltage; |
| } __packed; |
| |
| static_assert(sizeof(struct spwr_bst) == 16); |
| |
| #define SPWR_BIX_REVISION 0 |
| #define SPWR_BATTERY_VALUE_UNKNOWN 0xffffffff |
| |
| /* Get battery status (_STA) */ |
| SSAM_DEFINE_SYNC_REQUEST_CL_R(ssam_bat_get_sta, __le32, { |
| .target_category = SSAM_SSH_TC_BAT, |
| .command_id = 0x01, |
| }); |
| |
| /* Get battery static information (_BIX). */ |
| SSAM_DEFINE_SYNC_REQUEST_CL_R(ssam_bat_get_bix, struct spwr_bix, { |
| .target_category = SSAM_SSH_TC_BAT, |
| .command_id = 0x02, |
| }); |
| |
| /* Get battery dynamic information (_BST). */ |
| SSAM_DEFINE_SYNC_REQUEST_CL_R(ssam_bat_get_bst, struct spwr_bst, { |
| .target_category = SSAM_SSH_TC_BAT, |
| .command_id = 0x03, |
| }); |
| |
| /* Set battery trip point (_BTP). */ |
| SSAM_DEFINE_SYNC_REQUEST_CL_W(ssam_bat_set_btp, __le32, { |
| .target_category = SSAM_SSH_TC_BAT, |
| .command_id = 0x04, |
| }); |
| |
| |
| /* -- Device structures. ---------------------------------------------------- */ |
| |
| struct spwr_psy_properties { |
| const char *name; |
| struct ssam_event_registry registry; |
| }; |
| |
| struct spwr_battery_device { |
| struct ssam_device *sdev; |
| |
| char name[32]; |
| struct power_supply *psy; |
| struct power_supply_desc psy_desc; |
| |
| struct delayed_work update_work; |
| |
| struct ssam_event_notifier notif; |
| |
| struct mutex lock; /* Guards access to state data below. */ |
| unsigned long timestamp; |
| |
| __le32 sta; |
| struct spwr_bix bix; |
| struct spwr_bst bst; |
| u32 alarm; |
| }; |
| |
| |
| /* -- Module parameters. ---------------------------------------------------- */ |
| |
| static unsigned int cache_time = 1000; |
| module_param(cache_time, uint, 0644); |
| MODULE_PARM_DESC(cache_time, "battery state caching time in milliseconds [default: 1000]"); |
| |
| |
| /* -- State management. ----------------------------------------------------- */ |
| |
| /* |
| * Delay for battery update quirk. See spwr_external_power_changed() below |
| * for more details. |
| */ |
| #define SPWR_AC_BAT_UPDATE_DELAY msecs_to_jiffies(5000) |
| |
| static bool spwr_battery_present(struct spwr_battery_device *bat) |
| { |
| lockdep_assert_held(&bat->lock); |
| |
| return le32_to_cpu(bat->sta) & SAM_BATTERY_STA_PRESENT; |
| } |
| |
| static int spwr_battery_load_sta(struct spwr_battery_device *bat) |
| { |
| lockdep_assert_held(&bat->lock); |
| |
| return ssam_retry(ssam_bat_get_sta, bat->sdev, &bat->sta); |
| } |
| |
| static int spwr_battery_load_bix(struct spwr_battery_device *bat) |
| { |
| int status; |
| |
| lockdep_assert_held(&bat->lock); |
| |
| if (!spwr_battery_present(bat)) |
| return 0; |
| |
| status = ssam_retry(ssam_bat_get_bix, bat->sdev, &bat->bix); |
| |
| /* Enforce NULL terminated strings in case anything goes wrong... */ |
| bat->bix.model[ARRAY_SIZE(bat->bix.model) - 1] = 0; |
| bat->bix.serial[ARRAY_SIZE(bat->bix.serial) - 1] = 0; |
| bat->bix.type[ARRAY_SIZE(bat->bix.type) - 1] = 0; |
| bat->bix.oem_info[ARRAY_SIZE(bat->bix.oem_info) - 1] = 0; |
| |
| return status; |
| } |
| |
| static int spwr_battery_load_bst(struct spwr_battery_device *bat) |
| { |
| lockdep_assert_held(&bat->lock); |
| |
| if (!spwr_battery_present(bat)) |
| return 0; |
| |
| return ssam_retry(ssam_bat_get_bst, bat->sdev, &bat->bst); |
| } |
| |
| static int spwr_battery_set_alarm_unlocked(struct spwr_battery_device *bat, u32 value) |
| { |
| __le32 value_le = cpu_to_le32(value); |
| |
| lockdep_assert_held(&bat->lock); |
| |
| bat->alarm = value; |
| return ssam_retry(ssam_bat_set_btp, bat->sdev, &value_le); |
| } |
| |
| static int spwr_battery_update_bst_unlocked(struct spwr_battery_device *bat, bool cached) |
| { |
| unsigned long cache_deadline = bat->timestamp + msecs_to_jiffies(cache_time); |
| int status; |
| |
| lockdep_assert_held(&bat->lock); |
| |
| if (cached && bat->timestamp && time_is_after_jiffies(cache_deadline)) |
| return 0; |
| |
| status = spwr_battery_load_sta(bat); |
| if (status) |
| return status; |
| |
| status = spwr_battery_load_bst(bat); |
| if (status) |
| return status; |
| |
| bat->timestamp = jiffies; |
| return 0; |
| } |
| |
| static int spwr_battery_update_bst(struct spwr_battery_device *bat, bool cached) |
| { |
| int status; |
| |
| mutex_lock(&bat->lock); |
| status = spwr_battery_update_bst_unlocked(bat, cached); |
| mutex_unlock(&bat->lock); |
| |
| return status; |
| } |
| |
| static int spwr_battery_update_bix_unlocked(struct spwr_battery_device *bat) |
| { |
| int status; |
| |
| lockdep_assert_held(&bat->lock); |
| |
| status = spwr_battery_load_sta(bat); |
| if (status) |
| return status; |
| |
| status = spwr_battery_load_bix(bat); |
| if (status) |
| return status; |
| |
| status = spwr_battery_load_bst(bat); |
| if (status) |
| return status; |
| |
| if (bat->bix.revision != SPWR_BIX_REVISION) |
| dev_warn(&bat->sdev->dev, "unsupported battery revision: %u\n", bat->bix.revision); |
| |
| bat->timestamp = jiffies; |
| return 0; |
| } |
| |
| static u32 sprw_battery_get_full_cap_safe(struct spwr_battery_device *bat) |
| { |
| u32 full_cap = get_unaligned_le32(&bat->bix.last_full_charge_cap); |
| |
| lockdep_assert_held(&bat->lock); |
| |
| if (full_cap == 0 || full_cap == SPWR_BATTERY_VALUE_UNKNOWN) |
| full_cap = get_unaligned_le32(&bat->bix.design_cap); |
| |
| return full_cap; |
| } |
| |
| static bool spwr_battery_is_full(struct spwr_battery_device *bat) |
| { |
| u32 state = get_unaligned_le32(&bat->bst.state); |
| u32 full_cap = sprw_battery_get_full_cap_safe(bat); |
| u32 remaining_cap = get_unaligned_le32(&bat->bst.remaining_cap); |
| |
| lockdep_assert_held(&bat->lock); |
| |
| return full_cap != SPWR_BATTERY_VALUE_UNKNOWN && full_cap != 0 && |
| remaining_cap != SPWR_BATTERY_VALUE_UNKNOWN && |
| remaining_cap >= full_cap && |
| state == 0; |
| } |
| |
| static int spwr_battery_recheck_full(struct spwr_battery_device *bat) |
| { |
| bool present; |
| u32 unit; |
| int status; |
| |
| mutex_lock(&bat->lock); |
| unit = get_unaligned_le32(&bat->bix.power_unit); |
| present = spwr_battery_present(bat); |
| |
| status = spwr_battery_update_bix_unlocked(bat); |
| if (status) |
| goto out; |
| |
| /* If battery has been attached, (re-)initialize alarm. */ |
| if (!present && spwr_battery_present(bat)) { |
| u32 cap_warn = get_unaligned_le32(&bat->bix.design_cap_warn); |
| |
| status = spwr_battery_set_alarm_unlocked(bat, cap_warn); |
| if (status) |
| goto out; |
| } |
| |
| /* |
| * Warn if the unit has changed. This is something we genuinely don't |
| * expect to happen, so make this a big warning. If it does, we'll |
| * need to add support for it. |
| */ |
| WARN_ON(unit != get_unaligned_le32(&bat->bix.power_unit)); |
| |
| out: |
| mutex_unlock(&bat->lock); |
| |
| if (!status) |
| power_supply_changed(bat->psy); |
| |
| return status; |
| } |
| |
| static int spwr_battery_recheck_status(struct spwr_battery_device *bat) |
| { |
| int status; |
| |
| status = spwr_battery_update_bst(bat, false); |
| if (!status) |
| power_supply_changed(bat->psy); |
| |
| return status; |
| } |
| |
| static u32 spwr_notify_bat(struct ssam_event_notifier *nf, const struct ssam_event *event) |
| { |
| struct spwr_battery_device *bat = container_of(nf, struct spwr_battery_device, notif); |
| int status; |
| |
| /* |
| * We cannot use strict matching when registering the notifier as the |
| * EC expects us to register it against instance ID 0. Strict matching |
| * would thus drop events, as those may have non-zero instance IDs in |
| * this subsystem. So we need to check the instance ID of the event |
| * here manually. |
| */ |
| if (event->instance_id != bat->sdev->uid.instance) |
| return 0; |
| |
| dev_dbg(&bat->sdev->dev, "power event (cid = %#04x, iid = %#04x, tid = %#04x)\n", |
| event->command_id, event->instance_id, event->target_id); |
| |
| switch (event->command_id) { |
| case SAM_EVENT_CID_BAT_BIX: |
| status = spwr_battery_recheck_full(bat); |
| break; |
| |
| case SAM_EVENT_CID_BAT_BST: |
| status = spwr_battery_recheck_status(bat); |
| break; |
| |
| case SAM_EVENT_CID_BAT_PROT: |
| /* |
| * TODO: Implement support for battery protection status change |
| * event. |
| */ |
| status = 0; |
| break; |
| |
| case SAM_EVENT_CID_BAT_DPTF: |
| /* |
| * TODO: Implement support for DPTF event. |
| */ |
| status = 0; |
| break; |
| |
| default: |
| return 0; |
| } |
| |
| return ssam_notifier_from_errno(status) | SSAM_NOTIF_HANDLED; |
| } |
| |
| static void spwr_battery_update_bst_workfn(struct work_struct *work) |
| { |
| struct delayed_work *dwork = to_delayed_work(work); |
| struct spwr_battery_device *bat; |
| int status; |
| |
| bat = container_of(dwork, struct spwr_battery_device, update_work); |
| |
| status = spwr_battery_update_bst(bat, false); |
| if (status) { |
| dev_err(&bat->sdev->dev, "failed to update battery state: %d\n", status); |
| return; |
| } |
| |
| power_supply_changed(bat->psy); |
| } |
| |
| static void spwr_external_power_changed(struct power_supply *psy) |
| { |
| struct spwr_battery_device *bat = power_supply_get_drvdata(psy); |
| |
| /* |
| * Handle battery update quirk: When the battery is fully charged (or |
| * charged up to the limit imposed by the UEFI battery limit) and the |
| * adapter is plugged in or removed, the EC does not send a separate |
| * event for the state (charging/discharging) change. Furthermore it |
| * may take some time until the state is updated on the battery. |
| * Schedule an update to solve this. |
| */ |
| |
| schedule_delayed_work(&bat->update_work, SPWR_AC_BAT_UPDATE_DELAY); |
| } |
| |
| |
| /* -- Properties. ----------------------------------------------------------- */ |
| |
| static const enum power_supply_property spwr_battery_props_chg[] = { |
| POWER_SUPPLY_PROP_STATUS, |
| POWER_SUPPLY_PROP_PRESENT, |
| POWER_SUPPLY_PROP_TECHNOLOGY, |
| POWER_SUPPLY_PROP_CYCLE_COUNT, |
| POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, |
| POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| POWER_SUPPLY_PROP_CURRENT_NOW, |
| POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, |
| POWER_SUPPLY_PROP_CHARGE_FULL, |
| POWER_SUPPLY_PROP_CHARGE_NOW, |
| POWER_SUPPLY_PROP_CAPACITY, |
| POWER_SUPPLY_PROP_CAPACITY_LEVEL, |
| POWER_SUPPLY_PROP_MODEL_NAME, |
| POWER_SUPPLY_PROP_MANUFACTURER, |
| POWER_SUPPLY_PROP_SERIAL_NUMBER, |
| }; |
| |
| static const enum power_supply_property spwr_battery_props_eng[] = { |
| POWER_SUPPLY_PROP_STATUS, |
| POWER_SUPPLY_PROP_PRESENT, |
| POWER_SUPPLY_PROP_TECHNOLOGY, |
| POWER_SUPPLY_PROP_CYCLE_COUNT, |
| POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, |
| POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| POWER_SUPPLY_PROP_POWER_NOW, |
| POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, |
| POWER_SUPPLY_PROP_ENERGY_FULL, |
| POWER_SUPPLY_PROP_ENERGY_NOW, |
| POWER_SUPPLY_PROP_CAPACITY, |
| POWER_SUPPLY_PROP_CAPACITY_LEVEL, |
| POWER_SUPPLY_PROP_MODEL_NAME, |
| POWER_SUPPLY_PROP_MANUFACTURER, |
| POWER_SUPPLY_PROP_SERIAL_NUMBER, |
| }; |
| |
| static int spwr_battery_prop_status(struct spwr_battery_device *bat) |
| { |
| u32 state = get_unaligned_le32(&bat->bst.state); |
| u32 present_rate = get_unaligned_le32(&bat->bst.present_rate); |
| |
| lockdep_assert_held(&bat->lock); |
| |
| if (state & SAM_BATTERY_STATE_DISCHARGING) |
| return POWER_SUPPLY_STATUS_DISCHARGING; |
| |
| if (state & SAM_BATTERY_STATE_CHARGING) |
| return POWER_SUPPLY_STATUS_CHARGING; |
| |
| if (spwr_battery_is_full(bat)) |
| return POWER_SUPPLY_STATUS_FULL; |
| |
| if (present_rate == 0) |
| return POWER_SUPPLY_STATUS_NOT_CHARGING; |
| |
| return POWER_SUPPLY_STATUS_UNKNOWN; |
| } |
| |
| static int spwr_battery_prop_technology(struct spwr_battery_device *bat) |
| { |
| lockdep_assert_held(&bat->lock); |
| |
| if (!strcasecmp("NiCd", bat->bix.type)) |
| return POWER_SUPPLY_TECHNOLOGY_NiCd; |
| |
| if (!strcasecmp("NiMH", bat->bix.type)) |
| return POWER_SUPPLY_TECHNOLOGY_NiMH; |
| |
| if (!strcasecmp("LION", bat->bix.type)) |
| return POWER_SUPPLY_TECHNOLOGY_LION; |
| |
| if (!strncasecmp("LI-ION", bat->bix.type, 6)) |
| return POWER_SUPPLY_TECHNOLOGY_LION; |
| |
| if (!strcasecmp("LiP", bat->bix.type)) |
| return POWER_SUPPLY_TECHNOLOGY_LIPO; |
| |
| return POWER_SUPPLY_TECHNOLOGY_UNKNOWN; |
| } |
| |
| static int spwr_battery_prop_capacity(struct spwr_battery_device *bat) |
| { |
| u32 full_cap = sprw_battery_get_full_cap_safe(bat); |
| u32 remaining_cap = get_unaligned_le32(&bat->bst.remaining_cap); |
| |
| lockdep_assert_held(&bat->lock); |
| |
| if (full_cap == 0 || full_cap == SPWR_BATTERY_VALUE_UNKNOWN) |
| return -ENODATA; |
| |
| if (remaining_cap == SPWR_BATTERY_VALUE_UNKNOWN) |
| return -ENODATA; |
| |
| return remaining_cap * 100 / full_cap; |
| } |
| |
| static int spwr_battery_prop_capacity_level(struct spwr_battery_device *bat) |
| { |
| u32 state = get_unaligned_le32(&bat->bst.state); |
| u32 remaining_cap = get_unaligned_le32(&bat->bst.remaining_cap); |
| |
| lockdep_assert_held(&bat->lock); |
| |
| if (state & SAM_BATTERY_STATE_CRITICAL) |
| return POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL; |
| |
| if (spwr_battery_is_full(bat)) |
| return POWER_SUPPLY_CAPACITY_LEVEL_FULL; |
| |
| if (remaining_cap <= bat->alarm) |
| return POWER_SUPPLY_CAPACITY_LEVEL_LOW; |
| |
| return POWER_SUPPLY_CAPACITY_LEVEL_NORMAL; |
| } |
| |
| static int spwr_battery_get_property(struct power_supply *psy, enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct spwr_battery_device *bat = power_supply_get_drvdata(psy); |
| u32 value; |
| int status; |
| |
| mutex_lock(&bat->lock); |
| |
| status = spwr_battery_update_bst_unlocked(bat, true); |
| if (status) |
| goto out; |
| |
| /* Abort if battery is not present. */ |
| if (!spwr_battery_present(bat) && psp != POWER_SUPPLY_PROP_PRESENT) { |
| status = -ENODEV; |
| goto out; |
| } |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_STATUS: |
| val->intval = spwr_battery_prop_status(bat); |
| break; |
| |
| case POWER_SUPPLY_PROP_PRESENT: |
| val->intval = spwr_battery_present(bat); |
| break; |
| |
| case POWER_SUPPLY_PROP_TECHNOLOGY: |
| val->intval = spwr_battery_prop_technology(bat); |
| break; |
| |
| case POWER_SUPPLY_PROP_CYCLE_COUNT: |
| value = get_unaligned_le32(&bat->bix.cycle_count); |
| if (value != SPWR_BATTERY_VALUE_UNKNOWN) |
| val->intval = value; |
| else |
| status = -ENODATA; |
| break; |
| |
| case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: |
| value = get_unaligned_le32(&bat->bix.design_voltage); |
| if (value != SPWR_BATTERY_VALUE_UNKNOWN) |
| val->intval = value * 1000; |
| else |
| status = -ENODATA; |
| break; |
| |
| case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| value = get_unaligned_le32(&bat->bst.present_voltage); |
| if (value != SPWR_BATTERY_VALUE_UNKNOWN) |
| val->intval = value * 1000; |
| else |
| status = -ENODATA; |
| break; |
| |
| case POWER_SUPPLY_PROP_CURRENT_NOW: |
| case POWER_SUPPLY_PROP_POWER_NOW: |
| value = get_unaligned_le32(&bat->bst.present_rate); |
| if (value != SPWR_BATTERY_VALUE_UNKNOWN) |
| val->intval = value * 1000; |
| else |
| status = -ENODATA; |
| break; |
| |
| case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: |
| case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN: |
| value = get_unaligned_le32(&bat->bix.design_cap); |
| if (value != SPWR_BATTERY_VALUE_UNKNOWN) |
| val->intval = value * 1000; |
| else |
| status = -ENODATA; |
| break; |
| |
| case POWER_SUPPLY_PROP_CHARGE_FULL: |
| case POWER_SUPPLY_PROP_ENERGY_FULL: |
| value = get_unaligned_le32(&bat->bix.last_full_charge_cap); |
| if (value != SPWR_BATTERY_VALUE_UNKNOWN) |
| val->intval = value * 1000; |
| else |
| status = -ENODATA; |
| break; |
| |
| case POWER_SUPPLY_PROP_CHARGE_NOW: |
| case POWER_SUPPLY_PROP_ENERGY_NOW: |
| value = get_unaligned_le32(&bat->bst.remaining_cap); |
| if (value != SPWR_BATTERY_VALUE_UNKNOWN) |
| val->intval = value * 1000; |
| else |
| status = -ENODATA; |
| break; |
| |
| case POWER_SUPPLY_PROP_CAPACITY: |
| val->intval = spwr_battery_prop_capacity(bat); |
| break; |
| |
| case POWER_SUPPLY_PROP_CAPACITY_LEVEL: |
| val->intval = spwr_battery_prop_capacity_level(bat); |
| break; |
| |
| case POWER_SUPPLY_PROP_MODEL_NAME: |
| val->strval = bat->bix.model; |
| break; |
| |
| case POWER_SUPPLY_PROP_MANUFACTURER: |
| val->strval = bat->bix.oem_info; |
| break; |
| |
| case POWER_SUPPLY_PROP_SERIAL_NUMBER: |
| val->strval = bat->bix.serial; |
| break; |
| |
| default: |
| status = -EINVAL; |
| break; |
| } |
| |
| out: |
| mutex_unlock(&bat->lock); |
| return status; |
| } |
| |
| |
| /* -- Alarm attribute. ------------------------------------------------------ */ |
| |
| static ssize_t alarm_show(struct device *dev, struct device_attribute *attr, char *buf) |
| { |
| struct power_supply *psy = dev_get_drvdata(dev); |
| struct spwr_battery_device *bat = power_supply_get_drvdata(psy); |
| int status; |
| |
| mutex_lock(&bat->lock); |
| status = sysfs_emit(buf, "%d\n", bat->alarm * 1000); |
| mutex_unlock(&bat->lock); |
| |
| return status; |
| } |
| |
| static ssize_t alarm_store(struct device *dev, struct device_attribute *attr, const char *buf, |
| size_t count) |
| { |
| struct power_supply *psy = dev_get_drvdata(dev); |
| struct spwr_battery_device *bat = power_supply_get_drvdata(psy); |
| unsigned long value; |
| int status; |
| |
| status = kstrtoul(buf, 0, &value); |
| if (status) |
| return status; |
| |
| mutex_lock(&bat->lock); |
| |
| if (!spwr_battery_present(bat)) { |
| mutex_unlock(&bat->lock); |
| return -ENODEV; |
| } |
| |
| status = spwr_battery_set_alarm_unlocked(bat, value / 1000); |
| if (status) { |
| mutex_unlock(&bat->lock); |
| return status; |
| } |
| |
| mutex_unlock(&bat->lock); |
| return count; |
| } |
| |
| static DEVICE_ATTR_RW(alarm); |
| |
| static struct attribute *spwr_battery_attrs[] = { |
| &dev_attr_alarm.attr, |
| NULL, |
| }; |
| ATTRIBUTE_GROUPS(spwr_battery); |
| |
| |
| /* -- Device setup. --------------------------------------------------------- */ |
| |
| static void spwr_battery_init(struct spwr_battery_device *bat, struct ssam_device *sdev, |
| struct ssam_event_registry registry, const char *name) |
| { |
| mutex_init(&bat->lock); |
| strncpy(bat->name, name, ARRAY_SIZE(bat->name) - 1); |
| |
| bat->sdev = sdev; |
| |
| bat->notif.base.priority = 1; |
| bat->notif.base.fn = spwr_notify_bat; |
| bat->notif.event.reg = registry; |
| bat->notif.event.id.target_category = sdev->uid.category; |
| bat->notif.event.id.instance = 0; /* need to register with instance 0 */ |
| bat->notif.event.mask = SSAM_EVENT_MASK_TARGET; |
| bat->notif.event.flags = SSAM_EVENT_SEQUENCED; |
| |
| bat->psy_desc.name = bat->name; |
| bat->psy_desc.type = POWER_SUPPLY_TYPE_BATTERY; |
| bat->psy_desc.get_property = spwr_battery_get_property; |
| |
| INIT_DELAYED_WORK(&bat->update_work, spwr_battery_update_bst_workfn); |
| } |
| |
| static int spwr_battery_register(struct spwr_battery_device *bat) |
| { |
| struct power_supply_config psy_cfg = {}; |
| __le32 sta; |
| int status; |
| |
| /* Make sure the device is there and functioning properly. */ |
| status = ssam_retry(ssam_bat_get_sta, bat->sdev, &sta); |
| if (status) |
| return status; |
| |
| if ((le32_to_cpu(sta) & SAM_BATTERY_STA_OK) != SAM_BATTERY_STA_OK) |
| return -ENODEV; |
| |
| /* Satisfy lockdep although we are in an exclusive context here. */ |
| mutex_lock(&bat->lock); |
| |
| status = spwr_battery_update_bix_unlocked(bat); |
| if (status) { |
| mutex_unlock(&bat->lock); |
| return status; |
| } |
| |
| if (spwr_battery_present(bat)) { |
| u32 cap_warn = get_unaligned_le32(&bat->bix.design_cap_warn); |
| |
| status = spwr_battery_set_alarm_unlocked(bat, cap_warn); |
| if (status) { |
| mutex_unlock(&bat->lock); |
| return status; |
| } |
| } |
| |
| mutex_unlock(&bat->lock); |
| |
| bat->psy_desc.external_power_changed = spwr_external_power_changed; |
| |
| switch (get_unaligned_le32(&bat->bix.power_unit)) { |
| case SAM_BATTERY_POWER_UNIT_mW: |
| bat->psy_desc.properties = spwr_battery_props_eng; |
| bat->psy_desc.num_properties = ARRAY_SIZE(spwr_battery_props_eng); |
| break; |
| |
| case SAM_BATTERY_POWER_UNIT_mA: |
| bat->psy_desc.properties = spwr_battery_props_chg; |
| bat->psy_desc.num_properties = ARRAY_SIZE(spwr_battery_props_chg); |
| break; |
| |
| default: |
| dev_err(&bat->sdev->dev, "unsupported battery power unit: %u\n", |
| get_unaligned_le32(&bat->bix.power_unit)); |
| return -EINVAL; |
| } |
| |
| psy_cfg.drv_data = bat; |
| psy_cfg.attr_grp = spwr_battery_groups; |
| |
| bat->psy = devm_power_supply_register(&bat->sdev->dev, &bat->psy_desc, &psy_cfg); |
| if (IS_ERR(bat->psy)) |
| return PTR_ERR(bat->psy); |
| |
| return ssam_device_notifier_register(bat->sdev, &bat->notif); |
| } |
| |
| |
| /* -- Driver setup. --------------------------------------------------------- */ |
| |
| static int __maybe_unused surface_battery_resume(struct device *dev) |
| { |
| return spwr_battery_recheck_full(dev_get_drvdata(dev)); |
| } |
| static SIMPLE_DEV_PM_OPS(surface_battery_pm_ops, NULL, surface_battery_resume); |
| |
| static int surface_battery_probe(struct ssam_device *sdev) |
| { |
| const struct spwr_psy_properties *p; |
| struct spwr_battery_device *bat; |
| |
| p = ssam_device_get_match_data(sdev); |
| if (!p) |
| return -ENODEV; |
| |
| bat = devm_kzalloc(&sdev->dev, sizeof(*bat), GFP_KERNEL); |
| if (!bat) |
| return -ENOMEM; |
| |
| spwr_battery_init(bat, sdev, p->registry, p->name); |
| ssam_device_set_drvdata(sdev, bat); |
| |
| return spwr_battery_register(bat); |
| } |
| |
| static void surface_battery_remove(struct ssam_device *sdev) |
| { |
| struct spwr_battery_device *bat = ssam_device_get_drvdata(sdev); |
| |
| ssam_device_notifier_unregister(sdev, &bat->notif); |
| cancel_delayed_work_sync(&bat->update_work); |
| } |
| |
| static const struct spwr_psy_properties spwr_psy_props_bat1 = { |
| .name = "BAT1", |
| .registry = SSAM_EVENT_REGISTRY_SAM, |
| }; |
| |
| static const struct spwr_psy_properties spwr_psy_props_bat2_sb3 = { |
| .name = "BAT2", |
| .registry = SSAM_EVENT_REGISTRY_KIP, |
| }; |
| |
| static const struct ssam_device_id surface_battery_match[] = { |
| { SSAM_SDEV(BAT, 0x01, 0x01, 0x00), (unsigned long)&spwr_psy_props_bat1 }, |
| { SSAM_SDEV(BAT, 0x02, 0x01, 0x00), (unsigned long)&spwr_psy_props_bat2_sb3 }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(ssam, surface_battery_match); |
| |
| static struct ssam_device_driver surface_battery_driver = { |
| .probe = surface_battery_probe, |
| .remove = surface_battery_remove, |
| .match_table = surface_battery_match, |
| .driver = { |
| .name = "surface_battery", |
| .pm = &surface_battery_pm_ops, |
| .probe_type = PROBE_PREFER_ASYNCHRONOUS, |
| }, |
| }; |
| module_ssam_device_driver(surface_battery_driver); |
| |
| MODULE_AUTHOR("Maximilian Luz <luzmaximilian@gmail.com>"); |
| MODULE_DESCRIPTION("Battery driver for Surface System Aggregator Module"); |
| MODULE_LICENSE("GPL"); |