| // SPDX-License-Identifier: MIT |
| /* |
| * Copyright © 2023 Intel Corporation |
| */ |
| |
| #include "intel_display_params.h" |
| #include "i915_drv.h" |
| |
| #define intel_display_param_named(name, T, perm, desc) \ |
| module_param_named(name, intel_display_modparams.name, T, perm); \ |
| MODULE_PARM_DESC(name, desc) |
| #define intel_display_param_named_unsafe(name, T, perm, desc) \ |
| module_param_named_unsafe(name, intel_display_modparams.name, T, perm); \ |
| MODULE_PARM_DESC(name, desc) |
| |
| static struct intel_display_params intel_display_modparams __read_mostly = { |
| #define MEMBER(T, member, value, ...) .member = (value), |
| INTEL_DISPLAY_PARAMS_FOR_EACH(MEMBER) |
| #undef MEMBER |
| }; |
| /* |
| * Note: As a rule, keep module parameter sysfs permissions read-only |
| * 0400. Runtime changes are only supported through i915 debugfs. |
| * |
| * For any exceptions requiring write access and runtime changes through module |
| * parameter sysfs, prevent debugfs file creation by setting the parameter's |
| * debugfs mode to 0. |
| */ |
| |
| intel_display_param_named_unsafe(vbt_firmware, charp, 0400, |
| "Load VBT from specified file under /lib/firmware"); |
| |
| intel_display_param_named_unsafe(lvds_channel_mode, int, 0400, |
| "Specify LVDS channel mode " |
| "(0=probe BIOS [default], 1=single-channel, 2=dual-channel)"); |
| |
| intel_display_param_named_unsafe(panel_use_ssc, int, 0400, |
| "Use Spread Spectrum Clock with panels [LVDS/eDP] " |
| "(default: auto from VBT)"); |
| |
| intel_display_param_named_unsafe(vbt_sdvo_panel_type, int, 0400, |
| "Override/Ignore selection of SDVO panel mode in the VBT " |
| "(-2=ignore, -1=auto [default], index in VBT BIOS table)"); |
| |
| intel_display_param_named_unsafe(enable_dc, int, 0400, |
| "Enable power-saving display C-states. " |
| "(-1=auto [default]; 0=disable; 1=up to DC5; 2=up to DC6; " |
| "3=up to DC5 with DC3CO; 4=up to DC6 with DC3CO)"); |
| |
| intel_display_param_named_unsafe(enable_dpt, bool, 0400, |
| "Enable display page table (DPT) (default: true)"); |
| |
| intel_display_param_named_unsafe(enable_sagv, bool, 0400, |
| "Enable system agent voltage/frequency scaling (SAGV) (default: true)"); |
| |
| intel_display_param_named_unsafe(disable_power_well, int, 0400, |
| "Disable display power wells when possible " |
| "(-1=auto [default], 0=power wells always on, 1=power wells disabled when possible)"); |
| |
| intel_display_param_named_unsafe(enable_ips, bool, 0400, "Enable IPS (default: true)"); |
| |
| intel_display_param_named_unsafe(invert_brightness, int, 0400, |
| "Invert backlight brightness " |
| "(-1 force normal, 0 machine defaults, 1 force inversion), please " |
| "report PCI device ID, subsystem vendor and subsystem device ID " |
| "to dri-devel@lists.freedesktop.org, if your machine needs it. " |
| "It will then be included in an upcoming module version."); |
| |
| /* WA to get away with the default setting in VBT for early platforms.Will be removed */ |
| intel_display_param_named_unsafe(edp_vswing, int, 0400, |
| "Ignore/Override vswing pre-emph table selection from VBT " |
| "(0=use value from vbt [default], 1=low power swing(200mV)," |
| "2=default swing(400mV))"); |
| |
| intel_display_param_named(enable_dpcd_backlight, int, 0400, |
| "Enable support for DPCD backlight control" |
| "(-1=use per-VBT LFP backlight type setting [default], 0=disabled, 1=enable, 2=force VESA interface, 3=force Intel interface)"); |
| |
| intel_display_param_named_unsafe(load_detect_test, bool, 0400, |
| "Force-enable the VGA load detect code for testing (default:false). " |
| "For developers only."); |
| |
| intel_display_param_named_unsafe(force_reset_modeset_test, bool, 0400, |
| "Force a modeset during gpu reset for testing (default:false). " |
| "For developers only."); |
| |
| intel_display_param_named(disable_display, bool, 0400, |
| "Disable display (default: false)"); |
| |
| intel_display_param_named(verbose_state_checks, bool, 0400, |
| "Enable verbose logs (ie. WARN_ON()) in case of unexpected hw state conditions."); |
| |
| intel_display_param_named_unsafe(nuclear_pageflip, bool, 0400, |
| "Force enable atomic functionality on platforms that don't have full support yet."); |
| |
| intel_display_param_named_unsafe(enable_dp_mst, bool, 0400, |
| "Enable multi-stream transport (MST) for new DisplayPort sinks. (default: true)"); |
| |
| intel_display_param_named_unsafe(enable_fbc, int, 0400, |
| "Enable frame buffer compression for power savings " |
| "(default: -1 (use per-chip default))"); |
| |
| intel_display_param_named_unsafe(enable_psr, int, 0400, |
| "Enable PSR " |
| "(0=disabled, 1=enable up to PSR1, 2=enable up to PSR2) " |
| "Default: -1 (use per-chip default)"); |
| |
| intel_display_param_named(psr_safest_params, bool, 0400, |
| "Replace PSR VBT parameters by the safest and not optimal ones. This " |
| "is helpful to detect if PSR issues are related to bad values set in " |
| " VBT. (0=use VBT parameters, 1=use safest parameters)" |
| "Default: 0"); |
| |
| intel_display_param_named_unsafe(enable_psr2_sel_fetch, bool, 0400, |
| "Enable PSR2 selective fetch " |
| "(0=disabled, 1=enabled) " |
| "Default: 1"); |
| |
| __maybe_unused |
| static void _param_print_bool(struct drm_printer *p, const char *driver_name, |
| const char *name, bool val) |
| { |
| drm_printf(p, "%s.%s=%s\n", driver_name, name, str_yes_no(val)); |
| } |
| |
| __maybe_unused |
| static void _param_print_int(struct drm_printer *p, const char *driver_name, |
| const char *name, int val) |
| { |
| drm_printf(p, "%s.%s=%d\n", driver_name, name, val); |
| } |
| |
| __maybe_unused |
| static void _param_print_uint(struct drm_printer *p, const char *driver_name, |
| const char *name, unsigned int val) |
| { |
| drm_printf(p, "%s.%s=%u\n", driver_name, name, val); |
| } |
| |
| __maybe_unused |
| static void _param_print_ulong(struct drm_printer *p, const char *driver_name, |
| const char *name, unsigned long val) |
| { |
| drm_printf(p, "%s.%s=%lu\n", driver_name, name, val); |
| } |
| |
| __maybe_unused |
| static void _param_print_charp(struct drm_printer *p, const char *driver_name, |
| const char *name, const char *val) |
| { |
| drm_printf(p, "%s.%s=%s\n", driver_name, name, val); |
| } |
| |
| #define _param_print(p, driver_name, name, val) \ |
| _Generic(val, \ |
| bool : _param_print_bool, \ |
| int : _param_print_int, \ |
| unsigned int : _param_print_uint, \ |
| unsigned long : _param_print_ulong, \ |
| char * : _param_print_charp)(p, driver_name, name, val) |
| |
| /** |
| * intel_display_params_dump - dump intel display modparams |
| * @i915: i915 device |
| * @p: the &drm_printer |
| * |
| * Pretty printer for i915 modparams. |
| */ |
| void intel_display_params_dump(struct drm_i915_private *i915, struct drm_printer *p) |
| { |
| #define PRINT(T, x, ...) _param_print(p, i915->drm.driver->name, #x, i915->display.params.x); |
| INTEL_DISPLAY_PARAMS_FOR_EACH(PRINT); |
| #undef PRINT |
| } |
| |
| __maybe_unused static void _param_dup_charp(char **valp) |
| { |
| *valp = kstrdup(*valp ? *valp : "", GFP_ATOMIC); |
| } |
| |
| __maybe_unused static void _param_nop(void *valp) |
| { |
| } |
| |
| #define _param_dup(valp) \ |
| _Generic(valp, \ |
| char ** : _param_dup_charp, \ |
| default : _param_nop) \ |
| (valp) |
| |
| void intel_display_params_copy(struct intel_display_params *dest) |
| { |
| *dest = intel_display_modparams; |
| #define DUP(T, x, ...) _param_dup(&dest->x); |
| INTEL_DISPLAY_PARAMS_FOR_EACH(DUP); |
| #undef DUP |
| } |
| |
| __maybe_unused static void _param_free_charp(char **valp) |
| { |
| kfree(*valp); |
| *valp = NULL; |
| } |
| |
| #define _param_free(valp) \ |
| _Generic(valp, \ |
| char ** : _param_free_charp, \ |
| default : _param_nop) \ |
| (valp) |
| |
| /* free the allocated members, *not* the passed in params itself */ |
| void intel_display_params_free(struct intel_display_params *params) |
| { |
| #define FREE(T, x, ...) _param_free(¶ms->x); |
| INTEL_DISPLAY_PARAMS_FOR_EACH(FREE); |
| #undef FREE |
| } |