| // SPDX-License-Identifier: MIT |
| /* |
| * Copyright © 2019 Intel Corporation |
| * |
| */ |
| |
| #include "i915_drv.h" |
| #include "i915_irq.h" |
| #include "i915_reg.h" |
| #include "intel_crtc.h" |
| #include "intel_de.h" |
| #include "intel_display_types.h" |
| #include "intel_dsb.h" |
| #include "intel_dsb_buffer.h" |
| #include "intel_dsb_regs.h" |
| #include "intel_vblank.h" |
| #include "intel_vrr.h" |
| #include "skl_watermark.h" |
| |
| #define CACHELINE_BYTES 64 |
| |
| enum dsb_id { |
| INVALID_DSB = -1, |
| DSB1, |
| DSB2, |
| DSB3, |
| MAX_DSB_PER_PIPE |
| }; |
| |
| struct intel_dsb { |
| enum dsb_id id; |
| |
| struct intel_dsb_buffer dsb_buf; |
| struct intel_crtc *crtc; |
| |
| /* |
| * maximum number of dwords the buffer will hold. |
| */ |
| unsigned int size; |
| |
| /* |
| * free_pos will point the first free dword and |
| * help in calculating tail of command buffer. |
| */ |
| unsigned int free_pos; |
| |
| /* |
| * ins_start_offset will help to store start dword of the dsb |
| * instuction and help in identifying the batch of auto-increment |
| * register. |
| */ |
| unsigned int ins_start_offset; |
| |
| int dewake_scanline; |
| }; |
| |
| /** |
| * DOC: DSB |
| * |
| * A DSB (Display State Buffer) is a queue of MMIO instructions in the memory |
| * which can be offloaded to DSB HW in Display Controller. DSB HW is a DMA |
| * engine that can be programmed to download the DSB from memory. |
| * It allows driver to batch submit display HW programming. This helps to |
| * reduce loading time and CPU activity, thereby making the context switch |
| * faster. DSB Support added from Gen12 Intel graphics based platform. |
| * |
| * DSB's can access only the pipe, plane, and transcoder Data Island Packet |
| * registers. |
| * |
| * DSB HW can support only register writes (both indexed and direct MMIO |
| * writes). There are no registers reads possible with DSB HW engine. |
| */ |
| |
| /* DSB opcodes. */ |
| #define DSB_OPCODE_SHIFT 24 |
| #define DSB_OPCODE_NOOP 0x0 |
| #define DSB_OPCODE_MMIO_WRITE 0x1 |
| #define DSB_BYTE_EN 0xf |
| #define DSB_BYTE_EN_SHIFT 20 |
| #define DSB_REG_VALUE_MASK 0xfffff |
| #define DSB_OPCODE_WAIT_USEC 0x2 |
| #define DSB_OPCODE_WAIT_SCANLINE 0x3 |
| #define DSB_OPCODE_WAIT_VBLANKS 0x4 |
| #define DSB_OPCODE_WAIT_DSL_IN 0x5 |
| #define DSB_OPCODE_WAIT_DSL_OUT 0x6 |
| #define DSB_SCANLINE_UPPER_SHIFT 20 |
| #define DSB_SCANLINE_LOWER_SHIFT 0 |
| #define DSB_OPCODE_INTERRUPT 0x7 |
| #define DSB_OPCODE_INDEXED_WRITE 0x9 |
| /* see DSB_REG_VALUE_MASK */ |
| #define DSB_OPCODE_POLL 0xA |
| /* see DSB_REG_VALUE_MASK */ |
| |
| static bool assert_dsb_has_room(struct intel_dsb *dsb) |
| { |
| struct intel_crtc *crtc = dsb->crtc; |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| |
| /* each instruction is 2 dwords */ |
| return !drm_WARN(&i915->drm, dsb->free_pos > dsb->size - 2, |
| "[CRTC:%d:%s] DSB %d buffer overflow\n", |
| crtc->base.base.id, crtc->base.name, dsb->id); |
| } |
| |
| static void intel_dsb_dump(struct intel_dsb *dsb) |
| { |
| struct intel_crtc *crtc = dsb->crtc; |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| int i; |
| |
| drm_dbg_kms(&i915->drm, "[CRTC:%d:%s] DSB %d commands {\n", |
| crtc->base.base.id, crtc->base.name, dsb->id); |
| for (i = 0; i < ALIGN(dsb->free_pos, 64 / 4); i += 4) |
| drm_dbg_kms(&i915->drm, |
| " 0x%08x: 0x%08x 0x%08x 0x%08x 0x%08x\n", i * 4, |
| intel_dsb_buffer_read(&dsb->dsb_buf, i), |
| intel_dsb_buffer_read(&dsb->dsb_buf, i + 1), |
| intel_dsb_buffer_read(&dsb->dsb_buf, i + 2), |
| intel_dsb_buffer_read(&dsb->dsb_buf, i + 3)); |
| drm_dbg_kms(&i915->drm, "}\n"); |
| } |
| |
| static bool is_dsb_busy(struct drm_i915_private *i915, enum pipe pipe, |
| enum dsb_id id) |
| { |
| return intel_de_read_fw(i915, DSB_CTRL(pipe, id)) & DSB_STATUS_BUSY; |
| } |
| |
| static void intel_dsb_emit(struct intel_dsb *dsb, u32 ldw, u32 udw) |
| { |
| if (!assert_dsb_has_room(dsb)) |
| return; |
| |
| /* Every instruction should be 8 byte aligned. */ |
| dsb->free_pos = ALIGN(dsb->free_pos, 2); |
| |
| dsb->ins_start_offset = dsb->free_pos; |
| |
| intel_dsb_buffer_write(&dsb->dsb_buf, dsb->free_pos++, ldw); |
| intel_dsb_buffer_write(&dsb->dsb_buf, dsb->free_pos++, udw); |
| } |
| |
| static bool intel_dsb_prev_ins_is_write(struct intel_dsb *dsb, |
| u32 opcode, i915_reg_t reg) |
| { |
| u32 prev_opcode, prev_reg; |
| |
| /* |
| * Nothing emitted yet? Must check before looking |
| * at the actual data since i915_gem_object_create_internal() |
| * does *not* give you zeroed memory! |
| */ |
| if (dsb->free_pos == 0) |
| return false; |
| |
| prev_opcode = intel_dsb_buffer_read(&dsb->dsb_buf, |
| dsb->ins_start_offset + 1) & ~DSB_REG_VALUE_MASK; |
| prev_reg = intel_dsb_buffer_read(&dsb->dsb_buf, |
| dsb->ins_start_offset + 1) & DSB_REG_VALUE_MASK; |
| |
| return prev_opcode == opcode && prev_reg == i915_mmio_reg_offset(reg); |
| } |
| |
| static bool intel_dsb_prev_ins_is_mmio_write(struct intel_dsb *dsb, i915_reg_t reg) |
| { |
| /* only full byte-enables can be converted to indexed writes */ |
| return intel_dsb_prev_ins_is_write(dsb, |
| DSB_OPCODE_MMIO_WRITE << DSB_OPCODE_SHIFT | |
| DSB_BYTE_EN << DSB_BYTE_EN_SHIFT, |
| reg); |
| } |
| |
| static bool intel_dsb_prev_ins_is_indexed_write(struct intel_dsb *dsb, i915_reg_t reg) |
| { |
| return intel_dsb_prev_ins_is_write(dsb, |
| DSB_OPCODE_INDEXED_WRITE << DSB_OPCODE_SHIFT, |
| reg); |
| } |
| |
| /** |
| * intel_dsb_reg_write() - Emit register wriite to the DSB context |
| * @dsb: DSB context |
| * @reg: register address. |
| * @val: value. |
| * |
| * This function is used for writing register-value pair in command |
| * buffer of DSB. |
| */ |
| void intel_dsb_reg_write(struct intel_dsb *dsb, |
| i915_reg_t reg, u32 val) |
| { |
| u32 old_val; |
| |
| /* |
| * For example the buffer will look like below for 3 dwords for auto |
| * increment register: |
| * +--------------------------------------------------------+ |
| * | size = 3 | offset &| value1 | value2 | value3 | zero | |
| * | | opcode | | | | | |
| * +--------------------------------------------------------+ |
| * + + + + + + + |
| * 0 4 8 12 16 20 24 |
| * Byte |
| * |
| * As every instruction is 8 byte aligned the index of dsb instruction |
| * will start always from even number while dealing with u32 array. If |
| * we are writing odd no of dwords, Zeros will be added in the end for |
| * padding. |
| */ |
| if (!intel_dsb_prev_ins_is_mmio_write(dsb, reg) && |
| !intel_dsb_prev_ins_is_indexed_write(dsb, reg)) { |
| intel_dsb_emit(dsb, val, |
| (DSB_OPCODE_MMIO_WRITE << DSB_OPCODE_SHIFT) | |
| (DSB_BYTE_EN << DSB_BYTE_EN_SHIFT) | |
| i915_mmio_reg_offset(reg)); |
| } else { |
| if (!assert_dsb_has_room(dsb)) |
| return; |
| |
| /* convert to indexed write? */ |
| if (intel_dsb_prev_ins_is_mmio_write(dsb, reg)) { |
| u32 prev_val = intel_dsb_buffer_read(&dsb->dsb_buf, |
| dsb->ins_start_offset + 0); |
| |
| intel_dsb_buffer_write(&dsb->dsb_buf, |
| dsb->ins_start_offset + 0, 1); /* count */ |
| intel_dsb_buffer_write(&dsb->dsb_buf, dsb->ins_start_offset + 1, |
| (DSB_OPCODE_INDEXED_WRITE << DSB_OPCODE_SHIFT) | |
| i915_mmio_reg_offset(reg)); |
| intel_dsb_buffer_write(&dsb->dsb_buf, dsb->ins_start_offset + 2, prev_val); |
| |
| dsb->free_pos++; |
| } |
| |
| intel_dsb_buffer_write(&dsb->dsb_buf, dsb->free_pos++, val); |
| /* Update the count */ |
| old_val = intel_dsb_buffer_read(&dsb->dsb_buf, dsb->ins_start_offset); |
| intel_dsb_buffer_write(&dsb->dsb_buf, dsb->ins_start_offset, old_val + 1); |
| |
| /* if number of data words is odd, then the last dword should be 0.*/ |
| if (dsb->free_pos & 0x1) |
| intel_dsb_buffer_write(&dsb->dsb_buf, dsb->free_pos, 0); |
| } |
| } |
| |
| static u32 intel_dsb_mask_to_byte_en(u32 mask) |
| { |
| return (!!(mask & 0xff000000) << 3 | |
| !!(mask & 0x00ff0000) << 2 | |
| !!(mask & 0x0000ff00) << 1 | |
| !!(mask & 0x000000ff) << 0); |
| } |
| |
| /* Note: mask implemented via byte enables! */ |
| void intel_dsb_reg_write_masked(struct intel_dsb *dsb, |
| i915_reg_t reg, u32 mask, u32 val) |
| { |
| intel_dsb_emit(dsb, val, |
| (DSB_OPCODE_MMIO_WRITE << DSB_OPCODE_SHIFT) | |
| (intel_dsb_mask_to_byte_en(mask) << DSB_BYTE_EN_SHIFT) | |
| i915_mmio_reg_offset(reg)); |
| } |
| |
| void intel_dsb_noop(struct intel_dsb *dsb, int count) |
| { |
| int i; |
| |
| for (i = 0; i < count; i++) |
| intel_dsb_emit(dsb, 0, |
| DSB_OPCODE_NOOP << DSB_OPCODE_SHIFT); |
| } |
| |
| void intel_dsb_nonpost_start(struct intel_dsb *dsb) |
| { |
| struct intel_crtc *crtc = dsb->crtc; |
| enum pipe pipe = crtc->pipe; |
| |
| intel_dsb_reg_write_masked(dsb, DSB_CTRL(pipe, dsb->id), |
| DSB_NON_POSTED, DSB_NON_POSTED); |
| intel_dsb_noop(dsb, 4); |
| } |
| |
| void intel_dsb_nonpost_end(struct intel_dsb *dsb) |
| { |
| struct intel_crtc *crtc = dsb->crtc; |
| enum pipe pipe = crtc->pipe; |
| |
| intel_dsb_reg_write_masked(dsb, DSB_CTRL(pipe, dsb->id), |
| DSB_NON_POSTED, 0); |
| intel_dsb_noop(dsb, 4); |
| } |
| |
| static void intel_dsb_align_tail(struct intel_dsb *dsb) |
| { |
| u32 aligned_tail, tail; |
| |
| tail = dsb->free_pos * 4; |
| aligned_tail = ALIGN(tail, CACHELINE_BYTES); |
| |
| if (aligned_tail > tail) |
| intel_dsb_buffer_memset(&dsb->dsb_buf, dsb->free_pos, 0, |
| aligned_tail - tail); |
| |
| dsb->free_pos = aligned_tail / 4; |
| } |
| |
| void intel_dsb_finish(struct intel_dsb *dsb) |
| { |
| struct intel_crtc *crtc = dsb->crtc; |
| |
| /* |
| * DSB_FORCE_DEWAKE remains active even after DSB is |
| * disabled, so make sure to clear it (if set during |
| * intel_dsb_commit()). |
| */ |
| intel_dsb_reg_write_masked(dsb, DSB_PMCTRL_2(crtc->pipe, dsb->id), |
| DSB_FORCE_DEWAKE, 0); |
| |
| intel_dsb_align_tail(dsb); |
| |
| intel_dsb_buffer_flush_map(&dsb->dsb_buf); |
| } |
| |
| static int intel_dsb_dewake_scanline(const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev); |
| const struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode; |
| unsigned int latency = skl_watermark_max_latency(i915, 0); |
| int vblank_start; |
| |
| if (crtc_state->vrr.enable) { |
| vblank_start = intel_vrr_vmin_vblank_start(crtc_state); |
| } else { |
| vblank_start = adjusted_mode->crtc_vblank_start; |
| |
| if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) |
| vblank_start = DIV_ROUND_UP(vblank_start, 2); |
| } |
| |
| return max(0, vblank_start - intel_usecs_to_scanlines(adjusted_mode, latency)); |
| } |
| |
| static void _intel_dsb_commit(struct intel_dsb *dsb, u32 ctrl, |
| int dewake_scanline) |
| { |
| struct intel_crtc *crtc = dsb->crtc; |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum pipe pipe = crtc->pipe; |
| u32 tail; |
| |
| tail = dsb->free_pos * 4; |
| if (drm_WARN_ON(&dev_priv->drm, !IS_ALIGNED(tail, CACHELINE_BYTES))) |
| return; |
| |
| if (is_dsb_busy(dev_priv, pipe, dsb->id)) { |
| drm_err(&dev_priv->drm, "[CRTC:%d:%s] DSB %d is busy\n", |
| crtc->base.base.id, crtc->base.name, dsb->id); |
| return; |
| } |
| |
| intel_de_write_fw(dev_priv, DSB_CTRL(pipe, dsb->id), |
| ctrl | DSB_ENABLE); |
| |
| intel_de_write_fw(dev_priv, DSB_HEAD(pipe, dsb->id), |
| intel_dsb_buffer_ggtt_offset(&dsb->dsb_buf)); |
| |
| if (dewake_scanline >= 0) { |
| int diff, hw_dewake_scanline; |
| |
| hw_dewake_scanline = intel_crtc_scanline_to_hw(crtc, dewake_scanline); |
| |
| intel_de_write_fw(dev_priv, DSB_PMCTRL(pipe, dsb->id), |
| DSB_ENABLE_DEWAKE | |
| DSB_SCANLINE_FOR_DEWAKE(hw_dewake_scanline)); |
| |
| /* |
| * Force DEwake immediately if we're already past |
| * or close to racing past the target scanline. |
| */ |
| diff = dewake_scanline - intel_get_crtc_scanline(crtc); |
| intel_de_write_fw(dev_priv, DSB_PMCTRL_2(pipe, dsb->id), |
| (diff >= 0 && diff < 5 ? DSB_FORCE_DEWAKE : 0) | |
| DSB_BLOCK_DEWAKE_EXTENSION); |
| } |
| |
| intel_de_write_fw(dev_priv, DSB_TAIL(pipe, dsb->id), |
| intel_dsb_buffer_ggtt_offset(&dsb->dsb_buf) + tail); |
| } |
| |
| /** |
| * intel_dsb_commit() - Trigger workload execution of DSB. |
| * @dsb: DSB context |
| * @wait_for_vblank: wait for vblank before executing |
| * |
| * This function is used to do actual write to hardware using DSB. |
| */ |
| void intel_dsb_commit(struct intel_dsb *dsb, |
| bool wait_for_vblank) |
| { |
| _intel_dsb_commit(dsb, |
| wait_for_vblank ? DSB_WAIT_FOR_VBLANK : 0, |
| wait_for_vblank ? dsb->dewake_scanline : -1); |
| } |
| |
| void intel_dsb_wait(struct intel_dsb *dsb) |
| { |
| struct intel_crtc *crtc = dsb->crtc; |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| enum pipe pipe = crtc->pipe; |
| |
| if (wait_for(!is_dsb_busy(dev_priv, pipe, dsb->id), 1)) { |
| u32 offset = intel_dsb_buffer_ggtt_offset(&dsb->dsb_buf); |
| |
| intel_de_write_fw(dev_priv, DSB_CTRL(pipe, dsb->id), |
| DSB_ENABLE | DSB_HALT); |
| |
| drm_err(&dev_priv->drm, |
| "[CRTC:%d:%s] DSB %d timed out waiting for idle (current head=0x%x, head=0x%x, tail=0x%x)\n", |
| crtc->base.base.id, crtc->base.name, dsb->id, |
| intel_de_read_fw(dev_priv, DSB_CURRENT_HEAD(pipe, dsb->id)) - offset, |
| intel_de_read_fw(dev_priv, DSB_HEAD(pipe, dsb->id)) - offset, |
| intel_de_read_fw(dev_priv, DSB_TAIL(pipe, dsb->id)) - offset); |
| |
| intel_dsb_dump(dsb); |
| } |
| |
| /* Attempt to reset it */ |
| dsb->free_pos = 0; |
| dsb->ins_start_offset = 0; |
| intel_de_write_fw(dev_priv, DSB_CTRL(pipe, dsb->id), 0); |
| } |
| |
| /** |
| * intel_dsb_prepare() - Allocate, pin and map the DSB command buffer. |
| * @crtc_state: the CRTC state |
| * @max_cmds: number of commands we need to fit into command buffer |
| * |
| * This function prepare the command buffer which is used to store dsb |
| * instructions with data. |
| * |
| * Returns: |
| * DSB context, NULL on failure |
| */ |
| struct intel_dsb *intel_dsb_prepare(const struct intel_crtc_state *crtc_state, |
| unsigned int max_cmds) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| intel_wakeref_t wakeref; |
| struct intel_dsb *dsb; |
| unsigned int size; |
| |
| if (!HAS_DSB(i915)) |
| return NULL; |
| |
| /* TODO: DSB is broken in Xe KMD, so disabling it until fixed */ |
| if (!IS_ENABLED(I915)) |
| return NULL; |
| |
| dsb = kzalloc(sizeof(*dsb), GFP_KERNEL); |
| if (!dsb) |
| goto out; |
| |
| wakeref = intel_runtime_pm_get(&i915->runtime_pm); |
| |
| /* ~1 qword per instruction, full cachelines */ |
| size = ALIGN(max_cmds * 8, CACHELINE_BYTES); |
| |
| if (!intel_dsb_buffer_create(crtc, &dsb->dsb_buf, size)) |
| goto out_put_rpm; |
| |
| intel_runtime_pm_put(&i915->runtime_pm, wakeref); |
| |
| dsb->id = DSB1; |
| dsb->crtc = crtc; |
| dsb->size = size / 4; /* in dwords */ |
| dsb->free_pos = 0; |
| dsb->ins_start_offset = 0; |
| dsb->dewake_scanline = intel_dsb_dewake_scanline(crtc_state); |
| |
| return dsb; |
| |
| out_put_rpm: |
| intel_runtime_pm_put(&i915->runtime_pm, wakeref); |
| kfree(dsb); |
| out: |
| drm_info_once(&i915->drm, |
| "[CRTC:%d:%s] DSB %d queue setup failed, will fallback to MMIO for display HW programming\n", |
| crtc->base.base.id, crtc->base.name, DSB1); |
| |
| return NULL; |
| } |
| |
| /** |
| * intel_dsb_cleanup() - To cleanup DSB context. |
| * @dsb: DSB context |
| * |
| * This function cleanup the DSB context by unpinning and releasing |
| * the VMA object associated with it. |
| */ |
| void intel_dsb_cleanup(struct intel_dsb *dsb) |
| { |
| intel_dsb_buffer_cleanup(&dsb->dsb_buf); |
| kfree(dsb); |
| } |