| // SPDX-License-Identifier: MIT |
| /* |
| * Copyright © 2022 Intel Corporation |
| * |
| * Read out the current hardware modeset state, and sanitize it to the current |
| * state. |
| */ |
| |
| #include <drm/drm_atomic_uapi.h> |
| #include <drm/drm_atomic_state_helper.h> |
| |
| #include "i915_drv.h" |
| #include "i915_reg.h" |
| #include "i9xx_wm.h" |
| #include "intel_atomic.h" |
| #include "intel_bw.h" |
| #include "intel_color.h" |
| #include "intel_crtc.h" |
| #include "intel_crtc_state_dump.h" |
| #include "intel_ddi.h" |
| #include "intel_de.h" |
| #include "intel_display.h" |
| #include "intel_display_power.h" |
| #include "intel_display_types.h" |
| #include "intel_dmc.h" |
| #include "intel_fifo_underrun.h" |
| #include "intel_modeset_setup.h" |
| #include "intel_pch_display.h" |
| #include "intel_pmdemand.h" |
| #include "intel_tc.h" |
| #include "intel_vblank.h" |
| #include "intel_wm.h" |
| #include "skl_watermark.h" |
| |
| static void intel_crtc_disable_noatomic_begin(struct intel_crtc *crtc, |
| struct drm_modeset_acquire_ctx *ctx) |
| { |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| struct intel_crtc_state *crtc_state = |
| to_intel_crtc_state(crtc->base.state); |
| struct intel_plane *plane; |
| struct drm_atomic_state *state; |
| struct intel_crtc *temp_crtc; |
| enum pipe pipe = crtc->pipe; |
| |
| if (!crtc_state->hw.active) |
| return; |
| |
| for_each_intel_plane_on_crtc(&i915->drm, crtc, plane) { |
| const struct intel_plane_state *plane_state = |
| to_intel_plane_state(plane->base.state); |
| |
| if (plane_state->uapi.visible) |
| intel_plane_disable_noatomic(crtc, plane); |
| } |
| |
| state = drm_atomic_state_alloc(&i915->drm); |
| if (!state) { |
| drm_dbg_kms(&i915->drm, |
| "failed to disable [CRTC:%d:%s], out of memory", |
| crtc->base.base.id, crtc->base.name); |
| return; |
| } |
| |
| state->acquire_ctx = ctx; |
| to_intel_atomic_state(state)->internal = true; |
| |
| /* Everything's already locked, -EDEADLK can't happen. */ |
| for_each_intel_crtc_in_pipe_mask(&i915->drm, temp_crtc, |
| BIT(pipe) | |
| intel_crtc_bigjoiner_slave_pipes(crtc_state)) { |
| struct intel_crtc_state *temp_crtc_state = |
| intel_atomic_get_crtc_state(state, temp_crtc); |
| int ret; |
| |
| ret = drm_atomic_add_affected_connectors(state, &temp_crtc->base); |
| |
| drm_WARN_ON(&i915->drm, IS_ERR(temp_crtc_state) || ret); |
| } |
| |
| i915->display.funcs.display->crtc_disable(to_intel_atomic_state(state), crtc); |
| |
| drm_atomic_state_put(state); |
| |
| drm_dbg_kms(&i915->drm, |
| "[CRTC:%d:%s] hw state adjusted, was enabled, now disabled\n", |
| crtc->base.base.id, crtc->base.name); |
| |
| crtc->active = false; |
| crtc->base.enabled = false; |
| |
| if (crtc_state->shared_dpll) |
| intel_unreference_shared_dpll_crtc(crtc, |
| crtc_state->shared_dpll, |
| &crtc_state->shared_dpll->state); |
| } |
| |
| static void set_encoder_for_connector(struct intel_connector *connector, |
| struct intel_encoder *encoder) |
| { |
| struct drm_connector_state *conn_state = connector->base.state; |
| |
| if (conn_state->crtc) |
| drm_connector_put(&connector->base); |
| |
| if (encoder) { |
| conn_state->best_encoder = &encoder->base; |
| conn_state->crtc = encoder->base.crtc; |
| drm_connector_get(&connector->base); |
| } else { |
| conn_state->best_encoder = NULL; |
| conn_state->crtc = NULL; |
| } |
| } |
| |
| static void reset_encoder_connector_state(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| struct intel_pmdemand_state *pmdemand_state = |
| to_intel_pmdemand_state(i915->display.pmdemand.obj.state); |
| struct intel_connector *connector; |
| struct drm_connector_list_iter conn_iter; |
| |
| drm_connector_list_iter_begin(&i915->drm, &conn_iter); |
| for_each_intel_connector_iter(connector, &conn_iter) { |
| if (connector->base.encoder != &encoder->base) |
| continue; |
| |
| /* Clear the corresponding bit in pmdemand active phys mask */ |
| intel_pmdemand_update_phys_mask(i915, encoder, |
| pmdemand_state, false); |
| |
| set_encoder_for_connector(connector, NULL); |
| |
| connector->base.dpms = DRM_MODE_DPMS_OFF; |
| connector->base.encoder = NULL; |
| } |
| drm_connector_list_iter_end(&conn_iter); |
| } |
| |
| static void reset_crtc_encoder_state(struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| struct intel_encoder *encoder; |
| |
| for_each_encoder_on_crtc(&i915->drm, &crtc->base, encoder) { |
| reset_encoder_connector_state(encoder); |
| encoder->base.crtc = NULL; |
| } |
| } |
| |
| static void intel_crtc_disable_noatomic_complete(struct intel_crtc *crtc) |
| { |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| struct intel_bw_state *bw_state = |
| to_intel_bw_state(i915->display.bw.obj.state); |
| struct intel_cdclk_state *cdclk_state = |
| to_intel_cdclk_state(i915->display.cdclk.obj.state); |
| struct intel_dbuf_state *dbuf_state = |
| to_intel_dbuf_state(i915->display.dbuf.obj.state); |
| struct intel_pmdemand_state *pmdemand_state = |
| to_intel_pmdemand_state(i915->display.pmdemand.obj.state); |
| struct intel_crtc_state *crtc_state = |
| to_intel_crtc_state(crtc->base.state); |
| enum pipe pipe = crtc->pipe; |
| |
| __drm_atomic_helper_crtc_destroy_state(&crtc_state->uapi); |
| intel_crtc_free_hw_state(crtc_state); |
| intel_crtc_state_reset(crtc_state, crtc); |
| |
| reset_crtc_encoder_state(crtc); |
| |
| intel_fbc_disable(crtc); |
| intel_update_watermarks(i915); |
| |
| intel_display_power_put_all_in_set(i915, &crtc->enabled_power_domains); |
| |
| cdclk_state->min_cdclk[pipe] = 0; |
| cdclk_state->min_voltage_level[pipe] = 0; |
| cdclk_state->active_pipes &= ~BIT(pipe); |
| |
| dbuf_state->active_pipes &= ~BIT(pipe); |
| |
| bw_state->data_rate[pipe] = 0; |
| bw_state->num_active_planes[pipe] = 0; |
| |
| intel_pmdemand_update_port_clock(i915, pmdemand_state, pipe, 0); |
| } |
| |
| /* |
| * Return all the pipes using a transcoder in @transcoder_mask. |
| * For bigjoiner configs return only the bigjoiner master. |
| */ |
| static u8 get_transcoder_pipes(struct drm_i915_private *i915, |
| u8 transcoder_mask) |
| { |
| struct intel_crtc *temp_crtc; |
| u8 pipes = 0; |
| |
| for_each_intel_crtc(&i915->drm, temp_crtc) { |
| struct intel_crtc_state *temp_crtc_state = |
| to_intel_crtc_state(temp_crtc->base.state); |
| |
| if (temp_crtc_state->cpu_transcoder == INVALID_TRANSCODER) |
| continue; |
| |
| if (intel_crtc_is_bigjoiner_slave(temp_crtc_state)) |
| continue; |
| |
| if (transcoder_mask & BIT(temp_crtc_state->cpu_transcoder)) |
| pipes |= BIT(temp_crtc->pipe); |
| } |
| |
| return pipes; |
| } |
| |
| /* |
| * Return the port sync master and slave pipes linked to @crtc. |
| * For bigjoiner configs return only the bigjoiner master pipes. |
| */ |
| static void get_portsync_pipes(struct intel_crtc *crtc, |
| u8 *master_pipe_mask, u8 *slave_pipes_mask) |
| { |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| struct intel_crtc_state *crtc_state = |
| to_intel_crtc_state(crtc->base.state); |
| struct intel_crtc *master_crtc; |
| struct intel_crtc_state *master_crtc_state; |
| enum transcoder master_transcoder; |
| |
| if (!is_trans_port_sync_mode(crtc_state)) { |
| *master_pipe_mask = BIT(crtc->pipe); |
| *slave_pipes_mask = 0; |
| |
| return; |
| } |
| |
| if (is_trans_port_sync_master(crtc_state)) |
| master_transcoder = crtc_state->cpu_transcoder; |
| else |
| master_transcoder = crtc_state->master_transcoder; |
| |
| *master_pipe_mask = get_transcoder_pipes(i915, BIT(master_transcoder)); |
| drm_WARN_ON(&i915->drm, !is_power_of_2(*master_pipe_mask)); |
| |
| master_crtc = intel_crtc_for_pipe(i915, ffs(*master_pipe_mask) - 1); |
| master_crtc_state = to_intel_crtc_state(master_crtc->base.state); |
| *slave_pipes_mask = get_transcoder_pipes(i915, master_crtc_state->sync_mode_slaves_mask); |
| } |
| |
| static u8 get_bigjoiner_slave_pipes(struct drm_i915_private *i915, u8 master_pipes_mask) |
| { |
| struct intel_crtc *master_crtc; |
| u8 pipes = 0; |
| |
| for_each_intel_crtc_in_pipe_mask(&i915->drm, master_crtc, master_pipes_mask) { |
| struct intel_crtc_state *master_crtc_state = |
| to_intel_crtc_state(master_crtc->base.state); |
| |
| pipes |= intel_crtc_bigjoiner_slave_pipes(master_crtc_state); |
| } |
| |
| return pipes; |
| } |
| |
| static void intel_crtc_disable_noatomic(struct intel_crtc *crtc, |
| struct drm_modeset_acquire_ctx *ctx) |
| { |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| u8 portsync_master_mask; |
| u8 portsync_slaves_mask; |
| u8 bigjoiner_slaves_mask; |
| struct intel_crtc *temp_crtc; |
| |
| /* TODO: Add support for MST */ |
| get_portsync_pipes(crtc, &portsync_master_mask, &portsync_slaves_mask); |
| bigjoiner_slaves_mask = get_bigjoiner_slave_pipes(i915, |
| portsync_master_mask | |
| portsync_slaves_mask); |
| |
| drm_WARN_ON(&i915->drm, |
| portsync_master_mask & portsync_slaves_mask || |
| portsync_master_mask & bigjoiner_slaves_mask || |
| portsync_slaves_mask & bigjoiner_slaves_mask); |
| |
| for_each_intel_crtc_in_pipe_mask(&i915->drm, temp_crtc, bigjoiner_slaves_mask) |
| intel_crtc_disable_noatomic_begin(temp_crtc, ctx); |
| |
| for_each_intel_crtc_in_pipe_mask(&i915->drm, temp_crtc, portsync_slaves_mask) |
| intel_crtc_disable_noatomic_begin(temp_crtc, ctx); |
| |
| for_each_intel_crtc_in_pipe_mask(&i915->drm, temp_crtc, portsync_master_mask) |
| intel_crtc_disable_noatomic_begin(temp_crtc, ctx); |
| |
| for_each_intel_crtc_in_pipe_mask(&i915->drm, temp_crtc, |
| bigjoiner_slaves_mask | |
| portsync_slaves_mask | |
| portsync_master_mask) |
| intel_crtc_disable_noatomic_complete(temp_crtc); |
| } |
| |
| static void intel_modeset_update_connector_atomic_state(struct drm_i915_private *i915) |
| { |
| struct intel_connector *connector; |
| struct drm_connector_list_iter conn_iter; |
| |
| drm_connector_list_iter_begin(&i915->drm, &conn_iter); |
| for_each_intel_connector_iter(connector, &conn_iter) { |
| struct drm_connector_state *conn_state = connector->base.state; |
| struct intel_encoder *encoder = |
| to_intel_encoder(connector->base.encoder); |
| |
| set_encoder_for_connector(connector, encoder); |
| |
| if (encoder) { |
| struct intel_crtc *crtc = |
| to_intel_crtc(encoder->base.crtc); |
| const struct intel_crtc_state *crtc_state = |
| to_intel_crtc_state(crtc->base.state); |
| |
| conn_state->max_bpc = (crtc_state->pipe_bpp ?: 24) / 3; |
| } |
| } |
| drm_connector_list_iter_end(&conn_iter); |
| } |
| |
| static void intel_crtc_copy_hw_to_uapi_state(struct intel_crtc_state *crtc_state) |
| { |
| if (intel_crtc_is_bigjoiner_slave(crtc_state)) |
| return; |
| |
| crtc_state->uapi.enable = crtc_state->hw.enable; |
| crtc_state->uapi.active = crtc_state->hw.active; |
| drm_WARN_ON(crtc_state->uapi.crtc->dev, |
| drm_atomic_set_mode_for_crtc(&crtc_state->uapi, &crtc_state->hw.mode) < 0); |
| |
| crtc_state->uapi.adjusted_mode = crtc_state->hw.adjusted_mode; |
| crtc_state->uapi.scaling_filter = crtc_state->hw.scaling_filter; |
| |
| /* assume 1:1 mapping */ |
| drm_property_replace_blob(&crtc_state->hw.degamma_lut, |
| crtc_state->pre_csc_lut); |
| drm_property_replace_blob(&crtc_state->hw.gamma_lut, |
| crtc_state->post_csc_lut); |
| |
| drm_property_replace_blob(&crtc_state->uapi.degamma_lut, |
| crtc_state->hw.degamma_lut); |
| drm_property_replace_blob(&crtc_state->uapi.gamma_lut, |
| crtc_state->hw.gamma_lut); |
| drm_property_replace_blob(&crtc_state->uapi.ctm, |
| crtc_state->hw.ctm); |
| } |
| |
| static void |
| intel_sanitize_plane_mapping(struct drm_i915_private *i915) |
| { |
| struct intel_crtc *crtc; |
| |
| if (DISPLAY_VER(i915) >= 4) |
| return; |
| |
| for_each_intel_crtc(&i915->drm, crtc) { |
| struct intel_plane *plane = |
| to_intel_plane(crtc->base.primary); |
| struct intel_crtc *plane_crtc; |
| enum pipe pipe; |
| |
| if (!plane->get_hw_state(plane, &pipe)) |
| continue; |
| |
| if (pipe == crtc->pipe) |
| continue; |
| |
| drm_dbg_kms(&i915->drm, |
| "[PLANE:%d:%s] attached to the wrong pipe, disabling plane\n", |
| plane->base.base.id, plane->base.name); |
| |
| plane_crtc = intel_crtc_for_pipe(i915, pipe); |
| intel_plane_disable_noatomic(plane_crtc, plane); |
| } |
| } |
| |
| static bool intel_crtc_has_encoders(struct intel_crtc *crtc) |
| { |
| struct drm_device *dev = crtc->base.dev; |
| struct intel_encoder *encoder; |
| |
| for_each_encoder_on_crtc(dev, &crtc->base, encoder) |
| return true; |
| |
| return false; |
| } |
| |
| static bool intel_crtc_needs_link_reset(struct intel_crtc *crtc) |
| { |
| struct drm_device *dev = crtc->base.dev; |
| struct intel_encoder *encoder; |
| |
| for_each_encoder_on_crtc(dev, &crtc->base, encoder) { |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); |
| |
| if (dig_port && intel_tc_port_link_needs_reset(dig_port)) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| static struct intel_connector *intel_encoder_find_connector(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| struct drm_connector_list_iter conn_iter; |
| struct intel_connector *connector; |
| struct intel_connector *found_connector = NULL; |
| |
| drm_connector_list_iter_begin(&i915->drm, &conn_iter); |
| for_each_intel_connector_iter(connector, &conn_iter) { |
| if (&encoder->base == connector->base.encoder) { |
| found_connector = connector; |
| break; |
| } |
| } |
| drm_connector_list_iter_end(&conn_iter); |
| |
| return found_connector; |
| } |
| |
| static void intel_sanitize_fifo_underrun_reporting(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| |
| /* |
| * We start out with underrun reporting disabled on active |
| * pipes to avoid races. |
| * |
| * Also on gmch platforms we dont have any hardware bits to |
| * disable the underrun reporting. Which means we need to start |
| * out with underrun reporting disabled also on inactive pipes, |
| * since otherwise we'll complain about the garbage we read when |
| * e.g. coming up after runtime pm. |
| * |
| * No protection against concurrent access is required - at |
| * worst a fifo underrun happens which also sets this to false. |
| */ |
| intel_init_fifo_underrun_reporting(i915, crtc, |
| !crtc_state->hw.active && |
| !HAS_GMCH(i915)); |
| } |
| |
| static bool intel_sanitize_crtc(struct intel_crtc *crtc, |
| struct drm_modeset_acquire_ctx *ctx) |
| { |
| struct drm_i915_private *i915 = to_i915(crtc->base.dev); |
| struct intel_crtc_state *crtc_state = to_intel_crtc_state(crtc->base.state); |
| bool needs_link_reset; |
| |
| if (crtc_state->hw.active) { |
| struct intel_plane *plane; |
| |
| /* Disable everything but the primary plane */ |
| for_each_intel_plane_on_crtc(&i915->drm, crtc, plane) { |
| const struct intel_plane_state *plane_state = |
| to_intel_plane_state(plane->base.state); |
| |
| if (plane_state->uapi.visible && |
| plane->base.type != DRM_PLANE_TYPE_PRIMARY) |
| intel_plane_disable_noatomic(crtc, plane); |
| } |
| |
| /* Disable any background color/etc. set by the BIOS */ |
| intel_color_commit_noarm(crtc_state); |
| intel_color_commit_arm(crtc_state); |
| } |
| |
| if (!crtc_state->hw.active || |
| intel_crtc_is_bigjoiner_slave(crtc_state)) |
| return false; |
| |
| needs_link_reset = intel_crtc_needs_link_reset(crtc); |
| |
| /* |
| * Adjust the state of the output pipe according to whether we have |
| * active connectors/encoders. |
| */ |
| if (!needs_link_reset && intel_crtc_has_encoders(crtc)) |
| return false; |
| |
| intel_crtc_disable_noatomic(crtc, ctx); |
| |
| /* |
| * The HPD state on other active/disconnected TC ports may be stuck in |
| * the connected state until this port is disabled and a ~10ms delay has |
| * passed, wait here for that so that sanitizing other CRTCs will see the |
| * up-to-date HPD state. |
| */ |
| if (needs_link_reset) |
| msleep(20); |
| |
| return true; |
| } |
| |
| static void intel_sanitize_all_crtcs(struct drm_i915_private *i915, |
| struct drm_modeset_acquire_ctx *ctx) |
| { |
| struct intel_crtc *crtc; |
| u32 crtcs_forced_off = 0; |
| |
| /* |
| * An active and disconnected TypeC port prevents the HPD live state |
| * to get updated on other active/disconnected TypeC ports, so after |
| * a port gets disabled the CRTCs using other TypeC ports must be |
| * rechecked wrt. their link status. |
| */ |
| for (;;) { |
| u32 old_mask = crtcs_forced_off; |
| |
| for_each_intel_crtc(&i915->drm, crtc) { |
| u32 crtc_mask = drm_crtc_mask(&crtc->base); |
| |
| if (crtcs_forced_off & crtc_mask) |
| continue; |
| |
| if (intel_sanitize_crtc(crtc, ctx)) |
| crtcs_forced_off |= crtc_mask; |
| } |
| if (crtcs_forced_off == old_mask) |
| break; |
| } |
| |
| for_each_intel_crtc(&i915->drm, crtc) { |
| struct intel_crtc_state *crtc_state = |
| to_intel_crtc_state(crtc->base.state); |
| |
| intel_crtc_state_dump(crtc_state, NULL, "setup_hw_state"); |
| } |
| } |
| |
| static bool has_bogus_dpll_config(const struct intel_crtc_state *crtc_state) |
| { |
| struct drm_i915_private *i915 = to_i915(crtc_state->uapi.crtc->dev); |
| |
| /* |
| * Some SNB BIOSen (eg. ASUS K53SV) are known to misprogram |
| * the hardware when a high res displays plugged in. DPLL P |
| * divider is zero, and the pipe timings are bonkers. We'll |
| * try to disable everything in that case. |
| * |
| * FIXME would be nice to be able to sanitize this state |
| * without several WARNs, but for now let's take the easy |
| * road. |
| */ |
| return IS_SANDYBRIDGE(i915) && |
| crtc_state->hw.active && |
| crtc_state->shared_dpll && |
| crtc_state->port_clock == 0; |
| } |
| |
| static void intel_sanitize_encoder(struct intel_encoder *encoder) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| struct intel_connector *connector; |
| struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc); |
| struct intel_crtc_state *crtc_state = crtc ? |
| to_intel_crtc_state(crtc->base.state) : NULL; |
| struct intel_pmdemand_state *pmdemand_state = |
| to_intel_pmdemand_state(i915->display.pmdemand.obj.state); |
| |
| /* |
| * We need to check both for a crtc link (meaning that the encoder is |
| * active and trying to read from a pipe) and the pipe itself being |
| * active. |
| */ |
| bool has_active_crtc = crtc_state && |
| crtc_state->hw.active; |
| |
| if (crtc_state && has_bogus_dpll_config(crtc_state)) { |
| drm_dbg_kms(&i915->drm, |
| "BIOS has misprogrammed the hardware. Disabling pipe %c\n", |
| pipe_name(crtc->pipe)); |
| has_active_crtc = false; |
| } |
| |
| connector = intel_encoder_find_connector(encoder); |
| if (connector && !has_active_crtc) { |
| drm_dbg_kms(&i915->drm, |
| "[ENCODER:%d:%s] has active connectors but no active pipe!\n", |
| encoder->base.base.id, |
| encoder->base.name); |
| |
| /* Clear the corresponding bit in pmdemand active phys mask */ |
| intel_pmdemand_update_phys_mask(i915, encoder, |
| pmdemand_state, false); |
| |
| /* |
| * Connector is active, but has no active pipe. This is fallout |
| * from our resume register restoring. Disable the encoder |
| * manually again. |
| */ |
| if (crtc_state) { |
| struct drm_encoder *best_encoder; |
| |
| drm_dbg_kms(&i915->drm, |
| "[ENCODER:%d:%s] manually disabled\n", |
| encoder->base.base.id, |
| encoder->base.name); |
| |
| /* avoid oopsing in case the hooks consult best_encoder */ |
| best_encoder = connector->base.state->best_encoder; |
| connector->base.state->best_encoder = &encoder->base; |
| |
| /* FIXME NULL atomic state passed! */ |
| if (encoder->disable) |
| encoder->disable(NULL, encoder, crtc_state, |
| connector->base.state); |
| if (encoder->post_disable) |
| encoder->post_disable(NULL, encoder, crtc_state, |
| connector->base.state); |
| |
| connector->base.state->best_encoder = best_encoder; |
| } |
| encoder->base.crtc = NULL; |
| |
| /* |
| * Inconsistent output/port/pipe state happens presumably due to |
| * a bug in one of the get_hw_state functions. Or someplace else |
| * in our code, like the register restore mess on resume. Clamp |
| * things to off as a safer default. |
| */ |
| connector->base.dpms = DRM_MODE_DPMS_OFF; |
| connector->base.encoder = NULL; |
| } |
| |
| /* notify opregion of the sanitized encoder state */ |
| intel_opregion_notify_encoder(encoder, connector && has_active_crtc); |
| |
| if (HAS_DDI(i915)) |
| intel_ddi_sanitize_encoder_pll_mapping(encoder); |
| } |
| |
| /* FIXME read out full plane state for all planes */ |
| static void readout_plane_state(struct drm_i915_private *i915) |
| { |
| struct intel_plane *plane; |
| struct intel_crtc *crtc; |
| |
| for_each_intel_plane(&i915->drm, plane) { |
| struct intel_plane_state *plane_state = |
| to_intel_plane_state(plane->base.state); |
| struct intel_crtc_state *crtc_state; |
| enum pipe pipe = PIPE_A; |
| bool visible; |
| |
| visible = plane->get_hw_state(plane, &pipe); |
| |
| crtc = intel_crtc_for_pipe(i915, pipe); |
| crtc_state = to_intel_crtc_state(crtc->base.state); |
| |
| intel_set_plane_visible(crtc_state, plane_state, visible); |
| |
| drm_dbg_kms(&i915->drm, |
| "[PLANE:%d:%s] hw state readout: %s, pipe %c\n", |
| plane->base.base.id, plane->base.name, |
| str_enabled_disabled(visible), pipe_name(pipe)); |
| } |
| |
| for_each_intel_crtc(&i915->drm, crtc) { |
| struct intel_crtc_state *crtc_state = |
| to_intel_crtc_state(crtc->base.state); |
| |
| intel_plane_fixup_bitmasks(crtc_state); |
| } |
| } |
| |
| static void intel_modeset_readout_hw_state(struct drm_i915_private *i915) |
| { |
| struct intel_cdclk_state *cdclk_state = |
| to_intel_cdclk_state(i915->display.cdclk.obj.state); |
| struct intel_dbuf_state *dbuf_state = |
| to_intel_dbuf_state(i915->display.dbuf.obj.state); |
| struct intel_pmdemand_state *pmdemand_state = |
| to_intel_pmdemand_state(i915->display.pmdemand.obj.state); |
| enum pipe pipe; |
| struct intel_crtc *crtc; |
| struct intel_encoder *encoder; |
| struct intel_connector *connector; |
| struct drm_connector_list_iter conn_iter; |
| u8 active_pipes = 0; |
| |
| for_each_intel_crtc(&i915->drm, crtc) { |
| struct intel_crtc_state *crtc_state = |
| to_intel_crtc_state(crtc->base.state); |
| |
| __drm_atomic_helper_crtc_destroy_state(&crtc_state->uapi); |
| intel_crtc_free_hw_state(crtc_state); |
| intel_crtc_state_reset(crtc_state, crtc); |
| |
| intel_crtc_get_pipe_config(crtc_state); |
| |
| crtc_state->hw.enable = crtc_state->hw.active; |
| |
| crtc->base.enabled = crtc_state->hw.enable; |
| crtc->active = crtc_state->hw.active; |
| |
| if (crtc_state->hw.active) |
| active_pipes |= BIT(crtc->pipe); |
| |
| drm_dbg_kms(&i915->drm, |
| "[CRTC:%d:%s] hw state readout: %s\n", |
| crtc->base.base.id, crtc->base.name, |
| str_enabled_disabled(crtc_state->hw.active)); |
| } |
| |
| cdclk_state->active_pipes = active_pipes; |
| dbuf_state->active_pipes = active_pipes; |
| |
| readout_plane_state(i915); |
| |
| for_each_intel_encoder(&i915->drm, encoder) { |
| struct intel_crtc_state *crtc_state = NULL; |
| |
| pipe = 0; |
| |
| if (encoder->get_hw_state(encoder, &pipe)) { |
| crtc = intel_crtc_for_pipe(i915, pipe); |
| crtc_state = to_intel_crtc_state(crtc->base.state); |
| |
| encoder->base.crtc = &crtc->base; |
| intel_encoder_get_config(encoder, crtc_state); |
| |
| /* read out to slave crtc as well for bigjoiner */ |
| if (crtc_state->bigjoiner_pipes) { |
| struct intel_crtc *slave_crtc; |
| |
| /* encoder should read be linked to bigjoiner master */ |
| WARN_ON(intel_crtc_is_bigjoiner_slave(crtc_state)); |
| |
| for_each_intel_crtc_in_pipe_mask(&i915->drm, slave_crtc, |
| intel_crtc_bigjoiner_slave_pipes(crtc_state)) { |
| struct intel_crtc_state *slave_crtc_state; |
| |
| slave_crtc_state = to_intel_crtc_state(slave_crtc->base.state); |
| intel_encoder_get_config(encoder, slave_crtc_state); |
| } |
| } |
| |
| intel_pmdemand_update_phys_mask(i915, encoder, |
| pmdemand_state, |
| true); |
| } else { |
| intel_pmdemand_update_phys_mask(i915, encoder, |
| pmdemand_state, |
| false); |
| |
| encoder->base.crtc = NULL; |
| } |
| |
| if (encoder->sync_state) |
| encoder->sync_state(encoder, crtc_state); |
| |
| drm_dbg_kms(&i915->drm, |
| "[ENCODER:%d:%s] hw state readout: %s, pipe %c\n", |
| encoder->base.base.id, encoder->base.name, |
| str_enabled_disabled(encoder->base.crtc), |
| pipe_name(pipe)); |
| } |
| |
| intel_dpll_readout_hw_state(i915); |
| |
| drm_connector_list_iter_begin(&i915->drm, &conn_iter); |
| for_each_intel_connector_iter(connector, &conn_iter) { |
| struct intel_crtc_state *crtc_state = NULL; |
| |
| if (connector->get_hw_state(connector)) { |
| struct intel_crtc *crtc; |
| |
| connector->base.dpms = DRM_MODE_DPMS_ON; |
| |
| encoder = intel_attached_encoder(connector); |
| connector->base.encoder = &encoder->base; |
| |
| crtc = to_intel_crtc(encoder->base.crtc); |
| crtc_state = crtc ? to_intel_crtc_state(crtc->base.state) : NULL; |
| |
| if (crtc_state && crtc_state->hw.active) { |
| /* |
| * This has to be done during hardware readout |
| * because anything calling .crtc_disable may |
| * rely on the connector_mask being accurate. |
| */ |
| crtc_state->uapi.connector_mask |= |
| drm_connector_mask(&connector->base); |
| crtc_state->uapi.encoder_mask |= |
| drm_encoder_mask(&encoder->base); |
| } |
| } else { |
| connector->base.dpms = DRM_MODE_DPMS_OFF; |
| connector->base.encoder = NULL; |
| } |
| |
| if (connector->sync_state) |
| connector->sync_state(connector, crtc_state); |
| |
| drm_dbg_kms(&i915->drm, |
| "[CONNECTOR:%d:%s] hw state readout: %s\n", |
| connector->base.base.id, connector->base.name, |
| str_enabled_disabled(connector->base.encoder)); |
| } |
| drm_connector_list_iter_end(&conn_iter); |
| |
| for_each_intel_crtc(&i915->drm, crtc) { |
| struct intel_bw_state *bw_state = |
| to_intel_bw_state(i915->display.bw.obj.state); |
| struct intel_crtc_state *crtc_state = |
| to_intel_crtc_state(crtc->base.state); |
| struct intel_plane *plane; |
| int min_cdclk = 0; |
| |
| if (crtc_state->hw.active) { |
| /* |
| * The initial mode needs to be set in order to keep |
| * the atomic core happy. It wants a valid mode if the |
| * crtc's enabled, so we do the above call. |
| * |
| * But we don't set all the derived state fully, hence |
| * set a flag to indicate that a full recalculation is |
| * needed on the next commit. |
| */ |
| crtc_state->inherited = true; |
| |
| intel_crtc_update_active_timings(crtc_state, |
| crtc_state->vrr.enable); |
| |
| intel_crtc_copy_hw_to_uapi_state(crtc_state); |
| } |
| |
| for_each_intel_plane_on_crtc(&i915->drm, crtc, plane) { |
| const struct intel_plane_state *plane_state = |
| to_intel_plane_state(plane->base.state); |
| |
| /* |
| * FIXME don't have the fb yet, so can't |
| * use intel_plane_data_rate() :( |
| */ |
| if (plane_state->uapi.visible) |
| crtc_state->data_rate[plane->id] = |
| 4 * crtc_state->pixel_rate; |
| /* |
| * FIXME don't have the fb yet, so can't |
| * use plane->min_cdclk() :( |
| */ |
| if (plane_state->uapi.visible && plane->min_cdclk) { |
| if (crtc_state->double_wide || DISPLAY_VER(i915) >= 10) |
| crtc_state->min_cdclk[plane->id] = |
| DIV_ROUND_UP(crtc_state->pixel_rate, 2); |
| else |
| crtc_state->min_cdclk[plane->id] = |
| crtc_state->pixel_rate; |
| } |
| drm_dbg_kms(&i915->drm, |
| "[PLANE:%d:%s] min_cdclk %d kHz\n", |
| plane->base.base.id, plane->base.name, |
| crtc_state->min_cdclk[plane->id]); |
| } |
| |
| if (crtc_state->hw.active) { |
| min_cdclk = intel_crtc_compute_min_cdclk(crtc_state); |
| if (drm_WARN_ON(&i915->drm, min_cdclk < 0)) |
| min_cdclk = 0; |
| } |
| |
| cdclk_state->min_cdclk[crtc->pipe] = min_cdclk; |
| cdclk_state->min_voltage_level[crtc->pipe] = |
| crtc_state->min_voltage_level; |
| |
| intel_pmdemand_update_port_clock(i915, pmdemand_state, pipe, |
| crtc_state->port_clock); |
| |
| intel_bw_crtc_update(bw_state, crtc_state); |
| } |
| |
| intel_pmdemand_init_pmdemand_params(i915, pmdemand_state); |
| } |
| |
| static void |
| get_encoder_power_domains(struct drm_i915_private *i915) |
| { |
| struct intel_encoder *encoder; |
| |
| for_each_intel_encoder(&i915->drm, encoder) { |
| struct intel_crtc_state *crtc_state; |
| |
| if (!encoder->get_power_domains) |
| continue; |
| |
| /* |
| * MST-primary and inactive encoders don't have a crtc state |
| * and neither of these require any power domain references. |
| */ |
| if (!encoder->base.crtc) |
| continue; |
| |
| crtc_state = to_intel_crtc_state(encoder->base.crtc->state); |
| encoder->get_power_domains(encoder, crtc_state); |
| } |
| } |
| |
| static void intel_early_display_was(struct drm_i915_private *i915) |
| { |
| /* |
| * Display WA #1185 WaDisableDARBFClkGating:glk,icl,ehl,tgl |
| * Also known as Wa_14010480278. |
| */ |
| if (IS_DISPLAY_VER(i915, 10, 12)) |
| intel_de_rmw(i915, GEN9_CLKGATE_DIS_0, 0, DARBF_GATING_DIS); |
| |
| /* |
| * WaRsPkgCStateDisplayPMReq:hsw |
| * System hang if this isn't done before disabling all planes! |
| */ |
| if (IS_HASWELL(i915)) |
| intel_de_rmw(i915, CHICKEN_PAR1_1, 0, FORCE_ARB_IDLE_PLANES); |
| |
| if (IS_KABYLAKE(i915) || IS_COFFEELAKE(i915) || IS_COMETLAKE(i915)) { |
| /* Display WA #1142:kbl,cfl,cml */ |
| intel_de_rmw(i915, CHICKEN_PAR1_1, |
| KBL_ARB_FILL_SPARE_22, KBL_ARB_FILL_SPARE_22); |
| intel_de_rmw(i915, CHICKEN_MISC_2, |
| KBL_ARB_FILL_SPARE_13 | KBL_ARB_FILL_SPARE_14, |
| KBL_ARB_FILL_SPARE_14); |
| } |
| } |
| |
| void intel_modeset_setup_hw_state(struct drm_i915_private *i915, |
| struct drm_modeset_acquire_ctx *ctx) |
| { |
| struct intel_encoder *encoder; |
| struct intel_crtc *crtc; |
| intel_wakeref_t wakeref; |
| |
| wakeref = intel_display_power_get(i915, POWER_DOMAIN_INIT); |
| |
| intel_early_display_was(i915); |
| intel_modeset_readout_hw_state(i915); |
| |
| /* HW state is read out, now we need to sanitize this mess. */ |
| get_encoder_power_domains(i915); |
| |
| intel_pch_sanitize(i915); |
| |
| /* |
| * intel_sanitize_plane_mapping() may need to do vblank |
| * waits, so we need vblank interrupts restored beforehand. |
| */ |
| for_each_intel_crtc(&i915->drm, crtc) { |
| struct intel_crtc_state *crtc_state = |
| to_intel_crtc_state(crtc->base.state); |
| |
| intel_sanitize_fifo_underrun_reporting(crtc_state); |
| |
| drm_crtc_vblank_reset(&crtc->base); |
| |
| if (crtc_state->hw.active) { |
| intel_dmc_enable_pipe(i915, crtc->pipe); |
| intel_crtc_vblank_on(crtc_state); |
| } |
| } |
| |
| intel_fbc_sanitize(i915); |
| |
| intel_sanitize_plane_mapping(i915); |
| |
| for_each_intel_encoder(&i915->drm, encoder) |
| intel_sanitize_encoder(encoder); |
| |
| /* |
| * Sanitizing CRTCs needs their connector atomic state to be |
| * up-to-date, so ensure that already here. |
| */ |
| intel_modeset_update_connector_atomic_state(i915); |
| |
| intel_sanitize_all_crtcs(i915, ctx); |
| |
| intel_dpll_sanitize_state(i915); |
| |
| intel_wm_get_hw_state(i915); |
| |
| for_each_intel_crtc(&i915->drm, crtc) { |
| struct intel_crtc_state *crtc_state = |
| to_intel_crtc_state(crtc->base.state); |
| struct intel_power_domain_mask put_domains; |
| |
| intel_modeset_get_crtc_power_domains(crtc_state, &put_domains); |
| if (drm_WARN_ON(&i915->drm, !bitmap_empty(put_domains.bits, POWER_DOMAIN_NUM))) |
| intel_modeset_put_crtc_power_domains(crtc, &put_domains); |
| } |
| |
| intel_display_power_put(i915, POWER_DOMAIN_INIT, wakeref); |
| |
| intel_power_domains_sanitize_state(i915); |
| } |