| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Loongson PCI Host Controller Driver |
| * |
| * Copyright (C) 2020 Jiaxun Yang <jiaxun.yang@flygoat.com> |
| */ |
| |
| #include <linux/of.h> |
| #include <linux/of_pci.h> |
| #include <linux/pci.h> |
| #include <linux/pci_ids.h> |
| #include <linux/pci-acpi.h> |
| #include <linux/pci-ecam.h> |
| |
| #include "../pci.h" |
| |
| /* Device IDs */ |
| #define DEV_LS2K_PCIE_PORT0 0x1a05 |
| #define DEV_LS7A_PCIE_PORT0 0x7a09 |
| #define DEV_LS7A_PCIE_PORT1 0x7a19 |
| #define DEV_LS7A_PCIE_PORT2 0x7a29 |
| #define DEV_LS7A_PCIE_PORT3 0x7a39 |
| #define DEV_LS7A_PCIE_PORT4 0x7a49 |
| #define DEV_LS7A_PCIE_PORT5 0x7a59 |
| #define DEV_LS7A_PCIE_PORT6 0x7a69 |
| |
| #define DEV_LS2K_APB 0x7a02 |
| #define DEV_LS7A_GMAC 0x7a03 |
| #define DEV_LS7A_DC1 0x7a06 |
| #define DEV_LS7A_LPC 0x7a0c |
| #define DEV_LS7A_AHCI 0x7a08 |
| #define DEV_LS7A_CONF 0x7a10 |
| #define DEV_LS7A_GNET 0x7a13 |
| #define DEV_LS7A_EHCI 0x7a14 |
| #define DEV_LS7A_DC2 0x7a36 |
| #define DEV_LS7A_HDMI 0x7a37 |
| |
| #define FLAG_CFG0 BIT(0) |
| #define FLAG_CFG1 BIT(1) |
| #define FLAG_DEV_FIX BIT(2) |
| #define FLAG_DEV_HIDDEN BIT(3) |
| |
| struct loongson_pci_data { |
| u32 flags; |
| struct pci_ops *ops; |
| }; |
| |
| struct loongson_pci { |
| void __iomem *cfg0_base; |
| void __iomem *cfg1_base; |
| struct platform_device *pdev; |
| const struct loongson_pci_data *data; |
| }; |
| |
| /* Fixup wrong class code in PCIe bridges */ |
| static void bridge_class_quirk(struct pci_dev *dev) |
| { |
| dev->class = PCI_CLASS_BRIDGE_PCI_NORMAL; |
| } |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, |
| DEV_LS7A_PCIE_PORT0, bridge_class_quirk); |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, |
| DEV_LS7A_PCIE_PORT1, bridge_class_quirk); |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, |
| DEV_LS7A_PCIE_PORT2, bridge_class_quirk); |
| |
| static void system_bus_quirk(struct pci_dev *pdev) |
| { |
| /* |
| * The address space consumed by these devices is outside the |
| * resources of the host bridge. |
| */ |
| pdev->mmio_always_on = 1; |
| pdev->non_compliant_bars = 1; |
| } |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, |
| DEV_LS2K_APB, system_bus_quirk); |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, |
| DEV_LS7A_CONF, system_bus_quirk); |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, |
| DEV_LS7A_LPC, system_bus_quirk); |
| |
| /* |
| * Some Loongson PCIe ports have hardware limitations on their Maximum Read |
| * Request Size. They can't handle anything larger than this. Sane |
| * firmware will set proper MRRS at boot, so we only need no_inc_mrrs for |
| * bridges. However, some MIPS Loongson firmware doesn't set MRRS properly, |
| * so we have to enforce maximum safe MRRS, which is 256 bytes. |
| */ |
| #ifdef CONFIG_MIPS |
| static void loongson_set_min_mrrs_quirk(struct pci_dev *pdev) |
| { |
| struct pci_bus *bus = pdev->bus; |
| struct pci_dev *bridge; |
| static const struct pci_device_id bridge_devids[] = { |
| { PCI_VDEVICE(LOONGSON, DEV_LS2K_PCIE_PORT0) }, |
| { PCI_VDEVICE(LOONGSON, DEV_LS7A_PCIE_PORT0) }, |
| { PCI_VDEVICE(LOONGSON, DEV_LS7A_PCIE_PORT1) }, |
| { PCI_VDEVICE(LOONGSON, DEV_LS7A_PCIE_PORT2) }, |
| { PCI_VDEVICE(LOONGSON, DEV_LS7A_PCIE_PORT3) }, |
| { PCI_VDEVICE(LOONGSON, DEV_LS7A_PCIE_PORT4) }, |
| { PCI_VDEVICE(LOONGSON, DEV_LS7A_PCIE_PORT5) }, |
| { PCI_VDEVICE(LOONGSON, DEV_LS7A_PCIE_PORT6) }, |
| { 0, }, |
| }; |
| |
| /* look for the matching bridge */ |
| while (!pci_is_root_bus(bus)) { |
| bridge = bus->self; |
| bus = bus->parent; |
| |
| if (pci_match_id(bridge_devids, bridge)) { |
| if (pcie_get_readrq(pdev) > 256) { |
| pci_info(pdev, "limiting MRRS to 256\n"); |
| pcie_set_readrq(pdev, 256); |
| } |
| break; |
| } |
| } |
| } |
| DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, loongson_set_min_mrrs_quirk); |
| #endif |
| |
| static void loongson_mrrs_quirk(struct pci_dev *pdev) |
| { |
| struct pci_host_bridge *bridge = pci_find_host_bridge(pdev->bus); |
| |
| bridge->no_inc_mrrs = 1; |
| } |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, |
| DEV_LS2K_PCIE_PORT0, loongson_mrrs_quirk); |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, |
| DEV_LS7A_PCIE_PORT0, loongson_mrrs_quirk); |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, |
| DEV_LS7A_PCIE_PORT1, loongson_mrrs_quirk); |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, |
| DEV_LS7A_PCIE_PORT2, loongson_mrrs_quirk); |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, |
| DEV_LS7A_PCIE_PORT3, loongson_mrrs_quirk); |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, |
| DEV_LS7A_PCIE_PORT4, loongson_mrrs_quirk); |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, |
| DEV_LS7A_PCIE_PORT5, loongson_mrrs_quirk); |
| DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, |
| DEV_LS7A_PCIE_PORT6, loongson_mrrs_quirk); |
| |
| static void loongson_pci_pin_quirk(struct pci_dev *pdev) |
| { |
| pdev->pin = 1 + (PCI_FUNC(pdev->devfn) & 3); |
| } |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LOONGSON, |
| DEV_LS7A_DC1, loongson_pci_pin_quirk); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LOONGSON, |
| DEV_LS7A_DC2, loongson_pci_pin_quirk); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LOONGSON, |
| DEV_LS7A_GMAC, loongson_pci_pin_quirk); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LOONGSON, |
| DEV_LS7A_AHCI, loongson_pci_pin_quirk); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LOONGSON, |
| DEV_LS7A_EHCI, loongson_pci_pin_quirk); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LOONGSON, |
| DEV_LS7A_GNET, loongson_pci_pin_quirk); |
| DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LOONGSON, |
| DEV_LS7A_HDMI, loongson_pci_pin_quirk); |
| |
| static struct loongson_pci *pci_bus_to_loongson_pci(struct pci_bus *bus) |
| { |
| struct pci_config_window *cfg; |
| |
| if (acpi_disabled) |
| return (struct loongson_pci *)(bus->sysdata); |
| |
| cfg = bus->sysdata; |
| return (struct loongson_pci *)(cfg->priv); |
| } |
| |
| static void __iomem *cfg0_map(struct loongson_pci *priv, struct pci_bus *bus, |
| unsigned int devfn, int where) |
| { |
| unsigned long addroff = 0x0; |
| unsigned char busnum = bus->number; |
| |
| if (!pci_is_root_bus(bus)) { |
| addroff |= BIT(24); /* Type 1 Access */ |
| addroff |= (busnum << 16); |
| } |
| addroff |= (devfn << 8) | where; |
| return priv->cfg0_base + addroff; |
| } |
| |
| static void __iomem *cfg1_map(struct loongson_pci *priv, struct pci_bus *bus, |
| unsigned int devfn, int where) |
| { |
| unsigned long addroff = 0x0; |
| unsigned char busnum = bus->number; |
| |
| if (!pci_is_root_bus(bus)) { |
| addroff |= BIT(28); /* Type 1 Access */ |
| addroff |= (busnum << 16); |
| } |
| addroff |= (devfn << 8) | (where & 0xff) | ((where & 0xf00) << 16); |
| return priv->cfg1_base + addroff; |
| } |
| |
| static bool pdev_may_exist(struct pci_bus *bus, unsigned int device, |
| unsigned int function) |
| { |
| return !(pci_is_root_bus(bus) && |
| (device >= 9 && device <= 20) && (function > 0)); |
| } |
| |
| static void __iomem *pci_loongson_map_bus(struct pci_bus *bus, |
| unsigned int devfn, int where) |
| { |
| unsigned int device = PCI_SLOT(devfn); |
| unsigned int function = PCI_FUNC(devfn); |
| struct loongson_pci *priv = pci_bus_to_loongson_pci(bus); |
| |
| /* |
| * Do not read more than one device on the bus other than |
| * the host bus. |
| */ |
| if ((priv->data->flags & FLAG_DEV_FIX) && bus->self) { |
| if (!pci_is_root_bus(bus) && (device > 0)) |
| return NULL; |
| } |
| |
| /* Don't access non-existent devices */ |
| if (priv->data->flags & FLAG_DEV_HIDDEN) { |
| if (!pdev_may_exist(bus, device, function)) |
| return NULL; |
| } |
| |
| /* CFG0 can only access standard space */ |
| if (where < PCI_CFG_SPACE_SIZE && priv->cfg0_base) |
| return cfg0_map(priv, bus, devfn, where); |
| |
| /* CFG1 can access extended space */ |
| if (where < PCI_CFG_SPACE_EXP_SIZE && priv->cfg1_base) |
| return cfg1_map(priv, bus, devfn, where); |
| |
| return NULL; |
| } |
| |
| #ifdef CONFIG_OF |
| |
| static int loongson_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) |
| { |
| int irq; |
| u8 val; |
| |
| irq = of_irq_parse_and_map_pci(dev, slot, pin); |
| if (irq > 0) |
| return irq; |
| |
| /* Care i8259 legacy systems */ |
| pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &val); |
| /* i8259 only have 15 IRQs */ |
| if (val > 15) |
| return 0; |
| |
| return val; |
| } |
| |
| /* LS2K/LS7A accept 8/16/32-bit PCI config operations */ |
| static struct pci_ops loongson_pci_ops = { |
| .map_bus = pci_loongson_map_bus, |
| .read = pci_generic_config_read, |
| .write = pci_generic_config_write, |
| }; |
| |
| /* RS780/SR5690 only accept 32-bit PCI config operations */ |
| static struct pci_ops loongson_pci_ops32 = { |
| .map_bus = pci_loongson_map_bus, |
| .read = pci_generic_config_read32, |
| .write = pci_generic_config_write32, |
| }; |
| |
| static const struct loongson_pci_data ls2k_pci_data = { |
| .flags = FLAG_CFG1 | FLAG_DEV_FIX | FLAG_DEV_HIDDEN, |
| .ops = &loongson_pci_ops, |
| }; |
| |
| static const struct loongson_pci_data ls7a_pci_data = { |
| .flags = FLAG_CFG1 | FLAG_DEV_FIX | FLAG_DEV_HIDDEN, |
| .ops = &loongson_pci_ops, |
| }; |
| |
| static const struct loongson_pci_data rs780e_pci_data = { |
| .flags = FLAG_CFG0, |
| .ops = &loongson_pci_ops32, |
| }; |
| |
| static const struct of_device_id loongson_pci_of_match[] = { |
| { .compatible = "loongson,ls2k-pci", |
| .data = &ls2k_pci_data, }, |
| { .compatible = "loongson,ls7a-pci", |
| .data = &ls7a_pci_data, }, |
| { .compatible = "loongson,rs780e-pci", |
| .data = &rs780e_pci_data, }, |
| {} |
| }; |
| |
| static int loongson_pci_probe(struct platform_device *pdev) |
| { |
| struct loongson_pci *priv; |
| struct device *dev = &pdev->dev; |
| struct device_node *node = dev->of_node; |
| struct pci_host_bridge *bridge; |
| struct resource *regs; |
| |
| if (!node) |
| return -ENODEV; |
| |
| bridge = devm_pci_alloc_host_bridge(dev, sizeof(*priv)); |
| if (!bridge) |
| return -ENODEV; |
| |
| priv = pci_host_bridge_priv(bridge); |
| priv->pdev = pdev; |
| priv->data = of_device_get_match_data(dev); |
| |
| if (priv->data->flags & FLAG_CFG0) { |
| regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!regs) |
| dev_err(dev, "missing mem resources for cfg0\n"); |
| else { |
| priv->cfg0_base = devm_pci_remap_cfg_resource(dev, regs); |
| if (IS_ERR(priv->cfg0_base)) |
| return PTR_ERR(priv->cfg0_base); |
| } |
| } |
| |
| if (priv->data->flags & FLAG_CFG1) { |
| regs = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| if (!regs) |
| dev_info(dev, "missing mem resource for cfg1\n"); |
| else { |
| priv->cfg1_base = devm_pci_remap_cfg_resource(dev, regs); |
| if (IS_ERR(priv->cfg1_base)) |
| priv->cfg1_base = NULL; |
| } |
| } |
| |
| bridge->sysdata = priv; |
| bridge->ops = priv->data->ops; |
| bridge->map_irq = loongson_map_irq; |
| |
| return pci_host_probe(bridge); |
| } |
| |
| static struct platform_driver loongson_pci_driver = { |
| .driver = { |
| .name = "loongson-pci", |
| .of_match_table = loongson_pci_of_match, |
| }, |
| .probe = loongson_pci_probe, |
| }; |
| builtin_platform_driver(loongson_pci_driver); |
| |
| #endif |
| |
| #ifdef CONFIG_ACPI |
| |
| static int loongson_pci_ecam_init(struct pci_config_window *cfg) |
| { |
| struct device *dev = cfg->parent; |
| struct loongson_pci *priv; |
| struct loongson_pci_data *data; |
| |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| cfg->priv = priv; |
| data->flags = FLAG_CFG1 | FLAG_DEV_HIDDEN; |
| priv->data = data; |
| priv->cfg1_base = cfg->win - (cfg->busr.start << 16); |
| |
| return 0; |
| } |
| |
| const struct pci_ecam_ops loongson_pci_ecam_ops = { |
| .bus_shift = 16, |
| .init = loongson_pci_ecam_init, |
| .pci_ops = { |
| .map_bus = pci_loongson_map_bus, |
| .read = pci_generic_config_read, |
| .write = pci_generic_config_write, |
| } |
| }; |
| |
| #endif |