| /* |
| * ACPI support for Intel Lynxpoint LPSS. |
| * |
| * Copyright (C) 2013, Intel Corporation |
| * Authors: Mika Westerberg <mika.westerberg@linux.intel.com> |
| * Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/acpi.h> |
| #include <linux/clkdev.h> |
| #include <linux/clk-provider.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/mutex.h> |
| #include <linux/platform_device.h> |
| #include <linux/platform_data/clk-lpss.h> |
| #include <linux/platform_data/x86/pmc_atom.h> |
| #include <linux/pm_domain.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/pwm.h> |
| #include <linux/delay.h> |
| |
| #include "internal.h" |
| |
| ACPI_MODULE_NAME("acpi_lpss"); |
| |
| #ifdef CONFIG_X86_INTEL_LPSS |
| |
| #include <asm/cpu_device_id.h> |
| #include <asm/intel-family.h> |
| #include <asm/iosf_mbi.h> |
| |
| #define LPSS_ADDR(desc) ((unsigned long)&desc) |
| |
| #define LPSS_CLK_SIZE 0x04 |
| #define LPSS_LTR_SIZE 0x18 |
| |
| /* Offsets relative to LPSS_PRIVATE_OFFSET */ |
| #define LPSS_CLK_DIVIDER_DEF_MASK (BIT(1) | BIT(16)) |
| #define LPSS_RESETS 0x04 |
| #define LPSS_RESETS_RESET_FUNC BIT(0) |
| #define LPSS_RESETS_RESET_APB BIT(1) |
| #define LPSS_GENERAL 0x08 |
| #define LPSS_GENERAL_LTR_MODE_SW BIT(2) |
| #define LPSS_GENERAL_UART_RTS_OVRD BIT(3) |
| #define LPSS_SW_LTR 0x10 |
| #define LPSS_AUTO_LTR 0x14 |
| #define LPSS_LTR_SNOOP_REQ BIT(15) |
| #define LPSS_LTR_SNOOP_MASK 0x0000FFFF |
| #define LPSS_LTR_SNOOP_LAT_1US 0x800 |
| #define LPSS_LTR_SNOOP_LAT_32US 0xC00 |
| #define LPSS_LTR_SNOOP_LAT_SHIFT 5 |
| #define LPSS_LTR_SNOOP_LAT_CUTOFF 3000 |
| #define LPSS_LTR_MAX_VAL 0x3FF |
| #define LPSS_TX_INT 0x20 |
| #define LPSS_TX_INT_MASK BIT(1) |
| |
| #define LPSS_PRV_REG_COUNT 9 |
| |
| /* LPSS Flags */ |
| #define LPSS_CLK BIT(0) |
| #define LPSS_CLK_GATE BIT(1) |
| #define LPSS_CLK_DIVIDER BIT(2) |
| #define LPSS_LTR BIT(3) |
| #define LPSS_SAVE_CTX BIT(4) |
| #define LPSS_NO_D3_DELAY BIT(5) |
| |
| /* Crystal Cove PMIC shares same ACPI ID between different platforms */ |
| #define BYT_CRC_HRV 2 |
| #define CHT_CRC_HRV 3 |
| |
| struct lpss_private_data; |
| |
| struct lpss_device_desc { |
| unsigned int flags; |
| const char *clk_con_id; |
| unsigned int prv_offset; |
| size_t prv_size_override; |
| struct property_entry *properties; |
| void (*setup)(struct lpss_private_data *pdata); |
| }; |
| |
| static const struct lpss_device_desc lpss_dma_desc = { |
| .flags = LPSS_CLK, |
| }; |
| |
| struct lpss_private_data { |
| struct acpi_device *adev; |
| void __iomem *mmio_base; |
| resource_size_t mmio_size; |
| unsigned int fixed_clk_rate; |
| struct clk *clk; |
| const struct lpss_device_desc *dev_desc; |
| u32 prv_reg_ctx[LPSS_PRV_REG_COUNT]; |
| }; |
| |
| /* LPSS run time quirks */ |
| static unsigned int lpss_quirks; |
| |
| /* |
| * LPSS_QUIRK_ALWAYS_POWER_ON: override power state for LPSS DMA device. |
| * |
| * The LPSS DMA controller has neither _PS0 nor _PS3 method. Moreover |
| * it can be powered off automatically whenever the last LPSS device goes down. |
| * In case of no power any access to the DMA controller will hang the system. |
| * The behaviour is reproduced on some HP laptops based on Intel BayTrail as |
| * well as on ASuS T100TA transformer. |
| * |
| * This quirk overrides power state of entire LPSS island to keep DMA powered |
| * on whenever we have at least one other device in use. |
| */ |
| #define LPSS_QUIRK_ALWAYS_POWER_ON BIT(0) |
| |
| /* UART Component Parameter Register */ |
| #define LPSS_UART_CPR 0xF4 |
| #define LPSS_UART_CPR_AFCE BIT(4) |
| |
| static void lpss_uart_setup(struct lpss_private_data *pdata) |
| { |
| unsigned int offset; |
| u32 val; |
| |
| offset = pdata->dev_desc->prv_offset + LPSS_TX_INT; |
| val = readl(pdata->mmio_base + offset); |
| writel(val | LPSS_TX_INT_MASK, pdata->mmio_base + offset); |
| |
| val = readl(pdata->mmio_base + LPSS_UART_CPR); |
| if (!(val & LPSS_UART_CPR_AFCE)) { |
| offset = pdata->dev_desc->prv_offset + LPSS_GENERAL; |
| val = readl(pdata->mmio_base + offset); |
| val |= LPSS_GENERAL_UART_RTS_OVRD; |
| writel(val, pdata->mmio_base + offset); |
| } |
| } |
| |
| static void lpss_deassert_reset(struct lpss_private_data *pdata) |
| { |
| unsigned int offset; |
| u32 val; |
| |
| offset = pdata->dev_desc->prv_offset + LPSS_RESETS; |
| val = readl(pdata->mmio_base + offset); |
| val |= LPSS_RESETS_RESET_APB | LPSS_RESETS_RESET_FUNC; |
| writel(val, pdata->mmio_base + offset); |
| } |
| |
| /* |
| * BYT PWM used for backlight control by the i915 driver on systems without |
| * the Crystal Cove PMIC. |
| */ |
| static struct pwm_lookup byt_pwm_lookup[] = { |
| PWM_LOOKUP_WITH_MODULE("80860F09:00", 0, "0000:00:02.0", |
| "pwm_backlight", 0, PWM_POLARITY_NORMAL, |
| "pwm-lpss-platform"), |
| }; |
| |
| static void byt_pwm_setup(struct lpss_private_data *pdata) |
| { |
| struct acpi_device *adev = pdata->adev; |
| |
| /* Only call pwm_add_table for the first PWM controller */ |
| if (!adev->pnp.unique_id || strcmp(adev->pnp.unique_id, "1")) |
| return; |
| |
| if (!acpi_dev_present("INT33FD", NULL, BYT_CRC_HRV)) |
| pwm_add_table(byt_pwm_lookup, ARRAY_SIZE(byt_pwm_lookup)); |
| } |
| |
| #define LPSS_I2C_ENABLE 0x6c |
| |
| static void byt_i2c_setup(struct lpss_private_data *pdata) |
| { |
| lpss_deassert_reset(pdata); |
| |
| if (readl(pdata->mmio_base + pdata->dev_desc->prv_offset)) |
| pdata->fixed_clk_rate = 133000000; |
| |
| writel(0, pdata->mmio_base + LPSS_I2C_ENABLE); |
| } |
| |
| /* BSW PWM used for backlight control by the i915 driver */ |
| static struct pwm_lookup bsw_pwm_lookup[] = { |
| PWM_LOOKUP_WITH_MODULE("80862288:00", 0, "0000:00:02.0", |
| "pwm_backlight", 0, PWM_POLARITY_NORMAL, |
| "pwm-lpss-platform"), |
| }; |
| |
| static void bsw_pwm_setup(struct lpss_private_data *pdata) |
| { |
| struct acpi_device *adev = pdata->adev; |
| |
| /* Only call pwm_add_table for the first PWM controller */ |
| if (!adev->pnp.unique_id || strcmp(adev->pnp.unique_id, "1")) |
| return; |
| |
| pwm_add_table(bsw_pwm_lookup, ARRAY_SIZE(bsw_pwm_lookup)); |
| } |
| |
| static const struct lpss_device_desc lpt_dev_desc = { |
| .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR, |
| .prv_offset = 0x800, |
| }; |
| |
| static const struct lpss_device_desc lpt_i2c_dev_desc = { |
| .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_LTR, |
| .prv_offset = 0x800, |
| }; |
| |
| static struct property_entry uart_properties[] = { |
| PROPERTY_ENTRY_U32("reg-io-width", 4), |
| PROPERTY_ENTRY_U32("reg-shift", 2), |
| PROPERTY_ENTRY_BOOL("snps,uart-16550-compatible"), |
| { }, |
| }; |
| |
| static const struct lpss_device_desc lpt_uart_dev_desc = { |
| .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR, |
| .clk_con_id = "baudclk", |
| .prv_offset = 0x800, |
| .setup = lpss_uart_setup, |
| .properties = uart_properties, |
| }; |
| |
| static const struct lpss_device_desc lpt_sdio_dev_desc = { |
| .flags = LPSS_LTR, |
| .prv_offset = 0x1000, |
| .prv_size_override = 0x1018, |
| }; |
| |
| static const struct lpss_device_desc byt_pwm_dev_desc = { |
| .flags = LPSS_SAVE_CTX, |
| .setup = byt_pwm_setup, |
| }; |
| |
| static const struct lpss_device_desc bsw_pwm_dev_desc = { |
| .flags = LPSS_SAVE_CTX | LPSS_NO_D3_DELAY, |
| .setup = bsw_pwm_setup, |
| }; |
| |
| static const struct lpss_device_desc byt_uart_dev_desc = { |
| .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX, |
| .clk_con_id = "baudclk", |
| .prv_offset = 0x800, |
| .setup = lpss_uart_setup, |
| .properties = uart_properties, |
| }; |
| |
| static const struct lpss_device_desc bsw_uart_dev_desc = { |
| .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX |
| | LPSS_NO_D3_DELAY, |
| .clk_con_id = "baudclk", |
| .prv_offset = 0x800, |
| .setup = lpss_uart_setup, |
| .properties = uart_properties, |
| }; |
| |
| static const struct lpss_device_desc byt_spi_dev_desc = { |
| .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX, |
| .prv_offset = 0x400, |
| }; |
| |
| static const struct lpss_device_desc byt_sdio_dev_desc = { |
| .flags = LPSS_CLK, |
| }; |
| |
| static const struct lpss_device_desc byt_i2c_dev_desc = { |
| .flags = LPSS_CLK | LPSS_SAVE_CTX, |
| .prv_offset = 0x800, |
| .setup = byt_i2c_setup, |
| }; |
| |
| static const struct lpss_device_desc bsw_i2c_dev_desc = { |
| .flags = LPSS_CLK | LPSS_SAVE_CTX | LPSS_NO_D3_DELAY, |
| .prv_offset = 0x800, |
| .setup = byt_i2c_setup, |
| }; |
| |
| static const struct lpss_device_desc bsw_spi_dev_desc = { |
| .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX |
| | LPSS_NO_D3_DELAY, |
| .prv_offset = 0x400, |
| .setup = lpss_deassert_reset, |
| }; |
| |
| #define ICPU(model) { X86_VENDOR_INTEL, 6, model, X86_FEATURE_ANY, } |
| |
| static const struct x86_cpu_id lpss_cpu_ids[] = { |
| ICPU(INTEL_FAM6_ATOM_SILVERMONT1), /* Valleyview, Bay Trail */ |
| ICPU(INTEL_FAM6_ATOM_AIRMONT), /* Braswell, Cherry Trail */ |
| {} |
| }; |
| |
| #else |
| |
| #define LPSS_ADDR(desc) (0UL) |
| |
| #endif /* CONFIG_X86_INTEL_LPSS */ |
| |
| static const struct acpi_device_id acpi_lpss_device_ids[] = { |
| /* Generic LPSS devices */ |
| { "INTL9C60", LPSS_ADDR(lpss_dma_desc) }, |
| |
| /* Lynxpoint LPSS devices */ |
| { "INT33C0", LPSS_ADDR(lpt_dev_desc) }, |
| { "INT33C1", LPSS_ADDR(lpt_dev_desc) }, |
| { "INT33C2", LPSS_ADDR(lpt_i2c_dev_desc) }, |
| { "INT33C3", LPSS_ADDR(lpt_i2c_dev_desc) }, |
| { "INT33C4", LPSS_ADDR(lpt_uart_dev_desc) }, |
| { "INT33C5", LPSS_ADDR(lpt_uart_dev_desc) }, |
| { "INT33C6", LPSS_ADDR(lpt_sdio_dev_desc) }, |
| { "INT33C7", }, |
| |
| /* BayTrail LPSS devices */ |
| { "80860F09", LPSS_ADDR(byt_pwm_dev_desc) }, |
| { "80860F0A", LPSS_ADDR(byt_uart_dev_desc) }, |
| { "80860F0E", LPSS_ADDR(byt_spi_dev_desc) }, |
| { "80860F14", LPSS_ADDR(byt_sdio_dev_desc) }, |
| { "80860F41", LPSS_ADDR(byt_i2c_dev_desc) }, |
| { "INT33B2", }, |
| { "INT33FC", }, |
| |
| /* Braswell LPSS devices */ |
| { "80862288", LPSS_ADDR(bsw_pwm_dev_desc) }, |
| { "8086228A", LPSS_ADDR(bsw_uart_dev_desc) }, |
| { "8086228E", LPSS_ADDR(bsw_spi_dev_desc) }, |
| { "808622C1", LPSS_ADDR(bsw_i2c_dev_desc) }, |
| |
| /* Broadwell LPSS devices */ |
| { "INT3430", LPSS_ADDR(lpt_dev_desc) }, |
| { "INT3431", LPSS_ADDR(lpt_dev_desc) }, |
| { "INT3432", LPSS_ADDR(lpt_i2c_dev_desc) }, |
| { "INT3433", LPSS_ADDR(lpt_i2c_dev_desc) }, |
| { "INT3434", LPSS_ADDR(lpt_uart_dev_desc) }, |
| { "INT3435", LPSS_ADDR(lpt_uart_dev_desc) }, |
| { "INT3436", LPSS_ADDR(lpt_sdio_dev_desc) }, |
| { "INT3437", }, |
| |
| /* Wildcat Point LPSS devices */ |
| { "INT3438", LPSS_ADDR(lpt_dev_desc) }, |
| |
| { } |
| }; |
| |
| #ifdef CONFIG_X86_INTEL_LPSS |
| |
| static int is_memory(struct acpi_resource *res, void *not_used) |
| { |
| struct resource r; |
| return !acpi_dev_resource_memory(res, &r); |
| } |
| |
| /* LPSS main clock device. */ |
| static struct platform_device *lpss_clk_dev; |
| |
| static inline void lpt_register_clock_device(void) |
| { |
| lpss_clk_dev = platform_device_register_simple("clk-lpt", -1, NULL, 0); |
| } |
| |
| static int register_device_clock(struct acpi_device *adev, |
| struct lpss_private_data *pdata) |
| { |
| const struct lpss_device_desc *dev_desc = pdata->dev_desc; |
| const char *devname = dev_name(&adev->dev); |
| struct clk *clk; |
| struct lpss_clk_data *clk_data; |
| const char *parent, *clk_name; |
| void __iomem *prv_base; |
| |
| if (!lpss_clk_dev) |
| lpt_register_clock_device(); |
| |
| clk_data = platform_get_drvdata(lpss_clk_dev); |
| if (!clk_data) |
| return -ENODEV; |
| clk = clk_data->clk; |
| |
| if (!pdata->mmio_base |
| || pdata->mmio_size < dev_desc->prv_offset + LPSS_CLK_SIZE) |
| return -ENODATA; |
| |
| parent = clk_data->name; |
| prv_base = pdata->mmio_base + dev_desc->prv_offset; |
| |
| if (pdata->fixed_clk_rate) { |
| clk = clk_register_fixed_rate(NULL, devname, parent, 0, |
| pdata->fixed_clk_rate); |
| goto out; |
| } |
| |
| if (dev_desc->flags & LPSS_CLK_GATE) { |
| clk = clk_register_gate(NULL, devname, parent, 0, |
| prv_base, 0, 0, NULL); |
| parent = devname; |
| } |
| |
| if (dev_desc->flags & LPSS_CLK_DIVIDER) { |
| /* Prevent division by zero */ |
| if (!readl(prv_base)) |
| writel(LPSS_CLK_DIVIDER_DEF_MASK, prv_base); |
| |
| clk_name = kasprintf(GFP_KERNEL, "%s-div", devname); |
| if (!clk_name) |
| return -ENOMEM; |
| clk = clk_register_fractional_divider(NULL, clk_name, parent, |
| 0, prv_base, |
| 1, 15, 16, 15, 0, NULL); |
| parent = clk_name; |
| |
| clk_name = kasprintf(GFP_KERNEL, "%s-update", devname); |
| if (!clk_name) { |
| kfree(parent); |
| return -ENOMEM; |
| } |
| clk = clk_register_gate(NULL, clk_name, parent, |
| CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE, |
| prv_base, 31, 0, NULL); |
| kfree(parent); |
| kfree(clk_name); |
| } |
| out: |
| if (IS_ERR(clk)) |
| return PTR_ERR(clk); |
| |
| pdata->clk = clk; |
| clk_register_clkdev(clk, dev_desc->clk_con_id, devname); |
| return 0; |
| } |
| |
| struct lpss_device_links { |
| const char *supplier_hid; |
| const char *supplier_uid; |
| const char *consumer_hid; |
| const char *consumer_uid; |
| u32 flags; |
| }; |
| |
| /* |
| * The _DEP method is used to identify dependencies but instead of creating |
| * device links for every handle in _DEP, only links in the following list are |
| * created. That is necessary because, in the general case, _DEP can refer to |
| * devices that might not have drivers, or that are on different buses, or where |
| * the supplier is not enumerated until after the consumer is probed. |
| */ |
| static const struct lpss_device_links lpss_device_links[] = { |
| {"808622C1", "7", "80860F14", "3", DL_FLAG_PM_RUNTIME}, |
| }; |
| |
| static bool hid_uid_match(const char *hid1, const char *uid1, |
| const char *hid2, const char *uid2) |
| { |
| return !strcmp(hid1, hid2) && uid1 && uid2 && !strcmp(uid1, uid2); |
| } |
| |
| static bool acpi_lpss_is_supplier(struct acpi_device *adev, |
| const struct lpss_device_links *link) |
| { |
| return hid_uid_match(acpi_device_hid(adev), acpi_device_uid(adev), |
| link->supplier_hid, link->supplier_uid); |
| } |
| |
| static bool acpi_lpss_is_consumer(struct acpi_device *adev, |
| const struct lpss_device_links *link) |
| { |
| return hid_uid_match(acpi_device_hid(adev), acpi_device_uid(adev), |
| link->consumer_hid, link->consumer_uid); |
| } |
| |
| struct hid_uid { |
| const char *hid; |
| const char *uid; |
| }; |
| |
| static int match_hid_uid(struct device *dev, void *data) |
| { |
| struct acpi_device *adev = ACPI_COMPANION(dev); |
| struct hid_uid *id = data; |
| |
| if (!adev) |
| return 0; |
| |
| return hid_uid_match(acpi_device_hid(adev), acpi_device_uid(adev), |
| id->hid, id->uid); |
| } |
| |
| static struct device *acpi_lpss_find_device(const char *hid, const char *uid) |
| { |
| struct hid_uid data = { |
| .hid = hid, |
| .uid = uid, |
| }; |
| |
| return bus_find_device(&platform_bus_type, NULL, &data, match_hid_uid); |
| } |
| |
| static bool acpi_lpss_dep(struct acpi_device *adev, acpi_handle handle) |
| { |
| struct acpi_handle_list dep_devices; |
| acpi_status status; |
| int i; |
| |
| if (!acpi_has_method(adev->handle, "_DEP")) |
| return false; |
| |
| status = acpi_evaluate_reference(adev->handle, "_DEP", NULL, |
| &dep_devices); |
| if (ACPI_FAILURE(status)) { |
| dev_dbg(&adev->dev, "Failed to evaluate _DEP.\n"); |
| return false; |
| } |
| |
| for (i = 0; i < dep_devices.count; i++) { |
| if (dep_devices.handles[i] == handle) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| static void acpi_lpss_link_consumer(struct device *dev1, |
| const struct lpss_device_links *link) |
| { |
| struct device *dev2; |
| |
| dev2 = acpi_lpss_find_device(link->consumer_hid, link->consumer_uid); |
| if (!dev2) |
| return; |
| |
| if (acpi_lpss_dep(ACPI_COMPANION(dev2), ACPI_HANDLE(dev1))) |
| device_link_add(dev2, dev1, link->flags); |
| |
| put_device(dev2); |
| } |
| |
| static void acpi_lpss_link_supplier(struct device *dev1, |
| const struct lpss_device_links *link) |
| { |
| struct device *dev2; |
| |
| dev2 = acpi_lpss_find_device(link->supplier_hid, link->supplier_uid); |
| if (!dev2) |
| return; |
| |
| if (acpi_lpss_dep(ACPI_COMPANION(dev1), ACPI_HANDLE(dev2))) |
| device_link_add(dev1, dev2, link->flags); |
| |
| put_device(dev2); |
| } |
| |
| static void acpi_lpss_create_device_links(struct acpi_device *adev, |
| struct platform_device *pdev) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(lpss_device_links); i++) { |
| const struct lpss_device_links *link = &lpss_device_links[i]; |
| |
| if (acpi_lpss_is_supplier(adev, link)) |
| acpi_lpss_link_consumer(&pdev->dev, link); |
| |
| if (acpi_lpss_is_consumer(adev, link)) |
| acpi_lpss_link_supplier(&pdev->dev, link); |
| } |
| } |
| |
| static int acpi_lpss_create_device(struct acpi_device *adev, |
| const struct acpi_device_id *id) |
| { |
| const struct lpss_device_desc *dev_desc; |
| struct lpss_private_data *pdata; |
| struct resource_entry *rentry; |
| struct list_head resource_list; |
| struct platform_device *pdev; |
| int ret; |
| |
| dev_desc = (const struct lpss_device_desc *)id->driver_data; |
| if (!dev_desc) { |
| pdev = acpi_create_platform_device(adev, NULL); |
| return IS_ERR_OR_NULL(pdev) ? PTR_ERR(pdev) : 1; |
| } |
| pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); |
| if (!pdata) |
| return -ENOMEM; |
| |
| INIT_LIST_HEAD(&resource_list); |
| ret = acpi_dev_get_resources(adev, &resource_list, is_memory, NULL); |
| if (ret < 0) |
| goto err_out; |
| |
| list_for_each_entry(rentry, &resource_list, node) |
| if (resource_type(rentry->res) == IORESOURCE_MEM) { |
| if (dev_desc->prv_size_override) |
| pdata->mmio_size = dev_desc->prv_size_override; |
| else |
| pdata->mmio_size = resource_size(rentry->res); |
| pdata->mmio_base = ioremap(rentry->res->start, |
| pdata->mmio_size); |
| break; |
| } |
| |
| acpi_dev_free_resource_list(&resource_list); |
| |
| if (!pdata->mmio_base) { |
| /* Avoid acpi_bus_attach() instantiating a pdev for this dev. */ |
| adev->pnp.type.platform_id = 0; |
| /* Skip the device, but continue the namespace scan. */ |
| ret = 0; |
| goto err_out; |
| } |
| |
| pdata->adev = adev; |
| pdata->dev_desc = dev_desc; |
| |
| if (dev_desc->setup) |
| dev_desc->setup(pdata); |
| |
| if (dev_desc->flags & LPSS_CLK) { |
| ret = register_device_clock(adev, pdata); |
| if (ret) { |
| /* Skip the device, but continue the namespace scan. */ |
| ret = 0; |
| goto err_out; |
| } |
| } |
| |
| /* |
| * This works around a known issue in ACPI tables where LPSS devices |
| * have _PS0 and _PS3 without _PSC (and no power resources), so |
| * acpi_bus_init_power() will assume that the BIOS has put them into D0. |
| */ |
| ret = acpi_device_fix_up_power(adev); |
| if (ret) { |
| /* Skip the device, but continue the namespace scan. */ |
| ret = 0; |
| goto err_out; |
| } |
| |
| adev->driver_data = pdata; |
| pdev = acpi_create_platform_device(adev, dev_desc->properties); |
| if (!IS_ERR_OR_NULL(pdev)) { |
| acpi_lpss_create_device_links(adev, pdev); |
| return 1; |
| } |
| |
| ret = PTR_ERR(pdev); |
| adev->driver_data = NULL; |
| |
| err_out: |
| kfree(pdata); |
| return ret; |
| } |
| |
| static u32 __lpss_reg_read(struct lpss_private_data *pdata, unsigned int reg) |
| { |
| return readl(pdata->mmio_base + pdata->dev_desc->prv_offset + reg); |
| } |
| |
| static void __lpss_reg_write(u32 val, struct lpss_private_data *pdata, |
| unsigned int reg) |
| { |
| writel(val, pdata->mmio_base + pdata->dev_desc->prv_offset + reg); |
| } |
| |
| static int lpss_reg_read(struct device *dev, unsigned int reg, u32 *val) |
| { |
| struct acpi_device *adev; |
| struct lpss_private_data *pdata; |
| unsigned long flags; |
| int ret; |
| |
| ret = acpi_bus_get_device(ACPI_HANDLE(dev), &adev); |
| if (WARN_ON(ret)) |
| return ret; |
| |
| spin_lock_irqsave(&dev->power.lock, flags); |
| if (pm_runtime_suspended(dev)) { |
| ret = -EAGAIN; |
| goto out; |
| } |
| pdata = acpi_driver_data(adev); |
| if (WARN_ON(!pdata || !pdata->mmio_base)) { |
| ret = -ENODEV; |
| goto out; |
| } |
| *val = __lpss_reg_read(pdata, reg); |
| |
| out: |
| spin_unlock_irqrestore(&dev->power.lock, flags); |
| return ret; |
| } |
| |
| static ssize_t lpss_ltr_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| u32 ltr_value = 0; |
| unsigned int reg; |
| int ret; |
| |
| reg = strcmp(attr->attr.name, "auto_ltr") ? LPSS_SW_LTR : LPSS_AUTO_LTR; |
| ret = lpss_reg_read(dev, reg, <r_value); |
| if (ret) |
| return ret; |
| |
| return snprintf(buf, PAGE_SIZE, "%08x\n", ltr_value); |
| } |
| |
| static ssize_t lpss_ltr_mode_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| u32 ltr_mode = 0; |
| char *outstr; |
| int ret; |
| |
| ret = lpss_reg_read(dev, LPSS_GENERAL, <r_mode); |
| if (ret) |
| return ret; |
| |
| outstr = (ltr_mode & LPSS_GENERAL_LTR_MODE_SW) ? "sw" : "auto"; |
| return sprintf(buf, "%s\n", outstr); |
| } |
| |
| static DEVICE_ATTR(auto_ltr, S_IRUSR, lpss_ltr_show, NULL); |
| static DEVICE_ATTR(sw_ltr, S_IRUSR, lpss_ltr_show, NULL); |
| static DEVICE_ATTR(ltr_mode, S_IRUSR, lpss_ltr_mode_show, NULL); |
| |
| static struct attribute *lpss_attrs[] = { |
| &dev_attr_auto_ltr.attr, |
| &dev_attr_sw_ltr.attr, |
| &dev_attr_ltr_mode.attr, |
| NULL, |
| }; |
| |
| static const struct attribute_group lpss_attr_group = { |
| .attrs = lpss_attrs, |
| .name = "lpss_ltr", |
| }; |
| |
| static void acpi_lpss_set_ltr(struct device *dev, s32 val) |
| { |
| struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev)); |
| u32 ltr_mode, ltr_val; |
| |
| ltr_mode = __lpss_reg_read(pdata, LPSS_GENERAL); |
| if (val < 0) { |
| if (ltr_mode & LPSS_GENERAL_LTR_MODE_SW) { |
| ltr_mode &= ~LPSS_GENERAL_LTR_MODE_SW; |
| __lpss_reg_write(ltr_mode, pdata, LPSS_GENERAL); |
| } |
| return; |
| } |
| ltr_val = __lpss_reg_read(pdata, LPSS_SW_LTR) & ~LPSS_LTR_SNOOP_MASK; |
| if (val >= LPSS_LTR_SNOOP_LAT_CUTOFF) { |
| ltr_val |= LPSS_LTR_SNOOP_LAT_32US; |
| val = LPSS_LTR_MAX_VAL; |
| } else if (val > LPSS_LTR_MAX_VAL) { |
| ltr_val |= LPSS_LTR_SNOOP_LAT_32US | LPSS_LTR_SNOOP_REQ; |
| val >>= LPSS_LTR_SNOOP_LAT_SHIFT; |
| } else { |
| ltr_val |= LPSS_LTR_SNOOP_LAT_1US | LPSS_LTR_SNOOP_REQ; |
| } |
| ltr_val |= val; |
| __lpss_reg_write(ltr_val, pdata, LPSS_SW_LTR); |
| if (!(ltr_mode & LPSS_GENERAL_LTR_MODE_SW)) { |
| ltr_mode |= LPSS_GENERAL_LTR_MODE_SW; |
| __lpss_reg_write(ltr_mode, pdata, LPSS_GENERAL); |
| } |
| } |
| |
| #ifdef CONFIG_PM |
| /** |
| * acpi_lpss_save_ctx() - Save the private registers of LPSS device |
| * @dev: LPSS device |
| * @pdata: pointer to the private data of the LPSS device |
| * |
| * Most LPSS devices have private registers which may loose their context when |
| * the device is powered down. acpi_lpss_save_ctx() saves those registers into |
| * prv_reg_ctx array. |
| */ |
| static void acpi_lpss_save_ctx(struct device *dev, |
| struct lpss_private_data *pdata) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < LPSS_PRV_REG_COUNT; i++) { |
| unsigned long offset = i * sizeof(u32); |
| |
| pdata->prv_reg_ctx[i] = __lpss_reg_read(pdata, offset); |
| dev_dbg(dev, "saving 0x%08x from LPSS reg at offset 0x%02lx\n", |
| pdata->prv_reg_ctx[i], offset); |
| } |
| } |
| |
| /** |
| * acpi_lpss_restore_ctx() - Restore the private registers of LPSS device |
| * @dev: LPSS device |
| * @pdata: pointer to the private data of the LPSS device |
| * |
| * Restores the registers that were previously stored with acpi_lpss_save_ctx(). |
| */ |
| static void acpi_lpss_restore_ctx(struct device *dev, |
| struct lpss_private_data *pdata) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < LPSS_PRV_REG_COUNT; i++) { |
| unsigned long offset = i * sizeof(u32); |
| |
| __lpss_reg_write(pdata->prv_reg_ctx[i], pdata, offset); |
| dev_dbg(dev, "restoring 0x%08x to LPSS reg at offset 0x%02lx\n", |
| pdata->prv_reg_ctx[i], offset); |
| } |
| } |
| |
| static void acpi_lpss_d3_to_d0_delay(struct lpss_private_data *pdata) |
| { |
| /* |
| * The following delay is needed or the subsequent write operations may |
| * fail. The LPSS devices are actually PCI devices and the PCI spec |
| * expects 10ms delay before the device can be accessed after D3 to D0 |
| * transition. However some platforms like BSW does not need this delay. |
| */ |
| unsigned int delay = 10; /* default 10ms delay */ |
| |
| if (pdata->dev_desc->flags & LPSS_NO_D3_DELAY) |
| delay = 0; |
| |
| msleep(delay); |
| } |
| |
| static int acpi_lpss_activate(struct device *dev) |
| { |
| struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev)); |
| int ret; |
| |
| ret = acpi_dev_resume(dev); |
| if (ret) |
| return ret; |
| |
| acpi_lpss_d3_to_d0_delay(pdata); |
| |
| /* |
| * This is called only on ->probe() stage where a device is either in |
| * known state defined by BIOS or most likely powered off. Due to this |
| * we have to deassert reset line to be sure that ->probe() will |
| * recognize the device. |
| */ |
| if (pdata->dev_desc->flags & LPSS_SAVE_CTX) |
| lpss_deassert_reset(pdata); |
| |
| return 0; |
| } |
| |
| static void acpi_lpss_dismiss(struct device *dev) |
| { |
| acpi_dev_suspend(dev, false); |
| } |
| |
| /* IOSF SB for LPSS island */ |
| #define LPSS_IOSF_UNIT_LPIOEP 0xA0 |
| #define LPSS_IOSF_UNIT_LPIO1 0xAB |
| #define LPSS_IOSF_UNIT_LPIO2 0xAC |
| |
| #define LPSS_IOSF_PMCSR 0x84 |
| #define LPSS_PMCSR_D0 0 |
| #define LPSS_PMCSR_D3hot 3 |
| #define LPSS_PMCSR_Dx_MASK GENMASK(1, 0) |
| |
| #define LPSS_IOSF_GPIODEF0 0x154 |
| #define LPSS_GPIODEF0_DMA1_D3 BIT(2) |
| #define LPSS_GPIODEF0_DMA2_D3 BIT(3) |
| #define LPSS_GPIODEF0_DMA_D3_MASK GENMASK(3, 2) |
| #define LPSS_GPIODEF0_DMA_LLP BIT(13) |
| |
| static DEFINE_MUTEX(lpss_iosf_mutex); |
| |
| static void lpss_iosf_enter_d3_state(void) |
| { |
| u32 value1 = 0; |
| u32 mask1 = LPSS_GPIODEF0_DMA_D3_MASK | LPSS_GPIODEF0_DMA_LLP; |
| u32 value2 = LPSS_PMCSR_D3hot; |
| u32 mask2 = LPSS_PMCSR_Dx_MASK; |
| /* |
| * PMC provides an information about actual status of the LPSS devices. |
| * Here we read the values related to LPSS power island, i.e. LPSS |
| * devices, excluding both LPSS DMA controllers, along with SCC domain. |
| */ |
| u32 func_dis, d3_sts_0, pmc_status, pmc_mask = 0xfe000ffe; |
| int ret; |
| |
| ret = pmc_atom_read(PMC_FUNC_DIS, &func_dis); |
| if (ret) |
| return; |
| |
| mutex_lock(&lpss_iosf_mutex); |
| |
| ret = pmc_atom_read(PMC_D3_STS_0, &d3_sts_0); |
| if (ret) |
| goto exit; |
| |
| /* |
| * Get the status of entire LPSS power island per device basis. |
| * Shutdown both LPSS DMA controllers if and only if all other devices |
| * are already in D3hot. |
| */ |
| pmc_status = (~(d3_sts_0 | func_dis)) & pmc_mask; |
| if (pmc_status) |
| goto exit; |
| |
| iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO1, MBI_CFG_WRITE, |
| LPSS_IOSF_PMCSR, value2, mask2); |
| |
| iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO2, MBI_CFG_WRITE, |
| LPSS_IOSF_PMCSR, value2, mask2); |
| |
| iosf_mbi_modify(LPSS_IOSF_UNIT_LPIOEP, MBI_CR_WRITE, |
| LPSS_IOSF_GPIODEF0, value1, mask1); |
| exit: |
| mutex_unlock(&lpss_iosf_mutex); |
| } |
| |
| static void lpss_iosf_exit_d3_state(void) |
| { |
| u32 value1 = LPSS_GPIODEF0_DMA1_D3 | LPSS_GPIODEF0_DMA2_D3 | |
| LPSS_GPIODEF0_DMA_LLP; |
| u32 mask1 = LPSS_GPIODEF0_DMA_D3_MASK | LPSS_GPIODEF0_DMA_LLP; |
| u32 value2 = LPSS_PMCSR_D0; |
| u32 mask2 = LPSS_PMCSR_Dx_MASK; |
| |
| mutex_lock(&lpss_iosf_mutex); |
| |
| iosf_mbi_modify(LPSS_IOSF_UNIT_LPIOEP, MBI_CR_WRITE, |
| LPSS_IOSF_GPIODEF0, value1, mask1); |
| |
| iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO2, MBI_CFG_WRITE, |
| LPSS_IOSF_PMCSR, value2, mask2); |
| |
| iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO1, MBI_CFG_WRITE, |
| LPSS_IOSF_PMCSR, value2, mask2); |
| |
| mutex_unlock(&lpss_iosf_mutex); |
| } |
| |
| static int acpi_lpss_suspend(struct device *dev, bool wakeup) |
| { |
| struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev)); |
| int ret; |
| |
| if (pdata->dev_desc->flags & LPSS_SAVE_CTX) |
| acpi_lpss_save_ctx(dev, pdata); |
| |
| ret = acpi_dev_suspend(dev, wakeup); |
| |
| /* |
| * This call must be last in the sequence, otherwise PMC will return |
| * wrong status for devices being about to be powered off. See |
| * lpss_iosf_enter_d3_state() for further information. |
| */ |
| if (lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available()) |
| lpss_iosf_enter_d3_state(); |
| |
| return ret; |
| } |
| |
| static int acpi_lpss_resume(struct device *dev) |
| { |
| struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev)); |
| int ret; |
| |
| /* |
| * This call is kept first to be in symmetry with |
| * acpi_lpss_runtime_suspend() one. |
| */ |
| if (lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available()) |
| lpss_iosf_exit_d3_state(); |
| |
| ret = acpi_dev_resume(dev); |
| if (ret) |
| return ret; |
| |
| acpi_lpss_d3_to_d0_delay(pdata); |
| |
| if (pdata->dev_desc->flags & LPSS_SAVE_CTX) |
| acpi_lpss_restore_ctx(dev, pdata); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int acpi_lpss_suspend_late(struct device *dev) |
| { |
| int ret; |
| |
| if (dev_pm_smart_suspend_and_suspended(dev)) |
| return 0; |
| |
| ret = pm_generic_suspend_late(dev); |
| return ret ? ret : acpi_lpss_suspend(dev, device_may_wakeup(dev)); |
| } |
| |
| static int acpi_lpss_resume_early(struct device *dev) |
| { |
| int ret = acpi_lpss_resume(dev); |
| |
| return ret ? ret : pm_generic_resume_early(dev); |
| } |
| #endif /* CONFIG_PM_SLEEP */ |
| |
| static int acpi_lpss_runtime_suspend(struct device *dev) |
| { |
| int ret = pm_generic_runtime_suspend(dev); |
| |
| return ret ? ret : acpi_lpss_suspend(dev, true); |
| } |
| |
| static int acpi_lpss_runtime_resume(struct device *dev) |
| { |
| int ret = acpi_lpss_resume(dev); |
| |
| return ret ? ret : pm_generic_runtime_resume(dev); |
| } |
| #endif /* CONFIG_PM */ |
| |
| static struct dev_pm_domain acpi_lpss_pm_domain = { |
| #ifdef CONFIG_PM |
| .activate = acpi_lpss_activate, |
| .dismiss = acpi_lpss_dismiss, |
| #endif |
| .ops = { |
| #ifdef CONFIG_PM |
| #ifdef CONFIG_PM_SLEEP |
| .prepare = acpi_subsys_prepare, |
| .complete = acpi_subsys_complete, |
| .suspend = acpi_subsys_suspend, |
| .suspend_late = acpi_lpss_suspend_late, |
| .suspend_noirq = acpi_subsys_suspend_noirq, |
| .resume_noirq = acpi_subsys_resume_noirq, |
| .resume_early = acpi_lpss_resume_early, |
| .freeze = acpi_subsys_freeze, |
| .freeze_late = acpi_subsys_freeze_late, |
| .freeze_noirq = acpi_subsys_freeze_noirq, |
| .thaw_noirq = acpi_subsys_thaw_noirq, |
| .poweroff = acpi_subsys_suspend, |
| .poweroff_late = acpi_lpss_suspend_late, |
| .poweroff_noirq = acpi_subsys_suspend_noirq, |
| .restore_noirq = acpi_subsys_resume_noirq, |
| .restore_early = acpi_lpss_resume_early, |
| #endif |
| .runtime_suspend = acpi_lpss_runtime_suspend, |
| .runtime_resume = acpi_lpss_runtime_resume, |
| #endif |
| }, |
| }; |
| |
| static int acpi_lpss_platform_notify(struct notifier_block *nb, |
| unsigned long action, void *data) |
| { |
| struct platform_device *pdev = to_platform_device(data); |
| struct lpss_private_data *pdata; |
| struct acpi_device *adev; |
| const struct acpi_device_id *id; |
| |
| id = acpi_match_device(acpi_lpss_device_ids, &pdev->dev); |
| if (!id || !id->driver_data) |
| return 0; |
| |
| if (acpi_bus_get_device(ACPI_HANDLE(&pdev->dev), &adev)) |
| return 0; |
| |
| pdata = acpi_driver_data(adev); |
| if (!pdata) |
| return 0; |
| |
| if (pdata->mmio_base && |
| pdata->mmio_size < pdata->dev_desc->prv_offset + LPSS_LTR_SIZE) { |
| dev_err(&pdev->dev, "MMIO size insufficient to access LTR\n"); |
| return 0; |
| } |
| |
| switch (action) { |
| case BUS_NOTIFY_BIND_DRIVER: |
| dev_pm_domain_set(&pdev->dev, &acpi_lpss_pm_domain); |
| break; |
| case BUS_NOTIFY_DRIVER_NOT_BOUND: |
| case BUS_NOTIFY_UNBOUND_DRIVER: |
| dev_pm_domain_set(&pdev->dev, NULL); |
| break; |
| case BUS_NOTIFY_ADD_DEVICE: |
| dev_pm_domain_set(&pdev->dev, &acpi_lpss_pm_domain); |
| if (pdata->dev_desc->flags & LPSS_LTR) |
| return sysfs_create_group(&pdev->dev.kobj, |
| &lpss_attr_group); |
| break; |
| case BUS_NOTIFY_DEL_DEVICE: |
| if (pdata->dev_desc->flags & LPSS_LTR) |
| sysfs_remove_group(&pdev->dev.kobj, &lpss_attr_group); |
| dev_pm_domain_set(&pdev->dev, NULL); |
| break; |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static struct notifier_block acpi_lpss_nb = { |
| .notifier_call = acpi_lpss_platform_notify, |
| }; |
| |
| static void acpi_lpss_bind(struct device *dev) |
| { |
| struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev)); |
| |
| if (!pdata || !pdata->mmio_base || !(pdata->dev_desc->flags & LPSS_LTR)) |
| return; |
| |
| if (pdata->mmio_size >= pdata->dev_desc->prv_offset + LPSS_LTR_SIZE) |
| dev->power.set_latency_tolerance = acpi_lpss_set_ltr; |
| else |
| dev_err(dev, "MMIO size insufficient to access LTR\n"); |
| } |
| |
| static void acpi_lpss_unbind(struct device *dev) |
| { |
| dev->power.set_latency_tolerance = NULL; |
| } |
| |
| static struct acpi_scan_handler lpss_handler = { |
| .ids = acpi_lpss_device_ids, |
| .attach = acpi_lpss_create_device, |
| .bind = acpi_lpss_bind, |
| .unbind = acpi_lpss_unbind, |
| }; |
| |
| void __init acpi_lpss_init(void) |
| { |
| const struct x86_cpu_id *id; |
| int ret; |
| |
| ret = lpt_clk_init(); |
| if (ret) |
| return; |
| |
| id = x86_match_cpu(lpss_cpu_ids); |
| if (id) |
| lpss_quirks |= LPSS_QUIRK_ALWAYS_POWER_ON; |
| |
| bus_register_notifier(&platform_bus_type, &acpi_lpss_nb); |
| acpi_scan_add_handler(&lpss_handler); |
| } |
| |
| #else |
| |
| static struct acpi_scan_handler lpss_handler = { |
| .ids = acpi_lpss_device_ids, |
| }; |
| |
| void __init acpi_lpss_init(void) |
| { |
| acpi_scan_add_handler(&lpss_handler); |
| } |
| |
| #endif /* CONFIG_X86_INTEL_LPSS */ |