| /* SPDX-License-Identifier: GPL-2.0 */ |
| #ifndef _M68K_CACHEFLUSH_H |
| #define _M68K_CACHEFLUSH_H |
| |
| #include <linux/mm.h> |
| #ifdef CONFIG_COLDFIRE |
| #include <asm/mcfsim.h> |
| #endif |
| |
| /* cache code */ |
| #define FLUSH_I_AND_D (0x00000808) |
| #define FLUSH_I (0x00000008) |
| |
| #ifndef ICACHE_MAX_ADDR |
| #define ICACHE_MAX_ADDR 0 |
| #define ICACHE_SET_MASK 0 |
| #define DCACHE_MAX_ADDR 0 |
| #define DCACHE_SETMASK 0 |
| #endif |
| #ifndef CACHE_MODE |
| #define CACHE_MODE 0 |
| #define CACR_ICINVA 0 |
| #define CACR_DCINVA 0 |
| #define CACR_BCINVA 0 |
| #endif |
| |
| /* |
| * ColdFire architecture has no way to clear individual cache lines, so we |
| * are stuck invalidating all the cache entries when we want a clear operation. |
| */ |
| static inline void clear_cf_icache(unsigned long start, unsigned long end) |
| { |
| __asm__ __volatile__ ( |
| "movec %0,%%cacr\n\t" |
| "nop" |
| : |
| : "r" (CACHE_MODE | CACR_ICINVA | CACR_BCINVA)); |
| } |
| |
| static inline void clear_cf_dcache(unsigned long start, unsigned long end) |
| { |
| __asm__ __volatile__ ( |
| "movec %0,%%cacr\n\t" |
| "nop" |
| : |
| : "r" (CACHE_MODE | CACR_DCINVA)); |
| } |
| |
| static inline void clear_cf_bcache(unsigned long start, unsigned long end) |
| { |
| __asm__ __volatile__ ( |
| "movec %0,%%cacr\n\t" |
| "nop" |
| : |
| : "r" (CACHE_MODE | CACR_ICINVA | CACR_BCINVA | CACR_DCINVA)); |
| } |
| |
| /* |
| * Use the ColdFire cpushl instruction to push (and invalidate) cache lines. |
| * The start and end addresses are cache line numbers not memory addresses. |
| */ |
| static inline void flush_cf_icache(unsigned long start, unsigned long end) |
| { |
| unsigned long set; |
| |
| for (set = start; set <= end; set += (0x10 - 3)) { |
| __asm__ __volatile__ ( |
| "cpushl %%ic,(%0)\n\t" |
| "addq%.l #1,%0\n\t" |
| "cpushl %%ic,(%0)\n\t" |
| "addq%.l #1,%0\n\t" |
| "cpushl %%ic,(%0)\n\t" |
| "addq%.l #1,%0\n\t" |
| "cpushl %%ic,(%0)" |
| : "=a" (set) |
| : "a" (set)); |
| } |
| } |
| |
| static inline void flush_cf_dcache(unsigned long start, unsigned long end) |
| { |
| unsigned long set; |
| |
| for (set = start; set <= end; set += (0x10 - 3)) { |
| __asm__ __volatile__ ( |
| "cpushl %%dc,(%0)\n\t" |
| "addq%.l #1,%0\n\t" |
| "cpushl %%dc,(%0)\n\t" |
| "addq%.l #1,%0\n\t" |
| "cpushl %%dc,(%0)\n\t" |
| "addq%.l #1,%0\n\t" |
| "cpushl %%dc,(%0)" |
| : "=a" (set) |
| : "a" (set)); |
| } |
| } |
| |
| static inline void flush_cf_bcache(unsigned long start, unsigned long end) |
| { |
| unsigned long set; |
| |
| for (set = start; set <= end; set += (0x10 - 3)) { |
| __asm__ __volatile__ ( |
| "cpushl %%bc,(%0)\n\t" |
| "addq%.l #1,%0\n\t" |
| "cpushl %%bc,(%0)\n\t" |
| "addq%.l #1,%0\n\t" |
| "cpushl %%bc,(%0)\n\t" |
| "addq%.l #1,%0\n\t" |
| "cpushl %%bc,(%0)" |
| : "=a" (set) |
| : "a" (set)); |
| } |
| } |
| |
| /* |
| * Cache handling functions |
| */ |
| |
| static inline void flush_icache(void) |
| { |
| if (CPU_IS_COLDFIRE) { |
| flush_cf_icache(0, ICACHE_MAX_ADDR); |
| } else if (CPU_IS_040_OR_060) { |
| asm volatile ( "nop\n" |
| " .chip 68040\n" |
| " cpusha %bc\n" |
| " .chip 68k"); |
| } else { |
| unsigned long tmp; |
| asm volatile ( "movec %%cacr,%0\n" |
| " or.w %1,%0\n" |
| " movec %0,%%cacr" |
| : "=&d" (tmp) |
| : "id" (FLUSH_I)); |
| } |
| } |
| |
| /* |
| * invalidate the cache for the specified memory range. |
| * It starts at the physical address specified for |
| * the given number of bytes. |
| */ |
| extern void cache_clear(unsigned long paddr, int len); |
| /* |
| * push any dirty cache in the specified memory range. |
| * It starts at the physical address specified for |
| * the given number of bytes. |
| */ |
| extern void cache_push(unsigned long paddr, int len); |
| |
| /* |
| * push and invalidate pages in the specified user virtual |
| * memory range. |
| */ |
| extern void cache_push_v(unsigned long vaddr, int len); |
| |
| /* This is needed whenever the virtual mapping of the current |
| process changes. */ |
| #define __flush_cache_all() \ |
| ({ \ |
| if (CPU_IS_COLDFIRE) { \ |
| flush_cf_dcache(0, DCACHE_MAX_ADDR); \ |
| } else if (CPU_IS_040_OR_060) { \ |
| __asm__ __volatile__("nop\n\t" \ |
| ".chip 68040\n\t" \ |
| "cpusha %dc\n\t" \ |
| ".chip 68k"); \ |
| } else { \ |
| unsigned long _tmp; \ |
| __asm__ __volatile__("movec %%cacr,%0\n\t" \ |
| "orw %1,%0\n\t" \ |
| "movec %0,%%cacr" \ |
| : "=&d" (_tmp) \ |
| : "di" (FLUSH_I_AND_D)); \ |
| } \ |
| }) |
| |
| #define __flush_cache_030() \ |
| ({ \ |
| if (CPU_IS_020_OR_030) { \ |
| unsigned long _tmp; \ |
| __asm__ __volatile__("movec %%cacr,%0\n\t" \ |
| "orw %1,%0\n\t" \ |
| "movec %0,%%cacr" \ |
| : "=&d" (_tmp) \ |
| : "di" (FLUSH_I_AND_D)); \ |
| } \ |
| }) |
| |
| #define flush_cache_all() __flush_cache_all() |
| |
| #define flush_cache_vmap(start, end) flush_cache_all() |
| #define flush_cache_vunmap(start, end) flush_cache_all() |
| |
| static inline void flush_cache_mm(struct mm_struct *mm) |
| { |
| if (mm == current->mm) |
| __flush_cache_030(); |
| } |
| |
| #define flush_cache_dup_mm(mm) flush_cache_mm(mm) |
| |
| /* flush_cache_range/flush_cache_page must be macros to avoid |
| a dependency on linux/mm.h, which includes this file... */ |
| static inline void flush_cache_range(struct vm_area_struct *vma, |
| unsigned long start, |
| unsigned long end) |
| { |
| if (vma->vm_mm == current->mm) |
| __flush_cache_030(); |
| } |
| |
| static inline void flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr, unsigned long pfn) |
| { |
| if (vma->vm_mm == current->mm) |
| __flush_cache_030(); |
| } |
| |
| |
| /* Push the page at kernel virtual address and clear the icache */ |
| /* RZ: use cpush %bc instead of cpush %dc, cinv %ic */ |
| static inline void __flush_page_to_ram(void *vaddr) |
| { |
| if (CPU_IS_COLDFIRE) { |
| unsigned long addr, start, end; |
| addr = ((unsigned long) vaddr) & ~(PAGE_SIZE - 1); |
| start = addr & ICACHE_SET_MASK; |
| end = (addr + PAGE_SIZE - 1) & ICACHE_SET_MASK; |
| if (start > end) { |
| flush_cf_bcache(0, end); |
| end = ICACHE_MAX_ADDR; |
| } |
| flush_cf_bcache(start, end); |
| } else if (CPU_IS_040_OR_060) { |
| __asm__ __volatile__("nop\n\t" |
| ".chip 68040\n\t" |
| "cpushp %%bc,(%0)\n\t" |
| ".chip 68k" |
| : : "a" (__pa(vaddr))); |
| } else { |
| unsigned long _tmp; |
| __asm__ __volatile__("movec %%cacr,%0\n\t" |
| "orw %1,%0\n\t" |
| "movec %0,%%cacr" |
| : "=&d" (_tmp) |
| : "di" (FLUSH_I)); |
| } |
| } |
| |
| #define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1 |
| #define flush_dcache_page(page) __flush_page_to_ram(page_address(page)) |
| #define flush_dcache_mmap_lock(mapping) do { } while (0) |
| #define flush_dcache_mmap_unlock(mapping) do { } while (0) |
| #define flush_icache_page(vma, page) __flush_page_to_ram(page_address(page)) |
| |
| extern void flush_icache_user_page(struct vm_area_struct *vma, struct page *page, |
| unsigned long addr, int len); |
| extern void flush_icache_range(unsigned long address, unsigned long endaddr); |
| |
| static inline void copy_to_user_page(struct vm_area_struct *vma, |
| struct page *page, unsigned long vaddr, |
| void *dst, void *src, int len) |
| { |
| flush_cache_page(vma, vaddr, page_to_pfn(page)); |
| memcpy(dst, src, len); |
| flush_icache_user_page(vma, page, vaddr, len); |
| } |
| static inline void copy_from_user_page(struct vm_area_struct *vma, |
| struct page *page, unsigned long vaddr, |
| void *dst, void *src, int len) |
| { |
| flush_cache_page(vma, vaddr, page_to_pfn(page)); |
| memcpy(dst, src, len); |
| } |
| |
| #endif /* _M68K_CACHEFLUSH_H */ |