| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/memory-controllers/fsl/fsl,imx-weim.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: i.MX Wireless External Interface Module (WEIM) |
| |
| maintainers: |
| - Shawn Guo <shawnguo@kernel.org> |
| - Sascha Hauer <s.hauer@pengutronix.de> |
| |
| description: |
| The term "wireless" does not imply that the WEIM is literally an interface |
| without wires. It simply means that this module was originally designed for |
| wireless and mobile applications that use low-power technology. The actual |
| devices are instantiated from the child nodes of a WEIM node. |
| |
| properties: |
| $nodename: |
| pattern: "^memory-controller@[0-9a-f]+$" |
| |
| compatible: |
| oneOf: |
| - enum: |
| - fsl,imx1-weim |
| - fsl,imx27-weim |
| - fsl,imx50-weim |
| - fsl,imx51-weim |
| - fsl,imx6q-weim |
| - items: |
| - enum: |
| - fsl,imx31-weim |
| - fsl,imx35-weim |
| - const: fsl,imx27-weim |
| - items: |
| - enum: |
| - fsl,imx6sx-weim |
| - fsl,imx6ul-weim |
| - const: fsl,imx6q-weim |
| |
| "#address-cells": |
| const: 2 |
| |
| "#size-cells": |
| const: 1 |
| |
| reg: |
| maxItems: 1 |
| |
| clocks: |
| maxItems: 1 |
| |
| interrupts: |
| maxItems: 1 |
| |
| ranges: true |
| |
| fsl,weim-cs-gpr: |
| $ref: /schemas/types.yaml#/definitions/phandle |
| description: | |
| Phandle to the system General Purpose Register controller that contains |
| WEIM CS GPR register, e.g. IOMUXC_GPR1 on i.MX6Q. IOMUXC_GPR1[11:0] |
| should be set up as one of the following 4 possible values depending on |
| the CS space configuration. |
| |
| IOMUXC_GPR1[11:0] CS0 CS1 CS2 CS3 |
| --------------------------------------------- |
| 05 128M 0M 0M 0M |
| 033 64M 64M 0M 0M |
| 0113 64M 32M 32M 0M |
| 01111 32M 32M 32M 32M |
| |
| In case that the property is absent, the reset value or what bootloader |
| sets up in IOMUXC_GPR1[11:0] will be used. |
| |
| fsl,burst-clk-enable: |
| type: boolean |
| description: |
| The presence of this property indicates that the weim bus should operate |
| in Burst Clock Mode. |
| |
| fsl,continuous-burst-clk: |
| type: boolean |
| description: |
| Make Burst Clock to output continuous clock. Without this option Burst |
| Clock will output clock only when necessary. |
| |
| patternProperties: |
| "^.*@[0-7],[0-9a-f]+$": |
| type: object |
| description: Devices attached to chip selects are represented as subnodes. |
| $ref: fsl,imx-weim-peripherals.yaml |
| additionalProperties: true |
| required: |
| - fsl,weim-cs-timing |
| |
| required: |
| - compatible |
| - reg |
| - clocks |
| - "#address-cells" |
| - "#size-cells" |
| - ranges |
| |
| allOf: |
| - if: |
| properties: |
| compatible: |
| not: |
| contains: |
| enum: |
| - fsl,imx50-weim |
| - fsl,imx6q-weim |
| then: |
| properties: |
| fsl,weim-cs-gpr: false |
| fsl,burst-clk-enable: false |
| - if: |
| not: |
| required: |
| - fsl,burst-clk-enable |
| then: |
| properties: |
| fsl,continuous-burst-clk: false |
| - if: |
| properties: |
| compatible: |
| contains: |
| const: fsl,imx1-weim |
| then: |
| patternProperties: |
| "^.*@[0-7],[0-9a-f]+$": |
| properties: |
| fsl,weim-cs-timing: |
| items: |
| items: |
| - description: CSxU |
| - description: CSxL |
| - if: |
| properties: |
| compatible: |
| contains: |
| enum: |
| - fsl,imx27-weim |
| - fsl,imx31-weim |
| - fsl,imx35-weim |
| then: |
| patternProperties: |
| "^.*@[0-7],[0-9a-f]+$": |
| properties: |
| fsl,weim-cs-timing: |
| items: |
| items: |
| - description: CSCRxU |
| - description: CSCRxL |
| - description: CSCRxA |
| - if: |
| properties: |
| compatible: |
| contains: |
| enum: |
| - fsl,imx50-weim |
| - fsl,imx51-weim |
| - fsl,imx6q-weim |
| - fsl,imx6sx-weim |
| - fsl,imx6ul-weim |
| then: |
| patternProperties: |
| "^.*@[0-7],[0-9a-f]+$": |
| properties: |
| fsl,weim-cs-timing: |
| items: |
| items: |
| - description: CSxGCR1 |
| - description: CSxGCR2 |
| - description: CSxRCR1 |
| - description: CSxRCR2 |
| - description: CSxWCR1 |
| - description: CSxWCR2 |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| memory-controller@21b8000 { |
| compatible = "fsl,imx6q-weim"; |
| reg = <0x021b8000 0x4000>; |
| clocks = <&clks 196>; |
| #address-cells = <2>; |
| #size-cells = <1>; |
| ranges = <0 0 0x08000000 0x08000000>; |
| fsl,weim-cs-gpr = <&gpr>; |
| |
| flash@0,0 { |
| compatible = "cfi-flash"; |
| reg = <0 0 0x02000000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| bank-width = <2>; |
| fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000 |
| 0x0000c000 0x1404a38e 0x00000000>; |
| }; |
| }; |