blob: 617f3c0b3dfb678e558ff47529e5c5940c7f2d46 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/phy/transmit-amplitude.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Common PHY and network PCS transmit amplitude property
description:
Binding describing the peak-to-peak transmit amplitude for common PHYs
and network PCSes.
maintainers:
- Marek BehĂșn <kabel@kernel.org>
properties:
tx-p2p-microvolt:
description:
Transmit amplitude voltages in microvolts, peak-to-peak. If this property
contains multiple values for various PHY modes, the
'tx-p2p-microvolt-names' property must be provided and contain
corresponding mode names.
tx-p2p-microvolt-names:
description: |
Names of the modes corresponding to voltages in the 'tx-p2p-microvolt'
property. Required only if multiple voltages are provided.
If a value of 'default' is provided, the system should use it for any PHY
mode that is otherwise not defined here. If 'default' is not provided, the
system should use manufacturer default value.
minItems: 1
maxItems: 16
items:
enum:
- default
# ethernet modes
- sgmii
- qsgmii
- xgmii
- 1000base-x
- 2500base-x
- 5gbase-r
- rxaui
- xaui
- 10gbase-kr
- usxgmii
- 10gbase-r
- 25gbase-r
# PCIe modes
- pcie
- pcie1
- pcie2
- pcie3
- pcie4
- pcie5
- pcie6
# USB modes
- usb
- usb-ls
- usb-fs
- usb-hs
- usb-ss
- usb-ss+
- usb-4
# storage modes
- sata
- ufs-hs
- ufs-hs-a
- ufs-hs-b
# display modes
- lvds
- dp
- dp-rbr
- dp-hbr
- dp-hbr2
- dp-hbr3
- dp-uhbr-10
- dp-uhbr-13.5
- dp-uhbr-20
# camera modes
- mipi-dphy
- mipi-dphy-univ
- mipi-dphy-v2.5-univ
dependencies:
tx-p2p-microvolt-names: [ tx-p2p-microvolt ]
additionalProperties: true
examples:
- |
phy: phy {
#phy-cells = <1>;
tx-p2p-microvolt = <915000>, <1100000>, <1200000>;
tx-p2p-microvolt-names = "2500base-x", "usb-hs", "usb-ss";
};