Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml

# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/spi/cdns,qspi-nor.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Cadence Quad SPI controller

maintainers:
  - Vaishnav Achath <vaishnav.a@ti.com>

allOf:
  - $ref: spi-controller.yaml#
  - if:
      properties:
        compatible:
          contains:
            const: xlnx,versal-ospi-1.0
    then:
      required:
        - power-domains
  - if:
      properties:
        compatible:
          contains:
            const: starfive,jh7110-qspi
    then:
      properties:
        resets:
          minItems: 2
          maxItems: 3

        reset-names:
          minItems: 2
          maxItems: 3
          items:
            enum: [ qspi, qspi-ocp, rstc_ref ]

    else:
      properties:
        resets:
          maxItems: 2

        reset-names:
          minItems: 1
          maxItems: 2
          items:
            enum: [ qspi, qspi-ocp ]
  - if:
      properties:
        compatible:
          contains:
            const: amd,pensando-elba-qspi
    then:
      properties:
        cdns,fifo-depth:
          enum: [ 128, 256, 1024 ]
          default: 1024
    else:
      properties:
        cdns,fifo-depth:
          enum: [ 128, 256 ]
          default: 128

properties:
  compatible:
    oneOf:
      - items:
          - enum:
              - amd,pensando-elba-qspi
              - ti,k2g-qspi
              - ti,am654-ospi
              - intel,lgm-qspi
              - xlnx,versal-ospi-1.0
              - intel,socfpga-qspi
              - starfive,jh7110-qspi
          - const: cdns,qspi-nor
      - const: cdns,qspi-nor

  reg:
    items:
      - description: the controller register set
      - description: the controller data area

  interrupts:
    maxItems: 1

  clocks:
    minItems: 1
    maxItems: 3

  clock-names:
    oneOf:
      - items:
          - const: ref
      - items:
          - const: ref
          - const: ahb
          - const: apb

  cdns,fifo-depth:
    description:
      Size of the data FIFO in words.
    $ref: /schemas/types.yaml#/definitions/uint32

  cdns,fifo-width:
    $ref: /schemas/types.yaml#/definitions/uint32
    description:
      Bus width of the data FIFO in bytes.
    default: 4

  cdns,trigger-address:
    $ref: /schemas/types.yaml#/definitions/uint32
    description:
      32-bit indirect AHB trigger address.

  cdns,is-decoded-cs:
    type: boolean
    description:
      Flag to indicate whether decoder is used to select different chip select
      for different memory regions.

  cdns,rclk-en:
    type: boolean
    description:
      Flag to indicate that QSPI return clock is used to latch the read
      data rather than the QSPI clock. Make sure that QSPI return clock
      is populated on the board before using this property.

  power-domains:
    maxItems: 1

  resets:
    minItems: 2
    maxItems: 3

  reset-names:
    minItems: 2
    maxItems: 3
    items:
      enum: [ qspi, qspi-ocp, rstc_ref ]

required:
  - compatible
  - reg
  - interrupts
  - clocks
  - cdns,fifo-depth
  - cdns,fifo-width
  - cdns,trigger-address
  - '#address-cells'
  - '#size-cells'

unevaluatedProperties: false

examples:
  - |
    qspi: spi@ff705000 {
        compatible = "cdns,qspi-nor";
        #address-cells = <1>;
        #size-cells = <0>;
        reg = <0xff705000 0x1000>,
              <0xffa00000 0x1000>;
        interrupts = <0 151 4>;
        clocks = <&qspi_clk>;
        cdns,fifo-depth = <128>;
        cdns,fifo-width = <4>;
        cdns,trigger-address = <0x00000000>;
        resets = <&rst 0x1>, <&rst 0x2>;
        reset-names = "qspi", "qspi-ocp";

        flash@0 {
            compatible = "jedec,spi-nor";
            reg = <0x0>;
        };
    };