blob: 611cd904f0357e08fffca607ba1de0b51a109479 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*
* Infrastructure for migratable timers
*
* Copyright(C) 2022 linutronix GmbH
*/
#include <linux/cpuhotplug.h>
#include <linux/slab.h>
#include <linux/smp.h>
#include <linux/spinlock.h>
#include <linux/timerqueue.h>
#include <trace/events/ipi.h>
#include "timer_migration.h"
#include "tick-internal.h"
#define CREATE_TRACE_POINTS
#include <trace/events/timer_migration.h>
/*
* The timer migration mechanism is built on a hierarchy of groups. The
* lowest level group contains CPUs, the next level groups of CPU groups
* and so forth. The CPU groups are kept per node so for the normal case
* lock contention won't happen across nodes. Depending on the number of
* CPUs per node even the next level might be kept as groups of CPU groups
* per node and only the levels above cross the node topology.
*
* Example topology for a two node system with 24 CPUs each.
*
* LVL 2 [GRP2:0]
* GRP1:0 = GRP1:M
*
* LVL 1 [GRP1:0] [GRP1:1]
* GRP0:0 - GRP0:2 GRP0:3 - GRP0:5
*
* LVL 0 [GRP0:0] [GRP0:1] [GRP0:2] [GRP0:3] [GRP0:4] [GRP0:5]
* CPUS 0-7 8-15 16-23 24-31 32-39 40-47
*
* The groups hold a timer queue of events sorted by expiry time. These
* queues are updated when CPUs go in idle. When they come out of idle
* ignore flag of events is set.
*
* Each group has a designated migrator CPU/group as long as a CPU/group is
* active in the group. This designated role is necessary to avoid that all
* active CPUs in a group try to migrate expired timers from other CPUs,
* which would result in massive lock bouncing.
*
* When a CPU is awake, it checks in it's own timer tick the group
* hierarchy up to the point where it is assigned the migrator role or if
* no CPU is active, it also checks the groups where no migrator is set
* (TMIGR_NONE).
*
* If it finds expired timers in one of the group queues it pulls them over
* from the idle CPU and runs the timer function. After that it updates the
* group and the parent groups if required.
*
* CPUs which go idle arm their CPU local timer hardware for the next local
* (pinned) timer event. If the next migratable timer expires after the
* next local timer or the CPU has no migratable timer pending then the
* CPU does not queue an event in the LVL0 group. If the next migratable
* timer expires before the next local timer then the CPU queues that timer
* in the LVL0 group. In both cases the CPU marks itself idle in the LVL0
* group.
*
* When CPU comes out of idle and when a group has at least a single active
* child, the ignore flag of the tmigr_event is set. This indicates, that
* the event is ignored even if it is still enqueued in the parent groups
* timer queue. It will be removed when touching the timer queue the next
* time. This spares locking in active path as the lock protects (after
* setup) only event information. For more information about locking,
* please read the section "Locking rules".
*
* If the CPU is the migrator of the group then it delegates that role to
* the next active CPU in the group or sets migrator to TMIGR_NONE when
* there is no active CPU in the group. This delegation needs to be
* propagated up the hierarchy so hand over from other leaves can happen at
* all hierarchy levels w/o doing a search.
*
* When the last CPU in the system goes idle, then it drops all migrator
* duties up to the top level of the hierarchy (LVL2 in the example). It
* then has to make sure, that it arms it's own local hardware timer for
* the earliest event in the system.
*
*
* Lifetime rules:
* ---------------
*
* The groups are built up at init time or when CPUs come online. They are
* not destroyed when a group becomes empty due to offlining. The group
* just won't participate in the hierarchy management anymore. Destroying
* groups would result in interesting race conditions which would just make
* the whole mechanism slow and complex.
*
*
* Locking rules:
* --------------
*
* For setting up new groups and handling events it's required to lock both
* child and parent group. The lock ordering is always bottom up. This also
* includes the per CPU locks in struct tmigr_cpu. For updating the migrator and
* active CPU/group information atomic_try_cmpxchg() is used instead and only
* the per CPU tmigr_cpu->lock is held.
*
* During the setup of groups tmigr_level_list is required. It is protected by
* @tmigr_mutex.
*
* When @timer_base->lock as well as tmigr related locks are required, the lock
* ordering is: first @timer_base->lock, afterwards tmigr related locks.
*
*
* Protection of the tmigr group state information:
* ------------------------------------------------
*
* The state information with the list of active children and migrator needs to
* be protected by a sequence counter. It prevents a race when updates in child
* groups are propagated in changed order. The state update is performed
* lockless and group wise. The following scenario describes what happens
* without updating the sequence counter:
*
* Therefore, let's take three groups and four CPUs (CPU2 and CPU3 as well
* as GRP0:1 will not change during the scenario):
*
* LVL 1 [GRP1:0]
* migrator = GRP0:1
* active = GRP0:0, GRP0:1
* / \
* LVL 0 [GRP0:0] [GRP0:1]
* migrator = CPU0 migrator = CPU2
* active = CPU0 active = CPU2
* / \ / \
* CPUs 0 1 2 3
* active idle active idle
*
*
* 1. CPU0 goes idle. As the update is performed group wise, in the first step
* only GRP0:0 is updated. The update of GRP1:0 is pending as CPU0 has to
* walk the hierarchy.
*
* LVL 1 [GRP1:0]
* migrator = GRP0:1
* active = GRP0:0, GRP0:1
* / \
* LVL 0 [GRP0:0] [GRP0:1]
* --> migrator = TMIGR_NONE migrator = CPU2
* --> active = active = CPU2
* / \ / \
* CPUs 0 1 2 3
* --> idle idle active idle
*
* 2. While CPU0 goes idle and continues to update the state, CPU1 comes out of
* idle. CPU1 updates GRP0:0. The update for GRP1:0 is pending as CPU1 also
* has to walk the hierarchy. Both CPUs (CPU0 and CPU1) now walk the
* hierarchy to perform the needed update from their point of view. The
* currently visible state looks the following:
*
* LVL 1 [GRP1:0]
* migrator = GRP0:1
* active = GRP0:0, GRP0:1
* / \
* LVL 0 [GRP0:0] [GRP0:1]
* --> migrator = CPU1 migrator = CPU2
* --> active = CPU1 active = CPU2
* / \ / \
* CPUs 0 1 2 3
* idle --> active active idle
*
* 3. Here is the race condition: CPU1 managed to propagate its changes (from
* step 2) through the hierarchy to GRP1:0 before CPU0 (step 1) did. The
* active members of GRP1:0 remain unchanged after the update since it is
* still valid from CPU1 current point of view:
*
* LVL 1 [GRP1:0]
* --> migrator = GRP0:1
* --> active = GRP0:0, GRP0:1
* / \
* LVL 0 [GRP0:0] [GRP0:1]
* migrator = CPU1 migrator = CPU2
* active = CPU1 active = CPU2
* / \ / \
* CPUs 0 1 2 3
* idle active active idle
*
* 4. Now CPU0 finally propagates its changes (from step 1) to GRP1:0.
*
* LVL 1 [GRP1:0]
* --> migrator = GRP0:1
* --> active = GRP0:1
* / \
* LVL 0 [GRP0:0] [GRP0:1]
* migrator = CPU1 migrator = CPU2
* active = CPU1 active = CPU2
* / \ / \
* CPUs 0 1 2 3
* idle active active idle
*
*
* The race of CPU0 vs. CPU1 led to an inconsistent state in GRP1:0. CPU1 is
* active and is correctly listed as active in GRP0:0. However GRP1:0 does not
* have GRP0:0 listed as active, which is wrong. The sequence counter has been
* added to avoid inconsistent states during updates. The state is updated
* atomically only if all members, including the sequence counter, match the
* expected value (compare-and-exchange).
*
* Looking back at the previous example with the addition of the sequence
* counter: The update as performed by CPU0 in step 4 will fail. CPU1 changed
* the sequence number during the update in step 3 so the expected old value (as
* seen by CPU0 before starting the walk) does not match.
*
* Prevent race between new event and last CPU going inactive
* ----------------------------------------------------------
*
* When the last CPU is going idle and there is a concurrent update of a new
* first global timer of an idle CPU, the group and child states have to be read
* while holding the lock in tmigr_update_events(). The following scenario shows
* what happens, when this is not done.
*
* 1. Only CPU2 is active:
*
* LVL 1 [GRP1:0]
* migrator = GRP0:1
* active = GRP0:1
* next_expiry = KTIME_MAX
* / \
* LVL 0 [GRP0:0] [GRP0:1]
* migrator = TMIGR_NONE migrator = CPU2
* active = active = CPU2
* next_expiry = KTIME_MAX next_expiry = KTIME_MAX
* / \ / \
* CPUs 0 1 2 3
* idle idle active idle
*
* 2. Now CPU 2 goes idle (and has no global timer, that has to be handled) and
* propagates that to GRP0:1:
*
* LVL 1 [GRP1:0]
* migrator = GRP0:1
* active = GRP0:1
* next_expiry = KTIME_MAX
* / \
* LVL 0 [GRP0:0] [GRP0:1]
* migrator = TMIGR_NONE --> migrator = TMIGR_NONE
* active = --> active =
* next_expiry = KTIME_MAX next_expiry = KTIME_MAX
* / \ / \
* CPUs 0 1 2 3
* idle idle --> idle idle
*
* 3. Now the idle state is propagated up to GRP1:0. As this is now the last
* child going idle in top level group, the expiry of the next group event
* has to be handed back to make sure no event is lost. As there is no event
* enqueued, KTIME_MAX is handed back to CPU2.
*
* LVL 1 [GRP1:0]
* --> migrator = TMIGR_NONE
* --> active =
* next_expiry = KTIME_MAX
* / \
* LVL 0 [GRP0:0] [GRP0:1]
* migrator = TMIGR_NONE migrator = TMIGR_NONE
* active = active =
* next_expiry = KTIME_MAX next_expiry = KTIME_MAX
* / \ / \
* CPUs 0 1 2 3
* idle idle --> idle idle
*
* 4. CPU 0 has a new timer queued from idle and it expires at TIMER0. CPU0
* propagates that to GRP0:0:
*
* LVL 1 [GRP1:0]
* migrator = TMIGR_NONE
* active =
* next_expiry = KTIME_MAX
* / \
* LVL 0 [GRP0:0] [GRP0:1]
* migrator = TMIGR_NONE migrator = TMIGR_NONE
* active = active =
* --> next_expiry = TIMER0 next_expiry = KTIME_MAX
* / \ / \
* CPUs 0 1 2 3
* idle idle idle idle
*
* 5. GRP0:0 is not active, so the new timer has to be propagated to
* GRP1:0. Therefore the GRP1:0 state has to be read. When the stalled value
* (from step 2) is read, the timer is enqueued into GRP1:0, but nothing is
* handed back to CPU0, as it seems that there is still an active child in
* top level group.
*
* LVL 1 [GRP1:0]
* migrator = TMIGR_NONE
* active =
* --> next_expiry = TIMER0
* / \
* LVL 0 [GRP0:0] [GRP0:1]
* migrator = TMIGR_NONE migrator = TMIGR_NONE
* active = active =
* next_expiry = TIMER0 next_expiry = KTIME_MAX
* / \ / \
* CPUs 0 1 2 3
* idle idle idle idle
*
* This is prevented by reading the state when holding the lock (when a new
* timer has to be propagated from idle path)::
*
* CPU2 (tmigr_inactive_up()) CPU0 (tmigr_new_timer_up())
* -------------------------- ---------------------------
* // step 3:
* cmpxchg(&GRP1:0->state);
* tmigr_update_events() {
* spin_lock(&GRP1:0->lock);
* // ... update events ...
* // hand back first expiry when GRP1:0 is idle
* spin_unlock(&GRP1:0->lock);
* // ^^^ release state modification
* }
* tmigr_update_events() {
* spin_lock(&GRP1:0->lock)
* // ^^^ acquire state modification
* group_state = atomic_read(&GRP1:0->state)
* // .... update events ...
* // hand back first expiry when GRP1:0 is idle
* spin_unlock(&GRP1:0->lock) <3>
* // ^^^ makes state visible for other
* // callers of tmigr_new_timer_up()
* }
*
* When CPU0 grabs the lock directly after cmpxchg, the first timer is reported
* back to CPU0 and also later on to CPU2. So no timer is missed. A concurrent
* update of the group state from active path is no problem, as the upcoming CPU
* will take care of the group events.
*
* Required event and timerqueue update after a remote expiry:
* -----------------------------------------------------------
*
* After expiring timers of a remote CPU, a walk through the hierarchy and
* update of events and timerqueues is required. It is obviously needed if there
* is a 'new' global timer but also if there is no new global timer but the
* remote CPU is still idle.
*
* 1. CPU0 and CPU1 are idle and have both a global timer expiring at the same
* time. So both have an event enqueued in the timerqueue of GRP0:0. CPU3 is
* also idle and has no global timer pending. CPU2 is the only active CPU and
* thus also the migrator:
*
* LVL 1 [GRP1:0]
* migrator = GRP0:1
* active = GRP0:1
* --> timerqueue = evt-GRP0:0
* / \
* LVL 0 [GRP0:0] [GRP0:1]
* migrator = TMIGR_NONE migrator = CPU2
* active = active = CPU2
* groupevt.ignore = false groupevt.ignore = true
* groupevt.cpu = CPU0 groupevt.cpu =
* timerqueue = evt-CPU0, timerqueue =
* evt-CPU1
* / \ / \
* CPUs 0 1 2 3
* idle idle active idle
*
* 2. CPU2 starts to expire remote timers. It starts with LVL0 group
* GRP0:1. There is no event queued in the timerqueue, so CPU2 continues with
* the parent of GRP0:1: GRP1:0. In GRP1:0 it dequeues the first event. It
* looks at tmigr_event::cpu struct member and expires the pending timer(s)
* of CPU0.
*
* LVL 1 [GRP1:0]
* migrator = GRP0:1
* active = GRP0:1
* --> timerqueue =
* / \
* LVL 0 [GRP0:0] [GRP0:1]
* migrator = TMIGR_NONE migrator = CPU2
* active = active = CPU2
* groupevt.ignore = false groupevt.ignore = true
* --> groupevt.cpu = CPU0 groupevt.cpu =
* timerqueue = evt-CPU0, timerqueue =
* evt-CPU1
* / \ / \
* CPUs 0 1 2 3
* idle idle active idle
*
* 3. Some work has to be done after expiring the timers of CPU0. If we stop
* here, then CPU1's pending global timer(s) will not expire in time and the
* timerqueue of GRP0:0 has still an event for CPU0 enqueued which has just
* been processed. So it is required to walk the hierarchy from CPU0's point
* of view and update it accordingly. CPU0's event will be removed from the
* timerqueue because it has no pending timer. If CPU0 would have a timer
* pending then it has to expire after CPU1's first timer because all timers
* from this period were just expired. Either way CPU1's event will be first
* in GRP0:0's timerqueue and therefore set in the CPU field of the group
* event which is then enqueued in GRP1:0's timerqueue as GRP0:0 is still not
* active:
*
* LVL 1 [GRP1:0]
* migrator = GRP0:1
* active = GRP0:1
* --> timerqueue = evt-GRP0:0
* / \
* LVL 0 [GRP0:0] [GRP0:1]
* migrator = TMIGR_NONE migrator = CPU2
* active = active = CPU2
* groupevt.ignore = false groupevt.ignore = true
* --> groupevt.cpu = CPU1 groupevt.cpu =
* --> timerqueue = evt-CPU1 timerqueue =
* / \ / \
* CPUs 0 1 2 3
* idle idle active idle
*
* Now CPU2 (migrator) will continue step 2 at GRP1:0 and will expire the
* timer(s) of CPU1.
*
* The hierarchy walk in step 3 can be skipped if the migrator notices that a
* CPU of GRP0:0 is active again. The CPU will mark GRP0:0 active and take care
* of the group as migrator and any needed updates within the hierarchy.
*/
static DEFINE_MUTEX(tmigr_mutex);
static struct list_head *tmigr_level_list __read_mostly;
static unsigned int tmigr_hierarchy_levels __read_mostly;
static unsigned int tmigr_crossnode_level __read_mostly;
static DEFINE_PER_CPU(struct tmigr_cpu, tmigr_cpu);
#define TMIGR_NONE 0xFF
#define BIT_CNT 8
static inline bool tmigr_is_not_available(struct tmigr_cpu *tmc)
{
return !(tmc->tmgroup && tmc->online);
}
/*
* Returns true, when @childmask corresponds to the group migrator or when the
* group is not active - so no migrator is set.
*/
static bool tmigr_check_migrator(struct tmigr_group *group, u8 childmask)
{
union tmigr_state s;
s.state = atomic_read(&group->migr_state);
if ((s.migrator == childmask) || (s.migrator == TMIGR_NONE))
return true;
return false;
}
static bool tmigr_check_migrator_and_lonely(struct tmigr_group *group, u8 childmask)
{
bool lonely, migrator = false;
unsigned long active;
union tmigr_state s;
s.state = atomic_read(&group->migr_state);
if ((s.migrator == childmask) || (s.migrator == TMIGR_NONE))
migrator = true;
active = s.active;
lonely = bitmap_weight(&active, BIT_CNT) <= 1;
return (migrator && lonely);
}
static bool tmigr_check_lonely(struct tmigr_group *group)
{
unsigned long active;
union tmigr_state s;
s.state = atomic_read(&group->migr_state);
active = s.active;
return bitmap_weight(&active, BIT_CNT) <= 1;
}
typedef bool (*up_f)(struct tmigr_group *, struct tmigr_group *, void *);
static void __walk_groups(up_f up, void *data,
struct tmigr_cpu *tmc)
{
struct tmigr_group *child = NULL, *group = tmc->tmgroup;
do {
WARN_ON_ONCE(group->level >= tmigr_hierarchy_levels);
if (up(group, child, data))
break;
child = group;
group = group->parent;
} while (group);
}
static void walk_groups(up_f up, void *data, struct tmigr_cpu *tmc)
{
lockdep_assert_held(&tmc->lock);
__walk_groups(up, data, tmc);
}
/**
* struct tmigr_walk - data required for walking the hierarchy
* @nextexp: Next CPU event expiry information which is handed into
* the timer migration code by the timer code
* (get_next_timer_interrupt())
* @firstexp: Contains the first event expiry information when last
* active CPU of hierarchy is on the way to idle to make
* sure CPU will be back in time.
* @evt: Pointer to tmigr_event which needs to be queued (of idle
* child group)
* @childmask: childmask of child group
* @remote: Is set, when the new timer path is executed in
* tmigr_handle_remote_cpu()
*/
struct tmigr_walk {
u64 nextexp;
u64 firstexp;
struct tmigr_event *evt;
u8 childmask;
bool remote;
};
/**
* struct tmigr_remote_data - data required for remote expiry hierarchy walk
* @basej: timer base in jiffies
* @now: timer base monotonic
* @firstexp: returns expiry of the first timer in the idle timer
* migration hierarchy to make sure the timer is handled in
* time; it is stored in the per CPU tmigr_cpu struct of
* CPU which expires remote timers
* @childmask: childmask of child group
* @check: is set if there is the need to handle remote timers;
* required in tmigr_requires_handle_remote() only
* @tmc_active: this flag indicates, whether the CPU which triggers
* the hierarchy walk is !idle in the timer migration
* hierarchy. When the CPU is idle and the whole hierarchy is
* idle, only the first event of the top level has to be
* considered.
*/
struct tmigr_remote_data {
unsigned long basej;
u64 now;
u64 firstexp;
u8 childmask;
bool check;
bool tmc_active;
};
/*
* Returns the next event of the timerqueue @group->events
*
* Removes timers with ignore flag and update next_expiry of the group. Values
* of the group event are updated in tmigr_update_events() only.
*/
static struct tmigr_event *tmigr_next_groupevt(struct tmigr_group *group)
{
struct timerqueue_node *node = NULL;
struct tmigr_event *evt = NULL;
lockdep_assert_held(&group->lock);
WRITE_ONCE(group->next_expiry, KTIME_MAX);
while ((node = timerqueue_getnext(&group->events))) {
evt = container_of(node, struct tmigr_event, nextevt);
if (!evt->ignore) {
WRITE_ONCE(group->next_expiry, evt->nextevt.expires);
return evt;
}
/*
* Remove next timers with ignore flag, because the group lock
* is held anyway
*/
if (!timerqueue_del(&group->events, node))
break;
}
return NULL;
}
/*
* Return the next event (with the expiry equal or before @now)
*
* Event, which is returned, is also removed from the queue.
*/
static struct tmigr_event *tmigr_next_expired_groupevt(struct tmigr_group *group,
u64 now)
{
struct tmigr_event *evt = tmigr_next_groupevt(group);
if (!evt || now < evt->nextevt.expires)
return NULL;
/*
* The event is ready to expire. Remove it and update next group event.
*/
timerqueue_del(&group->events, &evt->nextevt);
tmigr_next_groupevt(group);
return evt;
}
static u64 tmigr_next_groupevt_expires(struct tmigr_group *group)
{
struct tmigr_event *evt;
evt = tmigr_next_groupevt(group);
if (!evt)
return KTIME_MAX;
else
return evt->nextevt.expires;
}
static bool tmigr_active_up(struct tmigr_group *group,
struct tmigr_group *child,
void *ptr)
{
union tmigr_state curstate, newstate;
struct tmigr_walk *data = ptr;
bool walk_done;
u8 childmask;
childmask = data->childmask;
/*
* No memory barrier is required here in contrast to
* tmigr_inactive_up(), as the group state change does not depend on the
* child state.
*/
curstate.state = atomic_read(&group->migr_state);
do {
newstate = curstate;
walk_done = true;
if (newstate.migrator == TMIGR_NONE) {
newstate.migrator = childmask;
/* Changes need to be propagated */
walk_done = false;
}
newstate.active |= childmask;
newstate.seq++;
} while (!atomic_try_cmpxchg(&group->migr_state, &curstate.state, newstate.state));
if ((walk_done == false) && group->parent)
data->childmask = group->childmask;
/*
* The group is active (again). The group event might be still queued
* into the parent group's timerqueue but can now be handled by the
* migrator of this group. Therefore the ignore flag for the group event
* is updated to reflect this.
*
* The update of the ignore flag in the active path is done lockless. In
* worst case the migrator of the parent group observes the change too
* late and expires remotely all events belonging to this group. The
* lock is held while updating the ignore flag in idle path. So this
* state change will not be lost.
*/
group->groupevt.ignore = true;
trace_tmigr_group_set_cpu_active(group, newstate, childmask);
return walk_done;
}
static void __tmigr_cpu_activate(struct tmigr_cpu *tmc)
{
struct tmigr_walk data;
data.childmask = tmc->childmask;
trace_tmigr_cpu_active(tmc);
tmc->cpuevt.ignore = true;
WRITE_ONCE(tmc->wakeup, KTIME_MAX);
walk_groups(&tmigr_active_up, &data, tmc);
}
/**
* tmigr_cpu_activate() - set this CPU active in timer migration hierarchy
*
* Call site timer_clear_idle() is called with interrupts disabled.
*/
void tmigr_cpu_activate(void)
{
struct tmigr_cpu *tmc = this_cpu_ptr(&tmigr_cpu);
if (tmigr_is_not_available(tmc))
return;
if (WARN_ON_ONCE(!tmc->idle))
return;
raw_spin_lock(&tmc->lock);
tmc->idle = false;
__tmigr_cpu_activate(tmc);
raw_spin_unlock(&tmc->lock);
}
/*
* Returns true, if there is nothing to be propagated to the next level
*
* @data->firstexp is set to expiry of first gobal event of the (top level of
* the) hierarchy, but only when hierarchy is completely idle.
*
* The child and group states need to be read under the lock, to prevent a race
* against a concurrent tmigr_inactive_up() run when the last CPU goes idle. See
* also section "Prevent race between new event and last CPU going inactive" in
* the documentation at the top.
*
* This is the only place where the group event expiry value is set.
*/
static
bool tmigr_update_events(struct tmigr_group *group, struct tmigr_group *child,
struct tmigr_walk *data)
{
struct tmigr_event *evt, *first_childevt;
union tmigr_state childstate, groupstate;
bool remote = data->remote;
bool walk_done = false;
u64 nextexp;
if (child) {
raw_spin_lock(&child->lock);
raw_spin_lock_nested(&group->lock, SINGLE_DEPTH_NESTING);
childstate.state = atomic_read(&child->migr_state);
groupstate.state = atomic_read(&group->migr_state);
if (childstate.active) {
walk_done = true;
goto unlock;
}
first_childevt = tmigr_next_groupevt(child);
nextexp = child->next_expiry;
evt = &child->groupevt;
evt->ignore = (nextexp == KTIME_MAX) ? true : false;
} else {
nextexp = data->nextexp;
first_childevt = evt = data->evt;
raw_spin_lock(&group->lock);
childstate.state = 0;
groupstate.state = atomic_read(&group->migr_state);
}
/*
* If the child event is already queued in the group, remove it from the
* queue when the expiry time changed only or when it could be ignored.
*/
if (timerqueue_node_queued(&evt->nextevt)) {
if ((evt->nextevt.expires == nextexp) && !evt->ignore)
goto check_toplvl;
if (!timerqueue_del(&group->events, &evt->nextevt))
WRITE_ONCE(group->next_expiry, KTIME_MAX);
}
if (evt->ignore) {
/*
* When the next child event could be ignored (nextexp is
* KTIME_MAX) and there was no remote timer handling before or
* the group is already active, there is no need to walk the
* hierarchy even if there is a parent group.
*
* The other way round: even if the event could be ignored, but
* if a remote timer handling was executed before and the group
* is not active, walking the hierarchy is required to not miss
* an enqueued timer in the non active group. The enqueued timer
* of the group needs to be propagated to a higher level to
* ensure it is handled.
*/
if (!remote || groupstate.active)
walk_done = true;
} else {
evt->nextevt.expires = nextexp;
evt->cpu = first_childevt->cpu;
if (timerqueue_add(&group->events, &evt->nextevt))
WRITE_ONCE(group->next_expiry, nextexp);
}
check_toplvl:
if (!group->parent && (groupstate.migrator == TMIGR_NONE)) {
walk_done = true;
/*
* Nothing to do when update was done during remote timer
* handling. First timer in top level group which needs to be
* handled when top level group is not active, is calculated
* directly in tmigr_handle_remote_up().
*/
if (remote)
goto unlock;
/*
* The top level group is idle and it has to be ensured the
* global timers are handled in time. (This could be optimized
* by keeping track of the last global scheduled event and only
* arming it on the CPU if the new event is earlier. Not sure if
* its worth the complexity.)
*/
data->firstexp = tmigr_next_groupevt_expires(group);
}
trace_tmigr_update_events(child, group, childstate, groupstate,
nextexp);
unlock:
raw_spin_unlock(&group->lock);
if (child)
raw_spin_unlock(&child->lock);
return walk_done;
}
static bool tmigr_new_timer_up(struct tmigr_group *group,
struct tmigr_group *child,
void *ptr)
{
struct tmigr_walk *data = ptr;
return tmigr_update_events(group, child, data);
}
/*
* Returns the expiry of the next timer that needs to be handled. KTIME_MAX is
* returned, if an active CPU will handle all the timer migration hierarchy
* timers.
*/
static u64 tmigr_new_timer(struct tmigr_cpu *tmc, u64 nextexp)
{
struct tmigr_walk data = { .nextexp = nextexp,
.firstexp = KTIME_MAX,
.evt = &tmc->cpuevt };
lockdep_assert_held(&tmc->lock);
if (tmc->remote)
return KTIME_MAX;
trace_tmigr_cpu_new_timer(tmc);
tmc->cpuevt.ignore = false;
data.remote = false;
walk_groups(&tmigr_new_timer_up, &data, tmc);
/* If there is a new first global event, make sure it is handled */
return data.firstexp;
}
static void tmigr_handle_remote_cpu(unsigned int cpu, u64 now,
unsigned long jif)
{
struct timer_events tevt;
struct tmigr_walk data;
struct tmigr_cpu *tmc;
tmc = per_cpu_ptr(&tmigr_cpu, cpu);
raw_spin_lock_irq(&tmc->lock);
/*
* If the remote CPU is offline then the timers have been migrated to
* another CPU.
*
* If tmigr_cpu::remote is set, at the moment another CPU already
* expires the timers of the remote CPU.
*
* If tmigr_event::ignore is set, then the CPU returns from idle and
* takes care of its timers.
*
* If the next event expires in the future, then the event has been
* updated and there are no timers to expire right now. The CPU which
* updated the event takes care when hierarchy is completely
* idle. Otherwise the migrator does it as the event is enqueued.
*/
if (!tmc->online || tmc->remote || tmc->cpuevt.ignore ||
now < tmc->cpuevt.nextevt.expires) {
raw_spin_unlock_irq(&tmc->lock);
return;
}
trace_tmigr_handle_remote_cpu(tmc);
tmc->remote = true;
WRITE_ONCE(tmc->wakeup, KTIME_MAX);
/* Drop the lock to allow the remote CPU to exit idle */
raw_spin_unlock_irq(&tmc->lock);
if (cpu != smp_processor_id())
timer_expire_remote(cpu);
/*
* Lock ordering needs to be preserved - timer_base locks before tmigr
* related locks (see section "Locking rules" in the documentation at
* the top). During fetching the next timer interrupt, also tmc->lock
* needs to be held. Otherwise there is a possible race window against
* the CPU itself when it comes out of idle, updates the first timer in
* the hierarchy and goes back to idle.
*
* timer base locks are dropped as fast as possible: After checking
* whether the remote CPU went offline in the meantime and after
* fetching the next remote timer interrupt. Dropping the locks as fast
* as possible keeps the locking region small and prevents holding
* several (unnecessary) locks during walking the hierarchy for updating
* the timerqueue and group events.
*/
local_irq_disable();
timer_lock_remote_bases(cpu);
raw_spin_lock(&tmc->lock);
/*
* When the CPU went offline in the meantime, no hierarchy walk has to
* be done for updating the queued events, because the walk was
* already done during marking the CPU offline in the hierarchy.
*
* When the CPU is no longer idle, the CPU takes care of the timers and
* also of the timers in the hierarchy.
*
* (See also section "Required event and timerqueue update after a
* remote expiry" in the documentation at the top)
*/
if (!tmc->online || !tmc->idle) {
timer_unlock_remote_bases(cpu);
goto unlock;
}
/* next event of CPU */
fetch_next_timer_interrupt_remote(jif, now, &tevt, cpu);
timer_unlock_remote_bases(cpu);
data.nextexp = tevt.global;
data.firstexp = KTIME_MAX;
data.evt = &tmc->cpuevt;
data.remote = true;
/*
* The update is done even when there is no 'new' global timer pending
* on the remote CPU (see section "Required event and timerqueue update
* after a remote expiry" in the documentation at the top)
*/
walk_groups(&tmigr_new_timer_up, &data, tmc);
unlock:
tmc->remote = false;
raw_spin_unlock_irq(&tmc->lock);
}
static bool tmigr_handle_remote_up(struct tmigr_group *group,
struct tmigr_group *child,
void *ptr)
{
struct tmigr_remote_data *data = ptr;
struct tmigr_event *evt;
unsigned long jif;
u8 childmask;
u64 now;
jif = data->basej;
now = data->now;
childmask = data->childmask;
trace_tmigr_handle_remote(group);
again:
/*
* Handle the group only if @childmask is the migrator or if the
* group has no migrator. Otherwise the group is active and is
* handled by its own migrator.
*/
if (!tmigr_check_migrator(group, childmask))
return true;
raw_spin_lock_irq(&group->lock);
evt = tmigr_next_expired_groupevt(group, now);
if (evt) {
unsigned int remote_cpu = evt->cpu;
raw_spin_unlock_irq(&group->lock);
tmigr_handle_remote_cpu(remote_cpu, now, jif);
/* check if there is another event, that needs to be handled */
goto again;
}
/*
* Update of childmask for the next level and keep track of the expiry
* of the first event that needs to be handled (group->next_expiry was
* updated by tmigr_next_expired_groupevt(), next was set by
* tmigr_handle_remote_cpu()).
*/
data->childmask = group->childmask;
data->firstexp = group->next_expiry;
raw_spin_unlock_irq(&group->lock);
return false;
}
/**
* tmigr_handle_remote() - Handle global timers of remote idle CPUs
*
* Called from the timer soft interrupt with interrupts enabled.
*/
void tmigr_handle_remote(void)
{
struct tmigr_cpu *tmc = this_cpu_ptr(&tmigr_cpu);
struct tmigr_remote_data data;
if (tmigr_is_not_available(tmc))
return;
data.childmask = tmc->childmask;
data.firstexp = KTIME_MAX;
/*
* NOTE: This is a doubled check because the migrator test will be done
* in tmigr_handle_remote_up() anyway. Keep this check to speed up the
* return when nothing has to be done.
*/
if (!tmigr_check_migrator(tmc->tmgroup, tmc->childmask))
return;
data.now = get_jiffies_update(&data.basej);
/*
* Update @tmc->wakeup only at the end and do not reset @tmc->wakeup to
* KTIME_MAX. Even if tmc->lock is not held during the whole remote
* handling, tmc->wakeup is fine to be stale as it is called in
* interrupt context and tick_nohz_next_event() is executed in interrupt
* exit path only after processing the last pending interrupt.
*/
__walk_groups(&tmigr_handle_remote_up, &data, tmc);
raw_spin_lock_irq(&tmc->lock);
WRITE_ONCE(tmc->wakeup, data.firstexp);
raw_spin_unlock_irq(&tmc->lock);
}
static bool tmigr_requires_handle_remote_up(struct tmigr_group *group,
struct tmigr_group *child,
void *ptr)
{
struct tmigr_remote_data *data = ptr;
u8 childmask;
childmask = data->childmask;
/*
* Handle the group only if the child is the migrator or if the group
* has no migrator. Otherwise the group is active and is handled by its
* own migrator.
*/
if (!tmigr_check_migrator(group, childmask))
return true;
/*
* When there is a parent group and the CPU which triggered the
* hierarchy walk is not active, proceed the walk to reach the top level
* group before reading the next_expiry value.
*/
if (group->parent && !data->tmc_active)
goto out;
/*
* The lock is required on 32bit architectures to read the variable
* consistently with a concurrent writer. On 64bit the lock is not
* required because the read operation is not split and so it is always
* consistent.
*/
if (IS_ENABLED(CONFIG_64BIT)) {
data->firstexp = READ_ONCE(group->next_expiry);
if (data->now >= data->firstexp) {
data->check = true;
return true;
}
} else {
raw_spin_lock(&group->lock);
data->firstexp = group->next_expiry;
if (data->now >= group->next_expiry) {
data->check = true;
raw_spin_unlock(&group->lock);
return true;
}
raw_spin_unlock(&group->lock);
}
out:
/* Update of childmask for the next level */
data->childmask = group->childmask;
return false;
}
/**
* tmigr_requires_handle_remote() - Check the need of remote timer handling
*
* Must be called with interrupts disabled.
*/
bool tmigr_requires_handle_remote(void)
{
struct tmigr_cpu *tmc = this_cpu_ptr(&tmigr_cpu);
struct tmigr_remote_data data;
unsigned long jif;
bool ret = false;
if (tmigr_is_not_available(tmc))
return ret;
data.now = get_jiffies_update(&jif);
data.childmask = tmc->childmask;
data.firstexp = KTIME_MAX;
data.tmc_active = !tmc->idle;
data.check = false;
/*
* If the CPU is active, walk the hierarchy to check whether a remote
* expiry is required.
*
* Check is done lockless as interrupts are disabled and @tmc->idle is
* set only by the local CPU.
*/
if (!tmc->idle) {
__walk_groups(&tmigr_requires_handle_remote_up, &data, tmc);
return data.check;
}
/*
* When the CPU is idle, compare @tmc->wakeup with @data.now. The lock
* is required on 32bit architectures to read the variable consistently
* with a concurrent writer. On 64bit the lock is not required because
* the read operation is not split and so it is always consistent.
*/
if (IS_ENABLED(CONFIG_64BIT)) {
if (data.now >= READ_ONCE(tmc->wakeup))
return true;
} else {
raw_spin_lock(&tmc->lock);
if (data.now >= tmc->wakeup)
ret = true;
raw_spin_unlock(&tmc->lock);
}
return ret;
}
/**
* tmigr_cpu_new_timer() - enqueue next global timer into hierarchy (idle tmc)
* @nextexp: Next expiry of global timer (or KTIME_MAX if not)
*
* The CPU is already deactivated in the timer migration
* hierarchy. tick_nohz_get_sleep_length() calls tick_nohz_next_event()
* and thereby the timer idle path is executed once more. @tmc->wakeup
* holds the first timer, when the timer migration hierarchy is
* completely idle.
*
* Returns the first timer that needs to be handled by this CPU or KTIME_MAX if
* nothing needs to be done.
*/
u64 tmigr_cpu_new_timer(u64 nextexp)
{
struct tmigr_cpu *tmc = this_cpu_ptr(&tmigr_cpu);
u64 ret;
if (tmigr_is_not_available(tmc))
return nextexp;
raw_spin_lock(&tmc->lock);
ret = READ_ONCE(tmc->wakeup);
if (nextexp != KTIME_MAX) {
if (nextexp != tmc->cpuevt.nextevt.expires ||
tmc->cpuevt.ignore) {
ret = tmigr_new_timer(tmc, nextexp);
}
}
/*
* Make sure the reevaluation of timers in idle path will not miss an
* event.
*/
WRITE_ONCE(tmc->wakeup, ret);
trace_tmigr_cpu_new_timer_idle(tmc, nextexp);
raw_spin_unlock(&tmc->lock);
return ret;
}
static bool tmigr_inactive_up(struct tmigr_group *group,
struct tmigr_group *child,
void *ptr)
{
union tmigr_state curstate, newstate, childstate;
struct tmigr_walk *data = ptr;
bool walk_done;
u8 childmask;
childmask = data->childmask;
childstate.state = 0;
/*
* The memory barrier is paired with the cmpxchg() in tmigr_active_up()
* to make sure the updates of child and group states are ordered. The
* ordering is mandatory, as the group state change depends on the child
* state.
*/
curstate.state = atomic_read_acquire(&group->migr_state);
for (;;) {
if (child)
childstate.state = atomic_read(&child->migr_state);
newstate = curstate;
walk_done = true;
/* Reset active bit when the child is no longer active */
if (!childstate.active)
newstate.active &= ~childmask;
if (newstate.migrator == childmask) {
/*
* Find a new migrator for the group, because the child
* group is idle!
*/
if (!childstate.active) {
unsigned long new_migr_bit, active = newstate.active;
new_migr_bit = find_first_bit(&active, BIT_CNT);
if (new_migr_bit != BIT_CNT) {
newstate.migrator = BIT(new_migr_bit);
} else {
newstate.migrator = TMIGR_NONE;
/* Changes need to be propagated */
walk_done = false;
}
}
}
newstate.seq++;
WARN_ON_ONCE((newstate.migrator != TMIGR_NONE) && !(newstate.active));
if (atomic_try_cmpxchg(&group->migr_state, &curstate.state,
newstate.state))
break;
/*
* The memory barrier is paired with the cmpxchg() in
* tmigr_active_up() to make sure the updates of child and group
* states are ordered. It is required only when the above
* try_cmpxchg() fails.
*/
smp_mb__after_atomic();
}
data->remote = false;
/* Event Handling */
tmigr_update_events(group, child, data);
if (group->parent && (walk_done == false))
data->childmask = group->childmask;
/*
* data->firstexp was set by tmigr_update_events() and contains the
* expiry of the first global event which needs to be handled. It
* differs from KTIME_MAX if:
* - group is the top level group and
* - group is idle (which means CPU was the last active CPU in the
* hierarchy) and
* - there is a pending event in the hierarchy
*/
WARN_ON_ONCE(data->firstexp != KTIME_MAX && group->parent);
trace_tmigr_group_set_cpu_inactive(group, newstate, childmask);
return walk_done;
}
static u64 __tmigr_cpu_deactivate(struct tmigr_cpu *tmc, u64 nextexp)
{
struct tmigr_walk data = { .nextexp = nextexp,
.firstexp = KTIME_MAX,
.evt = &tmc->cpuevt,
.childmask = tmc->childmask };
/*
* If nextexp is KTIME_MAX, the CPU event will be ignored because the
* local timer expires before the global timer, no global timer is set
* or CPU goes offline.
*/
if (nextexp != KTIME_MAX)
tmc->cpuevt.ignore = false;
walk_groups(&tmigr_inactive_up, &data, tmc);
return data.firstexp;
}
/**
* tmigr_cpu_deactivate() - Put current CPU into inactive state
* @nextexp: The next global timer expiry of the current CPU
*
* Must be called with interrupts disabled.
*
* Return: the next event expiry of the current CPU or the next event expiry
* from the hierarchy if this CPU is the top level migrator or the hierarchy is
* completely idle.
*/
u64 tmigr_cpu_deactivate(u64 nextexp)
{
struct tmigr_cpu *tmc = this_cpu_ptr(&tmigr_cpu);
u64 ret;
if (tmigr_is_not_available(tmc))
return nextexp;
raw_spin_lock(&tmc->lock);
ret = __tmigr_cpu_deactivate(tmc, nextexp);
tmc->idle = true;
/*
* Make sure the reevaluation of timers in idle path will not miss an
* event.
*/
WRITE_ONCE(tmc->wakeup, ret);
trace_tmigr_cpu_idle(tmc, nextexp);
raw_spin_unlock(&tmc->lock);
return ret;
}
/**
* tmigr_quick_check() - Quick forecast of next tmigr event when CPU wants to
* go idle
* @nextevt: The next global timer expiry of the current CPU
*
* Return:
* * KTIME_MAX - when it is probable that nothing has to be done (not
* the only one in the level 0 group; and if it is the
* only one in level 0 group, but there are more than a
* single group active on the way to top level)
* * nextevt - when CPU is offline and has to handle timer on his own
* or when on the way to top in every group only a single
* child is active but @nextevt is before the lowest
* next_expiry encountered while walking up to top level.
* * next_expiry - value of lowest expiry encountered while walking groups
* if only a single child is active on each and @nextevt
* is after this lowest expiry.
*/
u64 tmigr_quick_check(u64 nextevt)
{
struct tmigr_cpu *tmc = this_cpu_ptr(&tmigr_cpu);
struct tmigr_group *group = tmc->tmgroup;
if (tmigr_is_not_available(tmc))
return nextevt;
if (WARN_ON_ONCE(tmc->idle))
return nextevt;
if (!tmigr_check_migrator_and_lonely(tmc->tmgroup, tmc->childmask))
return KTIME_MAX;
do {
if (!tmigr_check_lonely(group)) {
return KTIME_MAX;
} else {
/*
* Since current CPU is active, events may not be sorted
* from bottom to the top because the CPU's event is ignored
* up to the top and its sibling's events not propagated upwards.
* Thus keep track of the lowest observed expiry.
*/
nextevt = min_t(u64, nextevt, READ_ONCE(group->next_expiry));
if (!group->parent)
return nextevt;
}
group = group->parent;
} while (group);
return KTIME_MAX;
}
static void tmigr_init_group(struct tmigr_group *group, unsigned int lvl,
int node)
{
union tmigr_state s;
raw_spin_lock_init(&group->lock);
group->level = lvl;
group->numa_node = lvl < tmigr_crossnode_level ? node : NUMA_NO_NODE;
group->num_children = 0;
s.migrator = TMIGR_NONE;
s.active = 0;
s.seq = 0;
atomic_set(&group->migr_state, s.state);
timerqueue_init_head(&group->events);
timerqueue_init(&group->groupevt.nextevt);
group->groupevt.nextevt.expires = KTIME_MAX;
WRITE_ONCE(group->next_expiry, KTIME_MAX);
group->groupevt.ignore = true;
}
static struct tmigr_group *tmigr_get_group(unsigned int cpu, int node,
unsigned int lvl)
{
struct tmigr_group *tmp, *group = NULL;
lockdep_assert_held(&tmigr_mutex);
/* Try to attach to an existing group first */
list_for_each_entry(tmp, &tmigr_level_list[lvl], list) {
/*
* If @lvl is below the cross NUMA node level, check whether
* this group belongs to the same NUMA node.
*/
if (lvl < tmigr_crossnode_level && tmp->numa_node != node)
continue;
/* Capacity left? */
if (tmp->num_children >= TMIGR_CHILDREN_PER_GROUP)
continue;
/*
* TODO: A possible further improvement: Make sure that all CPU
* siblings end up in the same group of the lowest level of the
* hierarchy. Rely on the topology sibling mask would be a
* reasonable solution.
*/
group = tmp;
break;
}
if (group)
return group;
/* Allocate and set up a new group */
group = kzalloc_node(sizeof(*group), GFP_KERNEL, node);
if (!group)
return ERR_PTR(-ENOMEM);
tmigr_init_group(group, lvl, node);
/* Setup successful. Add it to the hierarchy */
list_add(&group->list, &tmigr_level_list[lvl]);
trace_tmigr_group_set(group);
return group;
}
static void tmigr_connect_child_parent(struct tmigr_group *child,
struct tmigr_group *parent)
{
union tmigr_state childstate;
raw_spin_lock_irq(&child->lock);
raw_spin_lock_nested(&parent->lock, SINGLE_DEPTH_NESTING);
child->parent = parent;
child->childmask = BIT(parent->num_children++);
raw_spin_unlock(&parent->lock);
raw_spin_unlock_irq(&child->lock);
trace_tmigr_connect_child_parent(child);
/*
* To prevent inconsistent states, active children need to be active in
* the new parent as well. Inactive children are already marked inactive
* in the parent group:
*
* * When new groups were created by tmigr_setup_groups() starting from
* the lowest level (and not higher then one level below the current
* top level), then they are not active. They will be set active when
* the new online CPU comes active.
*
* * But if a new group above the current top level is required, it is
* mandatory to propagate the active state of the already existing
* child to the new parent. So tmigr_connect_child_parent() is
* executed with the formerly top level group (child) and the newly
* created group (parent).
*/
childstate.state = atomic_read(&child->migr_state);
if (childstate.migrator != TMIGR_NONE) {
struct tmigr_walk data;
data.childmask = child->childmask;
/*
* There is only one new level per time. When connecting the
* child and the parent and set the child active when the parent
* is inactive, the parent needs to be the uppermost
* level. Otherwise there went something wrong!
*/
WARN_ON(!tmigr_active_up(parent, child, &data) && parent->parent);
}
}
static int tmigr_setup_groups(unsigned int cpu, unsigned int node)
{
struct tmigr_group *group, *child, **stack;
int top = 0, err = 0, i = 0;
struct list_head *lvllist;
stack = kcalloc(tmigr_hierarchy_levels, sizeof(*stack), GFP_KERNEL);
if (!stack)
return -ENOMEM;
do {
group = tmigr_get_group(cpu, node, i);
if (IS_ERR(group)) {
err = PTR_ERR(group);
break;
}
top = i;
stack[i++] = group;
/*
* When booting only less CPUs of a system than CPUs are
* available, not all calculated hierarchy levels are required.
*
* The loop is aborted as soon as the highest level, which might
* be different from tmigr_hierarchy_levels, contains only a
* single group.
*/
if (group->parent || i == tmigr_hierarchy_levels ||
(list_empty(&tmigr_level_list[i]) &&
list_is_singular(&tmigr_level_list[i - 1])))
break;
} while (i < tmigr_hierarchy_levels);
do {
group = stack[--i];
if (err < 0) {
list_del(&group->list);
kfree(group);
continue;
}
WARN_ON_ONCE(i != group->level);
/*
* Update tmc -> group / child -> group connection
*/
if (i == 0) {
struct tmigr_cpu *tmc = this_cpu_ptr(&tmigr_cpu);
raw_spin_lock_irq(&group->lock);
tmc->tmgroup = group;
tmc->childmask = BIT(group->num_children++);
raw_spin_unlock_irq(&group->lock);
trace_tmigr_connect_cpu_parent(tmc);
/* There are no children that need to be connected */
continue;
} else {
child = stack[i - 1];
tmigr_connect_child_parent(child, group);
}
/* check if uppermost level was newly created */
if (top != i)
continue;
WARN_ON_ONCE(top == 0);
lvllist = &tmigr_level_list[top];
if (group->num_children == 1 && list_is_singular(lvllist)) {
lvllist = &tmigr_level_list[top - 1];
list_for_each_entry(child, lvllist, list) {
if (child->parent)
continue;
tmigr_connect_child_parent(child, group);
}
}
} while (i > 0);
kfree(stack);
return err;
}
static int tmigr_add_cpu(unsigned int cpu)
{
int node = cpu_to_node(cpu);
int ret;
mutex_lock(&tmigr_mutex);
ret = tmigr_setup_groups(cpu, node);
mutex_unlock(&tmigr_mutex);
return ret;
}
static int tmigr_cpu_online(unsigned int cpu)
{
struct tmigr_cpu *tmc = this_cpu_ptr(&tmigr_cpu);
int ret;
/* First online attempt? Initialize CPU data */
if (!tmc->tmgroup) {
raw_spin_lock_init(&tmc->lock);
ret = tmigr_add_cpu(cpu);
if (ret < 0)
return ret;
if (tmc->childmask == 0)
return -EINVAL;
timerqueue_init(&tmc->cpuevt.nextevt);
tmc->cpuevt.nextevt.expires = KTIME_MAX;
tmc->cpuevt.ignore = true;
tmc->cpuevt.cpu = cpu;
tmc->remote = false;
WRITE_ONCE(tmc->wakeup, KTIME_MAX);
}
raw_spin_lock_irq(&tmc->lock);
trace_tmigr_cpu_online(tmc);
tmc->idle = timer_base_is_idle();
if (!tmc->idle)
__tmigr_cpu_activate(tmc);
tmc->online = true;
raw_spin_unlock_irq(&tmc->lock);
return 0;
}
/*
* tmigr_trigger_active() - trigger a CPU to become active again
*
* This function is executed on a CPU which is part of cpu_online_mask, when the
* last active CPU in the hierarchy is offlining. With this, it is ensured that
* the other CPU is active and takes over the migrator duty.
*/
static long tmigr_trigger_active(void *unused)
{
struct tmigr_cpu *tmc = this_cpu_ptr(&tmigr_cpu);
WARN_ON_ONCE(!tmc->online || tmc->idle);
return 0;
}
static int tmigr_cpu_offline(unsigned int cpu)
{
struct tmigr_cpu *tmc = this_cpu_ptr(&tmigr_cpu);
int migrator;
u64 firstexp;
raw_spin_lock_irq(&tmc->lock);
tmc->online = false;
WRITE_ONCE(tmc->wakeup, KTIME_MAX);
/*
* CPU has to handle the local events on his own, when on the way to
* offline; Therefore nextevt value is set to KTIME_MAX
*/
firstexp = __tmigr_cpu_deactivate(tmc, KTIME_MAX);
trace_tmigr_cpu_offline(tmc);
raw_spin_unlock_irq(&tmc->lock);
if (firstexp != KTIME_MAX) {
migrator = cpumask_any_but(cpu_online_mask, cpu);
work_on_cpu(migrator, tmigr_trigger_active, NULL);
}
return 0;
}
static int __init tmigr_init(void)
{
unsigned int cpulvl, nodelvl, cpus_per_node, i;
unsigned int nnodes = num_possible_nodes();
unsigned int ncpus = num_possible_cpus();
int ret = -ENOMEM;
BUILD_BUG_ON_NOT_POWER_OF_2(TMIGR_CHILDREN_PER_GROUP);
/* Nothing to do if running on UP */
if (ncpus == 1)
return 0;
/*
* Calculate the required hierarchy levels. Unfortunately there is no
* reliable information available, unless all possible CPUs have been
* brought up and all NUMA nodes are populated.
*
* Estimate the number of levels with the number of possible nodes and
* the number of possible CPUs. Assume CPUs are spread evenly across
* nodes. We cannot rely on cpumask_of_node() because it only works for
* online CPUs.
*/
cpus_per_node = DIV_ROUND_UP(ncpus, nnodes);
/* Calc the hierarchy levels required to hold the CPUs of a node */
cpulvl = DIV_ROUND_UP(order_base_2(cpus_per_node),
ilog2(TMIGR_CHILDREN_PER_GROUP));
/* Calculate the extra levels to connect all nodes */
nodelvl = DIV_ROUND_UP(order_base_2(nnodes),
ilog2(TMIGR_CHILDREN_PER_GROUP));
tmigr_hierarchy_levels = cpulvl + nodelvl;
/*
* If a NUMA node spawns more than one CPU level group then the next
* level(s) of the hierarchy contains groups which handle all CPU groups
* of the same NUMA node. The level above goes across NUMA nodes. Store
* this information for the setup code to decide in which level node
* matching is no longer required.
*/
tmigr_crossnode_level = cpulvl;
tmigr_level_list = kcalloc(tmigr_hierarchy_levels, sizeof(struct list_head), GFP_KERNEL);
if (!tmigr_level_list)
goto err;
for (i = 0; i < tmigr_hierarchy_levels; i++)
INIT_LIST_HEAD(&tmigr_level_list[i]);
pr_info("Timer migration: %d hierarchy levels; %d children per group;"
" %d crossnode level\n",
tmigr_hierarchy_levels, TMIGR_CHILDREN_PER_GROUP,
tmigr_crossnode_level);
ret = cpuhp_setup_state(CPUHP_AP_TMIGR_ONLINE, "tmigr:online",
tmigr_cpu_online, tmigr_cpu_offline);
if (ret)
goto err;
return 0;
err:
pr_err("Timer migration setup failed\n");
return ret;
}
late_initcall(tmigr_init);