| What: /sys/class/firmware/.../data |
| Date: July 2022 |
| KernelVersion: 5.19 |
| Contact: Russ Weight <russell.h.weight@intel.com> |
| Description: The data sysfs file is used for firmware-fallback and for |
| firmware uploads. Cat a firmware image to this sysfs file |
| after you echo 1 to the loading sysfs file. When the firmware |
| image write is complete, echo 0 to the loading sysfs file. This |
| sequence will signal the completion of the firmware write and |
| signal the lower-level driver that the firmware data is |
| available. |
| |
| What: /sys/class/firmware/.../cancel |
| Date: July 2022 |
| KernelVersion: 5.19 |
| Contact: Russ Weight <russell.h.weight@intel.com> |
| Description: Write-only. For firmware uploads, write a "1" to this file to |
| request that the transfer of firmware data to the lower-level |
| device be canceled. This request will be rejected (EBUSY) if |
| the update cannot be canceled (e.g. a FLASH write is in |
| progress) or (ENODEV) if there is no firmware update in progress. |
| |
| What: /sys/class/firmware/.../error |
| Date: July 2022 |
| KernelVersion: 5.19 |
| Contact: Russ Weight <russell.h.weight@intel.com> |
| Description: Read-only. Returns a string describing a failed firmware |
| upload. This string will be in the form of <STATUS>:<ERROR>, |
| where <STATUS> will be one of the status strings described |
| for the status sysfs file and <ERROR> will be one of the |
| following: "hw-error", "timeout", "user-abort", "device-busy", |
| "invalid-file-size", "read-write-error", "flash-wearout". The |
| error sysfs file is only meaningful when the current firmware |
| upload status is "idle". If this file is read while a firmware |
| transfer is in progress, then the read will fail with EBUSY. |
| |
| What: /sys/class/firmware/.../loading |
| Date: July 2022 |
| KernelVersion: 5.19 |
| Contact: Russ Weight <russell.h.weight@intel.com> |
| Description: The loading sysfs file is used for both firmware-fallback and |
| for firmware uploads. Echo 1 onto the loading file to indicate |
| you are writing a firmware file to the data sysfs node. Echo |
| -1 onto this file to abort the data write or echo 0 onto this |
| file to indicate that the write is complete. For firmware |
| uploads, the zero value also triggers the transfer of the |
| firmware data to the lower-level device driver. |
| |
| What: /sys/class/firmware/.../remaining_size |
| Date: July 2022 |
| KernelVersion: 5.19 |
| Contact: Russ Weight <russell.h.weight@intel.com> |
| Description: Read-only. For firmware upload, this file contains the size |
| of the firmware data that remains to be transferred to the |
| lower-level device driver. The size value is initialized to |
| the full size of the firmware image that was previously |
| written to the data sysfs file. This value is periodically |
| updated during the "transferring" phase of the firmware |
| upload. |
| Format: "%u". |
| |
| What: /sys/class/firmware/.../status |
| Date: July 2022 |
| KernelVersion: 5.19 |
| Contact: Russ Weight <russell.h.weight@intel.com> |
| Description: Read-only. Returns a string describing the current status of |
| a firmware upload. The string will be one of the following: |
| idle, "receiving", "preparing", "transferring", "programming". |
| |
| What: /sys/class/firmware/.../timeout |
| Date: July 2022 |
| KernelVersion: 5.19 |
| Contact: Russ Weight <russell.h.weight@intel.com> |
| Description: This file supports the timeout mechanism for firmware |
| fallback. This file has no affect on firmware uploads. For |
| more information on timeouts please see the documentation |
| for firmware fallback. |
