blob: 0dca4b3d66e4278075675750932c7a3d9c49b400 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/msm/dpu-sdm845.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Display DPU dt properties for SDM845 target
maintainers:
- Krishna Manikandan <mkrishn@codeaurora.org>
description: |
Device tree bindings for MSM Mobile Display Subsystem(MDSS) that encapsulates
sub-blocks like DPU display controller, DSI and DP interfaces etc. Device tree
bindings of MDSS and DPU are mentioned for SDM845 target.
properties:
compatible:
items:
- const: qcom,sdm845-mdss
reg:
maxItems: 1
reg-names:
const: mdss
power-domains:
maxItems: 1
clocks:
items:
- description: Display AHB clock from gcc
- description: Display core clock
clock-names:
items:
- const: iface
- const: core
interrupts:
maxItems: 1
interrupt-controller: true
"#address-cells": true
"#size-cells": true
"#interrupt-cells":
const: 1
iommus:
items:
- description: Phandle to apps_smmu node with SID mask for Hard-Fail port0
- description: Phandle to apps_smmu node with SID mask for Hard-Fail port1
ranges: true
patternProperties:
"^display-controller@[0-9a-f]+$":
type: object
description: Node containing the properties of DPU.
properties:
compatible:
items:
- const: qcom,sdm845-dpu
reg:
items:
- description: Address offset and size for mdp register set
- description: Address offset and size for vbif register set
reg-names:
items:
- const: mdp
- const: vbif
clocks:
items:
- description: Display ahb clock
- description: Display axi clock
- description: Display core clock
- description: Display vsync clock
clock-names:
items:
- const: iface
- const: bus
- const: core
- const: vsync
interrupts:
maxItems: 1
power-domains:
maxItems: 1
operating-points-v2: true
ports:
$ref: /schemas/graph.yaml#/properties/ports
description: |
Contains the list of output ports from DPU device. These ports
connect to interfaces that are external to the DPU hardware,
such as DSI, DP etc. Each output port contains an endpoint that
describes how it is connected to an external interface.
properties:
port@0:
$ref: /schemas/graph.yaml#/properties/port
description: DPU_INTF1 (DSI1)
port@1:
$ref: /schemas/graph.yaml#/properties/port
description: DPU_INTF2 (DSI2)
required:
- port@0
- port@1
required:
- compatible
- reg
- reg-names
- clocks
- interrupts
- power-domains
- operating-points-v2
- ports
required:
- compatible
- reg
- reg-names
- power-domains
- clocks
- interrupts
- interrupt-controller
- iommus
- ranges
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/qcom,dispcc-sdm845.h>
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/qcom-rpmpd.h>
display-subsystem@ae00000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "qcom,sdm845-mdss";
reg = <0x0ae00000 0x1000>;
reg-names = "mdss";
power-domains = <&dispcc MDSS_GDSC>;
clocks = <&gcc GCC_DISP_AHB_CLK>,
<&dispcc DISP_CC_MDSS_MDP_CLK>;
clock-names = "iface", "core";
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <1>;
iommus = <&apps_smmu 0x880 0x8>,
<&apps_smmu 0xc80 0x8>;
ranges;
display-controller@ae01000 {
compatible = "qcom,sdm845-dpu";
reg = <0x0ae01000 0x8f000>,
<0x0aeb0000 0x2008>;
reg-names = "mdp", "vbif";
clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
<&dispcc DISP_CC_MDSS_AXI_CLK>,
<&dispcc DISP_CC_MDSS_MDP_CLK>,
<&dispcc DISP_CC_MDSS_VSYNC_CLK>;
clock-names = "iface", "bus", "core", "vsync";
interrupt-parent = <&mdss>;
interrupts = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&mdp_opp_table>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dpu_intf1_out: endpoint {
remote-endpoint = <&dsi0_in>;
};
};
port@1 {
reg = <1>;
dpu_intf2_out: endpoint {
remote-endpoint = <&dsi1_in>;
};
};
};
};
};
...