| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2017-2018 Overkiz SAS |
| * Author: Mickael Gardet <m.gardet@overkiz.com> |
| * Kévin Raymond <k.raymond@overkiz.com> |
| * Dorian Rocipon <d.rocipon@overkiz.com> |
| */ |
| /dts-v1/; |
| #include "at91-kizboxmini-common.dtsi" |
| |
| / { |
| model = "Overkiz SmartKiz"; |
| compatible = "overkiz,smartkiz", "atmel,at91sam9g25", |
| "atmel,at91sam9x5", "atmel,at91sam9"; |
| |
| clocks { |
| adc_op_clk { |
| status = "okay"; |
| }; |
| }; |
| |
| aliases { |
| serial5 = &uart0; |
| }; |
| |
| pio_keys { |
| hk_reset { |
| label = "HK_RESET"; |
| gpios = <&pioC 13 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| power_rf { |
| label = "POWER_RF"; |
| gpios = <&pioA 20 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| power_wifi { |
| label = "POWER_WIFI"; |
| gpios = <&pioA 21 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| }; |
| |
| &pinctrl { |
| i2c1 { |
| pinctrl_i2c1: i2c1-0 { |
| atmel,pins = |
| <AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_PULL_UP |
| AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_PULL_UP>; |
| }; |
| }; |
| |
| adc0 { |
| pinctrl_adc0_ad0: adc0_ad0-0 { |
| /* pull-up disable */ |
| atmel,pins = <AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; |
| }; |
| pinctrl_adc0_ad5: adc0_ad5-0 { |
| /* pull-up disable */ |
| atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; |
| }; |
| pinctrl_adc0_ad6: adc0_ad6-0 { |
| /* pull-up disable */ |
| atmel,pins = <AT91_PIOB 17 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; |
| }; |
| pinctrl_adc0_ad11: adc0_ad11-0 { |
| /* pull-up disable */ |
| atmel,pins = <AT91_PIOB 10 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; |
| }; |
| }; |
| }; |
| |
| &i2c1 { |
| dmas = <0>, <0>; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| status = "disabled"; |
| }; |
| |
| &macb0 { |
| status = "disabled"; |
| }; |
| |
| &rtc { |
| status = "okay"; |
| }; |
| |
| &led_blue { |
| status = "okay"; |
| }; |
| |
| &adc0 { |
| atmel,adc-vref = <2500>; |
| pinctrl-names = "default"; |
| pinctrl-0 = < |
| &pinctrl_adc0_ad0 |
| &pinctrl_adc0_ad5 |
| &pinctrl_adc0_ad6 |
| &pinctrl_adc0_ad11 |
| >; |
| atmel,adc-channels-used = <0x0861>; |
| status = "okay"; |
| }; |
| |
| &uart0 { |
| status = "okay"; |
| }; |
| |