| /* |
| * arch/arm64/kernel/ftrace.c |
| * |
| * Copyright (C) 2013 Linaro Limited |
| * Author: AKASHI Takahiro <takahiro.akashi@linaro.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/ftrace.h> |
| #include <linux/module.h> |
| #include <linux/swab.h> |
| #include <linux/uaccess.h> |
| |
| #include <asm/cacheflush.h> |
| #include <asm/debug-monitors.h> |
| #include <asm/ftrace.h> |
| #include <asm/insn.h> |
| |
| #ifdef CONFIG_DYNAMIC_FTRACE |
| /* |
| * Replace a single instruction, which may be a branch or NOP. |
| * If @validate == true, a replaced instruction is checked against 'old'. |
| */ |
| static int ftrace_modify_code(unsigned long pc, u32 old, u32 new, |
| bool validate) |
| { |
| u32 replaced; |
| |
| /* |
| * Note: |
| * We are paranoid about modifying text, as if a bug were to happen, it |
| * could cause us to read or write to someplace that could cause harm. |
| * Carefully read and modify the code with aarch64_insn_*() which uses |
| * probe_kernel_*(), and make sure what we read is what we expected it |
| * to be before modifying it. |
| */ |
| if (validate) { |
| if (aarch64_insn_read((void *)pc, &replaced)) |
| return -EFAULT; |
| |
| if (replaced != old) |
| return -EINVAL; |
| } |
| if (aarch64_insn_patch_text_nosync((void *)pc, new)) |
| return -EPERM; |
| |
| return 0; |
| } |
| |
| /* |
| * Replace tracer function in ftrace_caller() |
| */ |
| int ftrace_update_ftrace_func(ftrace_func_t func) |
| { |
| unsigned long pc; |
| u32 new; |
| |
| pc = (unsigned long)&ftrace_call; |
| new = aarch64_insn_gen_branch_imm(pc, (unsigned long)func, |
| AARCH64_INSN_BRANCH_LINK); |
| |
| return ftrace_modify_code(pc, 0, new, false); |
| } |
| |
| /* |
| * Turn on the call to ftrace_caller() in instrumented function |
| */ |
| int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) |
| { |
| unsigned long pc = rec->ip; |
| u32 old, new; |
| long offset = (long)pc - (long)addr; |
| |
| if (offset < -SZ_128M || offset >= SZ_128M) { |
| #ifdef CONFIG_ARM64_MODULE_PLTS |
| struct plt_entry trampoline; |
| struct module *mod; |
| |
| /* |
| * On kernels that support module PLTs, the offset between the |
| * branch instruction and its target may legally exceed the |
| * range of an ordinary relative 'bl' opcode. In this case, we |
| * need to branch via a trampoline in the module. |
| * |
| * NOTE: __module_text_address() must be called with preemption |
| * disabled, but we can rely on ftrace_lock to ensure that 'mod' |
| * retains its validity throughout the remainder of this code. |
| */ |
| preempt_disable(); |
| mod = __module_text_address(pc); |
| preempt_enable(); |
| |
| if (WARN_ON(!mod)) |
| return -EINVAL; |
| |
| /* |
| * There is only one ftrace trampoline per module. For now, |
| * this is not a problem since on arm64, all dynamic ftrace |
| * invocations are routed via ftrace_caller(). This will need |
| * to be revisited if support for multiple ftrace entry points |
| * is added in the future, but for now, the pr_err() below |
| * deals with a theoretical issue only. |
| */ |
| trampoline = get_plt_entry(addr); |
| if (!plt_entries_equal(mod->arch.ftrace_trampoline, |
| &trampoline)) { |
| if (!plt_entries_equal(mod->arch.ftrace_trampoline, |
| &(struct plt_entry){})) { |
| pr_err("ftrace: far branches to multiple entry points unsupported inside a single module\n"); |
| return -EINVAL; |
| } |
| |
| /* point the trampoline to our ftrace entry point */ |
| module_disable_ro(mod); |
| *mod->arch.ftrace_trampoline = trampoline; |
| module_enable_ro(mod, true); |
| |
| /* update trampoline before patching in the branch */ |
| smp_wmb(); |
| } |
| addr = (unsigned long)(void *)mod->arch.ftrace_trampoline; |
| #else /* CONFIG_ARM64_MODULE_PLTS */ |
| return -EINVAL; |
| #endif /* CONFIG_ARM64_MODULE_PLTS */ |
| } |
| |
| old = aarch64_insn_gen_nop(); |
| new = aarch64_insn_gen_branch_imm(pc, addr, AARCH64_INSN_BRANCH_LINK); |
| |
| return ftrace_modify_code(pc, old, new, true); |
| } |
| |
| /* |
| * Turn off the call to ftrace_caller() in instrumented function |
| */ |
| int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec, |
| unsigned long addr) |
| { |
| unsigned long pc = rec->ip; |
| bool validate = true; |
| u32 old = 0, new; |
| long offset = (long)pc - (long)addr; |
| |
| if (offset < -SZ_128M || offset >= SZ_128M) { |
| #ifdef CONFIG_ARM64_MODULE_PLTS |
| u32 replaced; |
| |
| /* |
| * 'mod' is only set at module load time, but if we end up |
| * dealing with an out-of-range condition, we can assume it |
| * is due to a module being loaded far away from the kernel. |
| */ |
| if (!mod) { |
| preempt_disable(); |
| mod = __module_text_address(pc); |
| preempt_enable(); |
| |
| if (WARN_ON(!mod)) |
| return -EINVAL; |
| } |
| |
| /* |
| * The instruction we are about to patch may be a branch and |
| * link instruction that was redirected via a PLT entry. In |
| * this case, the normal validation will fail, but we can at |
| * least check that we are dealing with a branch and link |
| * instruction that points into the right module. |
| */ |
| if (aarch64_insn_read((void *)pc, &replaced)) |
| return -EFAULT; |
| |
| if (!aarch64_insn_is_bl(replaced) || |
| !within_module(pc + aarch64_get_branch_offset(replaced), |
| mod)) |
| return -EINVAL; |
| |
| validate = false; |
| #else /* CONFIG_ARM64_MODULE_PLTS */ |
| return -EINVAL; |
| #endif /* CONFIG_ARM64_MODULE_PLTS */ |
| } else { |
| old = aarch64_insn_gen_branch_imm(pc, addr, |
| AARCH64_INSN_BRANCH_LINK); |
| } |
| |
| new = aarch64_insn_gen_nop(); |
| |
| return ftrace_modify_code(pc, old, new, validate); |
| } |
| |
| void arch_ftrace_update_code(int command) |
| { |
| ftrace_modify_all_code(command); |
| } |
| |
| int __init ftrace_dyn_arch_init(void) |
| { |
| return 0; |
| } |
| #endif /* CONFIG_DYNAMIC_FTRACE */ |
| |
| #ifdef CONFIG_FUNCTION_GRAPH_TRACER |
| /* |
| * function_graph tracer expects ftrace_return_to_handler() to be called |
| * on the way back to parent. For this purpose, this function is called |
| * in _mcount() or ftrace_caller() to replace return address (*parent) on |
| * the call stack to return_to_handler. |
| * |
| * Note that @frame_pointer is used only for sanity check later. |
| */ |
| void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr, |
| unsigned long frame_pointer) |
| { |
| unsigned long return_hooker = (unsigned long)&return_to_handler; |
| unsigned long old; |
| struct ftrace_graph_ent trace; |
| int err; |
| |
| if (unlikely(atomic_read(¤t->tracing_graph_pause))) |
| return; |
| |
| /* |
| * Note: |
| * No protection against faulting at *parent, which may be seen |
| * on other archs. It's unlikely on AArch64. |
| */ |
| old = *parent; |
| |
| trace.func = self_addr; |
| trace.depth = current->curr_ret_stack + 1; |
| |
| /* Only trace if the calling function expects to */ |
| if (!ftrace_graph_entry(&trace)) |
| return; |
| |
| err = ftrace_push_return_trace(old, self_addr, &trace.depth, |
| frame_pointer, NULL); |
| if (err == -EBUSY) |
| return; |
| else |
| *parent = return_hooker; |
| } |
| |
| #ifdef CONFIG_DYNAMIC_FTRACE |
| /* |
| * Turn on/off the call to ftrace_graph_caller() in ftrace_caller() |
| * depending on @enable. |
| */ |
| static int ftrace_modify_graph_caller(bool enable) |
| { |
| unsigned long pc = (unsigned long)&ftrace_graph_call; |
| u32 branch, nop; |
| |
| branch = aarch64_insn_gen_branch_imm(pc, |
| (unsigned long)ftrace_graph_caller, |
| AARCH64_INSN_BRANCH_NOLINK); |
| nop = aarch64_insn_gen_nop(); |
| |
| if (enable) |
| return ftrace_modify_code(pc, nop, branch, true); |
| else |
| return ftrace_modify_code(pc, branch, nop, true); |
| } |
| |
| int ftrace_enable_ftrace_graph_caller(void) |
| { |
| return ftrace_modify_graph_caller(true); |
| } |
| |
| int ftrace_disable_ftrace_graph_caller(void) |
| { |
| return ftrace_modify_graph_caller(false); |
| } |
| #endif /* CONFIG_DYNAMIC_FTRACE */ |
| #endif /* CONFIG_FUNCTION_GRAPH_TRACER */ |