| /* |
| * SAMSUNG EXYNOS5250 SoC device tree source |
| * |
| * Copyright (c) 2012 Samsung Electronics Co., Ltd. |
| * http://www.samsung.com |
| * |
| * SAMSUNG EXYNOS5250 SoC device nodes are listed in this file. |
| * EXYNOS5250 based board files can include this file and provide |
| * values for board specfic bindings. |
| * |
| * Note: This file does not include device nodes for all the controllers in |
| * EXYNOS5250 SoC. As device tree coverage for EXYNOS5250 increases, |
| * additional nodes can be added to this file. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <dt-bindings/clock/exynos5250.h> |
| #include "exynos5.dtsi" |
| #include "exynos4-cpu-thermal.dtsi" |
| #include <dt-bindings/clock/exynos-audss-clk.h> |
| |
| / { |
| compatible = "samsung,exynos5250", "samsung,exynos5"; |
| |
| aliases { |
| spi0 = &spi_0; |
| spi1 = &spi_1; |
| spi2 = &spi_2; |
| gsc0 = &gsc_0; |
| gsc1 = &gsc_1; |
| gsc2 = &gsc_2; |
| gsc3 = &gsc_3; |
| mshc0 = &mmc_0; |
| mshc1 = &mmc_1; |
| mshc2 = &mmc_2; |
| mshc3 = &mmc_3; |
| i2c4 = &i2c_4; |
| i2c5 = &i2c_5; |
| i2c6 = &i2c_6; |
| i2c7 = &i2c_7; |
| i2c8 = &i2c_8; |
| i2c9 = &i2c_9; |
| pinctrl0 = &pinctrl_0; |
| pinctrl1 = &pinctrl_1; |
| pinctrl2 = &pinctrl_2; |
| pinctrl3 = &pinctrl_3; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a15"; |
| reg = <0>; |
| clock-frequency = <1700000000>; |
| clocks = <&clock CLK_ARM_CLK>; |
| clock-names = "cpu"; |
| clock-latency = <140000>; |
| |
| operating-points = < |
| 1700000 1300000 |
| 1600000 1250000 |
| 1500000 1225000 |
| 1400000 1200000 |
| 1300000 1150000 |
| 1200000 1125000 |
| 1100000 1100000 |
| 1000000 1075000 |
| 900000 1050000 |
| 800000 1025000 |
| 700000 1012500 |
| 600000 1000000 |
| 500000 975000 |
| 400000 950000 |
| 300000 937500 |
| 200000 925000 |
| >; |
| cooling-min-level = <15>; |
| cooling-max-level = <9>; |
| #cooling-cells = <2>; /* min followed by max */ |
| }; |
| cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a15"; |
| reg = <1>; |
| clock-frequency = <1700000000>; |
| }; |
| }; |
| |
| soc: soc { |
| sysram@02020000 { |
| compatible = "mmio-sram"; |
| reg = <0x02020000 0x30000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x02020000 0x30000>; |
| |
| smp-sysram@0 { |
| compatible = "samsung,exynos4210-sysram"; |
| reg = <0x0 0x1000>; |
| }; |
| |
| smp-sysram@2f000 { |
| compatible = "samsung,exynos4210-sysram-ns"; |
| reg = <0x2f000 0x1000>; |
| }; |
| }; |
| |
| pd_gsc: gsc-power-domain@10044000 { |
| compatible = "samsung,exynos4210-pd"; |
| reg = <0x10044000 0x20>; |
| #power-domain-cells = <0>; |
| label = "GSC"; |
| }; |
| |
| pd_mfc: mfc-power-domain@10044040 { |
| compatible = "samsung,exynos4210-pd"; |
| reg = <0x10044040 0x20>; |
| #power-domain-cells = <0>; |
| label = "MFC"; |
| }; |
| |
| pd_disp1: disp1-power-domain@100440A0 { |
| compatible = "samsung,exynos4210-pd"; |
| reg = <0x100440A0 0x20>; |
| #power-domain-cells = <0>; |
| label = "DISP1"; |
| clocks = <&clock CLK_FIN_PLL>, |
| <&clock CLK_MOUT_ACLK200_DISP1_SUB>, |
| <&clock CLK_MOUT_ACLK300_DISP1_SUB>; |
| clock-names = "oscclk", "clk0", "clk1"; |
| }; |
| |
| clock: clock-controller@10010000 { |
| compatible = "samsung,exynos5250-clock"; |
| reg = <0x10010000 0x30000>; |
| #clock-cells = <1>; |
| }; |
| |
| clock_audss: audss-clock-controller@3810000 { |
| compatible = "samsung,exynos5250-audss-clock"; |
| reg = <0x03810000 0x0C>; |
| #clock-cells = <1>; |
| clocks = <&clock CLK_FIN_PLL>, <&clock CLK_FOUT_EPLL>, |
| <&clock CLK_SCLK_AUDIO0>, <&clock CLK_DIV_PCM0>; |
| clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in"; |
| }; |
| |
| timer { |
| compatible = "arm,armv7-timer"; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; |
| /* |
| * Unfortunately we need this since some versions |
| * of U-Boot on Exynos don't set the CNTFRQ register, |
| * so we need the value from DT. |
| */ |
| clock-frequency = <24000000>; |
| }; |
| |
| mct@101C0000 { |
| compatible = "samsung,exynos4210-mct"; |
| reg = <0x101C0000 0x800>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupt-parent = <&mct_map>; |
| interrupts = <0 0>, <1 0>, <2 0>, <3 0>, |
| <4 0>, <5 0>; |
| clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>; |
| clock-names = "fin_pll", "mct"; |
| |
| mct_map: mct-map { |
| #interrupt-cells = <2>; |
| #address-cells = <0>; |
| #size-cells = <0>; |
| interrupt-map = <0x0 0 &combiner 23 3>, |
| <0x1 0 &combiner 23 4>, |
| <0x2 0 &combiner 25 2>, |
| <0x3 0 &combiner 25 3>, |
| <0x4 0 &gic 0 120 IRQ_TYPE_LEVEL_HIGH>, |
| <0x5 0 &gic 0 121 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| pmu { |
| compatible = "arm,cortex-a15-pmu"; |
| interrupt-parent = <&combiner>; |
| interrupts = <1 2>, <22 4>; |
| }; |
| |
| pinctrl_0: pinctrl@11400000 { |
| compatible = "samsung,exynos5250-pinctrl"; |
| reg = <0x11400000 0x1000>; |
| interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; |
| |
| wakup_eint: wakeup-interrupt-controller { |
| compatible = "samsung,exynos4210-wakeup-eint"; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| pinctrl_1: pinctrl@13400000 { |
| compatible = "samsung,exynos5250-pinctrl"; |
| reg = <0x13400000 0x1000>; |
| interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pinctrl_2: pinctrl@10d10000 { |
| compatible = "samsung,exynos5250-pinctrl"; |
| reg = <0x10d10000 0x1000>; |
| interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pinctrl_3: pinctrl@03860000 { |
| compatible = "samsung,exynos5250-pinctrl"; |
| reg = <0x03860000 0x1000>; |
| interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pmu_system_controller: system-controller@10040000 { |
| compatible = "samsung,exynos5250-pmu", "syscon"; |
| reg = <0x10040000 0x5000>; |
| clock-names = "clkout16"; |
| clocks = <&clock CLK_FIN_PLL>; |
| #clock-cells = <1>; |
| interrupt-controller; |
| #interrupt-cells = <3>; |
| interrupt-parent = <&gic>; |
| }; |
| |
| watchdog@101D0000 { |
| compatible = "samsung,exynos5250-wdt"; |
| reg = <0x101D0000 0x100>; |
| interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_WDT>; |
| clock-names = "watchdog"; |
| samsung,syscon-phandle = <&pmu_system_controller>; |
| }; |
| |
| g2d@10850000 { |
| compatible = "samsung,exynos5250-g2d"; |
| reg = <0x10850000 0x1000>; |
| interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_G2D>; |
| clock-names = "fimg2d"; |
| iommus = <&sysmmu_g2d>; |
| }; |
| |
| mfc: codec@11000000 { |
| compatible = "samsung,mfc-v6"; |
| reg = <0x11000000 0x10000>; |
| interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&pd_mfc>; |
| clocks = <&clock CLK_MFC>; |
| clock-names = "mfc"; |
| iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>; |
| iommu-names = "left", "right"; |
| }; |
| |
| rotator: rotator@11C00000 { |
| compatible = "samsung,exynos5250-rotator"; |
| reg = <0x11C00000 0x64>; |
| interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_ROTATOR>; |
| clock-names = "rotator"; |
| iommus = <&sysmmu_rotator>; |
| }; |
| |
| tmu: tmu@10060000 { |
| compatible = "samsung,exynos5250-tmu"; |
| reg = <0x10060000 0x100>; |
| interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_TMU>; |
| clock-names = "tmu_apbif"; |
| #include "exynos4412-tmu-sensor-conf.dtsi" |
| }; |
| |
| sata: sata@122F0000 { |
| compatible = "snps,dwc-ahci"; |
| samsung,sata-freq = <66>; |
| reg = <0x122F0000 0x1ff>; |
| interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>; |
| clock-names = "sata", "sclk_sata"; |
| phys = <&sata_phy>; |
| phy-names = "sata-phy"; |
| status = "disabled"; |
| }; |
| |
| sata_phy: sata-phy@12170000 { |
| compatible = "samsung,exynos5250-sata-phy"; |
| reg = <0x12170000 0x1ff>; |
| clocks = <&clock CLK_SATA_PHYCTRL>; |
| clock-names = "sata_phyctrl"; |
| #phy-cells = <0>; |
| samsung,syscon-phandle = <&pmu_system_controller>; |
| status = "disabled"; |
| }; |
| |
| /* i2c_0-3 are defined in exynos5.dtsi */ |
| i2c_4: i2c@12CA0000 { |
| compatible = "samsung,s3c2440-i2c"; |
| reg = <0x12CA0000 0x100>; |
| interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&clock CLK_I2C4>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c4_bus>; |
| status = "disabled"; |
| }; |
| |
| i2c_5: i2c@12CB0000 { |
| compatible = "samsung,s3c2440-i2c"; |
| reg = <0x12CB0000 0x100>; |
| interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&clock CLK_I2C5>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c5_bus>; |
| status = "disabled"; |
| }; |
| |
| i2c_6: i2c@12CC0000 { |
| compatible = "samsung,s3c2440-i2c"; |
| reg = <0x12CC0000 0x100>; |
| interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&clock CLK_I2C6>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c6_bus>; |
| status = "disabled"; |
| }; |
| |
| i2c_7: i2c@12CD0000 { |
| compatible = "samsung,s3c2440-i2c"; |
| reg = <0x12CD0000 0x100>; |
| interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&clock CLK_I2C7>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c7_bus>; |
| status = "disabled"; |
| }; |
| |
| i2c_8: i2c@12CE0000 { |
| compatible = "samsung,s3c2440-hdmiphy-i2c"; |
| reg = <0x12CE0000 0x1000>; |
| interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&clock CLK_I2C_HDMI>; |
| clock-names = "i2c"; |
| status = "disabled"; |
| }; |
| |
| i2c_9: i2c@121D0000 { |
| compatible = "samsung,exynos5-sata-phy-i2c"; |
| reg = <0x121D0000 0x100>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&clock CLK_SATA_PHYI2C>; |
| clock-names = "i2c"; |
| status = "disabled"; |
| }; |
| |
| spi_0: spi@12d20000 { |
| compatible = "samsung,exynos4210-spi"; |
| status = "disabled"; |
| reg = <0x12d20000 0x100>; |
| interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&pdma0 5 |
| &pdma0 4>; |
| dma-names = "tx", "rx"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>; |
| clock-names = "spi", "spi_busclk0"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi0_bus>; |
| }; |
| |
| spi_1: spi@12d30000 { |
| compatible = "samsung,exynos4210-spi"; |
| status = "disabled"; |
| reg = <0x12d30000 0x100>; |
| interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&pdma1 5 |
| &pdma1 4>; |
| dma-names = "tx", "rx"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>; |
| clock-names = "spi", "spi_busclk0"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi1_bus>; |
| }; |
| |
| spi_2: spi@12d40000 { |
| compatible = "samsung,exynos4210-spi"; |
| status = "disabled"; |
| reg = <0x12d40000 0x100>; |
| interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; |
| dmas = <&pdma0 7 |
| &pdma0 6>; |
| dma-names = "tx", "rx"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>; |
| clock-names = "spi", "spi_busclk0"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi2_bus>; |
| }; |
| |
| mmc_0: mmc@12200000 { |
| compatible = "samsung,exynos5250-dw-mshc"; |
| interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x12200000 0x1000>; |
| clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>; |
| clock-names = "biu", "ciu"; |
| fifo-depth = <0x80>; |
| status = "disabled"; |
| }; |
| |
| mmc_1: mmc@12210000 { |
| compatible = "samsung,exynos5250-dw-mshc"; |
| interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x12210000 0x1000>; |
| clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>; |
| clock-names = "biu", "ciu"; |
| fifo-depth = <0x80>; |
| status = "disabled"; |
| }; |
| |
| mmc_2: mmc@12220000 { |
| compatible = "samsung,exynos5250-dw-mshc"; |
| interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x12220000 0x1000>; |
| clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>; |
| clock-names = "biu", "ciu"; |
| fifo-depth = <0x80>; |
| status = "disabled"; |
| }; |
| |
| mmc_3: mmc@12230000 { |
| compatible = "samsung,exynos5250-dw-mshc"; |
| reg = <0x12230000 0x1000>; |
| interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>; |
| clock-names = "biu", "ciu"; |
| fifo-depth = <0x80>; |
| status = "disabled"; |
| }; |
| |
| i2s0: i2s@03830000 { |
| compatible = "samsung,s5pv210-i2s"; |
| status = "disabled"; |
| reg = <0x03830000 0x100>; |
| dmas = <&pdma0 10 |
| &pdma0 9 |
| &pdma0 8>; |
| dma-names = "tx", "rx", "tx-sec"; |
| clocks = <&clock_audss EXYNOS_I2S_BUS>, |
| <&clock_audss EXYNOS_I2S_BUS>, |
| <&clock_audss EXYNOS_SCLK_I2S>; |
| clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; |
| samsung,idma-addr = <0x03000000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2s0_bus>; |
| }; |
| |
| i2s1: i2s@12D60000 { |
| compatible = "samsung,s3c6410-i2s"; |
| status = "disabled"; |
| reg = <0x12D60000 0x100>; |
| dmas = <&pdma1 12 |
| &pdma1 11>; |
| dma-names = "tx", "rx"; |
| clocks = <&clock CLK_I2S1>, <&clock CLK_DIV_I2S1>; |
| clock-names = "iis", "i2s_opclk0"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2s1_bus>; |
| }; |
| |
| i2s2: i2s@12D70000 { |
| compatible = "samsung,s3c6410-i2s"; |
| status = "disabled"; |
| reg = <0x12D70000 0x100>; |
| dmas = <&pdma0 12 |
| &pdma0 11>; |
| dma-names = "tx", "rx"; |
| clocks = <&clock CLK_I2S2>, <&clock CLK_DIV_I2S2>; |
| clock-names = "iis", "i2s_opclk0"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2s2_bus>; |
| }; |
| |
| usb_dwc3 { |
| compatible = "samsung,exynos5250-dwusb3"; |
| clocks = <&clock CLK_USB3>; |
| clock-names = "usbdrd30"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| usbdrd_dwc3: dwc3@12000000 { |
| compatible = "synopsys,dwc3"; |
| reg = <0x12000000 0x10000>; |
| interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; |
| phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>; |
| phy-names = "usb2-phy", "usb3-phy"; |
| }; |
| }; |
| |
| usbdrd_phy: phy@12100000 { |
| compatible = "samsung,exynos5250-usbdrd-phy"; |
| reg = <0x12100000 0x100>; |
| clocks = <&clock CLK_USB3>, <&clock CLK_FIN_PLL>; |
| clock-names = "phy", "ref"; |
| samsung,pmu-syscon = <&pmu_system_controller>; |
| #phy-cells = <1>; |
| }; |
| |
| ehci: usb@12110000 { |
| compatible = "samsung,exynos4210-ehci"; |
| reg = <0x12110000 0x100>; |
| interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&clock CLK_USB2>; |
| clock-names = "usbhost"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| port@0 { |
| reg = <0>; |
| phys = <&usb2_phy_gen 1>; |
| }; |
| }; |
| |
| ohci: usb@12120000 { |
| compatible = "samsung,exynos4210-ohci"; |
| reg = <0x12120000 0x100>; |
| interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&clock CLK_USB2>; |
| clock-names = "usbhost"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| port@0 { |
| reg = <0>; |
| phys = <&usb2_phy_gen 1>; |
| }; |
| }; |
| |
| usb2_phy_gen: phy@12130000 { |
| compatible = "samsung,exynos5250-usb2-phy"; |
| reg = <0x12130000 0x100>; |
| clocks = <&clock CLK_USB2>, <&clock CLK_FIN_PLL>; |
| clock-names = "phy", "ref"; |
| #phy-cells = <1>; |
| samsung,sysreg-phandle = <&sysreg_system_controller>; |
| samsung,pmureg-phandle = <&pmu_system_controller>; |
| }; |
| |
| amba { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| interrupt-parent = <&gic>; |
| ranges; |
| |
| pdma0: pdma@121A0000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x121A0000 0x1000>; |
| interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_PDMA0>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| #dma-channels = <8>; |
| #dma-requests = <32>; |
| }; |
| |
| pdma1: pdma@121B0000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x121B0000 0x1000>; |
| interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_PDMA1>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| #dma-channels = <8>; |
| #dma-requests = <32>; |
| }; |
| |
| mdma0: mdma@10800000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x10800000 0x1000>; |
| interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_MDMA0>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| #dma-channels = <8>; |
| #dma-requests = <1>; |
| }; |
| |
| mdma1: mdma@11C10000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x11C10000 0x1000>; |
| interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_MDMA1>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| #dma-channels = <8>; |
| #dma-requests = <1>; |
| }; |
| }; |
| |
| gsc_0: gsc@13e00000 { |
| compatible = "samsung,exynos5-gsc"; |
| reg = <0x13e00000 0x1000>; |
| interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&pd_gsc>; |
| clocks = <&clock CLK_GSCL0>; |
| clock-names = "gscl"; |
| iommu = <&sysmmu_gsc0>; |
| }; |
| |
| gsc_1: gsc@13e10000 { |
| compatible = "samsung,exynos5-gsc"; |
| reg = <0x13e10000 0x1000>; |
| interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&pd_gsc>; |
| clocks = <&clock CLK_GSCL1>; |
| clock-names = "gscl"; |
| iommu = <&sysmmu_gsc1>; |
| }; |
| |
| gsc_2: gsc@13e20000 { |
| compatible = "samsung,exynos5-gsc"; |
| reg = <0x13e20000 0x1000>; |
| interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&pd_gsc>; |
| clocks = <&clock CLK_GSCL2>; |
| clock-names = "gscl"; |
| iommu = <&sysmmu_gsc2>; |
| }; |
| |
| gsc_3: gsc@13e30000 { |
| compatible = "samsung,exynos5-gsc"; |
| reg = <0x13e30000 0x1000>; |
| interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; |
| power-domains = <&pd_gsc>; |
| clocks = <&clock CLK_GSCL3>; |
| clock-names = "gscl"; |
| iommu = <&sysmmu_gsc3>; |
| }; |
| |
| hdmi: hdmi@14530000 { |
| compatible = "samsung,exynos4212-hdmi"; |
| reg = <0x14530000 0x70000>; |
| power-domains = <&pd_disp1>; |
| interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>, |
| <&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>, |
| <&clock CLK_MOUT_HDMI>; |
| clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", |
| "sclk_hdmiphy", "mout_hdmi"; |
| samsung,syscon-phandle = <&pmu_system_controller>; |
| }; |
| |
| hdmicec: cec@101B0000 { |
| compatible = "samsung,s5p-cec"; |
| reg = <0x101B0000 0x200>; |
| interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_HDMI_CEC>; |
| clock-names = "hdmicec"; |
| samsung,syscon-phandle = <&pmu_system_controller>; |
| hdmi-phandle = <&hdmi>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hdmi_cec>; |
| status = "disabled"; |
| }; |
| |
| mixer@14450000 { |
| compatible = "samsung,exynos5250-mixer"; |
| reg = <0x14450000 0x10000>; |
| power-domains = <&pd_disp1>; |
| interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>, |
| <&clock CLK_SCLK_HDMI>; |
| clock-names = "mixer", "hdmi", "sclk_hdmi"; |
| iommus = <&sysmmu_tv>; |
| }; |
| |
| dp_phy: video-phy { |
| compatible = "samsung,exynos5250-dp-video-phy"; |
| samsung,pmu-syscon = <&pmu_system_controller>; |
| #phy-cells = <0>; |
| }; |
| |
| adc: adc@12D10000 { |
| compatible = "samsung,exynos-adc-v1"; |
| reg = <0x12D10000 0x100>; |
| interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_ADC>; |
| clock-names = "adc"; |
| #io-channel-cells = <1>; |
| io-channel-ranges; |
| samsung,syscon-phandle = <&pmu_system_controller>; |
| status = "disabled"; |
| }; |
| |
| sss@10830000 { |
| compatible = "samsung,exynos4210-secss"; |
| reg = <0x10830000 0x300>; |
| interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock CLK_SSS>; |
| clock-names = "secss"; |
| }; |
| |
| sysmmu_g2d: sysmmu@10A60000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x10A60000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <24 5>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_2D>, <&clock CLK_G2D>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_mfc_r: sysmmu@11200000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x11200000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <6 2>; |
| power-domains = <&pd_mfc>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_mfc_l: sysmmu@11210000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x11210000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <8 5>; |
| power-domains = <&pd_mfc>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_rotator: sysmmu@11D40000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x11D40000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <4 0>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_jpeg: sysmmu@11F20000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x11F20000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <4 2>; |
| power-domains = <&pd_gsc>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_fimc_isp: sysmmu@13260000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x13260000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <10 6>; |
| clock-names = "sysmmu"; |
| clocks = <&clock CLK_SMMU_FIMC_ISP>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_fimc_drc: sysmmu@13270000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x13270000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <11 6>; |
| clock-names = "sysmmu"; |
| clocks = <&clock CLK_SMMU_FIMC_DRC>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_fimc_fd: sysmmu@132A0000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x132A0000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <5 0>; |
| clock-names = "sysmmu"; |
| clocks = <&clock CLK_SMMU_FIMC_FD>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_fimc_scc: sysmmu@13280000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x13280000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <5 2>; |
| clock-names = "sysmmu"; |
| clocks = <&clock CLK_SMMU_FIMC_SCC>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_fimc_scp: sysmmu@13290000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x13290000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <3 6>; |
| clock-names = "sysmmu"; |
| clocks = <&clock CLK_SMMU_FIMC_SCP>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_fimc_mcuctl: sysmmu@132B0000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x132B0000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <5 4>; |
| clock-names = "sysmmu"; |
| clocks = <&clock CLK_SMMU_FIMC_MCU>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_fimc_odc: sysmmu@132C0000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x132C0000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <11 0>; |
| clock-names = "sysmmu"; |
| clocks = <&clock CLK_SMMU_FIMC_ODC>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_fimc_dis0: sysmmu@132D0000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x132D0000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <10 4>; |
| clock-names = "sysmmu"; |
| clocks = <&clock CLK_SMMU_FIMC_DIS0>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_fimc_dis1: sysmmu@132E0000{ |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x132E0000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <9 4>; |
| clock-names = "sysmmu"; |
| clocks = <&clock CLK_SMMU_FIMC_DIS1>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_fimc_3dnr: sysmmu@132F0000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x132F0000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <5 6>; |
| clock-names = "sysmmu"; |
| clocks = <&clock CLK_SMMU_FIMC_3DNR>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_fimc_lite0: sysmmu@13C40000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x13C40000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <3 4>; |
| power-domains = <&pd_gsc>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_FIMC_LITE0>, <&clock CLK_CAMIF_TOP>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_fimc_lite1: sysmmu@13C50000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x13C50000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <24 1>; |
| power-domains = <&pd_gsc>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_FIMC_LITE1>, <&clock CLK_CAMIF_TOP>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_gsc0: sysmmu@13E80000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x13E80000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <2 0>; |
| power-domains = <&pd_gsc>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_gsc1: sysmmu@13E90000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x13E90000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <2 2>; |
| power-domains = <&pd_gsc>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_gsc2: sysmmu@13EA0000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x13EA0000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <2 4>; |
| power-domains = <&pd_gsc>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_GSCL2>, <&clock CLK_GSCL2>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_gsc3: sysmmu@13EB0000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x13EB0000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <2 6>; |
| power-domains = <&pd_gsc>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_GSCL3>, <&clock CLK_GSCL3>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_fimd1: sysmmu@14640000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x14640000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <3 2>; |
| power-domains = <&pd_disp1>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_FIMD1>, <&clock CLK_FIMD1>; |
| #iommu-cells = <0>; |
| }; |
| |
| sysmmu_tv: sysmmu@14650000 { |
| compatible = "samsung,exynos-sysmmu"; |
| reg = <0x14650000 0x1000>; |
| interrupt-parent = <&combiner>; |
| interrupts = <7 4>; |
| power-domains = <&pd_disp1>; |
| clock-names = "sysmmu", "master"; |
| clocks = <&clock CLK_SMMU_TV>, <&clock CLK_MIXER>; |
| #iommu-cells = <0>; |
| }; |
| }; |
| |
| thermal-zones { |
| cpu_thermal: cpu-thermal { |
| polling-delay-passive = <0>; |
| polling-delay = <0>; |
| thermal-sensors = <&tmu 0>; |
| |
| cooling-maps { |
| map0 { |
| /* Corresponds to 800MHz at freq_table */ |
| cooling-device = <&cpu0 9 9>; |
| }; |
| map1 { |
| /* Corresponds to 200MHz at freq_table */ |
| cooling-device = <&cpu0 15 15>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| &dp { |
| power-domains = <&pd_disp1>; |
| clocks = <&clock CLK_DP>; |
| clock-names = "dp"; |
| phys = <&dp_phy>; |
| phy-names = "dp"; |
| }; |
| |
| &fimd { |
| power-domains = <&pd_disp1>; |
| clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>; |
| clock-names = "sclk_fimd", "fimd"; |
| iommus = <&sysmmu_fimd1>; |
| }; |
| |
| &i2c_0 { |
| clocks = <&clock CLK_I2C0>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c0_bus>; |
| }; |
| |
| &i2c_1 { |
| clocks = <&clock CLK_I2C1>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c1_bus>; |
| }; |
| |
| &i2c_2 { |
| clocks = <&clock CLK_I2C2>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c2_bus>; |
| }; |
| |
| &i2c_3 { |
| clocks = <&clock CLK_I2C3>; |
| clock-names = "i2c"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c3_bus>; |
| }; |
| |
| &pwm { |
| clocks = <&clock CLK_PWM>; |
| clock-names = "timers"; |
| }; |
| |
| &rtc { |
| clocks = <&clock CLK_RTC>; |
| clock-names = "rtc"; |
| interrupt-parent = <&pmu_system_controller>; |
| status = "disabled"; |
| }; |
| |
| &serial_0 { |
| clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; |
| clock-names = "uart", "clk_uart_baud0"; |
| dmas = <&pdma0 13>, <&pdma0 14>; |
| dma-names = "rx", "tx"; |
| }; |
| |
| &serial_1 { |
| clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; |
| clock-names = "uart", "clk_uart_baud0"; |
| dmas = <&pdma1 15>, <&pdma1 16>; |
| dma-names = "rx", "tx"; |
| }; |
| |
| &serial_2 { |
| clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; |
| clock-names = "uart", "clk_uart_baud0"; |
| dmas = <&pdma0 15>, <&pdma0 16>; |
| dma-names = "rx", "tx"; |
| }; |
| |
| &serial_3 { |
| clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; |
| clock-names = "uart", "clk_uart_baud0"; |
| dmas = <&pdma1 17>, <&pdma1 18>; |
| dma-names = "rx", "tx"; |
| }; |
| |
| #include "exynos5250-pinctrl.dtsi" |
