| /* |
| * Copyright 2016 Boundary Devices, Inc. |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This file is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This file is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| /dts-v1/; |
| |
| #include "imx7d.dtsi" |
| |
| / { |
| model = "Boundary Devices i.MX7 Nitrogen7 Board"; |
| compatible = "boundary,imx7d-nitrogen7", "fsl,imx7d"; |
| |
| aliases { |
| fb_lcd = &lcdif; |
| t_lcd = &t_lcd; |
| }; |
| |
| memory { |
| reg = <0x80000000 0x40000000>; |
| }; |
| |
| backlight-j9 { |
| compatible = "gpio-backlight"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_backlight_j9>; |
| gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; |
| default-on; |
| }; |
| |
| backlight-j20 { |
| compatible = "pwm-backlight"; |
| pwms = <&pwm1 0 5000000 0>; |
| brightness-levels = <0 4 8 16 32 64 128 255>; |
| default-brightness-level = <6>; |
| status = "okay"; |
| }; |
| |
| reg_usb_otg1_vbus: regulator-usb-otg1-vbus { |
| compatible = "regulator-fixed"; |
| regulator-name = "usb_otg1_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_usb_otg2_vbus: regulator-usb-otg2-vbus { |
| compatible = "regulator-fixed"; |
| regulator-name = "usb_otg2_vbus"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| gpio = <&gpio4 7 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| |
| reg_can2_3v3: regulator-can2-3v3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "can2-3v3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| gpio = <&gpio2 14 GPIO_ACTIVE_LOW>; |
| }; |
| |
| reg_vref_1v8: regulator-vref-1v8 { |
| compatible = "regulator-fixed"; |
| regulator-name = "vref-1v8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| reg_vref_3v3: regulator-vref-3v3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "vref-3v3"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| reg_wlan: regulator-wlan { |
| compatible = "regulator-fixed"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| clocks = <&clks IMX7D_CLKO2_ROOT_DIV>; |
| clock-names = "slow"; |
| regulator-name = "reg_wlan"; |
| startup-delay-us = <70000>; |
| gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| }; |
| }; |
| |
| &adc1 { |
| vref-supply = <®_vref_1v8>; |
| status = "okay"; |
| }; |
| |
| &adc2 { |
| vref-supply = <®_vref_1v8>; |
| status = "okay"; |
| }; |
| |
| &clks { |
| assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>, |
| <&clks IMX7D_CLKO2_ROOT_DIV>; |
| assigned-clock-parents = <&clks IMX7D_CKIL>; |
| assigned-clock-rates = <0>, <32768>; |
| }; |
| |
| &cpu0 { |
| arm-supply = <&sw1a_reg>; |
| }; |
| |
| &fec1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_enet1>; |
| assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, |
| <&clks IMX7D_ENET1_TIME_ROOT_CLK>; |
| assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; |
| assigned-clock-rates = <0>, <100000000>; |
| phy-mode = "rgmii"; |
| phy-handle = <ðphy0>; |
| fsl,magic-packet; |
| status = "okay"; |
| |
| mdio { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ethphy0: ethernet-phy@4 { |
| reg = <4>; |
| }; |
| }; |
| }; |
| |
| &flexcan2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan2>; |
| xceiver-supply = <®_can2_3v3>; |
| status = "okay"; |
| }; |
| |
| &i2c1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| status = "okay"; |
| |
| pmic: pfuze3000@08 { |
| compatible = "fsl,pfuze3000"; |
| reg = <0x08>; |
| |
| regulators { |
| sw1a_reg: sw1a { |
| regulator-min-microvolt = <700000>; |
| regulator-max-microvolt = <1475000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <6250>; |
| }; |
| |
| /* use sw1c_reg to align with pfuze100/pfuze200 */ |
| sw1c_reg: sw1b { |
| regulator-min-microvolt = <700000>; |
| regulator-max-microvolt = <1475000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <6250>; |
| }; |
| |
| sw2_reg: sw2 { |
| regulator-min-microvolt = <1500000>; |
| regulator-max-microvolt = <1850000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| sw3a_reg: sw3 { |
| regulator-min-microvolt = <900000>; |
| regulator-max-microvolt = <1650000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| swbst_reg: swbst { |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5150000>; |
| }; |
| |
| snvs_reg: vsnvs { |
| regulator-min-microvolt = <1000000>; |
| regulator-max-microvolt = <3000000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vref_reg: vrefddr { |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| vgen1_reg: vldo1 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vgen2_reg: vldo2 { |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1550000>; |
| regulator-always-on; |
| }; |
| |
| vgen3_reg: vccsd { |
| regulator-min-microvolt = <2850000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vgen4_reg: v33 { |
| regulator-min-microvolt = <2850000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vgen5_reg: vldo3 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| |
| vgen6_reg: vldo4 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c2>; |
| status = "okay"; |
| |
| rtc@68 { |
| compatible = "microcrystal,rv4162"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c2_rv4162>; |
| reg = <0x68>; |
| interrupts-extended = <&gpio2 15 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| }; |
| |
| &i2c3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c3>; |
| status = "okay"; |
| |
| touch@48 { |
| compatible = "ti,tsc2004"; |
| reg = <0x48>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c3_tsc2004>; |
| interrupts-extended = <&gpio3 4 IRQ_TYPE_EDGE_FALLING>; |
| wakeup-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| |
| &i2c4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c4>; |
| status = "okay"; |
| |
| codec: wm8960@1a { |
| compatible = "wlf,wm8960"; |
| reg = <0x1a>; |
| clocks = <&clks IMX7D_AUDIO_MCLK_ROOT_CLK>; |
| clock-names = "mclk"; |
| wlf,shared-lrclk; |
| }; |
| }; |
| |
| &lcdif { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_lcdif_dat |
| &pinctrl_lcdif_ctrl>; |
| lcd-supply = <®_vref_3v3>; |
| display = <&display0>; |
| status = "okay"; |
| |
| display0: lcd-display { |
| bits-per-pixel = <16>; |
| bus-width = <18>; |
| |
| display-timings { |
| native-mode = <&t_lcd>; |
| t_lcd: t_lcd_default { |
| /* default to Okaya display */ |
| clock-frequency = <30000000>; |
| hactive = <800>; |
| vactive = <480>; |
| hfront-porch = <40>; |
| hback-porch = <40>; |
| hsync-len = <48>; |
| vback-porch = <29>; |
| vfront-porch = <13>; |
| vsync-len = <3>; |
| hsync-active = <0>; |
| vsync-active = <0>; |
| de-active = <1>; |
| pixelclk-active = <0>; |
| }; |
| }; |
| }; |
| }; |
| |
| &pwm1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm1>; |
| status = "okay"; |
| }; |
| |
| &pwm2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pwm2>; |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>; |
| assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; |
| status = "okay"; |
| }; |
| |
| &uart2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart2>; |
| assigned-clocks = <&clks IMX7D_UART2_ROOT_SRC>; |
| assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; |
| status = "okay"; |
| }; |
| |
| &uart3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart3>; |
| assigned-clocks = <&clks IMX7D_UART3_ROOT_SRC>; |
| assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>; |
| status = "okay"; |
| }; |
| |
| &uart6 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart6>; |
| assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>; |
| assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; |
| uart-has-rtscts; |
| status = "okay"; |
| }; |
| |
| &usbotg1 { |
| vbus-supply = <®_usb_otg1_vbus>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbotg1>; |
| status = "okay"; |
| }; |
| |
| &usbotg2 { |
| vbus-supply = <®_usb_otg2_vbus>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usbotg2>; |
| dr_mode = "host"; |
| status = "okay"; |
| }; |
| |
| &usdhc1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc1>; |
| cd-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; |
| vmmc-supply = <&vgen3_reg>; |
| bus-width = <4>; |
| fsl,tuning-step = <2>; |
| wakeup-source; |
| keep-power-in-suspend; |
| status = "okay"; |
| }; |
| |
| &usdhc2 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc2>; |
| bus-width = <4>; |
| non-removable; |
| vmmc-supply = <®_wlan>; |
| cap-power-off-card; |
| keep-power-in-suspend; |
| status = "okay"; |
| |
| wlcore: wlcore@2 { |
| compatible = "ti,wl1271"; |
| reg = <2>; |
| interrupt-parent = <&gpio4>; |
| interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; |
| ref-clock-frequency = <38400000>; |
| }; |
| }; |
| |
| &usdhc3 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usdhc3>; |
| assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; |
| assigned-clock-rates = <400000000>; |
| bus-width = <8>; |
| fsl,tuning-step = <2>; |
| non-removable; |
| status = "okay"; |
| }; |
| |
| &wdog1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_wdog1>; |
| status = "okay"; |
| }; |
| |
| &iomuxc { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hog_1 &pinctrl_j2>; |
| |
| pinctrl_hog_1: hoggrp-1 { |
| fsl,pins = < |
| MX7D_PAD_SD3_RESET_B__GPIO6_IO11 0x5d |
| MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x7d |
| MX7D_PAD_ECSPI2_MISO__GPIO4_IO22 0x7d |
| >; |
| }; |
| |
| pinctrl_enet1: enet1grp { |
| fsl,pins = < |
| MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x3 |
| MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x3 |
| MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 0x3 |
| MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x71 |
| MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x71 |
| MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x71 |
| MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x71 |
| MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x71 |
| MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x71 |
| MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x71 |
| MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x11 |
| MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x11 |
| MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x11 |
| MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x71 |
| MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x11 |
| MX7D_PAD_SD3_STROBE__GPIO6_IO10 0x75 |
| >; |
| }; |
| |
| pinctrl_flexcan2: flexcan2grp { |
| fsl,pins = < |
| MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x7d |
| MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x7d |
| MX7D_PAD_EPDC_DATA14__GPIO2_IO14 0x7d |
| >; |
| }; |
| |
| pinctrl_i2c1: i2c1grp { |
| fsl,pins = < |
| MX7D_PAD_I2C1_SDA__I2C1_SDA 0x4000007f |
| MX7D_PAD_I2C1_SCL__I2C1_SCL 0x4000007f |
| >; |
| }; |
| |
| pinctrl_i2c2: i2c2grp { |
| fsl,pins = < |
| MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f |
| MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f |
| >; |
| }; |
| |
| pinctrl_i2c2_rv4162: i2c2-rv4162grp { |
| fsl,pins = < |
| MX7D_PAD_EPDC_DATA15__GPIO2_IO15 0x7d |
| >; |
| }; |
| |
| pinctrl_i2c3: i2c3grp { |
| fsl,pins = < |
| MX7D_PAD_I2C3_SDA__I2C3_SDA 0x4000007f |
| MX7D_PAD_I2C3_SCL__I2C3_SCL 0x4000007f |
| >; |
| }; |
| |
| pinctrl_i2c3_tsc2004: i2c3tsc2004grp { |
| fsl,pins = < |
| MX7D_PAD_LCD_RESET__GPIO3_IO4 0x79 |
| MX7D_PAD_SD2_WP__GPIO5_IO10 0x7d |
| >; |
| }; |
| |
| pinctrl_i2c4: i2c4grp { |
| fsl,pins = < |
| MX7D_PAD_I2C4_SDA__I2C4_SDA 0x4000007f |
| MX7D_PAD_I2C4_SCL__I2C4_SCL 0x4000007f |
| >; |
| }; |
| |
| pinctrl_j2: j2grp { |
| fsl,pins = < |
| MX7D_PAD_SAI1_TX_DATA__GPIO6_IO15 0x7d |
| MX7D_PAD_EPDC_BDR0__GPIO2_IO28 0x7d |
| MX7D_PAD_SAI1_RX_DATA__GPIO6_IO12 0x7d |
| MX7D_PAD_EPDC_BDR1__GPIO2_IO29 0x7d |
| MX7D_PAD_SD1_WP__GPIO5_IO1 0x7d |
| MX7D_PAD_EPDC_SDSHR__GPIO2_IO19 0x7d |
| MX7D_PAD_SD1_RESET_B__GPIO5_IO2 0x7d |
| MX7D_PAD_SD2_RESET_B__GPIO5_IO11 0x7d |
| MX7D_PAD_EPDC_DATA07__GPIO2_IO7 0x7d |
| MX7D_PAD_EPDC_DATA08__GPIO2_IO8 0x7d |
| MX7D_PAD_EPDC_DATA09__GPIO2_IO9 0x7d |
| MX7D_PAD_EPDC_DATA10__GPIO2_IO10 0x7d |
| MX7D_PAD_EPDC_DATA11__GPIO2_IO11 0x7d |
| MX7D_PAD_EPDC_DATA12__GPIO2_IO12 0x7d |
| MX7D_PAD_SAI1_TX_SYNC__GPIO6_IO14 0x7d |
| MX7D_PAD_EPDC_DATA13__GPIO2_IO13 0x7d |
| MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x7d |
| MX7D_PAD_SD2_CD_B__GPIO5_IO9 0x7d |
| MX7D_PAD_EPDC_GDCLK__GPIO2_IO24 0x7d |
| MX7D_PAD_SAI2_RX_DATA__GPIO6_IO21 0x7d |
| MX7D_PAD_EPDC_GDOE__GPIO2_IO25 0x7d |
| MX7D_PAD_EPDC_GDRL__GPIO2_IO26 0x7d |
| MX7D_PAD_SAI2_TX_DATA__GPIO6_IO22 0x7d |
| MX7D_PAD_EPDC_SDCE0__GPIO2_IO20 0x7d |
| MX7D_PAD_SAI2_TX_BCLK__GPIO6_IO20 0x7d |
| MX7D_PAD_EPDC_SDCE1__GPIO2_IO21 0x7d |
| MX7D_PAD_SAI2_TX_SYNC__GPIO6_IO19 0x7d |
| MX7D_PAD_EPDC_SDCE2__GPIO2_IO22 0x7d |
| MX7D_PAD_EPDC_SDCE3__GPIO2_IO23 0x7d |
| MX7D_PAD_EPDC_GDSP__GPIO2_IO27 0x7d |
| MX7D_PAD_EPDC_SDCLK__GPIO2_IO16 0x7d |
| MX7D_PAD_EPDC_SDLE__GPIO2_IO17 0x7d |
| MX7D_PAD_EPDC_SDOE__GPIO2_IO18 0x7d |
| MX7D_PAD_EPDC_PWR_COM__GPIO2_IO30 0x7d |
| MX7D_PAD_EPDC_PWR_STAT__GPIO2_IO31 0x7d |
| >; |
| }; |
| |
| pinctrl_lcdif_dat: lcdifdatgrp { |
| fsl,pins = < |
| MX7D_PAD_LCD_DATA00__LCD_DATA0 0x79 |
| MX7D_PAD_LCD_DATA01__LCD_DATA1 0x79 |
| MX7D_PAD_LCD_DATA02__LCD_DATA2 0x79 |
| MX7D_PAD_LCD_DATA03__LCD_DATA3 0x79 |
| MX7D_PAD_LCD_DATA04__LCD_DATA4 0x79 |
| MX7D_PAD_LCD_DATA05__LCD_DATA5 0x79 |
| MX7D_PAD_LCD_DATA06__LCD_DATA6 0x79 |
| MX7D_PAD_LCD_DATA07__LCD_DATA7 0x79 |
| MX7D_PAD_LCD_DATA08__LCD_DATA8 0x79 |
| MX7D_PAD_LCD_DATA09__LCD_DATA9 0x79 |
| MX7D_PAD_LCD_DATA10__LCD_DATA10 0x79 |
| MX7D_PAD_LCD_DATA11__LCD_DATA11 0x79 |
| MX7D_PAD_LCD_DATA12__LCD_DATA12 0x79 |
| MX7D_PAD_LCD_DATA13__LCD_DATA13 0x79 |
| MX7D_PAD_LCD_DATA14__LCD_DATA14 0x79 |
| MX7D_PAD_LCD_DATA15__LCD_DATA15 0x79 |
| MX7D_PAD_LCD_DATA16__LCD_DATA16 0x79 |
| MX7D_PAD_LCD_DATA17__LCD_DATA17 0x79 |
| MX7D_PAD_LCD_DATA18__LCD_DATA18 0x79 |
| MX7D_PAD_LCD_DATA19__LCD_DATA19 0x79 |
| MX7D_PAD_LCD_DATA20__LCD_DATA20 0x79 |
| MX7D_PAD_LCD_DATA21__LCD_DATA21 0x79 |
| MX7D_PAD_LCD_DATA22__LCD_DATA22 0x79 |
| MX7D_PAD_LCD_DATA23__LCD_DATA23 0x79 |
| >; |
| }; |
| |
| pinctrl_lcdif_ctrl: lcdifctrlgrp { |
| fsl,pins = < |
| MX7D_PAD_LCD_CLK__LCD_CLK 0x79 |
| MX7D_PAD_LCD_ENABLE__LCD_ENABLE 0x79 |
| MX7D_PAD_LCD_VSYNC__LCD_VSYNC 0x79 |
| MX7D_PAD_LCD_HSYNC__LCD_HSYNC 0x79 |
| >; |
| }; |
| |
| pinctrl_pwm2: pwm2grp { |
| fsl,pins = < |
| MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x7d |
| >; |
| }; |
| |
| pinctrl_uart1: uart1grp { |
| fsl,pins = < |
| MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 |
| MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79 |
| >; |
| }; |
| |
| pinctrl_uart2: uart2grp { |
| fsl,pins = < |
| MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX 0x79 |
| MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX 0x79 |
| >; |
| }; |
| |
| pinctrl_uart3: uart3grp { |
| fsl,pins = < |
| MX7D_PAD_UART3_TX_DATA__UART3_DCE_TX 0x79 |
| MX7D_PAD_UART3_RX_DATA__UART3_DCE_RX 0x79 |
| MX7D_PAD_EPDC_DATA04__GPIO2_IO4 0x7d |
| >; |
| }; |
| |
| pinctrl_uart6: uart6grp { |
| fsl,pins = < |
| MX7D_PAD_ECSPI1_MOSI__UART6_DCE_TX 0x79 |
| MX7D_PAD_ECSPI1_SCLK__UART6_DCE_RX 0x79 |
| MX7D_PAD_ECSPI1_SS0__UART6_DCE_CTS 0x79 |
| MX7D_PAD_ECSPI1_MISO__UART6_DCE_RTS 0x79 |
| >; |
| }; |
| |
| pinctrl_usbotg2: usbotg2grp { |
| fsl,pins = < |
| MX7D_PAD_UART3_RTS_B__USB_OTG2_OC 0x7d |
| MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 |
| >; |
| }; |
| |
| pinctrl_usdhc1: usdhc1grp { |
| fsl,pins = < |
| MX7D_PAD_SD1_CMD__SD1_CMD 0x59 |
| MX7D_PAD_SD1_CLK__SD1_CLK 0x19 |
| MX7D_PAD_SD1_DATA0__SD1_DATA0 0x59 |
| MX7D_PAD_SD1_DATA1__SD1_DATA1 0x59 |
| MX7D_PAD_SD1_DATA2__SD1_DATA2 0x59 |
| MX7D_PAD_SD1_DATA3__SD1_DATA3 0x59 |
| MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x75 |
| MX7D_PAD_SD1_CD_B__GPIO5_IO0 0x75 |
| >; |
| }; |
| |
| pinctrl_usdhc2: usdhc2grp { |
| fsl,pins = < |
| MX7D_PAD_SD2_CMD__SD2_CMD 0x59 |
| MX7D_PAD_SD2_CLK__SD2_CLK 0x19 |
| MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59 |
| MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59 |
| MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59 |
| MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59 |
| MX7D_PAD_ECSPI2_SCLK__GPIO4_IO20 0x59 |
| MX7D_PAD_ECSPI2_MOSI__GPIO4_IO21 0x59 |
| >; |
| }; |
| |
| pinctrl_usdhc3: usdhc3grp { |
| fsl,pins = < |
| MX7D_PAD_SD3_CMD__SD3_CMD 0x59 |
| MX7D_PAD_SD3_CLK__SD3_CLK 0x19 |
| MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59 |
| MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59 |
| MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59 |
| MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59 |
| MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59 |
| MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59 |
| MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59 |
| MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59 |
| >; |
| }; |
| }; |
| |
| &iomuxc_lpsr { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hog_2>; |
| |
| pinctrl_hog_2: hoggrp-2 { |
| fsl,pins = < |
| MX7D_PAD_LPSR_GPIO1_IO02__GPIO1_IO2 0x7d |
| MX7D_PAD_LPSR_GPIO1_IO03__CCM_CLKO2 0x7d |
| >; |
| }; |
| |
| pinctrl_backlight_j9: backlightj9grp { |
| fsl,pins = < |
| MX7D_PAD_LPSR_GPIO1_IO07__GPIO1_IO7 0x7d |
| >; |
| }; |
| |
| pinctrl_pwm1: pwm1grp { |
| fsl,pins = < |
| MX7D_PAD_LPSR_GPIO1_IO01__PWM1_OUT 0x7d |
| >; |
| }; |
| |
| pinctrl_usbotg1: usbotg1grp { |
| fsl,pins = < |
| MX7D_PAD_LPSR_GPIO1_IO04__USB_OTG1_OC 0x7d |
| MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x14 |
| >; |
| }; |
| |
| pinctrl_wdog1: wdog1grp { |
| fsl,pins = < |
| MX7D_PAD_LPSR_GPIO1_IO00__WDOG1_WDOG_B 0x75 |
| >; |
| }; |
| }; |
