| // SPDX-License-Identifier: GPL-2.0 |
| /* Copyright (c) 2016, The Linux Foundation. All rights reserved. */ |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/clock/qcom,gcc-msm8998.h> |
| #include <dt-bindings/clock/qcom,gpucc-msm8998.h> |
| #include <dt-bindings/clock/qcom,rpmcc.h> |
| #include <dt-bindings/power/qcom-rpmpd.h> |
| #include <dt-bindings/gpio/gpio.h> |
| |
| / { |
| interrupt-parent = <&intc>; |
| |
| qcom,msm-id = <292 0x0>; |
| |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| chosen { }; |
| |
| memory { |
| device_type = "memory"; |
| /* We expect the bootloader to fill in the reg */ |
| reg = <0 0 0 0>; |
| }; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| hyp_mem: memory@85800000 { |
| reg = <0x0 0x85800000 0x0 0x600000>; |
| no-map; |
| }; |
| |
| xbl_mem: memory@85e00000 { |
| reg = <0x0 0x85e00000 0x0 0x100000>; |
| no-map; |
| }; |
| |
| smem_mem: smem-mem@86000000 { |
| reg = <0x0 0x86000000 0x0 0x200000>; |
| no-map; |
| }; |
| |
| tz_mem: memory@86200000 { |
| reg = <0x0 0x86200000 0x0 0x2d00000>; |
| no-map; |
| }; |
| |
| rmtfs_mem: memory@88f00000 { |
| compatible = "qcom,rmtfs-mem"; |
| reg = <0x0 0x88f00000 0x0 0x200000>; |
| no-map; |
| |
| qcom,client-id = <1>; |
| qcom,vmid = <15>; |
| }; |
| |
| spss_mem: memory@8ab00000 { |
| reg = <0x0 0x8ab00000 0x0 0x700000>; |
| no-map; |
| }; |
| |
| adsp_mem: memory@8b200000 { |
| reg = <0x0 0x8b200000 0x0 0x1a00000>; |
| no-map; |
| }; |
| |
| mpss_mem: memory@8cc00000 { |
| reg = <0x0 0x8cc00000 0x0 0x7000000>; |
| no-map; |
| }; |
| |
| venus_mem: memory@93c00000 { |
| reg = <0x0 0x93c00000 0x0 0x500000>; |
| no-map; |
| }; |
| |
| mba_mem: memory@94100000 { |
| reg = <0x0 0x94100000 0x0 0x200000>; |
| no-map; |
| }; |
| |
| slpi_mem: memory@94300000 { |
| reg = <0x0 0x94300000 0x0 0xf00000>; |
| no-map; |
| }; |
| |
| ipa_fw_mem: memory@95200000 { |
| reg = <0x0 0x95200000 0x0 0x10000>; |
| no-map; |
| }; |
| |
| ipa_gsi_mem: memory@95210000 { |
| reg = <0x0 0x95210000 0x0 0x5000>; |
| no-map; |
| }; |
| |
| gpu_mem: memory@95600000 { |
| reg = <0x0 0x95600000 0x0 0x100000>; |
| no-map; |
| }; |
| |
| wlan_msa_mem: memory@95700000 { |
| reg = <0x0 0x95700000 0x0 0x100000>; |
| no-map; |
| }; |
| }; |
| |
| clocks { |
| xo: xo-board { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <19200000>; |
| clock-output-names = "xo_board"; |
| }; |
| |
| sleep_clk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <32764>; |
| }; |
| }; |
| |
| cpus { |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| CPU0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo280"; |
| reg = <0x0 0x0>; |
| enable-method = "psci"; |
| cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; |
| next-level-cache = <&L2_0>; |
| L2_0: l2-cache { |
| compatible = "arm,arch-cache"; |
| cache-level = <2>; |
| }; |
| L1_I_0: l1-icache { |
| compatible = "arm,arch-cache"; |
| }; |
| L1_D_0: l1-dcache { |
| compatible = "arm,arch-cache"; |
| }; |
| }; |
| |
| CPU1: cpu@1 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo280"; |
| reg = <0x0 0x1>; |
| enable-method = "psci"; |
| cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; |
| next-level-cache = <&L2_0>; |
| L1_I_1: l1-icache { |
| compatible = "arm,arch-cache"; |
| }; |
| L1_D_1: l1-dcache { |
| compatible = "arm,arch-cache"; |
| }; |
| }; |
| |
| CPU2: cpu@2 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo280"; |
| reg = <0x0 0x2>; |
| enable-method = "psci"; |
| cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; |
| next-level-cache = <&L2_0>; |
| L1_I_2: l1-icache { |
| compatible = "arm,arch-cache"; |
| }; |
| L1_D_2: l1-dcache { |
| compatible = "arm,arch-cache"; |
| }; |
| }; |
| |
| CPU3: cpu@3 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo280"; |
| reg = <0x0 0x3>; |
| enable-method = "psci"; |
| cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>; |
| next-level-cache = <&L2_0>; |
| L1_I_3: l1-icache { |
| compatible = "arm,arch-cache"; |
| }; |
| L1_D_3: l1-dcache { |
| compatible = "arm,arch-cache"; |
| }; |
| }; |
| |
| CPU4: cpu@100 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo280"; |
| reg = <0x0 0x100>; |
| enable-method = "psci"; |
| cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; |
| next-level-cache = <&L2_1>; |
| L2_1: l2-cache { |
| compatible = "arm,arch-cache"; |
| cache-level = <2>; |
| }; |
| L1_I_100: l1-icache { |
| compatible = "arm,arch-cache"; |
| }; |
| L1_D_100: l1-dcache { |
| compatible = "arm,arch-cache"; |
| }; |
| }; |
| |
| CPU5: cpu@101 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo280"; |
| reg = <0x0 0x101>; |
| enable-method = "psci"; |
| cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; |
| next-level-cache = <&L2_1>; |
| L1_I_101: l1-icache { |
| compatible = "arm,arch-cache"; |
| }; |
| L1_D_101: l1-dcache { |
| compatible = "arm,arch-cache"; |
| }; |
| }; |
| |
| CPU6: cpu@102 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo280"; |
| reg = <0x0 0x102>; |
| enable-method = "psci"; |
| cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; |
| next-level-cache = <&L2_1>; |
| L1_I_102: l1-icache { |
| compatible = "arm,arch-cache"; |
| }; |
| L1_D_102: l1-dcache { |
| compatible = "arm,arch-cache"; |
| }; |
| }; |
| |
| CPU7: cpu@103 { |
| device_type = "cpu"; |
| compatible = "qcom,kryo280"; |
| reg = <0x0 0x103>; |
| enable-method = "psci"; |
| cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>; |
| next-level-cache = <&L2_1>; |
| L1_I_103: l1-icache { |
| compatible = "arm,arch-cache"; |
| }; |
| L1_D_103: l1-dcache { |
| compatible = "arm,arch-cache"; |
| }; |
| }; |
| |
| cpu-map { |
| cluster0 { |
| core0 { |
| cpu = <&CPU0>; |
| }; |
| |
| core1 { |
| cpu = <&CPU1>; |
| }; |
| |
| core2 { |
| cpu = <&CPU2>; |
| }; |
| |
| core3 { |
| cpu = <&CPU3>; |
| }; |
| }; |
| |
| cluster1 { |
| core0 { |
| cpu = <&CPU4>; |
| }; |
| |
| core1 { |
| cpu = <&CPU5>; |
| }; |
| |
| core2 { |
| cpu = <&CPU6>; |
| }; |
| |
| core3 { |
| cpu = <&CPU7>; |
| }; |
| }; |
| }; |
| |
| idle-states { |
| entry-method = "psci"; |
| |
| LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { |
| compatible = "arm,idle-state"; |
| idle-state-name = "little-retention"; |
| arm,psci-suspend-param = <0x00000002>; |
| entry-latency-us = <81>; |
| exit-latency-us = <86>; |
| min-residency-us = <200>; |
| }; |
| |
| LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 { |
| compatible = "arm,idle-state"; |
| idle-state-name = "little-power-collapse"; |
| arm,psci-suspend-param = <0x40000003>; |
| entry-latency-us = <273>; |
| exit-latency-us = <612>; |
| min-residency-us = <1000>; |
| local-timer-stop; |
| }; |
| |
| BIG_CPU_SLEEP_0: cpu-sleep-1-0 { |
| compatible = "arm,idle-state"; |
| idle-state-name = "big-retention"; |
| arm,psci-suspend-param = <0x00000002>; |
| entry-latency-us = <79>; |
| exit-latency-us = <82>; |
| min-residency-us = <200>; |
| }; |
| |
| BIG_CPU_SLEEP_1: cpu-sleep-1-1 { |
| compatible = "arm,idle-state"; |
| idle-state-name = "big-power-collapse"; |
| arm,psci-suspend-param = <0x40000003>; |
| entry-latency-us = <336>; |
| exit-latency-us = <525>; |
| min-residency-us = <1000>; |
| local-timer-stop; |
| }; |
| }; |
| }; |
| |
| firmware { |
| scm { |
| compatible = "qcom,scm-msm8998", "qcom,scm"; |
| }; |
| }; |
| |
| tcsr_mutex: hwlock { |
| compatible = "qcom,tcsr-mutex"; |
| syscon = <&tcsr_mutex_regs 0 0x1000>; |
| #hwlock-cells = <1>; |
| }; |
| |
| psci { |
| compatible = "arm,psci-1.0"; |
| method = "smc"; |
| }; |
| |
| rpm-glink { |
| compatible = "qcom,glink-rpm"; |
| |
| interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; |
| qcom,rpm-msg-ram = <&rpm_msg_ram>; |
| mboxes = <&apcs_glb 0>; |
| |
| rpm_requests: rpm-requests { |
| compatible = "qcom,rpm-msm8998"; |
| qcom,glink-channels = "rpm_requests"; |
| |
| rpmcc: clock-controller { |
| compatible = "qcom,rpmcc-msm8998", "qcom,rpmcc"; |
| #clock-cells = <1>; |
| }; |
| |
| rpmpd: power-controller { |
| compatible = "qcom,msm8998-rpmpd"; |
| #power-domain-cells = <1>; |
| operating-points-v2 = <&rpmpd_opp_table>; |
| |
| rpmpd_opp_table: opp-table { |
| compatible = "operating-points-v2"; |
| |
| rpmpd_opp_ret: opp1 { |
| opp-level = <16>; |
| }; |
| |
| rpmpd_opp_ret_plus: opp2 { |
| opp-level = <32>; |
| }; |
| |
| rpmpd_opp_min_svs: opp3 { |
| opp-level = <48>; |
| }; |
| |
| rpmpd_opp_low_svs: opp4 { |
| opp-level = <64>; |
| }; |
| |
| rpmpd_opp_svs: opp5 { |
| opp-level = <128>; |
| }; |
| |
| rpmpd_opp_svs_plus: opp6 { |
| opp-level = <192>; |
| }; |
| |
| rpmpd_opp_nom: opp7 { |
| opp-level = <256>; |
| }; |
| |
| rpmpd_opp_nom_plus: opp8 { |
| opp-level = <320>; |
| }; |
| |
| rpmpd_opp_turbo: opp9 { |
| opp-level = <384>; |
| }; |
| |
| rpmpd_opp_turbo_plus: opp10 { |
| opp-level = <512>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| smem { |
| compatible = "qcom,smem"; |
| memory-region = <&smem_mem>; |
| hwlocks = <&tcsr_mutex 3>; |
| }; |
| |
| smp2p-lpass { |
| compatible = "qcom,smp2p"; |
| qcom,smem = <443>, <429>; |
| |
| interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; |
| |
| mboxes = <&apcs_glb 10>; |
| |
| qcom,local-pid = <0>; |
| qcom,remote-pid = <2>; |
| |
| adsp_smp2p_out: master-kernel { |
| qcom,entry-name = "master-kernel"; |
| #qcom,smem-state-cells = <1>; |
| }; |
| |
| adsp_smp2p_in: slave-kernel { |
| qcom,entry-name = "slave-kernel"; |
| |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| smp2p-mpss { |
| compatible = "qcom,smp2p"; |
| qcom,smem = <435>, <428>; |
| interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>; |
| mboxes = <&apcs_glb 14>; |
| qcom,local-pid = <0>; |
| qcom,remote-pid = <1>; |
| |
| modem_smp2p_out: master-kernel { |
| qcom,entry-name = "master-kernel"; |
| #qcom,smem-state-cells = <1>; |
| }; |
| |
| modem_smp2p_in: slave-kernel { |
| qcom,entry-name = "slave-kernel"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| smp2p-slpi { |
| compatible = "qcom,smp2p"; |
| qcom,smem = <481>, <430>; |
| interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>; |
| mboxes = <&apcs_glb 26>; |
| qcom,local-pid = <0>; |
| qcom,remote-pid = <3>; |
| |
| slpi_smp2p_out: master-kernel { |
| qcom,entry-name = "master-kernel"; |
| #qcom,smem-state-cells = <1>; |
| }; |
| |
| slpi_smp2p_in: slave-kernel { |
| qcom,entry-name = "slave-kernel"; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| thermal-zones { |
| cpu0-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens0 1>; |
| |
| trips { |
| cpu0_alert0: trip-point0 { |
| temperature = <75000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu0_crit: cpu_crit { |
| temperature = <110000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu1-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens0 2>; |
| |
| trips { |
| cpu1_alert0: trip-point0 { |
| temperature = <75000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu1_crit: cpu_crit { |
| temperature = <110000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu2-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens0 3>; |
| |
| trips { |
| cpu2_alert0: trip-point0 { |
| temperature = <75000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu2_crit: cpu_crit { |
| temperature = <110000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu3-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens0 4>; |
| |
| trips { |
| cpu3_alert0: trip-point0 { |
| temperature = <75000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu3_crit: cpu_crit { |
| temperature = <110000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu4-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens0 7>; |
| |
| trips { |
| cpu4_alert0: trip-point0 { |
| temperature = <75000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu4_crit: cpu_crit { |
| temperature = <110000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu5-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens0 8>; |
| |
| trips { |
| cpu5_alert0: trip-point0 { |
| temperature = <75000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu5_crit: cpu_crit { |
| temperature = <110000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu6-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens0 9>; |
| |
| trips { |
| cpu6_alert0: trip-point0 { |
| temperature = <75000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu6_crit: cpu_crit { |
| temperature = <110000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| cpu7-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens0 10>; |
| |
| trips { |
| cpu7_alert0: trip-point0 { |
| temperature = <75000>; |
| hysteresis = <2000>; |
| type = "passive"; |
| }; |
| |
| cpu7_crit: cpu_crit { |
| temperature = <110000>; |
| hysteresis = <2000>; |
| type = "critical"; |
| }; |
| }; |
| }; |
| |
| gpu-thermal-bottom { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens0 12>; |
| |
| trips { |
| gpu1_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| }; |
| }; |
| |
| gpu-thermal-top { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens0 13>; |
| |
| trips { |
| gpu2_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| }; |
| }; |
| |
| clust0-mhm-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens0 5>; |
| |
| trips { |
| cluster0_mhm_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| }; |
| }; |
| |
| clust1-mhm-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens0 6>; |
| |
| trips { |
| cluster1_mhm_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| }; |
| }; |
| |
| cluster1-l2-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens0 11>; |
| |
| trips { |
| cluster1_l2_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| }; |
| }; |
| |
| modem-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens1 1>; |
| |
| trips { |
| modem_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| }; |
| }; |
| |
| mem-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens1 2>; |
| |
| trips { |
| mem_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| }; |
| }; |
| |
| wlan-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens1 3>; |
| |
| trips { |
| wlan_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| }; |
| }; |
| |
| q6-dsp-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens1 4>; |
| |
| trips { |
| q6_dsp_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| }; |
| }; |
| |
| camera-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens1 5>; |
| |
| trips { |
| camera_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| }; |
| }; |
| |
| multimedia-thermal { |
| polling-delay-passive = <250>; |
| polling-delay = <1000>; |
| |
| thermal-sensors = <&tsens1 6>; |
| |
| trips { |
| multimedia_alert0: trip-point0 { |
| temperature = <90000>; |
| hysteresis = <2000>; |
| type = "hot"; |
| }; |
| }; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 1 IRQ_TYPE_LEVEL_LOW>, |
| <GIC_PPI 2 IRQ_TYPE_LEVEL_LOW>, |
| <GIC_PPI 3 IRQ_TYPE_LEVEL_LOW>, |
| <GIC_PPI 0 IRQ_TYPE_LEVEL_LOW>; |
| }; |
| |
| soc: soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0 0 0xffffffff>; |
| compatible = "simple-bus"; |
| |
| gcc: clock-controller@100000 { |
| compatible = "qcom,gcc-msm8998"; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| #power-domain-cells = <1>; |
| reg = <0x00100000 0xb0000>; |
| }; |
| |
| rpm_msg_ram: memory@778000 { |
| compatible = "qcom,rpm-msg-ram"; |
| reg = <0x00778000 0x7000>; |
| }; |
| |
| qfprom: qfprom@780000 { |
| compatible = "qcom,qfprom"; |
| reg = <0x00780000 0x621c>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| qusb2_hstx_trim: hstx-trim@423a { |
| reg = <0x423a 0x1>; |
| bits = <0 4>; |
| }; |
| }; |
| |
| tsens0: thermal@10ab000 { |
| compatible = "qcom,msm8998-tsens", "qcom,tsens-v2"; |
| reg = <0x010ab000 0x1000>, /* TM */ |
| <0x010aa000 0x1000>; /* SROT */ |
| #qcom,sensors = <14>; |
| interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "uplow", "critical"; |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| tsens1: thermal@10ae000 { |
| compatible = "qcom,msm8998-tsens", "qcom,tsens-v2"; |
| reg = <0x010ae000 0x1000>, /* TM */ |
| <0x010ad000 0x1000>; /* SROT */ |
| #qcom,sensors = <8>; |
| interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "uplow", "critical"; |
| #thermal-sensor-cells = <1>; |
| }; |
| |
| anoc1_smmu: iommu@1680000 { |
| compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2"; |
| reg = <0x01680000 0x10000>; |
| #iommu-cells = <1>; |
| |
| #global-interrupts = <0>; |
| interrupts = |
| <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 366 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 367 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 368 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 369 IRQ_TYPE_EDGE_RISING>; |
| }; |
| |
| anoc2_smmu: iommu@16c0000 { |
| compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2"; |
| reg = <0x016c0000 0x40000>; |
| #iommu-cells = <1>; |
| |
| #global-interrupts = <0>; |
| interrupts = |
| <GIC_SPI 373 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 374 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 375 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 376 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 377 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 378 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 462 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 463 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>, |
| <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>; |
| }; |
| |
| pcie0: pci@1c00000 { |
| compatible = "qcom,pcie-msm8996"; |
| reg = <0x01c00000 0x2000>, |
| <0x1b000000 0xf1d>, |
| <0x1b000f20 0xa8>, |
| <0x1b100000 0x100000>; |
| reg-names = "parf", "dbi", "elbi", "config"; |
| device_type = "pci"; |
| linux,pci-domain = <0>; |
| bus-range = <0x00 0xff>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| num-lanes = <1>; |
| phys = <&pciephy>; |
| phy-names = "pciephy"; |
| |
| ranges = <0x01000000 0x0 0x1b200000 0x1b200000 0x0 0x100000>, |
| <0x02000000 0x0 0x1b300000 0x1b300000 0x0 0xd00000>; |
| |
| #interrupt-cells = <1>; |
| interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "msi"; |
| interrupt-map-mask = <0 0 0 0x7>; |
| interrupt-map = <0 0 0 1 &intc 0 135 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 2 &intc 0 136 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 3 &intc 0 138 IRQ_TYPE_LEVEL_HIGH>, |
| <0 0 0 4 &intc 0 139 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_PCIE_0_PIPE_CLK>, |
| <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, |
| <&gcc GCC_PCIE_0_SLV_AXI_CLK>, |
| <&gcc GCC_PCIE_0_CFG_AHB_CLK>, |
| <&gcc GCC_PCIE_0_AUX_CLK>; |
| clock-names = "pipe", "bus_master", "bus_slave", "cfg", "aux"; |
| |
| power-domains = <&gcc PCIE_0_GDSC>; |
| iommu-map = <0x100 &anoc1_smmu 0x1480 1>; |
| perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; |
| }; |
| |
| phy@1c06000 { |
| compatible = "qcom,msm8998-qmp-pcie-phy"; |
| reg = <0x01c06000 0x18c>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>, |
| <&gcc GCC_PCIE_0_CFG_AHB_CLK>, |
| <&gcc GCC_PCIE_CLKREF_CLK>; |
| clock-names = "aux", "cfg_ahb", "ref"; |
| |
| resets = <&gcc GCC_PCIE_0_PHY_BCR>, <&gcc GCC_PCIE_PHY_BCR>; |
| reset-names = "phy", "common"; |
| |
| vdda-phy-supply = <&vreg_l1a_0p875>; |
| vdda-pll-supply = <&vreg_l2a_1p2>; |
| |
| pciephy: lane@1c06800 { |
| reg = <0x01c06200 0x128>, <0x01c06400 0x1fc>, <0x01c06800 0x20c>; |
| #phy-cells = <0>; |
| |
| clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; |
| clock-names = "pipe0"; |
| clock-output-names = "pcie_0_pipe_clk_src"; |
| #clock-cells = <0>; |
| }; |
| }; |
| |
| ufshc: ufshc@1da4000 { |
| compatible = "qcom,msm8998-ufshc", "qcom,ufshc", "jedec,ufs-2.0"; |
| reg = <0x01da4000 0x2500>; |
| interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; |
| phys = <&ufsphy_lanes>; |
| phy-names = "ufsphy"; |
| lanes-per-direction = <2>; |
| power-domains = <&gcc UFS_GDSC>; |
| #reset-cells = <1>; |
| |
| clock-names = |
| "core_clk", |
| "bus_aggr_clk", |
| "iface_clk", |
| "core_clk_unipro", |
| "ref_clk", |
| "tx_lane0_sync_clk", |
| "rx_lane0_sync_clk", |
| "rx_lane1_sync_clk"; |
| clocks = |
| <&gcc GCC_UFS_AXI_CLK>, |
| <&gcc GCC_AGGRE1_UFS_AXI_CLK>, |
| <&gcc GCC_UFS_AHB_CLK>, |
| <&gcc GCC_UFS_UNIPRO_CORE_CLK>, |
| <&rpmcc RPM_SMD_LN_BB_CLK1>, |
| <&gcc GCC_UFS_TX_SYMBOL_0_CLK>, |
| <&gcc GCC_UFS_RX_SYMBOL_0_CLK>, |
| <&gcc GCC_UFS_RX_SYMBOL_1_CLK>; |
| freq-table-hz = |
| <50000000 200000000>, |
| <0 0>, |
| <0 0>, |
| <37500000 150000000>, |
| <0 0>, |
| <0 0>, |
| <0 0>, |
| <0 0>; |
| |
| resets = <&gcc GCC_UFS_BCR>; |
| reset-names = "rst"; |
| }; |
| |
| ufsphy: phy@1da7000 { |
| compatible = "qcom,msm8998-qmp-ufs-phy"; |
| reg = <0x01da7000 0x18c>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| clock-names = |
| "ref", |
| "ref_aux"; |
| clocks = |
| <&gcc GCC_UFS_CLKREF_CLK>, |
| <&gcc GCC_UFS_PHY_AUX_CLK>; |
| |
| reset-names = "ufsphy"; |
| resets = <&ufshc 0>; |
| |
| ufsphy_lanes: lanes@1da7400 { |
| reg = <0x01da7400 0x128>, |
| <0x01da7600 0x1fc>, |
| <0x01da7c00 0x1dc>, |
| <0x01da7800 0x128>, |
| <0x01da7a00 0x1fc>; |
| #phy-cells = <0>; |
| }; |
| }; |
| |
| tcsr_mutex_regs: syscon@1f40000 { |
| compatible = "syscon"; |
| reg = <0x01f40000 0x40000>; |
| }; |
| |
| tlmm: pinctrl@3400000 { |
| compatible = "qcom,msm8998-pinctrl"; |
| reg = <0x03400000 0xc00000>; |
| interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <0x2>; |
| interrupt-controller; |
| #interrupt-cells = <0x2>; |
| }; |
| |
| remoteproc_mss: remoteproc@4080000 { |
| compatible = "qcom,msm8998-mss-pil"; |
| reg = <0x04080000 0x100>, <0x04180000 0x20>; |
| reg-names = "qdsp6", "rmb"; |
| |
| interrupts-extended = |
| <&intc GIC_SPI 448 IRQ_TYPE_EDGE_RISING>, |
| <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, |
| <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, |
| <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, |
| <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, |
| <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "wdog", "fatal", "ready", |
| "handover", "stop-ack", |
| "shutdown-ack"; |
| |
| clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, |
| <&gcc GCC_BIMC_MSS_Q6_AXI_CLK>, |
| <&gcc GCC_BOOT_ROM_AHB_CLK>, |
| <&gcc GCC_MSS_GPLL0_DIV_CLK_SRC>, |
| <&gcc GCC_MSS_SNOC_AXI_CLK>, |
| <&gcc GCC_MSS_MNOC_BIMC_AXI_CLK>, |
| <&rpmcc RPM_SMD_QDSS_CLK>, |
| <&rpmcc RPM_SMD_XO_CLK_SRC>; |
| clock-names = "iface", "bus", "mem", "gpll0_mss", |
| "snoc_axi", "mnoc_axi", "qdss", "xo"; |
| |
| qcom,smem-states = <&modem_smp2p_out 0>; |
| qcom,smem-state-names = "stop"; |
| |
| resets = <&gcc GCC_MSS_RESTART>; |
| reset-names = "mss_restart"; |
| |
| qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>; |
| |
| power-domains = <&rpmpd MSM8998_VDDCX>, |
| <&rpmpd MSM8998_VDDMX>; |
| power-domain-names = "cx", "mx"; |
| |
| mba { |
| memory-region = <&mba_mem>; |
| }; |
| |
| mpss { |
| memory-region = <&mpss_mem>; |
| }; |
| |
| glink-edge { |
| interrupts = <GIC_SPI 452 IRQ_TYPE_EDGE_RISING>; |
| label = "modem"; |
| qcom,remote-pid = <1>; |
| mboxes = <&apcs_glb 15>; |
| }; |
| }; |
| |
| gpucc: clock-controller@5065000 { |
| compatible = "qcom,msm8998-gpucc"; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| #power-domain-cells = <1>; |
| reg = <0x05065000 0x9000>; |
| |
| clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, |
| <&gcc GPLL0_OUT_MAIN>; |
| clock-names = "xo", |
| "gpll0"; |
| }; |
| |
| remoteproc_slpi: remoteproc@5800000 { |
| compatible = "qcom,msm8998-slpi-pas"; |
| reg = <0x05800000 0x4040>; |
| |
| interrupts-extended = <&intc GIC_SPI 390 IRQ_TYPE_EDGE_RISING>, |
| <&slpi_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, |
| <&slpi_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, |
| <&slpi_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, |
| <&slpi_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "wdog", "fatal", "ready", |
| "handover", "stop-ack"; |
| |
| px-supply = <&vreg_lvs2a_1p8>; |
| |
| clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, |
| <&rpmcc RPM_SMD_AGGR2_NOC_CLK>; |
| clock-names = "xo", "aggre2"; |
| |
| memory-region = <&slpi_mem>; |
| |
| qcom,smem-states = <&slpi_smp2p_out 0>; |
| qcom,smem-state-names = "stop"; |
| |
| power-domains = <&rpmpd MSM8998_SSCCX>; |
| power-domain-names = "ssc_cx"; |
| |
| status = "disabled"; |
| |
| glink-edge { |
| interrupts = <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>; |
| label = "dsps"; |
| qcom,remote-pid = <3>; |
| mboxes = <&apcs_glb 27>; |
| }; |
| }; |
| |
| stm: stm@6002000 { |
| compatible = "arm,coresight-stm", "arm,primecell"; |
| reg = <0x06002000 0x1000>, |
| <0x16280000 0x180000>; |
| reg-names = "stm-base", "stm-data-base"; |
| status = "disabled"; |
| |
| clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; |
| clock-names = "apb_pclk", "atclk"; |
| |
| out-ports { |
| port { |
| stm_out: endpoint { |
| remote-endpoint = <&funnel0_in7>; |
| }; |
| }; |
| }; |
| }; |
| |
| funnel1: funnel@6041000 { |
| compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| reg = <0x06041000 0x1000>; |
| status = "disabled"; |
| |
| clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; |
| clock-names = "apb_pclk", "atclk"; |
| |
| out-ports { |
| port { |
| funnel0_out: endpoint { |
| remote-endpoint = |
| <&merge_funnel_in0>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@7 { |
| reg = <7>; |
| funnel0_in7: endpoint { |
| remote-endpoint = <&stm_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| funnel2: funnel@6042000 { |
| compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| reg = <0x06042000 0x1000>; |
| status = "disabled"; |
| |
| clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; |
| clock-names = "apb_pclk", "atclk"; |
| |
| out-ports { |
| port { |
| funnel1_out: endpoint { |
| remote-endpoint = |
| <&merge_funnel_in1>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@6 { |
| reg = <6>; |
| funnel1_in6: endpoint { |
| remote-endpoint = |
| <&apss_merge_funnel_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| funnel3: funnel@6045000 { |
| compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| reg = <0x06045000 0x1000>; |
| status = "disabled"; |
| |
| clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; |
| clock-names = "apb_pclk", "atclk"; |
| |
| out-ports { |
| port { |
| merge_funnel_out: endpoint { |
| remote-endpoint = |
| <&etf_in>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| merge_funnel_in0: endpoint { |
| remote-endpoint = |
| <&funnel0_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| merge_funnel_in1: endpoint { |
| remote-endpoint = |
| <&funnel1_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| replicator1: replicator@6046000 { |
| compatible = "arm,coresight-dynamic-replicator", "arm,primecell"; |
| reg = <0x06046000 0x1000>; |
| status = "disabled"; |
| |
| clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; |
| clock-names = "apb_pclk", "atclk"; |
| |
| out-ports { |
| port { |
| replicator_out: endpoint { |
| remote-endpoint = <&etr_in>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| port { |
| replicator_in: endpoint { |
| remote-endpoint = <&etf_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| etf: etf@6047000 { |
| compatible = "arm,coresight-tmc", "arm,primecell"; |
| reg = <0x06047000 0x1000>; |
| status = "disabled"; |
| |
| clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; |
| clock-names = "apb_pclk", "atclk"; |
| |
| out-ports { |
| port { |
| etf_out: endpoint { |
| remote-endpoint = |
| <&replicator_in>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| port { |
| etf_in: endpoint { |
| remote-endpoint = |
| <&merge_funnel_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| etr: etr@6048000 { |
| compatible = "arm,coresight-tmc", "arm,primecell"; |
| reg = <0x06048000 0x1000>; |
| status = "disabled"; |
| |
| clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; |
| clock-names = "apb_pclk", "atclk"; |
| arm,scatter-gather; |
| |
| in-ports { |
| port { |
| etr_in: endpoint { |
| remote-endpoint = |
| <&replicator_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| etm1: etm@7840000 { |
| compatible = "arm,coresight-etm4x", "arm,primecell"; |
| reg = <0x07840000 0x1000>; |
| status = "disabled"; |
| |
| clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; |
| clock-names = "apb_pclk", "atclk"; |
| |
| cpu = <&CPU0>; |
| |
| out-ports { |
| port { |
| etm0_out: endpoint { |
| remote-endpoint = |
| <&apss_funnel_in0>; |
| }; |
| }; |
| }; |
| }; |
| |
| etm2: etm@7940000 { |
| compatible = "arm,coresight-etm4x", "arm,primecell"; |
| reg = <0x07940000 0x1000>; |
| status = "disabled"; |
| |
| clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; |
| clock-names = "apb_pclk", "atclk"; |
| |
| cpu = <&CPU1>; |
| |
| out-ports { |
| port { |
| etm1_out: endpoint { |
| remote-endpoint = |
| <&apss_funnel_in1>; |
| }; |
| }; |
| }; |
| }; |
| |
| etm3: etm@7a40000 { |
| compatible = "arm,coresight-etm4x", "arm,primecell"; |
| reg = <0x07a40000 0x1000>; |
| status = "disabled"; |
| |
| clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; |
| clock-names = "apb_pclk", "atclk"; |
| |
| cpu = <&CPU2>; |
| |
| out-ports { |
| port { |
| etm2_out: endpoint { |
| remote-endpoint = |
| <&apss_funnel_in2>; |
| }; |
| }; |
| }; |
| }; |
| |
| etm4: etm@7b40000 { |
| compatible = "arm,coresight-etm4x", "arm,primecell"; |
| reg = <0x07b40000 0x1000>; |
| status = "disabled"; |
| |
| clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; |
| clock-names = "apb_pclk", "atclk"; |
| |
| cpu = <&CPU3>; |
| |
| out-ports { |
| port { |
| etm3_out: endpoint { |
| remote-endpoint = |
| <&apss_funnel_in3>; |
| }; |
| }; |
| }; |
| }; |
| |
| funnel4: funnel@7b60000 { /* APSS Funnel */ |
| compatible = "arm,coresight-etm4x", "arm,primecell"; |
| reg = <0x07b60000 0x1000>; |
| status = "disabled"; |
| |
| clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; |
| clock-names = "apb_pclk", "atclk"; |
| |
| out-ports { |
| port { |
| apss_funnel_out: endpoint { |
| remote-endpoint = |
| <&apss_merge_funnel_in>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| port@0 { |
| reg = <0>; |
| apss_funnel_in0: endpoint { |
| remote-endpoint = |
| <&etm0_out>; |
| }; |
| }; |
| |
| port@1 { |
| reg = <1>; |
| apss_funnel_in1: endpoint { |
| remote-endpoint = |
| <&etm1_out>; |
| }; |
| }; |
| |
| port@2 { |
| reg = <2>; |
| apss_funnel_in2: endpoint { |
| remote-endpoint = |
| <&etm2_out>; |
| }; |
| }; |
| |
| port@3 { |
| reg = <3>; |
| apss_funnel_in3: endpoint { |
| remote-endpoint = |
| <&etm3_out>; |
| }; |
| }; |
| |
| port@4 { |
| reg = <4>; |
| apss_funnel_in4: endpoint { |
| remote-endpoint = |
| <&etm4_out>; |
| }; |
| }; |
| |
| port@5 { |
| reg = <5>; |
| apss_funnel_in5: endpoint { |
| remote-endpoint = |
| <&etm5_out>; |
| }; |
| }; |
| |
| port@6 { |
| reg = <6>; |
| apss_funnel_in6: endpoint { |
| remote-endpoint = |
| <&etm6_out>; |
| }; |
| }; |
| |
| port@7 { |
| reg = <7>; |
| apss_funnel_in7: endpoint { |
| remote-endpoint = |
| <&etm7_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| funnel5: funnel@7b70000 { |
| compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; |
| reg = <0x07b70000 0x1000>; |
| status = "disabled"; |
| |
| clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; |
| clock-names = "apb_pclk", "atclk"; |
| |
| out-ports { |
| port { |
| apss_merge_funnel_out: endpoint { |
| remote-endpoint = |
| <&funnel1_in6>; |
| }; |
| }; |
| }; |
| |
| in-ports { |
| port { |
| apss_merge_funnel_in: endpoint { |
| remote-endpoint = |
| <&apss_funnel_out>; |
| }; |
| }; |
| }; |
| }; |
| |
| etm5: etm@7c40000 { |
| compatible = "arm,coresight-etm4x", "arm,primecell"; |
| reg = <0x07c40000 0x1000>; |
| status = "disabled"; |
| |
| clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; |
| clock-names = "apb_pclk", "atclk"; |
| |
| cpu = <&CPU4>; |
| |
| port{ |
| etm4_out: endpoint { |
| remote-endpoint = <&apss_funnel_in4>; |
| }; |
| }; |
| }; |
| |
| etm6: etm@7d40000 { |
| compatible = "arm,coresight-etm4x", "arm,primecell"; |
| reg = <0x07d40000 0x1000>; |
| status = "disabled"; |
| |
| clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; |
| clock-names = "apb_pclk", "atclk"; |
| |
| cpu = <&CPU5>; |
| |
| port{ |
| etm5_out: endpoint { |
| remote-endpoint = <&apss_funnel_in5>; |
| }; |
| }; |
| }; |
| |
| etm7: etm@7e40000 { |
| compatible = "arm,coresight-etm4x", "arm,primecell"; |
| reg = <0x07e40000 0x1000>; |
| status = "disabled"; |
| |
| clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; |
| clock-names = "apb_pclk", "atclk"; |
| |
| cpu = <&CPU6>; |
| |
| port{ |
| etm6_out: endpoint { |
| remote-endpoint = <&apss_funnel_in6>; |
| }; |
| }; |
| }; |
| |
| etm8: etm@7f40000 { |
| compatible = "arm,coresight-etm4x", "arm,primecell"; |
| reg = <0x07f40000 0x1000>; |
| status = "disabled"; |
| |
| clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>; |
| clock-names = "apb_pclk", "atclk"; |
| |
| cpu = <&CPU7>; |
| |
| port{ |
| etm7_out: endpoint { |
| remote-endpoint = <&apss_funnel_in7>; |
| }; |
| }; |
| }; |
| |
| spmi_bus: spmi@800f000 { |
| compatible = "qcom,spmi-pmic-arb"; |
| reg = <0x0800f000 0x1000>, |
| <0x08400000 0x1000000>, |
| <0x09400000 0x1000000>, |
| <0x0a400000 0x220000>, |
| <0x0800a000 0x3000>; |
| reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; |
| interrupt-names = "periph_irq"; |
| interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>; |
| qcom,ee = <0>; |
| qcom,channel = <0>; |
| #address-cells = <2>; |
| #size-cells = <0>; |
| interrupt-controller; |
| #interrupt-cells = <4>; |
| cell-index = <0>; |
| }; |
| |
| usb3: usb@a8f8800 { |
| compatible = "qcom,msm8998-dwc3", "qcom,dwc3"; |
| reg = <0x0a8f8800 0x400>; |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| clocks = <&gcc GCC_CFG_NOC_USB3_AXI_CLK>, |
| <&gcc GCC_USB30_MASTER_CLK>, |
| <&gcc GCC_AGGRE1_USB3_AXI_CLK>, |
| <&gcc GCC_USB30_MOCK_UTMI_CLK>, |
| <&gcc GCC_USB30_SLEEP_CLK>; |
| clock-names = "cfg_noc", "core", "iface", "mock_utmi", |
| "sleep"; |
| |
| assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, |
| <&gcc GCC_USB30_MASTER_CLK>; |
| assigned-clock-rates = <19200000>, <120000000>; |
| |
| interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "hs_phy_irq", "ss_phy_irq"; |
| |
| power-domains = <&gcc USB_30_GDSC>; |
| |
| resets = <&gcc GCC_USB_30_BCR>; |
| |
| usb3_dwc3: dwc3@a800000 { |
| compatible = "snps,dwc3"; |
| reg = <0x0a800000 0xcd00>; |
| interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; |
| snps,dis_u2_susphy_quirk; |
| snps,dis_enblslpm_quirk; |
| phys = <&qusb2phy>, <&usb1_ssphy>; |
| phy-names = "usb2-phy", "usb3-phy"; |
| snps,has-lpm-erratum; |
| snps,hird-threshold = /bits/ 8 <0x10>; |
| }; |
| }; |
| |
| usb3phy: phy@c010000 { |
| compatible = "qcom,msm8998-qmp-usb3-phy"; |
| reg = <0x0c010000 0x18c>; |
| status = "disabled"; |
| #clock-cells = <1>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| clocks = <&gcc GCC_USB3_PHY_AUX_CLK>, |
| <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, |
| <&gcc GCC_USB3_CLKREF_CLK>; |
| clock-names = "aux", "cfg_ahb", "ref"; |
| |
| resets = <&gcc GCC_USB3_PHY_BCR>, |
| <&gcc GCC_USB3PHY_PHY_BCR>; |
| reset-names = "phy", "common"; |
| |
| usb1_ssphy: lane@c010200 { |
| reg = <0xc010200 0x128>, |
| <0xc010400 0x200>, |
| <0xc010c00 0x20c>, |
| <0xc010600 0x128>, |
| <0xc010800 0x200>; |
| #phy-cells = <0>; |
| clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>; |
| clock-names = "pipe0"; |
| clock-output-names = "usb3_phy_pipe_clk_src"; |
| }; |
| }; |
| |
| qusb2phy: phy@c012000 { |
| compatible = "qcom,msm8998-qusb2-phy"; |
| reg = <0x0c012000 0x2a8>; |
| status = "disabled"; |
| #phy-cells = <0>; |
| |
| clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>, |
| <&gcc GCC_RX1_USB2_CLKREF_CLK>; |
| clock-names = "cfg_ahb", "ref"; |
| |
| resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; |
| |
| nvmem-cells = <&qusb2_hstx_trim>; |
| }; |
| |
| sdhc2: sdhci@c0a4900 { |
| compatible = "qcom,sdhci-msm-v4"; |
| reg = <0x0c0a4900 0x314>, <0x0c0a4000 0x800>; |
| reg-names = "hc_mem", "core_mem"; |
| |
| interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "hc_irq", "pwr_irq"; |
| |
| clock-names = "iface", "core", "xo"; |
| clocks = <&gcc GCC_SDCC2_AHB_CLK>, |
| <&gcc GCC_SDCC2_APPS_CLK>, |
| <&xo>; |
| bus-width = <4>; |
| status = "disabled"; |
| }; |
| |
| blsp1_dma: dma@c144000 { |
| compatible = "qcom,bam-v1.7.0"; |
| reg = <0x0c144000 0x25000>; |
| interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "bam_clk"; |
| #dma-cells = <1>; |
| qcom,ee = <0>; |
| qcom,controlled-remotely; |
| num-channels = <18>; |
| qcom,num-ees = <4>; |
| }; |
| |
| blsp1_uart3: serial@c171000 { |
| compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| reg = <0x0c171000 0x1000>; |
| interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| dmas = <&blsp1_dma 4>, <&blsp1_dma 5>; |
| dma-names = "tx", "rx"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&blsp1_uart3_on>; |
| status = "disabled"; |
| }; |
| |
| blsp1_i2c1: i2c@c175000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0x0c175000 0x600>; |
| interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| clock-frequency = <400000>; |
| |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| blsp1_i2c2: i2c@c176000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0x0c176000 0x600>; |
| interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| clock-frequency = <400000>; |
| |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| blsp1_i2c3: i2c@c177000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0x0c177000 0x600>; |
| interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| clock-frequency = <400000>; |
| |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| blsp1_i2c4: i2c@c178000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0x0c178000 0x600>; |
| interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| clock-frequency = <400000>; |
| |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| blsp1_i2c5: i2c@c179000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0x0c179000 0x600>; |
| interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| clock-frequency = <400000>; |
| |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| blsp1_i2c6: i2c@c17a000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0x0c17a000 0x600>; |
| interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, |
| <&gcc GCC_BLSP1_AHB_CLK>; |
| clock-names = "core", "iface"; |
| clock-frequency = <400000>; |
| |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| blsp2_uart1: serial@c1b0000 { |
| compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; |
| reg = <0x0c1b0000 0x1000>; |
| interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, |
| <&gcc GCC_BLSP2_AHB_CLK>; |
| clock-names = "core", "iface"; |
| status = "disabled"; |
| }; |
| |
| blsp2_i2c0: i2c@c1b5000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0x0c1b5000 0x600>; |
| interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>, |
| <&gcc GCC_BLSP2_AHB_CLK>; |
| clock-names = "core", "iface"; |
| clock-frequency = <400000>; |
| |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| blsp2_i2c1: i2c@c1b6000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0x0c1b6000 0x600>; |
| interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, |
| <&gcc GCC_BLSP2_AHB_CLK>; |
| clock-names = "core", "iface"; |
| clock-frequency = <400000>; |
| |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| blsp2_i2c2: i2c@c1b7000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0x0c1b7000 0x600>; |
| interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>, |
| <&gcc GCC_BLSP2_AHB_CLK>; |
| clock-names = "core", "iface"; |
| clock-frequency = <400000>; |
| |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| blsp2_i2c3: i2c@c1b8000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0x0c1b8000 0x600>; |
| interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_BLSP2_QUP4_I2C_APPS_CLK>, |
| <&gcc GCC_BLSP2_AHB_CLK>; |
| clock-names = "core", "iface"; |
| clock-frequency = <400000>; |
| |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| blsp2_i2c4: i2c@c1b9000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0x0c1b9000 0x600>; |
| interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, |
| <&gcc GCC_BLSP2_AHB_CLK>; |
| clock-names = "core", "iface"; |
| clock-frequency = <400000>; |
| |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| blsp2_i2c5: i2c@c1ba000 { |
| compatible = "qcom,i2c-qup-v2.2.1"; |
| reg = <0x0c1ba000 0x600>; |
| interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>; |
| |
| clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, |
| <&gcc GCC_BLSP2_AHB_CLK>; |
| clock-names = "core", "iface"; |
| clock-frequency = <400000>; |
| |
| status = "disabled"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| |
| remoteproc_adsp: remoteproc@17300000 { |
| compatible = "qcom,msm8998-adsp-pas"; |
| reg = <0x17300000 0x4040>; |
| |
| interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>, |
| <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, |
| <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, |
| <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, |
| <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "wdog", "fatal", "ready", |
| "handover", "stop-ack"; |
| |
| clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; |
| clock-names = "xo"; |
| |
| memory-region = <&adsp_mem>; |
| |
| qcom,smem-states = <&adsp_smp2p_out 0>; |
| qcom,smem-state-names = "stop"; |
| |
| power-domains = <&rpmpd MSM8998_VDDCX>; |
| power-domain-names = "cx"; |
| |
| status = "disabled"; |
| |
| glink-edge { |
| interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>; |
| label = "lpass"; |
| qcom,remote-pid = <2>; |
| mboxes = <&apcs_glb 9>; |
| }; |
| }; |
| |
| apcs_glb: mailbox@17911000 { |
| compatible = "qcom,msm8998-apcs-hmss-global"; |
| reg = <0x17911000 0x1000>; |
| |
| #mbox-cells = <1>; |
| }; |
| |
| timer@17920000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| compatible = "arm,armv7-timer-mem"; |
| reg = <0x17920000 0x1000>; |
| |
| frame@17921000 { |
| frame-number = <0>; |
| interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x17921000 0x1000>, |
| <0x17922000 0x1000>; |
| }; |
| |
| frame@17923000 { |
| frame-number = <1>; |
| interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x17923000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@17924000 { |
| frame-number = <2>; |
| interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x17924000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@17925000 { |
| frame-number = <3>; |
| interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x17925000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@17926000 { |
| frame-number = <4>; |
| interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x17926000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@17927000 { |
| frame-number = <5>; |
| interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x17927000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| frame@17928000 { |
| frame-number = <6>; |
| interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; |
| reg = <0x17928000 0x1000>; |
| status = "disabled"; |
| }; |
| }; |
| |
| intc: interrupt-controller@17a00000 { |
| compatible = "arm,gic-v3"; |
| reg = <0x17a00000 0x10000>, /* GICD */ |
| <0x17b00000 0x100000>; /* GICR * 8 */ |
| #interrupt-cells = <3>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| interrupt-controller; |
| #redistributor-regions = <1>; |
| redistributor-stride = <0x0 0x20000>; |
| interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| wifi: wifi@18800000 { |
| compatible = "qcom,wcn3990-wifi"; |
| status = "disabled"; |
| reg = <0x18800000 0x800000>; |
| reg-names = "membase"; |
| memory-region = <&wlan_msa_mem>; |
| clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>; |
| clock-names = "cxo_ref_clk_pin"; |
| interrupts = |
| <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 420 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>; |
| iommus = <&anoc2_smmu 0x1900>, |
| <&anoc2_smmu 0x1901>; |
| qcom,snoc-host-cap-8bit-quirk; |
| }; |
| }; |
| }; |
| |
| #include "msm8998-pins.dtsi" |
