| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| cx231xx-core.c - driver for Conexant Cx23100/101/102 |
| USB video capture devices |
| |
| Copyright (C) 2008 <srinivasa.deevi at conexant dot com> |
| Based on em28xx driver |
| |
| */ |
| |
| #include "cx231xx.h" |
| #include <linux/init.h> |
| #include <linux/list.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/vmalloc.h> |
| #include <media/v4l2-common.h> |
| #include <media/tuner.h> |
| |
| #include "cx231xx-reg.h" |
| |
| /* #define ENABLE_DEBUG_ISOC_FRAMES */ |
| |
| static unsigned int core_debug; |
| module_param(core_debug, int, 0644); |
| MODULE_PARM_DESC(core_debug, "enable debug messages [core]"); |
| |
| #define cx231xx_coredbg(fmt, arg...) do {\ |
| if (core_debug) \ |
| printk(KERN_INFO "%s %s :"fmt, \ |
| dev->name, __func__ , ##arg); } while (0) |
| |
| static unsigned int reg_debug; |
| module_param(reg_debug, int, 0644); |
| MODULE_PARM_DESC(reg_debug, "enable debug messages [URB reg]"); |
| |
| static int alt = CX231XX_PINOUT; |
| module_param(alt, int, 0644); |
| MODULE_PARM_DESC(alt, "alternate setting to use for video endpoint"); |
| |
| #define cx231xx_isocdbg(fmt, arg...) do {\ |
| if (core_debug) \ |
| printk(KERN_INFO "%s %s :"fmt, \ |
| dev->name, __func__ , ##arg); } while (0) |
| |
| /***************************************************************** |
| * Device control list functions * |
| ******************************************************************/ |
| |
| LIST_HEAD(cx231xx_devlist); |
| static DEFINE_MUTEX(cx231xx_devlist_mutex); |
| |
| /* |
| * cx231xx_realease_resources() |
| * unregisters the v4l2,i2c and usb devices |
| * called when the device gets disconnected or at module unload |
| */ |
| void cx231xx_remove_from_devlist(struct cx231xx *dev) |
| { |
| if (dev == NULL) |
| return; |
| if (dev->udev == NULL) |
| return; |
| |
| if (atomic_read(&dev->devlist_count) > 0) { |
| mutex_lock(&cx231xx_devlist_mutex); |
| list_del(&dev->devlist); |
| atomic_dec(&dev->devlist_count); |
| mutex_unlock(&cx231xx_devlist_mutex); |
| } |
| }; |
| |
| void cx231xx_add_into_devlist(struct cx231xx *dev) |
| { |
| mutex_lock(&cx231xx_devlist_mutex); |
| list_add_tail(&dev->devlist, &cx231xx_devlist); |
| atomic_inc(&dev->devlist_count); |
| mutex_unlock(&cx231xx_devlist_mutex); |
| }; |
| |
| static LIST_HEAD(cx231xx_extension_devlist); |
| |
| int cx231xx_register_extension(struct cx231xx_ops *ops) |
| { |
| struct cx231xx *dev = NULL; |
| |
| mutex_lock(&cx231xx_devlist_mutex); |
| list_add_tail(&ops->next, &cx231xx_extension_devlist); |
| list_for_each_entry(dev, &cx231xx_devlist, devlist) { |
| ops->init(dev); |
| dev_info(dev->dev, "%s initialized\n", ops->name); |
| } |
| mutex_unlock(&cx231xx_devlist_mutex); |
| return 0; |
| } |
| EXPORT_SYMBOL(cx231xx_register_extension); |
| |
| void cx231xx_unregister_extension(struct cx231xx_ops *ops) |
| { |
| struct cx231xx *dev = NULL; |
| |
| mutex_lock(&cx231xx_devlist_mutex); |
| list_for_each_entry(dev, &cx231xx_devlist, devlist) { |
| ops->fini(dev); |
| dev_info(dev->dev, "%s removed\n", ops->name); |
| } |
| |
| list_del(&ops->next); |
| mutex_unlock(&cx231xx_devlist_mutex); |
| } |
| EXPORT_SYMBOL(cx231xx_unregister_extension); |
| |
| void cx231xx_init_extension(struct cx231xx *dev) |
| { |
| struct cx231xx_ops *ops = NULL; |
| |
| mutex_lock(&cx231xx_devlist_mutex); |
| if (!list_empty(&cx231xx_extension_devlist)) { |
| list_for_each_entry(ops, &cx231xx_extension_devlist, next) { |
| if (ops->init) |
| ops->init(dev); |
| } |
| } |
| mutex_unlock(&cx231xx_devlist_mutex); |
| } |
| |
| void cx231xx_close_extension(struct cx231xx *dev) |
| { |
| struct cx231xx_ops *ops = NULL; |
| |
| mutex_lock(&cx231xx_devlist_mutex); |
| if (!list_empty(&cx231xx_extension_devlist)) { |
| list_for_each_entry(ops, &cx231xx_extension_devlist, next) { |
| if (ops->fini) |
| ops->fini(dev); |
| } |
| } |
| mutex_unlock(&cx231xx_devlist_mutex); |
| } |
| |
| /**************************************************************** |
| * U S B related functions * |
| *****************************************************************/ |
| int cx231xx_send_usb_command(struct cx231xx_i2c *i2c_bus, |
| struct cx231xx_i2c_xfer_data *req_data) |
| { |
| int status = 0; |
| struct cx231xx *dev = i2c_bus->dev; |
| struct VENDOR_REQUEST_IN ven_req; |
| |
| u8 saddr_len = 0; |
| u8 _i2c_period = 0; |
| u8 _i2c_nostop = 0; |
| u8 _i2c_reserve = 0; |
| |
| if (dev->state & DEV_DISCONNECTED) |
| return -ENODEV; |
| |
| /* Get the I2C period, nostop and reserve parameters */ |
| _i2c_period = i2c_bus->i2c_period; |
| _i2c_nostop = i2c_bus->i2c_nostop; |
| _i2c_reserve = i2c_bus->i2c_reserve; |
| |
| saddr_len = req_data->saddr_len; |
| |
| /* Set wValue */ |
| ven_req.wValue = (req_data->dev_addr << 9 | _i2c_period << 4 | |
| saddr_len << 2 | _i2c_nostop << 1 | I2C_SYNC | |
| _i2c_reserve << 6); |
| |
| /* set channel number */ |
| if (req_data->direction & I2C_M_RD) { |
| /* channel number, for read,spec required channel_num +4 */ |
| ven_req.bRequest = i2c_bus->nr + 4; |
| } else |
| ven_req.bRequest = i2c_bus->nr; /* channel number, */ |
| |
| /* set index value */ |
| switch (saddr_len) { |
| case 0: |
| ven_req.wIndex = 0; /* need check */ |
| break; |
| case 1: |
| ven_req.wIndex = (req_data->saddr_dat & 0xff); |
| break; |
| case 2: |
| ven_req.wIndex = req_data->saddr_dat; |
| break; |
| } |
| |
| /* set wLength value */ |
| ven_req.wLength = req_data->buf_size; |
| |
| /* set bData value */ |
| ven_req.bData = 0; |
| |
| /* set the direction */ |
| if (req_data->direction) { |
| ven_req.direction = USB_DIR_IN; |
| memset(req_data->p_buffer, 0x00, ven_req.wLength); |
| } else |
| ven_req.direction = USB_DIR_OUT; |
| |
| /* set the buffer for read / write */ |
| ven_req.pBuff = req_data->p_buffer; |
| |
| |
| /* call common vendor command request */ |
| status = cx231xx_send_vendor_cmd(dev, &ven_req); |
| if (status < 0 && !dev->i2c_scan_running) { |
| dev_err(dev->dev, "%s: failed with status -%d\n", |
| __func__, status); |
| } |
| |
| return status; |
| } |
| EXPORT_SYMBOL_GPL(cx231xx_send_usb_command); |
| |
| /* |
| * Sends/Receives URB control messages, assuring to use a kalloced buffer |
| * for all operations (dev->urb_buf), to avoid using stacked buffers, as |
| * they aren't safe for usage with USB, due to DMA restrictions. |
| * Also implements the debug code for control URB's. |
| */ |
| static int __usb_control_msg(struct cx231xx *dev, unsigned int pipe, |
| __u8 request, __u8 requesttype, __u16 value, __u16 index, |
| void *data, __u16 size, int timeout) |
| { |
| int rc, i; |
| |
| if (reg_debug) { |
| printk(KERN_DEBUG "%s: (pipe 0x%08x): %s: %02x %02x %02x %02x %02x %02x %02x %02x ", |
| dev->name, |
| pipe, |
| (requesttype & USB_DIR_IN) ? "IN" : "OUT", |
| requesttype, |
| request, |
| value & 0xff, value >> 8, |
| index & 0xff, index >> 8, |
| size & 0xff, size >> 8); |
| if (!(requesttype & USB_DIR_IN)) { |
| printk(KERN_CONT ">>>"); |
| for (i = 0; i < size; i++) |
| printk(KERN_CONT " %02x", |
| ((unsigned char *)data)[i]); |
| } |
| } |
| |
| /* Do the real call to usb_control_msg */ |
| mutex_lock(&dev->ctrl_urb_lock); |
| if (!(requesttype & USB_DIR_IN) && size) |
| memcpy(dev->urb_buf, data, size); |
| rc = usb_control_msg(dev->udev, pipe, request, requesttype, value, |
| index, dev->urb_buf, size, timeout); |
| if ((requesttype & USB_DIR_IN) && size) |
| memcpy(data, dev->urb_buf, size); |
| mutex_unlock(&dev->ctrl_urb_lock); |
| |
| if (reg_debug) { |
| if (unlikely(rc < 0)) { |
| printk(KERN_CONT "FAILED!\n"); |
| return rc; |
| } |
| |
| if ((requesttype & USB_DIR_IN)) { |
| printk(KERN_CONT "<<<"); |
| for (i = 0; i < size; i++) |
| printk(KERN_CONT " %02x", |
| ((unsigned char *)data)[i]); |
| } |
| printk(KERN_CONT "\n"); |
| } |
| |
| return rc; |
| } |
| |
| |
| /* |
| * cx231xx_read_ctrl_reg() |
| * reads data from the usb device specifying bRequest and wValue |
| */ |
| int cx231xx_read_ctrl_reg(struct cx231xx *dev, u8 req, u16 reg, |
| char *buf, int len) |
| { |
| u8 val = 0; |
| int ret; |
| int pipe = usb_rcvctrlpipe(dev->udev, 0); |
| |
| if (dev->state & DEV_DISCONNECTED) |
| return -ENODEV; |
| |
| if (len > URB_MAX_CTRL_SIZE) |
| return -EINVAL; |
| |
| switch (len) { |
| case 1: |
| val = ENABLE_ONE_BYTE; |
| break; |
| case 2: |
| val = ENABLE_TWE_BYTE; |
| break; |
| case 3: |
| val = ENABLE_THREE_BYTE; |
| break; |
| case 4: |
| val = ENABLE_FOUR_BYTE; |
| break; |
| default: |
| val = 0xFF; /* invalid option */ |
| } |
| |
| if (val == 0xFF) |
| return -EINVAL; |
| |
| ret = __usb_control_msg(dev, pipe, req, |
| USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| val, reg, buf, len, HZ); |
| return ret; |
| } |
| |
| int cx231xx_send_vendor_cmd(struct cx231xx *dev, |
| struct VENDOR_REQUEST_IN *ven_req) |
| { |
| int ret; |
| int pipe = 0; |
| int unsend_size = 0; |
| u8 *pdata; |
| |
| if (dev->state & DEV_DISCONNECTED) |
| return -ENODEV; |
| |
| if ((ven_req->wLength > URB_MAX_CTRL_SIZE)) |
| return -EINVAL; |
| |
| if (ven_req->direction) |
| pipe = usb_rcvctrlpipe(dev->udev, 0); |
| else |
| pipe = usb_sndctrlpipe(dev->udev, 0); |
| |
| /* |
| * If the cx23102 read more than 4 bytes with i2c bus, |
| * need chop to 4 byte per request |
| */ |
| if ((ven_req->wLength > 4) && ((ven_req->bRequest == 0x4) || |
| (ven_req->bRequest == 0x5) || |
| (ven_req->bRequest == 0x6) || |
| |
| /* Internal Master 3 Bus can send |
| * and receive only 4 bytes per time |
| */ |
| (ven_req->bRequest == 0x2))) { |
| unsend_size = 0; |
| pdata = ven_req->pBuff; |
| |
| |
| unsend_size = ven_req->wLength; |
| |
| /* the first package */ |
| ven_req->wValue = ven_req->wValue & 0xFFFB; |
| ven_req->wValue = (ven_req->wValue & 0xFFBD) | 0x2; |
| ret = __usb_control_msg(dev, pipe, ven_req->bRequest, |
| ven_req->direction | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| ven_req->wValue, ven_req->wIndex, pdata, |
| 0x0004, HZ); |
| unsend_size = unsend_size - 4; |
| |
| /* the middle package */ |
| ven_req->wValue = (ven_req->wValue & 0xFFBD) | 0x42; |
| while (unsend_size - 4 > 0) { |
| pdata = pdata + 4; |
| ret = __usb_control_msg(dev, pipe, |
| ven_req->bRequest, |
| ven_req->direction | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| ven_req->wValue, ven_req->wIndex, pdata, |
| 0x0004, HZ); |
| unsend_size = unsend_size - 4; |
| } |
| |
| /* the last package */ |
| ven_req->wValue = (ven_req->wValue & 0xFFBD) | 0x40; |
| pdata = pdata + 4; |
| ret = __usb_control_msg(dev, pipe, ven_req->bRequest, |
| ven_req->direction | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| ven_req->wValue, ven_req->wIndex, pdata, |
| unsend_size, HZ); |
| } else { |
| ret = __usb_control_msg(dev, pipe, ven_req->bRequest, |
| ven_req->direction | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| ven_req->wValue, ven_req->wIndex, |
| ven_req->pBuff, ven_req->wLength, HZ); |
| } |
| |
| return ret; |
| } |
| |
| /* |
| * cx231xx_write_ctrl_reg() |
| * sends data to the usb device, specifying bRequest |
| */ |
| int cx231xx_write_ctrl_reg(struct cx231xx *dev, u8 req, u16 reg, char *buf, |
| int len) |
| { |
| u8 val = 0; |
| int ret; |
| int pipe = usb_sndctrlpipe(dev->udev, 0); |
| |
| if (dev->state & DEV_DISCONNECTED) |
| return -ENODEV; |
| |
| if ((len < 1) || (len > URB_MAX_CTRL_SIZE)) |
| return -EINVAL; |
| |
| switch (len) { |
| case 1: |
| val = ENABLE_ONE_BYTE; |
| break; |
| case 2: |
| val = ENABLE_TWE_BYTE; |
| break; |
| case 3: |
| val = ENABLE_THREE_BYTE; |
| break; |
| case 4: |
| val = ENABLE_FOUR_BYTE; |
| break; |
| default: |
| val = 0xFF; /* invalid option */ |
| } |
| |
| if (val == 0xFF) |
| return -EINVAL; |
| |
| if (reg_debug) { |
| int byte; |
| |
| cx231xx_isocdbg("(pipe 0x%08x): OUT: %02x %02x %02x %02x %02x %02x %02x %02x >>>", |
| pipe, |
| USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| req, 0, val, reg & 0xff, |
| reg >> 8, len & 0xff, len >> 8); |
| |
| for (byte = 0; byte < len; byte++) |
| cx231xx_isocdbg(" %02x", (unsigned char)buf[byte]); |
| cx231xx_isocdbg("\n"); |
| } |
| |
| ret = __usb_control_msg(dev, pipe, req, |
| USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| val, reg, buf, len, HZ); |
| |
| return ret; |
| } |
| |
| /**************************************************************** |
| * USB Alternate Setting functions * |
| *****************************************************************/ |
| |
| int cx231xx_set_video_alternate(struct cx231xx *dev) |
| { |
| int errCode, prev_alt = dev->video_mode.alt; |
| unsigned int min_pkt_size = dev->width * 2 + 4; |
| u32 usb_interface_index = 0; |
| |
| /* When image size is bigger than a certain value, |
| the frame size should be increased, otherwise, only |
| green screen will be received. |
| */ |
| if (dev->width * 2 * dev->height > 720 * 240 * 2) |
| min_pkt_size *= 2; |
| |
| if (dev->width > 360) { |
| /* resolutions: 720,704,640 */ |
| dev->video_mode.alt = 3; |
| } else if (dev->width > 180) { |
| /* resolutions: 360,352,320,240 */ |
| dev->video_mode.alt = 2; |
| } else if (dev->width > 0) { |
| /* resolutions: 180,176,160,128,88 */ |
| dev->video_mode.alt = 1; |
| } else { |
| /* Change to alt0 BULK to release USB bandwidth */ |
| dev->video_mode.alt = 0; |
| } |
| |
| if (dev->USE_ISO == 0) |
| dev->video_mode.alt = 0; |
| |
| cx231xx_coredbg("dev->video_mode.alt= %d\n", dev->video_mode.alt); |
| |
| /* Get the correct video interface Index */ |
| usb_interface_index = |
| dev->current_pcb_config.hs_config_info[0].interface_info. |
| video_index + 1; |
| |
| if (dev->video_mode.alt != prev_alt) { |
| cx231xx_coredbg("minimum isoc packet size: %u (alt=%d)\n", |
| min_pkt_size, dev->video_mode.alt); |
| |
| if (dev->video_mode.alt_max_pkt_size != NULL) |
| dev->video_mode.max_pkt_size = |
| dev->video_mode.alt_max_pkt_size[dev->video_mode.alt]; |
| cx231xx_coredbg("setting alternate %d with wMaxPacketSize=%u\n", |
| dev->video_mode.alt, |
| dev->video_mode.max_pkt_size); |
| errCode = |
| usb_set_interface(dev->udev, usb_interface_index, |
| dev->video_mode.alt); |
| if (errCode < 0) { |
| dev_err(dev->dev, |
| "cannot change alt number to %d (error=%i)\n", |
| dev->video_mode.alt, errCode); |
| return errCode; |
| } |
| } |
| return 0; |
| } |
| |
| int cx231xx_set_alt_setting(struct cx231xx *dev, u8 index, u8 alt) |
| { |
| int status = 0; |
| u32 usb_interface_index = 0; |
| u32 max_pkt_size = 0; |
| |
| switch (index) { |
| case INDEX_TS1: |
| usb_interface_index = |
| dev->current_pcb_config.hs_config_info[0].interface_info. |
| ts1_index + 1; |
| dev->ts1_mode.alt = alt; |
| if (dev->ts1_mode.alt_max_pkt_size != NULL) |
| max_pkt_size = dev->ts1_mode.max_pkt_size = |
| dev->ts1_mode.alt_max_pkt_size[dev->ts1_mode.alt]; |
| break; |
| case INDEX_TS2: |
| usb_interface_index = |
| dev->current_pcb_config.hs_config_info[0].interface_info. |
| ts2_index + 1; |
| break; |
| case INDEX_AUDIO: |
| usb_interface_index = |
| dev->current_pcb_config.hs_config_info[0].interface_info. |
| audio_index + 1; |
| dev->adev.alt = alt; |
| if (dev->adev.alt_max_pkt_size != NULL) |
| max_pkt_size = dev->adev.max_pkt_size = |
| dev->adev.alt_max_pkt_size[dev->adev.alt]; |
| break; |
| case INDEX_VIDEO: |
| usb_interface_index = |
| dev->current_pcb_config.hs_config_info[0].interface_info. |
| video_index + 1; |
| dev->video_mode.alt = alt; |
| if (dev->video_mode.alt_max_pkt_size != NULL) |
| max_pkt_size = dev->video_mode.max_pkt_size = |
| dev->video_mode.alt_max_pkt_size[dev->video_mode. |
| alt]; |
| break; |
| case INDEX_VANC: |
| if (dev->board.no_alt_vanc) |
| return 0; |
| usb_interface_index = |
| dev->current_pcb_config.hs_config_info[0].interface_info. |
| vanc_index + 1; |
| dev->vbi_mode.alt = alt; |
| if (dev->vbi_mode.alt_max_pkt_size != NULL) |
| max_pkt_size = dev->vbi_mode.max_pkt_size = |
| dev->vbi_mode.alt_max_pkt_size[dev->vbi_mode.alt]; |
| break; |
| case INDEX_HANC: |
| usb_interface_index = |
| dev->current_pcb_config.hs_config_info[0].interface_info. |
| hanc_index + 1; |
| dev->sliced_cc_mode.alt = alt; |
| if (dev->sliced_cc_mode.alt_max_pkt_size != NULL) |
| max_pkt_size = dev->sliced_cc_mode.max_pkt_size = |
| dev->sliced_cc_mode.alt_max_pkt_size[dev-> |
| sliced_cc_mode. |
| alt]; |
| break; |
| default: |
| break; |
| } |
| |
| if (alt > 0 && max_pkt_size == 0) { |
| dev_err(dev->dev, |
| "can't change interface %d alt no. to %d: Max. Pkt size = 0\n", |
| usb_interface_index, alt); |
| /*To workaround error number=-71 on EP0 for videograbber, |
| need add following codes.*/ |
| if (dev->board.no_alt_vanc) |
| return -1; |
| } |
| |
| cx231xx_coredbg("setting alternate %d with wMaxPacketSize=%u,Interface = %d\n", |
| alt, max_pkt_size, |
| usb_interface_index); |
| |
| if (usb_interface_index > 0) { |
| status = usb_set_interface(dev->udev, usb_interface_index, alt); |
| if (status < 0) { |
| dev_err(dev->dev, |
| "can't change interface %d alt no. to %d (err=%i)\n", |
| usb_interface_index, alt, status); |
| return status; |
| } |
| } |
| |
| return status; |
| } |
| EXPORT_SYMBOL_GPL(cx231xx_set_alt_setting); |
| |
| int cx231xx_gpio_set(struct cx231xx *dev, struct cx231xx_reg_seq *gpio) |
| { |
| int rc = 0; |
| |
| if (!gpio) |
| return rc; |
| |
| /* Send GPIO reset sequences specified at board entry */ |
| while (gpio->sleep >= 0) { |
| rc = cx231xx_set_gpio_value(dev, gpio->bit, gpio->val); |
| if (rc < 0) |
| return rc; |
| |
| if (gpio->sleep > 0) |
| msleep(gpio->sleep); |
| |
| gpio++; |
| } |
| return rc; |
| } |
| |
| int cx231xx_demod_reset(struct cx231xx *dev) |
| { |
| |
| u8 status = 0; |
| u8 value[4] = { 0, 0, 0, 0 }; |
| |
| status = cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, PWR_CTL_EN, |
| value, 4); |
| |
| cx231xx_coredbg("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", PWR_CTL_EN, |
| value[0], value[1], value[2], value[3]); |
| |
| cx231xx_coredbg("Enter cx231xx_demod_reset()\n"); |
| |
| value[1] = (u8) 0x3; |
| status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, |
| PWR_CTL_EN, value, 4); |
| msleep(10); |
| |
| value[1] = (u8) 0x0; |
| status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, |
| PWR_CTL_EN, value, 4); |
| msleep(10); |
| |
| value[1] = (u8) 0x3; |
| status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, |
| PWR_CTL_EN, value, 4); |
| msleep(10); |
| |
| status = cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, PWR_CTL_EN, |
| value, 4); |
| |
| cx231xx_coredbg("reg0x%x=0x%x 0x%x 0x%x 0x%x\n", PWR_CTL_EN, |
| value[0], value[1], value[2], value[3]); |
| |
| return status; |
| } |
| EXPORT_SYMBOL_GPL(cx231xx_demod_reset); |
| int is_fw_load(struct cx231xx *dev) |
| { |
| return cx231xx_check_fw(dev); |
| } |
| EXPORT_SYMBOL_GPL(is_fw_load); |
| |
| int cx231xx_set_mode(struct cx231xx *dev, enum cx231xx_mode set_mode) |
| { |
| int errCode = 0; |
| |
| if (dev->mode == set_mode) |
| return 0; |
| |
| if (set_mode == CX231XX_SUSPEND) { |
| /* Set the chip in power saving mode */ |
| dev->mode = set_mode; |
| } |
| |
| /* Resource is locked */ |
| if (dev->mode != CX231XX_SUSPEND) |
| return -EINVAL; |
| |
| dev->mode = set_mode; |
| |
| if (dev->mode == CX231XX_DIGITAL_MODE)/* Set Digital power mode */ { |
| /* set AGC mode to Digital */ |
| switch (dev->model) { |
| case CX231XX_BOARD_CNXT_CARRAERA: |
| case CX231XX_BOARD_CNXT_RDE_250: |
| case CX231XX_BOARD_CNXT_SHELBY: |
| case CX231XX_BOARD_CNXT_RDU_250: |
| errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 0); |
| break; |
| case CX231XX_BOARD_CNXT_RDE_253S: |
| case CX231XX_BOARD_CNXT_RDU_253S: |
| case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID: |
| errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 1); |
| break; |
| case CX231XX_BOARD_HAUPPAUGE_EXETER: |
| case CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx: |
| errCode = cx231xx_set_power_mode(dev, |
| POLARIS_AVMODE_DIGITAL); |
| break; |
| default: |
| break; |
| } |
| } else/* Set Analog Power mode */ { |
| /* set AGC mode to Analog */ |
| switch (dev->model) { |
| case CX231XX_BOARD_CNXT_CARRAERA: |
| case CX231XX_BOARD_CNXT_RDE_250: |
| case CX231XX_BOARD_CNXT_SHELBY: |
| case CX231XX_BOARD_CNXT_RDU_250: |
| errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 1); |
| break; |
| case CX231XX_BOARD_CNXT_RDE_253S: |
| case CX231XX_BOARD_CNXT_RDU_253S: |
| case CX231XX_BOARD_HAUPPAUGE_EXETER: |
| case CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx: |
| case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID: |
| case CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL: |
| case CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC: |
| errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 0); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| if (errCode < 0) { |
| dev_err(dev->dev, "Failed to set devmode to %s: error: %i", |
| dev->mode == CX231XX_DIGITAL_MODE ? "digital" : "analog", |
| errCode); |
| return errCode; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(cx231xx_set_mode); |
| |
| int cx231xx_ep5_bulkout(struct cx231xx *dev, u8 *firmware, u16 size) |
| { |
| int errCode = 0; |
| int actlen = -1; |
| int ret = -ENOMEM; |
| u32 *buffer; |
| |
| buffer = kzalloc(4096, GFP_KERNEL); |
| if (buffer == NULL) |
| return -ENOMEM; |
| memcpy(&buffer[0], firmware, 4096); |
| |
| ret = usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, 5), |
| buffer, 4096, &actlen, 2000); |
| |
| if (ret) |
| dev_err(dev->dev, |
| "bulk message failed: %d (%d/%d)", ret, |
| size, actlen); |
| else { |
| errCode = actlen != size ? -1 : 0; |
| } |
| kfree(buffer); |
| return errCode; |
| } |
| |
| /***************************************************************** |
| * URB Streaming functions * |
| ******************************************************************/ |
| |
| /* |
| * IRQ callback, called by URB callback |
| */ |
| static void cx231xx_isoc_irq_callback(struct urb *urb) |
| { |
| struct cx231xx_dmaqueue *dma_q = urb->context; |
| struct cx231xx_video_mode *vmode = |
| container_of(dma_q, struct cx231xx_video_mode, vidq); |
| struct cx231xx *dev = container_of(vmode, struct cx231xx, video_mode); |
| unsigned long flags; |
| int i; |
| |
| switch (urb->status) { |
| case 0: /* success */ |
| case -ETIMEDOUT: /* NAK */ |
| break; |
| case -ECONNRESET: /* kill */ |
| case -ENOENT: |
| case -ESHUTDOWN: |
| return; |
| default: /* error */ |
| cx231xx_isocdbg("urb completion error %d.\n", urb->status); |
| break; |
| } |
| |
| /* Copy data from URB */ |
| spin_lock_irqsave(&dev->video_mode.slock, flags); |
| dev->video_mode.isoc_ctl.isoc_copy(dev, urb); |
| spin_unlock_irqrestore(&dev->video_mode.slock, flags); |
| |
| /* Reset urb buffers */ |
| for (i = 0; i < urb->number_of_packets; i++) { |
| urb->iso_frame_desc[i].status = 0; |
| urb->iso_frame_desc[i].actual_length = 0; |
| } |
| |
| urb->status = usb_submit_urb(urb, GFP_ATOMIC); |
| if (urb->status) { |
| cx231xx_isocdbg("urb resubmit failed (error=%i)\n", |
| urb->status); |
| } |
| } |
| /***************************************************************** |
| * URB Streaming functions * |
| ******************************************************************/ |
| |
| /* |
| * IRQ callback, called by URB callback |
| */ |
| static void cx231xx_bulk_irq_callback(struct urb *urb) |
| { |
| struct cx231xx_dmaqueue *dma_q = urb->context; |
| struct cx231xx_video_mode *vmode = |
| container_of(dma_q, struct cx231xx_video_mode, vidq); |
| struct cx231xx *dev = container_of(vmode, struct cx231xx, video_mode); |
| unsigned long flags; |
| |
| switch (urb->status) { |
| case 0: /* success */ |
| case -ETIMEDOUT: /* NAK */ |
| break; |
| case -ECONNRESET: /* kill */ |
| case -ENOENT: |
| case -ESHUTDOWN: |
| return; |
| case -EPIPE: /* stall */ |
| cx231xx_isocdbg("urb completion error - device is stalled.\n"); |
| return; |
| default: /* error */ |
| cx231xx_isocdbg("urb completion error %d.\n", urb->status); |
| break; |
| } |
| |
| /* Copy data from URB */ |
| spin_lock_irqsave(&dev->video_mode.slock, flags); |
| dev->video_mode.bulk_ctl.bulk_copy(dev, urb); |
| spin_unlock_irqrestore(&dev->video_mode.slock, flags); |
| |
| /* Reset urb buffers */ |
| urb->status = usb_submit_urb(urb, GFP_ATOMIC); |
| if (urb->status) { |
| cx231xx_isocdbg("urb resubmit failed (error=%i)\n", |
| urb->status); |
| } |
| } |
| /* |
| * Stop and Deallocate URBs |
| */ |
| void cx231xx_uninit_isoc(struct cx231xx *dev) |
| { |
| struct cx231xx_dmaqueue *dma_q = &dev->video_mode.vidq; |
| struct urb *urb; |
| int i; |
| bool broken_pipe = false; |
| |
| cx231xx_isocdbg("cx231xx: called cx231xx_uninit_isoc\n"); |
| |
| dev->video_mode.isoc_ctl.nfields = -1; |
| for (i = 0; i < dev->video_mode.isoc_ctl.num_bufs; i++) { |
| urb = dev->video_mode.isoc_ctl.urb[i]; |
| if (urb) { |
| if (!irqs_disabled()) |
| usb_kill_urb(urb); |
| else |
| usb_unlink_urb(urb); |
| |
| if (dev->video_mode.isoc_ctl.transfer_buffer[i]) { |
| usb_free_coherent(dev->udev, |
| urb->transfer_buffer_length, |
| dev->video_mode.isoc_ctl. |
| transfer_buffer[i], |
| urb->transfer_dma); |
| } |
| if (urb->status == -EPIPE) { |
| broken_pipe = true; |
| } |
| usb_free_urb(urb); |
| dev->video_mode.isoc_ctl.urb[i] = NULL; |
| } |
| dev->video_mode.isoc_ctl.transfer_buffer[i] = NULL; |
| } |
| |
| if (broken_pipe) { |
| cx231xx_isocdbg("Reset endpoint to recover broken pipe."); |
| usb_reset_endpoint(dev->udev, dev->video_mode.end_point_addr); |
| } |
| kfree(dev->video_mode.isoc_ctl.urb); |
| kfree(dev->video_mode.isoc_ctl.transfer_buffer); |
| kfree(dma_q->p_left_data); |
| |
| dev->video_mode.isoc_ctl.urb = NULL; |
| dev->video_mode.isoc_ctl.transfer_buffer = NULL; |
| dev->video_mode.isoc_ctl.num_bufs = 0; |
| dma_q->p_left_data = NULL; |
| |
| if (dev->mode_tv == 0) |
| cx231xx_capture_start(dev, 0, Raw_Video); |
| else |
| cx231xx_capture_start(dev, 0, TS1_serial_mode); |
| |
| |
| } |
| EXPORT_SYMBOL_GPL(cx231xx_uninit_isoc); |
| |
| /* |
| * Stop and Deallocate URBs |
| */ |
| void cx231xx_uninit_bulk(struct cx231xx *dev) |
| { |
| struct cx231xx_dmaqueue *dma_q = &dev->video_mode.vidq; |
| struct urb *urb; |
| int i; |
| bool broken_pipe = false; |
| |
| cx231xx_isocdbg("cx231xx: called cx231xx_uninit_bulk\n"); |
| |
| dev->video_mode.bulk_ctl.nfields = -1; |
| for (i = 0; i < dev->video_mode.bulk_ctl.num_bufs; i++) { |
| urb = dev->video_mode.bulk_ctl.urb[i]; |
| if (urb) { |
| if (!irqs_disabled()) |
| usb_kill_urb(urb); |
| else |
| usb_unlink_urb(urb); |
| |
| if (dev->video_mode.bulk_ctl.transfer_buffer[i]) { |
| usb_free_coherent(dev->udev, |
| urb->transfer_buffer_length, |
| dev->video_mode.bulk_ctl. |
| transfer_buffer[i], |
| urb->transfer_dma); |
| } |
| if (urb->status == -EPIPE) { |
| broken_pipe = true; |
| } |
| usb_free_urb(urb); |
| dev->video_mode.bulk_ctl.urb[i] = NULL; |
| } |
| dev->video_mode.bulk_ctl.transfer_buffer[i] = NULL; |
| } |
| |
| if (broken_pipe) { |
| cx231xx_isocdbg("Reset endpoint to recover broken pipe."); |
| usb_reset_endpoint(dev->udev, dev->video_mode.end_point_addr); |
| } |
| kfree(dev->video_mode.bulk_ctl.urb); |
| kfree(dev->video_mode.bulk_ctl.transfer_buffer); |
| kfree(dma_q->p_left_data); |
| |
| dev->video_mode.bulk_ctl.urb = NULL; |
| dev->video_mode.bulk_ctl.transfer_buffer = NULL; |
| dev->video_mode.bulk_ctl.num_bufs = 0; |
| dma_q->p_left_data = NULL; |
| |
| if (dev->mode_tv == 0) |
| cx231xx_capture_start(dev, 0, Raw_Video); |
| else |
| cx231xx_capture_start(dev, 0, TS1_serial_mode); |
| |
| |
| } |
| EXPORT_SYMBOL_GPL(cx231xx_uninit_bulk); |
| |
| /* |
| * Allocate URBs and start IRQ |
| */ |
| int cx231xx_init_isoc(struct cx231xx *dev, int max_packets, |
| int num_bufs, int max_pkt_size, |
| int (*isoc_copy) (struct cx231xx *dev, struct urb *urb)) |
| { |
| struct cx231xx_dmaqueue *dma_q = &dev->video_mode.vidq; |
| int i; |
| int sb_size, pipe; |
| struct urb *urb; |
| int j, k; |
| int rc; |
| |
| /* De-allocates all pending stuff */ |
| cx231xx_uninit_isoc(dev); |
| |
| dma_q->p_left_data = kzalloc(4096, GFP_KERNEL); |
| if (dma_q->p_left_data == NULL) |
| return -ENOMEM; |
| |
| dev->video_mode.isoc_ctl.isoc_copy = isoc_copy; |
| dev->video_mode.isoc_ctl.num_bufs = num_bufs; |
| dma_q->pos = 0; |
| dma_q->is_partial_line = 0; |
| dma_q->last_sav = 0; |
| dma_q->current_field = -1; |
| dma_q->field1_done = 0; |
| dma_q->lines_per_field = dev->height / 2; |
| dma_q->bytes_left_in_line = dev->width << 1; |
| dma_q->lines_completed = 0; |
| dma_q->mpeg_buffer_done = 0; |
| dma_q->left_data_count = 0; |
| dma_q->mpeg_buffer_completed = 0; |
| dma_q->add_ps_package_head = CX231XX_NEED_ADD_PS_PACKAGE_HEAD; |
| dma_q->ps_head[0] = 0x00; |
| dma_q->ps_head[1] = 0x00; |
| dma_q->ps_head[2] = 0x01; |
| dma_q->ps_head[3] = 0xBA; |
| for (i = 0; i < 8; i++) |
| dma_q->partial_buf[i] = 0; |
| |
| dev->video_mode.isoc_ctl.urb = |
| kcalloc(num_bufs, sizeof(void *), GFP_KERNEL); |
| if (!dev->video_mode.isoc_ctl.urb) { |
| dev_err(dev->dev, |
| "cannot alloc memory for usb buffers\n"); |
| return -ENOMEM; |
| } |
| |
| dev->video_mode.isoc_ctl.transfer_buffer = |
| kcalloc(num_bufs, sizeof(void *), GFP_KERNEL); |
| if (!dev->video_mode.isoc_ctl.transfer_buffer) { |
| dev_err(dev->dev, |
| "cannot allocate memory for usbtransfer\n"); |
| kfree(dev->video_mode.isoc_ctl.urb); |
| return -ENOMEM; |
| } |
| |
| dev->video_mode.isoc_ctl.max_pkt_size = max_pkt_size; |
| dev->video_mode.isoc_ctl.buf = NULL; |
| |
| sb_size = max_packets * dev->video_mode.isoc_ctl.max_pkt_size; |
| |
| if (dev->mode_tv == 1) |
| dev->video_mode.end_point_addr = 0x81; |
| else |
| dev->video_mode.end_point_addr = 0x84; |
| |
| |
| /* allocate urbs and transfer buffers */ |
| for (i = 0; i < dev->video_mode.isoc_ctl.num_bufs; i++) { |
| urb = usb_alloc_urb(max_packets, GFP_KERNEL); |
| if (!urb) { |
| cx231xx_uninit_isoc(dev); |
| return -ENOMEM; |
| } |
| dev->video_mode.isoc_ctl.urb[i] = urb; |
| |
| dev->video_mode.isoc_ctl.transfer_buffer[i] = |
| usb_alloc_coherent(dev->udev, sb_size, GFP_KERNEL, |
| &urb->transfer_dma); |
| if (!dev->video_mode.isoc_ctl.transfer_buffer[i]) { |
| dev_err(dev->dev, |
| "unable to allocate %i bytes for transfer buffer %i%s\n", |
| sb_size, i, |
| in_interrupt() ? " while in int" : ""); |
| cx231xx_uninit_isoc(dev); |
| return -ENOMEM; |
| } |
| memset(dev->video_mode.isoc_ctl.transfer_buffer[i], 0, sb_size); |
| |
| pipe = |
| usb_rcvisocpipe(dev->udev, dev->video_mode.end_point_addr); |
| |
| usb_fill_int_urb(urb, dev->udev, pipe, |
| dev->video_mode.isoc_ctl.transfer_buffer[i], |
| sb_size, cx231xx_isoc_irq_callback, dma_q, 1); |
| |
| urb->number_of_packets = max_packets; |
| urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP; |
| |
| k = 0; |
| for (j = 0; j < max_packets; j++) { |
| urb->iso_frame_desc[j].offset = k; |
| urb->iso_frame_desc[j].length = |
| dev->video_mode.isoc_ctl.max_pkt_size; |
| k += dev->video_mode.isoc_ctl.max_pkt_size; |
| } |
| } |
| |
| init_waitqueue_head(&dma_q->wq); |
| |
| /* submit urbs and enables IRQ */ |
| for (i = 0; i < dev->video_mode.isoc_ctl.num_bufs; i++) { |
| rc = usb_submit_urb(dev->video_mode.isoc_ctl.urb[i], |
| GFP_ATOMIC); |
| if (rc) { |
| dev_err(dev->dev, |
| "submit of urb %i failed (error=%i)\n", i, |
| rc); |
| cx231xx_uninit_isoc(dev); |
| return rc; |
| } |
| } |
| |
| if (dev->mode_tv == 0) |
| cx231xx_capture_start(dev, 1, Raw_Video); |
| else |
| cx231xx_capture_start(dev, 1, TS1_serial_mode); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(cx231xx_init_isoc); |
| |
| /* |
| * Allocate URBs and start IRQ |
| */ |
| int cx231xx_init_bulk(struct cx231xx *dev, int max_packets, |
| int num_bufs, int max_pkt_size, |
| int (*bulk_copy) (struct cx231xx *dev, struct urb *urb)) |
| { |
| struct cx231xx_dmaqueue *dma_q = &dev->video_mode.vidq; |
| int i; |
| int sb_size, pipe; |
| struct urb *urb; |
| int rc; |
| |
| dev->video_input = dev->video_input > 2 ? 2 : dev->video_input; |
| |
| cx231xx_coredbg("Setting Video mux to %d\n", dev->video_input); |
| |
| video_mux(dev, dev->video_input); |
| |
| /* De-allocates all pending stuff */ |
| cx231xx_uninit_bulk(dev); |
| |
| dev->video_mode.bulk_ctl.bulk_copy = bulk_copy; |
| dev->video_mode.bulk_ctl.num_bufs = num_bufs; |
| dma_q->pos = 0; |
| dma_q->is_partial_line = 0; |
| dma_q->last_sav = 0; |
| dma_q->current_field = -1; |
| dma_q->field1_done = 0; |
| dma_q->lines_per_field = dev->height / 2; |
| dma_q->bytes_left_in_line = dev->width << 1; |
| dma_q->lines_completed = 0; |
| dma_q->mpeg_buffer_done = 0; |
| dma_q->left_data_count = 0; |
| dma_q->mpeg_buffer_completed = 0; |
| dma_q->ps_head[0] = 0x00; |
| dma_q->ps_head[1] = 0x00; |
| dma_q->ps_head[2] = 0x01; |
| dma_q->ps_head[3] = 0xBA; |
| for (i = 0; i < 8; i++) |
| dma_q->partial_buf[i] = 0; |
| |
| dev->video_mode.bulk_ctl.urb = |
| kcalloc(num_bufs, sizeof(void *), GFP_KERNEL); |
| if (!dev->video_mode.bulk_ctl.urb) { |
| dev_err(dev->dev, |
| "cannot alloc memory for usb buffers\n"); |
| return -ENOMEM; |
| } |
| |
| dev->video_mode.bulk_ctl.transfer_buffer = |
| kcalloc(num_bufs, sizeof(void *), GFP_KERNEL); |
| if (!dev->video_mode.bulk_ctl.transfer_buffer) { |
| dev_err(dev->dev, |
| "cannot allocate memory for usbtransfer\n"); |
| kfree(dev->video_mode.bulk_ctl.urb); |
| return -ENOMEM; |
| } |
| |
| dev->video_mode.bulk_ctl.max_pkt_size = max_pkt_size; |
| dev->video_mode.bulk_ctl.buf = NULL; |
| |
| sb_size = max_packets * dev->video_mode.bulk_ctl.max_pkt_size; |
| |
| if (dev->mode_tv == 1) |
| dev->video_mode.end_point_addr = 0x81; |
| else |
| dev->video_mode.end_point_addr = 0x84; |
| |
| |
| /* allocate urbs and transfer buffers */ |
| for (i = 0; i < dev->video_mode.bulk_ctl.num_bufs; i++) { |
| urb = usb_alloc_urb(0, GFP_KERNEL); |
| if (!urb) { |
| cx231xx_uninit_bulk(dev); |
| return -ENOMEM; |
| } |
| dev->video_mode.bulk_ctl.urb[i] = urb; |
| urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP; |
| |
| dev->video_mode.bulk_ctl.transfer_buffer[i] = |
| usb_alloc_coherent(dev->udev, sb_size, GFP_KERNEL, |
| &urb->transfer_dma); |
| if (!dev->video_mode.bulk_ctl.transfer_buffer[i]) { |
| dev_err(dev->dev, |
| "unable to allocate %i bytes for transfer buffer %i%s\n", |
| sb_size, i, |
| in_interrupt() ? " while in int" : ""); |
| cx231xx_uninit_bulk(dev); |
| return -ENOMEM; |
| } |
| memset(dev->video_mode.bulk_ctl.transfer_buffer[i], 0, sb_size); |
| |
| pipe = usb_rcvbulkpipe(dev->udev, |
| dev->video_mode.end_point_addr); |
| usb_fill_bulk_urb(urb, dev->udev, pipe, |
| dev->video_mode.bulk_ctl.transfer_buffer[i], |
| sb_size, cx231xx_bulk_irq_callback, dma_q); |
| } |
| |
| /* clear halt */ |
| rc = usb_clear_halt(dev->udev, dev->video_mode.bulk_ctl.urb[0]->pipe); |
| if (rc < 0) { |
| dev_err(dev->dev, |
| "failed to clear USB bulk endpoint stall/halt condition (error=%i)\n", |
| rc); |
| cx231xx_uninit_bulk(dev); |
| return rc; |
| } |
| |
| init_waitqueue_head(&dma_q->wq); |
| |
| /* submit urbs and enables IRQ */ |
| for (i = 0; i < dev->video_mode.bulk_ctl.num_bufs; i++) { |
| rc = usb_submit_urb(dev->video_mode.bulk_ctl.urb[i], |
| GFP_ATOMIC); |
| if (rc) { |
| dev_err(dev->dev, |
| "submit of urb %i failed (error=%i)\n", i, rc); |
| cx231xx_uninit_bulk(dev); |
| return rc; |
| } |
| } |
| |
| if (dev->mode_tv == 0) |
| cx231xx_capture_start(dev, 1, Raw_Video); |
| else |
| cx231xx_capture_start(dev, 1, TS1_serial_mode); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(cx231xx_init_bulk); |
| void cx231xx_stop_TS1(struct cx231xx *dev) |
| { |
| u8 val[4] = { 0, 0, 0, 0 }; |
| |
| val[0] = 0x00; |
| val[1] = 0x03; |
| val[2] = 0x00; |
| val[3] = 0x00; |
| cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, |
| TS_MODE_REG, val, 4); |
| |
| val[0] = 0x00; |
| val[1] = 0x70; |
| val[2] = 0x04; |
| val[3] = 0x00; |
| cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, |
| TS1_CFG_REG, val, 4); |
| } |
| /* EXPORT_SYMBOL_GPL(cx231xx_stop_TS1); */ |
| void cx231xx_start_TS1(struct cx231xx *dev) |
| { |
| u8 val[4] = { 0, 0, 0, 0 }; |
| |
| val[0] = 0x03; |
| val[1] = 0x03; |
| val[2] = 0x00; |
| val[3] = 0x00; |
| cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, |
| TS_MODE_REG, val, 4); |
| |
| val[0] = 0x04; |
| val[1] = 0xA3; |
| val[2] = 0x3B; |
| val[3] = 0x00; |
| cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, |
| TS1_CFG_REG, val, 4); |
| } |
| /* EXPORT_SYMBOL_GPL(cx231xx_start_TS1); */ |
| /***************************************************************** |
| * Device Init/UnInit functions * |
| ******************************************************************/ |
| int cx231xx_dev_init(struct cx231xx *dev) |
| { |
| int errCode = 0; |
| |
| /* Initialize I2C bus */ |
| |
| /* External Master 1 Bus */ |
| dev->i2c_bus[0].nr = 0; |
| dev->i2c_bus[0].dev = dev; |
| dev->i2c_bus[0].i2c_period = I2C_SPEED_100K; /* 100 KHz */ |
| dev->i2c_bus[0].i2c_nostop = 0; |
| dev->i2c_bus[0].i2c_reserve = 0; |
| dev->i2c_bus[0].i2c_rc = -ENODEV; |
| |
| /* External Master 2 Bus */ |
| dev->i2c_bus[1].nr = 1; |
| dev->i2c_bus[1].dev = dev; |
| dev->i2c_bus[1].i2c_period = I2C_SPEED_100K; /* 100 KHz */ |
| dev->i2c_bus[1].i2c_nostop = 0; |
| dev->i2c_bus[1].i2c_reserve = 0; |
| dev->i2c_bus[1].i2c_rc = -ENODEV; |
| |
| /* Internal Master 3 Bus */ |
| dev->i2c_bus[2].nr = 2; |
| dev->i2c_bus[2].dev = dev; |
| dev->i2c_bus[2].i2c_period = I2C_SPEED_100K; /* 100kHz */ |
| dev->i2c_bus[2].i2c_nostop = 0; |
| dev->i2c_bus[2].i2c_reserve = 0; |
| dev->i2c_bus[2].i2c_rc = -ENODEV; |
| |
| /* register I2C buses */ |
| errCode = cx231xx_i2c_register(&dev->i2c_bus[0]); |
| if (errCode < 0) |
| return errCode; |
| errCode = cx231xx_i2c_register(&dev->i2c_bus[1]); |
| if (errCode < 0) |
| return errCode; |
| errCode = cx231xx_i2c_register(&dev->i2c_bus[2]); |
| if (errCode < 0) |
| return errCode; |
| |
| errCode = cx231xx_i2c_mux_create(dev); |
| if (errCode < 0) { |
| dev_err(dev->dev, |
| "%s: Failed to create I2C mux\n", __func__); |
| return errCode; |
| } |
| errCode = cx231xx_i2c_mux_register(dev, 0); |
| if (errCode < 0) |
| return errCode; |
| |
| errCode = cx231xx_i2c_mux_register(dev, 1); |
| if (errCode < 0) |
| return errCode; |
| |
| /* scan the real bus segments in the order of physical port numbers */ |
| cx231xx_do_i2c_scan(dev, I2C_0); |
| cx231xx_do_i2c_scan(dev, I2C_1_MUX_1); |
| cx231xx_do_i2c_scan(dev, I2C_2); |
| cx231xx_do_i2c_scan(dev, I2C_1_MUX_3); |
| |
| /* init hardware */ |
| /* Note : with out calling set power mode function, |
| afe can not be set up correctly */ |
| if (dev->board.external_av) { |
| errCode = cx231xx_set_power_mode(dev, |
| POLARIS_AVMODE_ENXTERNAL_AV); |
| if (errCode < 0) { |
| dev_err(dev->dev, |
| "%s: Failed to set Power - errCode [%d]!\n", |
| __func__, errCode); |
| return errCode; |
| } |
| } else { |
| errCode = cx231xx_set_power_mode(dev, |
| POLARIS_AVMODE_ANALOGT_TV); |
| if (errCode < 0) { |
| dev_err(dev->dev, |
| "%s: Failed to set Power - errCode [%d]!\n", |
| __func__, errCode); |
| return errCode; |
| } |
| } |
| |
| /* reset the Tuner, if it is a Xceive tuner */ |
| if ((dev->board.tuner_type == TUNER_XC5000) || |
| (dev->board.tuner_type == TUNER_XC2028)) |
| cx231xx_gpio_set(dev, dev->board.tuner_gpio); |
| |
| /* initialize Colibri block */ |
| errCode = cx231xx_afe_init_super_block(dev, 0x23c); |
| if (errCode < 0) { |
| dev_err(dev->dev, |
| "%s: cx231xx_afe init super block - errCode [%d]!\n", |
| __func__, errCode); |
| return errCode; |
| } |
| errCode = cx231xx_afe_init_channels(dev); |
| if (errCode < 0) { |
| dev_err(dev->dev, |
| "%s: cx231xx_afe init channels - errCode [%d]!\n", |
| __func__, errCode); |
| return errCode; |
| } |
| |
| /* Set DIF in By pass mode */ |
| errCode = cx231xx_dif_set_standard(dev, DIF_USE_BASEBAND); |
| if (errCode < 0) { |
| dev_err(dev->dev, |
| "%s: cx231xx_dif set to By pass mode - errCode [%d]!\n", |
| __func__, errCode); |
| return errCode; |
| } |
| |
| /* I2S block related functions */ |
| errCode = cx231xx_i2s_blk_initialize(dev); |
| if (errCode < 0) { |
| dev_err(dev->dev, |
| "%s: cx231xx_i2s block initialize - errCode [%d]!\n", |
| __func__, errCode); |
| return errCode; |
| } |
| |
| /* init control pins */ |
| errCode = cx231xx_init_ctrl_pin_status(dev); |
| if (errCode < 0) { |
| dev_err(dev->dev, |
| "%s: cx231xx_init ctrl pins - errCode [%d]!\n", |
| __func__, errCode); |
| return errCode; |
| } |
| |
| /* set AGC mode to Analog */ |
| switch (dev->model) { |
| case CX231XX_BOARD_CNXT_CARRAERA: |
| case CX231XX_BOARD_CNXT_RDE_250: |
| case CX231XX_BOARD_CNXT_SHELBY: |
| case CX231XX_BOARD_CNXT_RDU_250: |
| errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 1); |
| break; |
| case CX231XX_BOARD_CNXT_RDE_253S: |
| case CX231XX_BOARD_CNXT_RDU_253S: |
| case CX231XX_BOARD_HAUPPAUGE_EXETER: |
| case CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx: |
| case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID: |
| case CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL: |
| case CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC: |
| errCode = cx231xx_set_agc_analog_digital_mux_select(dev, 0); |
| break; |
| default: |
| break; |
| } |
| if (errCode < 0) { |
| dev_err(dev->dev, |
| "%s: cx231xx_AGC mode to Analog - errCode [%d]!\n", |
| __func__, errCode); |
| return errCode; |
| } |
| |
| /* set all alternate settings to zero initially */ |
| cx231xx_set_alt_setting(dev, INDEX_VIDEO, 0); |
| cx231xx_set_alt_setting(dev, INDEX_VANC, 0); |
| cx231xx_set_alt_setting(dev, INDEX_HANC, 0); |
| if (dev->board.has_dvb) |
| cx231xx_set_alt_setting(dev, INDEX_TS1, 0); |
| |
| errCode = 0; |
| return errCode; |
| } |
| EXPORT_SYMBOL_GPL(cx231xx_dev_init); |
| |
| void cx231xx_dev_uninit(struct cx231xx *dev) |
| { |
| /* Un Initialize I2C bus */ |
| cx231xx_i2c_mux_unregister(dev); |
| cx231xx_i2c_unregister(&dev->i2c_bus[2]); |
| cx231xx_i2c_unregister(&dev->i2c_bus[1]); |
| cx231xx_i2c_unregister(&dev->i2c_bus[0]); |
| } |
| EXPORT_SYMBOL_GPL(cx231xx_dev_uninit); |
| |
| /***************************************************************** |
| * G P I O related functions * |
| ******************************************************************/ |
| int cx231xx_send_gpio_cmd(struct cx231xx *dev, u32 gpio_bit, u8 *gpio_val, |
| u8 len, u8 request, u8 direction) |
| { |
| int status = 0; |
| struct VENDOR_REQUEST_IN ven_req; |
| |
| /* Set wValue */ |
| ven_req.wValue = (u16) (gpio_bit >> 16 & 0xffff); |
| |
| /* set request */ |
| if (!request) { |
| if (direction) |
| ven_req.bRequest = VRT_GET_GPIO; /* 0x9 gpio */ |
| else |
| ven_req.bRequest = VRT_SET_GPIO; /* 0x8 gpio */ |
| } else { |
| if (direction) |
| ven_req.bRequest = VRT_GET_GPIE; /* 0xb gpie */ |
| else |
| ven_req.bRequest = VRT_SET_GPIE; /* 0xa gpie */ |
| } |
| |
| /* set index value */ |
| ven_req.wIndex = (u16) (gpio_bit & 0xffff); |
| |
| /* set wLength value */ |
| ven_req.wLength = len; |
| |
| /* set bData value */ |
| ven_req.bData = 0; |
| |
| /* set the buffer for read / write */ |
| ven_req.pBuff = gpio_val; |
| |
| /* set the direction */ |
| if (direction) { |
| ven_req.direction = USB_DIR_IN; |
| memset(ven_req.pBuff, 0x00, ven_req.wLength); |
| } else |
| ven_req.direction = USB_DIR_OUT; |
| |
| |
| /* call common vendor command request */ |
| status = cx231xx_send_vendor_cmd(dev, &ven_req); |
| if (status < 0) { |
| dev_err(dev->dev, "%s: failed with status -%d\n", |
| __func__, status); |
| } |
| |
| return status; |
| } |
| EXPORT_SYMBOL_GPL(cx231xx_send_gpio_cmd); |
| |
| /***************************************************************** |
| * C O N T R O L - Register R E A D / W R I T E functions * |
| *****************************************************************/ |
| int cx231xx_mode_register(struct cx231xx *dev, u16 address, u32 mode) |
| { |
| u8 value[4] = { 0x0, 0x0, 0x0, 0x0 }; |
| u32 tmp = 0; |
| int status = 0; |
| |
| status = |
| cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, address, value, 4); |
| if (status < 0) |
| return status; |
| |
| tmp = le32_to_cpu(*((__le32 *) value)); |
| tmp |= mode; |
| |
| value[0] = (u8) tmp; |
| value[1] = (u8) (tmp >> 8); |
| value[2] = (u8) (tmp >> 16); |
| value[3] = (u8) (tmp >> 24); |
| |
| status = |
| cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, address, value, 4); |
| |
| return status; |
| } |
| |
| /***************************************************************** |
| * I 2 C Internal C O N T R O L functions * |
| *****************************************************************/ |
| int cx231xx_read_i2c_master(struct cx231xx *dev, u8 dev_addr, u16 saddr, |
| u8 saddr_len, u32 *data, u8 data_len, int master) |
| { |
| int status = 0; |
| struct cx231xx_i2c_xfer_data req_data; |
| u8 value[64] = "0"; |
| |
| if (saddr_len == 0) |
| saddr = 0; |
| else if (saddr_len == 1) |
| saddr &= 0xff; |
| |
| /* prepare xfer_data struct */ |
| req_data.dev_addr = dev_addr >> 1; |
| req_data.direction = I2C_M_RD; |
| req_data.saddr_len = saddr_len; |
| req_data.saddr_dat = saddr; |
| req_data.buf_size = data_len; |
| req_data.p_buffer = (u8 *) value; |
| |
| /* usb send command */ |
| if (master == 0) |
| status = dev->cx231xx_send_usb_command(&dev->i2c_bus[0], |
| &req_data); |
| else if (master == 1) |
| status = dev->cx231xx_send_usb_command(&dev->i2c_bus[1], |
| &req_data); |
| else if (master == 2) |
| status = dev->cx231xx_send_usb_command(&dev->i2c_bus[2], |
| &req_data); |
| |
| if (status >= 0) { |
| /* Copy the data read back to main buffer */ |
| if (data_len == 1) |
| *data = value[0]; |
| else if (data_len == 4) |
| *data = |
| value[0] | value[1] << 8 | value[2] << 16 | value[3] |
| << 24; |
| else if (data_len > 4) |
| *data = value[saddr]; |
| } |
| |
| return status; |
| } |
| |
| int cx231xx_write_i2c_master(struct cx231xx *dev, u8 dev_addr, u16 saddr, |
| u8 saddr_len, u32 data, u8 data_len, int master) |
| { |
| int status = 0; |
| u8 value[4] = { 0, 0, 0, 0 }; |
| struct cx231xx_i2c_xfer_data req_data; |
| |
| value[0] = (u8) data; |
| value[1] = (u8) (data >> 8); |
| value[2] = (u8) (data >> 16); |
| value[3] = (u8) (data >> 24); |
| |
| if (saddr_len == 0) |
| saddr = 0; |
| else if (saddr_len == 1) |
| saddr &= 0xff; |
| |
| /* prepare xfer_data struct */ |
| req_data.dev_addr = dev_addr >> 1; |
| req_data.direction = 0; |
| req_data.saddr_len = saddr_len; |
| req_data.saddr_dat = saddr; |
| req_data.buf_size = data_len; |
| req_data.p_buffer = value; |
| |
| /* usb send command */ |
| if (master == 0) |
| status = dev->cx231xx_send_usb_command(&dev->i2c_bus[0], |
| &req_data); |
| else if (master == 1) |
| status = dev->cx231xx_send_usb_command(&dev->i2c_bus[1], |
| &req_data); |
| else if (master == 2) |
| status = dev->cx231xx_send_usb_command(&dev->i2c_bus[2], |
| &req_data); |
| |
| return status; |
| } |
| |
| int cx231xx_read_i2c_data(struct cx231xx *dev, u8 dev_addr, u16 saddr, |
| u8 saddr_len, u32 *data, u8 data_len) |
| { |
| int status = 0; |
| struct cx231xx_i2c_xfer_data req_data; |
| u8 value[4] = { 0, 0, 0, 0 }; |
| |
| if (saddr_len == 0) |
| saddr = 0; |
| else if (saddr_len == 1) |
| saddr &= 0xff; |
| |
| /* prepare xfer_data struct */ |
| req_data.dev_addr = dev_addr >> 1; |
| req_data.direction = I2C_M_RD; |
| req_data.saddr_len = saddr_len; |
| req_data.saddr_dat = saddr; |
| req_data.buf_size = data_len; |
| req_data.p_buffer = (u8 *) value; |
| |
| /* usb send command */ |
| status = dev->cx231xx_send_usb_command(&dev->i2c_bus[0], &req_data); |
| |
| if (status >= 0) { |
| /* Copy the data read back to main buffer */ |
| if (data_len == 1) |
| *data = value[0]; |
| else |
| *data = |
| value[0] | value[1] << 8 | value[2] << 16 | value[3] |
| << 24; |
| } |
| |
| return status; |
| } |
| |
| int cx231xx_write_i2c_data(struct cx231xx *dev, u8 dev_addr, u16 saddr, |
| u8 saddr_len, u32 data, u8 data_len) |
| { |
| int status = 0; |
| u8 value[4] = { 0, 0, 0, 0 }; |
| struct cx231xx_i2c_xfer_data req_data; |
| |
| value[0] = (u8) data; |
| value[1] = (u8) (data >> 8); |
| value[2] = (u8) (data >> 16); |
| value[3] = (u8) (data >> 24); |
| |
| if (saddr_len == 0) |
| saddr = 0; |
| else if (saddr_len == 1) |
| saddr &= 0xff; |
| |
| /* prepare xfer_data struct */ |
| req_data.dev_addr = dev_addr >> 1; |
| req_data.direction = 0; |
| req_data.saddr_len = saddr_len; |
| req_data.saddr_dat = saddr; |
| req_data.buf_size = data_len; |
| req_data.p_buffer = value; |
| |
| /* usb send command */ |
| status = dev->cx231xx_send_usb_command(&dev->i2c_bus[0], &req_data); |
| |
| return status; |
| } |
| |
| int cx231xx_reg_mask_write(struct cx231xx *dev, u8 dev_addr, u8 size, |
| u16 register_address, u8 bit_start, u8 bit_end, |
| u32 value) |
| { |
| int status = 0; |
| u32 tmp; |
| u32 mask = 0; |
| int i; |
| |
| if (bit_start > (size - 1) || bit_end > (size - 1)) |
| return -1; |
| |
| if (size == 8) { |
| status = |
| cx231xx_read_i2c_data(dev, dev_addr, register_address, 2, |
| &tmp, 1); |
| } else { |
| status = |
| cx231xx_read_i2c_data(dev, dev_addr, register_address, 2, |
| &tmp, 4); |
| } |
| |
| if (status < 0) |
| return status; |
| |
| mask = 1 << bit_end; |
| for (i = bit_end; i > bit_start && i > 0; i--) |
| mask = mask + (1 << (i - 1)); |
| |
| value <<= bit_start; |
| |
| if (size == 8) { |
| tmp &= ~mask; |
| tmp |= value; |
| tmp &= 0xff; |
| status = |
| cx231xx_write_i2c_data(dev, dev_addr, register_address, 2, |
| tmp, 1); |
| } else { |
| tmp &= ~mask; |
| tmp |= value; |
| status = |
| cx231xx_write_i2c_data(dev, dev_addr, register_address, 2, |
| tmp, 4); |
| } |
| |
| return status; |
| } |
| |
| int cx231xx_read_modify_write_i2c_dword(struct cx231xx *dev, u8 dev_addr, |
| u16 saddr, u32 mask, u32 value) |
| { |
| u32 temp; |
| int status = 0; |
| |
| status = cx231xx_read_i2c_data(dev, dev_addr, saddr, 2, &temp, 4); |
| |
| if (status < 0) |
| return status; |
| |
| temp &= ~mask; |
| temp |= value; |
| |
| status = cx231xx_write_i2c_data(dev, dev_addr, saddr, 2, temp, 4); |
| |
| return status; |
| } |
| |
| u32 cx231xx_set_field(u32 field_mask, u32 data) |
| { |
| u32 temp; |
| |
| for (temp = field_mask; (temp & 1) == 0; temp >>= 1) |
| data <<= 1; |
| |
| return data; |
| } |