| # SPDX-License-Identifier: GPL-2.0-only |
| menu "CAN USB interfaces" |
| depends on USB |
| |
| config CAN_8DEV_USB |
| tristate "8 devices USB2CAN interface" |
| help |
| This driver supports the USB2CAN interface |
| from 8 devices (http://www.8devices.com). |
| |
| config CAN_EMS_USB |
| tristate "EMS CPC-USB/ARM7 CAN/USB interface" |
| help |
| This driver is for the one channel CPC-USB/ARM7 CAN/USB interface |
| from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). |
| |
| config CAN_ESD_USB2 |
| tristate "ESD USB/2 CAN/USB interface" |
| help |
| This driver supports the CAN-USB/2 interface |
| from esd electronic system design gmbh (http://www.esd.eu). |
| |
| config CAN_GS_USB |
| tristate "Geschwister Schneider UG interfaces" |
| help |
| This driver supports the Geschwister Schneider and bytewerk.org |
| candleLight USB CAN interfaces USB/CAN devices |
| If unsure choose N, |
| choose Y for built in support, |
| M to compile as module (module will be named: gs_usb). |
| |
| config CAN_KVASER_USB |
| tristate "Kvaser CAN/USB interface" |
| help |
| This driver adds support for Kvaser CAN/USB devices like Kvaser |
| Leaf Light, Kvaser USBcan II and Kvaser Memorator Pro 5xHS. |
| |
| The driver provides support for the following devices: |
| - Kvaser Leaf Light |
| - Kvaser Leaf Professional HS |
| - Kvaser Leaf SemiPro HS |
| - Kvaser Leaf Professional LS |
| - Kvaser Leaf Professional SWC |
| - Kvaser Leaf Professional LIN |
| - Kvaser Leaf SemiPro LS |
| - Kvaser Leaf SemiPro SWC |
| - Kvaser Memorator II HS/HS |
| - Kvaser USBcan Professional HS/HS |
| - Kvaser Leaf Light GI |
| - Kvaser Leaf Professional HS (OBD-II connector) |
| - Kvaser Memorator Professional HS/LS |
| - Kvaser Leaf Light "China" |
| - Kvaser BlackBird SemiPro |
| - Kvaser USBcan R |
| - Kvaser Leaf Light v2 |
| - Kvaser Mini PCI Express HS |
| - Kvaser Mini PCI Express 2xHS |
| - Kvaser USBcan Light 2xHS |
| - Kvaser USBcan II HS/HS |
| - Kvaser USBcan II HS/LS |
| - Kvaser USBcan Rugged ("USBcan Rev B") |
| - Kvaser Memorator HS/HS |
| - Kvaser Memorator HS/LS |
| - Scania VCI2 (if you have the Kvaser logo on top) |
| - Kvaser BlackBird v2 |
| - Kvaser Leaf Pro HS v2 |
| - Kvaser Hybrid 2xCAN/LIN |
| - Kvaser Hybrid Pro 2xCAN/LIN |
| - Kvaser Memorator 2xHS v2 |
| - Kvaser Memorator Pro 2xHS v2 |
| - Kvaser Memorator Pro 5xHS |
| - Kvaser USBcan Light 4xHS |
| - Kvaser USBcan Pro 2xHS v2 |
| - Kvaser USBcan Pro 5xHS |
| - ATI Memorator Pro 2xHS v2 |
| - ATI USBcan Pro 2xHS v2 |
| |
| If unsure, say N. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called kvaser_usb. |
| |
| config CAN_MCBA_USB |
| tristate "Microchip CAN BUS Analyzer interface" |
| help |
| This driver supports the CAN BUS Analyzer interface |
| from Microchip (http://www.microchip.com/development-tools/). |
| |
| config CAN_PEAK_USB |
| tristate "PEAK PCAN-USB/USB Pro interfaces for CAN 2.0b/CAN-FD" |
| help |
| This driver supports the PEAK-System Technik USB adapters that enable |
| access to the CAN bus, with repect to the CAN 2.0b and/or CAN-FD |
| standards, that is: |
| |
| PCAN-USB single CAN 2.0b channel USB adapter |
| PCAN-USB Pro dual CAN 2.0b channels USB adapter |
| PCAN-USB FD single CAN-FD channel USB adapter |
| PCAN-USB Pro FD dual CAN-FD channels USB adapter |
| PCAN-Chip USB CAN-FD to USB stamp module |
| PCAN-USB X6 6 CAN-FD channels USB adapter |
| |
| (see also http://www.peak-system.com). |
| |
| config CAN_UCAN |
| tristate "Theobroma Systems UCAN interface" |
| help |
| This driver supports the Theobroma Systems |
| UCAN USB-CAN interface. |
| |
| The UCAN driver supports the microcontroller-based USB/CAN |
| adapters from Theobroma Systems. There are two form-factors |
| that run essentially the same firmware: |
| |
| * Seal: standalone USB stick |
| https://www.theobroma-systems.com/seal) |
| * Mule: integrated on the PCB of various System-on-Modules |
| from Theobroma Systems like the A31-ยตQ7 and the RK3399-Q7 |
| (https://www.theobroma-systems.com/rk3399-q7) |
| |
| endmenu |
