| /* |
| * Copyright © 2014 Red Hat |
| * |
| * Permission to use, copy, modify, distribute, and sell this software and its |
| * documentation for any purpose is hereby granted without fee, provided that |
| * the above copyright notice appear in all copies and that both that copyright |
| * notice and this permission notice appear in supporting documentation, and |
| * that the name of the copyright holders not be used in advertising or |
| * publicity pertaining to distribution of the software without specific, |
| * written prior permission. The copyright holders make no representations |
| * about the suitability of this software for any purpose. It is provided "as |
| * is" without express or implied warranty. |
| * |
| * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, |
| * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO |
| * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR |
| * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, |
| * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER |
| * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE |
| * OF THIS SOFTWARE. |
| */ |
| |
| #include <linux/bitfield.h> |
| #include <linux/delay.h> |
| #include <linux/errno.h> |
| #include <linux/i2c.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/random.h> |
| #include <linux/sched.h> |
| #include <linux/seq_file.h> |
| #include <linux/iopoll.h> |
| |
| #if IS_ENABLED(CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS) |
| #include <linux/stacktrace.h> |
| #include <linux/sort.h> |
| #include <linux/timekeeping.h> |
| #include <linux/math64.h> |
| #endif |
| |
| #include <drm/display/drm_dp_mst_helper.h> |
| #include <drm/drm_atomic.h> |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_drv.h> |
| #include <drm/drm_edid.h> |
| #include <drm/drm_fixed.h> |
| #include <drm/drm_print.h> |
| #include <drm/drm_probe_helper.h> |
| |
| #include "drm_dp_helper_internal.h" |
| #include "drm_dp_mst_topology_internal.h" |
| |
| /** |
| * DOC: dp mst helper |
| * |
| * These functions contain parts of the DisplayPort 1.2a MultiStream Transport |
| * protocol. The helpers contain a topology manager and bandwidth manager. |
| * The helpers encapsulate the sending and received of sideband msgs. |
| */ |
| struct drm_dp_pending_up_req { |
| struct drm_dp_sideband_msg_hdr hdr; |
| struct drm_dp_sideband_msg_req_body msg; |
| struct list_head next; |
| }; |
| |
| static bool dump_dp_payload_table(struct drm_dp_mst_topology_mgr *mgr, |
| char *buf); |
| |
| static void drm_dp_mst_topology_put_port(struct drm_dp_mst_port *port); |
| |
| static int drm_dp_dpcd_write_payload(struct drm_dp_mst_topology_mgr *mgr, |
| int id, u8 start_slot, u8 num_slots); |
| |
| static int drm_dp_send_dpcd_read(struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_port *port, |
| int offset, int size, u8 *bytes); |
| static int drm_dp_send_dpcd_write(struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_port *port, |
| int offset, int size, u8 *bytes); |
| |
| static int drm_dp_send_link_address(struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_branch *mstb); |
| |
| static void |
| drm_dp_send_clear_payload_id_table(struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_branch *mstb); |
| |
| static int drm_dp_send_enum_path_resources(struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_branch *mstb, |
| struct drm_dp_mst_port *port); |
| static bool drm_dp_validate_guid(struct drm_dp_mst_topology_mgr *mgr, |
| guid_t *guid); |
| |
| static int drm_dp_mst_register_i2c_bus(struct drm_dp_mst_port *port); |
| static void drm_dp_mst_unregister_i2c_bus(struct drm_dp_mst_port *port); |
| static void drm_dp_mst_kick_tx(struct drm_dp_mst_topology_mgr *mgr); |
| |
| static bool drm_dp_mst_port_downstream_of_branch(struct drm_dp_mst_port *port, |
| struct drm_dp_mst_branch *branch); |
| |
| #define DBG_PREFIX "[dp_mst]" |
| |
| #define DP_STR(x) [DP_ ## x] = #x |
| |
| static const char *drm_dp_mst_req_type_str(u8 req_type) |
| { |
| static const char * const req_type_str[] = { |
| DP_STR(GET_MSG_TRANSACTION_VERSION), |
| DP_STR(LINK_ADDRESS), |
| DP_STR(CONNECTION_STATUS_NOTIFY), |
| DP_STR(ENUM_PATH_RESOURCES), |
| DP_STR(ALLOCATE_PAYLOAD), |
| DP_STR(QUERY_PAYLOAD), |
| DP_STR(RESOURCE_STATUS_NOTIFY), |
| DP_STR(CLEAR_PAYLOAD_ID_TABLE), |
| DP_STR(REMOTE_DPCD_READ), |
| DP_STR(REMOTE_DPCD_WRITE), |
| DP_STR(REMOTE_I2C_READ), |
| DP_STR(REMOTE_I2C_WRITE), |
| DP_STR(POWER_UP_PHY), |
| DP_STR(POWER_DOWN_PHY), |
| DP_STR(SINK_EVENT_NOTIFY), |
| DP_STR(QUERY_STREAM_ENC_STATUS), |
| }; |
| |
| if (req_type >= ARRAY_SIZE(req_type_str) || |
| !req_type_str[req_type]) |
| return "unknown"; |
| |
| return req_type_str[req_type]; |
| } |
| |
| #undef DP_STR |
| #define DP_STR(x) [DP_NAK_ ## x] = #x |
| |
| static const char *drm_dp_mst_nak_reason_str(u8 nak_reason) |
| { |
| static const char * const nak_reason_str[] = { |
| DP_STR(WRITE_FAILURE), |
| DP_STR(INVALID_READ), |
| DP_STR(CRC_FAILURE), |
| DP_STR(BAD_PARAM), |
| DP_STR(DEFER), |
| DP_STR(LINK_FAILURE), |
| DP_STR(NO_RESOURCES), |
| DP_STR(DPCD_FAIL), |
| DP_STR(I2C_NAK), |
| DP_STR(ALLOCATE_FAIL), |
| }; |
| |
| if (nak_reason >= ARRAY_SIZE(nak_reason_str) || |
| !nak_reason_str[nak_reason]) |
| return "unknown"; |
| |
| return nak_reason_str[nak_reason]; |
| } |
| |
| #undef DP_STR |
| #define DP_STR(x) [DRM_DP_SIDEBAND_TX_ ## x] = #x |
| |
| static const char *drm_dp_mst_sideband_tx_state_str(int state) |
| { |
| static const char * const sideband_reason_str[] = { |
| DP_STR(QUEUED), |
| DP_STR(START_SEND), |
| DP_STR(SENT), |
| DP_STR(RX), |
| DP_STR(TIMEOUT), |
| }; |
| |
| if (state >= ARRAY_SIZE(sideband_reason_str) || |
| !sideband_reason_str[state]) |
| return "unknown"; |
| |
| return sideband_reason_str[state]; |
| } |
| |
| static int |
| drm_dp_mst_rad_to_str(const u8 rad[8], u8 lct, char *out, size_t len) |
| { |
| int i; |
| u8 unpacked_rad[16]; |
| |
| for (i = 0; i < lct; i++) { |
| if (i % 2) |
| unpacked_rad[i] = rad[i / 2] >> 4; |
| else |
| unpacked_rad[i] = rad[i / 2] & BIT_MASK(4); |
| } |
| |
| /* TODO: Eventually add something to printk so we can format the rad |
| * like this: 1.2.3 |
| */ |
| return snprintf(out, len, "%*phC", lct, unpacked_rad); |
| } |
| |
| /* sideband msg handling */ |
| static u8 drm_dp_msg_header_crc4(const uint8_t *data, size_t num_nibbles) |
| { |
| u8 bitmask = 0x80; |
| u8 bitshift = 7; |
| u8 array_index = 0; |
| int number_of_bits = num_nibbles * 4; |
| u8 remainder = 0; |
| |
| while (number_of_bits != 0) { |
| number_of_bits--; |
| remainder <<= 1; |
| remainder |= (data[array_index] & bitmask) >> bitshift; |
| bitmask >>= 1; |
| bitshift--; |
| if (bitmask == 0) { |
| bitmask = 0x80; |
| bitshift = 7; |
| array_index++; |
| } |
| if ((remainder & 0x10) == 0x10) |
| remainder ^= 0x13; |
| } |
| |
| number_of_bits = 4; |
| while (number_of_bits != 0) { |
| number_of_bits--; |
| remainder <<= 1; |
| if ((remainder & 0x10) != 0) |
| remainder ^= 0x13; |
| } |
| |
| return remainder; |
| } |
| |
| static u8 drm_dp_msg_data_crc4(const uint8_t *data, u8 number_of_bytes) |
| { |
| u8 bitmask = 0x80; |
| u8 bitshift = 7; |
| u8 array_index = 0; |
| int number_of_bits = number_of_bytes * 8; |
| u16 remainder = 0; |
| |
| while (number_of_bits != 0) { |
| number_of_bits--; |
| remainder <<= 1; |
| remainder |= (data[array_index] & bitmask) >> bitshift; |
| bitmask >>= 1; |
| bitshift--; |
| if (bitmask == 0) { |
| bitmask = 0x80; |
| bitshift = 7; |
| array_index++; |
| } |
| if ((remainder & 0x100) == 0x100) |
| remainder ^= 0xd5; |
| } |
| |
| number_of_bits = 8; |
| while (number_of_bits != 0) { |
| number_of_bits--; |
| remainder <<= 1; |
| if ((remainder & 0x100) != 0) |
| remainder ^= 0xd5; |
| } |
| |
| return remainder & 0xff; |
| } |
| static inline u8 drm_dp_calc_sb_hdr_size(struct drm_dp_sideband_msg_hdr *hdr) |
| { |
| u8 size = 3; |
| |
| size += (hdr->lct / 2); |
| return size; |
| } |
| |
| static void drm_dp_encode_sideband_msg_hdr(struct drm_dp_sideband_msg_hdr *hdr, |
| u8 *buf, int *len) |
| { |
| int idx = 0; |
| int i; |
| u8 crc4; |
| |
| buf[idx++] = ((hdr->lct & 0xf) << 4) | (hdr->lcr & 0xf); |
| for (i = 0; i < (hdr->lct / 2); i++) |
| buf[idx++] = hdr->rad[i]; |
| buf[idx++] = (hdr->broadcast << 7) | (hdr->path_msg << 6) | |
| (hdr->msg_len & 0x3f); |
| buf[idx++] = (hdr->somt << 7) | (hdr->eomt << 6) | (hdr->seqno << 4); |
| |
| crc4 = drm_dp_msg_header_crc4(buf, (idx * 2) - 1); |
| buf[idx - 1] |= (crc4 & 0xf); |
| |
| *len = idx; |
| } |
| |
| static bool drm_dp_decode_sideband_msg_hdr(const struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_sideband_msg_hdr *hdr, |
| u8 *buf, int buflen, u8 *hdrlen) |
| { |
| u8 crc4; |
| u8 len; |
| int i; |
| u8 idx; |
| |
| if (buf[0] == 0) |
| return false; |
| len = 3; |
| len += ((buf[0] & 0xf0) >> 4) / 2; |
| if (len > buflen) |
| return false; |
| crc4 = drm_dp_msg_header_crc4(buf, (len * 2) - 1); |
| |
| if ((crc4 & 0xf) != (buf[len - 1] & 0xf)) { |
| drm_dbg_kms(mgr->dev, "crc4 mismatch 0x%x 0x%x\n", crc4, buf[len - 1]); |
| return false; |
| } |
| |
| hdr->lct = (buf[0] & 0xf0) >> 4; |
| hdr->lcr = (buf[0] & 0xf); |
| idx = 1; |
| for (i = 0; i < (hdr->lct / 2); i++) |
| hdr->rad[i] = buf[idx++]; |
| hdr->broadcast = (buf[idx] >> 7) & 0x1; |
| hdr->path_msg = (buf[idx] >> 6) & 0x1; |
| hdr->msg_len = buf[idx] & 0x3f; |
| idx++; |
| hdr->somt = (buf[idx] >> 7) & 0x1; |
| hdr->eomt = (buf[idx] >> 6) & 0x1; |
| hdr->seqno = (buf[idx] >> 4) & 0x1; |
| idx++; |
| *hdrlen = idx; |
| return true; |
| } |
| |
| void |
| drm_dp_encode_sideband_req(const struct drm_dp_sideband_msg_req_body *req, |
| struct drm_dp_sideband_msg_tx *raw) |
| { |
| int idx = 0; |
| int i; |
| u8 *buf = raw->msg; |
| |
| buf[idx++] = req->req_type & 0x7f; |
| |
| switch (req->req_type) { |
| case DP_ENUM_PATH_RESOURCES: |
| case DP_POWER_DOWN_PHY: |
| case DP_POWER_UP_PHY: |
| buf[idx] = (req->u.port_num.port_number & 0xf) << 4; |
| idx++; |
| break; |
| case DP_ALLOCATE_PAYLOAD: |
| buf[idx] = (req->u.allocate_payload.port_number & 0xf) << 4 | |
| (req->u.allocate_payload.number_sdp_streams & 0xf); |
| idx++; |
| buf[idx] = (req->u.allocate_payload.vcpi & 0x7f); |
| idx++; |
| buf[idx] = (req->u.allocate_payload.pbn >> 8); |
| idx++; |
| buf[idx] = (req->u.allocate_payload.pbn & 0xff); |
| idx++; |
| for (i = 0; i < req->u.allocate_payload.number_sdp_streams / 2; i++) { |
| buf[idx] = ((req->u.allocate_payload.sdp_stream_sink[i * 2] & 0xf) << 4) | |
| (req->u.allocate_payload.sdp_stream_sink[i * 2 + 1] & 0xf); |
| idx++; |
| } |
| if (req->u.allocate_payload.number_sdp_streams & 1) { |
| i = req->u.allocate_payload.number_sdp_streams - 1; |
| buf[idx] = (req->u.allocate_payload.sdp_stream_sink[i] & 0xf) << 4; |
| idx++; |
| } |
| break; |
| case DP_QUERY_PAYLOAD: |
| buf[idx] = (req->u.query_payload.port_number & 0xf) << 4; |
| idx++; |
| buf[idx] = (req->u.query_payload.vcpi & 0x7f); |
| idx++; |
| break; |
| case DP_REMOTE_DPCD_READ: |
| buf[idx] = (req->u.dpcd_read.port_number & 0xf) << 4; |
| buf[idx] |= ((req->u.dpcd_read.dpcd_address & 0xf0000) >> 16) & 0xf; |
| idx++; |
| buf[idx] = (req->u.dpcd_read.dpcd_address & 0xff00) >> 8; |
| idx++; |
| buf[idx] = (req->u.dpcd_read.dpcd_address & 0xff); |
| idx++; |
| buf[idx] = (req->u.dpcd_read.num_bytes); |
| idx++; |
| break; |
| |
| case DP_REMOTE_DPCD_WRITE: |
| buf[idx] = (req->u.dpcd_write.port_number & 0xf) << 4; |
| buf[idx] |= ((req->u.dpcd_write.dpcd_address & 0xf0000) >> 16) & 0xf; |
| idx++; |
| buf[idx] = (req->u.dpcd_write.dpcd_address & 0xff00) >> 8; |
| idx++; |
| buf[idx] = (req->u.dpcd_write.dpcd_address & 0xff); |
| idx++; |
| buf[idx] = (req->u.dpcd_write.num_bytes); |
| idx++; |
| memcpy(&buf[idx], req->u.dpcd_write.bytes, req->u.dpcd_write.num_bytes); |
| idx += req->u.dpcd_write.num_bytes; |
| break; |
| case DP_REMOTE_I2C_READ: |
| buf[idx] = (req->u.i2c_read.port_number & 0xf) << 4; |
| buf[idx] |= (req->u.i2c_read.num_transactions & 0x3); |
| idx++; |
| for (i = 0; i < (req->u.i2c_read.num_transactions & 0x3); i++) { |
| buf[idx] = req->u.i2c_read.transactions[i].i2c_dev_id & 0x7f; |
| idx++; |
| buf[idx] = req->u.i2c_read.transactions[i].num_bytes; |
| idx++; |
| memcpy(&buf[idx], req->u.i2c_read.transactions[i].bytes, req->u.i2c_read.transactions[i].num_bytes); |
| idx += req->u.i2c_read.transactions[i].num_bytes; |
| |
| buf[idx] = (req->u.i2c_read.transactions[i].no_stop_bit & 0x1) << 4; |
| buf[idx] |= (req->u.i2c_read.transactions[i].i2c_transaction_delay & 0xf); |
| idx++; |
| } |
| buf[idx] = (req->u.i2c_read.read_i2c_device_id) & 0x7f; |
| idx++; |
| buf[idx] = (req->u.i2c_read.num_bytes_read); |
| idx++; |
| break; |
| |
| case DP_REMOTE_I2C_WRITE: |
| buf[idx] = (req->u.i2c_write.port_number & 0xf) << 4; |
| idx++; |
| buf[idx] = (req->u.i2c_write.write_i2c_device_id) & 0x7f; |
| idx++; |
| buf[idx] = (req->u.i2c_write.num_bytes); |
| idx++; |
| memcpy(&buf[idx], req->u.i2c_write.bytes, req->u.i2c_write.num_bytes); |
| idx += req->u.i2c_write.num_bytes; |
| break; |
| case DP_QUERY_STREAM_ENC_STATUS: { |
| const struct drm_dp_query_stream_enc_status *msg; |
| |
| msg = &req->u.enc_status; |
| buf[idx] = msg->stream_id; |
| idx++; |
| memcpy(&buf[idx], msg->client_id, sizeof(msg->client_id)); |
| idx += sizeof(msg->client_id); |
| buf[idx] = 0; |
| buf[idx] |= FIELD_PREP(GENMASK(1, 0), msg->stream_event); |
| buf[idx] |= msg->valid_stream_event ? BIT(2) : 0; |
| buf[idx] |= FIELD_PREP(GENMASK(4, 3), msg->stream_behavior); |
| buf[idx] |= msg->valid_stream_behavior ? BIT(5) : 0; |
| idx++; |
| } |
| break; |
| } |
| raw->cur_len = idx; |
| } |
| EXPORT_SYMBOL_FOR_TESTS_ONLY(drm_dp_encode_sideband_req); |
| |
| /* Decode a sideband request we've encoded, mainly used for debugging */ |
| int |
| drm_dp_decode_sideband_req(const struct drm_dp_sideband_msg_tx *raw, |
| struct drm_dp_sideband_msg_req_body *req) |
| { |
| const u8 *buf = raw->msg; |
| int i, idx = 0; |
| |
| req->req_type = buf[idx++] & 0x7f; |
| switch (req->req_type) { |
| case DP_ENUM_PATH_RESOURCES: |
| case DP_POWER_DOWN_PHY: |
| case DP_POWER_UP_PHY: |
| req->u.port_num.port_number = (buf[idx] >> 4) & 0xf; |
| break; |
| case DP_ALLOCATE_PAYLOAD: |
| { |
| struct drm_dp_allocate_payload *a = |
| &req->u.allocate_payload; |
| |
| a->number_sdp_streams = buf[idx] & 0xf; |
| a->port_number = (buf[idx] >> 4) & 0xf; |
| |
| WARN_ON(buf[++idx] & 0x80); |
| a->vcpi = buf[idx] & 0x7f; |
| |
| a->pbn = buf[++idx] << 8; |
| a->pbn |= buf[++idx]; |
| |
| idx++; |
| for (i = 0; i < a->number_sdp_streams; i++) { |
| a->sdp_stream_sink[i] = |
| (buf[idx + (i / 2)] >> ((i % 2) ? 0 : 4)) & 0xf; |
| } |
| } |
| break; |
| case DP_QUERY_PAYLOAD: |
| req->u.query_payload.port_number = (buf[idx] >> 4) & 0xf; |
| WARN_ON(buf[++idx] & 0x80); |
| req->u.query_payload.vcpi = buf[idx] & 0x7f; |
| break; |
| case DP_REMOTE_DPCD_READ: |
| { |
| struct drm_dp_remote_dpcd_read *r = &req->u.dpcd_read; |
| |
| r->port_number = (buf[idx] >> 4) & 0xf; |
| |
| r->dpcd_address = (buf[idx] << 16) & 0xf0000; |
| r->dpcd_address |= (buf[++idx] << 8) & 0xff00; |
| r->dpcd_address |= buf[++idx] & 0xff; |
| |
| r->num_bytes = buf[++idx]; |
| } |
| break; |
| case DP_REMOTE_DPCD_WRITE: |
| { |
| struct drm_dp_remote_dpcd_write *w = |
| &req->u.dpcd_write; |
| |
| w->port_number = (buf[idx] >> 4) & 0xf; |
| |
| w->dpcd_address = (buf[idx] << 16) & 0xf0000; |
| w->dpcd_address |= (buf[++idx] << 8) & 0xff00; |
| w->dpcd_address |= buf[++idx] & 0xff; |
| |
| w->num_bytes = buf[++idx]; |
| |
| w->bytes = kmemdup(&buf[++idx], w->num_bytes, |
| GFP_KERNEL); |
| if (!w->bytes) |
| return -ENOMEM; |
| } |
| break; |
| case DP_REMOTE_I2C_READ: |
| { |
| struct drm_dp_remote_i2c_read *r = &req->u.i2c_read; |
| struct drm_dp_remote_i2c_read_tx *tx; |
| bool failed = false; |
| |
| r->num_transactions = buf[idx] & 0x3; |
| r->port_number = (buf[idx] >> 4) & 0xf; |
| for (i = 0; i < r->num_transactions; i++) { |
| tx = &r->transactions[i]; |
| |
| tx->i2c_dev_id = buf[++idx] & 0x7f; |
| tx->num_bytes = buf[++idx]; |
| tx->bytes = kmemdup(&buf[++idx], |
| tx->num_bytes, |
| GFP_KERNEL); |
| if (!tx->bytes) { |
| failed = true; |
| break; |
| } |
| idx += tx->num_bytes; |
| tx->no_stop_bit = (buf[idx] >> 5) & 0x1; |
| tx->i2c_transaction_delay = buf[idx] & 0xf; |
| } |
| |
| if (failed) { |
| for (i = 0; i < r->num_transactions; i++) { |
| tx = &r->transactions[i]; |
| kfree(tx->bytes); |
| } |
| return -ENOMEM; |
| } |
| |
| r->read_i2c_device_id = buf[++idx] & 0x7f; |
| r->num_bytes_read = buf[++idx]; |
| } |
| break; |
| case DP_REMOTE_I2C_WRITE: |
| { |
| struct drm_dp_remote_i2c_write *w = &req->u.i2c_write; |
| |
| w->port_number = (buf[idx] >> 4) & 0xf; |
| w->write_i2c_device_id = buf[++idx] & 0x7f; |
| w->num_bytes = buf[++idx]; |
| w->bytes = kmemdup(&buf[++idx], w->num_bytes, |
| GFP_KERNEL); |
| if (!w->bytes) |
| return -ENOMEM; |
| } |
| break; |
| case DP_QUERY_STREAM_ENC_STATUS: |
| req->u.enc_status.stream_id = buf[idx++]; |
| for (i = 0; i < sizeof(req->u.enc_status.client_id); i++) |
| req->u.enc_status.client_id[i] = buf[idx++]; |
| |
| req->u.enc_status.stream_event = FIELD_GET(GENMASK(1, 0), |
| buf[idx]); |
| req->u.enc_status.valid_stream_event = FIELD_GET(BIT(2), |
| buf[idx]); |
| req->u.enc_status.stream_behavior = FIELD_GET(GENMASK(4, 3), |
| buf[idx]); |
| req->u.enc_status.valid_stream_behavior = FIELD_GET(BIT(5), |
| buf[idx]); |
| break; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_FOR_TESTS_ONLY(drm_dp_decode_sideband_req); |
| |
| void |
| drm_dp_dump_sideband_msg_req_body(const struct drm_dp_sideband_msg_req_body *req, |
| int indent, struct drm_printer *printer) |
| { |
| int i; |
| |
| #define P(f, ...) drm_printf_indent(printer, indent, f, ##__VA_ARGS__) |
| if (req->req_type == DP_LINK_ADDRESS) { |
| /* No contents to print */ |
| P("type=%s\n", drm_dp_mst_req_type_str(req->req_type)); |
| return; |
| } |
| |
| P("type=%s contents:\n", drm_dp_mst_req_type_str(req->req_type)); |
| indent++; |
| |
| switch (req->req_type) { |
| case DP_ENUM_PATH_RESOURCES: |
| case DP_POWER_DOWN_PHY: |
| case DP_POWER_UP_PHY: |
| P("port=%d\n", req->u.port_num.port_number); |
| break; |
| case DP_ALLOCATE_PAYLOAD: |
| P("port=%d vcpi=%d pbn=%d sdp_streams=%d %*ph\n", |
| req->u.allocate_payload.port_number, |
| req->u.allocate_payload.vcpi, req->u.allocate_payload.pbn, |
| req->u.allocate_payload.number_sdp_streams, |
| req->u.allocate_payload.number_sdp_streams, |
| req->u.allocate_payload.sdp_stream_sink); |
| break; |
| case DP_QUERY_PAYLOAD: |
| P("port=%d vcpi=%d\n", |
| req->u.query_payload.port_number, |
| req->u.query_payload.vcpi); |
| break; |
| case DP_REMOTE_DPCD_READ: |
| P("port=%d dpcd_addr=%05x len=%d\n", |
| req->u.dpcd_read.port_number, req->u.dpcd_read.dpcd_address, |
| req->u.dpcd_read.num_bytes); |
| break; |
| case DP_REMOTE_DPCD_WRITE: |
| P("port=%d addr=%05x len=%d: %*ph\n", |
| req->u.dpcd_write.port_number, |
| req->u.dpcd_write.dpcd_address, |
| req->u.dpcd_write.num_bytes, req->u.dpcd_write.num_bytes, |
| req->u.dpcd_write.bytes); |
| break; |
| case DP_REMOTE_I2C_READ: |
| P("port=%d num_tx=%d id=%d size=%d:\n", |
| req->u.i2c_read.port_number, |
| req->u.i2c_read.num_transactions, |
| req->u.i2c_read.read_i2c_device_id, |
| req->u.i2c_read.num_bytes_read); |
| |
| indent++; |
| for (i = 0; i < req->u.i2c_read.num_transactions; i++) { |
| const struct drm_dp_remote_i2c_read_tx *rtx = |
| &req->u.i2c_read.transactions[i]; |
| |
| P("%d: id=%03d size=%03d no_stop_bit=%d tx_delay=%03d: %*ph\n", |
| i, rtx->i2c_dev_id, rtx->num_bytes, |
| rtx->no_stop_bit, rtx->i2c_transaction_delay, |
| rtx->num_bytes, rtx->bytes); |
| } |
| break; |
| case DP_REMOTE_I2C_WRITE: |
| P("port=%d id=%d size=%d: %*ph\n", |
| req->u.i2c_write.port_number, |
| req->u.i2c_write.write_i2c_device_id, |
| req->u.i2c_write.num_bytes, req->u.i2c_write.num_bytes, |
| req->u.i2c_write.bytes); |
| break; |
| case DP_QUERY_STREAM_ENC_STATUS: |
| P("stream_id=%u client_id=%*ph stream_event=%x " |
| "valid_event=%d stream_behavior=%x valid_behavior=%d", |
| req->u.enc_status.stream_id, |
| (int)ARRAY_SIZE(req->u.enc_status.client_id), |
| req->u.enc_status.client_id, req->u.enc_status.stream_event, |
| req->u.enc_status.valid_stream_event, |
| req->u.enc_status.stream_behavior, |
| req->u.enc_status.valid_stream_behavior); |
| break; |
| default: |
| P("???\n"); |
| break; |
| } |
| #undef P |
| } |
| EXPORT_SYMBOL_FOR_TESTS_ONLY(drm_dp_dump_sideband_msg_req_body); |
| |
| static inline void |
| drm_dp_mst_dump_sideband_msg_tx(struct drm_printer *p, |
| const struct drm_dp_sideband_msg_tx *txmsg) |
| { |
| struct drm_dp_sideband_msg_req_body req; |
| char buf[64]; |
| int ret; |
| int i; |
| |
| drm_dp_mst_rad_to_str(txmsg->dst->rad, txmsg->dst->lct, buf, |
| sizeof(buf)); |
| drm_printf(p, "txmsg cur_offset=%x cur_len=%x seqno=%x state=%s path_msg=%d dst=%s\n", |
| txmsg->cur_offset, txmsg->cur_len, txmsg->seqno, |
| drm_dp_mst_sideband_tx_state_str(txmsg->state), |
| txmsg->path_msg, buf); |
| |
| ret = drm_dp_decode_sideband_req(txmsg, &req); |
| if (ret) { |
| drm_printf(p, "<failed to decode sideband req: %d>\n", ret); |
| return; |
| } |
| drm_dp_dump_sideband_msg_req_body(&req, 1, p); |
| |
| switch (req.req_type) { |
| case DP_REMOTE_DPCD_WRITE: |
| kfree(req.u.dpcd_write.bytes); |
| break; |
| case DP_REMOTE_I2C_READ: |
| for (i = 0; i < req.u.i2c_read.num_transactions; i++) |
| kfree(req.u.i2c_read.transactions[i].bytes); |
| break; |
| case DP_REMOTE_I2C_WRITE: |
| kfree(req.u.i2c_write.bytes); |
| break; |
| } |
| } |
| |
| static void drm_dp_crc_sideband_chunk_req(u8 *msg, u8 len) |
| { |
| u8 crc4; |
| |
| crc4 = drm_dp_msg_data_crc4(msg, len); |
| msg[len] = crc4; |
| } |
| |
| static void drm_dp_encode_sideband_reply(struct drm_dp_sideband_msg_reply_body *rep, |
| struct drm_dp_sideband_msg_tx *raw) |
| { |
| int idx = 0; |
| u8 *buf = raw->msg; |
| |
| buf[idx++] = (rep->reply_type & 0x1) << 7 | (rep->req_type & 0x7f); |
| |
| raw->cur_len = idx; |
| } |
| |
| static int drm_dp_sideband_msg_set_header(struct drm_dp_sideband_msg_rx *msg, |
| struct drm_dp_sideband_msg_hdr *hdr, |
| u8 hdrlen) |
| { |
| /* |
| * ignore out-of-order messages or messages that are part of a |
| * failed transaction |
| */ |
| if (!hdr->somt && !msg->have_somt) |
| return false; |
| |
| /* get length contained in this portion */ |
| msg->curchunk_idx = 0; |
| msg->curchunk_len = hdr->msg_len; |
| msg->curchunk_hdrlen = hdrlen; |
| |
| /* we have already gotten an somt - don't bother parsing */ |
| if (hdr->somt && msg->have_somt) |
| return false; |
| |
| if (hdr->somt) { |
| memcpy(&msg->initial_hdr, hdr, |
| sizeof(struct drm_dp_sideband_msg_hdr)); |
| msg->have_somt = true; |
| } |
| if (hdr->eomt) |
| msg->have_eomt = true; |
| |
| return true; |
| } |
| |
| /* this adds a chunk of msg to the builder to get the final msg */ |
| static bool drm_dp_sideband_append_payload(struct drm_dp_sideband_msg_rx *msg, |
| u8 *replybuf, u8 replybuflen) |
| { |
| u8 crc4; |
| |
| memcpy(&msg->chunk[msg->curchunk_idx], replybuf, replybuflen); |
| msg->curchunk_idx += replybuflen; |
| |
| if (msg->curchunk_idx >= msg->curchunk_len) { |
| /* do CRC */ |
| crc4 = drm_dp_msg_data_crc4(msg->chunk, msg->curchunk_len - 1); |
| if (crc4 != msg->chunk[msg->curchunk_len - 1]) |
| print_hex_dump(KERN_DEBUG, "wrong crc", |
| DUMP_PREFIX_NONE, 16, 1, |
| msg->chunk, msg->curchunk_len, false); |
| /* copy chunk into bigger msg */ |
| memcpy(&msg->msg[msg->curlen], msg->chunk, msg->curchunk_len - 1); |
| msg->curlen += msg->curchunk_len - 1; |
| } |
| return true; |
| } |
| |
| static bool drm_dp_sideband_parse_link_address(const struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_sideband_msg_rx *raw, |
| struct drm_dp_sideband_msg_reply_body *repmsg) |
| { |
| int idx = 1; |
| int i; |
| |
| import_guid(&repmsg->u.link_addr.guid, &raw->msg[idx]); |
| idx += 16; |
| repmsg->u.link_addr.nports = raw->msg[idx] & 0xf; |
| idx++; |
| if (idx > raw->curlen) |
| goto fail_len; |
| for (i = 0; i < repmsg->u.link_addr.nports; i++) { |
| if (raw->msg[idx] & 0x80) |
| repmsg->u.link_addr.ports[i].input_port = 1; |
| |
| repmsg->u.link_addr.ports[i].peer_device_type = (raw->msg[idx] >> 4) & 0x7; |
| repmsg->u.link_addr.ports[i].port_number = (raw->msg[idx] & 0xf); |
| |
| idx++; |
| if (idx > raw->curlen) |
| goto fail_len; |
| repmsg->u.link_addr.ports[i].mcs = (raw->msg[idx] >> 7) & 0x1; |
| repmsg->u.link_addr.ports[i].ddps = (raw->msg[idx] >> 6) & 0x1; |
| if (repmsg->u.link_addr.ports[i].input_port == 0) |
| repmsg->u.link_addr.ports[i].legacy_device_plug_status = (raw->msg[idx] >> 5) & 0x1; |
| idx++; |
| if (idx > raw->curlen) |
| goto fail_len; |
| if (repmsg->u.link_addr.ports[i].input_port == 0) { |
| repmsg->u.link_addr.ports[i].dpcd_revision = (raw->msg[idx]); |
| idx++; |
| if (idx > raw->curlen) |
| goto fail_len; |
| import_guid(&repmsg->u.link_addr.ports[i].peer_guid, &raw->msg[idx]); |
| idx += 16; |
| if (idx > raw->curlen) |
| goto fail_len; |
| repmsg->u.link_addr.ports[i].num_sdp_streams = (raw->msg[idx] >> 4) & 0xf; |
| repmsg->u.link_addr.ports[i].num_sdp_stream_sinks = (raw->msg[idx] & 0xf); |
| idx++; |
| |
| } |
| if (idx > raw->curlen) |
| goto fail_len; |
| } |
| |
| return true; |
| fail_len: |
| DRM_DEBUG_KMS("link address reply parse length fail %d %d\n", idx, raw->curlen); |
| return false; |
| } |
| |
| static bool drm_dp_sideband_parse_remote_dpcd_read(struct drm_dp_sideband_msg_rx *raw, |
| struct drm_dp_sideband_msg_reply_body *repmsg) |
| { |
| int idx = 1; |
| |
| repmsg->u.remote_dpcd_read_ack.port_number = raw->msg[idx] & 0xf; |
| idx++; |
| if (idx > raw->curlen) |
| goto fail_len; |
| repmsg->u.remote_dpcd_read_ack.num_bytes = raw->msg[idx]; |
| idx++; |
| if (idx > raw->curlen) |
| goto fail_len; |
| |
| memcpy(repmsg->u.remote_dpcd_read_ack.bytes, &raw->msg[idx], repmsg->u.remote_dpcd_read_ack.num_bytes); |
| return true; |
| fail_len: |
| DRM_DEBUG_KMS("link address reply parse length fail %d %d\n", idx, raw->curlen); |
| return false; |
| } |
| |
| static bool drm_dp_sideband_parse_remote_dpcd_write(struct drm_dp_sideband_msg_rx *raw, |
| struct drm_dp_sideband_msg_reply_body *repmsg) |
| { |
| int idx = 1; |
| |
| repmsg->u.remote_dpcd_write_ack.port_number = raw->msg[idx] & 0xf; |
| idx++; |
| if (idx > raw->curlen) |
| goto fail_len; |
| return true; |
| fail_len: |
| DRM_DEBUG_KMS("parse length fail %d %d\n", idx, raw->curlen); |
| return false; |
| } |
| |
| static bool drm_dp_sideband_parse_remote_i2c_read_ack(struct drm_dp_sideband_msg_rx *raw, |
| struct drm_dp_sideband_msg_reply_body *repmsg) |
| { |
| int idx = 1; |
| |
| repmsg->u.remote_i2c_read_ack.port_number = (raw->msg[idx] & 0xf); |
| idx++; |
| if (idx > raw->curlen) |
| goto fail_len; |
| repmsg->u.remote_i2c_read_ack.num_bytes = raw->msg[idx]; |
| idx++; |
| /* TODO check */ |
| memcpy(repmsg->u.remote_i2c_read_ack.bytes, &raw->msg[idx], repmsg->u.remote_i2c_read_ack.num_bytes); |
| return true; |
| fail_len: |
| DRM_DEBUG_KMS("remote i2c reply parse length fail %d %d\n", idx, raw->curlen); |
| return false; |
| } |
| |
| static bool drm_dp_sideband_parse_enum_path_resources_ack(struct drm_dp_sideband_msg_rx *raw, |
| struct drm_dp_sideband_msg_reply_body *repmsg) |
| { |
| int idx = 1; |
| |
| repmsg->u.path_resources.port_number = (raw->msg[idx] >> 4) & 0xf; |
| repmsg->u.path_resources.fec_capable = raw->msg[idx] & 0x1; |
| idx++; |
| if (idx > raw->curlen) |
| goto fail_len; |
| repmsg->u.path_resources.full_payload_bw_number = (raw->msg[idx] << 8) | (raw->msg[idx+1]); |
| idx += 2; |
| if (idx > raw->curlen) |
| goto fail_len; |
| repmsg->u.path_resources.avail_payload_bw_number = (raw->msg[idx] << 8) | (raw->msg[idx+1]); |
| idx += 2; |
| if (idx > raw->curlen) |
| goto fail_len; |
| return true; |
| fail_len: |
| DRM_DEBUG_KMS("enum resource parse length fail %d %d\n", idx, raw->curlen); |
| return false; |
| } |
| |
| static bool drm_dp_sideband_parse_allocate_payload_ack(struct drm_dp_sideband_msg_rx *raw, |
| struct drm_dp_sideband_msg_reply_body *repmsg) |
| { |
| int idx = 1; |
| |
| repmsg->u.allocate_payload.port_number = (raw->msg[idx] >> 4) & 0xf; |
| idx++; |
| if (idx > raw->curlen) |
| goto fail_len; |
| repmsg->u.allocate_payload.vcpi = raw->msg[idx]; |
| idx++; |
| if (idx > raw->curlen) |
| goto fail_len; |
| repmsg->u.allocate_payload.allocated_pbn = (raw->msg[idx] << 8) | (raw->msg[idx+1]); |
| idx += 2; |
| if (idx > raw->curlen) |
| goto fail_len; |
| return true; |
| fail_len: |
| DRM_DEBUG_KMS("allocate payload parse length fail %d %d\n", idx, raw->curlen); |
| return false; |
| } |
| |
| static bool drm_dp_sideband_parse_query_payload_ack(struct drm_dp_sideband_msg_rx *raw, |
| struct drm_dp_sideband_msg_reply_body *repmsg) |
| { |
| int idx = 1; |
| |
| repmsg->u.query_payload.port_number = (raw->msg[idx] >> 4) & 0xf; |
| idx++; |
| if (idx > raw->curlen) |
| goto fail_len; |
| repmsg->u.query_payload.allocated_pbn = (raw->msg[idx] << 8) | (raw->msg[idx + 1]); |
| idx += 2; |
| if (idx > raw->curlen) |
| goto fail_len; |
| return true; |
| fail_len: |
| DRM_DEBUG_KMS("query payload parse length fail %d %d\n", idx, raw->curlen); |
| return false; |
| } |
| |
| static bool drm_dp_sideband_parse_power_updown_phy_ack(struct drm_dp_sideband_msg_rx *raw, |
| struct drm_dp_sideband_msg_reply_body *repmsg) |
| { |
| int idx = 1; |
| |
| repmsg->u.port_number.port_number = (raw->msg[idx] >> 4) & 0xf; |
| idx++; |
| if (idx > raw->curlen) { |
| DRM_DEBUG_KMS("power up/down phy parse length fail %d %d\n", |
| idx, raw->curlen); |
| return false; |
| } |
| return true; |
| } |
| |
| static bool |
| drm_dp_sideband_parse_query_stream_enc_status( |
| struct drm_dp_sideband_msg_rx *raw, |
| struct drm_dp_sideband_msg_reply_body *repmsg) |
| { |
| struct drm_dp_query_stream_enc_status_ack_reply *reply; |
| |
| reply = &repmsg->u.enc_status; |
| |
| reply->stream_id = raw->msg[3]; |
| |
| reply->reply_signed = raw->msg[2] & BIT(0); |
| |
| /* |
| * NOTE: It's my impression from reading the spec that the below parsing |
| * is correct. However I noticed while testing with an HDCP 1.4 display |
| * through an HDCP 2.2 hub that only bit 3 was set. In that case, I |
| * would expect both bits to be set. So keep the parsing following the |
| * spec, but beware reality might not match the spec (at least for some |
| * configurations). |
| */ |
| reply->hdcp_1x_device_present = raw->msg[2] & BIT(4); |
| reply->hdcp_2x_device_present = raw->msg[2] & BIT(3); |
| |
| reply->query_capable_device_present = raw->msg[2] & BIT(5); |
| reply->legacy_device_present = raw->msg[2] & BIT(6); |
| reply->unauthorizable_device_present = raw->msg[2] & BIT(7); |
| |
| reply->auth_completed = !!(raw->msg[1] & BIT(3)); |
| reply->encryption_enabled = !!(raw->msg[1] & BIT(4)); |
| reply->repeater_present = !!(raw->msg[1] & BIT(5)); |
| reply->state = (raw->msg[1] & GENMASK(7, 6)) >> 6; |
| |
| return true; |
| } |
| |
| static bool drm_dp_sideband_parse_reply(const struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_sideband_msg_rx *raw, |
| struct drm_dp_sideband_msg_reply_body *msg) |
| { |
| memset(msg, 0, sizeof(*msg)); |
| msg->reply_type = (raw->msg[0] & 0x80) >> 7; |
| msg->req_type = (raw->msg[0] & 0x7f); |
| |
| if (msg->reply_type == DP_SIDEBAND_REPLY_NAK) { |
| import_guid(&msg->u.nak.guid, &raw->msg[1]); |
| msg->u.nak.reason = raw->msg[17]; |
| msg->u.nak.nak_data = raw->msg[18]; |
| return false; |
| } |
| |
| switch (msg->req_type) { |
| case DP_LINK_ADDRESS: |
| return drm_dp_sideband_parse_link_address(mgr, raw, msg); |
| case DP_QUERY_PAYLOAD: |
| return drm_dp_sideband_parse_query_payload_ack(raw, msg); |
| case DP_REMOTE_DPCD_READ: |
| return drm_dp_sideband_parse_remote_dpcd_read(raw, msg); |
| case DP_REMOTE_DPCD_WRITE: |
| return drm_dp_sideband_parse_remote_dpcd_write(raw, msg); |
| case DP_REMOTE_I2C_READ: |
| return drm_dp_sideband_parse_remote_i2c_read_ack(raw, msg); |
| case DP_REMOTE_I2C_WRITE: |
| return true; /* since there's nothing to parse */ |
| case DP_ENUM_PATH_RESOURCES: |
| return drm_dp_sideband_parse_enum_path_resources_ack(raw, msg); |
| case DP_ALLOCATE_PAYLOAD: |
| return drm_dp_sideband_parse_allocate_payload_ack(raw, msg); |
| case DP_POWER_DOWN_PHY: |
| case DP_POWER_UP_PHY: |
| return drm_dp_sideband_parse_power_updown_phy_ack(raw, msg); |
| case DP_CLEAR_PAYLOAD_ID_TABLE: |
| return true; /* since there's nothing to parse */ |
| case DP_QUERY_STREAM_ENC_STATUS: |
| return drm_dp_sideband_parse_query_stream_enc_status(raw, msg); |
| default: |
| drm_err(mgr->dev, "Got unknown reply 0x%02x (%s)\n", |
| msg->req_type, drm_dp_mst_req_type_str(msg->req_type)); |
| return false; |
| } |
| } |
| |
| static bool |
| drm_dp_sideband_parse_connection_status_notify(const struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_sideband_msg_rx *raw, |
| struct drm_dp_sideband_msg_req_body *msg) |
| { |
| int idx = 1; |
| |
| msg->u.conn_stat.port_number = (raw->msg[idx] & 0xf0) >> 4; |
| idx++; |
| if (idx > raw->curlen) |
| goto fail_len; |
| |
| import_guid(&msg->u.conn_stat.guid, &raw->msg[idx]); |
| idx += 16; |
| if (idx > raw->curlen) |
| goto fail_len; |
| |
| msg->u.conn_stat.legacy_device_plug_status = (raw->msg[idx] >> 6) & 0x1; |
| msg->u.conn_stat.displayport_device_plug_status = (raw->msg[idx] >> 5) & 0x1; |
| msg->u.conn_stat.message_capability_status = (raw->msg[idx] >> 4) & 0x1; |
| msg->u.conn_stat.input_port = (raw->msg[idx] >> 3) & 0x1; |
| msg->u.conn_stat.peer_device_type = (raw->msg[idx] & 0x7); |
| idx++; |
| return true; |
| fail_len: |
| drm_dbg_kms(mgr->dev, "connection status reply parse length fail %d %d\n", |
| idx, raw->curlen); |
| return false; |
| } |
| |
| static bool drm_dp_sideband_parse_resource_status_notify(const struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_sideband_msg_rx *raw, |
| struct drm_dp_sideband_msg_req_body *msg) |
| { |
| int idx = 1; |
| |
| msg->u.resource_stat.port_number = (raw->msg[idx] & 0xf0) >> 4; |
| idx++; |
| if (idx > raw->curlen) |
| goto fail_len; |
| |
| import_guid(&msg->u.resource_stat.guid, &raw->msg[idx]); |
| idx += 16; |
| if (idx > raw->curlen) |
| goto fail_len; |
| |
| msg->u.resource_stat.available_pbn = (raw->msg[idx] << 8) | (raw->msg[idx + 1]); |
| idx++; |
| return true; |
| fail_len: |
| drm_dbg_kms(mgr->dev, "resource status reply parse length fail %d %d\n", idx, raw->curlen); |
| return false; |
| } |
| |
| static bool drm_dp_sideband_parse_req(const struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_sideband_msg_rx *raw, |
| struct drm_dp_sideband_msg_req_body *msg) |
| { |
| memset(msg, 0, sizeof(*msg)); |
| msg->req_type = (raw->msg[0] & 0x7f); |
| |
| switch (msg->req_type) { |
| case DP_CONNECTION_STATUS_NOTIFY: |
| return drm_dp_sideband_parse_connection_status_notify(mgr, raw, msg); |
| case DP_RESOURCE_STATUS_NOTIFY: |
| return drm_dp_sideband_parse_resource_status_notify(mgr, raw, msg); |
| default: |
| drm_err(mgr->dev, "Got unknown request 0x%02x (%s)\n", |
| msg->req_type, drm_dp_mst_req_type_str(msg->req_type)); |
| return false; |
| } |
| } |
| |
| static void build_dpcd_write(struct drm_dp_sideband_msg_tx *msg, |
| u8 port_num, u32 offset, u8 num_bytes, u8 *bytes) |
| { |
| struct drm_dp_sideband_msg_req_body req; |
| |
| req.req_type = DP_REMOTE_DPCD_WRITE; |
| req.u.dpcd_write.port_number = port_num; |
| req.u.dpcd_write.dpcd_address = offset; |
| req.u.dpcd_write.num_bytes = num_bytes; |
| req.u.dpcd_write.bytes = bytes; |
| drm_dp_encode_sideband_req(&req, msg); |
| } |
| |
| static void build_link_address(struct drm_dp_sideband_msg_tx *msg) |
| { |
| struct drm_dp_sideband_msg_req_body req; |
| |
| req.req_type = DP_LINK_ADDRESS; |
| drm_dp_encode_sideband_req(&req, msg); |
| } |
| |
| static void build_clear_payload_id_table(struct drm_dp_sideband_msg_tx *msg) |
| { |
| struct drm_dp_sideband_msg_req_body req; |
| |
| req.req_type = DP_CLEAR_PAYLOAD_ID_TABLE; |
| drm_dp_encode_sideband_req(&req, msg); |
| msg->path_msg = true; |
| } |
| |
| static int build_enum_path_resources(struct drm_dp_sideband_msg_tx *msg, |
| int port_num) |
| { |
| struct drm_dp_sideband_msg_req_body req; |
| |
| req.req_type = DP_ENUM_PATH_RESOURCES; |
| req.u.port_num.port_number = port_num; |
| drm_dp_encode_sideband_req(&req, msg); |
| msg->path_msg = true; |
| return 0; |
| } |
| |
| static void build_allocate_payload(struct drm_dp_sideband_msg_tx *msg, |
| int port_num, |
| u8 vcpi, uint16_t pbn, |
| u8 number_sdp_streams, |
| u8 *sdp_stream_sink) |
| { |
| struct drm_dp_sideband_msg_req_body req; |
| |
| memset(&req, 0, sizeof(req)); |
| req.req_type = DP_ALLOCATE_PAYLOAD; |
| req.u.allocate_payload.port_number = port_num; |
| req.u.allocate_payload.vcpi = vcpi; |
| req.u.allocate_payload.pbn = pbn; |
| req.u.allocate_payload.number_sdp_streams = number_sdp_streams; |
| memcpy(req.u.allocate_payload.sdp_stream_sink, sdp_stream_sink, |
| number_sdp_streams); |
| drm_dp_encode_sideband_req(&req, msg); |
| msg->path_msg = true; |
| } |
| |
| static void build_power_updown_phy(struct drm_dp_sideband_msg_tx *msg, |
| int port_num, bool power_up) |
| { |
| struct drm_dp_sideband_msg_req_body req; |
| |
| if (power_up) |
| req.req_type = DP_POWER_UP_PHY; |
| else |
| req.req_type = DP_POWER_DOWN_PHY; |
| |
| req.u.port_num.port_number = port_num; |
| drm_dp_encode_sideband_req(&req, msg); |
| msg->path_msg = true; |
| } |
| |
| static int |
| build_query_stream_enc_status(struct drm_dp_sideband_msg_tx *msg, u8 stream_id, |
| u8 *q_id) |
| { |
| struct drm_dp_sideband_msg_req_body req; |
| |
| req.req_type = DP_QUERY_STREAM_ENC_STATUS; |
| req.u.enc_status.stream_id = stream_id; |
| memcpy(req.u.enc_status.client_id, q_id, |
| sizeof(req.u.enc_status.client_id)); |
| req.u.enc_status.stream_event = 0; |
| req.u.enc_status.valid_stream_event = false; |
| req.u.enc_status.stream_behavior = 0; |
| req.u.enc_status.valid_stream_behavior = false; |
| |
| drm_dp_encode_sideband_req(&req, msg); |
| return 0; |
| } |
| |
| static bool check_txmsg_state(struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_sideband_msg_tx *txmsg) |
| { |
| unsigned int state; |
| |
| /* |
| * All updates to txmsg->state are protected by mgr->qlock, and the two |
| * cases we check here are terminal states. For those the barriers |
| * provided by the wake_up/wait_event pair are enough. |
| */ |
| state = READ_ONCE(txmsg->state); |
| return (state == DRM_DP_SIDEBAND_TX_RX || |
| state == DRM_DP_SIDEBAND_TX_TIMEOUT); |
| } |
| |
| static int drm_dp_mst_wait_tx_reply(struct drm_dp_mst_branch *mstb, |
| struct drm_dp_sideband_msg_tx *txmsg) |
| { |
| struct drm_dp_mst_topology_mgr *mgr = mstb->mgr; |
| unsigned long wait_timeout = msecs_to_jiffies(4000); |
| unsigned long wait_expires = jiffies + wait_timeout; |
| int ret; |
| |
| for (;;) { |
| /* |
| * If the driver provides a way for this, change to |
| * poll-waiting for the MST reply interrupt if we didn't receive |
| * it for 50 msec. This would cater for cases where the HPD |
| * pulse signal got lost somewhere, even though the sink raised |
| * the corresponding MST interrupt correctly. One example is the |
| * Club 3D CAC-1557 TypeC -> DP adapter which for some reason |
| * filters out short pulses with a duration less than ~540 usec. |
| * |
| * The poll period is 50 msec to avoid missing an interrupt |
| * after the sink has cleared it (after a 110msec timeout |
| * since it raised the interrupt). |
| */ |
| ret = wait_event_timeout(mgr->tx_waitq, |
| check_txmsg_state(mgr, txmsg), |
| mgr->cbs->poll_hpd_irq ? |
| msecs_to_jiffies(50) : |
| wait_timeout); |
| |
| if (ret || !mgr->cbs->poll_hpd_irq || |
| time_after(jiffies, wait_expires)) |
| break; |
| |
| mgr->cbs->poll_hpd_irq(mgr); |
| } |
| |
| mutex_lock(&mgr->qlock); |
| if (ret > 0) { |
| if (txmsg->state == DRM_DP_SIDEBAND_TX_TIMEOUT) { |
| ret = -EIO; |
| goto out; |
| } |
| } else { |
| drm_dbg_kms(mgr->dev, "timedout msg send %p %d %d\n", |
| txmsg, txmsg->state, txmsg->seqno); |
| |
| /* dump some state */ |
| ret = -EIO; |
| |
| /* remove from q */ |
| if (txmsg->state == DRM_DP_SIDEBAND_TX_QUEUED || |
| txmsg->state == DRM_DP_SIDEBAND_TX_START_SEND || |
| txmsg->state == DRM_DP_SIDEBAND_TX_SENT) |
| list_del(&txmsg->next); |
| } |
| out: |
| if (unlikely(ret == -EIO) && drm_debug_enabled(DRM_UT_DP)) { |
| struct drm_printer p = drm_dbg_printer(mgr->dev, DRM_UT_DP, |
| DBG_PREFIX); |
| |
| drm_dp_mst_dump_sideband_msg_tx(&p, txmsg); |
| } |
| mutex_unlock(&mgr->qlock); |
| |
| drm_dp_mst_kick_tx(mgr); |
| return ret; |
| } |
| |
| static struct drm_dp_mst_branch *drm_dp_add_mst_branch_device(u8 lct, u8 *rad) |
| { |
| struct drm_dp_mst_branch *mstb; |
| |
| mstb = kzalloc(sizeof(*mstb), GFP_KERNEL); |
| if (!mstb) |
| return NULL; |
| |
| mstb->lct = lct; |
| if (lct > 1) |
| memcpy(mstb->rad, rad, lct / 2); |
| INIT_LIST_HEAD(&mstb->ports); |
| kref_init(&mstb->topology_kref); |
| kref_init(&mstb->malloc_kref); |
| return mstb; |
| } |
| |
| static void drm_dp_free_mst_branch_device(struct kref *kref) |
| { |
| struct drm_dp_mst_branch *mstb = |
| container_of(kref, struct drm_dp_mst_branch, malloc_kref); |
| |
| if (mstb->port_parent) |
| drm_dp_mst_put_port_malloc(mstb->port_parent); |
| |
| kfree(mstb); |
| } |
| |
| /** |
| * DOC: Branch device and port refcounting |
| * |
| * Topology refcount overview |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| * |
| * The refcounting schemes for &struct drm_dp_mst_branch and &struct |
| * drm_dp_mst_port are somewhat unusual. Both ports and branch devices have |
| * two different kinds of refcounts: topology refcounts, and malloc refcounts. |
| * |
| * Topology refcounts are not exposed to drivers, and are handled internally |
| * by the DP MST helpers. The helpers use them in order to prevent the |
| * in-memory topology state from being changed in the middle of critical |
| * operations like changing the internal state of payload allocations. This |
| * means each branch and port will be considered to be connected to the rest |
| * of the topology until its topology refcount reaches zero. Additionally, |
| * for ports this means that their associated &struct drm_connector will stay |
| * registered with userspace until the port's refcount reaches 0. |
| * |
| * Malloc refcount overview |
| * ~~~~~~~~~~~~~~~~~~~~~~~~ |
| * |
| * Malloc references are used to keep a &struct drm_dp_mst_port or &struct |
| * drm_dp_mst_branch allocated even after all of its topology references have |
| * been dropped, so that the driver or MST helpers can safely access each |
| * branch's last known state before it was disconnected from the topology. |
| * When the malloc refcount of a port or branch reaches 0, the memory |
| * allocation containing the &struct drm_dp_mst_branch or &struct |
| * drm_dp_mst_port respectively will be freed. |
| * |
| * For &struct drm_dp_mst_branch, malloc refcounts are not currently exposed |
| * to drivers. As of writing this documentation, there are no drivers that |
| * have a usecase for accessing &struct drm_dp_mst_branch outside of the MST |
| * helpers. Exposing this API to drivers in a race-free manner would take more |
| * tweaking of the refcounting scheme, however patches are welcome provided |
| * there is a legitimate driver usecase for this. |
| * |
| * Refcount relationships in a topology |
| * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| * |
| * Let's take a look at why the relationship between topology and malloc |
| * refcounts is designed the way it is. |
| * |
| * .. kernel-figure:: dp-mst/topology-figure-1.dot |
| * |
| * An example of topology and malloc refs in a DP MST topology with two |
| * active payloads. Topology refcount increments are indicated by solid |
| * lines, and malloc refcount increments are indicated by dashed lines. |
| * Each starts from the branch which incremented the refcount, and ends at |
| * the branch to which the refcount belongs to, i.e. the arrow points the |
| * same way as the C pointers used to reference a structure. |
| * |
| * As you can see in the above figure, every branch increments the topology |
| * refcount of its children, and increments the malloc refcount of its |
| * parent. Additionally, every payload increments the malloc refcount of its |
| * assigned port by 1. |
| * |
| * So, what would happen if MSTB #3 from the above figure was unplugged from |
| * the system, but the driver hadn't yet removed payload #2 from port #3? The |
| * topology would start to look like the figure below. |
| * |
| * .. kernel-figure:: dp-mst/topology-figure-2.dot |
| * |
| * Ports and branch devices which have been released from memory are |
| * colored grey, and references which have been removed are colored red. |
| * |
| * Whenever a port or branch device's topology refcount reaches zero, it will |
| * decrement the topology refcounts of all its children, the malloc refcount |
| * of its parent, and finally its own malloc refcount. For MSTB #4 and port |
| * #4, this means they both have been disconnected from the topology and freed |
| * from memory. But, because payload #2 is still holding a reference to port |
| * #3, port #3 is removed from the topology but its &struct drm_dp_mst_port |
| * is still accessible from memory. This also means port #3 has not yet |
| * decremented the malloc refcount of MSTB #3, so its &struct |
| * drm_dp_mst_branch will also stay allocated in memory until port #3's |
| * malloc refcount reaches 0. |
| * |
| * This relationship is necessary because in order to release payload #2, we |
| * need to be able to figure out the last relative of port #3 that's still |
| * connected to the topology. In this case, we would travel up the topology as |
| * shown below. |
| * |
| * .. kernel-figure:: dp-mst/topology-figure-3.dot |
| * |
| * And finally, remove payload #2 by communicating with port #2 through |
| * sideband transactions. |
| */ |
| |
| /** |
| * drm_dp_mst_get_mstb_malloc() - Increment the malloc refcount of a branch |
| * device |
| * @mstb: The &struct drm_dp_mst_branch to increment the malloc refcount of |
| * |
| * Increments &drm_dp_mst_branch.malloc_kref. When |
| * &drm_dp_mst_branch.malloc_kref reaches 0, the memory allocation for @mstb |
| * will be released and @mstb may no longer be used. |
| * |
| * See also: drm_dp_mst_put_mstb_malloc() |
| */ |
| static void |
| drm_dp_mst_get_mstb_malloc(struct drm_dp_mst_branch *mstb) |
| { |
| kref_get(&mstb->malloc_kref); |
| drm_dbg(mstb->mgr->dev, "mstb %p (%d)\n", mstb, kref_read(&mstb->malloc_kref)); |
| } |
| |
| /** |
| * drm_dp_mst_put_mstb_malloc() - Decrement the malloc refcount of a branch |
| * device |
| * @mstb: The &struct drm_dp_mst_branch to decrement the malloc refcount of |
| * |
| * Decrements &drm_dp_mst_branch.malloc_kref. When |
| * &drm_dp_mst_branch.malloc_kref reaches 0, the memory allocation for @mstb |
| * will be released and @mstb may no longer be used. |
| * |
| * See also: drm_dp_mst_get_mstb_malloc() |
| */ |
| static void |
| drm_dp_mst_put_mstb_malloc(struct drm_dp_mst_branch *mstb) |
| { |
| drm_dbg(mstb->mgr->dev, "mstb %p (%d)\n", mstb, kref_read(&mstb->malloc_kref) - 1); |
| kref_put(&mstb->malloc_kref, drm_dp_free_mst_branch_device); |
| } |
| |
| static void drm_dp_free_mst_port(struct kref *kref) |
| { |
| struct drm_dp_mst_port *port = |
| container_of(kref, struct drm_dp_mst_port, malloc_kref); |
| |
| drm_dp_mst_put_mstb_malloc(port->parent); |
| kfree(port); |
| } |
| |
| /** |
| * drm_dp_mst_get_port_malloc() - Increment the malloc refcount of an MST port |
| * @port: The &struct drm_dp_mst_port to increment the malloc refcount of |
| * |
| * Increments &drm_dp_mst_port.malloc_kref. When &drm_dp_mst_port.malloc_kref |
| * reaches 0, the memory allocation for @port will be released and @port may |
| * no longer be used. |
| * |
| * Because @port could potentially be freed at any time by the DP MST helpers |
| * if &drm_dp_mst_port.malloc_kref reaches 0, including during a call to this |
| * function, drivers that which to make use of &struct drm_dp_mst_port should |
| * ensure that they grab at least one main malloc reference to their MST ports |
| * in &drm_dp_mst_topology_cbs.add_connector. This callback is called before |
| * there is any chance for &drm_dp_mst_port.malloc_kref to reach 0. |
| * |
| * See also: drm_dp_mst_put_port_malloc() |
| */ |
| void |
| drm_dp_mst_get_port_malloc(struct drm_dp_mst_port *port) |
| { |
| kref_get(&port->malloc_kref); |
| drm_dbg(port->mgr->dev, "port %p (%d)\n", port, kref_read(&port->malloc_kref)); |
| } |
| EXPORT_SYMBOL(drm_dp_mst_get_port_malloc); |
| |
| /** |
| * drm_dp_mst_put_port_malloc() - Decrement the malloc refcount of an MST port |
| * @port: The &struct drm_dp_mst_port to decrement the malloc refcount of |
| * |
| * Decrements &drm_dp_mst_port.malloc_kref. When &drm_dp_mst_port.malloc_kref |
| * reaches 0, the memory allocation for @port will be released and @port may |
| * no longer be used. |
| * |
| * See also: drm_dp_mst_get_port_malloc() |
| */ |
| void |
| drm_dp_mst_put_port_malloc(struct drm_dp_mst_port *port) |
| { |
| drm_dbg(port->mgr->dev, "port %p (%d)\n", port, kref_read(&port->malloc_kref) - 1); |
| kref_put(&port->malloc_kref, drm_dp_free_mst_port); |
| } |
| EXPORT_SYMBOL(drm_dp_mst_put_port_malloc); |
| |
| #if IS_ENABLED(CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS) |
| |
| #define STACK_DEPTH 8 |
| |
| static noinline void |
| __topology_ref_save(struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_topology_ref_history *history, |
| enum drm_dp_mst_topology_ref_type type) |
| { |
| struct drm_dp_mst_topology_ref_entry *entry = NULL; |
| depot_stack_handle_t backtrace; |
| ulong stack_entries[STACK_DEPTH]; |
| uint n; |
| int i; |
| |
| n = stack_trace_save(stack_entries, ARRAY_SIZE(stack_entries), 1); |
| backtrace = stack_depot_save(stack_entries, n, GFP_KERNEL); |
| if (!backtrace) |
| return; |
| |
| /* Try to find an existing entry for this backtrace */ |
| for (i = 0; i < history->len; i++) { |
| if (history->entries[i].backtrace == backtrace) { |
| entry = &history->entries[i]; |
| break; |
| } |
| } |
| |
| /* Otherwise add one */ |
| if (!entry) { |
| struct drm_dp_mst_topology_ref_entry *new; |
| int new_len = history->len + 1; |
| |
| new = krealloc(history->entries, sizeof(*new) * new_len, |
| GFP_KERNEL); |
| if (!new) |
| return; |
| |
| entry = &new[history->len]; |
| history->len = new_len; |
| history->entries = new; |
| |
| entry->backtrace = backtrace; |
| entry->type = type; |
| entry->count = 0; |
| } |
| entry->count++; |
| entry->ts_nsec = ktime_get_ns(); |
| } |
| |
| static int |
| topology_ref_history_cmp(const void *a, const void *b) |
| { |
| const struct drm_dp_mst_topology_ref_entry *entry_a = a, *entry_b = b; |
| |
| if (entry_a->ts_nsec > entry_b->ts_nsec) |
| return 1; |
| else if (entry_a->ts_nsec < entry_b->ts_nsec) |
| return -1; |
| else |
| return 0; |
| } |
| |
| static inline const char * |
| topology_ref_type_to_str(enum drm_dp_mst_topology_ref_type type) |
| { |
| if (type == DRM_DP_MST_TOPOLOGY_REF_GET) |
| return "get"; |
| else |
| return "put"; |
| } |
| |
| static void |
| __dump_topology_ref_history(struct drm_device *drm, |
| struct drm_dp_mst_topology_ref_history *history, |
| void *ptr, const char *type_str) |
| { |
| struct drm_printer p = drm_dbg_printer(drm, DRM_UT_DP, DBG_PREFIX); |
| char *buf = kzalloc(PAGE_SIZE, GFP_KERNEL); |
| int i; |
| |
| if (!buf) |
| return; |
| |
| if (!history->len) |
| goto out; |
| |
| /* First, sort the list so that it goes from oldest to newest |
| * reference entry |
| */ |
| sort(history->entries, history->len, sizeof(*history->entries), |
| topology_ref_history_cmp, NULL); |
| |
| drm_printf(&p, "%s (%p) topology count reached 0, dumping history:\n", |
| type_str, ptr); |
| |
| for (i = 0; i < history->len; i++) { |
| const struct drm_dp_mst_topology_ref_entry *entry = |
| &history->entries[i]; |
| u64 ts_nsec = entry->ts_nsec; |
| u32 rem_nsec = do_div(ts_nsec, 1000000000); |
| |
| stack_depot_snprint(entry->backtrace, buf, PAGE_SIZE, 4); |
| |
| drm_printf(&p, " %d %ss (last at %5llu.%06u):\n%s", |
| entry->count, |
| topology_ref_type_to_str(entry->type), |
| ts_nsec, rem_nsec / 1000, buf); |
| } |
| |
| /* Now free the history, since this is the only time we expose it */ |
| kfree(history->entries); |
| out: |
| kfree(buf); |
| } |
| |
| static __always_inline void |
| drm_dp_mst_dump_mstb_topology_history(struct drm_dp_mst_branch *mstb) |
| { |
| __dump_topology_ref_history(mstb->mgr->dev, &mstb->topology_ref_history, |
| mstb, "MSTB"); |
| } |
| |
| static __always_inline void |
| drm_dp_mst_dump_port_topology_history(struct drm_dp_mst_port *port) |
| { |
| __dump_topology_ref_history(port->mgr->dev, &port->topology_ref_history, |
| port, "Port"); |
| } |
| |
| static __always_inline void |
| save_mstb_topology_ref(struct drm_dp_mst_branch *mstb, |
| enum drm_dp_mst_topology_ref_type type) |
| { |
| __topology_ref_save(mstb->mgr, &mstb->topology_ref_history, type); |
| } |
| |
| static __always_inline void |
| save_port_topology_ref(struct drm_dp_mst_port *port, |
| enum drm_dp_mst_topology_ref_type type) |
| { |
| __topology_ref_save(port->mgr, &port->topology_ref_history, type); |
| } |
| |
| static inline void |
| topology_ref_history_lock(struct drm_dp_mst_topology_mgr *mgr) |
| { |
| mutex_lock(&mgr->topology_ref_history_lock); |
| } |
| |
| static inline void |
| topology_ref_history_unlock(struct drm_dp_mst_topology_mgr *mgr) |
| { |
| mutex_unlock(&mgr->topology_ref_history_lock); |
| } |
| #else |
| static inline void |
| topology_ref_history_lock(struct drm_dp_mst_topology_mgr *mgr) {} |
| static inline void |
| topology_ref_history_unlock(struct drm_dp_mst_topology_mgr *mgr) {} |
| static inline void |
| drm_dp_mst_dump_mstb_topology_history(struct drm_dp_mst_branch *mstb) {} |
| static inline void |
| drm_dp_mst_dump_port_topology_history(struct drm_dp_mst_port *port) {} |
| #define save_mstb_topology_ref(mstb, type) |
| #define save_port_topology_ref(port, type) |
| #endif |
| |
| struct drm_dp_mst_atomic_payload * |
| drm_atomic_get_mst_payload_state(struct drm_dp_mst_topology_state *state, |
| struct drm_dp_mst_port *port) |
| { |
| struct drm_dp_mst_atomic_payload *payload; |
| |
| list_for_each_entry(payload, &state->payloads, next) |
| if (payload->port == port) |
| return payload; |
| |
| return NULL; |
| } |
| EXPORT_SYMBOL(drm_atomic_get_mst_payload_state); |
| |
| static void drm_dp_destroy_mst_branch_device(struct kref *kref) |
| { |
| struct drm_dp_mst_branch *mstb = |
| container_of(kref, struct drm_dp_mst_branch, topology_kref); |
| struct drm_dp_mst_topology_mgr *mgr = mstb->mgr; |
| |
| drm_dp_mst_dump_mstb_topology_history(mstb); |
| |
| INIT_LIST_HEAD(&mstb->destroy_next); |
| |
| /* |
| * This can get called under mgr->mutex, so we need to perform the |
| * actual destruction of the mstb in another worker |
| */ |
| mutex_lock(&mgr->delayed_destroy_lock); |
| list_add(&mstb->destroy_next, &mgr->destroy_branch_device_list); |
| mutex_unlock(&mgr->delayed_destroy_lock); |
| queue_work(mgr->delayed_destroy_wq, &mgr->delayed_destroy_work); |
| } |
| |
| /** |
| * drm_dp_mst_topology_try_get_mstb() - Increment the topology refcount of a |
| * branch device unless it's zero |
| * @mstb: &struct drm_dp_mst_branch to increment the topology refcount of |
| * |
| * Attempts to grab a topology reference to @mstb, if it hasn't yet been |
| * removed from the topology (e.g. &drm_dp_mst_branch.topology_kref has |
| * reached 0). Holding a topology reference implies that a malloc reference |
| * will be held to @mstb as long as the user holds the topology reference. |
| * |
| * Care should be taken to ensure that the user has at least one malloc |
| * reference to @mstb. If you already have a topology reference to @mstb, you |
| * should use drm_dp_mst_topology_get_mstb() instead. |
| * |
| * See also: |
| * drm_dp_mst_topology_get_mstb() |
| * drm_dp_mst_topology_put_mstb() |
| * |
| * Returns: |
| * * 1: A topology reference was grabbed successfully |
| * * 0: @port is no longer in the topology, no reference was grabbed |
| */ |
| static int __must_check |
| drm_dp_mst_topology_try_get_mstb(struct drm_dp_mst_branch *mstb) |
| { |
| int ret; |
| |
| topology_ref_history_lock(mstb->mgr); |
| ret = kref_get_unless_zero(&mstb->topology_kref); |
| if (ret) { |
| drm_dbg(mstb->mgr->dev, "mstb %p (%d)\n", mstb, kref_read(&mstb->topology_kref)); |
| save_mstb_topology_ref(mstb, DRM_DP_MST_TOPOLOGY_REF_GET); |
| } |
| |
| topology_ref_history_unlock(mstb->mgr); |
| |
| return ret; |
| } |
| |
| /** |
| * drm_dp_mst_topology_get_mstb() - Increment the topology refcount of a |
| * branch device |
| * @mstb: The &struct drm_dp_mst_branch to increment the topology refcount of |
| * |
| * Increments &drm_dp_mst_branch.topology_refcount without checking whether or |
| * not it's already reached 0. This is only valid to use in scenarios where |
| * you are already guaranteed to have at least one active topology reference |
| * to @mstb. Otherwise, drm_dp_mst_topology_try_get_mstb() must be used. |
| * |
| * See also: |
| * drm_dp_mst_topology_try_get_mstb() |
| * drm_dp_mst_topology_put_mstb() |
| */ |
| static void drm_dp_mst_topology_get_mstb(struct drm_dp_mst_branch *mstb) |
| { |
| topology_ref_history_lock(mstb->mgr); |
| |
| save_mstb_topology_ref(mstb, DRM_DP_MST_TOPOLOGY_REF_GET); |
| WARN_ON(kref_read(&mstb->topology_kref) == 0); |
| kref_get(&mstb->topology_kref); |
| drm_dbg(mstb->mgr->dev, "mstb %p (%d)\n", mstb, kref_read(&mstb->topology_kref)); |
| |
| topology_ref_history_unlock(mstb->mgr); |
| } |
| |
| /** |
| * drm_dp_mst_topology_put_mstb() - release a topology reference to a branch |
| * device |
| * @mstb: The &struct drm_dp_mst_branch to release the topology reference from |
| * |
| * Releases a topology reference from @mstb by decrementing |
| * &drm_dp_mst_branch.topology_kref. |
| * |
| * See also: |
| * drm_dp_mst_topology_try_get_mstb() |
| * drm_dp_mst_topology_get_mstb() |
| */ |
| static void |
| drm_dp_mst_topology_put_mstb(struct drm_dp_mst_branch *mstb) |
| { |
| topology_ref_history_lock(mstb->mgr); |
| |
| drm_dbg(mstb->mgr->dev, "mstb %p (%d)\n", mstb, kref_read(&mstb->topology_kref) - 1); |
| save_mstb_topology_ref(mstb, DRM_DP_MST_TOPOLOGY_REF_PUT); |
| |
| topology_ref_history_unlock(mstb->mgr); |
| kref_put(&mstb->topology_kref, drm_dp_destroy_mst_branch_device); |
| } |
| |
| static void drm_dp_destroy_port(struct kref *kref) |
| { |
| struct drm_dp_mst_port *port = |
| container_of(kref, struct drm_dp_mst_port, topology_kref); |
| struct drm_dp_mst_topology_mgr *mgr = port->mgr; |
| |
| drm_dp_mst_dump_port_topology_history(port); |
| |
| /* There's nothing that needs locking to destroy an input port yet */ |
| if (port->input) { |
| drm_dp_mst_put_port_malloc(port); |
| return; |
| } |
| |
| drm_edid_free(port->cached_edid); |
| |
| /* |
| * we can't destroy the connector here, as we might be holding the |
| * mode_config.mutex from an EDID retrieval |
| */ |
| mutex_lock(&mgr->delayed_destroy_lock); |
| list_add(&port->next, &mgr->destroy_port_list); |
| mutex_unlock(&mgr->delayed_destroy_lock); |
| queue_work(mgr->delayed_destroy_wq, &mgr->delayed_destroy_work); |
| } |
| |
| /** |
| * drm_dp_mst_topology_try_get_port() - Increment the topology refcount of a |
| * port unless it's zero |
| * @port: &struct drm_dp_mst_port to increment the topology refcount of |
| * |
| * Attempts to grab a topology reference to @port, if it hasn't yet been |
| * removed from the topology (e.g. &drm_dp_mst_port.topology_kref has reached |
| * 0). Holding a topology reference implies that a malloc reference will be |
| * held to @port as long as the user holds the topology reference. |
| * |
| * Care should be taken to ensure that the user has at least one malloc |
| * reference to @port. If you already have a topology reference to @port, you |
| * should use drm_dp_mst_topology_get_port() instead. |
| * |
| * See also: |
| * drm_dp_mst_topology_get_port() |
| * drm_dp_mst_topology_put_port() |
| * |
| * Returns: |
| * * 1: A topology reference was grabbed successfully |
| * * 0: @port is no longer in the topology, no reference was grabbed |
| */ |
| static int __must_check |
| drm_dp_mst_topology_try_get_port(struct drm_dp_mst_port *port) |
| { |
| int ret; |
| |
| topology_ref_history_lock(port->mgr); |
| ret = kref_get_unless_zero(&port->topology_kref); |
| if (ret) { |
| drm_dbg(port->mgr->dev, "port %p (%d)\n", port, kref_read(&port->topology_kref)); |
| save_port_topology_ref(port, DRM_DP_MST_TOPOLOGY_REF_GET); |
| } |
| |
| topology_ref_history_unlock(port->mgr); |
| return ret; |
| } |
| |
| /** |
| * drm_dp_mst_topology_get_port() - Increment the topology refcount of a port |
| * @port: The &struct drm_dp_mst_port to increment the topology refcount of |
| * |
| * Increments &drm_dp_mst_port.topology_refcount without checking whether or |
| * not it's already reached 0. This is only valid to use in scenarios where |
| * you are already guaranteed to have at least one active topology reference |
| * to @port. Otherwise, drm_dp_mst_topology_try_get_port() must be used. |
| * |
| * See also: |
| * drm_dp_mst_topology_try_get_port() |
| * drm_dp_mst_topology_put_port() |
| */ |
| static void drm_dp_mst_topology_get_port(struct drm_dp_mst_port *port) |
| { |
| topology_ref_history_lock(port->mgr); |
| |
| WARN_ON(kref_read(&port->topology_kref) == 0); |
| kref_get(&port->topology_kref); |
| drm_dbg(port->mgr->dev, "port %p (%d)\n", port, kref_read(&port->topology_kref)); |
| save_port_topology_ref(port, DRM_DP_MST_TOPOLOGY_REF_GET); |
| |
| topology_ref_history_unlock(port->mgr); |
| } |
| |
| /** |
| * drm_dp_mst_topology_put_port() - release a topology reference to a port |
| * @port: The &struct drm_dp_mst_port to release the topology reference from |
| * |
| * Releases a topology reference from @port by decrementing |
| * &drm_dp_mst_port.topology_kref. |
| * |
| * See also: |
| * drm_dp_mst_topology_try_get_port() |
| * drm_dp_mst_topology_get_port() |
| */ |
| static void drm_dp_mst_topology_put_port(struct drm_dp_mst_port *port) |
| { |
| topology_ref_history_lock(port->mgr); |
| |
| drm_dbg(port->mgr->dev, "port %p (%d)\n", port, kref_read(&port->topology_kref) - 1); |
| save_port_topology_ref(port, DRM_DP_MST_TOPOLOGY_REF_PUT); |
| |
| topology_ref_history_unlock(port->mgr); |
| kref_put(&port->topology_kref, drm_dp_destroy_port); |
| } |
| |
| static struct drm_dp_mst_branch * |
| drm_dp_mst_topology_get_mstb_validated_locked(struct drm_dp_mst_branch *mstb, |
| struct drm_dp_mst_branch *to_find) |
| { |
| struct drm_dp_mst_port *port; |
| struct drm_dp_mst_branch *rmstb; |
| |
| if (to_find == mstb) |
| return mstb; |
| |
| list_for_each_entry(port, &mstb->ports, next) { |
| if (port->mstb) { |
| rmstb = drm_dp_mst_topology_get_mstb_validated_locked( |
| port->mstb, to_find); |
| if (rmstb) |
| return rmstb; |
| } |
| } |
| return NULL; |
| } |
| |
| static struct drm_dp_mst_branch * |
| drm_dp_mst_topology_get_mstb_validated(struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_branch *mstb) |
| { |
| struct drm_dp_mst_branch *rmstb = NULL; |
| |
| mutex_lock(&mgr->lock); |
| if (mgr->mst_primary) { |
| rmstb = drm_dp_mst_topology_get_mstb_validated_locked( |
| mgr->mst_primary, mstb); |
| |
| if (rmstb && !drm_dp_mst_topology_try_get_mstb(rmstb)) |
| rmstb = NULL; |
| } |
| mutex_unlock(&mgr->lock); |
| return rmstb; |
| } |
| |
| static struct drm_dp_mst_port * |
| drm_dp_mst_topology_get_port_validated_locked(struct drm_dp_mst_branch *mstb, |
| struct drm_dp_mst_port *to_find) |
| { |
| struct drm_dp_mst_port *port, *mport; |
| |
| list_for_each_entry(port, &mstb->ports, next) { |
| if (port == to_find) |
| return port; |
| |
| if (port->mstb) { |
| mport = drm_dp_mst_topology_get_port_validated_locked( |
| port->mstb, to_find); |
| if (mport) |
| return mport; |
| } |
| } |
| return NULL; |
| } |
| |
| static struct drm_dp_mst_port * |
| drm_dp_mst_topology_get_port_validated(struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_port *port) |
| { |
| struct drm_dp_mst_port *rport = NULL; |
| |
| mutex_lock(&mgr->lock); |
| if (mgr->mst_primary) { |
| rport = drm_dp_mst_topology_get_port_validated_locked( |
| mgr->mst_primary, port); |
| |
| if (rport && !drm_dp_mst_topology_try_get_port(rport)) |
| rport = NULL; |
| } |
| mutex_unlock(&mgr->lock); |
| return rport; |
| } |
| |
| static struct drm_dp_mst_port *drm_dp_get_port(struct drm_dp_mst_branch *mstb, u8 port_num) |
| { |
| struct drm_dp_mst_port *port; |
| int ret; |
| |
| list_for_each_entry(port, &mstb->ports, next) { |
| if (port->port_num == port_num) { |
| ret = drm_dp_mst_topology_try_get_port(port); |
| return ret ? port : NULL; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| /* |
| * calculate a new RAD for this MST branch device |
| * if parent has an LCT of 2 then it has 1 nibble of RAD, |
| * if parent has an LCT of 3 then it has 2 nibbles of RAD, |
| */ |
| static u8 drm_dp_calculate_rad(struct drm_dp_mst_port *port, |
| u8 *rad) |
| { |
| int parent_lct = port->parent->lct; |
| int shift = 4; |
| int idx = (parent_lct - 1) / 2; |
| |
| if (parent_lct > 1) { |
| memcpy(rad, port->parent->rad, idx + 1); |
| shift = (parent_lct % 2) ? 4 : 0; |
| } else |
| rad[0] = 0; |
| |
| rad[idx] |= port->port_num << shift; |
| return parent_lct + 1; |
| } |
| |
| static bool drm_dp_mst_is_end_device(u8 pdt, bool mcs) |
| { |
| switch (pdt) { |
| case DP_PEER_DEVICE_DP_LEGACY_CONV: |
| case DP_PEER_DEVICE_SST_SINK: |
| return true; |
| case DP_PEER_DEVICE_MST_BRANCHING: |
| /* For sst branch device */ |
| if (!mcs) |
| return true; |
| |
| return false; |
| } |
| return true; |
| } |
| |
| static int |
| drm_dp_port_set_pdt(struct drm_dp_mst_port *port, u8 new_pdt, |
| bool new_mcs) |
| { |
| struct drm_dp_mst_topology_mgr *mgr = port->mgr; |
| struct drm_dp_mst_branch *mstb; |
| u8 rad[8], lct; |
| int ret = 0; |
| |
| if (port->pdt == new_pdt && port->mcs == new_mcs) |
| return 0; |
| |
| /* Teardown the old pdt, if there is one */ |
| if (port->pdt != DP_PEER_DEVICE_NONE) { |
| if (drm_dp_mst_is_end_device(port->pdt, port->mcs)) { |
| /* |
| * If the new PDT would also have an i2c bus, |
| * don't bother with reregistering it |
| */ |
| if (new_pdt != DP_PEER_DEVICE_NONE && |
| drm_dp_mst_is_end_device(new_pdt, new_mcs)) { |
| port->pdt = new_pdt; |
| port->mcs = new_mcs; |
| return 0; |
| } |
| |
| /* remove i2c over sideband */ |
| drm_dp_mst_unregister_i2c_bus(port); |
| } else { |
| mutex_lock(&mgr->lock); |
| drm_dp_mst_topology_put_mstb(port->mstb); |
| port->mstb = NULL; |
| mutex_unlock(&mgr->lock); |
| } |
| } |
| |
| port->pdt = new_pdt; |
| port->mcs = new_mcs; |
| |
| if (port->pdt != DP_PEER_DEVICE_NONE) { |
| if (drm_dp_mst_is_end_device(port->pdt, port->mcs)) { |
| /* add i2c over sideband */ |
| ret = drm_dp_mst_register_i2c_bus(port); |
| } else { |
| lct = drm_dp_calculate_rad(port, rad); |
| mstb = drm_dp_add_mst_branch_device(lct, rad); |
| if (!mstb) { |
| ret = -ENOMEM; |
| drm_err(mgr->dev, "Failed to create MSTB for port %p", port); |
| goto out; |
| } |
| |
| mutex_lock(&mgr->lock); |
| port->mstb = mstb; |
| mstb->mgr = port->mgr; |
| mstb->port_parent = port; |
| |
| /* |
| * Make sure this port's memory allocation stays |
| * around until its child MSTB releases it |
| */ |
| drm_dp_mst_get_port_malloc(port); |
| mutex_unlock(&mgr->lock); |
| |
| /* And make sure we send a link address for this */ |
| ret = 1; |
| } |
| } |
| |
| out: |
| if (ret < 0) |
| port->pdt = DP_PEER_DEVICE_NONE; |
| return ret; |
| } |
| |
| /** |
| * drm_dp_mst_dpcd_read() - read a series of bytes from the DPCD via sideband |
| * @aux: Fake sideband AUX CH |
| * @offset: address of the (first) register to read |
| * @buffer: buffer to store the register values |
| * @size: number of bytes in @buffer |
| * |
| * Performs the same functionality for remote devices via |
| * sideband messaging as drm_dp_dpcd_read() does for local |
| * devices via actual AUX CH. |
| * |
| * Return: Number of bytes read, or negative error code on failure. |
| */ |
| ssize_t drm_dp_mst_dpcd_read(struct drm_dp_aux *aux, |
| unsigned int offset, void *buffer, size_t size) |
| { |
| struct drm_dp_mst_port *port = container_of(aux, struct drm_dp_mst_port, |
| aux); |
| |
| return drm_dp_send_dpcd_read(port->mgr, port, |
| offset, size, buffer); |
| } |
| |
| /** |
| * drm_dp_mst_dpcd_write() - write a series of bytes to the DPCD via sideband |
| * @aux: Fake sideband AUX CH |
| * @offset: address of the (first) register to write |
| * @buffer: buffer containing the values to write |
| * @size: number of bytes in @buffer |
| * |
| * Performs the same functionality for remote devices via |
| * sideband messaging as drm_dp_dpcd_write() does for local |
| * devices via actual AUX CH. |
| * |
| * Return: number of bytes written on success, negative error code on failure. |
| */ |
| ssize_t drm_dp_mst_dpcd_write(struct drm_dp_aux *aux, |
| unsigned int offset, void *buffer, size_t size) |
| { |
| struct drm_dp_mst_port *port = container_of(aux, struct drm_dp_mst_port, |
| aux); |
| |
| return drm_dp_send_dpcd_write(port->mgr, port, |
| offset, size, buffer); |
| } |
| |
| static int drm_dp_check_mstb_guid(struct drm_dp_mst_branch *mstb, guid_t *guid) |
| { |
| int ret = 0; |
| |
| guid_copy(&mstb->guid, guid); |
| |
| if (!drm_dp_validate_guid(mstb->mgr, &mstb->guid)) { |
| u8 buf[UUID_SIZE]; |
| |
| export_guid(buf, &mstb->guid); |
| |
| if (mstb->port_parent) { |
| ret = drm_dp_send_dpcd_write(mstb->mgr, |
| mstb->port_parent, |
| DP_GUID, sizeof(buf), buf); |
| } else { |
| ret = drm_dp_dpcd_write(mstb->mgr->aux, |
| DP_GUID, buf, sizeof(buf)); |
| } |
| } |
| |
| if (ret < 16 && ret > 0) |
| return -EPROTO; |
| |
| return ret == 16 ? 0 : ret; |
| } |
| |
| static void build_mst_prop_path(const struct drm_dp_mst_branch *mstb, |
| int pnum, |
| char *proppath, |
| size_t proppath_size) |
| { |
| int i; |
| char temp[8]; |
| |
| snprintf(proppath, proppath_size, "mst:%d", mstb->mgr->conn_base_id); |
| for (i = 0; i < (mstb->lct - 1); i++) { |
| int shift = (i % 2) ? 0 : 4; |
| int port_num = (mstb->rad[i / 2] >> shift) & 0xf; |
| |
| snprintf(temp, sizeof(temp), "-%d", port_num); |
| strlcat(proppath, temp, proppath_size); |
| } |
| snprintf(temp, sizeof(temp), "-%d", pnum); |
| strlcat(proppath, temp, proppath_size); |
| } |
| |
| /** |
| * drm_dp_mst_connector_late_register() - Late MST connector registration |
| * @connector: The MST connector |
| * @port: The MST port for this connector |
| * |
| * Helper to register the remote aux device for this MST port. Drivers should |
| * call this from their mst connector's late_register hook to enable MST aux |
| * devices. |
| * |
| * Return: 0 on success, negative error code on failure. |
| */ |
| int drm_dp_mst_connector_late_register(struct drm_connector *connector, |
| struct drm_dp_mst_port *port) |
| { |
| drm_dbg_kms(port->mgr->dev, "registering %s remote bus for %s\n", |
| port->aux.name, connector->kdev->kobj.name); |
| |
| port->aux.dev = connector->kdev; |
| return drm_dp_aux_register_devnode(&port->aux); |
| } |
| EXPORT_SYMBOL(drm_dp_mst_connector_late_register); |
| |
| /** |
| * drm_dp_mst_connector_early_unregister() - Early MST connector unregistration |
| * @connector: The MST connector |
| * @port: The MST port for this connector |
| * |
| * Helper to unregister the remote aux device for this MST port, registered by |
| * drm_dp_mst_connector_late_register(). Drivers should call this from their mst |
| * connector's early_unregister hook. |
| */ |
| void drm_dp_mst_connector_early_unregister(struct drm_connector *connector, |
| struct drm_dp_mst_port *port) |
| { |
| drm_dbg_kms(port->mgr->dev, "unregistering %s remote bus for %s\n", |
| port->aux.name, connector->kdev->kobj.name); |
| drm_dp_aux_unregister_devnode(&port->aux); |
| } |
| EXPORT_SYMBOL(drm_dp_mst_connector_early_unregister); |
| |
| static void |
| drm_dp_mst_port_add_connector(struct drm_dp_mst_branch *mstb, |
| struct drm_dp_mst_port *port) |
| { |
| struct drm_dp_mst_topology_mgr *mgr = port->mgr; |
| char proppath[255]; |
| int ret; |
| |
| build_mst_prop_path(mstb, port->port_num, proppath, sizeof(proppath)); |
| port->connector = mgr->cbs->add_connector(mgr, port, proppath); |
| if (!port->connector) { |
| ret = -ENOMEM; |
| goto error; |
| } |
| |
| if (port->pdt != DP_PEER_DEVICE_NONE && |
| drm_dp_mst_is_end_device(port->pdt, port->mcs) && |
| drm_dp_mst_port_is_logical(port)) |
| port->cached_edid = drm_edid_read_ddc(port->connector, |
| &port->aux.ddc); |
| |
| drm_connector_register(port->connector); |
| return; |
| |
| error: |
| drm_err(mgr->dev, "Failed to create connector for port %p: %d\n", port, ret); |
| } |
| |
| /* |
| * Drop a topology reference, and unlink the port from the in-memory topology |
| * layout |
| */ |
| static void |
| drm_dp_mst_topology_unlink_port(struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_port *port) |
| { |
| mutex_lock(&mgr->lock); |
| port->parent->num_ports--; |
| list_del(&port->next); |
| mutex_unlock(&mgr->lock); |
| drm_dp_mst_topology_put_port(port); |
| } |
| |
| static struct drm_dp_mst_port * |
| drm_dp_mst_add_port(struct drm_device *dev, |
| struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_branch *mstb, u8 port_number) |
| { |
| struct drm_dp_mst_port *port = kzalloc(sizeof(*port), GFP_KERNEL); |
| |
| if (!port) |
| return NULL; |
| |
| kref_init(&port->topology_kref); |
| kref_init(&port->malloc_kref); |
| port->parent = mstb; |
| port->port_num = port_number; |
| port->mgr = mgr; |
| port->aux.name = "DPMST"; |
| port->aux.dev = dev->dev; |
| port->aux.is_remote = true; |
| |
| /* initialize the MST downstream port's AUX crc work queue */ |
| port->aux.drm_dev = dev; |
| drm_dp_remote_aux_init(&port->aux); |
| |
| /* |
| * Make sure the memory allocation for our parent branch stays |
| * around until our own memory allocation is released |
| */ |
| drm_dp_mst_get_mstb_malloc(mstb); |
| |
| return port; |
| } |
| |
| static int |
| drm_dp_mst_handle_link_address_port(struct drm_dp_mst_branch *mstb, |
| struct drm_device *dev, |
| struct drm_dp_link_addr_reply_port *port_msg) |
| { |
| struct drm_dp_mst_topology_mgr *mgr = mstb->mgr; |
| struct drm_dp_mst_port *port; |
| int ret; |
| u8 new_pdt = DP_PEER_DEVICE_NONE; |
| bool new_mcs = 0; |
| bool created = false, send_link_addr = false, changed = false; |
| |
| port = drm_dp_get_port(mstb, port_msg->port_number); |
| if (!port) { |
| port = drm_dp_mst_add_port(dev, mgr, mstb, |
| port_msg->port_number); |
| if (!port) |
| return -ENOMEM; |
| created = true; |
| changed = true; |
| } else if (!port->input && port_msg->input_port && port->connector) { |
| /* Since port->connector can't be changed here, we create a |
| * new port if input_port changes from 0 to 1 |
| */ |
| drm_dp_mst_topology_unlink_port(mgr, port); |
| drm_dp_mst_topology_put_port(port); |
| port = drm_dp_mst_add_port(dev, mgr, mstb, |
| port_msg->port_number); |
| if (!port) |
| return -ENOMEM; |
| changed = true; |
| created = true; |
| } else if (port->input && !port_msg->input_port) { |
| changed = true; |
| } else if (port->connector) { |
| /* We're updating a port that's exposed to userspace, so do it |
| * under lock |
| */ |
| drm_modeset_lock(&mgr->base.lock, NULL); |
| |
| changed = port->ddps != port_msg->ddps || |
| (port->ddps && |
| (port->ldps != port_msg->legacy_device_plug_status || |
| port->dpcd_rev != port_msg->dpcd_revision || |
| port->mcs != port_msg->mcs || |
| port->pdt != port_msg->peer_device_type || |
| port->num_sdp_stream_sinks != |
| port_msg->num_sdp_stream_sinks)); |
| } |
| |
| port->input = port_msg->input_port; |
| if (!port->input) |
| new_pdt = port_msg->peer_device_type; |
| new_mcs = port_msg->mcs; |
| port->ddps = port_msg->ddps; |
| port->ldps = port_msg->legacy_device_plug_status; |
| port->dpcd_rev = port_msg->dpcd_revision; |
| port->num_sdp_streams = port_msg->num_sdp_streams; |
| port->num_sdp_stream_sinks = port_msg->num_sdp_stream_sinks; |
| |
| /* manage mstb port lists with mgr lock - take a reference |
| for this list */ |
| if (created) { |
| mutex_lock(&mgr->lock); |
| drm_dp_mst_topology_get_port(port); |
| list_add(&port->next, &mstb->ports); |
| mstb->num_ports++; |
| mutex_unlock(&mgr->lock); |
| } |
| |
| /* |
| * Reprobe PBN caps on both hotplug, and when re-probing the link |
| * for our parent mstb |
| */ |
| if (port->ddps && !port->input) { |
| ret = drm_dp_send_enum_path_resources(mgr, mstb, |
| port); |
| if (ret == 1) |
| changed = true; |
| } else { |
| port->full_pbn = 0; |
| } |
| |
| ret = drm_dp_port_set_pdt(port, new_pdt, new_mcs); |
| if (ret == 1) { |
| send_link_addr = true; |
| } else if (ret < 0) { |
| drm_err(dev, "Failed to change PDT on port %p: %d\n", port, ret); |
| goto fail; |
| } |
| |
| /* |
| * If this port wasn't just created, then we're reprobing because |
| * we're coming out of suspend. In this case, always resend the link |
| * address if there's an MSTB on this port |
| */ |
| if (!created && port->pdt == DP_PEER_DEVICE_MST_BRANCHING && |
| port->mcs) |
| send_link_addr = true; |
| |
| if (port->connector) |
| drm_modeset_unlock(&mgr->base.lock); |
| else if (!port->input) |
| drm_dp_mst_port_add_connector(mstb, port); |
| |
| if (send_link_addr && port->mstb) { |
| ret = drm_dp_send_link_address(mgr, port->mstb); |
| if (ret == 1) /* MSTB below us changed */ |
| changed = true; |
| else if (ret < 0) |
| goto fail_put; |
| } |
| |
| /* put reference to this port */ |
| drm_dp_mst_topology_put_port(port); |
| return changed; |
| |
| fail: |
| drm_dp_mst_topology_unlink_port(mgr, port); |
| if (port->connector) |
| drm_modeset_unlock(&mgr->base.lock); |
| fail_put: |
| drm_dp_mst_topology_put_port(port); |
| return ret; |
| } |
| |
| static int |
| drm_dp_mst_handle_conn_stat(struct drm_dp_mst_branch *mstb, |
| struct drm_dp_connection_status_notify *conn_stat) |
| { |
| struct drm_dp_mst_topology_mgr *mgr = mstb->mgr; |
| struct drm_dp_mst_port *port; |
| int old_ddps, ret; |
| u8 new_pdt; |
| bool new_mcs; |
| bool dowork = false, create_connector = false; |
| |
| port = drm_dp_get_port(mstb, conn_stat->port_number); |
| if (!port) |
| return 0; |
| |
| if (port->connector) { |
| if (!port->input && conn_stat->input_port) { |
| /* |
| * We can't remove a connector from an already exposed |
| * port, so just throw the port out and make sure we |
| * reprobe the link address of it's parent MSTB |
| */ |
| drm_dp_mst_topology_unlink_port(mgr, port); |
| mstb->link_address_sent = false; |
| dowork = true; |
| goto out; |
| } |
| |
| /* Locking is only needed if the port's exposed to userspace */ |
| drm_modeset_lock(&mgr->base.lock, NULL); |
| } else if (port->input && !conn_stat->input_port) { |
| create_connector = true; |
| /* Reprobe link address so we get num_sdp_streams */ |
| mstb->link_address_sent = false; |
| dowork = true; |
| } |
| |
| old_ddps = port->ddps; |
| port->input = conn_stat->input_port; |
| port->ldps = conn_stat->legacy_device_plug_status; |
| port->ddps = conn_stat->displayport_device_plug_status; |
| |
| if (old_ddps != port->ddps) { |
| if (port->ddps && !port->input) |
| drm_dp_send_enum_path_resources(mgr, mstb, port); |
| else |
| port->full_pbn = 0; |
| } |
| |
| new_pdt = port->input ? DP_PEER_DEVICE_NONE : conn_stat->peer_device_type; |
| new_mcs = conn_stat->message_capability_status; |
| ret = drm_dp_port_set_pdt(port, new_pdt, new_mcs); |
| if (ret == 1) { |
| dowork = true; |
| } else if (ret < 0) { |
| drm_err(mgr->dev, "Failed to change PDT for port %p: %d\n", port, ret); |
| dowork = false; |
| } |
| |
| if (port->connector) |
| drm_modeset_unlock(&mgr->base.lock); |
| else if (create_connector) |
| drm_dp_mst_port_add_connector(mstb, port); |
| |
| out: |
| drm_dp_mst_topology_put_port(port); |
| return dowork; |
| } |
| |
| static struct drm_dp_mst_branch *drm_dp_get_mst_branch_device(struct drm_dp_mst_topology_mgr *mgr, |
| u8 lct, u8 *rad) |
| { |
| struct drm_dp_mst_branch *mstb; |
| struct drm_dp_mst_port *port; |
| int i, ret; |
| /* find the port by iterating down */ |
| |
| mutex_lock(&mgr->lock); |
| mstb = mgr->mst_primary; |
| |
| if (!mstb) |
| goto out; |
| |
| for (i = 0; i < lct - 1; i++) { |
| int shift = (i % 2) ? 0 : 4; |
| int port_num = (rad[i / 2] >> shift) & 0xf; |
| |
| list_for_each_entry(port, &mstb->ports, next) { |
| if (port->port_num == port_num) { |
| mstb = port->mstb; |
| if (!mstb) { |
| drm_err(mgr->dev, |
| "failed to lookup MSTB with lct %d, rad %02x\n", |
| lct, rad[0]); |
| goto out; |
| } |
| |
| break; |
| } |
| } |
| } |
| ret = drm_dp_mst_topology_try_get_mstb(mstb); |
| if (!ret) |
| mstb = NULL; |
| out: |
| mutex_unlock(&mgr->lock); |
| return mstb; |
| } |
| |
| static struct drm_dp_mst_branch * |
| get_mst_branch_device_by_guid_helper(struct drm_dp_mst_branch *mstb, |
| const guid_t *guid) |
| { |
| struct drm_dp_mst_branch *found_mstb; |
| struct drm_dp_mst_port *port; |
| |
| if (!mstb) |
| return NULL; |
| |
| if (guid_equal(&mstb->guid, guid)) |
| return mstb; |
| |
| list_for_each_entry(port, &mstb->ports, next) { |
| found_mstb = get_mst_branch_device_by_guid_helper(port->mstb, guid); |
| |
| if (found_mstb) |
| return found_mstb; |
| } |
| |
| return NULL; |
| } |
| |
| static struct drm_dp_mst_branch * |
| drm_dp_get_mst_branch_device_by_guid(struct drm_dp_mst_topology_mgr *mgr, |
| const guid_t *guid) |
| { |
| struct drm_dp_mst_branch *mstb; |
| int ret; |
| |
| /* find the port by iterating down */ |
| mutex_lock(&mgr->lock); |
| |
| mstb = get_mst_branch_device_by_guid_helper(mgr->mst_primary, guid); |
| if (mstb) { |
| ret = drm_dp_mst_topology_try_get_mstb(mstb); |
| if (!ret) |
| mstb = NULL; |
| } |
| |
| mutex_unlock(&mgr->lock); |
| return mstb; |
| } |
| |
| static int drm_dp_check_and_send_link_address(struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_branch *mstb) |
| { |
| struct drm_dp_mst_port *port; |
| int ret; |
| bool changed = false; |
| |
| if (!mstb->link_address_sent) { |
| ret = drm_dp_send_link_address(mgr, mstb); |
| if (ret == 1) |
| changed = true; |
| else if (ret < 0) |
| return ret; |
| } |
| |
| list_for_each_entry(port, &mstb->ports, next) { |
| if (port->input || !port->ddps || !port->mstb) |
| continue; |
| |
| ret = drm_dp_check_and_send_link_address(mgr, port->mstb); |
| if (ret == 1) |
| changed = true; |
| else if (ret < 0) |
| return ret; |
| } |
| |
| return changed; |
| } |
| |
| static void drm_dp_mst_link_probe_work(struct work_struct *work) |
| { |
| struct drm_dp_mst_topology_mgr *mgr = |
| container_of(work, struct drm_dp_mst_topology_mgr, work); |
| struct drm_device *dev = mgr->dev; |
| struct drm_dp_mst_branch *mstb; |
| int ret; |
| bool clear_payload_id_table; |
| |
| mutex_lock(&mgr->probe_lock); |
| |
| mutex_lock(&mgr->lock); |
| clear_payload_id_table = !mgr->payload_id_table_cleared; |
| mgr->payload_id_table_cleared = true; |
| |
| mstb = mgr->mst_primary; |
| if (mstb) { |
| ret = drm_dp_mst_topology_try_get_mstb(mstb); |
| if (!ret) |
| mstb = NULL; |
| } |
| mutex_unlock(&mgr->lock); |
| if (!mstb) { |
| mutex_unlock(&mgr->probe_lock); |
| return; |
| } |
| |
| /* |
| * Certain branch devices seem to incorrectly report an available_pbn |
| * of 0 on downstream sinks, even after clearing the |
| * DP_PAYLOAD_ALLOCATE_* registers in |
| * drm_dp_mst_topology_mgr_set_mst(). Namely, the CableMatters USB-C |
| * 2x DP hub. Sending a CLEAR_PAYLOAD_ID_TABLE message seems to make |
| * things work again. |
| */ |
| if (clear_payload_id_table) { |
| drm_dbg_kms(dev, "Clearing payload ID table\n"); |
| drm_dp_send_clear_payload_id_table(mgr, mstb); |
| } |
| |
| ret = drm_dp_check_and_send_link_address(mgr, mstb); |
| drm_dp_mst_topology_put_mstb(mstb); |
| |
| mutex_unlock(&mgr->probe_lock); |
| if (ret > 0) |
| drm_kms_helper_hotplug_event(dev); |
| } |
| |
| static void drm_dp_mst_queue_probe_work(struct drm_dp_mst_topology_mgr *mgr) |
| { |
| queue_work(system_long_wq, &mgr->work); |
| } |
| |
| static bool drm_dp_validate_guid(struct drm_dp_mst_topology_mgr *mgr, |
| guid_t *guid) |
| { |
| if (!guid_is_null(guid)) |
| return true; |
| |
| guid_gen(guid); |
| |
| return false; |
| } |
| |
| static void build_dpcd_read(struct drm_dp_sideband_msg_tx *msg, |
| u8 port_num, u32 offset, u8 num_bytes) |
| { |
| struct drm_dp_sideband_msg_req_body req; |
| |
| req.req_type = DP_REMOTE_DPCD_READ; |
| req.u.dpcd_read.port_number = port_num; |
| req.u.dpcd_read.dpcd_address = offset; |
| req.u.dpcd_read.num_bytes = num_bytes; |
| drm_dp_encode_sideband_req(&req, msg); |
| } |
| |
| static int drm_dp_send_sideband_msg(struct drm_dp_mst_topology_mgr *mgr, |
| bool up, u8 *msg, int len) |
| { |
| int ret; |
| int regbase = up ? DP_SIDEBAND_MSG_UP_REP_BASE : DP_SIDEBAND_MSG_DOWN_REQ_BASE; |
| int tosend, total, offset; |
| int retries = 0; |
| |
| retry: |
| total = len; |
| offset = 0; |
| do { |
| tosend = min3(mgr->max_dpcd_transaction_bytes, 16, total); |
| |
| ret = drm_dp_dpcd_write(mgr->aux, regbase + offset, |
| &msg[offset], |
| tosend); |
| if (ret != tosend) { |
| if (ret == -EIO && retries < 5) { |
| retries++; |
| goto retry; |
| } |
| drm_dbg_kms(mgr->dev, "failed to dpcd write %d %d\n", tosend, ret); |
| |
| return -EIO; |
| } |
| offset += tosend; |
| total -= tosend; |
| } while (total > 0); |
| return 0; |
| } |
| |
| static int set_hdr_from_dst_qlock(struct drm_dp_sideband_msg_hdr *hdr, |
| struct drm_dp_sideband_msg_tx *txmsg) |
| { |
| struct drm_dp_mst_branch *mstb = txmsg->dst; |
| u8 req_type; |
| |
| req_type = txmsg->msg[0] & 0x7f; |
| if (req_type == DP_CONNECTION_STATUS_NOTIFY || |
| req_type == DP_RESOURCE_STATUS_NOTIFY || |
| req_type == DP_CLEAR_PAYLOAD_ID_TABLE) |
| hdr->broadcast = 1; |
| else |
| hdr->broadcast = 0; |
| hdr->path_msg = txmsg->path_msg; |
| if (hdr->broadcast) { |
| hdr->lct = 1; |
| hdr->lcr = 6; |
| } else { |
| hdr->lct = mstb->lct; |
| hdr->lcr = mstb->lct - 1; |
| } |
| |
| memcpy(hdr->rad, mstb->rad, hdr->lct / 2); |
| |
| return 0; |
| } |
| /* |
| * process a single block of the next message in the sideband queue |
| */ |
| static int process_single_tx_qlock(struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_sideband_msg_tx *txmsg, |
| bool up) |
| { |
| u8 chunk[48]; |
| struct drm_dp_sideband_msg_hdr hdr; |
| int len, space, idx, tosend; |
| int ret; |
| |
| if (txmsg->state == DRM_DP_SIDEBAND_TX_SENT) |
| return 0; |
| |
| memset(&hdr, 0, sizeof(struct drm_dp_sideband_msg_hdr)); |
| |
| if (txmsg->state == DRM_DP_SIDEBAND_TX_QUEUED) |
| txmsg->state = DRM_DP_SIDEBAND_TX_START_SEND; |
| |
| /* make hdr from dst mst */ |
| ret = set_hdr_from_dst_qlock(&hdr, txmsg); |
| if (ret < 0) |
| return ret; |
| |
| /* amount left to send in this message */ |
| len = txmsg->cur_len - txmsg->cur_offset; |
| |
| /* 48 - sideband msg size - 1 byte for data CRC, x header bytes */ |
| space = 48 - 1 - drm_dp_calc_sb_hdr_size(&hdr); |
| |
| tosend = min(len, space); |
| if (len == txmsg->cur_len) |
| hdr.somt = 1; |
| if (space >= len) |
| hdr.eomt = 1; |
| |
| |
| hdr.msg_len = tosend + 1; |
| drm_dp_encode_sideband_msg_hdr(&hdr, chunk, &idx); |
| memcpy(&chunk[idx], &txmsg->msg[txmsg->cur_offset], tosend); |
| /* add crc at end */ |
| drm_dp_crc_sideband_chunk_req(&chunk[idx], tosend); |
| idx += tosend + 1; |
| |
| ret = drm_dp_send_sideband_msg(mgr, up, chunk, idx); |
| if (ret) { |
| if (drm_debug_enabled(DRM_UT_DP)) { |
| struct drm_printer p = drm_dbg_printer(mgr->dev, |
| DRM_UT_DP, |
| DBG_PREFIX); |
| |
| drm_printf(&p, "sideband msg failed to send\n"); |
| drm_dp_mst_dump_sideband_msg_tx(&p, txmsg); |
| } |
| return ret; |
| } |
| |
| txmsg->cur_offset += tosend; |
| if (txmsg->cur_offset == txmsg->cur_len) { |
| txmsg->state = DRM_DP_SIDEBAND_TX_SENT; |
| return 1; |
| } |
| return 0; |
| } |
| |
| static void process_single_down_tx_qlock(struct drm_dp_mst_topology_mgr *mgr) |
| { |
| struct drm_dp_sideband_msg_tx *txmsg; |
| int ret; |
| |
| WARN_ON(!mutex_is_locked(&mgr->qlock)); |
| |
| /* construct a chunk from the first msg in the tx_msg queue */ |
| if (list_empty(&mgr->tx_msg_downq)) |
| return; |
| |
| txmsg = list_first_entry(&mgr->tx_msg_downq, |
| struct drm_dp_sideband_msg_tx, next); |
| ret = process_single_tx_qlock(mgr, txmsg, false); |
| if (ret < 0) { |
| drm_dbg_kms(mgr->dev, "failed to send msg in q %d\n", ret); |
| list_del(&txmsg->next); |
| txmsg->state = DRM_DP_SIDEBAND_TX_TIMEOUT; |
| wake_up_all(&mgr->tx_waitq); |
| } |
| } |
| |
| static void drm_dp_queue_down_tx(struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_sideband_msg_tx *txmsg) |
| { |
| mutex_lock(&mgr->qlock); |
| list_add_tail(&txmsg->next, &mgr->tx_msg_downq); |
| |
| if (drm_debug_enabled(DRM_UT_DP)) { |
| struct drm_printer p = drm_dbg_printer(mgr->dev, DRM_UT_DP, |
| DBG_PREFIX); |
| |
| drm_dp_mst_dump_sideband_msg_tx(&p, txmsg); |
| } |
| |
| if (list_is_singular(&mgr->tx_msg_downq)) |
| process_single_down_tx_qlock(mgr); |
| mutex_unlock(&mgr->qlock); |
| } |
| |
| static void |
| drm_dp_dump_link_address(const struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_link_address_ack_reply *reply) |
| { |
| struct drm_dp_link_addr_reply_port *port_reply; |
| int i; |
| |
| for (i = 0; i < reply->nports; i++) { |
| port_reply = &reply->ports[i]; |
| drm_dbg_kms(mgr->dev, |
| "port %d: input %d, pdt: %d, pn: %d, dpcd_rev: %02x, mcs: %d, ddps: %d, ldps %d, sdp %d/%d\n", |
| i, |
| port_reply->input_port, |
| port_reply->peer_device_type, |
| port_reply->port_number, |
| port_reply->dpcd_revision, |
| port_reply->mcs, |
| port_reply->ddps, |
| port_reply->legacy_device_plug_status, |
| port_reply->num_sdp_streams, |
| port_reply->num_sdp_stream_sinks); |
| } |
| } |
| |
| static int drm_dp_send_link_address(struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_branch *mstb) |
| { |
| struct drm_dp_sideband_msg_tx *txmsg; |
| struct drm_dp_link_address_ack_reply *reply; |
| struct drm_dp_mst_port *port, *tmp; |
| int i, ret, port_mask = 0; |
| bool changed = false; |
| |
| txmsg = kzalloc(sizeof(*txmsg), GFP_KERNEL); |
| if (!txmsg) |
| return -ENOMEM; |
| |
| txmsg->dst = mstb; |
| build_link_address(txmsg); |
| |
| mstb->link_address_sent = true; |
| drm_dp_queue_down_tx(mgr, txmsg); |
| |
| /* FIXME: Actually do some real error handling here */ |
| ret = drm_dp_mst_wait_tx_reply(mstb, txmsg); |
| if (ret < 0) { |
| drm_err(mgr->dev, "Sending link address failed with %d\n", ret); |
| goto out; |
| } |
| if (txmsg->reply.reply_type == DP_SIDEBAND_REPLY_NAK) { |
| drm_err(mgr->dev, "link address NAK received\n"); |
| ret = -EIO; |
| goto out; |
| } |
| |
| reply = &txmsg->reply.u.link_addr; |
| drm_dbg_kms(mgr->dev, "link address reply: %d\n", reply->nports); |
| drm_dp_dump_link_address(mgr, reply); |
| |
| ret = drm_dp_check_mstb_guid(mstb, &reply->guid); |
| if (ret) { |
| char buf[64]; |
| |
| drm_dp_mst_rad_to_str(mstb->rad, mstb->lct, buf, sizeof(buf)); |
| drm_err(mgr->dev, "GUID check on %s failed: %d\n", buf, ret); |
| goto out; |
| } |
| |
| for (i = 0; i < reply->nports; i++) { |
| port_mask |= BIT(reply->ports[i].port_number); |
| ret = drm_dp_mst_handle_link_address_port(mstb, mgr->dev, |
| &reply->ports[i]); |
| if (ret == 1) |
| changed = true; |
| else if (ret < 0) |
| goto out; |
| } |
| |
| /* Prune any ports that are currently a part of mstb in our in-memory |
| * topology, but were not seen in this link address. Usually this |
| * means that they were removed while the topology was out of sync, |
| * e.g. during suspend/resume |
| */ |
| mutex_lock(&mgr->lock); |
| list_for_each_entry_safe(port, tmp, &mstb->ports, next) { |
| if (port_mask & BIT(port->port_num)) |
| continue; |
| |
| drm_dbg_kms(mgr->dev, "port %d was not in link address, removing\n", |
| port->port_num); |
| list_del(&port->next); |
| drm_dp_mst_topology_put_port(port); |
| changed = true; |
| } |
| mutex_unlock(&mgr->lock); |
| |
| out: |
| if (ret < 0) |
| mstb->link_address_sent = false; |
| kfree(txmsg); |
| return ret < 0 ? ret : changed; |
| } |
| |
| static void |
| drm_dp_send_clear_payload_id_table(struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_branch *mstb) |
| { |
| struct drm_dp_sideband_msg_tx *txmsg; |
| int ret; |
| |
| txmsg = kzalloc(sizeof(*txmsg), GFP_KERNEL); |
| if (!txmsg) |
| return; |
| |
| txmsg->dst = mstb; |
| build_clear_payload_id_table(txmsg); |
| |
| drm_dp_queue_down_tx(mgr, txmsg); |
| |
| ret = drm_dp_mst_wait_tx_reply(mstb, txmsg); |
| if (ret > 0 && txmsg->reply.reply_type == DP_SIDEBAND_REPLY_NAK) |
| drm_dbg_kms(mgr->dev, "clear payload table id nak received\n"); |
| |
| kfree(txmsg); |
| } |
| |
| static int |
| drm_dp_send_enum_path_resources(struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_branch *mstb, |
| struct drm_dp_mst_port *port) |
| { |
| struct drm_dp_enum_path_resources_ack_reply *path_res; |
| struct drm_dp_sideband_msg_tx *txmsg; |
| int ret; |
| |
| txmsg = kzalloc(sizeof(*txmsg), GFP_KERNEL); |
| if (!txmsg) |
| return -ENOMEM; |
| |
| txmsg->dst = mstb; |
| build_enum_path_resources(txmsg, port->port_num); |
| |
| drm_dp_queue_down_tx(mgr, txmsg); |
| |
| ret = drm_dp_mst_wait_tx_reply(mstb, txmsg); |
| if (ret > 0) { |
| ret = 0; |
| path_res = &txmsg->reply.u.path_resources; |
| |
| if (txmsg->reply.reply_type == DP_SIDEBAND_REPLY_NAK) { |
| drm_dbg_kms(mgr->dev, "enum path resources nak received\n"); |
| } else { |
| if (port->port_num != path_res->port_number) |
| DRM_ERROR("got incorrect port in response\n"); |
| |
| drm_dbg_kms(mgr->dev, "enum path resources %d: %d %d\n", |
| path_res->port_number, |
| path_res->full_payload_bw_number, |
| path_res->avail_payload_bw_number); |
| |
| /* |
| * If something changed, make sure we send a |
| * hotplug |
| */ |
| if (port->full_pbn != path_res->full_payload_bw_number || |
| port->fec_capable != path_res->fec_capable) |
| ret = 1; |
| |
| port->full_pbn = path_res->full_payload_bw_number; |
| port->fec_capable = path_res->fec_capable; |
| } |
| } |
| |
| kfree(txmsg); |
| return ret; |
| } |
| |
| static struct drm_dp_mst_port *drm_dp_get_last_connected_port_to_mstb(struct drm_dp_mst_branch *mstb) |
| { |
| if (!mstb->port_parent) |
| return NULL; |
| |
| if (mstb->port_parent->mstb != mstb) |
| return mstb->port_parent; |
| |
| return drm_dp_get_last_connected_port_to_mstb(mstb->port_parent->parent); |
| } |
| |
| /* |
| * Searches upwards in the topology starting from mstb to try to find the |
| * closest available parent of mstb that's still connected to the rest of the |
| * topology. This can be used in order to perform operations like releasing |
| * payloads, where the branch device which owned the payload may no longer be |
| * around and thus would require that the payload on the last living relative |
| * be freed instead. |
| */ |
| static struct drm_dp_mst_branch * |
| drm_dp_get_last_connected_port_and_mstb(struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_branch *mstb, |
| int *port_num) |
| { |
| struct drm_dp_mst_branch *rmstb = NULL; |
| struct drm_dp_mst_port *found_port; |
| |
| mutex_lock(&mgr->lock); |
| if (!mgr->mst_primary) |
| goto out; |
| |
| do { |
| found_port = drm_dp_get_last_connected_port_to_mstb(mstb); |
| if (!found_port) |
| break; |
| |
| if (drm_dp_mst_topology_try_get_mstb(found_port->parent)) { |
| rmstb = found_port->parent; |
| *port_num = found_port->port_num; |
| } else { |
| /* Search again, starting from this parent */ |
| mstb = found_port->parent; |
| } |
| } while (!rmstb); |
| out: |
| mutex_unlock(&mgr->lock); |
| return rmstb; |
| } |
| |
| static int drm_dp_payload_send_msg(struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_port *port, |
| int id, |
| int pbn) |
| { |
| struct drm_dp_sideband_msg_tx *txmsg; |
| struct drm_dp_mst_branch *mstb; |
| int ret, port_num; |
| u8 sinks[DRM_DP_MAX_SDP_STREAMS]; |
| int i; |
| |
| port_num = port->port_num; |
| mstb = drm_dp_mst_topology_get_mstb_validated(mgr, port->parent); |
| if (!mstb) { |
| mstb = drm_dp_get_last_connected_port_and_mstb(mgr, |
| port->parent, |
| &port_num); |
| |
| if (!mstb) |
| return -EINVAL; |
| } |
| |
| txmsg = kzalloc(sizeof(*txmsg), GFP_KERNEL); |
| if (!txmsg) { |
| ret = -ENOMEM; |
| goto fail_put; |
| } |
| |
| for (i = 0; i < port->num_sdp_streams; i++) |
| sinks[i] = i; |
| |
| txmsg->dst = mstb; |
| build_allocate_payload(txmsg, port_num, |
| id, |
| pbn, port->num_sdp_streams, sinks); |
| |
| drm_dp_queue_down_tx(mgr, txmsg); |
| |
| /* |
| * FIXME: there is a small chance that between getting the last |
| * connected mstb and sending the payload message, the last connected |
| * mstb could also be removed from the topology. In the future, this |
| * needs to be fixed by restarting the |
| * drm_dp_get_last_connected_port_and_mstb() search in the event of a |
| * timeout if the topology is still connected to the system. |
| */ |
| ret = drm_dp_mst_wait_tx_reply(mstb, txmsg); |
| if (ret > 0) { |
| if (txmsg->reply.reply_type == DP_SIDEBAND_REPLY_NAK) |
| ret = -EINVAL; |
| else |
| ret = 0; |
| } |
| kfree(txmsg); |
| fail_put: |
| drm_dp_mst_topology_put_mstb(mstb); |
| return ret; |
| } |
| |
| int drm_dp_send_power_updown_phy(struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_port *port, bool power_up) |
| { |
| struct drm_dp_sideband_msg_tx *txmsg; |
| int ret; |
| |
| port = drm_dp_mst_topology_get_port_validated(mgr, port); |
| if (!port) |
| return -EINVAL; |
| |
| txmsg = kzalloc(sizeof(*txmsg), GFP_KERNEL); |
| if (!txmsg) { |
| drm_dp_mst_topology_put_port(port); |
| return -ENOMEM; |
| } |
| |
| txmsg->dst = port->parent; |
| build_power_updown_phy(txmsg, port->port_num, power_up); |
| drm_dp_queue_down_tx(mgr, txmsg); |
| |
| ret = drm_dp_mst_wait_tx_reply(port->parent, txmsg); |
| if (ret > 0) { |
| if (txmsg->reply.reply_type == DP_SIDEBAND_REPLY_NAK) |
| ret = -EINVAL; |
| else |
| ret = 0; |
| } |
| kfree(txmsg); |
| drm_dp_mst_topology_put_port(port); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(drm_dp_send_power_updown_phy); |
| |
| int drm_dp_send_query_stream_enc_status(struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_port *port, |
| struct drm_dp_query_stream_enc_status_ack_reply *status) |
| { |
| struct drm_dp_mst_topology_state *state; |
| struct drm_dp_mst_atomic_payload *payload; |
| struct drm_dp_sideband_msg_tx *txmsg; |
| u8 nonce[7]; |
| int ret; |
| |
| txmsg = kzalloc(sizeof(*txmsg), GFP_KERNEL); |
| if (!txmsg) |
| return -ENOMEM; |
| |
| port = drm_dp_mst_topology_get_port_validated(mgr, port); |
| if (!port) { |
| ret = -EINVAL; |
| goto out_get_port; |
| } |
| |
| get_random_bytes(nonce, sizeof(nonce)); |
| |
| drm_modeset_lock(&mgr->base.lock, NULL); |
| state = to_drm_dp_mst_topology_state(mgr->base.state); |
| payload = drm_atomic_get_mst_payload_state(state, port); |
| |
| /* |
| * "Source device targets the QUERY_STREAM_ENCRYPTION_STATUS message |
| * transaction at the MST Branch device directly connected to the |
| * Source" |
| */ |
| txmsg->dst = mgr->mst_primary; |
| |
| build_query_stream_enc_status(txmsg, payload->vcpi, nonce); |
| |
| drm_dp_queue_down_tx(mgr, txmsg); |
| |
| ret = drm_dp_mst_wait_tx_reply(mgr->mst_primary, txmsg); |
| if (ret < 0) { |
| goto out; |
| } else if (txmsg->reply.reply_type == DP_SIDEBAND_REPLY_NAK) { |
| drm_dbg_kms(mgr->dev, "query encryption status nak received\n"); |
| ret = -ENXIO; |
| goto out; |
| } |
| |
| ret = 0; |
| memcpy(status, &txmsg->reply.u.enc_status, sizeof(*status)); |
| |
| out: |
| drm_modeset_unlock(&mgr->base.lock); |
| drm_dp_mst_topology_put_port(port); |
| out_get_port: |
| kfree(txmsg); |
| return ret; |
| } |
| EXPORT_SYMBOL(drm_dp_send_query_stream_enc_status); |
| |
| static int drm_dp_create_payload_at_dfp(struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_atomic_payload *payload) |
| { |
| return drm_dp_dpcd_write_payload(mgr, payload->vcpi, payload->vc_start_slot, |
| payload->time_slots); |
| } |
| |
| static int drm_dp_create_payload_to_remote(struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_atomic_payload *payload) |
| { |
| int ret; |
| struct drm_dp_mst_port *port = drm_dp_mst_topology_get_port_validated(mgr, payload->port); |
| |
| if (!port) |
| return -EIO; |
| |
| ret = drm_dp_payload_send_msg(mgr, port, payload->vcpi, payload->pbn); |
| drm_dp_mst_topology_put_port(port); |
| return ret; |
| } |
| |
| static void drm_dp_destroy_payload_at_remote_and_dfp(struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_topology_state *mst_state, |
| struct drm_dp_mst_atomic_payload *payload) |
| { |
| drm_dbg_kms(mgr->dev, "\n"); |
| |
| /* it's okay for these to fail */ |
| if (payload->payload_allocation_status == DRM_DP_MST_PAYLOAD_ALLOCATION_REMOTE) { |
| drm_dp_payload_send_msg(mgr, payload->port, payload->vcpi, 0); |
| payload->payload_allocation_status = DRM_DP_MST_PAYLOAD_ALLOCATION_DFP; |
| } |
| |
| if (payload->payload_allocation_status == DRM_DP_MST_PAYLOAD_ALLOCATION_DFP) |
| drm_dp_dpcd_write_payload(mgr, payload->vcpi, payload->vc_start_slot, 0); |
| } |
| |
| /** |
| * drm_dp_add_payload_part1() - Execute payload update part 1 |
| * @mgr: Manager to use. |
| * @mst_state: The MST atomic state |
| * @payload: The payload to write |
| * |
| * Determines the starting time slot for the given payload, and programs the VCPI for this payload |
| * into the DPCD of DPRX. After calling this, the driver should generate ACT and payload packets. |
| * |
| * Returns: 0 on success, error code on failure. |
| */ |
| int drm_dp_add_payload_part1(struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_topology_state *mst_state, |
| struct drm_dp_mst_atomic_payload *payload) |
| { |
| struct drm_dp_mst_port *port; |
| int ret; |
| |
| /* Update mst mgr info */ |
| if (mgr->payload_count == 0) |
| mgr->next_start_slot = mst_state->start_slot; |
| |
| payload->vc_start_slot = mgr->next_start_slot; |
| |
| mgr->payload_count++; |
| mgr->next_start_slot += payload->time_slots; |
| |
| payload->payload_allocation_status = DRM_DP_MST_PAYLOAD_ALLOCATION_LOCAL; |
| |
| /* Allocate payload to immediate downstream facing port */ |
| port = drm_dp_mst_topology_get_port_validated(mgr, payload->port); |
| if (!port) { |
| drm_dbg_kms(mgr->dev, |
| "VCPI %d for port %p not in topology, not creating a payload to remote\n", |
| payload->vcpi, payload->port); |
| return -EIO; |
| } |
| |
| ret = drm_dp_create_payload_at_dfp(mgr, payload); |
| if (ret < 0) { |
| drm_dbg_kms(mgr->dev, "Failed to create MST payload for port %p: %d\n", |
| payload->port, ret); |
| goto put_port; |
| } |
| |
| payload->payload_allocation_status = DRM_DP_MST_PAYLOAD_ALLOCATION_DFP; |
| |
| put_port: |
| drm_dp_mst_topology_put_port(port); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(drm_dp_add_payload_part1); |
| |
| /** |
| * drm_dp_remove_payload_part1() - Remove an MST payload along the virtual channel |
| * @mgr: Manager to use. |
| * @mst_state: The MST atomic state |
| * @payload: The payload to remove |
| * |
| * Removes a payload along the virtual channel if it was successfully allocated. |
| * After calling this, the driver should set HW to generate ACT and then switch to new |
| * payload allocation state. |
| */ |
| void drm_dp_remove_payload_part1(struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_topology_state *mst_state, |
| struct drm_dp_mst_atomic_payload *payload) |
| { |
| /* Remove remote payload allocation */ |
| bool send_remove = false; |
| |
| mutex_lock(&mgr->lock); |
| send_remove = drm_dp_mst_port_downstream_of_branch(payload->port, mgr->mst_primary); |
| mutex_unlock(&mgr->lock); |
| |
| if (send_remove) |
| drm_dp_destroy_payload_at_remote_and_dfp(mgr, mst_state, payload); |
| else |
| drm_dbg_kms(mgr->dev, "Payload for VCPI %d not in topology, not sending remove\n", |
| payload->vcpi); |
| |
| payload->payload_allocation_status = DRM_DP_MST_PAYLOAD_ALLOCATION_LOCAL; |
| } |
| EXPORT_SYMBOL(drm_dp_remove_payload_part1); |
| |
| /** |
| * drm_dp_remove_payload_part2() - Remove an MST payload locally |
| * @mgr: Manager to use. |
| * @mst_state: The MST atomic state |
| * @old_payload: The payload with its old state |
| * @new_payload: The payload with its latest state |
| * |
| * Updates the starting time slots of all other payloads which would have been shifted towards |
| * the start of the payload ID table as a result of removing a payload. Driver should call this |
| * function whenever it removes a payload in its HW. It's independent to the result of payload |
| * allocation/deallocation at branch devices along the virtual channel. |
| */ |
| void drm_dp_remove_payload_part2(struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_topology_state *mst_state, |
| const struct drm_dp_mst_atomic_payload *old_payload, |
| struct drm_dp_mst_atomic_payload *new_payload) |
| { |
| struct drm_dp_mst_atomic_payload *pos; |
| |
| /* Remove local payload allocation */ |
| list_for_each_entry(pos, &mst_state->payloads, next) { |
| if (pos != new_payload && pos->vc_start_slot > new_payload->vc_start_slot) |
| pos->vc_start_slot -= old_payload->time_slots; |
| } |
| new_payload->vc_start_slot = -1; |
| |
| mgr->payload_count--; |
| mgr->next_start_slot -= old_payload->time_slots; |
| |
| if (new_payload->delete) |
| drm_dp_mst_put_port_malloc(new_payload->port); |
| |
| new_payload->payload_allocation_status = DRM_DP_MST_PAYLOAD_ALLOCATION_NONE; |
| } |
| EXPORT_SYMBOL(drm_dp_remove_payload_part2); |
| /** |
| * drm_dp_add_payload_part2() - Execute payload update part 2 |
| * @mgr: Manager to use. |
| * @payload: The payload to update |
| * |
| * If @payload was successfully assigned a starting time slot by drm_dp_add_payload_part1(), this |
| * function will send the sideband messages to finish allocating this payload. |
| * |
| * Returns: 0 on success, negative error code on failure. |
| */ |
| int drm_dp_add_payload_part2(struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_atomic_payload *payload) |
| { |
| int ret = 0; |
| |
| /* Skip failed payloads */ |
| if (payload->payload_allocation_status != DRM_DP_MST_PAYLOAD_ALLOCATION_DFP) { |
| drm_dbg_kms(mgr->dev, "Part 1 of payload creation for %s failed, skipping part 2\n", |
| payload->port->connector->name); |
| return -EIO; |
| } |
| |
| /* Allocate payload to remote end */ |
| ret = drm_dp_create_payload_to_remote(mgr, payload); |
| if (ret < 0) |
| drm_err(mgr->dev, "Step 2 of creating MST payload for %p failed: %d\n", |
| payload->port, ret); |
| else |
| payload->payload_allocation_status = DRM_DP_MST_PAYLOAD_ALLOCATION_REMOTE; |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(drm_dp_add_payload_part2); |
| |
| static int drm_dp_send_dpcd_read(struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_port *port, |
| int offset, int size, u8 *bytes) |
| { |
| int ret = 0; |
| struct drm_dp_sideband_msg_tx *txmsg; |
| struct drm_dp_mst_branch *mstb; |
| |
| mstb = drm_dp_mst_topology_get_mstb_validated(mgr, port->parent); |
| if (!mstb) |
| return -EINVAL; |
| |
| txmsg = kzalloc(sizeof(*txmsg), GFP_KERNEL); |
| if (!txmsg) { |
| ret = -ENOMEM; |
| goto fail_put; |
| } |
| |
| build_dpcd_read(txmsg, port->port_num, offset, size); |
| txmsg->dst = port->parent; |
| |
| drm_dp_queue_down_tx(mgr, txmsg); |
| |
| ret = drm_dp_mst_wait_tx_reply(mstb, txmsg); |
| if (ret < 0) |
| goto fail_free; |
| |
| if (txmsg->reply.reply_type == 1) { |
| drm_dbg_kms(mgr->dev, "mstb %p port %d: DPCD read on addr 0x%x for %d bytes NAKed\n", |
| mstb, port->port_num, offset, size); |
| ret = -EIO; |
| goto fail_free; |
| } |
| |
| if (txmsg->reply.u.remote_dpcd_read_ack.num_bytes != size) { |
| ret = -EPROTO; |
| goto fail_free; |
| } |
| |
| ret = min_t(size_t, txmsg->reply.u.remote_dpcd_read_ack.num_bytes, |
| size); |
| memcpy(bytes, txmsg->reply.u.remote_dpcd_read_ack.bytes, ret); |
| |
| fail_free: |
| kfree(txmsg); |
| fail_put: |
| drm_dp_mst_topology_put_mstb(mstb); |
| |
| return ret; |
| } |
| |
| static int drm_dp_send_dpcd_write(struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_port *port, |
| int offset, int size, u8 *bytes) |
| { |
| int ret; |
| struct drm_dp_sideband_msg_tx *txmsg; |
| struct drm_dp_mst_branch *mstb; |
| |
| mstb = drm_dp_mst_topology_get_mstb_validated(mgr, port->parent); |
| if (!mstb) |
| return -EINVAL; |
| |
| txmsg = kzalloc(sizeof(*txmsg), GFP_KERNEL); |
| if (!txmsg) { |
| ret = -ENOMEM; |
| goto fail_put; |
| } |
| |
| build_dpcd_write(txmsg, port->port_num, offset, size, bytes); |
| txmsg->dst = mstb; |
| |
| drm_dp_queue_down_tx(mgr, txmsg); |
| |
| ret = drm_dp_mst_wait_tx_reply(mstb, txmsg); |
| if (ret > 0) { |
| if (txmsg->reply.reply_type == DP_SIDEBAND_REPLY_NAK) |
| ret = -EIO; |
| else |
| ret = size; |
| } |
| |
| kfree(txmsg); |
| fail_put: |
| drm_dp_mst_topology_put_mstb(mstb); |
| return ret; |
| } |
| |
| static int drm_dp_encode_up_ack_reply(struct drm_dp_sideband_msg_tx *msg, u8 req_type) |
| { |
| struct drm_dp_sideband_msg_reply_body reply; |
| |
| reply.reply_type = DP_SIDEBAND_REPLY_ACK; |
| reply.req_type = req_type; |
| drm_dp_encode_sideband_reply(&reply, msg); |
| return 0; |
| } |
| |
| static int drm_dp_send_up_ack_reply(struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_branch *mstb, |
| int req_type, bool broadcast) |
| { |
| struct drm_dp_sideband_msg_tx *txmsg; |
| |
| txmsg = kzalloc(sizeof(*txmsg), GFP_KERNEL); |
| if (!txmsg) |
| return -ENOMEM; |
| |
| txmsg->dst = mstb; |
| drm_dp_encode_up_ack_reply(txmsg, req_type); |
| |
| mutex_lock(&mgr->qlock); |
| /* construct a chunk from the first msg in the tx_msg queue */ |
| process_single_tx_qlock(mgr, txmsg, true); |
| mutex_unlock(&mgr->qlock); |
| |
| kfree(txmsg); |
| return 0; |
| } |
| |
| /** |
| * drm_dp_get_vc_payload_bw - get the VC payload BW for an MST link |
| * @mgr: The &drm_dp_mst_topology_mgr to use |
| * @link_rate: link rate in 10kbits/s units |
| * @link_lane_count: lane count |
| * |
| * Calculate the total bandwidth of a MultiStream Transport link. The returned |
| * value is in units of PBNs/(timeslots/1 MTP). This value can be used to |
| * convert the number of PBNs required for a given stream to the number of |
| * timeslots this stream requires in each MTP. |
| * |
| * Returns the BW / timeslot value in 20.12 fixed point format. |
| */ |
| fixed20_12 drm_dp_get_vc_payload_bw(const struct drm_dp_mst_topology_mgr *mgr, |
| int link_rate, int link_lane_count) |
| { |
| int ch_coding_efficiency = |
| drm_dp_bw_channel_coding_efficiency(drm_dp_is_uhbr_rate(link_rate)); |
| fixed20_12 ret; |
| |
| if (link_rate == 0 || link_lane_count == 0) |
| drm_dbg_kms(mgr->dev, "invalid link rate/lane count: (%d / %d)\n", |
| link_rate, link_lane_count); |
| |
| /* See DP v2.0 2.6.4.2, 2.7.6.3 VCPayload_Bandwidth_for_OneTimeSlotPer_MTP_Allocation */ |
| ret.full = DIV_ROUND_DOWN_ULL(mul_u32_u32(link_rate * link_lane_count, |
| ch_coding_efficiency), |
| (1000000ULL * 8 * 5400) >> 12); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(drm_dp_get_vc_payload_bw); |
| |
| /** |
| * drm_dp_read_mst_cap() - Read the sink's MST mode capability |
| * @aux: The DP AUX channel to use |
| * @dpcd: A cached copy of the DPCD capabilities for this sink |
| * |
| * Returns: enum drm_dp_mst_mode to indicate MST mode capability |
| */ |
| enum drm_dp_mst_mode drm_dp_read_mst_cap(struct drm_dp_aux *aux, |
| const u8 dpcd[DP_RECEIVER_CAP_SIZE]) |
| { |
| u8 mstm_cap; |
| |
| if (dpcd[DP_DPCD_REV] < DP_DPCD_REV_12) |
| return DRM_DP_SST; |
| |
| if (drm_dp_dpcd_readb(aux, DP_MSTM_CAP, &mstm_cap) != 1) |
| return DRM_DP_SST; |
| |
| if (mstm_cap & DP_MST_CAP) |
| return DRM_DP_MST; |
| |
| if (mstm_cap & DP_SINGLE_STREAM_SIDEBAND_MSG) |
| return DRM_DP_SST_SIDEBAND_MSG; |
| |
| return DRM_DP_SST; |
| } |
| EXPORT_SYMBOL(drm_dp_read_mst_cap); |
| |
| /** |
| * drm_dp_mst_topology_mgr_set_mst() - Set the MST state for a topology manager |
| * @mgr: manager to set state for |
| * @mst_state: true to enable MST on this connector - false to disable. |
| * |
| * This is called by the driver when it detects an MST capable device plugged |
| * into a DP MST capable port, or when a DP MST capable device is unplugged. |
| */ |
| int drm_dp_mst_topology_mgr_set_mst(struct drm_dp_mst_topology_mgr *mgr, bool mst_state) |
| { |
| int ret = 0; |
| struct drm_dp_mst_branch *mstb = NULL; |
| |
| mutex_lock(&mgr->lock); |
| if (mst_state == mgr->mst_state) |
| goto out_unlock; |
| |
| mgr->mst_state = mst_state; |
| /* set the device into MST mode */ |
| if (mst_state) { |
| WARN_ON(mgr->mst_primary); |
| |
| /* get dpcd info */ |
| ret = drm_dp_read_dpcd_caps(mgr->aux, mgr->dpcd); |
| if (ret < 0) { |
| drm_dbg_kms(mgr->dev, "%s: failed to read DPCD, ret %d\n", |
| mgr->aux->name, ret); |
| goto out_unlock; |
| } |
| |
| /* add initial branch device at LCT 1 */ |
| mstb = drm_dp_add_mst_branch_device(1, NULL); |
| if (mstb == NULL) { |
| ret = -ENOMEM; |
| goto out_unlock; |
| } |
| mstb->mgr = mgr; |
| |
| /* give this the main reference */ |
| mgr->mst_primary = mstb; |
| drm_dp_mst_topology_get_mstb(mgr->mst_primary); |
| |
| ret = drm_dp_dpcd_writeb(mgr->aux, DP_MSTM_CTRL, |
| DP_MST_EN | |
| DP_UP_REQ_EN | |
| DP_UPSTREAM_IS_SRC); |
| if (ret < 0) |
| goto out_unlock; |
| |
| /* Write reset payload */ |
| drm_dp_dpcd_write_payload(mgr, 0, 0, 0x3f); |
| |
| drm_dp_mst_queue_probe_work(mgr); |
| |
| ret = 0; |
| } else { |
| /* disable MST on the device */ |
| mstb = mgr->mst_primary; |
| mgr->mst_primary = NULL; |
| /* this can fail if the device is gone */ |
| drm_dp_dpcd_writeb(mgr->aux, DP_MSTM_CTRL, 0); |
| ret = 0; |
| mgr->payload_id_table_cleared = false; |
| |
| memset(&mgr->down_rep_recv, 0, sizeof(mgr->down_rep_recv)); |
| memset(&mgr->up_req_recv, 0, sizeof(mgr->up_req_recv)); |
| } |
| |
| out_unlock: |
| mutex_unlock(&mgr->lock); |
| if (mstb) |
| drm_dp_mst_topology_put_mstb(mstb); |
| return ret; |
| |
| } |
| EXPORT_SYMBOL(drm_dp_mst_topology_mgr_set_mst); |
| |
| static void |
| drm_dp_mst_topology_mgr_invalidate_mstb(struct drm_dp_mst_branch *mstb) |
| { |
| struct drm_dp_mst_port *port; |
| |
| /* The link address will need to be re-sent on resume */ |
| mstb->link_address_sent = false; |
| |
| list_for_each_entry(port, &mstb->ports, next) |
| if (port->mstb) |
| drm_dp_mst_topology_mgr_invalidate_mstb(port->mstb); |
| } |
| |
| /** |
| * drm_dp_mst_topology_queue_probe - Queue a topology probe |
| * @mgr: manager to probe |
| * |
| * Queue a work to probe the MST topology. Driver's should call this only to |
| * sync the topology's HW->SW state after the MST link's parameters have |
| * changed in a way the state could've become out-of-sync. This is the case |
| * for instance when the link rate between the source and first downstream |
| * branch device has switched between UHBR and non-UHBR rates. Except of those |
| * cases - for instance when a sink gets plugged/unplugged to a port - the SW |
| * state will get updated automatically via MST UP message notifications. |
| */ |
| void drm_dp_mst_topology_queue_probe(struct drm_dp_mst_topology_mgr *mgr) |
| { |
| mutex_lock(&mgr->lock); |
| |
| if (drm_WARN_ON(mgr->dev, !mgr->mst_state || !mgr->mst_primary)) |
| goto out_unlock; |
| |
| drm_dp_mst_topology_mgr_invalidate_mstb(mgr->mst_primary); |
| drm_dp_mst_queue_probe_work(mgr); |
| |
| out_unlock: |
| mutex_unlock(&mgr->lock); |
| } |
| EXPORT_SYMBOL(drm_dp_mst_topology_queue_probe); |
| |
| /** |
| * drm_dp_mst_topology_mgr_suspend() - suspend the MST manager |
| * @mgr: manager to suspend |
| * |
| * This function tells the MST device that we can't handle UP messages |
| * anymore. This should stop it from sending any since we are suspended. |
| */ |
| void drm_dp_mst_topology_mgr_suspend(struct drm_dp_mst_topology_mgr *mgr) |
| { |
| mutex_lock(&mgr->lock); |
| drm_dp_dpcd_writeb(mgr->aux, DP_MSTM_CTRL, |
| DP_MST_EN | DP_UPSTREAM_IS_SRC); |
| mutex_unlock(&mgr->lock); |
| flush_work(&mgr->up_req_work); |
| flush_work(&mgr->work); |
| flush_work(&mgr->delayed_destroy_work); |
| |
| mutex_lock(&mgr->lock); |
| if (mgr->mst_state && mgr->mst_primary) |
| drm_dp_mst_topology_mgr_invalidate_mstb(mgr->mst_primary); |
| mutex_unlock(&mgr->lock); |
| } |
| EXPORT_SYMBOL(drm_dp_mst_topology_mgr_suspend); |
| |
| /** |
| * drm_dp_mst_topology_mgr_resume() - resume the MST manager |
| * @mgr: manager to resume |
| * @sync: whether or not to perform topology reprobing synchronously |
| * |
| * This will fetch DPCD and see if the device is still there, |
| * if it is, it will rewrite the MSTM control bits, and return. |
| * |
| * If the device fails this returns -1, and the driver should do |
| * a full MST reprobe, in case we were undocked. |
| * |
| * During system resume (where it is assumed that the driver will be calling |
| * drm_atomic_helper_resume()) this function should be called beforehand with |
| * @sync set to true. In contexts like runtime resume where the driver is not |
| * expected to be calling drm_atomic_helper_resume(), this function should be |
| * called with @sync set to false in order to avoid deadlocking. |
| * |
| * Returns: -1 if the MST topology was removed while we were suspended, 0 |
| * otherwise. |
| */ |
| int drm_dp_mst_topology_mgr_resume(struct drm_dp_mst_topology_mgr *mgr, |
| bool sync) |
| { |
| u8 buf[UUID_SIZE]; |
| guid_t guid; |
| int ret; |
| |
| mutex_lock(&mgr->lock); |
| if (!mgr->mst_primary) |
| goto out_fail; |
| |
| if (drm_dp_read_dpcd_caps(mgr->aux, mgr->dpcd) < 0) { |
| drm_dbg_kms(mgr->dev, "dpcd read failed - undocked during suspend?\n"); |
| goto out_fail; |
| } |
| |
| ret = drm_dp_dpcd_writeb(mgr->aux, DP_MSTM_CTRL, |
| DP_MST_EN | |
| DP_UP_REQ_EN | |
| DP_UPSTREAM_IS_SRC); |
| if (ret < 0) { |
| drm_dbg_kms(mgr->dev, "mst write failed - undocked during suspend?\n"); |
| goto out_fail; |
| } |
| |
| /* Some hubs forget their guids after they resume */ |
| ret = drm_dp_dpcd_read(mgr->aux, DP_GUID, buf, sizeof(buf)); |
| if (ret != sizeof(buf)) { |
| drm_dbg_kms(mgr->dev, "dpcd read failed - undocked during suspend?\n"); |
| goto out_fail; |
| } |
| |
| import_guid(&guid, buf); |
| |
| ret = drm_dp_check_mstb_guid(mgr->mst_primary, &guid); |
| if (ret) { |
| drm_dbg_kms(mgr->dev, "check mstb failed - undocked during suspend?\n"); |
| goto out_fail; |
| } |
| |
| /* |
| * For the final step of resuming the topology, we need to bring the |
| * state of our in-memory topology back into sync with reality. So, |
| * restart the probing process as if we're probing a new hub |
| */ |
| drm_dp_mst_queue_probe_work(mgr); |
| mutex_unlock(&mgr->lock); |
| |
| if (sync) { |
| drm_dbg_kms(mgr->dev, |
| "Waiting for link probe work to finish re-syncing topology...\n"); |
| flush_work(&mgr->work); |
| } |
| |
| return 0; |
| |
| out_fail: |
| mutex_unlock(&mgr->lock); |
| return -1; |
| } |
| EXPORT_SYMBOL(drm_dp_mst_topology_mgr_resume); |
| |
| static bool |
| drm_dp_get_one_sb_msg(struct drm_dp_mst_topology_mgr *mgr, bool up, |
| struct drm_dp_mst_branch **mstb) |
| { |
| int len; |
| u8 replyblock[32]; |
| int replylen, curreply; |
| int ret; |
| u8 hdrlen; |
| struct drm_dp_sideband_msg_hdr hdr; |
| struct drm_dp_sideband_msg_rx *msg = |
| up ? &mgr->up_req_recv : &mgr->down_rep_recv; |
| int basereg = up ? DP_SIDEBAND_MSG_UP_REQ_BASE : |
| DP_SIDEBAND_MSG_DOWN_REP_BASE; |
| |
| if (!up) |
| *mstb = NULL; |
| |
| len = min(mgr->max_dpcd_transaction_bytes, 16); |
| ret = drm_dp_dpcd_read(mgr->aux, basereg, replyblock, len); |
| if (ret != len) { |
| drm_dbg_kms(mgr->dev, "failed to read DPCD down rep %d %d\n", len, ret); |
| return false; |
| } |
| |
| ret = drm_dp_decode_sideband_msg_hdr(mgr, &hdr, replyblock, len, &hdrlen); |
| if (ret == false) { |
| print_hex_dump(KERN_DEBUG, "failed hdr", DUMP_PREFIX_NONE, 16, |
| 1, replyblock, len, false); |
| drm_dbg_kms(mgr->dev, "ERROR: failed header\n"); |
| return false; |
| } |
| |
| if (!up) { |
| /* Caller is responsible for giving back this reference */ |
| *mstb = drm_dp_get_mst_branch_device(mgr, hdr.lct, hdr.rad); |
| if (!*mstb) { |
| drm_dbg_kms(mgr->dev, "Got MST reply from unknown device %d\n", hdr.lct); |
| return false; |
| } |
| } |
| |
| if (!drm_dp_sideband_msg_set_header(msg, &hdr, hdrlen)) { |
| drm_dbg_kms(mgr->dev, "sideband msg set header failed %d\n", replyblock[0]); |
| return false; |
| } |
| |
| replylen = min(msg->curchunk_len, (u8)(len - hdrlen)); |
| ret = drm_dp_sideband_append_payload(msg, replyblock + hdrlen, replylen); |
| if (!ret) { |
| drm_dbg_kms(mgr->dev, "sideband msg build failed %d\n", replyblock[0]); |
| return false; |
| } |
| |
| replylen = msg->curchunk_len + msg->curchunk_hdrlen - len; |
| curreply = len; |
| while (replylen > 0) { |
| len = min3(replylen, mgr->max_dpcd_transaction_bytes, 16); |
| ret = drm_dp_dpcd_read(mgr->aux, basereg + curreply, |
| replyblock, len); |
| if (ret != len) { |
| drm_dbg_kms(mgr->dev, "failed to read a chunk (len %d, ret %d)\n", |
| len, ret); |
| return false; |
| } |
| |
| ret = drm_dp_sideband_append_payload(msg, replyblock, len); |
| if (!ret) { |
| drm_dbg_kms(mgr->dev, "failed to build sideband msg\n"); |
| return false; |
| } |
| |
| curreply += len; |
| replylen -= len; |
| } |
| return true; |
| } |
| |
| static int drm_dp_mst_handle_down_rep(struct drm_dp_mst_topology_mgr *mgr) |
| { |
| struct drm_dp_sideband_msg_tx *txmsg; |
| struct drm_dp_mst_branch *mstb = NULL; |
| struct drm_dp_sideband_msg_rx *msg = &mgr->down_rep_recv; |
| |
| if (!drm_dp_get_one_sb_msg(mgr, false, &mstb)) |
| goto out_clear_reply; |
| |
| /* Multi-packet message transmission, don't clear the reply */ |
| if (!msg->have_eomt) |
| goto out; |
| |
| /* find the message */ |
| mutex_lock(&mgr->qlock); |
| txmsg = list_first_entry_or_null(&mgr->tx_msg_downq, |
| struct drm_dp_sideband_msg_tx, next); |
| mutex_unlock(&mgr->qlock); |
| |
| /* Were we actually expecting a response, and from this mstb? */ |
| if (!txmsg || txmsg->dst != mstb) { |
| struct drm_dp_sideband_msg_hdr *hdr; |
| |
| hdr = &msg->initial_hdr; |
| drm_dbg_kms(mgr->dev, "Got MST reply with no msg %p %d %d %02x %02x\n", |
| mstb, hdr->seqno, hdr->lct, hdr->rad[0], msg->msg[0]); |
| goto out_clear_reply; |
| } |
| |
| drm_dp_sideband_parse_reply(mgr, msg, &txmsg->reply); |
| |
| if (txmsg->reply.reply_type == DP_SIDEBAND_REPLY_NAK) { |
| drm_dbg_kms(mgr->dev, |
| "Got NAK reply: req 0x%02x (%s), reason 0x%02x (%s), nak data 0x%02x\n", |
| txmsg->reply.req_type, |
| drm_dp_mst_req_type_str(txmsg->reply.req_type), |
| txmsg->reply.u.nak.reason, |
| drm_dp_mst_nak_reason_str(txmsg->reply.u.nak.reason), |
| txmsg->reply.u.nak.nak_data); |
| } |
| |
| memset(msg, 0, sizeof(struct drm_dp_sideband_msg_rx)); |
| drm_dp_mst_topology_put_mstb(mstb); |
| |
| mutex_lock(&mgr->qlock); |
| txmsg->state = DRM_DP_SIDEBAND_TX_RX; |
| list_del(&txmsg->next); |
| mutex_unlock(&mgr->qlock); |
| |
| wake_up_all(&mgr->tx_waitq); |
| |
| return 0; |
| |
| out_clear_reply: |
| memset(msg, 0, sizeof(struct drm_dp_sideband_msg_rx)); |
| out: |
| if (mstb) |
| drm_dp_mst_topology_put_mstb(mstb); |
| |
| return 0; |
| } |
| |
| static inline bool |
| drm_dp_mst_process_up_req(struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_pending_up_req *up_req) |
| { |
| struct drm_dp_mst_branch *mstb = NULL; |
| struct drm_dp_sideband_msg_req_body *msg = &up_req->msg; |
| struct drm_dp_sideband_msg_hdr *hdr = &up_req->hdr; |
| bool hotplug = false, dowork = false; |
| |
| if (hdr->broadcast) { |
| const guid_t *guid = NULL; |
| |
| if (msg->req_type == DP_CONNECTION_STATUS_NOTIFY) |
| guid = &msg->u.conn_stat.guid; |
| else if (msg->req_type == DP_RESOURCE_STATUS_NOTIFY) |
| guid = &msg->u.resource_stat.guid; |
| |
| if (guid) |
| mstb = drm_dp_get_mst_branch_device_by_guid(mgr, guid); |
| } else { |
| mstb = drm_dp_get_mst_branch_device(mgr, hdr->lct, hdr->rad); |
| } |
| |
| if (!mstb) { |
| drm_dbg_kms(mgr->dev, "Got MST reply from unknown device %d\n", hdr->lct); |
| return false; |
| } |
| |
| /* TODO: Add missing handler for DP_RESOURCE_STATUS_NOTIFY events */ |
| if (msg->req_type == DP_CONNECTION_STATUS_NOTIFY) { |
| dowork = drm_dp_mst_handle_conn_stat(mstb, &msg->u.conn_stat); |
| hotplug = true; |
| } |
| |
| drm_dp_mst_topology_put_mstb(mstb); |
| |
| if (dowork) |
| queue_work(system_long_wq, &mgr->work); |
| return hotplug; |
| } |
| |
| static void drm_dp_mst_up_req_work(struct work_struct *work) |
| { |
| struct drm_dp_mst_topology_mgr *mgr = |
| container_of(work, struct drm_dp_mst_topology_mgr, |
| up_req_work); |
| struct drm_dp_pending_up_req *up_req; |
| bool send_hotplug = false; |
| |
| mutex_lock(&mgr->probe_lock); |
| while (true) { |
| mutex_lock(&mgr->up_req_lock); |
| up_req = list_first_entry_or_null(&mgr->up_req_list, |
| struct drm_dp_pending_up_req, |
| next); |
| if (up_req) |
| list_del(&up_req->next); |
| mutex_unlock(&mgr->up_req_lock); |
| |
| if (!up_req) |
| break; |
| |
| send_hotplug |= drm_dp_mst_process_up_req(mgr, up_req); |
| kfree(up_req); |
| } |
| mutex_unlock(&mgr->probe_lock); |
| |
| if (send_hotplug) |
| drm_kms_helper_hotplug_event(mgr->dev); |
| } |
| |
| static int drm_dp_mst_handle_up_req(struct drm_dp_mst_topology_mgr *mgr) |
| { |
| struct drm_dp_pending_up_req *up_req; |
| |
| if (!drm_dp_get_one_sb_msg(mgr, true, NULL)) |
| goto out; |
| |
| if (!mgr->up_req_recv.have_eomt) |
| return 0; |
| |
| up_req = kzalloc(sizeof(*up_req), GFP_KERNEL); |
| if (!up_req) |
| return -ENOMEM; |
| |
| INIT_LIST_HEAD(&up_req->next); |
| |
| drm_dp_sideband_parse_req(mgr, &mgr->up_req_recv, &up_req->msg); |
| |
| if (up_req->msg.req_type != DP_CONNECTION_STATUS_NOTIFY && |
| up_req->msg.req_type != DP_RESOURCE_STATUS_NOTIFY) { |
| drm_dbg_kms(mgr->dev, "Received unknown up req type, ignoring: %x\n", |
| up_req->msg.req_type); |
| kfree(up_req); |
| goto out; |
| } |
| |
| drm_dp_send_up_ack_reply(mgr, mgr->mst_primary, up_req->msg.req_type, |
| false); |
| |
| if (up_req->msg.req_type == DP_CONNECTION_STATUS_NOTIFY) { |
| const struct drm_dp_connection_status_notify *conn_stat = |
| &up_req->msg.u.conn_stat; |
| bool handle_csn; |
| |
| drm_dbg_kms(mgr->dev, "Got CSN: pn: %d ldps:%d ddps: %d mcs: %d ip: %d pdt: %d\n", |
| conn_stat->port_number, |
| conn_stat->legacy_device_plug_status, |
| conn_stat->displayport_device_plug_status, |
| conn_stat->message_capability_status, |
| conn_stat->input_port, |
| conn_stat->peer_device_type); |
| |
| mutex_lock(&mgr->probe_lock); |
| handle_csn = mgr->mst_primary->link_address_sent; |
| mutex_unlock(&mgr->probe_lock); |
| |
| if (!handle_csn) { |
| drm_dbg_kms(mgr->dev, "Got CSN before finish topology probing. Skip it."); |
| kfree(up_req); |
| goto out; |
| } |
| } else if (up_req->msg.req_type == DP_RESOURCE_STATUS_NOTIFY) { |
| const struct drm_dp_resource_status_notify *res_stat = |
| &up_req->msg.u.resource_stat; |
| |
| drm_dbg_kms(mgr->dev, "Got RSN: pn: %d avail_pbn %d\n", |
| res_stat->port_number, |
| res_stat->available_pbn); |
| } |
| |
| up_req->hdr = mgr->up_req_recv.initial_hdr; |
| mutex_lock(&mgr->up_req_lock); |
| list_add_tail(&up_req->next, &mgr->up_req_list); |
| mutex_unlock(&mgr->up_req_lock); |
| queue_work(system_long_wq, &mgr->up_req_work); |
| |
| out: |
| memset(&mgr->up_req_recv, 0, sizeof(struct drm_dp_sideband_msg_rx)); |
| return 0; |
| } |
| |
| /** |
| * drm_dp_mst_hpd_irq_handle_event() - MST hotplug IRQ handle MST event |
| * @mgr: manager to notify irq for. |
| * @esi: 4 bytes from SINK_COUNT_ESI |
| * @ack: 4 bytes used to ack events starting from SINK_COUNT_ESI |
| * @handled: whether the hpd interrupt was consumed or not |
| * |
| * This should be called from the driver when it detects a HPD IRQ, |
| * along with the value of the DEVICE_SERVICE_IRQ_VECTOR_ESI0. The |
| * topology manager will process the sideband messages received |
| * as indicated in the DEVICE_SERVICE_IRQ_VECTOR_ESI0 and set the |
| * corresponding flags that Driver has to ack the DP receiver later. |
| * |
| * Note that driver shall also call |
| * drm_dp_mst_hpd_irq_send_new_request() if the 'handled' is set |
| * after calling this function, to try to kick off a new request in |
| * the queue if the previous message transaction is completed. |
| * |
| * See also: |
| * drm_dp_mst_hpd_irq_send_new_request() |
| */ |
| int drm_dp_mst_hpd_irq_handle_event(struct drm_dp_mst_topology_mgr *mgr, const u8 *esi, |
| u8 *ack, bool *handled) |
| { |
| int ret = 0; |
| int sc; |
| *handled = false; |
| sc = DP_GET_SINK_COUNT(esi[0]); |
| |
| if (sc != mgr->sink_count) { |
| mgr->sink_count = sc; |
| *handled = true; |
| } |
| |
| if (esi[1] & DP_DOWN_REP_MSG_RDY) { |
| ret = drm_dp_mst_handle_down_rep(mgr); |
| *handled = true; |
| ack[1] |= DP_DOWN_REP_MSG_RDY; |
| } |
| |
| if (esi[1] & DP_UP_REQ_MSG_RDY) { |
| ret |= drm_dp_mst_handle_up_req(mgr); |
| *handled = true; |
| ack[1] |= DP_UP_REQ_MSG_RDY; |
| } |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(drm_dp_mst_hpd_irq_handle_event); |
| |
| /** |
| * drm_dp_mst_hpd_irq_send_new_request() - MST hotplug IRQ kick off new request |
| * @mgr: manager to notify irq for. |
| * |
| * This should be called from the driver when mst irq event is handled |
| * and acked. Note that new down request should only be sent when |
| * previous message transaction is completed. Source is not supposed to generate |
| * interleaved message transactions. |
| */ |
| void drm_dp_mst_hpd_irq_send_new_request(struct drm_dp_mst_topology_mgr *mgr) |
| { |
| struct drm_dp_sideband_msg_tx *txmsg; |
| bool kick = true; |
| |
| mutex_lock(&mgr->qlock); |
| txmsg = list_first_entry_or_null(&mgr->tx_msg_downq, |
| struct drm_dp_sideband_msg_tx, next); |
| /* If last transaction is not completed yet*/ |
| if (!txmsg || |
| txmsg->state == DRM_DP_SIDEBAND_TX_START_SEND || |
| txmsg->state == DRM_DP_SIDEBAND_TX_SENT) |
| kick = false; |
| mutex_unlock(&mgr->qlock); |
| |
| if (kick) |
| drm_dp_mst_kick_tx(mgr); |
| } |
| EXPORT_SYMBOL(drm_dp_mst_hpd_irq_send_new_request); |
| /** |
| * drm_dp_mst_detect_port() - get connection status for an MST port |
| * @connector: DRM connector for this port |
| * @ctx: The acquisition context to use for grabbing locks |
| * @mgr: manager for this port |
| * @port: pointer to a port |
| * |
| * This returns the current connection state for a port. |
| */ |
| int |
| drm_dp_mst_detect_port(struct drm_connector *connector, |
| struct drm_modeset_acquire_ctx *ctx, |
| struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_port *port) |
| { |
| int ret; |
| |
| /* we need to search for the port in the mgr in case it's gone */ |
| port = drm_dp_mst_topology_get_port_validated(mgr, port); |
| if (!port) |
| return connector_status_disconnected; |
| |
| ret = drm_modeset_lock(&mgr->base.lock, ctx); |
| if (ret) |
| goto out; |
| |
| ret = connector_status_disconnected; |
| |
| if (!port->ddps) |
| goto out; |
| |
| switch (port->pdt) { |
| case DP_PEER_DEVICE_NONE: |
| break; |
| case DP_PEER_DEVICE_MST_BRANCHING: |
| if (!port->mcs) |
| ret = connector_status_connected; |
| break; |
| |
| case DP_PEER_DEVICE_SST_SINK: |
| ret = connector_status_connected; |
| /* for logical ports - cache the EDID */ |
| if (drm_dp_mst_port_is_logical(port) && !port->cached_edid) |
| port->cached_edid = drm_edid_read_ddc(connector, &port->aux.ddc); |
| break; |
| case DP_PEER_DEVICE_DP_LEGACY_CONV: |
| if (port->ldps) |
| ret = connector_status_connected; |
| break; |
| } |
| out: |
| drm_dp_mst_topology_put_port(port); |
| return ret; |
| } |
| EXPORT_SYMBOL(drm_dp_mst_detect_port); |
| |
| /** |
| * drm_dp_mst_edid_read() - get EDID for an MST port |
| * @connector: toplevel connector to get EDID for |
| * @mgr: manager for this port |
| * @port: unverified pointer to a port. |
| * |
| * This returns an EDID for the port connected to a connector, |
| * It validates the pointer still exists so the caller doesn't require a |
| * reference. |
| */ |
| const struct drm_edid *drm_dp_mst_edid_read(struct drm_connector *connector, |
| struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_port *port) |
| { |
| const struct drm_edid *drm_edid; |
| |
| /* we need to search for the port in the mgr in case it's gone */ |
| port = drm_dp_mst_topology_get_port_validated(mgr, port); |
| if (!port) |
| return NULL; |
| |
| if (port->cached_edid) |
| drm_edid = drm_edid_dup(port->cached_edid); |
| else |
| drm_edid = drm_edid_read_ddc(connector, &port->aux.ddc); |
| |
| drm_dp_mst_topology_put_port(port); |
| |
| return drm_edid; |
| } |
| EXPORT_SYMBOL(drm_dp_mst_edid_read); |
| |
| /** |
| * drm_dp_mst_get_edid() - get EDID for an MST port |
| * @connector: toplevel connector to get EDID for |
| * @mgr: manager for this port |
| * @port: unverified pointer to a port. |
| * |
| * This function is deprecated; please use drm_dp_mst_edid_read() instead. |
| * |
| * This returns an EDID for the port connected to a connector, |
| * It validates the pointer still exists so the caller doesn't require a |
| * reference. |
| */ |
| struct edid *drm_dp_mst_get_edid(struct drm_connector *connector, |
| struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_port *port) |
| { |
| const struct drm_edid *drm_edid; |
| struct edid *edid; |
| |
| drm_edid = drm_dp_mst_edid_read(connector, mgr, port); |
| |
| edid = drm_edid_duplicate(drm_edid_raw(drm_edid)); |
| |
| drm_edid_free(drm_edid); |
| |
| return edid; |
| } |
| EXPORT_SYMBOL(drm_dp_mst_get_edid); |
| |
| /** |
| * drm_dp_atomic_find_time_slots() - Find and add time slots to the state |
| * @state: global atomic state |
| * @mgr: MST topology manager for the port |
| * @port: port to find time slots for |
| * @pbn: bandwidth required for the mode in PBN |
| * |
| * Allocates time slots to @port, replacing any previous time slot allocations it may |
| * have had. Any atomic drivers which support MST must call this function in |
| * their &drm_encoder_helper_funcs.atomic_check() callback unconditionally to |
| * change the current time slot allocation for the new state, and ensure the MST |
| * atomic state is added whenever the state of payloads in the topology changes. |
| * |
| * Allocations set by this function are not checked against the bandwidth |
| * restraints of @mgr until the driver calls drm_dp_mst_atomic_check(). |
| * |
| * Additionally, it is OK to call this function multiple times on the same |
| * @port as needed. It is not OK however, to call this function and |
| * drm_dp_atomic_release_time_slots() in the same atomic check phase. |
| * |
| * See also: |
| * drm_dp_atomic_release_time_slots() |
| * drm_dp_mst_atomic_check() |
| * |
| * Returns: |
| * Total slots in the atomic state assigned for this port, or a negative error |
| * code if the port no longer exists |
| */ |
| int drm_dp_atomic_find_time_slots(struct drm_atomic_state *state, |
| struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_port *port, int pbn) |
| { |
| struct drm_dp_mst_topology_state *topology_state; |
| struct drm_dp_mst_atomic_payload *payload = NULL; |
| struct drm_connector_state *conn_state; |
| int prev_slots = 0, prev_bw = 0, req_slots; |
| |
| topology_state = drm_atomic_get_mst_topology_state(state, mgr); |
| if (IS_ERR(topology_state)) |
| return PTR_ERR(topology_state); |
| |
| conn_state = drm_atomic_get_new_connector_state(state, port->connector); |
| topology_state->pending_crtc_mask |= drm_crtc_mask(conn_state->crtc); |
| |
| /* Find the current allocation for this port, if any */ |
| payload = drm_atomic_get_mst_payload_state(topology_state, port); |
| if (payload) { |
| prev_slots = payload->time_slots; |
| prev_bw = payload->pbn; |
| |
| /* |
| * This should never happen, unless the driver tries |
| * releasing and allocating the same timeslot allocation, |
| * which is an error |
| */ |
| if (drm_WARN_ON(mgr->dev, payload->delete)) { |
| drm_err(mgr->dev, |
| "cannot allocate and release time slots on [MST PORT:%p] in the same state\n", |
| port); |
| return -EINVAL; |
| } |
| } |
| |
| req_slots = DIV_ROUND_UP(dfixed_const(pbn), topology_state->pbn_div.full); |
| |
| drm_dbg_atomic(mgr->dev, "[CONNECTOR:%d:%s] [MST PORT:%p] TU %d -> %d\n", |
| port->connector->base.id, port->connector->name, |
| port, prev_slots, req_slots); |
| drm_dbg_atomic(mgr->dev, "[CONNECTOR:%d:%s] [MST PORT:%p] PBN %d -> %d\n", |
| port->connector->base.id, port->connector->name, |
| port, prev_bw, pbn); |
| |
| /* Add the new allocation to the state, note the VCPI isn't assigned until the end */ |
| if (!payload) { |
| payload = kzalloc(sizeof(*payload), GFP_KERNEL); |
| if (!payload) |
| return -ENOMEM; |
| |
| drm_dp_mst_get_port_malloc(port); |
| payload->port = port; |
| payload->vc_start_slot = -1; |
| payload->payload_allocation_status = DRM_DP_MST_PAYLOAD_ALLOCATION_NONE; |
| list_add(&payload->next, &topology_state->payloads); |
| } |
| payload->time_slots = req_slots; |
| payload->pbn = pbn; |
| |
| return req_slots; |
| } |
| EXPORT_SYMBOL(drm_dp_atomic_find_time_slots); |
| |
| /** |
| * drm_dp_atomic_release_time_slots() - Release allocated time slots |
| * @state: global atomic state |
| * @mgr: MST topology manager for the port |
| * @port: The port to release the time slots from |
| * |
| * Releases any time slots that have been allocated to a port in the atomic |
| * state. Any atomic drivers which support MST must call this function |
| * unconditionally in their &drm_connector_helper_funcs.atomic_check() callback. |
| * This helper will check whether time slots would be released by the new state and |
| * respond accordingly, along with ensuring the MST state is always added to the |
| * atomic state whenever a new state would modify the state of payloads on the |
| * topology. |
| * |
| * It is OK to call this even if @port has been removed from the system. |
| * Additionally, it is OK to call this function multiple times on the same |
| * @port as needed. It is not OK however, to call this function and |
| * drm_dp_atomic_find_time_slots() on the same @port in a single atomic check |
| * phase. |
| * |
| * See also: |
| * drm_dp_atomic_find_time_slots() |
| * drm_dp_mst_atomic_check() |
| * |
| * Returns: |
| * 0 on success, negative error code otherwise |
| */ |
| int drm_dp_atomic_release_time_slots(struct drm_atomic_state *state, |
| struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_port *port) |
| { |
| struct drm_dp_mst_topology_state *topology_state; |
| struct drm_dp_mst_atomic_payload *payload; |
| struct drm_connector_state *old_conn_state, *new_conn_state; |
| bool update_payload = true; |
| |
| old_conn_state = drm_atomic_get_old_connector_state(state, port->connector); |
| if (!old_conn_state->crtc) |
| return 0; |
| |
| /* If the CRTC isn't disabled by this state, don't release it's payload */ |
| new_conn_state = drm_atomic_get_new_connector_state(state, port->connector); |
| if (new_conn_state->crtc) { |
| struct drm_crtc_state *crtc_state = |
| drm_atomic_get_new_crtc_state(state, new_conn_state->crtc); |
| |
| /* No modeset means no payload changes, so it's safe to not pull in the MST state */ |
| if (!crtc_state || !drm_atomic_crtc_needs_modeset(crtc_state)) |
| return 0; |
| |
| if (!crtc_state->mode_changed && !crtc_state->connectors_changed) |
| update_payload = false; |
| } |
| |
| topology_state = drm_atomic_get_mst_topology_state(state, mgr); |
| if (IS_ERR(topology_state)) |
| return PTR_ERR(topology_state); |
| |
| topology_state->pending_crtc_mask |= drm_crtc_mask(old_conn_state->crtc); |
| if (!update_payload) |
| return 0; |
| |
| payload = drm_atomic_get_mst_payload_state(topology_state, port); |
| if (WARN_ON(!payload)) { |
| drm_err(mgr->dev, "No payload for [MST PORT:%p] found in mst state %p\n", |
| port, &topology_state->base); |
| return -EINVAL; |
| } |
| |
| if (new_conn_state->crtc) |
| return 0; |
| |
| drm_dbg_atomic(mgr->dev, "[MST PORT:%p] TU %d -> 0\n", port, payload->time_slots); |
| if (!payload->delete) { |
| payload->pbn = 0; |
| payload->delete = true; |
| topology_state->payload_mask &= ~BIT(payload->vcpi - 1); |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(drm_dp_atomic_release_time_slots); |
| |
| /** |
| * drm_dp_mst_atomic_setup_commit() - setup_commit hook for MST helpers |
| * @state: global atomic state |
| * |
| * This function saves all of the &drm_crtc_commit structs in an atomic state that touch any CRTCs |
| * currently assigned to an MST topology. Drivers must call this hook from their |
| * &drm_mode_config_helper_funcs.atomic_commit_setup hook. |
| * |
| * Returns: |
| * 0 if all CRTC commits were retrieved successfully, negative error code otherwise |
| */ |
| int drm_dp_mst_atomic_setup_commit(struct drm_atomic_state *state) |
| { |
| struct drm_dp_mst_topology_mgr *mgr; |
| struct drm_dp_mst_topology_state *mst_state; |
| struct drm_crtc *crtc; |
| struct drm_crtc_state *crtc_state; |
| int i, j, commit_idx, num_commit_deps; |
| |
| for_each_new_mst_mgr_in_state(state, mgr, mst_state, i) { |
| if (!mst_state->pending_crtc_mask) |
| continue; |
| |
| num_commit_deps = hweight32(mst_state->pending_crtc_mask); |
| mst_state->commit_deps = kmalloc_array(num_commit_deps, |
| sizeof(*mst_state->commit_deps), GFP_KERNEL); |
| if (!mst_state->commit_deps) |
| return -ENOMEM; |
| mst_state->num_commit_deps = num_commit_deps; |
| |
| commit_idx = 0; |
| for_each_new_crtc_in_state(state, crtc, crtc_state, j) { |
| if (mst_state->pending_crtc_mask & drm_crtc_mask(crtc)) { |
| mst_state->commit_deps[commit_idx++] = |
| drm_crtc_commit_get(crtc_state->commit); |
| } |
| } |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(drm_dp_mst_atomic_setup_commit); |
| |
| /** |
| * drm_dp_mst_atomic_wait_for_dependencies() - Wait for all pending commits on MST topologies, |
| * prepare new MST state for commit |
| * @state: global atomic state |
| * |
| * Goes through any MST topologies in this atomic state, and waits for any pending commits which |
| * touched CRTCs that were/are on an MST topology to be programmed to hardware and flipped to before |
| * returning. This is to prevent multiple non-blocking commits affecting an MST topology from racing |
| * with eachother by forcing them to be executed sequentially in situations where the only resources |
| * the modeset objects in these commits share are an MST topology. |
| * |
| * This function also prepares the new MST state for commit by performing some state preparation |
| * which can't be done until this point, such as reading back the final VC start slots (which are |
| * determined at commit-time) from the previous state. |
| * |
| * All MST drivers must call this function after calling drm_atomic_helper_wait_for_dependencies(), |
| * or whatever their equivalent of that is. |
| */ |
| void drm_dp_mst_atomic_wait_for_dependencies(struct drm_atomic_state *state) |
| { |
| struct drm_dp_mst_topology_state *old_mst_state, *new_mst_state; |
| struct drm_dp_mst_topology_mgr *mgr; |
| struct drm_dp_mst_atomic_payload *old_payload, *new_payload; |
| int i, j, ret; |
| |
| for_each_oldnew_mst_mgr_in_state(state, mgr, old_mst_state, new_mst_state, i) { |
| for (j = 0; j < old_mst_state->num_commit_deps; j++) { |
| ret = drm_crtc_commit_wait(old_mst_state->commit_deps[j]); |
| if (ret < 0) |
| drm_err(state->dev, "Failed to wait for %s: %d\n", |
| old_mst_state->commit_deps[j]->crtc->name, ret); |
| } |
| |
| /* Now that previous state is committed, it's safe to copy over the start slot |
| * and allocation status assignments |
| */ |
| list_for_each_entry(old_payload, &old_mst_state->payloads, next) { |
| if (old_payload->delete) |
| continue; |
| |
| new_payload = drm_atomic_get_mst_payload_state(new_mst_state, |
| old_payload->port); |
| new_payload->vc_start_slot = old_payload->vc_start_slot; |
| new_payload->payload_allocation_status = |
| old_payload->payload_allocation_status; |
| } |
| } |
| } |
| EXPORT_SYMBOL(drm_dp_mst_atomic_wait_for_dependencies); |
| |
| /** |
| * drm_dp_mst_root_conn_atomic_check() - Serialize CRTC commits on MST-capable connectors operating |
| * in SST mode |
| * @new_conn_state: The new connector state of the &drm_connector |
| * @mgr: The MST topology manager for the &drm_connector |
| * |
| * Since MST uses fake &drm_encoder structs, the generic atomic modesetting code isn't able to |
| * serialize non-blocking commits happening on the real DP connector of an MST topology switching |
| * into/away from MST mode - as the CRTC on the real DP connector and the CRTCs on the connector's |
| * MST topology will never share the same &drm_encoder. |
| * |
| * This function takes care of this serialization issue, by checking a root MST connector's atomic |
| * state to determine if it is about to have a modeset - and then pulling in the MST topology state |
| * if so, along with adding any relevant CRTCs to &drm_dp_mst_topology_state.pending_crtc_mask. |
| * |
| * Drivers implementing MST must call this function from the |
| * &drm_connector_helper_funcs.atomic_check hook of any physical DP &drm_connector capable of |
| * driving MST sinks. |
| * |
| * Returns: |
| * 0 on success, negative error code otherwise |
| */ |
| int drm_dp_mst_root_conn_atomic_check(struct drm_connector_state *new_conn_state, |
| struct drm_dp_mst_topology_mgr *mgr) |
| { |
| struct drm_atomic_state *state = new_conn_state->state; |
| struct drm_connector_state *old_conn_state = |
| drm_atomic_get_old_connector_state(state, new_conn_state->connector); |
| struct drm_crtc_state *crtc_state; |
| struct drm_dp_mst_topology_state *mst_state = NULL; |
| |
| if (new_conn_state->crtc) { |
| crtc_state = drm_atomic_get_new_crtc_state(state, new_conn_state->crtc); |
| if (crtc_state && drm_atomic_crtc_needs_modeset(crtc_state)) { |
| mst_state = drm_atomic_get_mst_topology_state(state, mgr); |
| if (IS_ERR(mst_state)) |
| return PTR_ERR(mst_state); |
| |
| mst_state->pending_crtc_mask |= drm_crtc_mask(new_conn_state->crtc); |
| } |
| } |
| |
| if (old_conn_state->crtc) { |
| crtc_state = drm_atomic_get_new_crtc_state(state, old_conn_state->crtc); |
| if (crtc_state && drm_atomic_crtc_needs_modeset(crtc_state)) { |
| if (!mst_state) { |
| mst_state = drm_atomic_get_mst_topology_state(state, mgr); |
| if (IS_ERR(mst_state)) |
| return PTR_ERR(mst_state); |
| } |
| |
| mst_state->pending_crtc_mask |= drm_crtc_mask(old_conn_state->crtc); |
| } |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(drm_dp_mst_root_conn_atomic_check); |
| |
| /** |
| * drm_dp_mst_update_slots() - updates the slot info depending on the DP ecoding format |
| * @mst_state: mst_state to update |
| * @link_encoding_cap: the ecoding format on the link |
| */ |
| void drm_dp_mst_update_slots(struct drm_dp_mst_topology_state *mst_state, uint8_t link_encoding_cap) |
| { |
| if (link_encoding_cap == DP_CAP_ANSI_128B132B) { |
| mst_state->total_avail_slots = 64; |
| mst_state->start_slot = 0; |
| } else { |
| mst_state->total_avail_slots = 63; |
| mst_state->start_slot = 1; |
| } |
| |
| DRM_DEBUG_KMS("%s encoding format on mst_state 0x%p\n", |
| (link_encoding_cap == DP_CAP_ANSI_128B132B) ? "128b/132b":"8b/10b", |
| mst_state); |
| } |
| EXPORT_SYMBOL(drm_dp_mst_update_slots); |
| |
| static int drm_dp_dpcd_write_payload(struct drm_dp_mst_topology_mgr *mgr, |
| int id, u8 start_slot, u8 num_slots) |
| { |
| u8 payload_alloc[3], status; |
| int ret; |
| int retries = 0; |
| |
| drm_dp_dpcd_writeb(mgr->aux, DP_PAYLOAD_TABLE_UPDATE_STATUS, |
| DP_PAYLOAD_TABLE_UPDATED); |
| |
| payload_alloc[0] = id; |
| payload_alloc[1] = start_slot; |
| payload_alloc[2] = num_slots; |
| |
| ret = drm_dp_dpcd_write(mgr->aux, DP_PAYLOAD_ALLOCATE_SET, payload_alloc, 3); |
| if (ret != 3) { |
| drm_dbg_kms(mgr->dev, "failed to write payload allocation %d\n", ret); |
| goto fail; |
| } |
| |
| retry: |
| ret = drm_dp_dpcd_readb(mgr->aux, DP_PAYLOAD_TABLE_UPDATE_STATUS, &status); |
| if (ret < 0) { |
| drm_dbg_kms(mgr->dev, "failed to read payload table status %d\n", ret); |
| goto fail; |
| } |
| |
| if (!(status & DP_PAYLOAD_TABLE_UPDATED)) { |
| retries++; |
| if (retries < 20) { |
| usleep_range(10000, 20000); |
| goto retry; |
| } |
| drm_dbg_kms(mgr->dev, "status not set after read payload table status %d\n", |
| status); |
| ret = -EINVAL; |
| goto fail; |
| } |
| ret = 0; |
| fail: |
| return ret; |
| } |
| |
| static int do_get_act_status(struct drm_dp_aux *aux) |
| { |
| int ret; |
| u8 status; |
| |
| ret = drm_dp_dpcd_readb(aux, DP_PAYLOAD_TABLE_UPDATE_STATUS, &status); |
| if (ret < 0) |
| return ret; |
| |
| return status; |
| } |
| |
| /** |
| * drm_dp_check_act_status() - Polls for ACT handled status. |
| * @mgr: manager to use |
| * |
| * Tries waiting for the MST hub to finish updating it's payload table by |
| * polling for the ACT handled bit for up to 3 seconds (yes-some hubs really |
| * take that long). |
| * |
| * Returns: |
| * 0 if the ACT was handled in time, negative error code on failure. |
| */ |
| int drm_dp_check_act_status(struct drm_dp_mst_topology_mgr *mgr) |
| { |
| /* |
| * There doesn't seem to be any recommended retry count or timeout in |
| * the MST specification. Since some hubs have been observed to take |
| * over 1 second to update their payload allocations under certain |
| * conditions, we use a rather large timeout value. |
| */ |
| const int timeout_ms = 3000; |
| int ret, status; |
| |
| ret = readx_poll_timeout(do_get_act_status, mgr->aux, status, |
| status & DP_PAYLOAD_ACT_HANDLED || status < 0, |
| 200, timeout_ms * USEC_PER_MSEC); |
| if (ret < 0 && status >= 0) { |
| drm_err(mgr->dev, "Failed to get ACT after %dms, last status: %02x\n", |
| timeout_ms, status); |
| return -EINVAL; |
| } else if (status < 0) { |
| /* |
| * Failure here isn't unexpected - the hub may have |
| * just been unplugged |
| */ |
| drm_dbg_kms(mgr->dev, "Failed to read payload table status: %d\n", status); |
| return status; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(drm_dp_check_act_status); |
| |
| /** |
| * drm_dp_calc_pbn_mode() - Calculate the PBN for a mode. |
| * @clock: dot clock |
| * @bpp: bpp as .4 binary fixed point |
| * |
| * This uses the formula in the spec to calculate the PBN value for a mode. |
| */ |
| int drm_dp_calc_pbn_mode(int clock, int bpp) |
| { |
| /* |
| * The unit of 54/64Mbytes/sec is an arbitrary unit chosen based on |
| * common multiplier to render an integer PBN for all link rate/lane |
| * counts combinations |
| * calculate |
| * peak_kbps = clock * bpp / 16 |
| * peak_kbps *= SSC overhead / 1000000 |
| * peak_kbps /= 8 convert to Kbytes |
| * peak_kBps *= (64/54) / 1000 convert to PBN |
| */ |
| /* |
| * TODO: Use the actual link and mode parameters to calculate |
| * the overhead. For now it's assumed that these are |
| * 4 link lanes, 4096 hactive pixels, which don't add any |
| * significant data padding overhead and that there is no DSC |
| * or FEC overhead. |
| */ |
| int overhead = drm_dp_bw_overhead(4, 4096, 0, bpp, |
| DRM_DP_BW_OVERHEAD_MST | |
| DRM_DP_BW_OVERHEAD_SSC_REF_CLK); |
| |
| return DIV64_U64_ROUND_UP(mul_u32_u32(clock * bpp, 64 * overhead >> 4), |
| 1000000ULL * 8 * 54 * 1000); |
| } |
| EXPORT_SYMBOL(drm_dp_calc_pbn_mode); |
| |
| /* we want to kick the TX after we've ack the up/down IRQs. */ |
| static void drm_dp_mst_kick_tx(struct drm_dp_mst_topology_mgr *mgr) |
| { |
| queue_work(system_long_wq, &mgr->tx_work); |
| } |
| |
| /* |
| * Helper function for parsing DP device types into convenient strings |
| * for use with dp_mst_topology |
| */ |
| static const char *pdt_to_string(u8 pdt) |
| { |
| switch (pdt) { |
| case DP_PEER_DEVICE_NONE: |
| return "NONE"; |
| case DP_PEER_DEVICE_SOURCE_OR_SST: |
| return "SOURCE OR SST"; |
| case DP_PEER_DEVICE_MST_BRANCHING: |
| return "MST BRANCHING"; |
| case DP_PEER_DEVICE_SST_SINK: |
| return "SST SINK"; |
| case DP_PEER_DEVICE_DP_LEGACY_CONV: |
| return "DP LEGACY CONV"; |
| default: |
| return "ERR"; |
| } |
| } |
| |
| static void drm_dp_mst_dump_mstb(struct seq_file *m, |
| struct drm_dp_mst_branch *mstb) |
| { |
| struct drm_dp_mst_port *port; |
| int tabs = mstb->lct; |
| char prefix[10]; |
| int i; |
| |
| for (i = 0; i < tabs; i++) |
| prefix[i] = '\t'; |
| prefix[i] = '\0'; |
| |
| seq_printf(m, "%smstb - [%p]: num_ports: %d\n", prefix, mstb, mstb->num_ports); |
| list_for_each_entry(port, &mstb->ports, next) { |
| seq_printf(m, "%sport %d - [%p] (%s - %s): ddps: %d, ldps: %d, sdp: %d/%d, fec: %s, conn: %p\n", |
| prefix, |
| port->port_num, |
| port, |
| port->input ? "input" : "output", |
| pdt_to_string(port->pdt), |
| port->ddps, |
| port->ldps, |
| port->num_sdp_streams, |
| port->num_sdp_stream_sinks, |
| port->fec_capable ? "true" : "false", |
| port->connector); |
| if (port->mstb) |
| drm_dp_mst_dump_mstb(m, port->mstb); |
| } |
| } |
| |
| #define DP_PAYLOAD_TABLE_SIZE 64 |
| |
| static bool dump_dp_payload_table(struct drm_dp_mst_topology_mgr *mgr, |
| char *buf) |
| { |
| int i; |
| |
| for (i = 0; i < DP_PAYLOAD_TABLE_SIZE; i += 16) { |
| if (drm_dp_dpcd_read(mgr->aux, |
| DP_PAYLOAD_TABLE_UPDATE_STATUS + i, |
| &buf[i], 16) != 16) |
| return false; |
| } |
| return true; |
| } |
| |
| static void fetch_monitor_name(struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_port *port, char *name, |
| int namelen) |
| { |
| struct edid *mst_edid; |
| |
| mst_edid = drm_dp_mst_get_edid(port->connector, mgr, port); |
| drm_edid_get_monitor_name(mst_edid, name, namelen); |
| kfree(mst_edid); |
| } |
| |
| /** |
| * drm_dp_mst_dump_topology(): dump topology to seq file. |
| * @m: seq_file to dump output to |
| * @mgr: manager to dump current topology for. |
| * |
| * helper to dump MST topology to a seq file for debugfs. |
| */ |
| void drm_dp_mst_dump_topology(struct seq_file *m, |
| struct drm_dp_mst_topology_mgr *mgr) |
| { |
| struct drm_dp_mst_topology_state *state; |
| struct drm_dp_mst_atomic_payload *payload; |
| int i, ret; |
| |
| static const char *const status[] = { |
| "None", |
| "Local", |
| "DFP", |
| "Remote", |
| }; |
| |
| mutex_lock(&mgr->lock); |
| if (mgr->mst_primary) |
| drm_dp_mst_dump_mstb(m, mgr->mst_primary); |
| |
| /* dump VCPIs */ |
| mutex_unlock(&mgr->lock); |
| |
| ret = drm_modeset_lock_single_interruptible(&mgr->base.lock); |
| if (ret < 0) |
| return; |
| |
| state = to_drm_dp_mst_topology_state(mgr->base.state); |
| seq_printf(m, "\n*** Atomic state info ***\n"); |
| seq_printf(m, "payload_mask: %x, max_payloads: %d, start_slot: %u, pbn_div: %d\n", |
| state->payload_mask, mgr->max_payloads, state->start_slot, |
| dfixed_trunc(state->pbn_div)); |
| |
| seq_printf(m, "\n| idx | port | vcpi | slots | pbn | dsc | status | sink name |\n"); |
| for (i = 0; i < mgr->max_payloads; i++) { |
| list_for_each_entry(payload, &state->payloads, next) { |
| char name[14]; |
| |
| if (payload->vcpi != i || payload->delete) |
| continue; |
| |
| fetch_monitor_name(mgr, payload->port, name, sizeof(name)); |
| seq_printf(m, " %5d %6d %6d %02d - %02d %5d %5s %8s %19s\n", |
| i, |
| payload->port->port_num, |
| payload->vcpi, |
| payload->vc_start_slot, |
| payload->vc_start_slot + payload->time_slots - 1, |
| payload->pbn, |
| payload->dsc_enabled ? "Y" : "N", |
| status[payload->payload_allocation_status], |
| (*name != 0) ? name : "Unknown"); |
| } |
| } |
| |
| seq_printf(m, "\n*** DPCD Info ***\n"); |
| mutex_lock(&mgr->lock); |
| if (mgr->mst_primary) { |
| u8 buf[DP_PAYLOAD_TABLE_SIZE]; |
| int ret; |
| |
| if (drm_dp_read_dpcd_caps(mgr->aux, buf) < 0) { |
| seq_printf(m, "dpcd read failed\n"); |
| goto out; |
| } |
| seq_printf(m, "dpcd: %*ph\n", DP_RECEIVER_CAP_SIZE, buf); |
| |
| ret = drm_dp_dpcd_read(mgr->aux, DP_FAUX_CAP, buf, 2); |
| if (ret != 2) { |
| seq_printf(m, "faux/mst read failed\n"); |
| goto out; |
| } |
| seq_printf(m, "faux/mst: %*ph\n", 2, buf); |
| |
| ret = drm_dp_dpcd_read(mgr->aux, DP_MSTM_CTRL, buf, 1); |
| if (ret != 1) { |
| seq_printf(m, "mst ctrl read failed\n"); |
| goto out; |
| } |
| seq_printf(m, "mst ctrl: %*ph\n", 1, buf); |
| |
| /* dump the standard OUI branch header */ |
| ret = drm_dp_dpcd_read(mgr->aux, DP_BRANCH_OUI, buf, DP_BRANCH_OUI_HEADER_SIZE); |
| if (ret != DP_BRANCH_OUI_HEADER_SIZE) { |
| seq_printf(m, "branch oui read failed\n"); |
| goto out; |
| } |
| seq_printf(m, "branch oui: %*phN devid: ", 3, buf); |
| |
| for (i = 0x3; i < 0x8 && buf[i]; i++) |
| seq_putc(m, buf[i]); |
| seq_printf(m, " revision: hw: %x.%x sw: %x.%x\n", |
| buf[0x9] >> 4, buf[0x9] & 0xf, buf[0xa], buf[0xb]); |
| if (dump_dp_payload_table(mgr, buf)) |
| seq_printf(m, "payload table: %*ph\n", DP_PAYLOAD_TABLE_SIZE, buf); |
| } |
| |
| out: |
| mutex_unlock(&mgr->lock); |
| drm_modeset_unlock(&mgr->base.lock); |
| } |
| EXPORT_SYMBOL(drm_dp_mst_dump_topology); |
| |
| static void drm_dp_tx_work(struct work_struct *work) |
| { |
| struct drm_dp_mst_topology_mgr *mgr = container_of(work, struct drm_dp_mst_topology_mgr, tx_work); |
| |
| mutex_lock(&mgr->qlock); |
| if (!list_empty(&mgr->tx_msg_downq)) |
| process_single_down_tx_qlock(mgr); |
| mutex_unlock(&mgr->qlock); |
| } |
| |
| static inline void |
| drm_dp_delayed_destroy_port(struct drm_dp_mst_port *port) |
| { |
| drm_dp_port_set_pdt(port, DP_PEER_DEVICE_NONE, port->mcs); |
| |
| if (port->connector) { |
| drm_connector_unregister(port->connector); |
| drm_connector_put(port->connector); |
| } |
| |
| drm_dp_mst_put_port_malloc(port); |
| } |
| |
| static inline void |
| drm_dp_delayed_destroy_mstb(struct drm_dp_mst_branch *mstb) |
| { |
| struct drm_dp_mst_topology_mgr *mgr = mstb->mgr; |
| struct drm_dp_mst_port *port, *port_tmp; |
| struct drm_dp_sideband_msg_tx *txmsg, *txmsg_tmp; |
| bool wake_tx = false; |
| |
| mutex_lock(&mgr->lock); |
| list_for_each_entry_safe(port, port_tmp, &mstb->ports, next) { |
| list_del(&port->next); |
| drm_dp_mst_topology_put_port(port); |
| } |
| mutex_unlock(&mgr->lock); |
| |
| /* drop any tx slot msg */ |
| mutex_lock(&mstb->mgr->qlock); |
| list_for_each_entry_safe(txmsg, txmsg_tmp, &mgr->tx_msg_downq, next) { |
| if (txmsg->dst != mstb) |
| continue; |
| |
| txmsg->state = DRM_DP_SIDEBAND_TX_TIMEOUT; |
| list_del(&txmsg->next); |
| wake_tx = true; |
| } |
| mutex_unlock(&mstb->mgr->qlock); |
| |
| if (wake_tx) |
| wake_up_all(&mstb->mgr->tx_waitq); |
| |
| drm_dp_mst_put_mstb_malloc(mstb); |
| } |
| |
| static void drm_dp_delayed_destroy_work(struct work_struct *work) |
| { |
| struct drm_dp_mst_topology_mgr *mgr = |
| container_of(work, struct drm_dp_mst_topology_mgr, |
| delayed_destroy_work); |
| bool send_hotplug = false, go_again; |
| |
| /* |
| * Not a regular list traverse as we have to drop the destroy |
| * connector lock before destroying the mstb/port, to avoid AB->BA |
| * ordering between this lock and the config mutex. |
| */ |
| do { |
| go_again = false; |
| |
| for (;;) { |
| struct drm_dp_mst_branch *mstb; |
| |
| mutex_lock(&mgr->delayed_destroy_lock); |
| mstb = list_first_entry_or_null(&mgr->destroy_branch_device_list, |
| struct drm_dp_mst_branch, |
| destroy_next); |
| if (mstb) |
| list_del(&mstb->destroy_next); |
| mutex_unlock(&mgr->delayed_destroy_lock); |
| |
| if (!mstb) |
| break; |
| |
| drm_dp_delayed_destroy_mstb(mstb); |
| go_again = true; |
| } |
| |
| for (;;) { |
| struct drm_dp_mst_port *port; |
| |
| mutex_lock(&mgr->delayed_destroy_lock); |
| port = list_first_entry_or_null(&mgr->destroy_port_list, |
| struct drm_dp_mst_port, |
| next); |
| if (port) |
| list_del(&port->next); |
| mutex_unlock(&mgr->delayed_destroy_lock); |
| |
| if (!port) |
| break; |
| |
| drm_dp_delayed_destroy_port(port); |
| send_hotplug = true; |
| go_again = true; |
| } |
| } while (go_again); |
| |
| if (send_hotplug) |
| drm_kms_helper_hotplug_event(mgr->dev); |
| } |
| |
| static struct drm_private_state * |
| drm_dp_mst_duplicate_state(struct drm_private_obj *obj) |
| { |
| struct drm_dp_mst_topology_state *state, *old_state = |
| to_dp_mst_topology_state(obj->state); |
| struct drm_dp_mst_atomic_payload *pos, *payload; |
| |
| state = kmemdup(old_state, sizeof(*state), GFP_KERNEL); |
| if (!state) |
| return NULL; |
| |
| __drm_atomic_helper_private_obj_duplicate_state(obj, &state->base); |
| |
| INIT_LIST_HEAD(&state->payloads); |
| state->commit_deps = NULL; |
| state->num_commit_deps = 0; |
| state->pending_crtc_mask = 0; |
| |
| list_for_each_entry(pos, &old_state->payloads, next) { |
| /* Prune leftover freed timeslot allocations */ |
| if (pos->delete) |
| continue; |
| |
| payload = kmemdup(pos, sizeof(*payload), GFP_KERNEL); |
| if (!payload) |
| goto fail; |
| |
| drm_dp_mst_get_port_malloc(payload->port); |
| list_add(&payload->next, &state->payloads); |
| } |
| |
| return &state->base; |
| |
| fail: |
| list_for_each_entry_safe(pos, payload, &state->payloads, next) { |
| drm_dp_mst_put_port_malloc(pos->port); |
| kfree(pos); |
| } |
| kfree(state); |
| |
| return NULL; |
| } |
| |
| static void drm_dp_mst_destroy_state(struct drm_private_obj *obj, |
| struct drm_private_state *state) |
| { |
| struct drm_dp_mst_topology_state *mst_state = |
| to_dp_mst_topology_state(state); |
| struct drm_dp_mst_atomic_payload *pos, *tmp; |
| int i; |
| |
| list_for_each_entry_safe(pos, tmp, &mst_state->payloads, next) { |
| /* We only keep references to ports with active payloads */ |
| if (!pos->delete) |
| drm_dp_mst_put_port_malloc(pos->port); |
| kfree(pos); |
| } |
| |
| for (i = 0; i < mst_state->num_commit_deps; i++) |
| drm_crtc_commit_put(mst_state->commit_deps[i]); |
| |
| kfree(mst_state->commit_deps); |
| kfree(mst_state); |
| } |
| |
| static bool drm_dp_mst_port_downstream_of_branch(struct drm_dp_mst_port *port, |
| struct drm_dp_mst_branch *branch) |
| { |
| while (port->parent) { |
| if (port->parent == branch) |
| return true; |
| |
| if (port->parent->port_parent) |
| port = port->parent->port_parent; |
| else |
| break; |
| } |
| return false; |
| } |
| |
| static bool |
| drm_dp_mst_port_downstream_of_parent_locked(struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_port *port, |
| struct drm_dp_mst_port *parent) |
| { |
| if (!mgr->mst_primary) |
| return false; |
| |
| port = drm_dp_mst_topology_get_port_validated_locked(mgr->mst_primary, |
| port); |
| if (!port) |
| return false; |
| |
| if (!parent) |
| return true; |
| |
| parent = drm_dp_mst_topology_get_port_validated_locked(mgr->mst_primary, |
| parent); |
| if (!parent) |
| return false; |
| |
| if (!parent->mstb) |
| return false; |
| |
| return drm_dp_mst_port_downstream_of_branch(port, parent->mstb); |
| } |
| |
| /** |
| * drm_dp_mst_port_downstream_of_parent - check if a port is downstream of a parent port |
| * @mgr: MST topology manager |
| * @port: the port being looked up |
| * @parent: the parent port |
| * |
| * The function returns %true if @port is downstream of @parent. If @parent is |
| * %NULL - denoting the root port - the function returns %true if @port is in |
| * @mgr's topology. |
| */ |
| bool |
| drm_dp_mst_port_downstream_of_parent(struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_port *port, |
| struct drm_dp_mst_port *parent) |
| { |
| bool ret; |
| |
| mutex_lock(&mgr->lock); |
| ret = drm_dp_mst_port_downstream_of_parent_locked(mgr, port, parent); |
| mutex_unlock(&mgr->lock); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(drm_dp_mst_port_downstream_of_parent); |
| |
| static int |
| drm_dp_mst_atomic_check_port_bw_limit(struct drm_dp_mst_port *port, |
| struct drm_dp_mst_topology_state *state, |
| struct drm_dp_mst_port **failing_port); |
| |
| static int |
| drm_dp_mst_atomic_check_mstb_bw_limit(struct drm_dp_mst_branch *mstb, |
| struct drm_dp_mst_topology_state *state, |
| struct drm_dp_mst_port **failing_port) |
| { |
| struct drm_dp_mst_atomic_payload *payload; |
| struct drm_dp_mst_port *port; |
| int pbn_used = 0, ret; |
| bool found = false; |
| |
| /* Check that we have at least one port in our state that's downstream |
| * of this branch, otherwise we can skip this branch |
| */ |
| list_for_each_entry(payload, &state->payloads, next) { |
| if (!payload->pbn || |
| !drm_dp_mst_port_downstream_of_branch(payload->port, mstb)) |
| continue; |
| |
| found = true; |
| break; |
| } |
| if (!found) |
| return 0; |
| |
| if (mstb->port_parent) |
| drm_dbg_atomic(mstb->mgr->dev, |
| "[MSTB:%p] [MST PORT:%p] Checking bandwidth limits on [MSTB:%p]\n", |
| mstb->port_parent->parent, mstb->port_parent, mstb); |
| else |
| drm_dbg_atomic(mstb->mgr->dev, "[MSTB:%p] Checking bandwidth limits\n", mstb); |
| |
| list_for_each_entry(port, &mstb->ports, next) { |
| ret = drm_dp_mst_atomic_check_port_bw_limit(port, state, failing_port); |
| if (ret < 0) |
| return ret; |
| |
| pbn_used += ret; |
| } |
| |
| return pbn_used; |
| } |
| |
| static int |
| drm_dp_mst_atomic_check_port_bw_limit(struct drm_dp_mst_port *port, |
| struct drm_dp_mst_topology_state *state, |
| struct drm_dp_mst_port **failing_port) |
| { |
| struct drm_dp_mst_atomic_payload *payload; |
| int pbn_used = 0; |
| |
| if (port->pdt == DP_PEER_DEVICE_NONE) |
| return 0; |
| |
| if (drm_dp_mst_is_end_device(port->pdt, port->mcs)) { |
| payload = drm_atomic_get_mst_payload_state(state, port); |
| if (!payload) |
| return 0; |
| |
| /* |
| * This could happen if the sink deasserted its HPD line, but |
| * the branch device still reports it as attached (PDT != NONE). |
| */ |
| if (!port->full_pbn) { |
| drm_dbg_atomic(port->mgr->dev, |
| "[MSTB:%p] [MST PORT:%p] no BW available for the port\n", |
| port->parent, port); |
| *failing_port = port; |
| return -EINVAL; |
| } |
| |
| pbn_used = payload->pbn; |
| } else { |
| pbn_used = drm_dp_mst_atomic_check_mstb_bw_limit(port->mstb, |
| state, |
| failing_port); |
| if (pbn_used <= 0) |
| return pbn_used; |
| } |
| |
| if (pbn_used > port->full_pbn) { |
| drm_dbg_atomic(port->mgr->dev, |
| "[MSTB:%p] [MST PORT:%p] required PBN of %d exceeds port limit of %d\n", |
| port->parent, port, pbn_used, port->full_pbn); |
| *failing_port = port; |
| return -ENOSPC; |
| } |
| |
| drm_dbg_atomic(port->mgr->dev, "[MSTB:%p] [MST PORT:%p] uses %d out of %d PBN\n", |
| port->parent, port, pbn_used, port->full_pbn); |
| |
| return pbn_used; |
| } |
| |
| static inline int |
| drm_dp_mst_atomic_check_payload_alloc_limits(struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_topology_state *mst_state) |
| { |
| struct drm_dp_mst_atomic_payload *payload; |
| int avail_slots = mst_state->total_avail_slots, payload_count = 0; |
| |
| list_for_each_entry(payload, &mst_state->payloads, next) { |
| /* Releasing payloads is always OK-even if the port is gone */ |
| if (payload->delete) { |
| drm_dbg_atomic(mgr->dev, "[MST PORT:%p] releases all time slots\n", |
| payload->port); |
| continue; |
| } |
| |
| drm_dbg_atomic(mgr->dev, "[MST PORT:%p] requires %d time slots\n", |
| payload->port, payload->time_slots); |
| |
| avail_slots -= payload->time_slots; |
| if (avail_slots < 0) { |
| drm_dbg_atomic(mgr->dev, |
| "[MST PORT:%p] not enough time slots in mst state %p (avail=%d)\n", |
| payload->port, mst_state, avail_slots + payload->time_slots); |
| return -ENOSPC; |
| } |
| |
| if (++payload_count > mgr->max_payloads) { |
| drm_dbg_atomic(mgr->dev, |
| "[MST MGR:%p] state %p has too many payloads (max=%d)\n", |
| mgr, mst_state, mgr->max_payloads); |
| return -EINVAL; |
| } |
| |
| /* Assign a VCPI */ |
| if (!payload->vcpi) { |
| payload->vcpi = ffz(mst_state->payload_mask) + 1; |
| drm_dbg_atomic(mgr->dev, "[MST PORT:%p] assigned VCPI #%d\n", |
| payload->port, payload->vcpi); |
| mst_state->payload_mask |= BIT(payload->vcpi - 1); |
| } |
| } |
| |
| if (!payload_count) |
| mst_state->pbn_div.full = dfixed_const(0); |
| |
| drm_dbg_atomic(mgr->dev, "[MST MGR:%p] mst state %p TU pbn_div=%d avail=%d used=%d\n", |
| mgr, mst_state, dfixed_trunc(mst_state->pbn_div), avail_slots, |
| mst_state->total_avail_slots - avail_slots); |
| |
| return 0; |
| } |
| |
| /** |
| * drm_dp_mst_add_affected_dsc_crtcs |
| * @state: Pointer to the new struct drm_dp_mst_topology_state |
| * @mgr: MST topology manager |
| * |
| * Whenever there is a change in mst topology |
| * DSC configuration would have to be recalculated |
| * therefore we need to trigger modeset on all affected |
| * CRTCs in that topology |
| * |
| * See also: |
| * drm_dp_mst_atomic_enable_dsc() |
| */ |
| int drm_dp_mst_add_affected_dsc_crtcs(struct drm_atomic_state *state, struct drm_dp_mst_topology_mgr *mgr) |
| { |
| struct drm_dp_mst_topology_state *mst_state; |
| struct drm_dp_mst_atomic_payload *pos; |
| struct drm_connector *connector; |
| struct drm_connector_state *conn_state; |
| struct drm_crtc *crtc; |
| struct drm_crtc_state *crtc_state; |
| |
| mst_state = drm_atomic_get_mst_topology_state(state, mgr); |
| |
| if (IS_ERR(mst_state)) |
| return PTR_ERR(mst_state); |
| |
| list_for_each_entry(pos, &mst_state->payloads, next) { |
| |
| connector = pos->port->connector; |
| |
| if (!connector) |
| return -EINVAL; |
| |
| conn_state = drm_atomic_get_connector_state(state, connector); |
| |
| if (IS_ERR(conn_state)) |
| return PTR_ERR(conn_state); |
| |
| crtc = conn_state->crtc; |
| |
| if (!crtc) |
| continue; |
| |
| if (!drm_dp_mst_dsc_aux_for_port(pos->port)) |
| continue; |
| |
| crtc_state = drm_atomic_get_crtc_state(mst_state->base.state, crtc); |
| |
| if (IS_ERR(crtc_state)) |
| return PTR_ERR(crtc_state); |
| |
| drm_dbg_atomic(mgr->dev, "[MST MGR:%p] Setting mode_changed flag on CRTC %p\n", |
| mgr, crtc); |
| |
| crtc_state->mode_changed = true; |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL(drm_dp_mst_add_affected_dsc_crtcs); |
| |
| /** |
| * drm_dp_mst_atomic_enable_dsc - Set DSC Enable Flag to On/Off |
| * @state: Pointer to the new drm_atomic_state |
| * @port: Pointer to the affected MST Port |
| * @pbn: Newly recalculated bw required for link with DSC enabled |
| * @enable: Boolean flag to enable or disable DSC on the port |
| * |
| * This function enables DSC on the given Port |
| * by recalculating its vcpi from pbn provided |
| * and sets dsc_enable flag to keep track of which |
| * ports have DSC enabled |
| * |
| */ |
| int drm_dp_mst_atomic_enable_dsc(struct drm_atomic_state *state, |
| struct drm_dp_mst_port *port, |
| int pbn, bool enable) |
| { |
| struct drm_dp_mst_topology_state *mst_state; |
| struct drm_dp_mst_atomic_payload *payload; |
| int time_slots = 0; |
| |
| mst_state = drm_atomic_get_mst_topology_state(state, port->mgr); |
| if (IS_ERR(mst_state)) |
| return PTR_ERR(mst_state); |
| |
| payload = drm_atomic_get_mst_payload_state(mst_state, port); |
| if (!payload) { |
| drm_dbg_atomic(state->dev, |
| "[MST PORT:%p] Couldn't find payload in mst state %p\n", |
| port, mst_state); |
| return -EINVAL; |
| } |
| |
| if (payload->dsc_enabled == enable) { |
| drm_dbg_atomic(state->dev, |
| "[MST PORT:%p] DSC flag is already set to %d, returning %d time slots\n", |
| port, enable, payload->time_slots); |
| time_slots = payload->time_slots; |
| } |
| |
| if (enable) { |
| time_slots = drm_dp_atomic_find_time_slots(state, port->mgr, port, pbn); |
| drm_dbg_atomic(state->dev, |
| "[MST PORT:%p] Enabling DSC flag, reallocating %d time slots on the port\n", |
| port, time_slots); |
| if (time_slots < 0) |
| return -EINVAL; |
| } |
| |
| payload->dsc_enabled = enable; |
| |
| return time_slots; |
| } |
| EXPORT_SYMBOL(drm_dp_mst_atomic_enable_dsc); |
| |
| /** |
| * drm_dp_mst_atomic_check_mgr - Check the atomic state of an MST topology manager |
| * @state: The global atomic state |
| * @mgr: Manager to check |
| * @mst_state: The MST atomic state for @mgr |
| * @failing_port: Returns the port with a BW limitation |
| * |
| * Checks the given MST manager's topology state for an atomic update to ensure |
| * that it's valid. This includes checking whether there's enough bandwidth to |
| * support the new timeslot allocations in the atomic update. |
| * |
| * Any atomic drivers supporting DP MST must make sure to call this or |
| * the drm_dp_mst_atomic_check() function after checking the rest of their state |
| * in their &drm_mode_config_funcs.atomic_check() callback. |
| * |
| * See also: |
| * drm_dp_mst_atomic_check() |
| * drm_dp_atomic_find_time_slots() |
| * drm_dp_atomic_release_time_slots() |
| * |
| * Returns: |
| * - 0 if the new state is valid |
| * - %-ENOSPC, if the new state is invalid, because of BW limitation |
| * @failing_port is set to: |
| * |
| * - The non-root port where a BW limit check failed |
| * with all the ports downstream of @failing_port passing |
| * the BW limit check. |
| * The returned port pointer is valid until at least |
| * one payload downstream of it exists. |
| * - %NULL if the BW limit check failed at the root port |
| * with all the ports downstream of the root port passing |
| * the BW limit check. |
| * |
| * - %-EINVAL, if the new state is invalid, because the root port has |
| * too many payloads. |
| */ |
| int drm_dp_mst_atomic_check_mgr(struct drm_atomic_state *state, |
| struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_dp_mst_topology_state *mst_state, |
| struct drm_dp_mst_port **failing_port) |
| { |
| int ret; |
| |
| *failing_port = NULL; |
| |
| if (!mgr->mst_state) |
| return 0; |
| |
| mutex_lock(&mgr->lock); |
| ret = drm_dp_mst_atomic_check_mstb_bw_limit(mgr->mst_primary, |
| mst_state, |
| failing_port); |
| mutex_unlock(&mgr->lock); |
| |
| if (ret < 0) |
| return ret; |
| |
| return drm_dp_mst_atomic_check_payload_alloc_limits(mgr, mst_state); |
| } |
| EXPORT_SYMBOL(drm_dp_mst_atomic_check_mgr); |
| |
| /** |
| * drm_dp_mst_atomic_check - Check that the new state of an MST topology in an |
| * atomic update is valid |
| * @state: Pointer to the new &struct drm_dp_mst_topology_state |
| * |
| * Checks the given topology state for an atomic update to ensure that it's |
| * valid, calling drm_dp_mst_atomic_check_mgr() for all MST manager in the |
| * atomic state. This includes checking whether there's enough bandwidth to |
| * support the new timeslot allocations in the atomic update. |
| * |
| * Any atomic drivers supporting DP MST must make sure to call this after |
| * checking the rest of their state in their |
| * &drm_mode_config_funcs.atomic_check() callback. |
| * |
| * See also: |
| * drm_dp_mst_atomic_check_mgr() |
| * drm_dp_atomic_find_time_slots() |
| * drm_dp_atomic_release_time_slots() |
| * |
| * Returns: |
| * 0 if the new state is valid, negative error code otherwise. |
| */ |
| int drm_dp_mst_atomic_check(struct drm_atomic_state *state) |
| { |
| struct drm_dp_mst_topology_mgr *mgr; |
| struct drm_dp_mst_topology_state *mst_state; |
| int i, ret = 0; |
| |
| for_each_new_mst_mgr_in_state(state, mgr, mst_state, i) { |
| struct drm_dp_mst_port *tmp_port; |
| |
| ret = drm_dp_mst_atomic_check_mgr(state, mgr, mst_state, &tmp_port); |
| if (ret) |
| break; |
| } |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(drm_dp_mst_atomic_check); |
| |
| const struct drm_private_state_funcs drm_dp_mst_topology_state_funcs = { |
| .atomic_duplicate_state = drm_dp_mst_duplicate_state, |
| .atomic_destroy_state = drm_dp_mst_destroy_state, |
| }; |
| EXPORT_SYMBOL(drm_dp_mst_topology_state_funcs); |
| |
| /** |
| * drm_atomic_get_mst_topology_state: get MST topology state |
| * @state: global atomic state |
| * @mgr: MST topology manager, also the private object in this case |
| * |
| * This function wraps drm_atomic_get_priv_obj_state() passing in the MST atomic |
| * state vtable so that the private object state returned is that of a MST |
| * topology object. |
| * |
| * RETURNS: |
| * The MST topology state or error pointer. |
| */ |
| struct drm_dp_mst_topology_state *drm_atomic_get_mst_topology_state(struct drm_atomic_state *state, |
| struct drm_dp_mst_topology_mgr *mgr) |
| { |
| return to_dp_mst_topology_state(drm_atomic_get_private_obj_state(state, &mgr->base)); |
| } |
| EXPORT_SYMBOL(drm_atomic_get_mst_topology_state); |
| |
| /** |
| * drm_atomic_get_old_mst_topology_state: get old MST topology state in atomic state, if any |
| * @state: global atomic state |
| * @mgr: MST topology manager, also the private object in this case |
| * |
| * This function wraps drm_atomic_get_old_private_obj_state() passing in the MST atomic |
| * state vtable so that the private object state returned is that of a MST |
| * topology object. |
| * |
| * Returns: |
| * The old MST topology state, or NULL if there's no topology state for this MST mgr |
| * in the global atomic state |
| */ |
| struct drm_dp_mst_topology_state * |
| drm_atomic_get_old_mst_topology_state(struct drm_atomic_state *state, |
| struct drm_dp_mst_topology_mgr *mgr) |
| { |
| struct drm_private_state *old_priv_state = |
| drm_atomic_get_old_private_obj_state(state, &mgr->base); |
| |
| return old_priv_state ? to_dp_mst_topology_state(old_priv_state) : NULL; |
| } |
| EXPORT_SYMBOL(drm_atomic_get_old_mst_topology_state); |
| |
| /** |
| * drm_atomic_get_new_mst_topology_state: get new MST topology state in atomic state, if any |
| * @state: global atomic state |
| * @mgr: MST topology manager, also the private object in this case |
| * |
| * This function wraps drm_atomic_get_new_private_obj_state() passing in the MST atomic |
| * state vtable so that the private object state returned is that of a MST |
| * topology object. |
| * |
| * Returns: |
| * The new MST topology state, or NULL if there's no topology state for this MST mgr |
| * in the global atomic state |
| */ |
| struct drm_dp_mst_topology_state * |
| drm_atomic_get_new_mst_topology_state(struct drm_atomic_state *state, |
| struct drm_dp_mst_topology_mgr *mgr) |
| { |
| struct drm_private_state *new_priv_state = |
| drm_atomic_get_new_private_obj_state(state, &mgr->base); |
| |
| return new_priv_state ? to_dp_mst_topology_state(new_priv_state) : NULL; |
| } |
| EXPORT_SYMBOL(drm_atomic_get_new_mst_topology_state); |
| |
| /** |
| * drm_dp_mst_topology_mgr_init - initialise a topology manager |
| * @mgr: manager struct to initialise |
| * @dev: device providing this structure - for i2c addition. |
| * @aux: DP helper aux channel to talk to this device |
| * @max_dpcd_transaction_bytes: hw specific DPCD transaction limit |
| * @max_payloads: maximum number of payloads this GPU can source |
| * @conn_base_id: the connector object ID the MST device is connected to. |
| * |
| * Return 0 for success, or negative error code on failure |
| */ |
| int drm_dp_mst_topology_mgr_init(struct drm_dp_mst_topology_mgr *mgr, |
| struct drm_device *dev, struct drm_dp_aux *aux, |
| int max_dpcd_transaction_bytes, int max_payloads, |
| int conn_base_id) |
| { |
| struct drm_dp_mst_topology_state *mst_state; |
| |
| mutex_init(&mgr->lock); |
| mutex_init(&mgr->qlock); |
| mutex_init(&mgr->delayed_destroy_lock); |
| mutex_init(&mgr->up_req_lock); |
| mutex_init(&mgr->probe_lock); |
| #if IS_ENABLED(CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS) |
| mutex_init(&mgr->topology_ref_history_lock); |
| stack_depot_init(); |
| #endif |
| INIT_LIST_HEAD(&mgr->tx_msg_downq); |
| INIT_LIST_HEAD(&mgr->destroy_port_list); |
| INIT_LIST_HEAD(&mgr->destroy_branch_device_list); |
| INIT_LIST_HEAD(&mgr->up_req_list); |
| |
| /* |
| * delayed_destroy_work will be queued on a dedicated WQ, so that any |
| * requeuing will be also flushed when deiniting the topology manager. |
| */ |
| mgr->delayed_destroy_wq = alloc_ordered_workqueue("drm_dp_mst_wq", 0); |
| if (mgr->delayed_destroy_wq == NULL) |
| return -ENOMEM; |
| |
| INIT_WORK(&mgr->work, drm_dp_mst_link_probe_work); |
| INIT_WORK(&mgr->tx_work, drm_dp_tx_work); |
| INIT_WORK(&mgr->delayed_destroy_work, drm_dp_delayed_destroy_work); |
| INIT_WORK(&mgr->up_req_work, drm_dp_mst_up_req_work); |
| init_waitqueue_head(&mgr->tx_waitq); |
| mgr->dev = dev; |
| mgr->aux = aux; |
| mgr->max_dpcd_transaction_bytes = max_dpcd_transaction_bytes; |
| mgr->max_payloads = max_payloads; |
| mgr->conn_base_id = conn_base_id; |
| |
| mst_state = kzalloc(sizeof(*mst_state), GFP_KERNEL); |
| if (mst_state == NULL) |
| return -ENOMEM; |
| |
| mst_state->total_avail_slots = 63; |
| mst_state->start_slot = 1; |
| |
| mst_state->mgr = mgr; |
| INIT_LIST_HEAD(&mst_state->payloads); |
| |
| drm_atomic_private_obj_init(dev, &mgr->base, |
| &mst_state->base, |
| &drm_dp_mst_topology_state_funcs); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(drm_dp_mst_topology_mgr_init); |
| |
| /** |
| * drm_dp_mst_topology_mgr_destroy() - destroy topology manager. |
| * @mgr: manager to destroy |
| */ |
| void drm_dp_mst_topology_mgr_destroy(struct drm_dp_mst_topology_mgr *mgr) |
| { |
| drm_dp_mst_topology_mgr_set_mst(mgr, false); |
| flush_work(&mgr->work); |
| /* The following will also drain any requeued work on the WQ. */ |
| if (mgr->delayed_destroy_wq) { |
| destroy_workqueue(mgr->delayed_destroy_wq); |
| mgr->delayed_destroy_wq = NULL; |
| } |
| mgr->dev = NULL; |
| mgr->aux = NULL; |
| drm_atomic_private_obj_fini(&mgr->base); |
| mgr->funcs = NULL; |
| |
| mutex_destroy(&mgr->delayed_destroy_lock); |
| mutex_destroy(&mgr->qlock); |
| mutex_destroy(&mgr->lock); |
| mutex_destroy(&mgr->up_req_lock); |
| mutex_destroy(&mgr->probe_lock); |
| #if IS_ENABLED(CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS) |
| mutex_destroy(&mgr->topology_ref_history_lock); |
| #endif |
| } |
| EXPORT_SYMBOL(drm_dp_mst_topology_mgr_destroy); |
| |
| static bool remote_i2c_read_ok(const struct i2c_msg msgs[], int num) |
| { |
| int i; |
| |
| if (num - 1 > DP_REMOTE_I2C_READ_MAX_TRANSACTIONS) |
| return false; |
| |
| for (i = 0; i < num - 1; i++) { |
| if (msgs[i].flags & I2C_M_RD || |
| msgs[i].len > 0xff) |
| return false; |
| } |
| |
| return msgs[num - 1].flags & I2C_M_RD && |
| msgs[num - 1].len <= 0xff; |
| } |
| |
| static bool remote_i2c_write_ok(const struct i2c_msg msgs[], int num) |
| { |
| int i; |
| |
| for (i = 0; i < num - 1; i++) { |
| if (msgs[i].flags & I2C_M_RD || !(msgs[i].flags & I2C_M_STOP) || |
| msgs[i].len > 0xff) |
| return false; |
| } |
| |
| return !(msgs[num - 1].flags & I2C_M_RD) && msgs[num - 1].len <= 0xff; |
| } |
| |
| static int drm_dp_mst_i2c_read(struct drm_dp_mst_branch *mstb, |
| struct drm_dp_mst_port *port, |
| struct i2c_msg *msgs, int num) |
| { |
| struct drm_dp_mst_topology_mgr *mgr = port->mgr; |
| unsigned int i; |
| struct drm_dp_sideband_msg_req_body msg; |
| struct drm_dp_sideband_msg_tx *txmsg = NULL; |
| int ret; |
| |
| memset(&msg, 0, sizeof(msg)); |
| msg.req_type = DP_REMOTE_I2C_READ; |
| msg.u.i2c_read.num_transactions = num - 1; |
| msg.u.i2c_read.port_number = port->port_num; |
| for (i = 0; i < num - 1; i++) { |
| msg.u.i2c_read.transactions[i].i2c_dev_id = msgs[i].addr; |
| msg.u.i2c_read.transactions[i].num_bytes = msgs[i].len; |
| msg.u.i2c_read.transactions[i].bytes = msgs[i].buf; |
| msg.u.i2c_read.transactions[i].no_stop_bit = !(msgs[i].flags & I2C_M_STOP); |
| } |
| msg.u.i2c_read.read_i2c_device_id = msgs[num - 1].addr; |
| msg.u.i2c_read.num_bytes_read = msgs[num - 1].len; |
| |
| txmsg = kzalloc(sizeof(*txmsg), GFP_KERNEL); |
| if (!txmsg) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| txmsg->dst = mstb; |
| drm_dp_encode_sideband_req(&msg, txmsg); |
| |
| drm_dp_queue_down_tx(mgr, txmsg); |
| |
| ret = drm_dp_mst_wait_tx_reply(mstb, txmsg); |
| if (ret > 0) { |
| |
| if (txmsg->reply.reply_type == DP_SIDEBAND_REPLY_NAK) { |
| ret = -EREMOTEIO; |
| goto out; |
| } |
| if (txmsg->reply.u.remote_i2c_read_ack.num_bytes != msgs[num - 1].len) { |
| ret = -EIO; |
| goto out; |
| } |
| memcpy(msgs[num - 1].buf, txmsg->reply.u.remote_i2c_read_ack.bytes, msgs[num - 1].len); |
| ret = num; |
| } |
| out: |
| kfree(txmsg); |
| return ret; |
| } |
| |
| static int drm_dp_mst_i2c_write(struct drm_dp_mst_branch *mstb, |
| struct drm_dp_mst_port *port, |
| struct i2c_msg *msgs, int num) |
| { |
| struct drm_dp_mst_topology_mgr *mgr = port->mgr; |
| unsigned int i; |
| struct drm_dp_sideband_msg_req_body msg; |
| struct drm_dp_sideband_msg_tx *txmsg = NULL; |
| int ret; |
| |
| txmsg = kzalloc(sizeof(*txmsg), GFP_KERNEL); |
| if (!txmsg) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| for (i = 0; i < num; i++) { |
| memset(&msg, 0, sizeof(msg)); |
| msg.req_type = DP_REMOTE_I2C_WRITE; |
| msg.u.i2c_write.port_number = port->port_num; |
| msg.u.i2c_write.write_i2c_device_id = msgs[i].addr; |
| msg.u.i2c_write.num_bytes = msgs[i].len; |
| msg.u.i2c_write.bytes = msgs[i].buf; |
| |
| memset(txmsg, 0, sizeof(*txmsg)); |
| txmsg->dst = mstb; |
| |
| drm_dp_encode_sideband_req(&msg, txmsg); |
| drm_dp_queue_down_tx(mgr, txmsg); |
| |
| ret = drm_dp_mst_wait_tx_reply(mstb, txmsg); |
| if (ret > 0) { |
| if (txmsg->reply.reply_type == DP_SIDEBAND_REPLY_NAK) { |
| ret = -EREMOTEIO; |
| goto out; |
| } |
| } else { |
| goto out; |
| } |
| } |
| ret = num; |
| out: |
| kfree(txmsg); |
| return ret; |
| } |
| |
| /* I2C device */ |
| static int drm_dp_mst_i2c_xfer(struct i2c_adapter *adapter, |
| struct i2c_msg *msgs, int num) |
| { |
| struct drm_dp_aux *aux = adapter->algo_data; |
| struct drm_dp_mst_port *port = |
| container_of(aux, struct drm_dp_mst_port, aux); |
| struct drm_dp_mst_branch *mstb; |
| struct drm_dp_mst_topology_mgr *mgr = port->mgr; |
| int ret; |
| |
| mstb = drm_dp_mst_topology_get_mstb_validated(mgr, port->parent); |
| if (!mstb) |
| return -EREMOTEIO; |
| |
| if (remote_i2c_read_ok(msgs, num)) { |
| ret = drm_dp_mst_i2c_read(mstb, port, msgs, num); |
| } else if (remote_i2c_write_ok(msgs, num)) { |
| ret = drm_dp_mst_i2c_write(mstb, port, msgs, num); |
| } else { |
| drm_dbg_kms(mgr->dev, "Unsupported I2C transaction for MST device\n"); |
| ret = -EIO; |
| } |
| |
| drm_dp_mst_topology_put_mstb(mstb); |
| return ret; |
| } |
| |
| static u32 drm_dp_mst_i2c_functionality(struct i2c_adapter *adapter) |
| { |
| return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | |
| I2C_FUNC_SMBUS_READ_BLOCK_DATA | |
| I2C_FUNC_SMBUS_BLOCK_PROC_CALL | |
| I2C_FUNC_10BIT_ADDR; |
| } |
| |
| static const struct i2c_algorithm drm_dp_mst_i2c_algo = { |
| .functionality = drm_dp_mst_i2c_functionality, |
| .master_xfer = drm_dp_mst_i2c_xfer, |
| }; |
| |
| /** |
| * drm_dp_mst_register_i2c_bus() - register an I2C adapter for I2C-over-AUX |
| * @port: The port to add the I2C bus on |
| * |
| * Returns 0 on success or a negative error code on failure. |
| */ |
| static int drm_dp_mst_register_i2c_bus(struct drm_dp_mst_port *port) |
| { |
| struct drm_dp_aux *aux = &port->aux; |
| struct device *parent_dev = port->mgr->dev->dev; |
| |
| aux->ddc.algo = &drm_dp_mst_i2c_algo; |
| aux->ddc.algo_data = aux; |
| aux->ddc.retries = 3; |
| |
| aux->ddc.owner = THIS_MODULE; |
| /* FIXME: set the kdev of the port's connector as parent */ |
| aux->ddc.dev.parent = parent_dev; |
| aux->ddc.dev.of_node = parent_dev->of_node; |
| |
| strscpy(aux->ddc.name, aux->name ? aux->name : dev_name(parent_dev), |
| sizeof(aux->ddc.name)); |
| |
| return i2c_add_adapter(&aux->ddc); |
| } |
| |
| /** |
| * drm_dp_mst_unregister_i2c_bus() - unregister an I2C-over-AUX adapter |
| * @port: The port to remove the I2C bus from |
| */ |
| static void drm_dp_mst_unregister_i2c_bus(struct drm_dp_mst_port *port) |
| { |
| i2c_del_adapter(&port->aux.ddc); |
| } |
| |
| /** |
| * drm_dp_mst_is_virtual_dpcd() - Is the given port a virtual DP Peer Device |
| * @port: The port to check |
| * |
| * A single physical MST hub object can be represented in the topology |
| * by multiple branches, with virtual ports between those branches. |
| * |
| * As of DP1.4, An MST hub with internal (virtual) ports must expose |
| * certain DPCD registers over those ports. See sections 2.6.1.1.1 |
| * and 2.6.1.1.2 of Display Port specification v1.4 for details. |
| * |
| * May acquire mgr->lock |
| * |
| * Returns: |
| * true if the port is a virtual DP peer device, false otherwise |
| */ |
| static bool drm_dp_mst_is_virtual_dpcd(struct drm_dp_mst_port *port) |
| { |
| struct drm_dp_mst_port *downstream_port; |
| |
| if (!port || port->dpcd_rev < DP_DPCD_REV_14) |
| return false; |
| |
| /* Virtual DP Sink (Internal Display Panel) */ |
| if (drm_dp_mst_port_is_logical(port)) |
| return true; |
| |
| /* DP-to-HDMI Protocol Converter */ |
| if (port->pdt == DP_PEER_DEVICE_DP_LEGACY_CONV && |
| !port->mcs && |
| port->ldps) |
| return true; |
| |
| /* DP-to-DP */ |
| mutex_lock(&port->mgr->lock); |
| if (port->pdt == DP_PEER_DEVICE_MST_BRANCHING && |
| port->mstb && |
| port->mstb->num_ports == 2) { |
| list_for_each_entry(downstream_port, &port->mstb->ports, next) { |
| if (downstream_port->pdt == DP_PEER_DEVICE_SST_SINK && |
| !downstream_port->input) { |
| mutex_unlock(&port->mgr->lock); |
| return true; |
| } |
| } |
| } |
| mutex_unlock(&port->mgr->lock); |
| |
| return false; |
| } |
| |
| /** |
| * drm_dp_mst_aux_for_parent() - Get the AUX device for an MST port's parent |
| * @port: MST port whose parent's AUX device is returned |
| * |
| * Return the AUX device for @port's parent or NULL if port's parent is the |
| * root port. |
| */ |
| struct drm_dp_aux *drm_dp_mst_aux_for_parent(struct drm_dp_mst_port *port) |
| { |
| if (!port->parent || !port->parent->port_parent) |
| return NULL; |
| |
| return &port->parent->port_parent->aux; |
| } |
| EXPORT_SYMBOL(drm_dp_mst_aux_for_parent); |
| |
| /** |
| * drm_dp_mst_dsc_aux_for_port() - Find the correct aux for DSC |
| * @port: The port to check. A leaf of the MST tree with an attached display. |
| * |
| * Depending on the situation, DSC may be enabled via the endpoint aux, |
| * the immediately upstream aux, or the connector's physical aux. |
| * |
| * This is both the correct aux to read DSC_CAPABILITY and the |
| * correct aux to write DSC_ENABLED. |
| * |
| * This operation can be expensive (up to four aux reads), so |
| * the caller should cache the return. |
| * |
| * Returns: |
| * NULL if DSC cannot be enabled on this port, otherwise the aux device |
| */ |
| struct drm_dp_aux *drm_dp_mst_dsc_aux_for_port(struct drm_dp_mst_port *port) |
| { |
| struct drm_dp_mst_port *immediate_upstream_port; |
| struct drm_dp_aux *immediate_upstream_aux; |
| struct drm_dp_mst_port *fec_port; |
| struct drm_dp_desc desc = {}; |
| u8 upstream_dsc; |
| u8 endpoint_fec; |
| u8 endpoint_dsc; |
| |
| if (!port) |
| return NULL; |
| |
| if (port->parent->port_parent) |
| immediate_upstream_port = port->parent->port_parent; |
| else |
| immediate_upstream_port = NULL; |
| |
| fec_port = immediate_upstream_port; |
| while (fec_port) { |
| /* |
| * Each physical link (i.e. not a virtual port) between the |
| * output and the primary device must support FEC |
| */ |
| if (!drm_dp_mst_is_virtual_dpcd(fec_port) && |
| !fec_port->fec_capable) |
| return NULL; |
| |
| fec_port = fec_port->parent->port_parent; |
| } |
| |
| /* DP-to-DP peer device */ |
| if (drm_dp_mst_is_virtual_dpcd(immediate_upstream_port)) { |
| if (drm_dp_dpcd_read(&port->aux, |
| DP_DSC_SUPPORT, &endpoint_dsc, 1) != 1) |
| return NULL; |
| if (drm_dp_dpcd_read(&port->aux, |
| DP_FEC_CAPABILITY, &endpoint_fec, 1) != 1) |
| return NULL; |
| if (drm_dp_dpcd_read(&immediate_upstream_port->aux, |
| DP_DSC_SUPPORT, &upstream_dsc, 1) != 1) |
| return NULL; |
| |
| /* Enpoint decompression with DP-to-DP peer device */ |
| if ((endpoint_dsc & DP_DSC_DECOMPRESSION_IS_SUPPORTED) && |
| (endpoint_fec & DP_FEC_CAPABLE) && |
| (upstream_dsc & DP_DSC_PASSTHROUGH_IS_SUPPORTED)) { |
| port->passthrough_aux = &immediate_upstream_port->aux; |
| return &port->aux; |
| } |
| |
| /* Virtual DPCD decompression with DP-to-DP peer device */ |
| return &immediate_upstream_port->aux; |
| } |
| |
| /* Virtual DPCD decompression with DP-to-HDMI or Virtual DP Sink */ |
| if (drm_dp_mst_is_virtual_dpcd(port)) |
| return &port->aux; |
| |
| /* |
| * Synaptics quirk |
| * Applies to ports for which: |
| * - Physical aux has Synaptics OUI |
| * - DPv1.4 or higher |
| * - Port is on primary branch device |
| * - Not a VGA adapter (DP_DWN_STRM_PORT_TYPE_ANALOG) |
| */ |
| if (immediate_upstream_port) |
| immediate_upstream_aux = &immediate_upstream_port->aux; |
| else |
| immediate_upstream_aux = port->mgr->aux; |
| |
| if (drm_dp_read_desc(immediate_upstream_aux, &desc, true)) |
| return NULL; |
| |
| if (drm_dp_has_quirk(&desc, DP_DPCD_QUIRK_DSC_WITHOUT_VIRTUAL_DPCD)) { |
| u8 dpcd_ext[DP_RECEIVER_CAP_SIZE]; |
| |
| if (drm_dp_dpcd_read(immediate_upstream_aux, |
| DP_DSC_SUPPORT, &upstream_dsc, 1) != 1) |
| return NULL; |
| |
| if (!(upstream_dsc & DP_DSC_DECOMPRESSION_IS_SUPPORTED)) |
| return NULL; |
| |
| if (drm_dp_read_dpcd_caps(immediate_upstream_aux, dpcd_ext) < 0) |
| return NULL; |
| |
| if (dpcd_ext[DP_DPCD_REV] >= DP_DPCD_REV_14 && |
| ((dpcd_ext[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_PRESENT) && |
| ((dpcd_ext[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_TYPE_MASK) |
| != DP_DWN_STRM_PORT_TYPE_ANALOG))) |
| return immediate_upstream_aux; |
| } |
| |
| /* |
| * The check below verifies if the MST sink |
| * connected to the GPU is capable of DSC - |
| * therefore the endpoint needs to be |
| * both DSC and FEC capable. |
| */ |
| if (drm_dp_dpcd_read(&port->aux, |
| DP_DSC_SUPPORT, &endpoint_dsc, 1) != 1) |
| return NULL; |
| if (drm_dp_dpcd_read(&port->aux, |
| DP_FEC_CAPABILITY, &endpoint_fec, 1) != 1) |
| return NULL; |
| if ((endpoint_dsc & DP_DSC_DECOMPRESSION_IS_SUPPORTED) && |
| (endpoint_fec & DP_FEC_CAPABLE)) |
| return &port->aux; |
| |
| return NULL; |
| } |
| EXPORT_SYMBOL(drm_dp_mst_dsc_aux_for_port); |