| // SPDX-License-Identifier: GPL-2.0-only |
| /* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved. |
| */ |
| |
| #define pr_fmt(fmt) "[drm:%s:%d] " fmt, __func__, __LINE__ |
| |
| #include <linux/debugfs.h> |
| #include <linux/delay.h> |
| |
| #include "dpu_vbif.h" |
| #include "dpu_hw_vbif.h" |
| #include "dpu_trace.h" |
| |
| static struct dpu_hw_vbif *dpu_get_vbif(struct dpu_kms *dpu_kms, enum dpu_vbif vbif_idx) |
| { |
| if (vbif_idx < ARRAY_SIZE(dpu_kms->hw_vbif)) |
| return dpu_kms->hw_vbif[vbif_idx]; |
| |
| return NULL; |
| } |
| |
| static const char *dpu_vbif_name(enum dpu_vbif idx) |
| { |
| switch (idx) { |
| case VBIF_RT: |
| return "VBIF_RT"; |
| case VBIF_NRT: |
| return "VBIF_NRT"; |
| default: |
| return "??"; |
| } |
| } |
| |
| /** |
| * _dpu_vbif_wait_for_xin_halt - wait for the xin to halt |
| * @vbif: Pointer to hardware vbif driver |
| * @xin_id: Client interface identifier |
| * @return: 0 if success; error code otherwise |
| */ |
| static int _dpu_vbif_wait_for_xin_halt(struct dpu_hw_vbif *vbif, u32 xin_id) |
| { |
| ktime_t timeout; |
| bool status; |
| int rc; |
| |
| if (!vbif || !vbif->cap || !vbif->ops.get_halt_ctrl) { |
| DPU_ERROR("invalid arguments vbif %d\n", vbif != NULL); |
| return -EINVAL; |
| } |
| |
| timeout = ktime_add_us(ktime_get(), vbif->cap->xin_halt_timeout); |
| for (;;) { |
| status = vbif->ops.get_halt_ctrl(vbif, xin_id); |
| if (status) |
| break; |
| if (ktime_compare_safe(ktime_get(), timeout) > 0) { |
| status = vbif->ops.get_halt_ctrl(vbif, xin_id); |
| break; |
| } |
| usleep_range(501, 1000); |
| } |
| |
| if (!status) { |
| rc = -ETIMEDOUT; |
| DPU_ERROR("%s client %d not halting. TIMEDOUT.\n", |
| dpu_vbif_name(vbif->idx), xin_id); |
| } else { |
| rc = 0; |
| DRM_DEBUG_ATOMIC("%s client %d is halted\n", |
| dpu_vbif_name(vbif->idx), xin_id); |
| } |
| |
| return rc; |
| } |
| |
| /** |
| * _dpu_vbif_apply_dynamic_ot_limit - determine OT based on usecase parameters |
| * @vbif: Pointer to hardware vbif driver |
| * @ot_lim: Pointer to OT limit to be modified |
| * @params: Pointer to usecase parameters |
| */ |
| static void _dpu_vbif_apply_dynamic_ot_limit(struct dpu_hw_vbif *vbif, |
| u32 *ot_lim, struct dpu_vbif_set_ot_params *params) |
| { |
| u64 pps; |
| const struct dpu_vbif_dynamic_ot_tbl *tbl; |
| u32 i; |
| |
| if (!vbif || !(vbif->cap->features & BIT(DPU_VBIF_QOS_OTLIM))) |
| return; |
| |
| /* Dynamic OT setting done only for WFD */ |
| if (!params->is_wfd) |
| return; |
| |
| pps = params->frame_rate; |
| pps *= params->width; |
| pps *= params->height; |
| |
| tbl = params->rd ? &vbif->cap->dynamic_ot_rd_tbl : |
| &vbif->cap->dynamic_ot_wr_tbl; |
| |
| for (i = 0; i < tbl->count; i++) { |
| if (pps <= tbl->cfg[i].pps) { |
| *ot_lim = tbl->cfg[i].ot_limit; |
| break; |
| } |
| } |
| |
| DRM_DEBUG_ATOMIC("%s xin:%d w:%d h:%d fps:%d pps:%llu ot:%u\n", |
| dpu_vbif_name(vbif->idx), params->xin_id, |
| params->width, params->height, params->frame_rate, |
| pps, *ot_lim); |
| } |
| |
| /** |
| * _dpu_vbif_get_ot_limit - get OT based on usecase & configuration parameters |
| * @vbif: Pointer to hardware vbif driver |
| * @params: Pointer to usecase parameters |
| * @return: OT limit |
| */ |
| static u32 _dpu_vbif_get_ot_limit(struct dpu_hw_vbif *vbif, |
| struct dpu_vbif_set_ot_params *params) |
| { |
| u32 ot_lim = 0; |
| u32 val; |
| |
| if (!vbif || !vbif->cap) { |
| DPU_ERROR("invalid arguments vbif %d\n", vbif != NULL); |
| return -EINVAL; |
| } |
| |
| if (vbif->cap->default_ot_wr_limit && !params->rd) |
| ot_lim = vbif->cap->default_ot_wr_limit; |
| else if (vbif->cap->default_ot_rd_limit && params->rd) |
| ot_lim = vbif->cap->default_ot_rd_limit; |
| |
| /* |
| * If default ot is not set from dt/catalog, |
| * then do not configure it. |
| */ |
| if (ot_lim == 0) |
| goto exit; |
| |
| /* Modify the limits if the target and the use case requires it */ |
| _dpu_vbif_apply_dynamic_ot_limit(vbif, &ot_lim, params); |
| |
| if (vbif && vbif->ops.get_limit_conf) { |
| val = vbif->ops.get_limit_conf(vbif, |
| params->xin_id, params->rd); |
| if (val == ot_lim) |
| ot_lim = 0; |
| } |
| |
| exit: |
| DRM_DEBUG_ATOMIC("%s xin:%d ot_lim:%d\n", |
| dpu_vbif_name(vbif->idx), params->xin_id, ot_lim); |
| return ot_lim; |
| } |
| |
| /** |
| * dpu_vbif_set_ot_limit - set OT based on usecase & configuration parameters |
| * @dpu_kms: DPU handler |
| * @params: Pointer to usecase parameters |
| * |
| * Note this function would block waiting for bus halt. |
| */ |
| void dpu_vbif_set_ot_limit(struct dpu_kms *dpu_kms, |
| struct dpu_vbif_set_ot_params *params) |
| { |
| struct dpu_hw_vbif *vbif; |
| u32 ot_lim; |
| int ret; |
| |
| vbif = dpu_get_vbif(dpu_kms, params->vbif_idx); |
| if (!vbif) { |
| DRM_DEBUG_ATOMIC("invalid arguments vbif %d\n", vbif != NULL); |
| return; |
| } |
| |
| if (!vbif->ops.set_limit_conf || !vbif->ops.set_halt_ctrl) |
| return; |
| |
| /* set write_gather_en for all write clients */ |
| if (vbif->ops.set_write_gather_en && !params->rd) |
| vbif->ops.set_write_gather_en(vbif, params->xin_id); |
| |
| ot_lim = _dpu_vbif_get_ot_limit(vbif, params) & 0xFF; |
| |
| if (ot_lim == 0) |
| return; |
| |
| trace_dpu_perf_set_ot(params->num, params->xin_id, ot_lim, |
| params->vbif_idx); |
| |
| vbif->ops.set_limit_conf(vbif, params->xin_id, params->rd, ot_lim); |
| |
| vbif->ops.set_halt_ctrl(vbif, params->xin_id, true); |
| |
| ret = _dpu_vbif_wait_for_xin_halt(vbif, params->xin_id); |
| if (ret) |
| trace_dpu_vbif_wait_xin_halt_fail(vbif->idx, params->xin_id); |
| |
| vbif->ops.set_halt_ctrl(vbif, params->xin_id, false); |
| } |
| |
| void dpu_vbif_set_qos_remap(struct dpu_kms *dpu_kms, |
| struct dpu_vbif_set_qos_params *params) |
| { |
| struct dpu_hw_vbif *vbif; |
| const struct dpu_vbif_qos_tbl *qos_tbl; |
| int i; |
| |
| if (!params) { |
| DPU_ERROR("invalid arguments\n"); |
| return; |
| } |
| |
| vbif = dpu_get_vbif(dpu_kms, params->vbif_idx); |
| |
| if (!vbif || !vbif->cap) { |
| DPU_ERROR("invalid vbif %d\n", params->vbif_idx); |
| return; |
| } |
| |
| if (!vbif->ops.set_qos_remap) { |
| DRM_DEBUG_ATOMIC("qos remap not supported\n"); |
| return; |
| } |
| |
| qos_tbl = params->is_rt ? &vbif->cap->qos_rt_tbl : |
| &vbif->cap->qos_nrt_tbl; |
| |
| if (!qos_tbl->npriority_lvl || !qos_tbl->priority_lvl) { |
| DRM_DEBUG_ATOMIC("qos tbl not defined\n"); |
| return; |
| } |
| |
| for (i = 0; i < qos_tbl->npriority_lvl; i++) { |
| DRM_DEBUG_ATOMIC("%s xin:%d lvl:%d/%d\n", |
| dpu_vbif_name(params->vbif_idx), params->xin_id, i, |
| qos_tbl->priority_lvl[i]); |
| vbif->ops.set_qos_remap(vbif, params->xin_id, i, |
| qos_tbl->priority_lvl[i]); |
| } |
| } |
| |
| void dpu_vbif_clear_errors(struct dpu_kms *dpu_kms) |
| { |
| struct dpu_hw_vbif *vbif; |
| u32 i, pnd, src; |
| |
| for (i = 0; i < ARRAY_SIZE(dpu_kms->hw_vbif); i++) { |
| vbif = dpu_kms->hw_vbif[i]; |
| if (vbif && vbif->ops.clear_errors) { |
| vbif->ops.clear_errors(vbif, &pnd, &src); |
| if (pnd || src) { |
| DRM_DEBUG_KMS("%s: pnd 0x%X, src 0x%X\n", |
| dpu_vbif_name(vbif->idx), pnd, src); |
| } |
| } |
| } |
| } |
| |
| void dpu_vbif_init_memtypes(struct dpu_kms *dpu_kms) |
| { |
| struct dpu_hw_vbif *vbif; |
| int i, j; |
| |
| for (i = 0; i < ARRAY_SIZE(dpu_kms->hw_vbif); i++) { |
| vbif = dpu_kms->hw_vbif[i]; |
| if (vbif && vbif->cap && vbif->ops.set_mem_type) { |
| for (j = 0; j < vbif->cap->memtype_count; j++) |
| vbif->ops.set_mem_type( |
| vbif, j, vbif->cap->memtype[j]); |
| } |
| } |
| } |
| |
| #ifdef CONFIG_DEBUG_FS |
| |
| void dpu_debugfs_vbif_init(struct dpu_kms *dpu_kms, struct dentry *debugfs_root) |
| { |
| char vbif_name[32]; |
| struct dentry *entry, *debugfs_vbif; |
| int i, j; |
| |
| entry = debugfs_create_dir("vbif", debugfs_root); |
| |
| for (i = 0; i < dpu_kms->catalog->vbif_count; i++) { |
| const struct dpu_vbif_cfg *vbif = &dpu_kms->catalog->vbif[i]; |
| |
| snprintf(vbif_name, sizeof(vbif_name), "%d", vbif->id); |
| |
| debugfs_vbif = debugfs_create_dir(vbif_name, entry); |
| |
| debugfs_create_u32("features", 0600, debugfs_vbif, |
| (u32 *)&vbif->features); |
| |
| debugfs_create_u32("xin_halt_timeout", 0400, debugfs_vbif, |
| (u32 *)&vbif->xin_halt_timeout); |
| |
| debugfs_create_u32("default_rd_ot_limit", 0400, debugfs_vbif, |
| (u32 *)&vbif->default_ot_rd_limit); |
| |
| debugfs_create_u32("default_wr_ot_limit", 0400, debugfs_vbif, |
| (u32 *)&vbif->default_ot_wr_limit); |
| |
| for (j = 0; j < vbif->dynamic_ot_rd_tbl.count; j++) { |
| const struct dpu_vbif_dynamic_ot_cfg *cfg = |
| &vbif->dynamic_ot_rd_tbl.cfg[j]; |
| |
| snprintf(vbif_name, sizeof(vbif_name), |
| "dynamic_ot_rd_%d_pps", j); |
| debugfs_create_u64(vbif_name, 0400, debugfs_vbif, |
| (u64 *)&cfg->pps); |
| snprintf(vbif_name, sizeof(vbif_name), |
| "dynamic_ot_rd_%d_ot_limit", j); |
| debugfs_create_u32(vbif_name, 0400, debugfs_vbif, |
| (u32 *)&cfg->ot_limit); |
| } |
| |
| for (j = 0; j < vbif->dynamic_ot_wr_tbl.count; j++) { |
| const struct dpu_vbif_dynamic_ot_cfg *cfg = |
| &vbif->dynamic_ot_wr_tbl.cfg[j]; |
| |
| snprintf(vbif_name, sizeof(vbif_name), |
| "dynamic_ot_wr_%d_pps", j); |
| debugfs_create_u64(vbif_name, 0400, debugfs_vbif, |
| (u64 *)&cfg->pps); |
| snprintf(vbif_name, sizeof(vbif_name), |
| "dynamic_ot_wr_%d_ot_limit", j); |
| debugfs_create_u32(vbif_name, 0400, debugfs_vbif, |
| (u32 *)&cfg->ot_limit); |
| } |
| } |
| } |
| #endif |